Answer:
3) If number is zero, number is displayed;
Explanation:
The code snippet created is supposed to take any input number from the user (positive or negative) and print it to the console if it is less than 0. In this code the IF statement does not need an else clause and will work regardless. The System.out.println() statement does not need to be inside braces since it is a simple one line statement. Therefore, the only statement in the question that is actually true would be ...
3) If number is zero, number is displayed;
Answer:
If number is zero, number is displayed
Explanation:
Given
The above code segment
Required
What is true about the code segment
Analyzing the options, we have:
(1) Wrong statement because there is no else clause
The above statement is not a requirement for an if statement to be valid; i.e. an if statement can stand alone in a program
Hence, (1) is false
(2) The print statement must be in { }
There is only one statement (i.e. the print statement) after the if clause. Since the statement is just one, then the print statement does not have to be in {} to be valid.
Hence, (2) is false
(3) number is displayed, if input is 0
In the analysis of the program, we have: number <=0
i.e. the if statement is true for only inputs less than 0 or 0.
Hence, number will be printed and (3) is false
(4) number is displayed for positive inputs
The valid inputs have been explained in (3) above;
Hence, (4) is false.
(5) is also false
A small company with 100 computers has hired you to install a local area network. All of the users perform functions like email, browsing and Office software. In addition, 25 of them also do a large number of client/server requests into a database system. Which local area network operating system would you recommend?
Answer:
Answer to the following question is as follows;
Explanation:
Windows 7 for 100 users and Windows 8.1 for 25 users are the best options since they both enable networking and active directory, and Windows 8.1 also offers Windows server capabilities.
Winxp would therefore work for $100, but it is unsupported and has no updates.
If you wish to go with open source, you can choose Ubuntu 16 or 18 or Linux.
The message signal m(t) = 10cos(1000t) frequency modulates the carrier c(t) = 10cos(2fct). The modulation index is 10.
1) Write an expression for the modulated signal u(t).
2) What is the power of the modulated signal.
3) Find the bandwidth of the modulated signal.
Answer:
1) 10cos ( 2πfct + 10sin 2πfmt )
2) 50 watts
3) 1000 Hz
Explanation:
m(t) = 10cos(1000πt)
c(t) = 10cos(2πfct )
modulation index ( = 10
1) expression for modulated signal ( u(t) )
u(t) = Ac(cos 2πfct ) + A (cos 2πfct m(t) ) Am cos2πf mt
= 10cos 2πfct + 100 cos 2πfct cos2π500t
= 10cos ( 2πfct + 10sin 2πfmt )
2) power of modulated signal
power of modulated signal μ^2 / 2 ]
= 10^2/2 ]
= 50 watts
3) Bandwidth
B = 2fm = 2 * 500 = 1000 Hz
Which statement is NOT a source of threats?
a.
Poor management decisions, accidents and natural disasters.
b.
Data recovery
c.
financial mistakes
d.
loss of customers
Answer:
B
Explanation:
because data is phone business
The correct order to follow for a technology awareness strategy is ____________________. Group of answer choices
Answer:
a. Determine your needs
b. make the Assessments of the resources available to you,
c. do a ranking of the resources in order of their usefulness to you,
d. create or allow the time to make use of the resources.
Explanation:
technology strategy is a concept that gives the important elements of a department and how these elements can interact with each other in order to get the continuous value.
The correct order is to first determine what your needs are, then you carry out an assessment of all the resources that you have at your disposal, then you rank these resources from the most useful to the least and the last is for you to create the time that you would have to use these resources.
what is the answer to the question asked in the picture attached below
Answer:
option - b
Explanation:
i think this is the right answer..
Data-mining agents work with a _____, detecting trends and discovering new information and relationships among data items that were not readily apparent.
Answer: data warehouse
Explanation:
Data-mining agents work with a Data warehouse which helps in detecting trends and discovering new information.
A data warehouse refers to the large collection of business data that is used by organizations to make decisions. It has to do with the collection and the management of data from different sources which are used in providing meaningful business insights.
The purpose of the five-entity minimum, six-entity maximum is to establish a relatively small baseline for you to keep the scope of your database project constrained.
a. True
b. False
True or false, an implicitly unwrapped optional variable must have an exclamation mark affixed after it every time it is used. 答案选项组
Answer:
False.
Explanation:
Implicit unwrapped optional variables are those which are at option and they might be nil. It is not necessary that all implicit unwrapped optional variables should have an exclamation mark. Swift may eliminate the need for unwrapping.
provides an automated method for discovering host systems on a network. Although it doesn't necessarily discover all weaknesses, it does determine which systems are active on the network and what services they offer or what ports are available
Answer:
Network scan
Explanation:
Cyber security can be defined as preventive practice of protecting computers, software programs, electronic devices, networks, servers and data from potential theft, attack, damage, or unauthorized access by using a body of technology, frameworks, processes and network engineers.
Some examples of cyber attacks are phishing, zero-day exploits, denial of service, man in the middle, cryptojacking, malware, SQL injection, spoofing etc.
Generally, a security assessment is carried out by network security experts on a regular basis to determine potential loopholes or vulnerabilities in the information and technology (IT) infrastructure. One of the techniques or approach used in security assessment is a network scan.
A network scan is a security assessment technique used for the automatic detection of host systems on a network. Although a network scan isn't capable of discovering or detecting all the weaknesses on a network, it avails users information about the computer systems that are active on the network and what services the computer systems offer or what ports are available on them.
While configuring a wireless access point device, a technician is presented with several security mode options. Which of the following options will provide the most secure access?
Answer:
Bro this is my area the answer is WPA2 and AES
Explanation:
its because AES is a more secure encryption protocol introduced with WPA2. AES isn't some creaky standard developed specifically for Wi-Fi networks, either. It's a serious worldwide encryption standard that's even been adopted by the US government.
There are many possible variations in wireless network design depending on the surroundings.
What is wireless network?Even in a complicated single site, different wireless networks running on the same hardware as part of the broader wireless LAN environment can have different network configuration fundamentals needed for a successful deployment.
At the same time, a number of essential network configuration activities are part of any successful wireless project's typical chores. Let's look at the broad and specific procedures that wireless experts should take while setting up enterprise-grade Wi-Fi networks.
Therefore, There are many possible variations in wireless network design depending on the surroundings.
To learn more about wifi, refer to the link:
https://brainly.com/question/6145118
#SPJ5
Eureka! Is a telephone and Internet-based concierge service that specializes in obtaining things that are hard to find (e.g., Super Bowl tickets, first-edition books from the 1500s, Faberge eggs). It currently employs 60 staff members who work 24 hours per day (over three shifts). Staff answer the phone and respond to requests entered on the Eureka! Web Site. Much of their work is spent on the phone and on computers searching on the Internet. What type of connections should Eureka! consider from it’s offices to the outside world, in terms of phone and Internet? Outline the pros and cons of each alternative below and make a recommendation. The company has four alternatives:
1. Should it use traditional analog services, with standard voice lines, and use modems to dial into its ISP ($40 per month for each voice line plus $20 per month for each Internet access line)?
2. Should the company use standard voice lines but use DSL for its data ($40 per month per line for both services)?
3. Should the company separate its voice and data needs, using standard analog services for voice but finding some advanced digital transmission services for data ($40 per month for each voice line and $300 per month for a circuit with 1.5 Mbps for data)?
4. Should the company search for all digital services for both voice and data ($60 per month for an all-digital circuit that provides two PCM phone lines that can be used for two voice calls, one voice call and one data call at 64 Kbps, or one data call at 128 Kbps)?
5. Should the company invest in a modern-day fiber optic 10Mb/s flex? Research price.
NOTE: PLEASE PROVIDE DETAIL ANSWER OF THIS QUESTION.
Explanation:
Should the company separate its voice and data needs, using standard analog services for voice but finding some advanced digital transmission services for data ($40 per month for each voice line and $300 per month for a circuit with 1.5 Mbps for data)?
A computer with a five-stage pipeline deals with conditional branches by stalling for the next three cycles after hitting one. How much does stalling hurt the performance if 20% of all instructions are conditional branches
Answer:
The stalling hurt the performance by 60%.
Explanation:
This can be calculated as follows:
Value of CPI ideally taken by pipeline = 1
From the question, we are given:
Stall frequency = 20%,
Number of frequency = 3
Therefore, we have:
Cycles per instruction (CPI) of the architecture = Value of CPI ideally taken by pipeline + (Stall frequency * Number of frequency) = 1 + (20% * 3) = 1.60
Amount by which the stalling hurt the performance = Cycles per instruction (CPI) of the architecture Value of CPI ideally taken by pipeline = 1 - 0.60 = 0.60, or 60%
Therefore, the stalling hurt the performance by 60%.
Which attack form either exploits a software flaw or floods a system with traffic in order to prevent legitimate activities or transactions from occurring?
Answer:
Denial of service attack.
Explanation:
In Cybersecurity, vulnerability can be defined as any weakness, flaw or defect found in a software application or network and are exploitable by an attacker or hacker to gain an unauthorized access or privileges to sensitive data in a computer system.
This ultimately implies that, vulnerability in a network avail attackers or any threat agent the opportunity to leverage on the flaws, errors, weaknesses or defects found in order to compromise the security of the network.
Data theft can be defined as a cyber attack which typically involves an unauthorized access to a user's data with the sole intention to use for fraudulent purposes or illegal operations. There are several methods used by cyber criminals or hackers to obtain user data and these includes DDOS attack, SQL injection, man in the middle, phishing, sniffing, DOS attack, etc.
A denial of service (DOS) attack is a form of cyber attack that involves either the exploitation of a software flaw or overwhelmingly floods a computer system in a network with traffic in order to prevent authorized users from performing legitimate activities or transactions.
Some of the ways to prevent vulnerability or cyber attacks in a network are;
1. Ensure you use a very strong password with complexity through the use of alphanumerics.
2. You should use a two-way authentication service.
3. You should use encrypting software applications or services.
____________________ are designed according to a set of constraints that shape the service architecture to emulate the properties of the World Wide Web, resulting in service implementations that rely on the use of core Web technologies (described in the Web Technology section).
Answer: Web services
Explanation:
Web service refers to a piece of software which uses a XML messaging system that's standardized and makes itself available over the internet.
Web services provides standardized web protocols which are vital for communication and exchange of data messaging throughout the internet.
They are are designed according to a set of constraints which help in shaping the service architecture in order to emulate the properties of the World Wide Web.
Answer:
The correct approach is "REST Services".
Explanation:
It merely offers accessibility to commodities as well as authorization to REST customers but also alters capabilities or sources.
With this technique, all communications are generally assumed to be stateless. It, therefore, indicates that the REST resource actually may keep nothing between runs, which makes it useful for cloud computing.Given below are some facts and predicates for some knowledge base (KB). State if the unification for either variable x or y is possible or not. If the unification is possible then show the unified values for variables x and y.
a. American (Bob), American (y)
b. Enemy (Nono, America), Enemy(x,y)
c. Weapon (Missile), soldTo (Missile, y), Weapon (x), soldTo (x, Nono)
d. L(x, y), (L(y, x) ^ L(A, B))
Answer:
Unification may be a process by which two logical individual atomic expressions, identical by replacing with a correct substitution. within the unification process, two literals are taken as input and made identical using the substitution process. There are some rules of substitution that has got to be kept in mind:
The predicate symbol must be an equivalent for substitution to require place.
The number of arguments that are present in both expressions must be equivalent.
Two similar variables can't be present within the same expression
Explanation:
a. American (Bob), American (y):-
In this scenario, Unification is feasible consistent with the principle. The substitution list is going to be [y/Bob].
b. Enemy (Nono, America), Enemy(x,y):-
In this scenario, the Unification is feasible consistent with the principles. The substitution list is going to be [x/Nono, y/America].
c. Weapon (Missile), soldTo (Missile, y), Weapon (x), soldTo (x, Nono):-
In this scenario, the Unification isn't possible because the predicate is different i.e. Weapon and soldTo.
d. L(x, y), (L(y, x) ^ L(A, B)):-
In this scenario, Unification isn't possible because the number of arguments is different within the given expression
3. Most widely used structure for recording database modifications is called
A. Scheduling
B. Buffering
C. Log
D. Blocking
Answer:
C. log
Explanation:
The log is a sequence of log records, recording all the update activities in the database
hope this helps
Answer:
C. Log is the
answer
Explanation:
a sequence of log records recording all update activity in database
write a program that assigns values to
three variables, assigns the sum (adds
the three values to a variable called
total and prints total.
Explanation:
10:A program that assigns the sum 20,30,40
20: input 20,30,40
30:sum input
40: print total
End
In this technique, each attribute is associated with a specific feature of a face, and the attribute value is used to determinethe way a facial feature is expressed. This technique is called._______________
Answer:
Chernoff faces.
Explanation:
Chernoff faces is a data visualization technique that was developed by a statistician named Herman Chernoff. He introduced this data visualization technique to the world in 1973 to represent multivariate or multidimensional data containing at least eighteen (18) variables.
In Chernoff faces, each attribute is associated with a specific feature of a face (nose, eyes, ears, hair, mouth, and eyebrows), and the attribute value with respect to size, shape, orientation, colour and placement is used to determine the way a facial feature is expressed.
The Chernoff face is a technique designed and developed to help detect similarities between different items and discern subtle changes in facial expressions from the perspective of an observer.
Which control program flow options runs to the end of the code block and resumes the break mode at the statement that follows?
Answer:
Step Out
Explanation:
In the field of computer science, the control flow or the flow of control is defined as the order where the individual statements, [tex]\text{function calls}[/tex] or instructions of a program are [tex]\text{evaluated or executed. }[/tex]
The Step Out control flow program runs to the [tex]\text{end of the code block}[/tex] and it resumes the [tex]\text{break mode}[/tex] at the statement that it follows.
Switched Ethernet, similar to shared Ethernet, must incorporate CSMA/CD to handle data collisions. True False
Answer:
False
Explanation:
The Carrier-sense multiple access with collision detection (CSMA/CD) technology was used in pioneer Ethernet to allow for local area networking. Carrier-sensing aids transmission while the collision detection feature recognizes interfering transmissions from other stations and signals a jam. This means that transmission of the frame must temporarily stop until the interfering signal is abated.
The advent of Ethernet Switches resulted in a displacement of the CSMA/CD functionality.
A retail department store is approximately square, 35 meters (100 feet) on each side. Each wall has two entrances equally spaced apart. Located at each entrance is a point-of-sale cash register. Suggest a local area network solution that interconnects all eight cash registers. Draw a diagram showing the room, the location of all cash registers, the wiring, the switches, and the server. What type of wiring would you suggest?
Answer:
The use of twisted pair cable ( category 5e/6 ) to connect the computers on each register and also the use of switches to connect each register to the server
Explanation:
The local area network ( LAN ) solution that will be used to interconnect all the POS registers is ; The use of twisted pair cable ( category 5e/6 ) to connect the computers on each register and also the use of switches to connect each register to the server .
This is because category 5e/6 twisted pair cable has a data rate transfer of up to 10 Mbps and it is best used for LAN connections
while The function of the three switches is to connect each cash register to the the central server been used .
attached below is a schematic representation
This means that the surface area is composed of the base area (i.e., the area of bottom square) plus the side area (i.e., the sum of the areas of all four triangles). You are given the following incomplete code to calculate and print out the total surface area of a square pyramid: linclude > h: base azea- calcBasekrea (a) : cout << "Base auxface area of the squaze pyzamid is" << base area << "square feet."< endi: // add your funetion call to calculate the side ares and assign // the zesult to side area, and then print the result //hdd your function call to print the total surface area return 0F float calcBaseArea (float a) return pou (a, 2) /I add your function definicion for calcSideärea here // add your function definition tor prntSurfârea here This code prompts for, and reads in the side length of the base (a) and height of a square pyramid (h) in feet, and then calculates the surface area. The function prototype (i.e. function declaration), function definition, and function call to calculate and print the base area has already been completed for you. In the above program, a and h are declared in the main function and are local to main. Since a is a local variable, notice how the length a must be passed to calcBaseArea to make this calculation. One of your tasks is to add a new function called calesidearea that computes and returns the side area of the square pyramid. Given that the formula uses both the length a and height h of the square pyramid, you must pass these two local variables to this function. You will assign the returned value of this function to side area and then print the value to the terminal. Refer to what was done for calcBaseArea when adding your code. Your other task is to add a new function called prntsprfArea that accepts the base area and side area values (i.e, these are the parameters) and prints out the total surface area of the square pyramid inside this function. Since this function does not return a value to the calling function, the return type of this function should be void Now, modify the above program, referring to the comments included in the code. Complete the requested changes, and then save the file as Lab7A. opp, making sure it compiles and works as expected. Note that you will submit this file to Canvas
Answer:-
CODE:
#include <iostream>
#include<cmath>
using namespace std;
float calcBaseArea(float a);
float calcSideArea(float s,float l);
void prntSprfArea(float base_area,float side_area);
int main()
{
float h;
float a;
float base_area
float side_area;
cout<<"Enter the side length of the base of the square pyramid in feet : ";
cin>>a;
cout<<"Enter the height of the square pyramid in feet : ";
cin>>h;
base_area=calcBaseArea(a);
side_area=calcSideArea(a,h);
cout<<"Base surface area of the square pyramid is "<<base_area<<" square feet. "<<endl;
cout<<"Side area of the square pyramid is "<<side_area<<" square feet."<<endl;
prntSprfArea(base_area,side_area);
return 0;
}
float calcBaseArea(float a)
{
return pow(a,2);
}
float calcSideArea(float s,float l)
{
float area=(s*l)/2;
return 4*area;
}
void prntSprfArea(float base_area,float side_area)
{
cout<<"Total surface area of the pyramid is "<<base_area+side_area<<" square feet.";
OUTPUT:
Resize vector countDown to have newSize elements. Populate the vector with integers {newSize, newSize - 1, ..., 1}. Ex: If newSize = 3, then countDown = {3, 2, 1}, and the sample program outputs:
#include
#include
using namespace std;
int main() {
vector countDown(0);
int newSize = 0;
int i = 0;
newSize = 3;
STUDENT CODE
for (i = 0; i < newSize; ++i) {
cout << countDown.at(i) << " ";
}
cout << "Go!" << endl;
return 0;
}
Answer:
Following are the code to the given question:
#include <iostream>//defining header file
#include <vector>//defining header file
#include <numeric>//defining header file
using namespace std;
int main()//main method
{
vector<int> countDown(0);//defing an integer array variable countDown
int newSize = 0;//defing an integer variable newSize that holds a value 0
int i = 0;//defing an integer variable i that initialize with 0
newSize = 3;// //use newSize to hold a value
countDown.resize(newSize,0);// calling the resize method that accepts two parameters
for (i = 0; i < newSize; ++i)//defining a loop that reverse the integer value
{
countDown[i] = newSize -i;//reverse the value and store it into countDown array
cout << countDown.at(i) << " ";//print reverse array value
}
cout << "Go!" << endl;//print message
return 0;
}
Output:
3 2 1 Go!
Explanation:
In the given code inside the main method an integer array "countDown" and two integer variables "newSize and i" is declared that initializes a value that is 0.
In the next step, an array is used that calls the resize method that accepts two parameters, and define a for a loop.
In this loop, the array is used to reverse the value and print its value with the message.
Please use thread to complete the following program: one process opens a file data.txt, then creates a thread my_thread. The job of the thread my_thread is to count how many lines exist in the file data.txt, and return the number of lines to the calling process. The process then prints this number to the screen.
Basically, you need to implement main_process.c and thread_function.c.
Basic structure of main_process.c:
int main ()
{
Open the file data.txt and obtain the file handler fh;
Create a thread my_thread using pthread_create; pass fh to my_thread;
Wait until my_thread terminates, using pthread_join;
Print out how many lines exist in data.txt.}
Basic structure of thread_function.c:
void *count_lines(void *arg)
{
Obtain fh from arg;
Count how many lines num_lines exist in fh;
Close fh;
Return num_lines
}
Answer:
Here is the code:-
//include the required header files
#include<stdio.h>
#include<pthread.h>
// method protocol definition
void *count_lines(void *arg);
int main()
{
// Create a thread handler
pthread_t my_thread;
// Create a file handler
FILE *fh;
// declare the variable
int *linecnt;
// open the data file
fh=fopen("data.txt","r");
// Create a thread using pthread_create; pass fh to my_thread;
pthread_create(&my_thread, NULL, count_lines, (void*)fh);
//Use pthread_join to terminate the thread my_thread
pthread_join( my_thread, (void**)&linecnt );
// print the number of lines
printf("\nNumber of lines in the given file: %d \n\n", linecnt);
return (0);
}
// Method to count the number of lines
void *count_lines(void *arg)
{
// variable declaration and initialization
int linecnt=-1;
char TTline[1600];
//code to count the number of lines
while(!feof(arg))
{
fgets(TTline,1600,arg);
linecnt++;
}
pthread_exit((void *)linecnt);
// close the file handler
fclose(arg);
}
Explanation:
Program:-
hub stake should always be provided with a lath stake so that the information about what the hub represents can be written on the lath stake True False
Answer:
True
Explanation:
To protect them from becoming disturbed by construction operations, hub stakes are placed on both sides of a roadway at a certain distance outside the work zone. The final stakes are connected to the hub stakes, which are used to write the essential information.
As a result, hub stakes are always accompanied with stakes.
Can you suggest a LinkedIn Helper (automation tool) alternative?
Answer:
Have you tried LinkedCamp alternative to LinkedIn Helper?
Well, LinkedCamp is a super-efficient cloud-based LinkedIn Automation Tool that empowers businesses and sales industries to drive more LinkedIn connections, hundreds of leads, sales, and conversions automatically.
Some other LinkedIn automation tools are:
Meet Alfred Phantombuster WeConnect ZoptoExpandiHope you find it useful.
Good luck!
Write a program in Cto define a structure Patient that has the following members
Answer:
Explanation:
The answer should be 1.16 or 61.1
what its the difference between Arduinos and Assembler?
Answer:
The Arduino boards can be programmed in assembly. All you need is an ICSP Cable (In Circuit Serial Programmer) and the AVR toolchain (free from ATMEL) to write to the board. You then get the advantage of on board debugging.
As you suggested, you can just slap an ATMEL chip on a breadboard and go to town.
Explanation: cause i said so
Create and configure databases in oracle database management system operation administration
Answer:
You typically create a database during Oracle Database software installation. However, you can also create a database after installation.
Reasons to create a database after installation are as follows:
You used Oracle Universal Installer (OUI) to install software only, and did not create a database. You want to create another database (and database instance) on the same host computer as an existing Oracle database. In this case, this chapter assumes that the new database uses the same Oracle home as the existing database. You can also create the database in a new Oracle home by running OUI again. You want to make a copy of (clone) a database.
Which of the following are issues in data integration? (which would actually cause conflicts) Question 4 options: Two different databases may have different column names for the same actual information (e.g. customer ID vs customer-id). Databases on related subjects that you want to integrate may have different numbers of columns or rows. An attribute named 'weight' may be in different units in different databases. There may be discrepancies between entries in two different databases for the same actual real-life entity (e.g. for an employee).
Answer:
The observed issues in data integration include the following from the listed options:
Two different databases may have different column names for the same actual information (e.g. customer ID vs customer-id).
There may be discrepancies between entries in two different databases for the same actual real-life entity (e.g. for an employee).
Explanation:
Data integration aims at consolidating data from disparate sources into a single dataset provide users with consistent access to data that will meet their various needs. However, the process of data integration faces many challenges. One of the challenges is disparate data formats and sources. There is also the velocity or speed at which data are gathered. For successful data integration, the different datasets need to be cleaned and updated with quality data.