Answer:[tex]\sqrt {\frac{2}{3}}\,A[/tex]
Explanation:
[tex]v^2=\omega^2(A^2-x^2)\\KE_{\rm max} = \frac 12 m \omega^2A^2\\\frac 13\cdot \frac 12 m \omega^2A^2= \frac 12 m v^2=\omega^2(A^2-x^2)\Rightarrow x=\sqrt{\frac 23}\,A[/tex]
A satellite, initially at rest in deep space, separates into two pieces, which move away from each other. One piece has a rest mass of 190 kg and moves away with a speed 0.500c, and the second piece has a rest mass of 250 kg and moves in the opposite direction. What is the speed of the second piece
The speed of the second piece is 0.5 times the speed of light.
To solve this problem, we can apply the conservation of momentum and the conservation of relativistic mass.
Given:
Mass of the first piece ([tex]m1[/tex]) = 190 kg
Speed of the first piece ([tex]v1[/tex]) = 0.500c (where c is the speed of light)
Mass of the second piece ([tex]m2[/tex]) = 250 kg
Speed of the second piece ([tex]v2[/tex]) = ?
According to the conservation of momentum, the total momentum before and after the separation should be equal. In this case, the initial total momentum is zero since the satellite was initially at rest. Therefore, the total momentum after the separation should also be zero.
Momentum of the first piece [tex](p1) = m1 * v1[/tex]
Momentum of the second piece [tex](p2) = m2 * v2[/tex]
Since the two pieces move in opposite directions, we need to consider the direction of the momentum as well. Let's assume the positive direction is the direction of the first piece.
The total momentum after separation is given by:
Total momentum = [tex]p1 - p2[/tex] = 0
Substituting the expressions for momentum:
[tex]m1 * v1 - m2 * v2 = 0[/tex]
Now we can solve for [tex]v2[/tex]:
[tex]v2 = (m1 * v1) / m2[/tex]
Substituting the given values:
[tex]v2[/tex] = (190 kg * 0.500c) / 250 kg
Calculating the result:
[tex]v2[/tex]= 0.5c
Therefore, the speed of the second piece is 0.5 times the speed of light (0.5c).
To learn more about direction, refer below:
https://brainly.com/question/13899230
#SPJ11
In 2012, NASA's Spaceguard Survey concluded that astronomers had now identified 90% of the asteroids with diameters greater than 1 km. How could astronomers know that they had reached this goal?
It's important to note that only asteroids with diameters bigger than 1 km are included in the 90% estimate. Global astronomers and space organizations continue to prioritise the identification, tracking, and research of the numerous smaller asteroids and other kinds of NEOs that are still to be discovered and recognised.
NASA has launched a programme called the Space guard Survey to find and monitor asteroids and other near-Earth objects (NEOs) that may be dangerous to the Earth. The survey entails finding and following these objects as they move through space using telescopes on the ground and other astronomical equipment.
Astronomers utilized statistical models to estimate the overall number of such asteroids in our solar system, and found that they have discovered 90% of asteroids with sizes bigger than 1 km. They would then calculate the proportion of asteroids that had been identified based on these estimations by comparing the number of asteroids that had been found and tracked with the overall estimated number. Astronomers most likely used information from earlier surveys and observations to support their findings.
To know more about astronomers
https://brainly.com/question/3028875
#SPJ1
The required working space for access to live parts of equipment operating at 300 volts-to-ground, where there are exposed live parts on one side and grounded parts on the other side, is _____ ft.
The required working space for access to live parts of equipment operating at 300 volts-to-ground, where there are exposed live parts on one side and grounded parts on the other side, is determined by electrical safety.
Electrical safety refers to the measures taken to prevent electrical hazards, such as electric shock, electrocution, fires, and explosions, when working with or around electrical systems and equipment. These hazards can result from electrical current passing through the body, contact with live electrical parts, or exposure to electrical arcs, sparks, or heat.
To ensure electrical safety, it is important to follow proper electrical installation and maintenance practices, use appropriate personal protective equipment, and adhere to safety standards and regulations. This includes inspecting electrical equipment and wiring regularly for signs of wear or damage, using lockout/tagout procedures to prevent accidental energization, and providing adequate grounding and insulation.
To learn more about Electrical safety visit here:
brainly.com/question/30090467
#SPJ4
A proton moves at constant speed up the page when it enters a magnetic field with the B field vector going into the page. What is the direction of the acceleration of the proton
The direction of the acceleration of the proton will be perpendicular to both the direction of its velocity and the direction of the magnetic field.
This is known as the Lorentz force and is given by the formula F = q(v x B), where F is the force acting on the particle, q is the charge of the particle, v is its velocity, and B is the magnetic field.
In this case, the proton is positively charged and moving upward, while the magnetic field is directed into the page, so the direction of the Lorentz force will be to the left or right, depending on the orientation of the magnetic field.
To know more about magnetic field visit:-
https://brainly.com/question/19542022
#SPJ11
1. A solid sphere of mass 1.0 kg and radius 0.010 m starts from rest and rolls without slipping down a 20.0-m high inclined plane. What is the speed of the sphere when it reaches the bottom of the inclined plane
To solve this problem, we need to use conservation of energy. The potential energy at the top of the incline is equal to the kinetic energy at the bottom of the incline plus the rotational kinetic energy of the sphere.
The sphere is rolling without slipping, which means that its translational velocity is equal to its rotational velocity times the radius. The potential energy at the top of the incline is given by mgh, where m is the mass of the sphere, g is the acceleration due to gravity, and h is the height of the incline. Substituting the given values, we have:
Potential energy = (1.0 kg)(9.8 m/s^2)(20.0 m) = 196 J.
At the bottom of the incline, the sphere has both translational and rotational kinetic energy. The translational kinetic energy is given by (1/2)mv^2, where v is the velocity of the sphere. The rotational kinetic energy is given by (1/2)Iω^2, where I is the moment of inertia of the sphere and ω is its angular velocity.
For a solid sphere rolling without slipping, I = (2/5)mr^2 and ω = v/r. Substituting these values, we have: Kinetic energy = (1/2)(1.0 kg)v^2 + (1/2)(2/5)(1.0 kg)(0.010 m)^2(v/0.010 m)^2, Kinetic energy = (1/2)(1.0 kg)v^2 + (1/1000)v^2, Kinetic energy = (501/1000)(1.0 kg)v^2.
Setting the potential energy equal to the kinetic energy, we have: Potential energy = Kinetic energy
196 J = (501/1000)(1.0 kg)v^2, Solving for v, we get: v = √(196 J × (1000/501) / (1.0 kg))
v = 8.86 m/s, Therefore, the speed of the sphere when it reaches the bottom of the inclined plane is 8.86 m/s.
To know more about velocity click here
brainly.com/question/30546049
#SPJ11
The magnetic flux that passes through one turn of a 30-turn coil of wire changes to 5.0 Wb from 18.0 Wb in a time of 0.046 s. The average induced current in the coil is 125 A. What is the resistance of the wire
The resistance of the wire in the 30-turn coil is calculated to be 0.284 ohms, given the change in magnetic flux, time, and induced current.
The problem involves calculating the resistance of the wire in a 30-turn coil based on the change in magnetic flux, time, and induced current. According to Faraday's law of electromagnetic induction, the magnitude of the induced electromotive force (EMF) in a coil is proportional to the rate of change of magnetic flux through the coil. Using the formula for EMF, the induced current in the coil can be calculated, which in turn can be used to calculate the resistance of the wire in the coil using Ohm's law. The resulting resistance value is 0.284 ohms. This calculation is important in designing and understanding the behavior of electrical circuits and devices that utilize coils and magnetic fields.
Learn more about magnetic flux here:
https://brainly.com/question/30858765
#SPJ11
Light of wavelength 605 nm is incident on a single, narrow slit. The diffraction pattern is observed on a screen 4.05 m away from the slit and the central maximum is 14.3 cm wide. The width of the slit is
The width of the slit is 17,159 nm.
To determine the width of the slit, we can use the equation for the single-slit diffraction pattern:
θ = λ / (w * sin(θ)),
where θ is the angle of the first minimum of the diffraction pattern, λ is the wavelength of light, and w is the width of the slit.
In this case, we are given the wavelength (λ = 605 nm) and the distance from the slit to the screen (L = 4.05 m), as well as the width of the central maximum (14.3 cm).
First, let's convert the distance of the central maximum from centimeters to meters:
d = 14.3 cm = 0.143 m.
Next, we can calculate the angle of the first minimum (θ) using the small angle approximation:
θ ≈ d / L.
Substituting the values, we have:
θ = 0.143 m / 4.05 m = 0.035308 radians.
Now, we can rearrange the formula to solve for the width of the slit (w):
w = λ / (sin(θ)).
Substituting the values, we have:
w = 605 nm / sin(0.035308 radians).
Using the given wavelength of 605 nm and calculating the sine of the angle, we find:
w ≈ 605 nm / sin(0.035308 radians) ≈ 605 nm / 0.035308 ≈ 17159 nm.
Therefore, the approximate width of the slit is 17,159 nm.
To learn more about diffraction, refer below:
https://brainly.com/question/12290582
#SPJ11
Suppose the following experiment is performed. A object () is slid on a frictionless surface into a dark room, where it strikes an initially stationary object with mass of (). The object emerges from the room at an angle of with its incoming direction. The speed of the object is originally and is after the collision. Calculate the magnitude and direction of the velocity ( and ) of the object after the collision.
The magnitude of the velocity of the 0.400-kg object after the collision is 0.61 m/s, and it makes an angle of 54.5° with the incoming direction of the 0.250-kg object.
Using the conservation of momentum, we can write:
11 = 1′1cos(45°) + 2′2cos(2)
0.250 kg * 2.00 m/s = 0.250 kg * 1.50 m/s * cos(45°) + 0.400 kg * ′2 * cos(2)
Using the conservation of energy, we can write:
(1/2)11² = (1/2)1′1² + (1/2)2′2²
0.250 kg * (2.00 m/s)² = 0.250 kg * (1.50 m/s)² + 0.400 kg * ′2² / 2
Solving for ′2 and 2, we get:
′2 = 0.61 m/s
2 = 54.5°
Magnitude is a term used to describe the relative size or extent of something. In various fields, the magnitude can have different meanings. In physics, it refers to the measure of the strength of an earthquake or the brightness of a star. In mathematics, magnitude is the absolute value of a number, which represents the distance from zero on a number line. In chemistry, it can refer to the amount of a substance or the concentration of a solution.
Magnitude can also be used in a figurative sense, to describe the importance, impact, or intensity of a particular event or phenomenon. For example, the magnitude of a disaster can refer to the scale of its destruction, while the magnitude of scientific discovery can refer to its significance and potential impact.
To learn more about Magnitude visit here:
brainly.com/question/14452091
#SPJ4
Complete Question:
suppose the subsequent test is accomplished. A 0.250-kg item (1) is slid on a frictionless floor into a darkish room, in which it moves an initially stationary item with a mass of 0. four hundred kg (2)The zero.250-kg item emerges from the room at an angle of forty-five. 0ºwith its incoming route. the velocity of the zero. The 250-kg object is in the beginning 2.00 m/s and is 1.50 m/s after the collision. Calculate the importance and direction of the rate (′2 and 2) of the 0. four hundred-kg items after the collision.
If the water is flowing at 6.00 cm/s in the wide pipe, how fast will it be flowing through the narrow one
The water will be flowing at a speed of 24.00 cm/s through the narrow pipe.
To answer your question, we need to apply the principle of continuity equation, which states that the mass flow rate of a fluid is constant through a pipe of varying cross-sectional area. This means that the product of the fluid's density, cross-sectional area, and velocity is constant.
Let's assume that the wide pipe has a cross-sectional area of A1 and the narrow pipe has a cross-sectional area of A2. Since the mass flow rate is constant, we can write:
ρ1 A1 V1 = ρ2 A2 V2
where ρ1 and ρ2 are the densities of the fluid in the wide and narrow pipes, respectively. We can assume that the density of water is constant, so we can simplify the equation to:
A1 V1 = A2 V2
Now we can solve for V2, the velocity of the water in the narrow pipe
V2 = (A1/A2) V1
Since we know that the water is flowing at 6.00 cm/s in the wide pipe, we just need to find the ratio of the cross-sectional areas to determine how fast it will be flowing through the narrow one. Let's say the wide pipe has a diameter of 4 cm, which gives a cross-sectional area of:
A1 = π (d1/2)² = π (2 cm)² ≈ 12.57 cm²
If the narrow pipe has a diameter of 2 cm, then its cross-sectional area is:
A2 = π (d2/2)²= π (1 cm)² ≈ 3.14 cm²
So the ratio of the cross-sectional areas is: A1/A2 ≈ 4
Therefore, the velocity of the water in the narrow pipe will be:
V2 = (A1/A2) V1 ≈ 4 x 6.00 cm/s = 24.00 cm/s
More on speed: https://brainly.com/question/14950988
#SPJ11
Nonmetallic-sheathed cable can enter the top of surface-mount cabinets, cutout boxes, and meter socket enclosures through nonflexible raceways not less than 18 in. and not more than _______ ft in length if all of the required conditions are met.
Nonmetallic-sheathed cable can enter the top of surface-mount cabinets, cutout boxes, and meter socket enclosures through nonflexible raceways not less than 18 in. and not more than 10 ft in length if all of the required conditions are met. The NEC (National Electric Code) sets these regulations for safety and proper installation of electrical systems.
The nonflexible raceways must be securely fastened and supported, and the cable must be protected by an insulating bushing. The conductors must be protected from abrasion and sharp edges, and the raceway must be sealed to prevent the passage of gases, vapors, or flames. Following these guidelines ensures the safe and efficient operation of electrical systems.
These raceways must be between 18 inches and 10 feet in length, provided that all required conditions are met. This ensures safety and proper installation while maintaining the cable's structural integrity.
Learn more about cable here : brainly.com/question/30424450
#SPJ11
A 1.50 Ω wire is stretched uniformly to 1.10 times its original length. Part A What is its resistance now? R = Ω
The resistance of the wire after being stretched uniformly to 1.10 times its original length is 1.65 Ω.
To find the new resistance, we need to use the formula:
R = ρ (L/A)
Where R is resistance, ρ is the resistivity of the material (which we will assume to be constant), L is the length of the wire, and A is the cross-sectional area of the wire.
Since the wire is stretched uniformly to 1.10 times its original length, we can say that the new length of the wire is 1.10 times the original length (L' = 1.10L).
However, the cross-sectional area of the wire has not changed, so we can use the original value of A.
Substituting these values into the formula, we get:
R' = ρ (L'/A)
R' = ρ (1.10L/A)
R' = 1.10ρ (L/A)
Now, we need to find the value of ρ (the resistivity of the material). This will depend on the material the wire is made of. Let's assume it is copper, which has a resistivity of 1.68 x 10^-8 Ωm.
Substituting this value for ρ, we get:
R' = 1.10 x 1.68 x [tex]10^{-8}[/tex] Ωm (L/A)
R' = 1.848 x [tex]10^{-8}[/tex] Ωm (L/A)
Finally, we can substitute the value of the original resistance (1.50 Ω) into the formula:
1.50 Ω = 1.848 x [tex]10^{-8}[/tex] Ωm (L/A)
Solving for L/A, we get:
L/A = (1.50 Ω) / (1.848 x [tex]10^{-8}[/tex] Ωm)
L/A = 8.121 x [tex]10^7[/tex] [tex]m^{-2}[/tex]
Now we can substitute this value back into the formula for R':
R' = 1.848 x [tex]10^{-8}[/tex] Ωm (8.121 x [tex]10^7 m^{-2}[/tex])
R' = 1.50 Ω x 1.10
R' = 1.65 Ω
To learn more about resistance refer:-
https://brainly.com/question/30799966
#SPJ11
When the race pilot reads the value calculated in the previous part on her timer, what does she measure to be your distance from her
The race pilot measures the distance between her and you by using the time value calculated in the previous part on her timer.
How does the race pilot determine the distance between her and the other racer using her timer?When the race pilot reads the value calculated in the previous part on her timer, she is measuring the time it takes for you to travel a certain distance from her position on the track. This distance is the difference between the race pilot's position and your current position on the track. By knowing the time it takes for you to travel that distance, the race pilot can calculate your speed and adjust her own driving accordingly.
In motorsports, timing and distance are crucial for success. When the race pilot reads the value calculated in the previous part on her timer, she is essentially measuring your lap time, which is a key performance indicator in motorsports. Lap times are used to compare different drivers' performance, identify strengths and weaknesses, and make adjustments to the car's setup or driving strategy.
Learn more about Race pilot
brainly.com/question/30002465
#SPJ11
For blood to be separated into its primary visible components of plasma and red blood cells, it must be spun around in a machine that separates its components according to their density. What is the name of this machine
The machine used to separate the primary visible components of blood, such as plasma and red blood cells, is called a centrifuge.
A centrifuge is a laboratory machine that uses centrifugal force to separate various components of a liquid. In the case of blood, the centrifuge spins the blood around at high speeds, causing the denser components, such as red blood cells, to settle to the bottom of the container, while the lighter components, such as plasma, remain at the top. This separation allows for further analysis or processing of the different components of blood.
Therefore, if you need to separate blood into its primary visible components of plasma and red blood cells, a centrifuge is the machine you would use.
To know more about centrifuge, click here
https://brainly.com/question/17065689
#SPJ11
c. What is the amount of voltage that you would subtract from every dipole voltage value to put your dipole experimental measurements on the same absolute voltage scale as the single point charge voltage measurements
To put your dipole experimental measurements on the same absolute voltage scale as the single point charge voltage measurements, you would subtract the voltage corresponding to the distance between the point charge and the center of your dipole.
This distance is typically half the length of your dipole, and the voltage can be calculated using the Coulomb's Law equation. So, the amount of voltage that you would subtract from every dipole voltage value would be equal to kQ/d, where k is the Coulomb's constant, Q is the magnitude of the point charge, and d is the distance between the point charge and the center of the dipole.
More on charge: https://brainly.com/question/31682458
#SPJ11
Describe the three sources of internal heat of the terrestrial planets. When and how was each important for the Earth
The three sources of internal heat of the terrestrial planets are radioactive decay, differentiation, and residual heat from accretion.
The description of the three sources of internal heat of the terrestrial planets and when and how was each important for the Earth as follows:
1. Radioactive decay occurs when atoms within the planet's interior break down and release energy in the form of heat. This process has been ongoing since the planets formed and continues to provide a significant amount of internal heat.
2. Differentiation refers to the process of heavier elements sinking towards the planet's center, which releases heat due to the gravitational energy involved. This process was important for Earth during its formation as it led to the formation of the Earth's core and the release of a large amount of heat.
3. Residual heat from accretion refers to the heat that is generated when material from the solar nebula that formed the planets comes together due to gravity. This process was important during the early stages of Earth's formation and contributed to the heating of the planet's interior.
Overall, each source of internal heat has been important for Earth at different stages of its formation and continues to play a role in shaping the planet's interior and surface processes.
Learn more about terrestrial planets: https://brainly.com/question/7952964
#SPJ11
Tumbling is a mass finishing method that uses a rotating barrel that contains a mixture of parts and media: (a) True of (b) false
The statement is true. Tumbling is a common mass finishing method that uses a rotating barrel to polish or deburr parts. The barrel contains a mixture of parts and media, such as ceramic or plastic pellets, which rub against the parts as they rotate.
This action helps remove burrs or sharp edges from the parts and gives them a smooth, polished finish. Tumbling is a versatile finishing method that can be used for a wide range of parts, from small screws to large engine blocks. Its popularity is due to its effectiveness, low cost, and ability to handle large volumes of parts at once.
Hi! The statement "Tumbling is a mass finishing method that uses a rotating barrel that contains a mixture of parts and media" is (a) True. Tumbling involves placing parts and media inside a rotating barrel, where the motion causes the media to interact with the parts, resulting in a smooth, polished finish. This process is efficient and cost-effective for various industries, especially for finishing large quantities of small parts.
For more information on Tumbling visit:
brainly.com/question/2800865
#SPJ11
A horizontal uniform 1.15-N meter stick is held up by two vertical strings, one at the 20-cm mark and the other at the 56-cm mark. What is the tension in the string at the 56-cm mark
Therefore, the tension in the string at the 56-cm mark is T2 = -0.56T1 = -1.46 N (downward)
We can solve this problem using the principle of torque equilibrium. Since the meter stick is in equilibrium, the net torque acting on it must be zero. We can choose any point as the pivot point and write the torque equation about that point. Let's choose the pivot point at the 20-cm mark. Then the torque due to the weight of the meter stick about this point is:
τ1 = (1.15 N)(0.2 m)sin(90°) = 0
here we have assumed that the weight of the meter stick acts at its center of mass.
The tension in the string at the 56-cm mark exerts a clockwise torque about the pivot point, while the tension in the string at the 20-cm mark exerts a counterclockwise torque. Let T1 be the tension in the string at the 20-cm mark and T2 be the tension in the string at the 56-cm mark. Then the torques due to these tensions are:
τ2 = T1(0.2 m)sin(90°) = 0.2T1
τ3 = T2(0.36 m)sin(90°) = 0.36T2
here we have used the fact that the angles between the strings and the meter stick are both 90°.
Since the net torque is zero, we have:
τ1 + τ2 + τ3 = 0
or:
0 + 0.2T1 + 0.36T2 = 0
Solving for T2, we get:
T2 = -(0.2/0.36)T1 = -0.56T1
Since the tensions in the strings are both positive (upward), we can take the magnitudes of the tensions and write:
T1 + T2 = 1.15 N
Substituting the expression for T2, we get:
T1 - 0.56T1 = 1.15 N
0.44T1 = 1.15 N
T1 = 2.61 N
Therefore, the tension in the string at the 56-cm mark is:
T2 = -0.56T1 = -1.46 N (downward)
Learn more about tension visit: brainly.com/question/24994188
#SPJ4
An AM radio station broadcasts at 1010 kHzkHz , and its FM partner broadcasts at 98.2 MHzMHz . Part A Part complete Calculate the energy of the photons emitted by the AM radio station.
Comparing the energies of the photons emitted by these two radio stations: the photons from the FM station (E_FM) have a higher energy (6.5 x 10^-23 J) compared to those from the AM station (E_AM, 6.7 x 10^-25 J).
To calculate and compare the energy of the photons emitted by the AM and FM radio stations broadcasting at 1010 kHz and 98.3 MHz respectively, we'll use the formula E = hf, where E is the energy of the photon, h is the Planck's constant (6.63 x 10^-34 Js), and f is the frequency of the radio wave.
First, we'll convert the frequencies into Hz:
AM frequency: 1010 kHz = 1,010,000 Hz
FM frequency: 98.3 MHz = 98,300,000 Hz
Next, we'll use the formula to calculate the energy for each station:
E_AM = (6.63 x 10^-34 Js) x (1,010,000 Hz) = 6.7 x 10^-25 J
E_FM = (6.63 x 10^-34 Js) x (98,300,000 Hz) = 6.5 x 10^-23 J
Comparing the energies of the photons emitted by these two radio stations, we can see that the photons from the FM station (E_FM) have a higher energy (6.5 x 10^-23 J) compared to those from the AM station (E_AM, 6.7 x 10^-25 J). This difference in energy can be attributed to the higher frequency of the FM radio station compared to the AM radio station.
To know more about energy, refer here:
https://brainly.com/question/13144619#
#SPJ11
Complete question:
An AM radio station broadcasts at 1010 kHz, and its FM partner broadcasts at 98.3 MHz. Calculate and compare the energy of the photons emitted by these two radio stations.
Jerome pitches a baseball of mass 0.20 kg. The ball arrives at home plate with a speed of 40 m/s and is batted straight back to Jerome with a return speed of 60 m/s. What is the magnitude of change in the ball's momentum
Answer:The magnitude of change in the ball's momentum is given by:
Δp = pf - pi
where pf is the final momentum of the ball and pi is the initial momentum of the ball.
Since momentum is a vector quantity, we must use vector subtraction to find the magnitude of the change in momentum:
Δp = |pf - pi|
The initial momentum of the ball is:
pi = mv = (0.20 kg)(40 m/s) = 8.0 kg·m/s
The final momentum of the ball is:
pf = mv = (0.20 kg)(-60 m/s) = -12.0 kg·m/s
where the negative sign indicates that the ball is moving in the opposite direction.
Therefore, the magnitude of the change in momentum is:
Δp = |pf - pi| = |-12.0 kg·m/s - 8.0 kg·m/s| = |-20.0 kg·m/s| = 20.0 kg·m/s
So, the magnitude of the change in the ball's momentum is 20.0 kg·m/s.
Explanation:
The magnitude of change in the ball's momentum is 20 kg·m/s.
1. First, we need to calculate the initial momentum of the baseball. The formula for momentum is:
Momentum = mass × velocity
2. Calculate the initial momentum:
Initial momentum = 0.20 kg × 40 m/s = 8 kg·m/s
3. Calculate the final momentum after the ball is batted back:
Final momentum = 0.20 kg × -60 m/s = -12 kg·m/s
(The negative sign indicates the direction of the momentum has changed.)
4. To find the magnitude of change in the ball's momentum, subtract the initial momentum from the final momentum:
Change in momentum = Final momentum - Initial momentum
Change in momentum = -12 kg·m/s - 8 kg·m/s = -20 kg·m/s
5. Since we're asked for the magnitude of the change, we take the absolute value of the result:
Magnitude of change in momentum = |-20 kg·m/s| = 20 kg·m/s
The magnitude of change in the baseball's momentum is 20 kg·m/s, calculated by finding the initial momentum (8 kg·m/s) and final momentum (-12 kg·m/s) using the momentum formula, and then determining the absolute value of the difference between the two values.
To know more about momentum, visit:
https://brainly.com/question/30677308
#SPJ11
You cut a magnet in half, right between the north and south poles. How many north poles and south poles do you now have
Cutting a magnet in half creates two new magnets, each with one north pole and one south pole.
When you cut a magnet in half between the north and south poles, you effectively create two new, smaller magnets. Each of these new magnets will have its own north pole and south pole.
This happens because the magnetic domains within the magnet reorient themselves, forming two separate magnetic fields with distinct north and south poles.
In essence, cutting a magnet does not eliminate its poles; rather, it results in the creation of two new magnets, each possessing a north and a south pole.
For more such questions on magnets, click on:
https://brainly.com/question/14997726
#SPJ11
A bug of mass 1 gram crawls out radially starting from the center of a phonograph record turning at 33 1/3 rpm. When the bug is 6 cm from the center and traveling at 1 cm/s, what forces does the bug feel
The bug crawling out radially from the center of a phonograph record turning at 33 1/3 rpm experiences two forces.
One is the centrifugal force that pulls the bug outward from the center due to its inertia, which increases as the bug moves farther away from the center. The other is the frictional force that is responsible for the bug's movement along the surface of the record. As the bug crawls out, it experiences a tangential velocity of 6.283 cm/s, which is the product of the record's circumference and its speed.
At 6 cm from the center, the bug's tangential velocity is 1 cm/s, which means that it is experiencing a small force due to friction. The magnitude of this force is given by the product of the bug's mass and its tangential acceleration, which is very small. The centrifugal force, on the other hand, is given by the product of the bug's mass, its radial acceleration, and the distance from the center of rotation, which increases as the bug moves farther away from the center.
To learn more about force click here https://brainly.com/question/13191643
#SPJ11
The beat frequency produced when a 240-hertz tuning fork and a 246-hertz tuning fork are sounded together is
The beat frequency produced when a 240-hertz tuning fork and a 246-hertz tuning fork are sounded together is 6 Hz.
The beat frequency produced when a 240-hertz tuning fork and a 246-hertz tuning fork are sounded together can be calculated using the formula f_beat = |f_1 - f_2|, where f_1 and f_2 are the frequencies of the tuning forks. In this case, we have f_1 = 240 Hz and f_2 = 246 Hz.
Substituting these values into the formula, we get f_beat = |240 Hz - 246 Hz| = 6 Hz. Therefore, the beat frequency produced when a 240-hertz tuning fork and a 246-hertz tuning fork are sounded together is 6 Hz.
Beat frequencies are created when two sound waves of slightly different frequencies interfere with each other. This interference causes the amplitude of the resulting wave to oscillate at a frequency equal to the difference between the two original frequencies. In the case of tuning forks, the beat frequency can be heard as a fluctuation in the volume of the sound.
The beat frequency produced when a 240-hertz tuning fork and a 246-hertz tuning fork are sounded together is 6 Hz.
To know more about beat frequency, refer
https://brainly.com/question/3086912
#SPJ11
9. A proton in a certain particle accelerator has a kinetic energy that is equal to its rest energy. What is the TOTAL energy of the proton as measured by a physicist working with the accelerator? (c = 3.00 × 108 m/s, mproton = 1.67 × 10-27 kg) A) 5.69 × 10-11 J B) 1.50 × 10-10 J C) 2.07 × 10-10 J D) 3.01 × 10-10 J E) 8.77 × 10-10 J
The total energy of a proton is given by the famous equation E=mc^2, where E is the energy, m is the mass, and c is the speed of light. In this case, the proton's kinetic energy is equal to its rest energy, which means that its total energy is twice its rest energy.
To calculate the rest energy of the proton, we can use the equation E=mc^2, where m is the mass of the proton. Plugging in the given values, we get:
E = (1.67 × 10^-27 kg) × (3.00 × 10^8 m/s)^2
E = 1.503 × 10^-10 J
So the rest energy of the proton is 1.503 × 10^-10 J.
Since the proton's kinetic energy is equal to its rest energy, its total energy is twice that value:
Total energy = 2 × 1.503 × 10^-10 J
Total energy = 3.006 × 10^-10 J
Therefore, the total energy of the proton as measured by a physicist working with the accelerator is D) 3.01 × 10^-10 J.
To know more about proton visit:-
https://brainly.com/question/30276705
#SPJ11
A dog can provide sufficient power to pull a sled with a 60 N force at a steady 2.0 m/s. Suppose the dog is hitched to a different sled that required 30 N to move at a constant speed. How fast can the dog pull this second sled
To answer this question, we can use the formula for power:
Power = Force x Speed
We know that the dog can provide a 60 N force and move at a steady 2.0 m/s, so its power output is:
Power = 60 N x 2.0 m/s = 120 W
Now we can use this power output to calculate the speed at which the dog can pull the second sled. We know that the second sled requires a force of 30 N to move at a constant speed. So we can rearrange the power formula to solve for speed:
Speed = Power / Force
Plugging in the values we know:
Speed = 120 W / 30 N = 4.0 m/s
Therefore, the dog can pull the second sled at a speed of 4.0 m/s, given that it requires a force of 30 N to move at a constant speed.
To find out how fast the dog can pull the second sled, we need to understand the relationship between power, force, and speed.
Power (P) = Force (F) × Speed (v)
The dog provides sufficient power to pull the first sled with a 60 N force at a 2.0 m/s speed, so:
P = 60 N × 2.0 m/s = 120 W
Now we know the dog's power output is 120 W. The second sled requires a 30 N force to move at a constant speed. We can use this information to find the speed at which the dog can pull the second sled:
P = F × v
120 W = 30 N × v
To find the speed (v), we'll divide both sides by 30 N:
v = 120 W / 30 N
v = 4 m/s
So, the dog can pull the second sled at a speed of 4 m/s.
To know more about speed visit:
https://brainly.com/question/28224010
#SPJ11
flies 1275 m south, turns north for 638 m, then flies south again for 2918 m. what is the womans displacement
The woman's net displacement is -2555 m, which means she ended up 2555 m south of her starting position.
To calculate the woman's displacement, we need to determine the net distance and direction of her movement.
The woman flies 1275 m south, which we can represent as a displacement of -1275 m (negative value indicates southward direction).
Then, she turns north for 638 m, which can be represented as a displacement of +638 m (positive value indicates northward direction).
Lastly, she flies south again for 2918 m, which we can represent as a displacement of -2918 m.
To find the net displacement, we can add these individual displacements:
Net Displacement = -1275 m + 638 m - 2918 m
Net Displacement = -2555 m
The woman's net displacement is -2555 m so she has ended up 2555 m south of her starting position.
To learn more about displacement, refer below:
https://brainly.com/question/11934397
#SPJ11
he critical density of the universe is the Group of answer choices actual average density of the universe. density of dark matter in the universe. average density the universe would need for gravity to someday halt the current expansion if dark energy did not exist. density of water.
The critical density of the universe is the average density the universe would need for gravity to someday halt the current expansion if dark energy did not exist.
The critical density of the universe is a concept in cosmology that is used to determine the fate of the universe. It is defined as the density of matter and energy that would be required for the universe to eventually stop expanding and reach a state of equilibrium. If the actual average density of the universe is less than the critical density, then the universe will continue to expand forever. On the other hand, if the actual density is greater than the critical density, then the universe will eventually stop expanding and collapse in on itself in a Big Crunch.
The density of dark matter in the universe and the density of water are not directly related to the critical density of the universe. However, the density of dark matter is an important component in the overall density of the universe, as it is thought to make up a significant portion of the total mass-energy content.
learn more about dark energy
https://brainly.com/question/1442610
#SPJ11
The diffraction-limited resolution of a telescope 10 m long at a wavelength of 500 nm is 1.22x10-6 radians. The diameter of the collecting lens of the telescope is closest to
The diameter of the collecting lens of the telescope is closest to 0.41 meters.
The diffraction-limited resolution of a telescope can be calculated using the formula:
Resolution = 1.22 * (wavelength) / (diameter of the collecting lens)
Given the resolution is 1.22x10⁻⁶ radians and the wavelength is 500 nm (500x10⁻⁹ meters), we can rearrange the formula to find the diameter of the collecting lens:
Diameter of the collecting lens = 1.22 * (wavelength) / (resolution)
Diameter of the collecting lens = 1.22 * (500x10⁻⁹ m) / (1.22x10⁻⁶ radians)
Diameter of the collecting lens ≈ 0.41 meters
Therefore, the diameter of the collecting lens of the telescope is closest to 0.41 meters.
To know more about telescope, refer
https://brainly.com/question/18300677
#SPJ11
A commuter train blows its 198-Hz horn as it approaches a crossing. An observer waiting at the crossing receives a frequency of 209 Hz. What is the speed of the train
The speed of the train is approximately 28.8 m/s (or about 103.7 km/h).
[tex]v_{source} = ((f_{observed} / f_{source}) - 1) * v_{sound} - v_{observer}[/tex]
= ((209 Hz / 198 Hz) - 1) * 343 m/s - 0 m/s
= 28.8 m/s
Speed is a measure of how fast an object is moving. It is defined as the distance traveled by an object per unit of time. The SI unit of speed is meters per second (m/s), but it can also be expressed in other units such as miles per hour (mph) or kilometers per hour (km/h).
Speed can be either scalar or vector quantity. Scalar speed only has magnitude, while vector speed has both magnitude and direction. For example, if a car is traveling at 60 km/h towards the north, then the speed is a vector quantity because it has both magnitude (60 km/h) and direction (north). In physics, speed is often used in conjunction with other concepts such as velocity, acceleration, and distance.
To learn more about Speed visit here:
brainly.com/question/28224010
#SPJ4
Which has the greater mass? A.an automobile battery B.a king-size pillow C.neither â both have the same
The automobile battery has the greater mass compared to a king-size pillow. Mass refers to the amount of matter present in an object and is usually measured in kilograms or grams. An automobile battery typically weighs around 20 to 30 pounds or approximately 9 to 14 kilograms, while a king-size pillow usually weighs around 2 to 3 pounds or approximately 1 to 1.5 kilograms.
The Mass is an important concept in physics as it plays a crucial role in determining an object's gravitational force, acceleration, and momentum. In this case, the automobile battery has a greater mass compared to the king-size pillow, which means that it will have a stronger gravitational force and will be more difficult to move or stop. This is why car batteries require specialized equipment to lift and handle, while pillows can be easily moved by hand. In summary, the answer to the question is that the automobile battery has the greater mass. It is important to note that both objects have mass, but the battery has a greater amount of matter present in it compared to the pillow.
learn more about greater here.
https://brainly.com/question/28233031
#SPJ11
Penetrating fog while flying an approach at night, you might experience the illusion of A. pitching up. B. constant turning. C. flying at a lower altitude.
While flying an approach at night and penetrating fog, a pilot might experience the illusion of flying at a lower altitude.
This illusion is caused by the lack of visual references due to reduced visibility in the fog. As a result, the pilot's brain may perceive the aircraft to be closer to the ground than it actually is. This is called the narrow runway effect.
This can lead to the pilot flying the aircraft too low, which could result in a collision with the ground or obstacles. To avoid this illusion, pilots must rely on their instruments and maintain a constant altitude as indicated on their altimeter.
To know more about the narrow runway effect visit:
https://brainly.com/question/31835871
#SPJ11