Answers
Answer:
do good
Explanation:
do good
Related Questions
whats the biggest thing in the whole universe
Answers
Answer:
The biggest thing in the universe is a supercluster known in the universe is the Hercules-Corona Borealis Great Wall.
Explanation:
1
This question is about the Earth and its atmosphere.
Figure 1 shows the Earth and its atmosphere billions of years ago.
The boiling point of water is 100°C.
Suggest one reason why there was no liquid water on the Earth's surface billions of
years ago.
Earth's early
atmosphere of:
• carbon dioxide
• water vapour
• methane
• ammonia
Answers
Answer:
water vapour
Explanation:
allow the Earth’s surface
temperature was too/very hot
or water evaporated/ boiled
or turned to steam/gas
allow because of heat from
volcanoes
ignore the Earth’s surface
was covered by volcanoes
ignore water turned to water
vapour
Arrange the missing steps in the correct order.
Answers
Answer:
There's nothing to arrange l
How many copper atoms are in a pure copper statue with a mass of 198 kg?
Answers
Answer:
No.of copper atoms= no.of moles x No x atomicity
(No - avagardro's number )
= wt / atomic mass x No x 1
= 198 x 10 ^3 g / 63.5 x No
= 3.118 x 10^3 x 6.02 x 10^23
= 18.77 x 10^26 atoms.
One mole is 6.022x10^23 atoms.
You can use both of these to find the number of atoms.
The formula to find the amount of moles of something is "moles = grams / atomic mass"
103 kg --> 103,000 g.
103,000 divided by 63.546 = around 1620.873 moles.
All you need to do is multiply 1620.873 to 6.022x10^23 and you get the number of atoms in copper!
FIFTEEN POINTS HELP!!!!! The gravitational strength on Earth is less than the gravitational strength on Jupiter. What will happen to a satellite when it travels from Earth to Jupiter?
Its mass will increase.
Its mass will decrease.
Its weight will increase.
Its weight will decrease.
Answers
Answer:
I think it is c.
Explanation:
the weight will increase
because Jupiter has a greater gravitational strength then earth, and the mass does not change wherever you go. So the only awnser that makes sense is c, Its weight will increase.
Please tell me if I'm right or wrong, thanks :)
Read this excerpt from the play An Adventure for Detective Dennis:
Stars twinkle in the windows of the library.
What element of a play is shown in this text?
Cast of characters
Dialogue
Scene
Setting description
Answers
Answer:
the answer is Scene
Explanation:
because it is describing the atmosphere of where the book/play is taking place
Answer:
the answer is Scene
Explanation:
Which of these statements accurately describes polymers?
Polymers are macromolecules.
Polymers are simple molecules.
Polymers are made of metal atoms.
Polymers contain double bonds.
Answers
Answer:
Its A.) Polymers are macromolecules
Explanation:
Answer:
The correct answer that you are looking for is A.) Polymers are macromolecules.
A 1 kg object accelerates at a rate of 5 m/s2.
Answers
Answer:
5 N.
Explanation:
We can calculate the net force on the object by using Newton's second law of motion:
F is the net force on an object
m is the mass of the object
a is its acceleration
For the object in this problem, we have
m = 1 kg is its mass
is its acceleration
Substituting into the equation, we find the net force:
How many moles of molecular oxygen will be needed for
the complete combustion of 100.0 g of sulfur dioxide? The product of this reaction
is sulfur trioxide.
A. 0.7804 moles
B. 1.561 moles
C. 0.641 moles
D. 1.281 moles
Answers
Answer:
The answer is A. 0.7804 moles
How much energy is required when a 142.1 gram sample of aluminum goes from 25.5°C to 46°C? (the specific heat of aluminum is 0.90 J/g °C).
Answers
Answer:
2621.75 j heat is required to increase the temperature 25.5°C to 46°C.
Explanation:
Given data:
Mass of sample = 142.1 g
Initial temperature = 25.5°C
Final temperature = 46°C
Specific heat capacity of Al = 0.90 J/g.°C
Solution:
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = 46°C - 25.5°C
ΔT = 20.5°C
Q = 142.1 × 0.90 J/g.°C × 20.5°C
Q = 2621.75 j
Thus, 2621.75 j heat is required to increase the temperature 25.5°C to 46°C.
4) What type of reaction is the following?
exothermic
endothermic
not enough information given
Answers
Answer:
Endothermic
Explanation:
Notice that heat is written as part of the reactants. Therefore, heat is necessary for the reaction to proceed.
In other words, the reaction is endothermic.
Conversely, if the heat is written as part of the products, heat is released as the reaction proceeds and hence the reaction is exothermic.
4. A student heats copper metal over a flame, and it begins to react with oxygen gas (diatomic
molecule 02) in the air. A green flame is seen. Copper (11) Oxide is formed.
Word
Answers
Explanation:
Since Oxygen and Copper combine to form Copper Oxide. Therefore, this is a combination reaction
Hope this helps
80+80
help
pelase
80+2-0
Answers
Answer:
the first one would be 160 and the second 82 :)
Explanation:
Answer:
160 and 82?
Explanation:
80 plus itself is 160 and 80 plus 2 is 82 minus 0 is 82.
Electromagnetic radiation emitted from a hot object reaches it's peak at a wavelength of 8.5 x 10-7 m. What is the frequency of this radiation
Answers
Answer:
the frequency is 18
Explanation:
please mark me as the branlest hope it helps please
A student dissolves 73 g of sodium nitrate, NaNO3, in 100 mL of water and observes a clear, colorless
solution. The student begins to add more sodium nitrate to the solution and it instantly becomes a cloudy,
heterogeneous mixture. The original solution the student prepared is best described as
unsaturated
saturated
immiscible.
supersaturated
Answers
What is carbon sink and how it effects our environment?
Answers
Answer:
Explanation:
Carbon sink is basically anything that absorbs carbon from the atmosphere. Particularly, the soil, trees, plants and the ocean absorb the most carbon, which helps with greenhouse emission.
Which of the following properties of pure solvents increase when a solute is added?
a. Freezing point
b. Vapor pressure
c. Boiling point
d. Cohesion
Answers
The explanation for this is because the decrease of the vapor pressure of the solvent and it occurs when the solute is added to the solvent that made it increase in the boiling point.
Does respiration release or absorb energy?
Answers
Answer:
it releases energy
Explanation:
Answer:
It releases energy
Explanation:
The reactions involved in respiration are catabolic reactions, which break large molecules into smaller ones, releasing energy because weak high-energy bonds, in particular in molecular oxygen, are replaced by stronger bonds in the products.
which of the following provides the best analogy for an electron in an atomic orbital
Answers
Answer:
a
Explanation:
the answer is a i'm pretty sure it might be wrong tho i'm sorry
What is the specific heat of titanium if the temperature of a 36.7 g sample of titanium is increases by
4.8 °C when 91.6 J of heat is added?
Answers
Answer:
what is the initial temperature? i can answer once I know. if it doesnt say, then I dont know and I'll delete this
Describe the changes in membrane permeability that occur at the point of stimulation on the axon.
Answers
Answer:
The permeability of a membrane is affected by temperature, the types of solutes present and the level of cell hydration. Increasing temperature makes the membrane more unstable and very fluid.
Explanation:
Imagine a campfire on a cold day. At first, the temperature of each log is as cold as the air around it. A few hours after the fire has burned out, the temperature of the ashes will also be cold. But in between, when the fire is burning, the temperature of the logs and surrounding air is very hot. What is the source of this thermal energy? For the answer, begin by identifying the reactants and products for the overall chemical reaction of burning wood. Wood is mostly carbohydrates, the bulk of which is cellulose. Cellulose is made up of hundreds to thousands of glucose groups connectected by oxygen molecules. The chemical formula for cellulose is (C6H12O6)n, where n is the number of glucose groups. For more manageable models, carbohydrates will be modelled as glucose with a chemical formula of C6H12O6.
Answers
Answer:
See explanation
Explanation:
According to the first law of thermodynamics, energy can neither be created nor destroyed, but can be transformed from one form to another.
The thermal energy observed in the hot air while the fire rages is obtained from the chemical energy stored in carbohydrates(cellulose) that compose the wood material. As the wood is burnt, this chemical energy stored in chemical bonds of the wood material is converted to heat. The chemical reaction in the combustion of wood can be simply modeled as the combustion of n moles of glucose.
nC6H12O6(s) + 6nO2(g) ===> 6nCO2(g) + 6nH2O(g)
Note that n may even be thousands of glucose molecules that combine to form cellulose present in wood.
reaction of ethene with H2
Answers
Answer:
The hydrogenation of ethene
Ethene reacts with hydrogen in the presence of a finely divided nickel catalyst at a temperature of about 150°C. Ethane is produced. This is a fairly pointless reaction because ethene is a far more useful compound than ethane!
Explanation:
Eutrophication causes loss of Biodiversity”. Substantiate the statement
Answers
Eutrophication causes loss of biodiversity because many species need light to survive. It affects light penetration in the water body.
What is eutrophication?Eutrophication is a phenomenon where an aquatic environment (e.g., a lake) is enriched with minerals and nutrients.
The most common nutrients associated with eutrophication are nitrogen and phosphorus.
Eutrophication can severely affect light penetration in the water body, thereby affecting the survival of producer organisms (plants) and causing a loss of biodiversity across all trophic levels.
Learn more about Eutrophication here:
https://brainly.com/question/8499582
hello people ~
Which of the following groups contain only synthetic fibres?
A. Nylon, Terylene, Wool
B. Cotton, Polycot, Rayon
C. PVC, Polythene, Bakelite
D. Acrylic, Silk, Wool
Answers
Answer:
PVC,polythene,Bakelite
Explanation:
PVC stands for polyvinyl chloride used in pipes Polythene used as bags.Bakelite used in switchesChoose the correct products for the double replacement reaction below. Click here to access the solubility rules to determine which product, if any, forms a solid precipitate in the reaction. AgNO3 KCl Upper K l Upper Pb (Upper N Upper O Subscript 3) Subscript 2 Baseline right arrow. ? K O2 NCl KNO3 AgCl AgK ClNO3 K2NO3 AgCl2.
Answers
In both cases, the precipitates were AgCl and PbI2 respectively.
What is a precipitate?A precipitate is a solid product obtained from the reaction of two aqueous phase species. Let us now consider the two reactions listed in the question;
AgNO3(aq) + KCl(aq) ----> AgCl(s) + KNO3(aq)2KI(aq) + Pb(NO3)2 (aq) ----->PbI2(s) + 2KNO3(aq)We can see that in both cases, the precipitates were AgCl and PbI2 respectively.
Learn more about precipitates: https://brainly.com/question/24846690
Answer:
B and B
Explanation:
edge 2022
Pearls are made of calcium carbonate and can be broken down ( or dissolved ) by Hcl according to the following balanced equation :
CaCo3 + 2 HCl -> CaCl2 + H2O + CO2
What volume of 0.400 M HCl would be needed to dissolve a CaCO3 pearl which weighs 0.400 grams?
Answers
[tex]\boxed{\sf Molarity=\dfrac{Moles}{Vol\:in\:L}}[/tex]
Moles of CaCO_3:-
0.4/100=0.004mol1 mol Calcium carbonate need 2 mol HCl0.004 mol will need 0.004(2)=0.008mol HClCome to formula stated first
[tex]\\ \tt\Rrightarrow Volume=\dfrac{Moles}{Molarity}[/tex]
[tex]\\ \tt\Rrightarrow volume=\dfrac{0.008}{0.4}[/tex]
[tex]\\ \tt\Rrightarrow volume=0.02\ell=20m\ell[/tex]
Can someone tell me this? I’m rlly lost i -
Answers
Answer:
A Golgi Body
B Vacuole
C Mitocondrian
D Nucleus
E Cell membrane
Explanation:
Which of the following is a possible pH for distilled water that has lime (a base) dissolved in it?
a. 1
b. 3
c. 7
d. 9
Answers
Answer:
Explanation:
Distilled water has a pH of 7. Anything below that is acidic. One is very acidic. So a b and c cannot be the answer.
Lime is a base. That means that when it is put in water, the pH is going to be greater than 7,
The only possible answer is D
6. 0.465 mole sample of gas exerts 4.43 atm of pressure in a 2.25 L container. What is the temperature of the gas in the container?
Answers
Answer:
T = 262KExplanation:
n = 0.465
P = 4.43 atm
V = 2.25 L
T = ?
Follow this equation below
PV = nRT4.43 x 2.25 = 0.465 x 0.08206 x T
9.97 = 0.038 x T
(Dividing both sides by 0.038 to get rid of it)
T = 262K or you could say 262.4K
Hope this helps!!