Water flows naturally under pressure from an artesian well without the need for pumping.
What causes pressure in an artesian well?A well that can bring water to the surface without a pump is known as an artesian well. This happens when the aquifer's positive pressure is high enough to force the water to the surface. This positive pressure is brought on by the confinement of an artesian aquifer between impermeable rocks or clay.
Free-flowing spring water that springs from underground wells is known as artesian water. Water in artesian wells rises to the surface naturally owing to pressure, unlike conventional wells that require a pump.
When water seeps into a porous rock material, such as limestone, sand, or gravel, artesian wells are created. Simply doing this wouldn't cause water to rise. But when a thick rock layer surrounds the porous earth.
To learn more about pressure refer to:
brainly.com/question/15079200
#SPJ4
how many electrons are on the move in a circuit where a current of 2.0 A flows for 2.0 minutes?
The number of electrons that move in a circuit where a current of 2.0 A flows for 2.0 minutes will be [tex]1.5X10^2^2[/tex]. The correct option is C.
What is current?Electrical charge carriers, often electrons or atoms deficient in electrons, travel as current. The capital letter I is a typical way to represent current.
A current of 2A passes through a wire for 20 minutes. The number of electrons that crossed the cross-section in this period is
Given that,
Current =2A
Time t= 20min = 20×60s
Let,
n and e be the number and charge of electrons in time t.
So,
The total charge, q(say) in the wire is
q = ne
Hence, the current flowing in time t is
I = q/t
I = ne/t
n = It/e
[tex]n=\frac{2(20X60)}{1.6X10^{-19}} \\\\n=\frac{2400}{1.6X10^{-19}}\\\\n=1.5X10^{22}[/tex]
Thus, the answer is [tex]1.5X10^2^2[/tex], means the correct option is C.
For more details regarding current, visit:
https://brainly.com/question/13076734
#SPJ1
Your question seems incomplete, the missing options are:
[tex]1.5X10^{21}\\\\1.5X10^{20}\\\\1.5X10^{22}\\\\1.5X10^{21}\\\\1.5X10^{23}[/tex]
If the material fails when the average normal stress reaches 120 psi, determine the largest centrally applied vertical load p the block can support
Determine the highest centrally applied vertical load p the block can support if the material breaks when the average normal stress reaches 120 psi.
What is meant by material?Objects are made of material, which is a substance or combination of substances. Material can be either pure or impure, made of living things or inanimate objects. Materials can be categorized based on their chemical and physical makeup, as well as their geological or biological origin.The term "material" describes a substance used to create another object. Cloth or other things made of matter that are real-world objects are likewise considered to be materials. The adjective and noun material can be used in a wide variety of contexts.Students can choose to specialize in materials physics as part of their physics degree, which prepares them for high-tech jobs in fields including optical fibers, alternative energy sources, communications, transportation, electronics, and medicine.To learn more about material refer to:
https://brainly.com/question/27813161
#SPJ4
Two charged particles are located on the x axis. The first is a charge +Q at x = -a. The second is an unknown charge located at x = +3a. The net electric field these charges produce at the origin has a magnitude of 2keQ / a2. What are the two possible values of the unknown charge?
I honestly have absolutely no idea where to begin solving this problem. I know the equation for the electric field (kQ/r2), but I have no idea how to work with the information given to get a net electric force. Can anyone show me where to start?
Two charged particles are located on the x axis.
What are charged particles?
Charged particles are particles that have either a positive or negative electrical charge. These particles can be found in many forms in nature, such as electrons, protons, and ions. These particles are a key component of electricity, and can be used as a source of energy. Charged particles can be found in atoms and molecules, where they interact with other particles and affect their behavior. They can also be found in plasma, a state of matter that is made up of ions and electrons.
1. Start by writing out the equation for the electric field at the origin:
E = (kQ)/r^2
2. Substitute in the values for Q, k, and r, and solve for the unknown charge:
E = (2keQ)/a^2
E = (2k(+Q))/(3a)^2
+Q = (2kE)/(3a)^2
Since the electric field has a magnitude of 2keQ / a2, the unknown charge can be either positive or negative:
+Q = ±(2kE)/(3a)^2
To know more about charged particles,
https://brainly.com/question/10183222
#SPJ4
What is the difference between the weight of an object and the mass of an object?
A body's mass is the total amount of its material. Gravitational pull on a body is represented by weight.
What is the difference between mass and weight?The relationship between mass and weight Mass is a measure of inertia, whereas weight is a measure of force.
Both of these names are frequently used in the same sentence. Calculating how much matter a body contains requires knowing its mass.
Weight is a unit of measurement for the force that gravity's acceleration has on a mass.
Weight is a measurement of how the force of gravity works upon a mass, whereas mass is a measure of the amount of matter in a material.
In order to determine how much matter a body contains, we need to use its mass.
To learn more about mass and weight refer to:
brainly.com/question/1966951
#SPJ4
The power needed to accelerate a projectile from rest to its launch speed v in a time t is 39.4 W. How much power is needed to accelerate the same projectile from rest to a launch speed of 2v in a time of
The same projectile needs the power to accelerate from rest to a launch speed of 2v at a time of 219.6 W.
Calculation-power P = work/time
= ½mv² / t
P' = ½m(2v)²/t
= 4 * ½mv² / t
= 4 * P
so
P' = 4 * 54.9W
= 219.6 W (or 220 W rounded off)
What is the projectile's acceleration at the pinnacle of its trajectory?As a result, from the moment the projectile is hurled, through its greatest point, and until it touches the earth, its acceleration is 9.81 meters per second per second, or equal to the acceleration caused by gravity.
to know more about accelerating here:
brainly.com/question/12550364
#SPJ4
2. Why might it be beneficial for a photographer to have a polarizing filter for their camera when taking pictures outdoors
A polarizing filter can be beneficial for a photographer when taking outdoor pictures because it can reduce glare and reflections from surfaces such as water and glass.
it can also enhance colors, darken blue skies, and reduce the amount of light entering the lens, allowing for more even exposure. This can be especially useful in situations where the sun is very bright and can create harsh shadows and overexposed highlights. The polarizing filter can also reduce the amount of haze in the atmosphere, which can improve the overall clarity of the image. These effects can help a photographer capture more vivid and detailed images, making them stand out from the crowd.
to know more about polarizing filters refer to the link brainly.com/question/13963189
#SPJ4
a person who believes that nothing is known or can be known of the existence or nature of God or of anything beyond material phenomena; a person who claims neither faith nor disbelief in God.
In 2009, there were 3,494 radio stations across the united states. Radio became a common device for transmitting and receiving signals?
In the United States, there were 3,494 radio broadcasting stations in 2009. Radio reaches approximately 68 percent of American customers aged 12 and older on average each day, and 236 million people listen to radio every week, according to records.
Since their beginnings at the turn of the 20th century, radio stations in the United States have changed. Following the establishment of 8MK in Detroit in 1920, thousands of private and public radio stations have operated across the country. There are several different ways to organise the lists of radio stations in the US.
The Federal Communications Commission oversees radio transmission in the US (FCC). Various broadcasting services, including the following, have been produced under the AM broadcast band, which runs from 540 to 1700 kHz, is where radio transmission initially gained popularity in the 1920s.
To know more about radio
https://brainly.com/question/15308544
#SPJ4
A grocery shopper tosses a(n) 9.0 kg bag of rice into a stationary 19.1 kg grocery cart. The bag hits the cart with a horizontal speed of 6.7 m/s toward the front of the cart. What is the final speed of the cart and bag
The speed with which the cart and bag move after the collision is equal to 2.14 m/s.
Given the following data:
Mass of bag = 9.0 kg
Speed of bag = 6.7 m/s
Mass of cart = 19.1 kg
Speed of cart = 0 m/s (since it is initially at rest or stationary).
To calculate the final speed with which the cart and bag move after the collision:
Applying the law of conservation of momentum, the collision between the cart and bag is given by the formula:
Where:
M is the mass.
V is the velocity.
Substituting the given parameters into the formula, we have;
9.0 × 6.7 + 19.1 × 0 = Vf (9+19.1)
60.3 = vf (28.1)
vf = 60.3/28.1
vf = 2.14 m / s
To know more about speed of the cart visit:
https://brainly.com/question/15104105
#SPJ4
Light demonstrates the characteristics of _______________. particles only waves only both photons and particles both waves and particles
Both the features of waves and particles can be seen in light.only photons and particles only photons and particles, only waves.
Photons are they both waves and particles?Both a wave as well as a particle description of light are possible.The dual character of light has been highlighted in particular by two investigations.When we consider that light is composed of tiny particles, we refer to those particles as "photons."
What are waves and particles both?The following is the image for 'photons & particles combining waves and particles'.While electromagnetic radiation behaves both like a wave and a particle at the same time, it propagates according to linear wave equations and can only be released or absorbed in discrete pieces.
To know more about particles visit:
https://brainly.com/question/2288334
#SPJ4
What is the hypothesis of thermal energy transfer?
The heat transfer theory attempts to anticipate the energy transfer that may occur between material bodies as a result of temperature differential. Conduction, convection, and radiation are the three processes through which heat may be moved from one location to another.
Heat transfer is a thermal engineering subject that deals with the creation, consumption, conversion, and exchange of thermal energy (heat) across physical systems.
Heat transmission techniques include thermal conduction, thermal convection, thermal radiation, and energy transfer via phase shifts. To achieve heat transfer, engineers also address the transfer of mass of different chemical species (mass transfer in the form of advection), either cold or hot. While these processes have separate properties, they frequently occur in the same system at the same time.
Learn more about thermal energy to visit this link
https://brainly.com/question/18989562
#SPJ4
Margy is trying to improve her cardio endurance by performing an exercise in which she alternates walking and running 100.0 m each. If Margy is walking at 1.4 m/s and accelerates at 0.20 m/s2 during one of the running portions, what is her final velocity at the end of the 100.0 m
She moves at 6.5 m/s as her final speed after running 100 meters.
Acceleration or velocity, according to m/s 2?The velocity change of an object per unit of time is known as acceleration. Amounts of acceleration are measured in meters per second squared (m/s2), the SI unit of acceleration. For instance, due to Earth's gravity, a falling object accelerates at a rate of 9.8 m/s2.
A straight-line motion issue looks something like this. These formulas are used to determine the final velocity:
s = Vo*t + (1/2)*a*at2, and Vf = Vo + at
Where:
Vf = = final speed =?
1.4 m/s is the initial velocity, and 0.20 m/s is the acceleration.
100m displacement in 2 seconds.
the first equation is changed by:
100 = 1.4t + (1/2)*0.2*t^2\st = 25.388s
Vf = 1.4 + 0.2 can be used as a replacement in the second equation.
Vf = 6.5m/s
To know more about cardio exercise visit:-
https://brainly.com/question/1311324
#SPJ4
Which of the following statements regarding heat is accurate? NEED ASAP
In fact, in the absence of air resistance, the amount of ____ energy when the ball is held motionless above the floor equals the amount of ____ energy at impact with the floor.
the following blanks are gravitational potential energy and kinetic energy
Gravitational potential energy is the energy that an object has due to its position in a gravitational field.It is given by the equation Ep = mgh, where m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object above a reference point. Kinetic energy is the energy an object possesses by virtue of its motion. It is given by the equation Ek = 1/2mv^2, where m is the mass of the object and v is its velocity.
learn more about Kinetic energy here:
https://brainly.com/question/26472013
#SPJ4
What type of resource is solar and wind?
Solar and wind are renewable resource types.
A renewable resource is an energy source that comes from nature. This is renewable and unlimited. It can be created by utilizing increasingly sophisticated technological developments so that it can become an alternative energy source.
Apart from solar and wind power, renewable energy can also be obtained from hydropower, geothermal, biomass, solar power, wind power, sea heat, waves, and tidal.
Some of the benefits of renewable resources are:
• Minimizing the effects of global warming
• Unlimited energy sources
• Save resources as well as expenses
• In several countries it can create jobs and opportunities
• Easier and cheaper maintenance
• Some technologies are easy to implement in remote areas.
More about Renewable Resources on:
https://brainly.com/question/19604560
#SPJ4
The Sun's path, as viewed from the equator, is highest in the sky on _____. A) the spring and fall equinoxes B) the winter solstice. C) the summer solstice D) the day when Earth is closest to the Sun
The correct option is A, the Sun's path, as viewed from the equator, is highest in the sky on the spring and fall equinoxes.
Fall equinox is an astronomical event that marks the transition from summer to autumn in the Northern Hemisphere and from winter to spring in the Southern Hemisphere. On the day of the fall equinox, the sun rises directly in the east and sets directly in the west. This marks the end of the summer season and the beginning of the autumn season. During the fall equinox, all areas of the Earth experience nearly the same amount of daylight and darkness.
The fall equinox occurs in the middle of September in the Northern Hemisphere and in the middle of March in the Southern Hemisphere. It is the first day of autumn and the last day of summer in the Northern Hemisphere and the first day of spring and the last day of winter in the Southern Hemisphere.
The fall equinox marks the return of balance after the summer solstice, during which the days are the longest and the nights are the shortest. During the fall equinox, the day and night are of equal length and the sun is directly over the equator. After the fall equinox, the days become gradually shorter and the nights become gradually longer.
To learn more about Fall equinoxes visit here:
brainly.com/question/907434
#SPJ4
The Jendrassik maneuver is sometimes used when a subject needs to be distracted, and usually results in a larger reflex test response. Was this true for you? Explain what happened
he JM will heighten (exaggerate) lower limb tendon reflexes by countering some of the normal descending inhibition the brain sends to the reflex arc.
What happens during the Jendrassik maneuver?A medical technique called the Jendrassik manoeuvre involves the patient clenching their teeth, flexing both sets of fingers into a hook-like shape, and interlocking those sets of fingers. The patellar reflex is then induced by striking the tendon below the patient's knee with a reflex hammer.
When the technique is not being used, the reflex outcome of the same movement is compared to the induced reaction. When a patient is focused on the technique, a bigger reflex reaction is frequently seen: "Afferent activity brought on by such muscle tension may activate a weak or seemingly absent reflex.
This is the actual justification for the procedure, not that it is intended to divert the patient's attention, a common misperception that persists to this day." This result
To be learn more about procedure refer to:
https://brainly.com/question/27176982?referrer=searchResults
#SPJ1
What additional kind of energy makes Cv larger for a diatomic gas than for a monatomic one?
O Charismatic energy
O Translational energy
O Heat energy
O Rotational energy
O Solar energy
Answer:
translational energy
Explanation:
because is diatomic
Electricity travels in closed circuits, and its normal route is through a conductor. Electric shock occurs when:
Electric shock occurs when a person comes into contact with a current flowing through an electrical circuit.
What do you mean by "electric shock"?
Electric shock occurs when a person comes into contact with a current flowing through an electrical circuit. This can happen when the person comes into contact with a live conductor, such as a wire carrying an electrical current, or when the person becomes part of the circuit, such as by touching both a live wire and a ground.
Electric shock can cause a range of symptoms depending on the severity and duration of the exposure, including muscle contractions, burns, internal injuries, and in severe cases, cardiac arrest or death. Electric shocks can also cause electrical burns which can be serious.
When a person comes into contact with a current, it can cause an electric shock, which can range in severity from a mild tingling sensation to severe injury or death. Factors that determine the severity of an electric shock include the amount of current flowing through the body, the duration of contact with the current, and the path the current takes through the body.
It is important to note that Electric shock can be prevented by following safety guidelines and by using proper safety equipment when working with electrical equipment and circuits.
Hence, Electric shock occurs when a person comes into contact with a current flowing through an electrical circuit.
To learn more about electric shock from the given link:
https://brainly.com/question/14980202
#SPJ4
You are on roller blades on top of a small hill. Your potential energy is equal to 1000 joules. The last time you checked your mass was 60.0 kilograms. What is the height of the hill
The height of the hill can be calculated using the formula PE = mgh, where m is the mass, g is the acceleration due to gravity (9.8 m/s2), and h is the height of the hill. So, solving for h, we get h = PE/mg = 1000 J/ (60.0 kg*9.8 m/s2) = 10.2 m.
Therefore, the height of the hill is 10.2 m. The potential energy of an object is the energy it possesses due to its position or state. As the object moves, its potential energy can be converted into kinetic energy, or the energy it has due to its motion. In this case, the rollerblader is on top of the hill, so it has potential energy due to the height of the hill.
The formula for potential energy is PE = mgh, which means that the potential energy is equal to the mass multiplied by the acceleration due to gravity multiplied by the height. In this case, the mass is known to be 60.0 kg, and the potential energy is known to be 1000 J. By using the formula and substituting in the known values, the height of the hill can be calculated.
The height of the hill is determined to be 10.2 m, which is relatively small. This means that the hill is not too steep, and the rollerblader would not have to use a lot of energy to go down it.
To know more about potential energy refer to the link brainly.com/question/24284560
#SPJ4
2. An airboat with mass 3.50 x 102 kg, including the passenger, has an engine that produces a net horizontal force of 7.70 x 102 N, after accounting for forces resistance. a. Find the acceleration of the airboat b. Starting from rest, how long does it take the airboat to reach a speed of 12.0 m/s2
The acceleration of the airboat which has a mass of 350 kg is 2.2 m/s²
The time the airboat takes to reach the speed of 12 m/s is 5.45 seconds
The mass of the airboat = 350 kg
The net horizontal force of the airboat = 770 N
The acceleration of the airboat can be found using the formula,
F = ma
where F is the force
m is the mass
a is the acceleration
Let us rearrange the above equation, we get
a = F/m
Let us substitute the known values in the above equation, we get
a = 770 / 350
= 2.2 m/s²
The time taken to reach the speed of 12 m/s is
a = v/t
where a is the acceleration
v is the velocity
t is the time taken
Let us rearrange the equation, we get
t = v/a
Let us substitute the known values in the above equation, we get
t = 12 / 2.2
= 5.45 seconds
Learn more about the force in
https://brainly.com/question/15321240
#SPJ4
Why does acceleration increase down a ramp?
Acceleration increase down a ramp, due to an object is free to move under the influence of gravity. That's why acceleration increases.
Acceleration is a measure of how quickly an object's velocity changes. On a ramp, an object is free to move under the influence of gravity. The gravitational force acting on an object is always directed downward, and the force of friction acting on an object is directed upward. The force acting on an object moving down a ramp is the force of gravity minus the force of friction. Since the force of gravity is greater than the force of friction, the net force acting on the object is directed downward, which causes the object to accelerate downward. The angle of the ramp affects the force of friction, as the greater the angle of the ramp, the greater the force of friction, and the less the net force acting on the object and less acceleration. Therefore, acceleration increases down a ramp because the net force acting on an object is directed downward and the angle of the ramp affects the force of friction.
To know more about acceleration please refer: https://brainly.com/question/12550364
#SPJ4
he cars mass was only 111 kg. Suppose two of these cars are used in a stunt crash for an action film. If one car's initial velocity is 9.00 m/s to the right and the other car's velocity is 5.00 m/s to the left, how much kinetic energy is discinated in the crash
In the crash 5883 Joule kinetic energy is discinated when two of these cars are used in a stunt crash for an action film.
How do you use start kinetic energy to calculate end kinetic energy?Final kinetic energy (KE) is equal to 1/2 m1v'12 + 1/2 m2v'22 , or joules. The end kinetic energy for common things will be lower than the starting point. The only way you can increase kinetic energy is if the impact causes an energy release of some type.
How can total kinetic energy be calculated?As a result, the kinetic energy equation states that it is equal to 1/2 the object's mass times the magnitude of its velocity squared, or speed squared.
Initial kinetic energy KE,
[tex]KE=1/2 m_1v_1^2 + 1/2 m_2v_2^2[/tex]
[tex]KE=1/2 (111)(9.00)^2 + 1/2 (111)(5.00)^2[/tex]
[tex]KE= 4495.5+1387.5[/tex]
[tex]KE= 5883J[/tex]
To know more about kinetic energy visit:
https://brainly.com/question/25959744
#SPJ4
Calculate the rotational inertia of 27 kg solid cylinder whose diameter is 0. 24 m about an axis of the cylinder if I= mr^2. Where I is the rotational inertia, m is mass and r is the radius
The value of moment of Inertia of the solid cylinder will be 0.19 kg/m^2
Any item that can be rotated has the property of rotational inertia. It is a scalar value that indicates how challenging it is to alter an object's rotational velocity around a certain rotational axis. The role of mass in linear mechanics is analogous to that of rotational inertia in rotational mechanics.
The formula I = 1/2 [M (R_2^2 + R_1^2)] may be used to calculate the moment of inertia of a hollow cylinder revolving along an axis passing through the centre of the cylinder. The cylinder in this instance will have a mass of M and internal and exterior radii R1 and R2, respectively.
The cylinder's moment of inertia about its axis is (MR^2)/2.
Where, M - mass of object, R = radius of the cylinder.
After putting all the values. we will get,
[tex]=\frac{27 \mathrm{~kg} \cdot(0.24 \mathrm{~m} / 2)^2}{2} \approx 0.19 \mathrm{~kg} \cdot \mathrm{m}^2[/tex]
For more such questions on moment of Inertia of the solid cylinder
https://brainly.com/question/27380063
#SPJ4
If you pound a feather with a hammer, which one feels a greater force? a. always the hammer both feather moves, then it felt the greater force. b. therwise the force the same on both. c. always the feather d. The size of the force is always exactly the same on both of them.
If you pound a feather with a hammer, which one feels a greater force always the hammer both feather moves, then it felt the greater force.
What is the force?
Force is an influence that produces a change in the motion of an object. It is measured in units of mass times acceleration, or newtons (N). Force is a vector quantity, meaning it has both magnitude and direction. Force can cause an object to accelerate, decelerate, remain in motion, change direction, or alter shape. Examples of forces include gravity, friction, tension, and magnetism. Forces can also be generated by electrical, thermal, and nuclear energy. All forces are generated by the interaction of two objects and can be balanced or unbalanced. Unbalanced forces will cause an object to move or accelerate and balanced forces will cause an object to remain stationary or in motion at a constant speed.
To learn more about force
https://brainly.com/question/12785175
#SPJ4
1. What is the
momentum of a 1.5 × 103-kilogram car
as it travels at 30. meters per second due east for 60.
seconds?
A) 4.5 x 104 kg m/s, east
B) 4.5 x 104 kg.m/s, west
C) 4.5 x 106 kg•m, east
D) 4.5 x 106 kg•m, west
A 1.5 x 103 kg car's momentum is equal to 4.5 x 104 kg m/s east if it moves at a speed of 30 m/s for 60 seconds while traveling straight east.
What is momentum ?Momentum is a property of an object or system that describes its tendency to move or stay in motion. It is equal to the product of the mass of the object and its velocity. Momentum is conserved, meaning that the total momentum of an isolated system remains constant, regardless of any changes or interactions within the system. Momentum is an important concept in classical mechanics, and is directly related to forces, energy, and angular momentum. Momentum is an essential factor for describing the behavior of objects in motion.
To learn more momentum
https://brainly.com/question/1042017
#SPJ1
The amplitude of pulse A is 20 cm and that of pulse B is 10 Cm what is the minimum amplitude of the resultant pulse
The minimum amplitude of the resultant pulse is 10 cm.
What is amplitude of a pulse?The amplitude of a pulse is the maximum height of the waveform measured from the baseline, also known as the peak-to-peak amplitude. In the case of two pulses, A and B, the minimum amplitude of the resultant pulse is determined by the vector sum of the individual amplitudes of the two pulses.
When two pulses are in phase, the resultant pulse amplitude is the sum of the individual amplitudes, which in this case is 20 cm + 10 cm = 30 cm.
However, if the two pulses are out of phase, the minimum amplitude of the resultant pulse is determined by the difference between the amplitudes of the two pulses. In this case, the minimum amplitude of the resultant pulse would be |20 cm - 10 cm| = 10 cm.
So, the minimum amplitude of the resultant pulse is 10 cm.
Learn more about minimum amplitude in brainly.com/question/26033167
#SPJ1
What is the torque on the lever?
The torque of a lever is equal to the perpendicular force multiplied by the length of the lever arm, which is the distance from the fulcrum of the lever.
Where can I find torque?The formula for torque is rF=rFsin(r). Torque is, in other words, the cross product of the distance vector (the distance between the pivot point and the point at which force is applied) and the force vector, where the angle 'a' between r and F is.
What is torque, and what is its SI unit?The SI unit for torque is the Newton-metre, or kgm2sec-2. Taking into account the formula Torque = Force X Distance While distance and force are measured in meters and newtons, respectively, torque is measured in newton-meters.
To know more about torque visit:-
https://brainly.com/question/6855614
#SPJ4
A long string is stretched and its left end is oscillated upward and downward. Two points on the string are labeled A and B. Points A and B are indicated on the string. Orient the two vectors, vA-> and vB-> to correctly represent the direction of the wave velocity at points A and B. rotate the given vectors to indicate the direction of the wave velocity at the indicated points. (Please draw a picture of the end result)
A lengthy string is simple to stretch. The string's two designated spots, A and B, should be at an angle of 90 degrees with the same magnitude, and B should be at an angle of 270 degrees with the same magnitude.
Angle magnitude definition
This is referred to as the amount of rotation that is believed to have been applied to one of the arms' vertex in order to produce a specific position for the other.
It is well known that equal vectors have the same magnitude and direction. When the magnitude and direction of two vectors are the same, they are said to be equal.
|v|=a2+b2 yields the magnitude. Depending on the application, the direction is equal to the angle made with the x-axis or the y-axis.
To learn more about Angle magnitude from given link
https://brainly.com/question/26132809
#SPJ4
the force exerted on the rope by the ceiling is in the _____ direction.
The force exerted on the rope by the ceiling is in the vertical direction. This means that the force is pushing straight down on the rope and is perpendicular to the plane of the ceiling.
The force exerted on the rope by the ceiling is the result of the gravity of the rope itself and the weight of any objects or materials that are attached to the rope.
In order for the force to remain in the vertical direction, the rope must be secured at the top of the ceiling and not allowed to move in any other direction. If the rope were to move in any other direction, the force exerted on the rope by the ceiling would no longer be in the vertical direction and the rope would no longer remain secure.
Learn more about force:
https://brainly.com/question/25239010
#SPJ4