an internal router connects different ip ________. an internal router connects different ip ________. A. subnets
B. networks C. neither a nor b
D. both a and b

Yes, I can craft an algorithm to solve a simple problem programmatically.

An algorithm is a set of instructions that a computer can follow to solve a particular problem or accomplish a task. Here is an example of a simple algorithm to calculate the average of three numbers:

The above algorithm can be implemented in any programming language, such as Python, C++, or Java, with some minor changes to the syntax. The algorithm takes three numbers as input from the user calculates their sum, and then divides the sum by 3 to get the average. Finally, it outputs the average to the user.

This is a simple example, but algorithms can become much more complex depending on the problem they are designed to solve. However, the basic steps remain the same - take input, process it, and produce output. By breaking a problem down into these steps, we can design algorithms that can be implemented in software to automate a wide range of tasks.

Know more about the Algorithm here :

https://brainly.com/question/24953880

#SPJ11

True anomaly detectors use a database of known attack sign.

Anomaly detectors are a type of security tool that help identify abnormal behavior on a network or system. They do this by comparing current activity to a database of known attack signatures, which can include specific patterns or sequences of actions that are indicative of a particular type of attack. By identifying these signatures, anomaly detectors can alert security teams to potential threats and help prevent them from causing harm.

Anomaly detectors are just one type of security tool that organizations can use to protect their networks and systems. These tools are designed to look for patterns of activity that deviate from the norm, which could indicate an attack or other malicious behavior. There are a few different ways that anomaly detectors can work, but one common approach is to use a database of known attack signatures to help identify potential threats. This database can include a variety of different signatures, such as IP addresses, network ports, protocols, file types, and more. Each signature represents a specific type of attack or malicious activity, and the detector uses these signatures to compare incoming traffic to the expected baseline for that system or network. If the detector sees traffic that matches one of these signatures, it can generate an alert and notify the security team. One of the advantages of using a database of known attack signatures is that it can help anomaly detectors identify attacks that might otherwise go unnoticed. For example, if an attacker is using a new type of malware that has not yet been seen before, a traditional signature-based approach might not be able to detect it. However, if the anomaly detector has a signature for that specific type of malware, it can still identify the attack and alert the security team.

To know more about anomaly detector visit:

https://brainly.com/question/27658847

#SPJ11

True. Prolog applies resolution in a strictly linear fashion, replacing goals from left to right.

This means that Prolog will attempt to unify the first goal in a query, then move on to the second goal, and so on. If a goal fails to unify, Prolog backtracks and attempts to find a different solution. This linear approach to resolution can sometimes lead to inefficient searching, but it is a fundamental characteristic of Prolog's execution model.

Prolog applies resolution in a strictly linear fashion, replacing goals from left to right. It uses a depth-first search strategy to find solutions, which means it processes the goals in the order they are written, starting from the leftmost goal and moving towards the right.

To know more about Prolog applies visit:-

https://brainly.com/question/31755155

#SPJ11

The statement given "while using a new windows system, you find that the double-click speed setting on the mouse pointer is set much slower than you would prefer. you want to increase the double-click speed setting." is true because while using a new Windows system, you find that the double-click speed setting on the mouse pointer is set much slower than you would prefer, and you want to increase the double-click speed setting.

While using a new Windows system, you realize that the double-click speed setting on the mouse pointer is slower than your preference. To rectify this, you need to adjust the double-click speed to a higher setting. This allows you to customize the speed at which you have to double-click the mouse button to perform various actions, such as opening files or launching applications. By increasing the double-click speed, you can enhance your overall user experience and improve the efficiency of navigating through the operating system.

You can learn more about Windows system at

https://brainly.com/question/27764853

#SPJ11

The correct answer to the given question is D) stream cipher. A stream cipher is a type of encryption method that encrypts digital data in a continuous stream, one bit or one byte at a time.

In a stream cipher, a secret key is used to encrypt the plaintext message into ciphertext. The key is also used at the receiving end to decrypt the message back into plaintext. The key is typically generated by a pseudorandom number generator (PRNG), which produces a sequence of numbers that appear to be random but are actually deterministic based on an initial value called a seed.Stream ciphers are commonly used in applications that require encryption of real-time data, such as voice or video communication, as they can encrypt and decrypt data in real-time. They are also used in situations where the data being transmitted is of an unknown length, as they can encrypt data continuously until the end of the message is reached.Stream ciphers are different from block ciphers, which encrypt data in fixed-size blocks. In a block cipher, the plaintext is divided into fixed-size blocks before encryption, and the blocks are encrypted one at a time.

To know more about stream visit:

brainly.com/question/13267401

#SPJ11

If you are having trouble reaching a target destination network, and you need to know the route it is taking, you should use the "tracert" command.

So, the correct answer is B.

This command allows you to display each hop or router that your connection is passing through on the way to the destination network. Tracert is a helpful troubleshooting tool as it can show where a connection issue may be occurring, such as a router blocking traffic or a server not responding.

Using the tracert command can help you identify and resolve connectivity issues quickly, ensuring that you can access the resources you need.

Hence,the answer of the question is B.

Learn more about network at https://brainly.com/question/29561829

#SPJ11

The statement "today, the most expensive part of the network is the hardware" is generally true. However, it's essential to note that it varies depending on the size of the network and the kind of hardware involved.

Networks involve a combination of hardware and software components. The hardware components are the physical elements, such as cables, switches, routers, servers, and workstations. The software components are the intangible parts, such as the applications, operating systems, and network protocols. The cost of the network hardware depends on its type and quality. However, it's widely known that the cost of network hardware is relatively expensive compared to software components. The cost of a network's hardware depends on the size of the network and the kinds of equipment required. Smaller networks often use less expensive and lower-quality hardware than larger networks. On the other hand, more extensive networks require more expensive and higher-quality hardware.To sum up, network hardware is generally more expensive than software. The cost varies based on the size of the network and the type of equipment used.

To know more about expensive visit:

https://brainly.com/question/29453606

#SPJ11

A valid IP for another host on the same network as 67.32.12.90/24 would be any IP within the range of 67.32.12.1 to 67.32.12.254.

Explanation:

The IP address 67.32.12.90/24 is a class C network address, meaning that the first three octets (67.32.12) identify the network, and the last octet (90) identifies the specific host on that network. The "/24" indicates that the subnet mask for this network is 255.255.255.0, which means that the first three octets are fixed, and only the last octet can vary.

To find a valid IP of another host on the same network, we need to keep the first 24 bits of the IP address the same as 67.32.12.90 and change the last 8 bits to a different value. However, we cannot use the IP address 67.32.12.90 itself, as it is already assigned to the NIC.

In order for two hosts to communicate on the same network, they must have IP addresses that are within the same range of addresses. For this network, any IP address within the range of 67.32.12.1 to 67.32.12.254 would be valid for another host to communicate with the NIC at 67.32.12.90. This is because the subnet mask of 255.255.255.0 limits the range of possible host addresses to 254 (0 and 255 are reserved), and any IP address within that range would be on the same network as 67.32.12.90.

Know more about the IP address click here:

https://brainly.com/question/31026862

#SPJ11

The function that reads a string from the standard input device is "fgets". This function is a standard library function in C and it reads a line of text from the input stream and stores it in a character array.

The "fputs" and "puts" functions, on the other hand, are used to write a string to the output device. The "getstr" function is not a standard library function in C. If you were referring to "gets", then it is an outdated function that is no longer recommended to be used due to security vulnerabilities.

The function that reads a string from the standard input device is "fgets". It takes a string from the standard input (usually the keyboard) and stores it in a buffer. The "puts" or "fputs" function can then be used to output the string to the standard output device (usually the screen).  

To know more about function visit-

https://brainly.com/question/21145944

#SPJ11

A specific circumstance monitored by JavaScript, typically as a result of a visitor performing an action, is known as an event. Events in JavaScript are actions or occurrences that happen within a web page, such as a button click, mouse movement, or form submission. JavaScript provides event handlers and listeners to detect and respond to these events.

Event handlers are functions that are executed when a specific event occurs. They are attached to specific elements on a web page and are triggered when the associated event takes place. For example, you can define a click event handler to perform a certain action when a user clicks on a button.

Event listeners are another way to monitor events in JavaScript. They are functions that listen for specific events and respond accordingly. By attaching event listeners to elements, you can detect events and perform actions based on those events.

With the help of events and event handling in JavaScript, developers can create interactive and dynamic web pages that respond to user actions. By monitoring events, JavaScript allows for enhanced user experiences and enables the execution of specific code or functionality based on user interactions.

For more such questions on JavaScript, click on:

https://brainly.com/question/16698901

#SPJ8

Using this algorithm, we can factor 8051 as 83 x 97. This confirms that one of the factors in our product (7968)(7954) is indeed divisible by 8051, and shows how we can use modular arithmetic to factor a number.

In order to factor 8051 using the given information, we need to first understand what the statement "7961^2 = 7^2 (mod 8051)" means.
In modular arithmetic, the notation "a ≡ b (mod n)" means that a and b have the same remainder when divided by n. In other words, a and b differ by some multiple of n. For example, 7 ≡ 14 ≡ -13 ≡ 28 (mod 7), since all of these numbers have a remainder of 0 when divided by 7.
In this case, the statement "7961^2 = 7^2 (mod 8051)" tells us that the square of 7961 and the square of 7 have the same remainder when divided by 8051. We can use this fact to write an equation:
7961^2 - 7^2 ≡ 0 (mod 8051)
We can simplify the left-hand side of this equation using the difference of squares:
(7961 + 7)(7961 - 7) ≡ 0 (mod 8051)
(7968)(7954) ≡ 0 (mod 8051)
Now we have a product of two numbers that is equivalent to 0 modulo 8051. This means that at least one of the factors must be divisible by 8051. We can use this fact to try to factor 8051.
We can start by checking if 8051 is divisible by 2 or 5. It is not, so we can move on to checking odd numbers. We can try dividing 8051 by 3, which gives a quotient of 2683 with a remainder of 2. This means that 8051 is not divisible by 3.
We can continue checking odd numbers by trying to divide 8051 by 7, which gives a quotient of 1150 with a remainder of 1. This means that 8051 is not divisible by 7 either.We can continue in this way, trying to divide 8051 by larger and larger prime numbers. However, this can be a time-consuming process, especially for larger numbers.Alternatively, we can use a technique called the Pollard rho algorithm to factor 8051. This is a probabilistic algorithm that works by generating a sequence of numbers using a specific function, and looking for repeated values in the sequence. If we find a repeated value, we can use it to factor the number.

To know more about algorithm visit:

brainly.com/question/28197566

#SPJ11

The three basic approaches to training are on-the-job training, classroom training, and online training.

On-the-job training involves learning while performing tasks in the actual work environment, providing hands-on experience and immediate application. Classroom training takes place in a traditional classroom setting, with an instructor delivering lectures and conducting interactive activities. It allows for direct interaction and personalized guidance. Online training utilizes digital platforms to deliver training content remotely, offering flexibility in terms of time and location. It often includes multimedia resources, self-paced modules, and interactive assessments. Each approach has its advantages and disadvantages. On-the-job training emphasizes practical skills, classroom training facilitates interaction, and online training offers flexibility and scalability. Organizations can choose the approach or a combination based on their specific training needs and the resources available.

learn more about online training here:

https://brainly.com/question/30672199

#SPJ11

Sure! Here's the first version of the elevator simulation that includes the changes to the five classes: Building, Rider, Floor, Elevator, and Simulation.

In this version, the Building class represents the overall building with a specified number of floors and elevators. The add_rider method randomly selects a floor and adds a rider to that floor. The step method is responsible for each iteration of the simulation, where it triggers the elevators to open their doors on the current floor.The Rider class represents a rider in the building. The Floor class represents a floor with a list of riders. The Elevator class represents an elevator with its current floor. The open_doors method of the Elevator class opens the doors of the elevator on the specified floor, allowing riders to exit (but not actually leave).The Simulation class sets up the building and runs the simulation for a specified number of steps.Please note that this is a basic implementation of the elevator simulation and doesn't include more advanced features like rider movement between floors or elevator movement.

learn more about version here :

https://brainly.com/question/18796371

#SPJ11

A computer program that appears to be performing one function, while in reality, it is performing another function, is commonly referred to as a Trojan horse or Trojan.

The term Trojan horse comes from the Greek myth in which the Greeks used a giant wooden horse to trick the Trojans into letting them inside the walls of Troy. Similarly, Trojan malware is designed to trick the user into downloading and installing the software, while hiding its true intent. Once the Trojan is installed, it can carry out a range of malicious actions, including stealing sensitive data, installing additional malware, and giving unauthorized access to the attacker. It is important to have up-to-date antivirus software and to avoid downloading software from untrusted sources to protect against Trojan attacks.

learn more about Trojan horse here:

https://brainly.com/question/9171237

#SPJ11

Adding a proposed Store Sum (ss) instruction to LEGv8 would require several changes in its architecture. Firstly, we would need to create a new functional block to calculate the sum of the data stored in Rn and the immediate value.

This block would be connected to the existing functional blocks for storing and loading data from memory.

Secondly, we would need to modify the existing functional block responsible for writing data to registers, to support the new instruction. The new block would be responsible for writing the sum of Rn and immediate value to the register specified by Rd.

To support this instruction, we would also need new data paths to connect the new functional blocks to the existing ones. These data paths would allow data to flow from the calculation block to the register-writing block and to the memory block.

Finally, we would need new signals from the control unit to control the new functional blocks and data paths. These signals would indicate when to perform the sum calculation, when to write data to memory, and when to write data to the register specified by Rd.

To demonstrate the implementation of this new instruction, we can modify Figure 4.23 to include the new functional blocks and data paths. The figure would show the flow of data and signals for the ss instruction, including the calculation of the sum, writing to memory, and writing to the register specified by Rd.

To know more about architecture visit

https://brainly.com/question/31772086

#SPJ11

As a data analyst, you will have multiple files for any given project. The  to organize these files in a useful manner is called file management.

Moss note that  good file organization enhances productivity and allows for quick access to essential data and resources. By organizing your files in a logical and consistent manner, you make it easier for you and others to discover and utilize them.

Data analysis is critical because it helps organizations better understand their consumers, increases sales, enhances customer targeting, saves expenses, and enables the development of better problem-solving methods.

Learn more about data analyst, at:

https://brainly.com/question/30407312

#SPJ1

The process that is being described in the question is called steganography. Steganography is a method of hiding secret information within an innocent-looking carrier file, such as an image, video, or audio file.

This process involves embedding the encrypted message within the carrier file in such a way that it is not noticeable or easily detectable. Steganography has been used for centuries as a way of covertly transmitting messages, and in the digital age, it has become an important tool for securing sensitive information. It is often used by intelligence agencies, military organizations, and law enforcement agencies to exchange secret information without raising suspicion.

learn more about steganography. here:

https://brainly.com/question/31761061

#SPJ11

False. A C++ switch statement allows only one case to be executed.

Explanation:

A C++ switch statement allows only one case to be executed. The case that is executed is determined by the value of t
he switch expression. The switch statement first evaluates the expression and then compares it to each case label. If the value of the expression matches the value of a case label, the statements associated with that case are executed. Once a match is found and the statements are executed, the switch statement ends.

A switch statement is a control statement in C++ that allows the program to choose one of several execution paths based on the value of an expression. The switch statement evaluates the expression and compares it to a list of case labels, each of which contains a constant value. If the value of the expression matches the value of a case label, the statements associated with that case are executed. The switch statement can also include a default case, which is executed when none of the other cases match the value of the expression.

It is important to note that only one case is executed in a switch statement. Once a match is found, the statements associated with that case are executed and the switch statement ends. If the program needs to execute multiple cases based on a single expression, the cases can be combined using fall-through statements. However, using fall-through statements can make the code more difficult to read and maintain, and is generally discouraged. Overall, the switch statement is a useful tool for controlling the flow of a program based on the value of an expression.

Know more about the control statement click here:

https://brainly.com/question/31792990

#SPJ11

In the world of big data, advanced analytics aids organizations in processing and analyzing large volumes of multistructured data.

Examples of advanced analytics include indexing and search, graph analysis, machine learning, natural language processing, and predictive analytics. These tools allow organizations to make sense of complex data sets and gain insights that can help them make more informed decisions. Advanced analytics also enables businesses to identify patterns, trends, and anomalies in their data, which can help them optimize operations, improve customer experiences, and drive growth. In short, advanced analytics is a crucial component of any big data strategy, enabling organizations to extract maximum value from their data.

learn more about advanced analytics here:

https://brainly.com/question/28080527

#SPJ11

The term used to describe a virtualized environment that hosts Win32 apps on the 64-bit version of Windows 10 is "Windows on Windows 64" (WOW64). Option B is answer.

WOW64 (Windows on Windows 64) is a compatibility layer in the Windows operating system that allows running 32-bit applications (Win32 apps) on a 64-bit version of Windows, such as Windows 10. It provides the necessary support and translation mechanisms to ensure compatibility between the different architectures.

With WOW64, 32-bit applications can be executed seamlessly in the 64-bit environment without requiring modifications. It allows users to take advantage of the benefits of a 64-bit operating system while still being able to run legacy 32-bit applications.

Option B, "Windows on Windows 64 (WOW64)," is the correct answer.

You can learn more about Windows 64 at

https://brainly.com/question/31914426

#SPJ11

a. The total number of possible outcomes of the coin-tossing experiment can be calculated using the formula 2ⁿ,b. To calculate the number of outcomes with exactly five heads, we use the combination formula C(n, k),

a. The total number of possible outcomes of the coin-tossing experiment can be calculated using the formula 2ⁿ, where n is the number of tosses. In this case, n = 10, so there are 2¹⁰ = 1024 possible outcomes.

b. To calculate the number of outcomes with exactly five heads, we use the combination formula C(n, k), where n is the total number of tosses and k is the number of heads. So, C(10, 5) = 252 outcomes have exactly five heads.

c. To calculate the number of outcomes with at least nine heads, we sum the outcomes with nine heads and ten heads. There is one outcome with ten heads (HHHHHHHHHH) and C(10, 9) = 10 outcomes with nine heads. So, the total is 1 + 10 = 11 outcomes.

d. To calculate the number of outcomes with at most one tail, we sum the outcomes with zero tails and one tail. There is one outcome with zero tails (HHHHHHHHHH) and 10 outcomes with one tail (THHHHHHHHH, HTHHHHHHHH, ..., HHHHHHHHHT). So, the total is 1 + 10 = 11 outcomes.

Learn more about coin-tossing

brainly.com/question/31361769

#SPJ11

The answer to this question is A. Both SQL statements will produce the same results. The first SQL statement uses the logical operators "greater than" and "less than" to specify a range of values for the credit_limit column.

The second SQL statement uses the "between" operator to specify the same range of values. Using the "between" operator can be more concise and easier to read than using the logical operators, especially when there are multiple conditions in the WHERE clause. However, both methods are valid and will produce the same results in this case.It's important to note that when using the "between" operator, the values specified in the range (100 and 10000 in this case) are inclusive. This means that records with a credit_limit of exactly 100 or 10000 will be included in the result set. In conclusion, the answer to the question is A. Both SQL statements will produce the same results, and it's up to the preference of the developer which method to use.

Learn more about logical here

https://brainly.com/question/28418750

#SPJ11

A9. Index is a database feature that enables faster data retrieval by creating a sorted list of values based on one or more columns of a table. By creating an index on a table, database management systems can quickly locate specific records and retrieve data more efficiently.

To create an alphabetical index on customer name in the customer table, you would need to use the SQL command CREATE INDEX. The specific syntax for creating an index depends on the database management system you are using, but the basic steps involve specifying the table and column(s) to be indexed and the type of index to be created.
b

This would create a non-clustered index called "idx_customer_name" on the customer_name column of the customer table. The index would be sorted alphabetically and would allow for faster data retrieval when searching for customer records based on their name.

To know more about database visit:-

https://brainly.com/question/30634903

#SPJ11

The given statement "advances in technology has led to manufacturers requiring less inventory on-hand and consequently less spatial needs." is true. because the advances in technology have revolutionized the way manufacturers operate, especially in terms of inventory management.

With the help of advanced software and technology, manufacturers can now monitor their inventory levels in real-time, and they can predict future demand accurately. This has allowed them to reduce the amount of inventory they need to keep on-hand, which, in turn, has reduced their spatial needs. Additionally, advancements in technology have allowed for more efficient production methods, which means manufacturers can produce goods in smaller batches and with shorter lead times.

This means that they no longer need to keep large amounts of inventory on-hand to meet customer demand. Overall, the technological advances have resulted in a more streamlined and efficient manufacturing process, which has allowed manufacturers to operate with less inventory and less spatial needs.

Learn more about technology manufacturers:  https://brainly.com/question/13044551

#SPJ11

Hi! I understand that you need help with your ISQA 3310 homework, which involves writing SQL statements for the Employees-Assignments-Projects tables. However, due to the 200-word constraint, I'll provide answers for the first 4 criteria.

Please feel free to ask for additional assistance if needed.
1. To list all employees:
```
SELECT * FROM Employees;
```
2. To list all projects:
```

SELECT * FROM Projects;
```
3. To display the total number of employees assigned to each project:
```
SELECT p.project_id, p.project_name, COUNT(e.employee_id) AS total_employees
FROM Projects p
JOIN Assignments a ON p.project_id = a.project_id
JOIN Employees e ON a.employee_id = e.employee_id
GROUP BY p.project_id, p.project_name;
```
4. To list employees who have not been assigned to any project:
```
SELECT e.employee_id, e.employee_name
FROM Employees e
LEFT JOIN Assignments a ON e.employee_id = a.employee_id
WHERE a.assignment_id IS NULL;
```
These are the SQL queries for the first 4 criteria based on the information you provided. If you have more criteria to address, please provide additional details, and I'd be happy to help further.

Learn more about SQL here

https://brainly.com/question/25694408

#SPJ11

A small triangle at the CLK input on a standard flip-flop symbol indicates that the flip-flop is edge-triggered, meaning any change in the output occurs specifically during a clock transition, such as the rising or falling edge of the clock signal.

A flip-flop is a basic building block of digital circuits used for storing binary data. The small triangle at the CLK input on a flip-flop symbol indicates that the flip-flop is edge-triggered, meaning that the output changes only on a specific edge of the clock signal, either the rising or falling edge. This behavior ensures that the flip-flop output changes only when the clock signal meets certain conditions, leading to synchronized and predictable operation of the digital circuit. This design is particularly useful for applications where precise timing is critical, such as in synchronous digital circuits or in systems that require coordinated operation of multiple flip-flops.

Learn more about triangle here;

https://brainly.com/question/2773823

#SPJ11

It is in the "database buffer cache" that the system stores space for users' connections, query executions, and SQL statements used by the system.

The database buffer cache is a memory area within a database management system (DBMS) where frequently accessed data is temporarily stored. It serves as a buffer between the disk storage and the users' queries or transactions. When users connect to the database, execute queries, or run SQL statements, the DBMS retrieves the necessary data from the disk into the buffer cache for faster access. By keeping frequently accessed data in memory, the database buffer cache reduces the need for disk I/O operations, which can significantly improve query performance and overall system responsiveness. This cache is managed by the DBMS to optimize data retrieval and ensure efficient use of available memory.

Learn more about the database buffer cache here:

https://brainly.com/question/28232012

#SPJ11

Based on the given scenario, the operating system that is most likely being used for the computer is Windows Server.

Windows Server is designed for server-based functions such as hosting websites, responding to Active Directory requests, managing databases, and file sharing.

It provides a stable and secure environment for running critical applications and services.
Windows Server also has advanced management tools and features that enable administrators to monitor and troubleshoot servers remotely.

These features include event logging, performance monitoring, and remote management capabilities.
Moreover, Windows Server is known for its scalability, which means that it can handle increasing workloads and demands as the organization grows. T

his makes it an ideal choice for businesses and enterprises that require a reliable and robust server platform to support their operations.
For more questions on Windows Server

https://brainly.com/question/30708895

#SPJ11

The most likely operating system being used for a computer that serves web pages and responds to Active Directory requests is Microsoft Windows Server.

Windows Server is designed to provide server functionality and comes with features such as Internet Information Services (IIS) for serving web pages, and Active Directory for managing users, groups, and permissions.

Windows Server is a widely used operating system for businesses and organizations, particularly those that require a reliable and secure platform for web hosting and network management. It offers features such as role-based access control, server virtualization, and remote access, making it a suitable choice for managing and securing web servers and Active Directory services.

Other operating systems such as Linux and Unix can also be used for serving web pages and responding to Active Directory requests, but Windows Server is often preferred due to its compatibility with Microsoft technologies and the availability of enterprise-level support.

Learn more about operating system here:

https://brainly.com/question/31551584

#SPJ11

Design a PDA for b) by using transitions that push 0's and pop 1's, ensuring no prefix has more 1's than 0's; for c) alternate pushing and popping 0's and 1's.


For language b), you can design a PDA as follows:
1. Start in state q0.
2. When reading a 0, push it onto the stack and remain in state q0.
3. When reading a 1, pop a 0 from the stack and transition to state q1.
4. In state q1, if a 0 is read, push it onto the stack and return to q0; if a 1 is read, pop a 0 and remain in q1.
5. Accept by empty stack.

For language c), design a PDA with these steps:
1. Start in state p0.
2. When reading a 0, push it onto the stack and transition to state p1.
3. In state p1, if a 0 is read, return to p0; if a 1 is read, pop a 0 and remain in p1.
4. Accept by empty stack.

Learn more about alternate pushing here:

https://brainly.com/question/28391221

#SPJ11

This is because linear complexity (O(7n)) is less complex than quadratic complexity (O(n^2)), which is less complex than cubic complexity (O(n^3)). we know that the algorithm has a squared complexity, which means that the time it takes to execute increases quadratically with the size of the input data.

In other words, if it takes 10 seconds to run on data with 100 elements, we can expect it to take approximately (1000/100)^2 times longer to run on data with 1000 elements. This simplifies to 100 times longer, so we can expect the algorithm to take around 1000 seconds (or just over 16 minutes) to execute on data with 1000 elements. For the second part of the question, we need to order the given complexities from smallest to largest. O(n2) is a quadratic complexity, so it grows faster than O(12 + 7n), which is a linear complexity (since the n term dominates). Finally, O(n log(n) + 300 n2 + 1/125 n3) is the largest complexity because it contains a cubic term (1/125 n3) which grows faster than the quadratic term (300 n2), and also a logarithmic term (n log(n)) which grows more slowly than either the quadratic or cubic terms.

To know more about complexity visit :-

https://brainly.com/question/20533216

#SPJ11