An NaCl solution is prepared by dissolving 50.0 g NaCl in 200.0 g ofwater at 25"C What is the vapor pressure of the solution if the vapor pressure of water at 25*C is 23.56 torr? 1.574 tonr 1.686 tOrr 20.41 torr 0.8744 torr 21.87 torr

Answers

Answer 1

The vapor pressure of the NaCl solution is approximately 21.87 torr.

To calculate the vapor pressure of the NaCl solution, we can use Raoult's law which states that the vapor pressure of the solvent above the solution is proportional to the mole fraction of the solvent in the solution.

The mole fraction of water in the solution can be calculated as:

X_water = moles of water / total moles

The moles of water can be calculated from the mass of water and its molar mass, and the moles of NaCl can be calculated from its mass and molar mass:

moles of water = mass of water / molar mass of water = 200.0 g / 18.015 g/mol = 11.098 mol

moles of NaCl = mass of NaCl / molar mass of NaCl = 50.0 g / 58.44 g/mol = 0.855 mol

The total moles of solute and solvent in the solution is the sum of the moles of NaCl and water:

total moles = moles of NaCl + moles of water = 0.855 mol + 11.098 mol = 11.953 mol

The mole fraction of water is then:

X_water = moles of water / total moles = 11.098 mol / 11.953 mol = 0.9292

The vapor pressure of the solution can be calculated using Raoult's law:

P_solution = X_water * P_water

where P_water is the vapor pressure of pure water at the given temperature. Substituting the given values, we get:

P_solution = 0.9292 * 23.56 torr = 21.87 torr

Therefore, the vapor pressure of the NaCl solution is approximately 21.87 torr.

Learn more about NaCl solution:

https://brainly.com/question/28123588

#SPJ4


Related Questions

A rigid container holds 22. 4 l of an ideal gas at stp. How many moles of gas need to be added to the container to make the pressure equal to 325 kpa?.

Answers

Avogadro's law states that 2.2075 moles must be added to the container in order to raise the pressure to 325 kPa.

What is meant by Avogadro's law?

The general number of atoms or molecules has a direct relationship to the volume occupied by a gas under constant temperature and pressure, according to Avogadro's law, a gas law.

Given that it links temperature, pressure, volume, and substance amount, it is closely related to the ideal gas equation.

V ∝ n,

The straight line graph of volume versus moles is a straight line passing through the origin which implies that zero moles of gas occupy zero volume.

As 1 atm = 101.325 kPa

325 kPa = 325/101.325 = 3.2075 atm, as at STP 1 atm =22.4 liter.

Applying Avogadro's law,

n₂ = 71.848 × 1/22.4 = 3.2075 moles .

To estimate moles to be added, we get

3.2075 - 1 = 2.2075 moles.

Therefore, to increase the pressure in the container to 325 kPa, 2.2075 moles of gas must be supplied.

To learn more about Avogadro's law refer to:

brainly.com/question/3491421

#SPJ4

What is CS2 called in chemistry?

Answers

The compound CS₂ is called carbon disulfide in chemistry.

With the chemical formula CS₂ and the structural formula S=C=S, carbon disulfide (commonly known as carbon disulfide) is a significant inorganic molecule in chemistry. It is a white liquid that serves as a component in the synthesis of organic compounds.

Several industries utilise carbon disulfide. Many compound like Rubber, viscose rayon, cellophane are made up of it.

The group of inorganic substances known as other non-metal sulfides includes CS₂. These are inorganic compounds with a sulfur atom in an oxidation state of 2, where the most massive atom linked to the oxygen is a member of the other non-metals group.

To know more about carbon disulfide, visit,

https://brainly.com/question/16157463

#SPJ4

Select all the characteristics that apply to an atomic orbital. Defined by the wave function (Psi). A region around the nucleus of an atom where the probability of finding an electron is high A shell in an atom containing the valance electrons Identified by a unique combination of four quantum numbers; identified by a unique combination of three quantum numbers Defined by the square o' the wave function

Answers

The correct option is (a), an area where there is a high chance of finding an electron is the nucleus of an atom.

Identified by a unique combination of four quantum numbers; identified by a unique combination of three quantum numbers. Defined by the wave function (Psi) or the square of the wave function (|Psi|²). An atomic orbital is a mathematical function that describes the probability of finding an electron at a particular location in an atom. The wave function (Psi) defines the shape of the orbital, and the square of the wave function (|Psi|²) gives the probability density of finding an electron at a particular location. The quantum numbers that identify an atomic orbital include the principal quantum number (n), the angular momentum quantum number (l), the magnetic quantum number (m), and the spin quantum number (s). The values of these quantum numbers determine the energy, shape, and orientation of the orbital. An atomic orbital does not refer to a shell in an atom containing the valence electrons, as a shell is a collection of orbitals with the same principal quantum number (n). Valence electrons are the outermost electrons in an atom and are located in the highest energy level, which may consist of one or more shells.

To know more about electron please refer: https://brainly.com/question/21306067

#SPJ4

When water freezes, it freezes the salt with it.


True

False

Answers

It is not true so it False

Answer: False

When salt water or any other liquid that has some type of particle in it, freezes the salt or particles sink to the top or bottom, depending on weather it is more dense than the liquid it is meaning B. False is our correct answer.

I hope this helps & Good Luck <3!!

is agno3 soluble in water

Answers

AgNO₃ is soluble in water .

Strong ionic bonds combine to generate a silver nitrate molecule. It indicates that the compound's two constituents, silver and nitrate, retain opposing charges and are drawn to one another.

Thus, nitrate is negatively charged whereas silver is positively charged. Because it possesses an additional ion, silver acquires a positive charge during the production of silver nitrate. In contrast, nitrate loses an ion.

Consequently, their charges are combined and balanced. Yet, the silver and nitrate separate when submerged in water. This explains why silver nitrate dissolves in water.

know more about soluble in water click here;

brainly.com/question/29857840

#SPJ4

What is the name for N2F4?

Answers

The chemical name for N2F4 is Dinitrogen tetrafluoride. It is also known as Tetrafluoro hydrazine.

Tetrafluoro hydrazine have the chemical formula N2F4. It is a colorless, reactive inorganic gas. It is also called as perfluoro hydrazine and is a fluorinated analog of hydrazine. This is a highly hazardous chemical that explodes in the presence of organic materials. Tetrafluoro hydrazine is manufactured from nitrogen trifluoride. It is manufactured by using an iron catalyst or iron(II) fluoride. It is used in chemical syntheses as a precursor or a catalyst. At room temperature, N2F4 is mostly associated with only 0.7% in the form of NF2. It was considered for use as a high energy liquid oxidizer. This is also called as Dinitro tetrafluoride.

To learn more about  Dinitro tetrafluoride. please visit:

https://brainly.com/question/13348005

#SPJ4

What is the general name for H2SO4?

Answers

The general name for H₂SO₄ is sulfuric acid.

Sulfuric acid is a strong acid that is commonly used in a wide range of industrial and laboratory applications, such as in the production of fertilizers, dyes, detergents, and explosives, among others. It is a dense, oily, and colorless liquid that is soluble in water and has a very high boiling point of 337 °C (639 °F).

It is also used as a laboratory reagent for various chemical reactions, and as an electrolyte in lead-acid batteries. It is a very strong acid that is capable of reacting with most metals, and it can cause severe burns and eye damage upon contact with the skin or eyes. Therefore, it should be handled with extreme caution and protective equipment should always be used when working with it.

To know more about Sulfuric acid here

https://brainly.com/question/30039513

#SPJ4

What is the generic name for Pepcid used to treat GERD?

Answers

Famotidine is the name of the generic version of Pepcid, a drug used to treat gastroesophageal reflux disease (GERD).

Famotidine is a member of a group of drugs known as histamine-2 (H2) blockers, which lessen the formation of stomach acid. Famotidine can aid in the relief of GERD symptoms such heartburn, regurgitation, and difficulty swallowing by lowering the quantity of acid in the stomach. There are several different formulations of famotidine, including tablets, capsules, and oral suspension.

Famotidine is a medication that belongs to a class of drugs known as histamine-2 (H2) blockers. It is used to decrease the production of stomach acid and is commonly used to treat conditions such as gastroesophageal reflux disease (GERD), peptic ulcer disease, and Zollinger-Ellison syndrome.

It works by blocking the action of histamine, a chemical in the body that stimulates the stomach to produce acid. By reducing the amount of acid in the stomach, famotidine can help relieve the symptoms of acid reflux and ulcers, such as heartburn, indigestion, and stomach pain.

To learn more about Famotidine :

https://brainly.com/question/29428125

#SPJ4

Select all of the reasons why water is essential to life.
- It dissolves a wide variety of substances.
- It plays a role in many chemical reactions.
- It regulates temperature.

Answers

Water is essential to life for multiple reasons, including its ability to dissolve a wide variety of substances, play a role in chemical reactions, and regulate temperature. (All Options)

Water is a unique and versatile substance that plays a crucial role in supporting life on Earth. One of its most important properties is its ability to dissolve a wide variety of substances, which makes it a vital component of many biological processes. For example, water helps to transport essential nutrients, minerals, and waste products throughout the body. Additionally, water plays a central role in many chemical reactions, such as those that occur in metabolic processes and energy production.

Finally, water is a good conductor of heat and helps to regulate temperature, which is essential for maintaining the stability of biological systems. Overall, water is an essential component of life and its properties play a critical role in supporting the diverse range of living organisms found on Earth.

Learn more about Water:

https://brainly.com/question/5060579

#SPJ4

which element has the lowest 1st ionization energy? A. As B.P C. N. D.Bi E.Sb

Answers

The element has the lowest 1st ionization energy is N ( nitrogen). Th correct answer is C.

First, the energy needed to remove one electron from a neutral atom in order to create a positive ion is referred to as the ionization energy or ionization potential. It is described as the energy difference between a neutral atom's and a positive ion's ground states.

The ease with which an atom can lose electrons and produce positive ions makes the initial ionization energy a crucial chemical feature of an element.

Higher first ionization energy suggest that removing an electron from an atom is more challenging, whereas lower first ionization energies suggest that removing an electron from an atom is simpler.

For each element, the first ionization energy varies, and it can be used to determine an element's electron configuration, electron affinity, reactivity, and chemical behavior.

Since nitrogen is a nonmetal, it has a lower initial ionization energy than metal elements like bismuth (Bi) or antimony (Sb).

Learn more about First ionization energy here: brainly.com/question/2120186

#SPJ4

The boiling point of methane is__

Answers

The boiling point or temperature at which methane molecule, CH₄, in its liquid state starts to form vapours is equals to the -258.9°F.

Methane: The molecular formula of methane is CH₄. Like other chemical compounds, methane also has physical properties, including boiling point, melting point, freezing point, etc. The boiling point is the temperature at which methane becomes a gas. The boiling point is the temperature at which the pressure exerted by the surroundings on the liquid equals the pressure exerted by the vapor of the liquid. It is a molecule with no hydrogen bonding (visible only between N/O/F and H), and since hydrogen bonding is by far the strongest intermolecular force, methane boils the coldest. It also has no permanent dipole permanent dipole forces due to it being tetrahedral so all the dipoles cancel and thus boils at a very low -162 °C. Therefore, the boiling point of methane is -258.9°F.

For more information about boiling point, visit :

https://brainly.com/question/4219986

#SPJ4

Function c is defined by the equation c(n)=50+4n. It gives the monthly cost, in dollars, of visiting a gym as a function of the number of visits, n. In this situation, what information would the inverse function give us? find the inverse function. Find the value of c(7). Show your reasoning and explain what the value means in this situation.

Answers

The inverse function of c(n) would give us the number of visits n as a function of the monthly cost c.

To find the inverse function, you will have to write n in terms of c (which means number of visits as function of monthly cost). To do this, you can rearrange the equation c(n) = 50 + 4n to obtain n = (c - 50) / 4.

The value of c(7) is c = 50 + 4n = 50 + 4(7) = 78 . This means that if you spend 78 dollars on a gym every month, you will have made 7 visits in total.

Additionally, it can also be useful to find the inverse function of c(n) if you have a budget in mind but don't know how many visits you can make within that budget. In this case, you can plug your budget into the inverse function to figure out how many visits you can make with the given amount of money.

Learn more about The inverse function of c(n) :

https://brainly.com/question/21527869

#SPJ4

Do You Know If Milk Is an Acid or a Base?

Answers

Milk is considered to be slightly acidic.

This is because it contains lactic acid, which gives it a slightly sour taste. However, it is not as acidic as substances like vinegar or lemon juice. The pH of milk is typically around 6.5-6.7, which is just below neutral on the pH scale (neutral is 7.0).
Mammary glands in mammals generate milk, a clear liquid meal. Before they can digest solid food, it serves as a young mammal's main source of nutrition. Milk immunity is a result of immune-related and immune-modulating elements.

It is important to note that the pH of milk can vary depending on factors such as the type of cow, the cow's diet, and the processing of the milk. However, in general, milk is considered to be an acid rather than a base.

To know more about Milk here:
https://brainly.com/question/30200555#

#SPJ11

Calculate the molar mass of NaBr?

Answers

The molar mass of NaBr will be 102.89 g/mol.

Sodium bromide (NaBr) is a white crystalline ionic compound that is made up of sodium cations (Na⁺) and bromide anions (Br⁻). It is used in various applications, including as a sedative, in the oil industry, and in the manufacture of photographic chemicals.

The molar mass of NaBr can be calculated by adding the atomic masses of sodium (Na) and bromine (Br) in one mole of NaBr. The atomic mass of sodium is 22.99 g/mol and the atomic mass of bromine is 79.90 g/mol, as found in the periodic table.

Therefore, the molar mass of NaBr is:

Molar mass of NaBr = atomic mass of Na + atomic mass of Br

Molar mass of NaBr = 22.99 g/mol + 79.90 g/mol

Molar mass of NaBr = 102.89 g/mol

To know more about Sodium bromide here

https://brainly.com/question/15409724

#SPJ4

what is the average distance between oxygen molecules at stp?

Answers

The average distance between oxygen molecules at STP is approximately 1.9 × 10^-8 cm.

What is Atomic Radius ?

Atomic radius is the distance between the nucleus of an atom and its valence electrons. It is typically measured in picometers (pm) or angstroms (Å) and is used to describe the size of an atom. The atomic radius can vary depending on the element and its electronic configuration, and can also vary in different states (ionization states, for example). The trend for atomic radius generally increases down a group on the periodic table and decreases across a period from left to right.

where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature.

The volume of one mole of gas at STP is 22.4 L according to the molar volume of a gas.

For oxygen gas (O2), the molar mass is approximately 32 g/mol. Therefore, one mole of oxygen gas contains 6.02 × 10^23 oxygen molecules.

Using the ideal gas law, we can solve for the volume of one oxygen molecule:

V = (RT/P) * (1/n)

V = (0.0821 L atm/mol K * 273 K / 1 atm) * (1 / 6.02 × 10^23 molecules)

V ≈ 4.0 × 10^-23 L

The volume of one oxygen molecule is incredibly small, so the average distance between oxygen molecules at STP is very close to zero. However, we can estimate the average distance by assuming that the molecules are arranged in a regular pattern, such as a simple cubic lattice.

In a simple cubic lattice, each oxygen molecule is surrounded by six nearest neighbors. The distance between adjacent molecules is equal to the cube root of the volume of one molecule and its six neighbors:

d = (V_molecules/6)^(1/3)

d = (4.0 × 10^-23 L / 6)^(1/3)

d ≈ 1.9 × 10^-8 cm

Therefore, the average distance between oxygen molecules at STP is approximately 1.9 × 10^-8 cm.

Learn more about Atomic Radius from given link

https://brainly.com/question/15255548

#SPJ4

what distinguishes the atoms of one element from another?

Answers

The atoms of one element are distinguished from another based on their atomic number, Each element has a unique number of protons in its nucleus, which gives it a unique atomic number.

For example, all carbon atoms have 6 protons in their nucleus, which gives carbon its unique atomic number of 6. All oxygen atoms have 8 protons in their nucleus, which gives oxygen its unique atomic number of 8. This means that the atomic number of an element determines its chemical properties and its position in the periodic table.

In addition to the number of protons, atoms of the same element can have different numbers of neutrons in their nucleus, which gives rise to different isotopes of the element.

Learn more about atoms here:

https://brainly.com/question/1566330

#SPJ4

Calculate bond order of N2?

Answers

Bond order of N2 is 3. It is a naturally occurring as a diatomic gas. N2 has a triple covalent bond between the nitrogen atoms.

The bond order is defined as a formal measure of the multiplicity of a covalent bond between two atoms. Bond order is the difference between the numbers of electron pairs in bonding and antibonding molecular orbitals. It is the number of bonding pairs of electrons between  the two atoms. A single bond has a bond order of one and a double bond has a bond order of two and a triple bond has a bond order of three in a covalent bond. A high bond order indicates that there is more attraction between the electrons. A higher bond order means that the atoms are held more tightly together. It indicates the stability of the bond. There is the greater the stability with higher bond order.

To learn more about Bond order please visit:

https://brainly.com/question/9713842

#SPJ4

If a sample of gas occupies 1.95 L at 301.5K, what will be its volume at 288.5K?

Answers

The new volume of the gas sample will be 1.86 L at 288.5 K.

What will be the volume of the gas?

The volume of a gas sample can be calculated from the equation of Charles's law given below.

V1/T1 = V2/T2

Where

V1 and T1 are the initial volume and temperature, and V2 and T2 are the final volume and temperature.

Rearranging the equation, we can find the final volume:

V2 = V1 * T2 / T1 = 1.95 L * 288.5 K / 301.5 K = 1.86 L

Learn more about the volume and temperature of gas at: https://brainly.com/question/17100204

#SPJ1

The volume of oxygen at STP given by IL of 10 volume solution of H2O2 is
a) IL
b) 10L
c) 0.1 L
d) 100 L​

Answers

The volume of oxygen produced by the decomposition of hydrogen peroxide depends on the amount of hydrogen peroxide that decomposes.

A 10-volume solution of hydrogen peroxide means that 1 liter of the solution can produce 10 liters of oxygen at STP when completely decomposed.

The balanced chemical equation for the decomposition of hydrogen peroxide is:

2 H2O2 (aq) → 2 H2O (l) + O2 (g)

So, 2 moles of hydrogen peroxide will produce 1 mole of oxygen gas at STP.

One mole of a gas at STP occupies 22.4 L.

Therefore, the volume of oxygen gas produced by 1 liter of 10-volume solution of hydrogen peroxide is:

1 L H2O2 solution x (10 moles O2 / 2 moles H2O2) x (22.4 L/mole) = 112 L O2

So, the correct answer is not one of the options provided. The volume of oxygen at STP given by 1 liter of 10-volume solution of hydrogen peroxide is 112 L

Mica has two metal blocks made from the same substance. She heats both blocks on the same stove for the same amount of time. She then measures the temperature. Metal Block A has a higher temperature than Metal Block B.

Answers

This situation is possible if Metal Block A has a lower specific heat capacity than Metal Block B. Specific heat capacity is the amount of heat energy required to raise the temperature of a substance by one degree Celsius per unit of mass.

What is specific heat?

Specific heat is the amount of heat energy required to raise the temperature of one unit of mass of a substance by one degree Celsius or Kelvin. It is a characteristic property of a substance and is expressed in units of J/(g·°C) or J/(g·K). Substances with a higher specific heat require more energy to raise their temperature compared to substances with a lower specific heat.

Here,

If a substance has a lower specific heat capacity, it means that it requires less heat energy to raise its temperature. So, if both blocks are made from the same substance but have different specific heat capacities, heating them for the same amount of time on the same stove would result in Metal Block A having a higher temperature than Metal Block B.

To know more about specific heat,

https://brainly.com/question/11297584

#SPJ1

What is a skeleton equation give example?

Answers

Skeletal equations are equations with simply the chemical formulas of the products and reactants, no mention of state, and no atom balancing on either side of the equation.

Classify each solid as a covalent, ionic, metallic, or molecularsolid.sodium sulfide, pure sodium, frozen carbon dioxide, diamond.

Answers

The classification of solid are :

Sodium sulfide - ionic solid

Pure sodium - metallic solid

Frozen carbon dioxide - molecular solid

Diamond - covalent solid

The sodium sulfide that is Na₂S is the compound formed by the ionic bonding. The sodium sulfide is classified as the ionic solid. The pure sodium exhibits the metallic bonding and comes under the metallic solid. The frozen carbon dioxide also called as the dry ice is the molecular solid.

The diamond is the network of the covalent bonding. Therefore the diamonds comes under the category of the covalent solid. The covalent bonds are formed between the atoms by the sharing of the electrons.

To learn more about solid here

https://brainly.com/question/30256244

#SPJ4

Which is the strongest interparticle force present in a sample of H3PO4? a. dipole―dipole forces b. ionic bonding forces c. ion―induced dipole forces
d. dispersion forces e. ion―dipole forces f. hydrogen bonding forces g. dipole―induced dipole forces

Answers

The strongest interparticle force present in the  sample of H₃PO₄ is the correct is  e. ion―dipole forces.

The intermolecular force of the attraction is the molecule H₃PO₄ that is phosphoric acid is the ion - dipole forces. The ion - dipole force is  the attractive force that will results from the electrostatic attraction in  between the ion and the neutral molecule that will have the dipole. The intermolecular force of attraction is the attractive and the repulsive forces that will arise in between the molecules of the substance.

Thus, the  H₃PO₄ that is phosphoric acid sample has the strongest ion - dipole forces of intermolecular attraction.

To learn more about force here

https://brainly.com/question/22524652

#SPJ4

according to the information in the graphs and the table how was species diversity in the aquatic ecosystems affected by the increased water temperature

Answers

Species diversity in aquatic ecosystems is significantly affected by the increased water temperature. This is because warm water holds less dissolved oxygen than cool water, and may not contain enough dissolved oxygen for the survival of different species of aquatic life.

What is an ecosystem?

An ecosystem may be defined as a type of place or an area where members of different species live together and interact with one another for the purpose of food, shelter, space, mating partner, and other resources.

The solubility of oxygen and other gases will decrease as temperature increases. This means that colder lakes and streams can hold more dissolved oxygen than warmer waters. If water is too warm, it will not hold enough oxygen for aquatic organisms to survive.

Some compounds are also more toxic to aquatic life at higher temperatures. So, warm stream water is can affect the aquatic life in the stream.

To learn more about Species diversity, refer to the link:

https://brainly.com/question/1446827

#SPJ1

The volume of a balloon was 4.21 L when the temperature was 25.0 °C, what will the volume of the balloon be when the temperature is
50.0°C?

Answers

To solve this problem, we need to use the ideal gas law, which relates the pressure (P), volume (V), number of moles (n), and temperature (T) of a gas:

PV = nRT

where R is the universal gas constant.

Assuming that the number of moles and the pressure of the gas remain constant, we can write:

V1/T1 = V2/T2

where V1 is the initial volume of the balloon, T1 is the initial temperature, V2 is the final volume of the balloon, and T2 is the final temperature.

Plugging in the given values:

V1 = 4.21 L
T1 = 25.0 °C + 273.15 = 298.15 K (converting to Kelvin)
T2 = 50.0 °C + 273.15 = 323.15 K (converting to Kelvin)

We can solve for V2:

V2 = V1 x T2/T1
V2 = 4.21 L x (323.15 K / 298.15 K)
V2 = 4.21 L x 1.084
V2 = 4.56 L (rounded to two decimal places)

Therefore, the volume of the balloon will be 4.56 L when the temperature is 50.0°C.

The noble gas shorthand configuration for ruthenium would have which noble gas as its core?
(a) He
(b) Ne
(c) Ar
(d) Kr.

Answers

The noble gas shorthand configuration for ruthenium would have Kr noble gas as its core.

Generally, the electron configuration of an element describes how electrons are distributed among its atomic orbitals. Basically, electron configurations of atoms follow a standard notation in which all electron-containing atomic subshells along with the number of electrons they hold written in superscript and are placed in a sequence.

The electronic configuration of Kr is given as,

Kr = [Ar] 3d¹⁰ 4s² 4p⁶

Hence, the atomic number of ruthenium is 44. So, the noble gas used for shorthand configuration for ruthenium is Krypton (Kr).

Therefore, the correct option is D.

Learn more about electronic configuration from the link given below.

https://brainly.com/question/29757010

#SPJ4

What is the ideal molecular geometry for SF6?

Answers

The Sulfur hexafluoride molecule, SF₆ consists six fluorine atoms with sulfur as central atom. Thus the ideal molecular geometry for SF₆ is octahedral.

Sulfur hexafluoride, or SF₆, is an inorganic greenhouse gas. It is non-flammable, odorless and colorless. In order to determine the Lewis structure of any molecule, we must first know the total number of valence electrons. Here we find the total number of valence electrons for SF₆, by adding the valence electrons for the sulfur and fluorine atoms. Total valence electrons in SF₆

= Sulfur valence electrons + Fluorine valence electrons. Total number of valence electrons in SF₆= 6 + 7×6 = 6 + 42

= 48 valence electrons

SF₆ therefore has 48 valence electrons.

Now look at the sulfur hexafluoride molecule, the sulfur is in the central position with the fluorine atoms arranged symmetrically around it. The atoms are arranged in an octahedral pattern, making the molecular geometry of SF₆ octahedral.

For more information about molecular geometry visit :

https://brainly.com/question/19354582

#SPJ4

Which type of isomer differs in the covalent arrangement of atoms?

Answers

Types of isomers that differ in the arrangement of covalent atoms are structural isomers.

Definition of Isomers

Isomers are compounds with the same molecular formula but different structural formulas and do not necessarily share the same properties. Generally, isomers have similar chemical properties to each other. In general, isomers are divided into two, namely structural isomers and geometric isomers.

Structural isomers occur due to differences in the arrangement of structural bonds between atoms and functional groups in a molecule. There are three types of structural isomers namely skeletal isomers, positional isomers and functional group isomers.

Geometric isomers are isomers that are caused by a limitation of free rotation of a bond in a molecule. In contrast to structural isomers, these isomers occur only in compounds that have a rigid bond with two dissimilar sides and, usually, occur in alkenes.

Learn more about Isomers at: https://brainly.com/question/2072895

#SPJ4

a polar covalent bond between two atoms results from

Answers

Two atoms with various electronegativity levels. The electrons in a bond are not distributed equally when one atom is bound to a more electronegative atom. Polar covalent bonds are this kind of bond.

What is a covalent bond?A chemical link known as a covalent bond includes the sharing of electrons to create electron pairs between atoms. These electron pairs are referred to as shared pairs or bonding pairs. When atoms share electrons, a constant balance between the forces that pull them in opposite directions results in covalent bonding. Atoms share electron pairs through covalent connections. H-H or C-H are examples of nonpolar covalent bonds involving atoms with similar or identical electronegativity, while polar covalent bonds are formed when unequal electronegativity is shared across atoms (e.g., H–O). A shared electron pair is the Lewis definition of a covalent bond. In hydrogen chloride, a hydrogen atom and a chlorine atom form the following chemical connection.

To learn more about covalent bond refer to:

https://brainly.com/question/3447218

#SPJ4

what is the type of polyester that gets formed in the reaction between ethylene glycol and phthalic anhydride?

Answers

The polyester that is formed in the reaction between ethylene glycol and phthalic anhydride is called polyethylene terephthalate (PET).

PET is a thermoplastic polymer that is used in a wide range of applications, including textile fibers, packaging films, and engineering plastics. It is formed by the condensation polymerization of ethylene glycol and terephthalic acid (or its dimethyl ester), but phthalic anhydride can also be used in place of terephthalic acid.

In the reaction between ethylene glycol and phthalic anhydride, the two monomers undergo a condensation reaction to form a linear polyester chain with ester linkages between the monomer units. This polyester chain can then undergo further reactions to form a variety of different structures and materials.

Learn more about polyester here:

https://brainly.com/question/11112056

#SPJ4

Other Questions
12. Some civilizations devoted time and resources to the rich, the supernatural, and the dead. What didthe Indus Valley inhabitants focus on? What is the minimum amount of liability coverage required in a motor vehicle policy issued in Washington for damage to the property of any one accident? give the term for the amount of solute in moles per kilogram of solvent. Which of the following is accurate regarding the speed and cost of alternative dispute resolution (ADR)? Multiple Choice - It is usually faster and cheaper than litigation - No formal studies have been conducted regarding the speed and cost ADR, so the answer is unknown - It is usually slower, but less expensive, than litigation - It is usually slower and more expensive than litigation - It is usually faster, but more expensive, than litigation Find the distance between A and B suppose you throw five dice and all outcomes are equally likely. (a) what is the probability that all dice are the same? (in the game of yahtzee, this is known as a yahtzee.) 1/6^5 what is the ultimate source of the electrons that are transferred during the light-dependent reactions of photosynthesis? The price of peanut butter rises from $1 per jar to $2 per jar. The quantity of grape jelly consumed falls from 6 million jars per year to 2 million jars. What is the arc cross-price elasticity of demand? Which of the following reasons accurately describe why networks are so important to social workers:A. clients benefit from informal helpful networksB. networks reach out to clients who might not seek servicesC. Networks assist formal resource systemsD. Networks help clients receive services from formal systemsE. All of the above What do you mean by aversive? In "Dust Storm," J. Malcolm Garcia uses two parallel plot lines to express a theme about the different ways people can become lost. Which two plot lines support this theme? Select one: a. Jamsheds mind is clouded by his biases and previous experiences, and Garcia is lost in an actual cloud of dust. b. Shopkeeper Haji More Din leads Garcia out of the storm, just as Pakistan leads America out of war. c. Pashtunabad is full of fear and chaos, just as the author is frightened and confused by the unusual dust storm. d. The author is physically lost in a dust storm, and the United States seems "lost" about how to handle conflict in the Middle East. why does the equation y = 3x + 5 not represent a proportional relationship? The amount of time it takes to finish a race might be a function of which of the following?A. the entry fee of the raceB. the distance of the raceC. the number of people involved in the race he probability distribution of x, the number of defective tires on a randomly selected automobile checked at a certain inspection station, is given in the following table.x01234p(x).55.16.07.06.16(a) Calculate the mean value of x.?x =(b) What is the probability that x exceeds its mean value?P (x > ?x) = imagine a planet moving in a perfectly circular orbit around the sun. is this planet experiencing acceleration? When a population is subject to both drift and selection at a locus, we expect selection to dominate in its effects on allele frequency change when population size is -and selection is -. We expect drift to dominate when population size is -and selection is - What is the answer it is so confusing Now that Ruthie has been infected with the chickenpox virus, what is the first step in the immune response that helps her fight off the virus?a) the display of antigenic fragments in Class I and II MHC proteins in the plasma membranes of antigen-presenting cellsb) antigen recognition by CD8 T cells and CD4 T cellsc) T cell activation and division to produce both active cytotoxic T cells and memory T cellsd) activation of B cells, which divide to produce memory B cells and plasma cells that secrete antibodies As part of their application for a loan to buy lakeside farm, a property they hope to develop as a bed-and-breakfast operation, the prospective owners have projected: monthly fixed cost (loan payment, taxes, insurance, maintenance) $6000 variable cost per occupied room per night $ 20 revenue per occupied room per night $ 75 a. Write the expression for the total cost per month. Assume 30 days per month b. Write the expression for total revenue per month. C. If there are 12 guest rooms available, can they break even? what percentage of rooms would need to be occupied, on average, to break even?. the distance from one trough to another trough is called a