An object is dropped from rest from a height of 4.0 x 106 m above the surface of Earth. If there is no air resistance, what is its speed when it strikes Earth

When a football is kicked without rotating, it means that the kicker has kicked the ball in such a way that the center of mass remains stable and unchanged during its flight.

This happens when the kicker strikes the ball at its center or slightly below it. On the other hand, when a football tumbles end over end during its flight, it means that the kicker has struck the ball off-center, causing it to rotate around its center of mass. This rotation is caused by the imbalance of forces acting on the ball, which leads to a torque that causes it to spin. Therefore, the way a football is kicked determines whether it will sail through the air without rotating or tumble end over end.

To learn more about forces visit;

https://brainly.com/question/13191643

#SPJ11

The buoyant force acting on the block is approximately 80.91 Newtons (N).

To determine the buoyant force acting on the block, we need to consider Archimedes' principle, which states that the buoyant force experienced by an object immersed in a fluid is equal to the weight of the fluid displaced by the object.

The buoyant force (Fb) can be calculated using the formula:

Fb = ρ * V * g,

where ρ is the density of the fluid, V is the volume of the fluid displaced by the object, and g is the acceleration due to gravity.

In this case, the block is completely submerged in water, so the fluid is water with a density of approximately 1000 kg/m³.

To find the volume of the fluid displaced by the block, we can use the volume of the block itself, as the submerged portion of the block will displace an equivalent volume of water.

The volume (V) of the block is given by:

V = length * width * height.

Substituting the given dimensions, we have:

V = 0.105 m * 0.233 m * 0.329 m.

Calculating this, we find:

V ≈ 0.00824 m³.

Now, we can calculate the buoyant force:

Fb = 1000 kg/m³ * 0.00824 m³ * 9.8 m/s².

Evaluating this, we get:

Fb ≈ 80.91 N.

Therefore, the buoyant force acting on the block is about 80.91 Newtons (N).

To learn more about buoyant, refer below:

https://brainly.com/question/32138756

#SPJ11

In the United States we generate just about 20% of our electricity from nuclear power while France generates about 70% of their electricity from nuclear power.

Nuclear power plays a significant role in the U.S. energy mix, but it is not the predominant source. The country relies on a combination of various energy sources, including coal, natural gas, renewables, and nuclear power.

On the other hand, France stands out as a leader in nuclear power generation. They generate approximately 70% of their electricity from nuclear power.

France has heavily invested in nuclear energy and has developed a robust nuclear infrastructure over the years. This high reliance on nuclear power has been a deliberate policy choice driven by factors such as energy security, reducing greenhouse gas emissions, and minimizing dependence on imported fossil fuels.

The disparity in nuclear power generation between the United States and France can be attributed to a range of factors, including differing energy policies, public perceptions, regulatory frameworks, and access to alternative energy resources. Each country has made distinct choices in shaping their energy landscapes based on their unique circumstances and priorities.

To know more about electricity refer here:

https://brainly.com/question/15277088

#SPJ11

The transmission axis of the polarizing sheet makes an angle of 53.6 degrees horizontal.

To determine the angle that the transmission axis of the polarizing sheet makes with the horizontal, we can use the equation:

I = I_0 [tex]cos^{2}[/tex](theta)

Where I is the intensity of light emerging from the polarizing sheet, I_0 is the intensity of the horizontally polarized light incident on the sheet, and theta is the angle between the transmission axis and the horizontal.

Rearranging the equation to solve for theta, we get:

theta = arccos(sqrt(I/I_0))

Substituting the given values, we get:

theta = arccos(sqrt(0.602/0.937)) = 53.6 degrees

Therefore, the transmission axis of the polarizing sheet makes an angle of 53.6 degrees with the horizontal.

Polarizing sheets are commonly used in various applications, including sunglasses, 3D movies, and LCD screens. They work by allowing only certain orientations of light to pass through while blocking others. The angle at which the molecules are aligned determines the orientation of the transmitted light, and hence the angle of the transmission axis. Understanding the properties and behavior of polarizing sheets is important for many fields, including optics, photography, and physics.

know more about intensity of light here:

https://brainly.com/question/31380722

#SPJ11

A location's net ocean current motion is 90 degrees to the right of the location's predominant wind direction.

This is brought on by the Coriolis force, which causes moving objects in the Northern Hemisphere to be deflected to the right and in the Southern Hemisphere to the left. The Earth's rotation produces the Coriolis force, which deflects the direction of moving things like ocean currents. In the Northern Hemisphere, the deflection is to the right, while in the Southern Hemisphere, it is to the left. Because the wind propels the surface currents, which are subsequently deflected by the Coriolis force, the direction of net ocean current motion at a site is 90 degrees to the right of the direction of the prevailing wind. Large-scale ocean circulation patterns, including the Antarctic Circumpolar Current in the Southern Ocean and the Gulf Stream in the North Atlantic, are created as a result.

learn more about motion here:

https://brainly.com/question/22810476

#SPJ11

When looking for an area to land a medical helicopter at a motor vehicle collision scene, the best option would be a flat and clear area that is as close to the scene as possible, yet still allows for enough room for the helicopter to land safely. (Option)  flat and clear area that is as close to the scene as possible.

Ideally, the area should be free from obstructions such as power lines, trees, or other structures that could interfere with the landing.

Additionally, the landing zone should be well marked and easily accessible for emergency personnel to transport the injured individuals to the helicopter. It's also important to take into consideration the wind direction and speed, as well as any other potential hazards or obstacles in the surrounding area.

Medical refers to the practice of diagnosing, treating, and preventing illness, disease, and injury. It involves a range of professionals including doctors, nurses, and other healthcare providers working to improve the health and wellbeing of individuals and communities.

" You are on the scene of a motor vehicle collision and must look for an area to land a medical helicopter . Which option would be the best choice "

To learn more about medical helicopter refer here:

https://brainly.com/question/28767855#

#SPJ11

The spring constant is 500 N/m.

To find the spring constant, we can use the equation for elastic potential energy, which is:
E = (1/2)kx²

where E is the elastic potential energy, k is the spring constant, and x is the displacement (compression) of the spring. We can also use the equation for kinetic energy, which is:
K = (1/2)mv²

where K is the kinetic energy, m is the mass, and v is the initial velocity. When the ball is released, the elastic potential energy is converted into kinetic energy, so we can equate these two expressions:
(1/2)kx² = (1/2)mv²

Now, we can plug in the given values: m = 1 kg, x = 0.01 m (1 cm converted to meters), and v = 10 m/s:
(1/2)k(0.01)² = (1/2)(1)(10)²

Solve for k:
k(0.0001) = 50
k = 500 N/m

So, the spring constant is 500 N/m.

To know more about elastic potential energy :

https://brainly.com/question/30757592

#SPJ11

When a bug creates waves while swimming, the speed of the wave some distance away in front of the bug is slower compared to the speed of the wave created by a stationary bug. This is because the bug is swimming in the direction of the waves, adding its own speed to the speed of the waves, making them appear to be slower.

The bug is essentially catching up to its own waves, causing them to bunch up in front of it, resulting in a shorter wavelength and slower speed. This phenomenon is known as Doppler effect, where the apparent frequency and wavelength of waves change due to the motion of the source. Therefore, the speed of waves in front of the bug is slower, but the frequency remains the same, causing a change in wavelength.
Hi! When a bug that creates waves swims in the direction of the waves, the speed of the wave in front of the bug will be greater than the speed of the wave created by a stationary bug. This is because the moving bug adds its own speed to the waves it generates, causing them to travel faster in the direction the bug is moving. In contrast, waves created by a stationary bug only have the speed generated by the bug's movement in the water. To summarize, a swimming bug generates faster waves in front of it compared to a stationary bug.

For more information on  Doppler effect visit:

brainly.com/question/28106478

#SPJ11

The wavelengths of the two authorized microwave frequencies for microwave ovens are approximately 32.43 cm for 925 MHz and 11.86 cm for 2530 MHz

To calculate the wavelength (in cm) of the two microwave frequencies authorized for use in microwave ovens, 925 MHz and 2530 MHz, you can use the formula:
Wavelength (λ) = Speed of light (c) / Frequency (f)

The speed of light (c) is approximately 3 x 10⁸ meters per second (m/s). To convert this to centimeters per second (cm/s), multiply by 100:
c = 3 x 10⁸ m/s × 100 = 3 x 10¹⁰ cm/s

Now, let's calculate the wavelength for each frequency:
1. For 925 MHz:
First, convert the frequency to Hz: 925 MHz = 925 x 10⁶ Hz
Now, use the formula:
λ₁ = (3 x 10¹⁰ cm/s) / (925 x 10⁶ Hz) ≈ 32.43 cm

2. For 2530 MHz:
Convert the frequency to Hz: 2530 MHz = 2530 x 10⁶ Hz
Use the formula:
λ₂ = (3 x 10¹⁰ cm/s) / (2530 x 10⁶Hz) ≈ 11.86 cm

So, the wavelengths of the two authorized microwave frequencies for microwave ovens are approximately 32.43 cm for 925 MHz and 11.86 cm for 2530 MHz.

To know more about wavelength :

https://brainly.com/question/12377285

#SPJ11

The analysis involves calculating the velocity and impulse for both carts before and after the collision, assessing momentum and kinetic energy conservation, and comparing the results with and without extra weight on the carts.

The analysis involves calculating the velocities of the carts before and after the collision in each trial, as well as the impulse experienced by both carts. By comparing the impulse values, one can determine which cart experienced the greater force during the collision. The change in momentum can then be calculated using both the velocities and impulse, and the conservation of momentum can be assessed. If the kinetic energy is conserved, the sum of the kinetic energies of the carts before the collision should be equal to the sum of the kinetic energies after the collision. Finally, if the extra weight is placed on the red cart instead of the blue cart, this will change the velocities before and after the collision as well as the forces experienced by each cart.

Learn more about velocities here:

https://brainly.com/question/17127206

#SPJ11

The expression relating maximum stretch to mass on the spring is x=Fmax/k

The maximum stretch of a spring can be related to the mass on the spring using Hooke's Law, which states that the force exerted on a spring is proportional to the displacement of the spring.

The expression for this law is F=kx, where F is the force exerted on the spring, x is the displacement of the spring, and k is the spring constant. This expression can be rearranged to solve for x, giving x=F/k.

The maximum stretch of the spring can be measured as the displacement x when the force exerted on the spring is equal to its maximum value.

The mass on the spring is constant and does not affect the expression, as it only affects the force exerted on the spring, which is already accounted for in Hooke's Law..

To learn more about : mass

https://brainly.com/question/86444

#SPJ11

Answer:

Pinching the tube or closing the tube does not increase pressure. Here the applied pressure or available pressure in form static height is the source of total pressure. If you pinch the tube or close the tube, pressure in the tube will be equal to the applied pressure.

Explanation:

In the Bernoulli's Law procedures, if you pinch the outlet of the tube, the reading at the pressure gauge will increase.

Bernoulli's principle, or Bernoulli's law, states that as the speed of a fluid (liquid or gas) increases, its pressure decreases, and vice versa. It is commonly used to explain the lift of an airplane wing.

A pressure gauge is a device that measures the pressure of a gas or liquid. It typically consists of a gauge that displays the pressure reading and a mechanism that converts the pressure into a mechanical or electrical signal.

According to the given information:

If you pinch the outlet of the tube in Bernoulli's Law procedures, the reading at the pressure gauge will increase. This is because when you pinch the outlet, the cross-sectional area of the tube decreases, leading to an increase in the fluid velocity. According to Bernoulli's Law, an increase in fluid velocity corresponds to a decrease in pressure. As a result, the pressure at the pressure gauge will increase, indicating a higher pressure in the fluid system.
To know more about bernoulli principle visit:

https://brainly.com/question/11938008

#SPJ11

The maximum possible acceleration of the truck if the rope does not break is 0.51 m/s².

To find the maximum possible acceleration of the truck if the rope does not break, we can use the formula for the tension in the rope:

T = m₁a + m₂a

Where T is the tension in the rope, m₁ is the mass of the truck, m₂ is the mass of the car, and a is the acceleration of the truck.

We are given the mass of the car as 1442 kg and the maximum tension that the rope can withstand as 2306 N. We can rearrange the formula to solve for the maximum acceleration a:

a = (T - m₂a) / (m₁ + m₂)

Substituting the given values, we get:

a = (2306 N - 1442 kg × a) / (m₁ + 1442 kg)

Simplifying the equation, we get:

a = 0.51 m/s²

It is important to note that neglecting friction may not be a realistic assumption in some scenarios, and frictional forces should be considered if they are significant.

For such more questions on  Acceleration:

https://brainly.com/question/460763

#SPJ11

When a charged particle enters a uniform magnetic field at a nonzero angle, the resultant path of the charged particle will be curved.

This is because the magnetic field exerts a force on the charged particle that is perpendicular to both the direction of the magnetic field and the velocity of the charged particle. This force causes the charged particle to move in a circular or helical path, depending on the initial angle of entry and the strength of the magnetic field. The magnitude of the force depends on the charge of the particle, its velocity, and the strength of the magnetic field. The direction of the force is determined by the right-hand rule, where the direction of the force is perpendicular to both the magnetic field and the velocity of the charged particle.

To learn more about magnetic field click here https://brainly.com/question/23096032

#SPJ11

When passing a large truck, return to the right lane when you can see d. the truck in the right outside mirror.

When passing a large truck, it is important to return to the right lane when you can see the front of the truck in your rearview mirror. This ensures that you have enough space between your vehicle and the truck and that you are not in the truck's blind spot. Additionally, it is important to not linger in the left lane after passing the truck, as this can cause congestion and increase the risk of accidents. Always remember to signal before changing lanes and to maintain a safe and consistent speed while passing.

Learn more about rearview mirror here:

https://brainly.com/question/30207022

#SPJ11

Answer:The change in momentum of the football can be calculated using the equation:

Δp = mΔv

where Δp is the change in momentum, m is the mass of the football, and Δv is the change in velocity.

Δv = 24 m/s (since the football was initially at rest)

Δp = (0.46 kg)(24 m/s) = 11.04 kg⋅m/s

The average force exerted by the ball on the kicker's foot can be calculated using the equation:

F = Δp/Δt

where F is the force, Δp is the change in momentum, and Δt is the time of contact.

Δt = 0.039 s

F = 11.04 kg⋅m/s / 0.039 s = 283.6 N

Therefore, the magnitude of the force exerted by the ball on the kicker's foot is 283.6 N.

Explanation:

When a kicker imparts a speed of 24 m/s to a football initially at rest, having a mass of 0.46 kg and the time of contact with the ball is 0.039 s. Then the magnitude of the force exerted by the ball on the kicker's foot is 283.08N

What is the relation between force and mass?

The relation between force and mass is given by the formula:

F = m*a

where F is the force, m is the mass of the football, and a is the acceleration of the football.

We can find the acceleration by using the equation

a = (final velocity - initial velocity)/time of contact

Given that the initial velocity is 0 m/s, the final velocity is 24 m/s, and the time of contact is 0.039 s, we can find the acceleration:

a = (24 m/s - 0 m/s) / 0.039 s = 615.38 m/s^2

Now we can find the force:

F = m*a = 0.46 kg * 615.38 m/s^2 = 283.08 N

Therefore, the magnitude of the force exerted by the ball on the kicker's foot is 283.08 N. It is important to note that the short time of contact resulted in a high acceleration and force.

To know more about Force visit:

https://brainly.com/question/13191643

#SPJ11

The electric force between the charges decreases to 1/16 of its original value.

When considering the force between two point charges, we can refer to Coulomb's Law, which states that the electric force (F) between two charges (q1 and q2) is directly proportional to the product of the charges and inversely proportional to the square of the distance (r) between them.

Mathematically, Coulomb's Law can be expressed as:

F = k * (q1 * q2) / r²

where k is Coulomb's constant (8.99 x[tex]10^{9}[/tex] N·m²/C²).

Initially, the charges are 3 cm apart, so r1 = 0.03 m.

Afterward, they are moved to a distance of 12 cm apart, so r2 = 0.12 m.

To find the new electric force (F2) between the charges, we can use the ratio of the initial force (F1) and the new force (F2), which is given by:

F1 / F2 = (r2²) / (r1²)

Since we know r1 and r2, we can calculate the ratio:

F1 / F2 = (0.12²) / (0.03²) = 16

This means that the new force (F2) is 1/16 times the initial force (F1). Therefore, when the distance between the two point charges increases from 3 cm to 12 cm, the electric force between them decreases to 1/16 of its original value.

know more about electric force here:

https://brainly.com/question/17164299

#SPJ11

The two actions of rapidly thrusting and withdrawing the iron core into the coil will temporarily change the brightness of the light bulb.

When an iron core is rapidly inserted into the coil, it increases the magnetic flux within the coil. According to Faraday's Law of Electromagnetic Induction, this change in magnetic flux induces an electromotive force (EMF) in the coil, which affects the current flowing through the circuit. When the iron core is rapidly withdrawn, the magnetic flux decreases, again inducing an EMF in the coil. This changing current causes the brightness of the light bulb to fluctuate temporarily.

Rapidly inserting and withdrawing an iron core into a coil connected to a light bulb and battery will cause temporary changes in the light bulb's brightness due to the induced electromotive force in the coil as a result of the changing magnetic flux.

To know more about Faraday's Law of Electromagnetic Induction, visit:

https://brainly.com/question/13369951

#SPJ11

The thrusting and withdrawal of an iron core into a coil will temporarily increase and then decrease the magnetic field in the coil.

What is Thrust?

Thrust is a force that pushes an object forward, typically in the opposite direction to the one in which gas or liquid is being expelled. It is commonly associated with engines, such as those used in aircraft, rockets, and ships, where the expulsion of gases or liquids creates a reaction force that propels the vehicle or object in the opposite direction.

The iron core enhances the magnetic field by increasing the magnetic flux in the coil. When the core is withdrawn, the magnetic field collapses due to the induced electromotive force in the coil.

The thrusting and withdrawal of the iron core is a demonstration of electromagnetic induction, which is the basis of many electrical devices, including generators and transformers.

Learn more about Thrust from the given link

https://brainly.com/question/28807314

#SPJ4

The angle between the resultant force and the smaller force is approximately 46.1 degrees.

To solve this problem, we will use the Law of Cosines, which states that in any triangle, c^2 = a^2 + b^2 - 2ab*cos(C), where a, b, and c are the sides of the triangle, and C is the angle opposite side c.
In this case, the sides of the triangle are the two forces and the resultant force: a = 55 pounds, b = 97 pounds, and c = 113 pounds. We need to find the angle C between the resultant force and the smaller force (side a).
1. Substitute the given values into the Law of Cosines formula: 113^2 = 55^2 + 97^2 - 2*55*97*cos(C).
2. Calculate the values: 12769 = 3025 + 9409 - 10670*cos(C).
3. Subtract the constants: 335 = 10670*cos(C).
4. Divide by 10670: cos(C) = 335/10670 ≈ 0.0314.
5. Find the inverse cosine: C ≈ acos(0.0314) ≈ 46.1 degrees.

So, the angle between the resultant force and the smaller force is approximately 46.1 degrees.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ11

When the current I1 in loop 1 is increasing, an induced current is generated in loop 2 according to Faraday's law of electromagnetic induction. The direction of the induced current in loop 2 can be determined using Lenz's law,

which states that the induced current flows in a direction that opposes the change in the magnetic field that produced it.

In this case, the increasing current I1 in loop 1 produces a magnetic field around the loop, which passes through loop 2. To oppose this change in the magnetic field passing through loop 2, an induced current is generated in loop 2 that produces a magnetic field that opposes the magnetic field produced by loop 1.

Using the right-hand rule for electromagnetic induction, we can determine that the induced current in loop 2 will flow in the opposite direction to the current in loop 1. Therefore, the correct answer is:

B. The opposite direction as I1.

Learn more about   current    here:

https://brainly.com/question/13076734

#SPJ11

The type of remote sensing you are describing is called active remote sensing.

In active remote sensing, the sensor emits energy in the form of electromagnetic radiation or sound waves and then detects and measures the energy that is reflected or scattered back from the target. This is different from passive remote sensing, where the sensor only detects energy that is naturally emitted or reflected by the target, such as sunlight or thermal radiation. Examples of active remote sensing include radar and lidar, which use radio waves and laser light, respectively, to measure the properties of the target.

Learn more about remote sensing here:

https://brainly.com/question/10839378

#SPJ11

Borglie wavelength  of :

(a) we get λ = h/p = 6.63 x 10^-34 J s / 4.01 x 10^-22 kg m/s = 1.66 x 10^-10 m.

(b)we get λ = h/p = 6.63 x 10^-34 J s / 155 kg m/s = 4.28 x 10^-36 m,

The de Broglie wavelength is a concept that relates the momentum of a particle to its wavelength, according to the equation λ = h/p, where λ is the wavelength, h is Planck's constant, and p is the momentum of the particle.

a) For a He atom traveling at 1000 m/s, we can calculate its momentum by multiplying its mass (4.0026 u) by its velocity (1000 m/s), which gives us a momentum of 4.01 x 10^-22 kg m/s. Plugging this value into the de Broglie wavelength equation,

b) For a person jogging at 8 km/h (2.22 m/s), we can estimate their mass to be around 70 kg. Multiplying their mass by their velocity gives us a momentum of 155 kg m/s.

Plugging this value into the de Broglie wavelength equation,  which is incredibly small compared to the size of a human.

In conclusion, the de Broglie wavelength is a useful concept for understanding the wave-particle duality of matter, and it can be calculated for both atomic particles and macroscopic objects like people.

To learn more about : Borglie wavelength

https://brainly.com/question/28093301

#SPJ11

Max = 300 MPa is the maximum in-plane shear stress.  The typical normal stress is equal to 302.5 MPa ((x + y) / 2).  The highest in-plane shear stress is oriented 45 degrees away from the x-axis.

The major stress 1 is oriented 16.7 degrees away from the x-axis.

a) To determine the primary stresses, the quadratic equation 2 - (x + y) + (x y - 2) = 0 must be solved. We obtain the values 1 = 602.5 MPa and 2 = 2.5 MPa by plugging in the supplied values.

b) The equation max = (1 - 2) / 2 = 300 MPa can be used to calculate the maximum in-plane shear stress.

c) The average normal stress is simply (x + y) / 2 = 302.5 MPa, which is the average of x and y.

d) The equation p = 0.5 atan(2xy / (x - y)) can be used to determine the direction of the maximum in-plane shear stress. Using the values provided as plug-ins, we obtain p = 45 degrees from the x-axis.

e) The equation 1 = 0.5 atan(2xy / (x - y - 1 + 1)) can be used to determine the orientation of the major stress 1. Using the supplied data as a plug-in, we obtain 1 = 16.7 degrees from the x-axis.

learn more about shear stress here:

https://brainly.com/question/30328948

#SPJ11

The length of the pendulum for one hour will now measure approximately 1.000671 times its original length or a 0.0671% increase.

T = 2π√(L/g)

L' = L + (0.01000)L

= 1.01000L

To find the new period of the pendulum, we can substitute L' into the equation for the period:

T' = 2π√(L'/g)

= 2π√((1.01000L)/g)

To find the length of the pendulum for one hour (i.e., one hour is equivalent to T' seconds), we can solve for L':

T' = 3600 seconds

2π√((1.01000L)/g) = 3600

√((1.01000L)/g) = 3600/(2π)

(1.01000L)/g = (3600/(2π))²

L = g(3600/(2π))²/1.01000

L ≈ 1.000671L

A pendulum is a weight suspended from a fixed point so that it can swing freely back and forth under the influence of gravity. The motion of a pendulum is periodic, meaning it repeats itself over and over again at regular intervals.

The time it takes for a pendulum to complete one full swing, known as its period, is determined by its length and acceleration due to gravity. Longer pendulums have longer periods, while shorter pendulums have shorter periods. Pendulums also exhibit a phenomenon called resonance, where they can be set into motion by a force that has the same frequency as the pendulum's natural frequency of oscillation.

To learn more about Pendulum visit here:

brainly.com/question/29702798

#SPJ4

The energy of each photon is determined by its frequency, with higher frequencies corresponding to higher energies.

The red beam has a longer wavelength and lower frequency than the green beam, which has a shorter wavelength and higher frequency. Since both beams have the same intensity, this means that the rate at which energy is being delivered by each beam is the same.

However, each photon in the green beam has more energy than each photon in the red beam, since the energy of a photon is proportional to its frequency.

The energy of a photon can be calculated using the formula:

E = hf

where E is the energy of the photon, h is Planck's constant, and f is the frequency of the photon.

Therefore, since the green beam has a higher frequency than the red beam, each photon in the green beam has more energy than each photon in the red beam.

Know more about frequency here:

https://brainly.com/question/5102661

#SPJ11

The concept that best explains why your hand hurts is inertia.

When you carry a heavy bag of groceries and accidentally bang your hand against a wall, the concept that best explains why your hand hurts is inertia.

Inertia is the tendency of an object to resist changes in its state of motion, which includes changes in speed and direction.

When your hand hits the wall, it suddenly stops moving while the rest of your body is still in motion, causing a force to be exerted on your hand.

This sudden change in motion results in a painful sensation in your hand.

While gravity and resistance may play a role in other physical scenarios, inertia is the most relevant concept to explain this specific situation.

For more such questions on inertia , click on:

https://brainly.com/question/1140505

#SPJ11

The correct option is D, The process that was added to our theory of planet formation to explain the surprising extrasolar planets is migration.

A planet is a celestial body that orbits around a star, is spherical in shape due to its own gravity, and has cleared its orbit of other debris. The eight planets in our solar system are Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune.

Planets are formed from the same gas and dust that surrounds a young star, called a protoplanetary disk. Over time, this material comes together due to gravitational attraction and forms into larger and larger bodies, eventually creating planets. Planets can have various features such as atmospheres, moons, and rings. They also have different characteristics such as size, composition, and temperature, which can affect their ability to support life.

To learn more about Planet visit here:

brainly.com/question/15268075

#SPJ4

If a smoldering hot object hits the ground at your feet, it may be called a meteorite.

A meteorite is a solid piece of debris from an object such as a comet, asteroid, or meteoroid that originates in outer space and survives its passage through the Earth's atmosphere to reach the surface of the planet. As the meteorite enters the Earth's atmosphere, it becomes superheated due to friction with the air, causing it to glow brightly and potentially smolder or burn. If the meteorite survives this journey and strikes the ground, it can still be hot and smoldering.

It is also possible that the object is a meteorite, which is a solid piece of debris from space that has survived its passage through Earth's atmosphere and impacted the ground. Determining whether an object is a meteor or a meteorite involves analyzing its physical and chemical characteristics.

Learn more about  friction here:

https://brainly.com/question/13000653

#SPJ11

A solid disk with a mass of 0.50 kg and a radius of 0.10 m is spinning at a rate of 20.0 radians per second. The rotational kinetic energy of the solid disk is 0.5 joules.

To find the rotational kinetic energy of the solid disk, we can use the formula:
Rotational kinetic energy = (1/2) x moment of inertia x angular velocity^2

First, we need to find the moment of inertia of the solid disk. The moment of inertia of a solid disk rotating around its center is given by:

I = (1/2) x m x r^2

where m is the mass of the disk and r is its radius.

Substituting the given values, we get:
I = (1/2) x 0.50 kg x (0.10 m)^2 = 0.0025 kg.m^2

Next, we can plug in this value and the given angular velocity into the formula for rotational kinetic energy:

Rotational kinetic energy = (1/2) x 0.0025 kg.m^2 x (20.0 radians/s)^2
= 0.5 J

Therefore, the rotational kinetic energy of the solid disk is 0.5 joules.

To  learn more about kinetic energy refer here:

https://brainly.com/question/999862#

#SPJ11