a(n)____occurs when an attacker attempts to gain entry or disrupt the normal operations of an information system, almost always with the intent to do harm.

It is evident from the IP addresses that computer 1 is connected to network 192.168.1.0/24 and computer 2 is connected to network 10.1.1.0/24, but it is unclear whether these networks are directly connected.

Protocol for Dynamic Host Setup An IP network device that has been automatically configured using the Dynamic Host Configuration Protocol (DHCP), a network management protocol, can access network services including DNS, NTP, and any protocol based on UDP or TCP.

Press Enter after entering the command ipconfig/ lushdns. Your device's DNS configurations are updated as a result.

To know more about IP addresses visit:-

https://brainly.com/question/16011753

#SPJ1

If Iwina's media streaming device supports a transmission speed of up to 200 Mbps, I would recommend a wireless router that supports at least 802.11n wireless standard.

802.11n is a wireless networking standard that operates on both the 2.4 GHz and 5 GHz frequency bands. It offers higher speeds and greater range compared to earlier wireless standards, and is commonly used in home and small business networks.

Thus, if Iwina's media streaming device supports a transmission speed of up to 200 Mbps, I would recommend a wireless router that supports at least 802.11n wireless standard. This wireless standard supports a theoretical maximum speed of up to 600 Mbps, which should provide enough bandwidth to support Iwina's device. Alternatively, a router that supports the newer 802.11ac wireless standard could also be considered, as it offers even higher theoretical speeds.

Learn more about wireless router on:

https://brainly.com/question/30079964

#SPJ1

The method computes the employee's wage, stores it in the wage array, and returns it. The fixed wage is the amount of money each employee is paid per day, and the per item wage is the amount of money each employee is paid per item sold.

To receive full credit, the solution must call the computebonusthreshold appropriately.

public void compute wages(double fixed wage, double peritemwage) {

for (int i = 0; i < wages.length; i++) {

wages[i] = fixedwage + peritemwage * itemssold[i];

if (itemssold[i] >= computebonusthreshold()) {

wages[i] += bonus;

}

}}}

The above code performs the following operations: The wages array is declared in the method's signature, and the values are updated using a loop from 0 to the length of the wages array. The current value of wages is calculated by adding fixed wage to peritem wage times the current value of items sold. The wage of the employee is calculated using this formula. Finally, if the current value of items sold is greater than or equal to the computebonusthreshold, the value of wages is increased by bonus. The method computes the employee's wage, stores it in the wage array, and returns it. The fixed wage is the amount of money each employee is paid per day, and the per item wage is the amount of money each employee is paid per item sold.

Learn more about wage array visit:

https://brainly.com/question/16405929

#SPJ11

Say list1 is a MyArrayList and list2 is a MyLinkedList. Each of them has one million double values. Compared to code fragment B, code fragment A is more effective.

To learn more about ArrayList, refer to:

https://brainly.com/question/29754193

The situation that indicates that virtualization would provide the best ROI is when most physical servers within the organization are currently underutilized. The correct option is b.

Learn more about virtualization here: https://brainly.com/question/23372768

#SPJ11

The following definition accurately defines a threat: A set of circumstances that has the potential to cause loss or harm. so c is correct option.

A threat is defined as a potential event, circumstance, or action that could compromise the security of a computer system, network, or other digital devices. A threat might be either deliberate or unintentional. The different types of threats are as follows:

Malware: Malware is a malicious code or program designed to harm your computer system. It might include viruses, trojans, spyware, worms, or any other type of malicious software.

Phishing: Phishing is a type of social engineering attack that aims to steal your sensitive information, such as usernames, passwords, and credit card information.

Denial-of-service (DoS): A DoS attack aims to bring down a network or website by flooding it with an overwhelming number of requests. This renders the site inaccessible to legitimate users.

Advanced Persistent Threat (APT): An APT is a long-term, targeted attack aimed at obtaining valuable information. It involves an attacker infiltrating a system and remaining undetected while gathering data.

Password attacks: Password attacks are techniques used to gain unauthorized access to systems or networks. It might include dictionary attacks, brute force attacks, or any other type of attack on passwords.

so c is correct option.

To know more about Threat: https://brainly.com/question/14681400

#SPJ11

The option that refers to creating small programs based on the Linux commands that you want to routinely (or occasionally) execute is B) Scripting.

A script is a set of instructions that a computer can execute without human interaction. These directions are in a high-level programming language and may be executed by a computer after being translated. They're frequently saved in files and known as shell scripts or batch files in a variety of operating systems. A script can be thought of as a sequence of instructions that the computer must execute in order. It could be simple or complex, based on the user's needs. It's all up to the user's needs.

Linux scripting, in addition to command line execution, is based on the user's knowledge of shell commands, which they can use to script simple commands to perform repetitive tasks. There are several other scripting languages available, each with its own set of features and benefits.

Learn more about  Linux commands: https://brainly.com/question/30389482

#SPJ11

When an organization seeks transference of information security risk, it is likely to purchase (F) cyber liability insurance.

Cyber liability insurance helps organizations protect against financial losses from cybersecurity incidents such as data breaches, network damage, and cyber extortion. The insurance policy covers the cost of legal fees, customer notification, credit monitoring, data recovery, and any other costs associated with the breach. By purchasing cyber liability insurance, the organization transfers the financial risk of a cybersecurity incident to the insurance company, reducing its own financial liability.

You can learn more about Cyber liability insurance at

https://brainly.com/question/28524123

#SPJ11

The mobile operating system that is known for the ability to personalize preferences is (A )Android.

Android allows users to customize many aspects of their device, including the home screen, lock screen, widgets, and notification settings. Users can also choose from a wide variety of third-party apps and launchers to further customize their device. The ability to personalize preferences is one of the key features of Android and has contributed to its popularity among users who value customization and flexibility in their mobile devices.

Thus, option A is the correct answer.

You can learn more about mobile operating system at

https://brainly.com/question/29914371

#SPJ11

To sort the deck of cards by suit and by value, we can use the quick sort algorithm. Here's an example implementation:

python

class Deck:

   def __init__(self):

       self.cards = []

       self.suits = ['Clubs', 'Diamonds', 'Hearts', 'Spades']

       self.values = ['Ace', '2', '3', '4', '5', '6', '7', '8', '9', '10', 'Jack', 'Queen', 'King']

       for suit in self.suits:

           for value in self.values:

               self.cards.append(value + ' of ' + suit)

       self.is_sorted = False

       self.index_dict = {}

What is the code  about?

To make the search method a constant time lookup, we can use a hash table to store the location of each card in the deck. We can create the hash table when the deck is created or sorted, and then use it to look up the location of a card in constant time.

Therefore, To make the search a constant time lookup, we can use a dictionary where the keys are the card descriptions (e.g. "Ace of Spades") and the values are the array indices of the cards in the sorted deck.

Learn more about code  from

https://brainly.com/question/26134656

#SPJ1

The code fragment will show: gems = ["ruby," "sapphire," "garnet"] in the CSS copy code. ["emerald," "opal"], gems ["ruby," "sapphire," and "garnet"], print(gems[2])\sgarnet.

The following could be the solution: Given that "gems -" is intended to be an assignment statement that creates a list of strings called "gems" and that the second line is a separate statement that generates lists of strings called "opal" and "emerald," respectively:

"ruby", "sapphire", and "garnet" are the scss gems.

["emerald," "opal"]

gems ["ruby," "sapphire," and "garnet"]

print(gems[2])\sgarnet

As a result, the code fragment will show:

gems = ["ruby," "sapphire," "garnet"] in the CSS copy code

["emerald," "opal"]

gems ["ruby," "sapphire," and "garnet"]

print(gems[2])\sgarnet

Notice that "DISPLAY gems 2" is not a legitimate Python expression, thus I inferred that the goal was to print the third entry of the "gems" list using the indexing notation, which is "garnet".

Learn more about  "gems " here:

https://brainly.com/question/28268973

#SPJ4

The code provided in the question intends to fill an array of length 10 with these Hemachandra numbers, then print the value of the number in the array at the index entered by the user. However, there are several errors in the code that prevent it from working correctly.

Hemachandra numbers, more commonly known as Fibonacci numbers, are a sequence of numbers that are found by starting with two numbers and then finding the next number by adding the previous two numbers together. The most common starting numbers are 0 and 1, giving the numbers 0, 1, 1, 2, 3, 5, and so on. [1]

Firstly, there is a syntax error in the first line of the main method. The code "int[h] = new int[10];" should be "int[] h = new int[10];".

Secondly, the indices of the array are off by one. Arrays in Java are zero-indexed, meaning that the first element is at index 0 and the last element is at index 9. The code tries to access index 10, which is out of bounds and will result in an ArrayIndexOutOfBoundsException. Therefore, the last two lines should be changed to "h[8] = h[6] + h[7];" and "h[9] = h[7] + h[8];".

Finally, there is a syntax error in the last line of the code. The code "System. Out. Println(h(i));" should be "System.out.println(h[i]);".

Here is the corrected code:

import java.util.Scanner;

public class U6_L1_Activity_Two{

   public static void main(String[] args){

       int[] h = new int[10];

       h[0] = 0;

       h[1] = 1;

       h[2] = h[0] + h[1];

       h[3] = h[1] + h[2];

       h[4] = h[2] + h[3];

       h[5] = h[3] + h[4];

       h[6] = h[4] + h[5];

       h[7] = h[5] + h[6];

       h[8] = h[6] + h[7];

       h[9] = h[7] + h[8];

       Scanner scan = new Scanner(System.in);

       int i = scan.nextInt();

       if (i >= 0 && i < 10)

           System.out.println(h[i]);

   }

}

Now, if the user inputs 3, the program will output 2, while if the user inputs 6, the program will output 8

Find out more about Hemachandra numbers

brainly.com/question/30653510

#SPJ4

In accordance with "caso 1," an egg doesn't have the same value as a jar of jora chicha. In Wari culture, the egg was a symbol of wealth and status, and the jar of jora chicha was a ceremonial drink of great cultural and religious significance.

The incident described in the context of Wari culture is referred to as "caso 1". A group of people are faced with a choice of whether to trade a cra de oveja (sheep) for a jarrón de chicha de jora (jar of fermented corn beer). In the Wari society, where the exchange of items was based on symbolic and cultural meaning rather than solely utilitarian or economic value, this scenario exemplifies cultural values and conventions. The first scenario demonstrates how exchanging things was a difficult procedure that was influenced by social hierarchies, cultural values, and the social significance of objects.

Learn more about  "caso 1," here:

https://brainly.com/question/27822819

#SPJ4

The function filter_indices() takes in a list of integer values as its parameter some_list.

The function should find the index locations of the values that are <= 10 and return a list of integers containing the indices.

Here is an example implementation:
def filter_indices(some_list):
 indices = []
 for i in range(len(some_list)):
   if some_list[i] <= 10:
     indices.append(i)
 return indices
Examples:

Learn more about return visit:

https://brainly.com/question/16818841

#SPJ11

The Cisco command that displays information about the devices connected to routers is the command:

`show cdp neighbors`.

The output of this command provides information that includes device ID, local interface, hold time, capability, platform, and port ID. The Cisco command to display information about the devices connected to routers is `show cdp neighbors`. This command shows you all of the directly attached CDP neighbors. The command lists the neighbouring device's hostname or IP address, interface ID, and platform, as well as the time that the neighbor device has been alive. When you enter the `show cdp neighbors` command, you will get an output of all directly connected routers or switches that have CDP enabled on their interfaces.

Cisco Discovery Protocol (CDP) is a proprietary protocol that Cisco Systems devices use to exchange information about other directly attached Cisco equipment. CDP information is always transmitted as broadcast on the link, allowing neighbors to become aware of one another. CDP can provide useful information to network administrators about other devices that are linked to their network, including the name of the device and its interface ID. CDP may also be used to validate Cisco hardware and software versions on directly connected devices.

Learn more about routers here: https://brainly.com/question/28180161

#SPJ11

the following code cout << x << ' ' << y << endl; added to end with a newline.

The complete code is as follows type a statement using srand() to seed random number generation using variable seedval. Then type two statements using rand() to print two random integers between (and including) 0 and 9. end with a newline :
#include <iostream>
#include <cstdlib>


using namespace std;

int main() {
   // Seed with the current time
   srand(time(NULL));

   // Seed the random number generation using variable seedval
   int seedval = 42;
   srand(seedval);

   // Print two random integers between 0 and 9
   int x = rand() % 10;
   int y = rand() % 10;

   cout << x << ' ' << y << endl;
   
   return 0;
}

The following statement is used to seed the random number generation using variable seedval:
srand(seedval);

The rand() function is used to print two random integers between 0 and 9 using the following statements:
int x = rand() % 10;
int y = rand() % 10;

These statements generate two random integers and store them in the x and y variables, respectively. Finally, to end with a newline, add the following code:
cout << x << ' ' << y << endl;

Learn more about  newline here: https://brainly.com/question/30557468

#SPJ11

A colored border, with a cross in the upper left-hand corner, appears around a cell where changes are made in a shared worksheet . (Option

A shared worksheet is a Microsoft Excel file that can be accessed and edited by multiple users simultaneously.

Thus, the border is an indication that the cell has been changed, and the cross in the upper left-hand corner represents the user who made the change. Other users who are currently viewing the shared worksheet will see the colored border and cross to indicate that changes have been made. This feature helps to facilitate collaboration and prevent conflicting changes in shared worksheets.

Learn more about Shared Worksheet:
https://brainly.com/question/14970055
#SPJ1

An ISP is a business that offers clients access to the Internet. Dial-up, DSL, cable, fibre optic, and wireless Internet connections are just a few of the options they provide.

A business that offers both consumers and companies access to the internet is known as an internet service provider (ISP). Moreover, ISPs might offer services like email, domain registration, web hosting, and browsers.

The Internet is a vast worldwide network that connects computers all over the world. From any location with an Internet connection, people may communicate and exchange information online.

To know more about Internet visit:-

https://brainly.com/question/27581708

#SPJ1

Answer:

Yes, Zenmap can detect which operating systems are present on IP servers and workstations. Zenmap has a built-in OS detection feature that allows it to identify the operating system running on a remote target.

Answer:

Explanation:

Un sistema de control de acceso es un sistema electrónico que restringe o permite el acceso de un usuario a un área específica validando la identificación por medio de diferentes tipos de lectura (clave por teclado, tags de próximidad o biometría) y a su vez controlando el recurso (puerta, torniquete o talanquera) por medio de un dispositivo eléctrico como un electroimán, cantonera, pestillo o motor.

Cut-Through switching is a switching technique that makes advantage of the CRC (Cyclic Redundancy Check) value in a frame. Using a technique known as cut-through switching.

With a network switch's switching method, traffic is forwarded from one network segment to another. Cut-Through switching, Store-and-Forward switching, and Fragment-Free switching are the three switching techniques most frequently employed in contemporary computer networks. Cut-Through switching is the quickest way, however because there is no error checking before forwarding, there may be more errors sent on. Switching between stores and forwards is longer but offers more complete error detection because the full frame is checked before being forwarded. Fragment-Free switching, a hybrid technique, checks only the first 64 bytes of a frame before forwarding it in an effort to strike a balance between speed and error checking. The right switching technique should be chosen based on the network's speed, dependability, and mistake tolerance.

Learn more about "switching method" here:

https://brainly.com/question/30300938

#SPJ4

The changing numeric code that is required in addition to the username and passw-ord when authenticating to a cloud account is known as a (b) Time-based One-Time Password (TOTP).

TOTP is a form of two-factor authentication (2FA) that relies on a time-based algorithm to generate a unique, one-time code that changes every 30 seconds. The code is typically generated by a smartphone app, such as Go-ogle Authenticator or Microsoft Authenticator.

The user must enter the current TOTP code in addition to their username and pass-word to access the account. This provides an extra layer of security, as even if an attacker were to obtain the username and pass-word, they would also need access to the smartphone app generating the TOTP code to gain access to the account.

Thus, the correct answer is option B.

You can learn more about cloud computing at

https://brainly.com/question/26972068

#SPJ11

In the question, a description of "malware," a class of harmful software, is given.

Malicious software, also known as "malware," is any programme intended to damage, interfere with, or gain unauthorised access to a computer or network. Malware can appear as viruses, worms, trojan horses, spyware, ransomware, and adware, among other things. Infected email attachments, downloaded files, and malicious websites are just a few ways that malware can spread. Malware can do a variety of things once it's installed, like deleting or stealing files, changing system settings, or spying on user activities. Use antivirus software, maintain your software up to date, stay away from downloading from dubious sources, and adopt safe online browsing practises to protect yourself from infection.

Learn more about "malicious software" here:

https://brainly.com/question/30470237

#SPJ4

The Oracle Cloud Infrastructure (OCI), Object Storage tier that can be used to store backup data that should be available immediately when needed but is not supposed to be accessed frequently, while also reducing storage costs is the Infrequent Access Tier. The correct answer d.

Learn more about data  here: https://brainly.com/question/179886

#SPJ11

Due to the fact that digital devices only capture partial sound waves rather than entire waves, digital information requires far less storage space than analogue information.

All data that is transferred or stored in a binary format, which consists of 0s and 1s, is referred to as digital information. Digital text, photos, music, and video are all included. Digital information has the major benefit of being easily copied, exchanged, and sent across vast distances with little to no quality degradation. Also, it is simple to store and access from digital devices like computers and smartphones. A vital component of contemporary communication, entertainment, and technology, digital information is also very adaptable and may be altered in a variety of ways, such as editing, compression, and encryption.

Learn more about digital information here:

https://brainly.com/question/28345294

#SPJ4

The given statement "because the user accesses files on cloud storage through a browser using an app from the storage provider, the actual media on which the files are stored are transparent to the user." is true because cloud storage typically provides a user-friendly interface for accessing files stored on remote servers. The user can access these files through a web browser or through an app provided by the storage provider.

The actual media on which the files are stored (such as hard drives or solid-state drives) are not visible or accessible to the user. Instead, the user interacts with the files through the software interface provided by the cloud storage provider. This abstraction layer provides a level of convenience and ease-of-use for the user, while allowing the storage provider to manage the underlying hardware and infrastructure as needed.

You can learn more about cloud storage at

https://brainly.com/question/13092608

#SPJ11

No, it is untrue that 2D arrays are declared in row-column order, where the first value represents the number of rows and the second value represents the number of columns.

In programming, a 2D array is a type of data structure that is used to hold and modify groups of values that are arranged in a grid or table-like style. Because it has two dimensions—rows and columns—it is known as a 2D array. The position of each element in the array within the grid, which is determined by a pair of indices—one for the row and one for the column—is used to identify it. Several programming activities, including image processing, matrix operations, and game development, frequently use 2D arrays. They are especially helpful for displaying information that can be arranged into a grid or table, such as the locations of game boards or the pixels in an image.

Learn more about 2D arrays here:

https://brainly.com/question/27171171

#SPJ4

In addition to their traditional motor-program selection/implementation functions, the basal ganglia are also thought to be involved with cognitive processes.

The basal ganglia, often known as the basal nuclei, are a group of subcortical nuclei that are essential for motor control, reinforcement learning, and cognitive control in the brain (Executive Functions). They are situated at the base of the forebrain in the human brain. They are involved in a variety of brain processes, including motor control, cognitive control, and reward learning.

The basal ganglia have four primary functions, which are to:

Contribute to the regulation of motor activities. These nuclei are mostly responsible for facilitating and/or inhibiting the activities of the muscle groups via thalamocortical pathways.

Contribute to the regulation of autonomic activities, such as sweating, pupil dilation, and blood pressure.Changing the behavioral outcomes of emotional situations through associative learning.Modulating the execution of thoughts through decision-making mechanisms.

In conclusion, cognitive processes are among the various activities that the basal ganglia participate in, in addition to their traditional motor-program selection/implementation functions.

Learn more about bangsal ganglia at

https://brainly.com/question/4109433

#SPJ11

There are several strategies that Lakeisha could use to speed up her data processing, such as parallel processing, data compression, and data aggregation.

These strategies can be used to reduce the amount of data that needs to be processed, speed up the processing of each individual data point, and allow multiple data points to be processed simultaneously.

Additionally, she could use a more powerful computer or use cloud-based computing to speed up her program.Lakeisha is developing a program to process data from smart sensors installed in factories.

The thousands of sensors produce millions of data points each day. When she ran her program on her computer, it took 10 hours to complete.

Learn more about data processing at

https://brainly.com/question/30094947

#SPJ11

The effect of the following command chage -m 60 -w 10 jsmith is: It sets the password for user jsmith to expire after 60 days and gives a warning 10 days before expiration.

The chage command in Linux is used to change the user's password expiry information. The -m option sets the minimum number of days required between password changes, and the -w option sets the number of days in advance a user will be warned before their password expires. In this case, the command chage -m 60 -w 10 jsmith sets the minimum password age to 60 days and the warning period to 10 days for the user jsmith. This means that jsmith will not be allowed to change their password before 60 days have passed since the last password change, and will receive a warning 10 days before the password expires.

Learn more about password visit:

https://brainly.com/question/28114889

#SPJ11