The transition of an electron from the ground state to the excited state described by the wavefunction rn,1(r)u1,1(q,f) can be denoted by the term symbol 1P1.
The term symbol notation is used to describe the electronic configuration of an atom or molecule. It consists of three parts: the spin multiplicity (2S+1), the orbital angular momentum (L), and the total angular momentum (J).
In the given excited state, the electron has moved from the 1s orbital to the 2p orbital, which has an angular momentum quantum number of L=1. The spin of the electron is still 1/2, so the spin multiplicity is 2S+1=2.
Therefore, the term symbol for this excited state is 2P1/2, where the J value is obtained by combining the L and S values according to the vector model of angular momentum. However, since the wavefunction provided only specifies the spatial part of the state and not the spin, it is not possible to determine the spin multiplicity, and the term symbol notation cannot be fully applied.
Learn more about electron here:
https://brainly.com/question/28977387
#SPJ11
The reaction between calcium carbonate (CaCO3) and HCl produces calcium chloride (CaCl2), carbon dioxide (CO2), and water (H2O).What happens when the concentration of hydrogen chloride (HCl) molecules is doubled in this reaction?
CaCO3 + 2HCl → CaCl2 + CO2 + H2O
When the hydrogen chloride concentration doubles, the number of collisions between the reactants
, which causes the rate of the forward reaction to
.
When the hydrogen chloride concentration doubles, the number of collisions between the reactants becomes increased, which causes the rate of the forward reaction to be faster.
What is the rate of a reaction?The rate of a reaction is how fast a chemical reaction occurs i.e. the conversion of reactants to products.
The rate of a chemical reaction can be influenced by certain factors including the concentration of reactants.
The more the concentration of a reactant, the more the collision between the reactants and hence, the faster the reaction will proceed.
Therefore, when the hydrogen chloride concentration doubles, the number of collisions between the reactants becomes increased, which causes the rate of the forward reaction to be faster
Learn more about rate of reaction at: https://brainly.com/question/8592296
#SPJ1
Answer:1. increases 2. increases
Explanation:
Got it right on plato!
Which of the following is the best definition of a chemical change?
A. All of these
B. The ability of something to undergo a change or reaction.
C. A change that alters the identity, or chemical composition, of a substance at the atomic level.
D. Something that can be observed or measured without changing the identity of the substance.
Chemical changes are changes that alter the identity or the chemical composition of substances at the atomic level.
What are chemical changes?When a substance changes chemically, the identity of the substance changes.
In other words, chemical changes are changes that occur to substances such that the entire chemical properties of the substances change.
These changes happen at the atomic levels of substances. Sometimes, the changes can also be physical as well.
More on chemical changes can be found here: https://brainly.com/question/23693316
#SPJ1
Which halogen or halogen-containing compound is typically used as a form of topical antisepsis?
The halogen or halogen-containing compound is typically used as a form of topical antisepsis will be "iodophor".
Iodine will be employed as an antiseptic in the manner of a tincture of iodine, essentially an alcoholic solution.
Iodophor would be an iodine-containing solution that also contains a solubilizing agent, like povidone or a surfactant. Iodophor would be a common sanitizer in the dairy but also brewing sectors. Generally, a high molecular weight carrier, commonly a polymer, has been polymerized with iodine.
Therefore, the halogen or halogen-containing compound is typically used as a form of topical antisepsis will be "iodophor".
To know more about antisepsis
https://brainly.com/question/15186144
#SPJ4
Meteorologists use weather balloons to carry weather instruments high into the atmosphere. when it is first released at earth’s surface, a weather balloon typically appears underinflated. what happens to the balloon’s volume and pressure as it rises into the atmosphere? check all that apply. the pressure in the balloon decreases. the pressure in the balloon increases. the volume of the balloon increases. the volume of the balloon decreases.
the pressure in the balloon decreases- True
the pressure in the balloon increases- False
the volume of the balloon increases- True
the volume of the balloon decreases- False
To learn more about weather balloon visit:
https://brainly.com/question/13079902
#SPJ4
The name of Ra3N₂ is
Answer:
Radium Nitride
What is radium?
A radioactive element is radium. See what "radioactive" actually means.
Atoms make up the elements. Since most atoms are stable, they do not change over time. However, some of the heaviest atoms disintegrate and transform into different types. "Radioactivity" is the term for this breakdown or disintegration.
Each radioactive element releases rays that decay or disintegrate at a specific pace. There is no known way to speed up or slow this rate. Some changes happen quickly, some take longer, but no matter what, man cannot control the action.
In the case of radium, this decay would continue indefinitely until the radioactive material was ultimately converted to lead. For instance, in 1,590 years, half a gram of radium would transform into atoms with a lower atomic weight. Half of the remaining radium would transform after an additional 1,590 years, and so on until all of it turned into lead.
Attachment #1:
This is a revigator. It is a pot that was created specifically with radium, uranium, and other radioactive materials to contain water. When radioactivity was first discovered in 1912, people thought it was beneficial and "magical," similar to how homeopathic treatments are now. They would store water in it to allow it to absorb radiation, then they would drink the water. In the 1930s, several gadgets were subsequently recalled.
The enigmatic new radioactive elements captivated people's curiosity during the early 1900s. Although this starch didn't actually contain radium, it was given that name because of the rarity and beauty of radium. It was once thought of similarly to how titanium is now.
Madame Curie and her husband, Pierre Curie, made the discovery of radium. They were processing a ton of pitchblende, an ore that contains uranium. Although they were aware that the uranium was emitting invisible rays, they had the impression that there was another another, far more potent chemical present. They initially discovered polonium, another radioactive element, before successfully isolating a minute particle of radium.
The three types of rays that radium emits are alpha, beta, and gamma rays. Helium gas contains swiftly moving particles called alpha rays. In beta rays, the electrons move quickly. Gamma rays are similar to X-rays but typically more invasive. Every time one of these rays is emitted, its parent atom transforms into a different element. "Atomic transmutation" is the term for this transformation.
Hope this helps!
Cheers
>> ROR
A first-order reaction is 81omplete in 264s. A. What is the half-life for this reaction? b. How long will it take for the reaction to reach 95ompletion?
A first-order reaction is 81omplete in 264s.The half-life for this reaction (i) t 1/2 = =3.465×10 −3 s.to reach 95% Completion = 285 s.
To measure reaction rates, chemists initiate the reaction, measure the concentration of the reactant or product at different times as the reaction progresses,
For a 0-order response, the mathematical expression that may be employed to determine the half of life is: t1/2 = [R]0/2k. For a first-order reaction, the half of-existence is given by: t1/2 = zero.693/ok. For a 2d-order response, the method for the half-life of the response is: 1/okay[R]0
The 1/2-life of a response (t1/2), is the quantity of time needed for a reactant concentration to lower via half of compared to its initial awareness. Its software is used in chemistry and medicine to are expecting the awareness of a substance over time
Half of the lifestyles is the time required for exactly 1/2 of the entities to decay 50%.
Learn more about first-order reaction here:- https://brainly.com/question/518682
#SPJ4
a sodium hydroxide solution is 19 M. What will the strength of the solution formed if 25 ml of this NaOH solutio nis diluted to 5.0 Liters
the strength of the solution formed is 3.8.
What is the strength of the solution?The amount of solute dissolved in grammes per litre of the solution is used to determine the solution's strength. It stands for the solution's potency or concentration. It uses grammes per litre of expression.
Concentration of NaOH = 19 M
Initial volume of NaOH = 25 mL= 0.025 L
Moles of NaOH = 19*0.025
= 0.475 moles
Final volume of NaOH solution = 5 L
Final concentration = 0.475/5
= 0.095 M
so, the strength is 19/5
= 3.8
to know more about strength of the solution go to - https://brainly.com/question/15848974
#SPJ4
Calculate the concentration of a solution if 15 g of salt is added to 170 g of water.
Considering the definition of percentage by mass, the concentration of a solution if 15 g of salt is added to 170 g of water is 8.108 %.
Percentage by massThe percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.
In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.
The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:
[tex]percentage by mass=\frac{mass of solute}{mass of solution}x100[/tex]
Concentration of the solutionIn this case, you know:
mass of solute= 15 gmass of water= 170 gmass of solution= mass of solute + mass of water= 15 + 170 g= 185 gReplacing in the definition of percentage by mass:
[tex]percentage by mass=\frac{15 grams}{185 grams}x100[/tex]
Solving:
percent by mass= 8.108 %
Finally, the concentration of a solution if 15 g of salt is added to 170 g of water is 8.108 %.
Learn more about percentage by mass:
brainly.com/question/19168984
brainly.com/question/18646836
#SPJ1
Oxygen gas generated in the thermal decomposition of potassium chlorate is collected over water. The volume of gas collected is 0.128 L, at a temperature of 297K and a pressure of 762 mm Hg. The vapour pressure of H2O at 297K is 22.4 torr. What is the mass of oxygen collected?
The mass of oxygen collected from the thermal decomposition of potassium chlorate at a temperature of 297 K and 762 mmHg is 0.16 g
How to determine the mole of oxygen producedWe'll begin by obtaining the number of mole of oxygen gas produced from the reaction. This can be obtained by using the ideal gas equation as illustrated below:
Volume (V) = 0.128 L Temperature (T) = 297 KPressure (P) = 762 – 22.4 = 739.6 mmHgGas constant (R) = 62.363 mmHg.L/Kmol Number of mole (n) =?PV = nRT
739.6 × 0.128 = n × 62.363 × 297
Divide both sides by 62.363 × 297
n = (739.6 × 0.128) / (62.363 × 297)
n = 0.0051 mole
Thus, the number of mole of oxygen gas produced is 0.0051 mole
How to determine the mass of oxygen collectedHaven obtain the number of mole of oxygen gas produced, we can determine the mass of the oxygen produced as follow:'
Mole = 0.0051 moleMolar mass of oxygen gas = 32 g/moleMass of oxygen =?Mole = mass / molar mass
0.0051 = mass of oxygen / 32
Cross multiply
Mass of oxygen = 0.0051 × 32
Mass of oxygen = 0.16 g
Thus, we can conclude that the mass of oxygen gas collected is 0.16 g
Learn more about ideal gas equation:
https://brainly.com/question/4147359
#SPJ1
In the reclassify transactions screen, which 3 elements of a transaction can be reclassified?
The 3 elements of a transaction that can be reclassified are:
Account, Location ClassOn an account transaction screen, one can see there are different elements that exist and some of them are:
invoices, sales receipts, checks, or bills, etcWhat is a Transaction?This refers to the proof that exists that a person has bought a good or service and can also stand as an agreement.
Hence, we can see that On an account transaction screen, one can see there are different elements that exist and some of them are:
invoices, sales receipts, checks, or bills, etcHowever, there are only 3 elements that can be reclassified on the reclassify transactions screen and they are:
Account, Location ClassRead more about transactions here:
https://brainly.com/question/24835236
#SPJ1
A balloon filled with air has a volume of 4.24 liters at 23.00°c. if the balloon is cooled at constant pressure to 5.00°c, what is its new volume? the balloon’s volume at 5°c is liters.
The new volume if the balloon is cooled at constant pressure is 3.98 L.
Charles's law, states that the volume occupied by a fixed amount of gas is directly proportional to its absolute temperature if the pressure remains constant.
The new volume is calculated using the Charles law formula
V₁ / T₁ = V₂ / T₂
where,
V₁ = The initial volume of air = 4.24 l
T₁ = 23.00 °C into kelvin = 23 +273 =296 K
T₂ = 5.00 °C into kelvin = 5.00 + 273 = 278 K
V₂ = ?
By making V₂ subject the subject of the formula by multiplying both sides by T₂
V₂ = ( V₁ × T₂ ) / T₁
V₂ = (4.24 L × 278 K) / 296 k
= 3.98 L
Therefore, the new volume, if the balloon is cooled at constant pressure, is 3.98 L.
An air-filled balloon will contract when chilled and expand when heated. This occurs because the gas that makes up the air within the balloon expands when it is warm and contracts when it is cool.
Learn more about Charles law here:
https://brainly.com/question/14842720
#SPJ4
Answer: at 5 its ... 3.98
Explanation:
How many molecules of zinc oxide are there in a 2 kg (2,000 g) sample?
Answer:
1.48 x 10²⁵ molecules ZnO
Explanation:
To find the amount of molecules, you need to (1) convert grams to moles (via molar mass) and then (2) convert moles to molecules (via Avogadro's Number). It is important to arrange the conversions/ratios in a way that allows for the cancellation of units.
Molar Mass (ZnO): 65.380 g/mol + 15.998 g/mol
Molar Mass (ZnO): 81.378 g/mol
Avogadro's Number:
6.022 x 10²³ molecules = 1 mole
2,000 g ZnO 1 mole 6.022 x 10²³ molecules
--------------------- x ----------------- x --------------------------------------- =
81.378 g 1 mole
= 1.48 x 10²⁵ molecules ZnO
what discovery was found by Nels Bohr model of atom ?
Answer:
What was Niels Bohr's most important discovery? Niels Bohr proposed a model of the atom in which the electron was able to occupy only certain orbits around the nucleus. This atomic model was the first to use quantum theory, in that the electrons were limited to specific orbits around the nucleus.
Explanation:
Subjects Of Study: atomic model
HELP PLS PLS PLS ILL MARK U BRAINLIEST
Answer:
2 FeCl3 → 2 Fe + 3 Cl2
Explanation:
2 Fe and 6 Cl on the reactants side, and 2 Fe and 6 Cl on the products side.
What substitute for fossil fuel depletion has been heralded as the solution to the nation’s energy problems??
The renewable energies are the substitute for fossil fuel depletion has been heralded as the solution to the nation’s energy problems.
The benefits of renewable energies to the environment and economic are as follows.
The renewable energies produces less global warming.It also reliable and resilience.The renewable energies helps to improve public health.Through renewable energies ,jobs and other economic gets benefits.The prices of renewable energies is stable.The renewable energies is inexhaustible energy.learn about renewable energies
https://brainly.com/question/17373437
#SPJ4
If a 4L solution is 80% concentrated lime juice and 20% water, how much 30% concentrated lime juice must be added so that the concentration of the resulting solution is 50% concentrated lime juice
The volume of 30% concentrated lime juice that must be added to a 4L solution of 80% concentrated lime juice and 20% water is 6 L.
What are mixtures?Mixtures are substances which are formed when two or more substances are physically combined together.
Mixtures are heterogenous in nature and the constituents can be easily separated.
The volume of 30% concentrated lime juice that must be added to a 4L solution of 80% concentrated lime juice and 20% water, so that the concentration of the resulting solution is 50% concentrated lime juice is determined as follows:
Let the volume of 30% lime juice required be x;
total volume of lime juice = 0.3x
For 80% lime juice, volume of lime juice = 0.8 * 4 = 3.2 L
New volume of lime juice = 4 + x
New amount of lime juice added = 3.2 + 0.3x
Also, new amount of lime juice = 0.5 * ( 4 + x)
3.2 + 0.3x = 0.5 * ( 4 + x)
0.2x = 1.2
x = 6 L
In conclusion, the volume to be added is obtained from the percent concentration.
Learn more about percent concentration at: https://brainly.com/question/19379932
#SPJ1
Calculate and record the expected mass of benzoic acid required to react with 20.00 mL of a 0.100 M sodium hydroxide solution. Record the mass of benzoic acid using three significant digits to reference later.
The mass of benzoic acid is 0.244 g.
Here use the concept of molarity.
What is molarity?The amount of a substance in a specific volume of solution is known as its molarity (M). The moles of a solute per liter of a solution is known as molarity.
Molarity = no. of moles/volume (in L)
Calculation:Given,
Molarity, M = 0.100 M
Volume, V = 20.00 mL = 20.0 × 10⁻³
To calculate,
Mass of benzoic acid C₇H₆O₂ =?
We know that,
Molecular mass of benzoic acid, C₇H₆O₂ = 122
No. of moles = weight/ molecular mass
The formula is modified as,
Molarity = weight of cholesterol/ (molecular mass) (Volume)
Put the values in the formula,
0.100 = Mass of benzoic acid/ (122) (20 × 10⁻³)
Mass of benzoic acid = 0.100 (122)(20 × 10⁻³)
= 244 × 10⁻³
= 0.244 g
Hence, the mass of benzoic acid is 0.244 g.
Learn more about molarity here:
brainly.com/question/13386686
#SPJ4
Which of the following statements about the normal operation of nuclear fission reactors is accurate?
Select one:
a. They release large amounts of chemical pollutants into the air.
b. A small amount of fuel produces a large amount of energy.
c. The nuclear waste is quickly and safely disposed of at the reactor site.
d. The hot water surrounding the reactor core can be used to provide hot water for communities in the area.
Answer:
Explanation:
b
Describe the difference between radiopaque and radiolucent. Radiopaque refers to a _______________ or light appearance of a structure on a processed radiograph. Radiolucent refers to a _______________ appearance of a structure on a processed radiograph.
Radiopaque refers to a White or light appearance of a structure on a processed radiograph. Radiolucent refers to a Dark appearance of a structure on a processed radiograph.
What makes something radiodense as opposed to radiolucent?Materials that prevent electromagnetic radiation from passing through are referred to as radiodense or radiopaque, whereas materials that permit radiation to pass more readily are referred to as radiolucent. In contrast to radiolucent volumes, which appear significantly darker on radiographs, radiopaque volumes of material seem white.
What exactly does radiodensity mean?It is the relative inability of radio waves and X-rays to flow through a certain substance. Radiodensity (or radiopacity) is opacity to the radio wave and X-ray portion of the electromagnetic spectrum.
Learn more about radiopaque and radiolucent here:-
https://brainly.com/question/13110181
#SPJ4
Which of the following is an oxidation-reduction reaction?
SO2(g) + H2O(l) Right arrow. H2SO3(aq)
CaCO3(s) Right arrow. CaO(s) + CO2(g)
Ca(OH)2(s) + H2CO3(l) Right arrow. CaCO3(aq) + 2H2O(l)
C6H12O6(s) + 6O2(g) Right arrow. 6CO2(g) + 6H2O(l)
B. The chemical reaction that represents oxidation - reduction reaction is CaCO3(s) → CaO(s) + CO2(g).
Oxidation reduction reaction
In oxidation reduction reaction, the oxidizing agent is reduced while reducing agent is oxidized.
In the chemical equation below;CaCO3(s) → CaO(s) + CO2(g)
Calcium (ca) is oxidized calcium (II) ion while the carbon (IV) oxide is reduced carbon (IV) oxide.
Thus, the chemical reaction that represents oxidation - reduction reaction is CaCO3(s) → CaO(s) + CO2(g).
Learn more about oxidation reduction reaction here: https://brainly.com/question/4222605
#SPJ1
Answer: The answer is B
Explanation: on edge
What was the purpose of varying the concentrations of sodium alginate and CaCl2?
To determine how stable the beads are as well ensue the securing of maximum enzymes as well as the retention of their activity.
What is concentration?The concentration of a substance simply means the amount of the substance in solution. Thus we are looking at the amounts of sodium alginate and CaCl2 in the system.
The concentrations of the sodium alginate and CaCl2 is varied in order to determine how stable the beads are as well ensue the securing of maximum enzymes as well as the retention of their activity.
Learn more about enzymes:https://brainly.com/question/14953274
#SPJ1
When a water heater thermostat is set at 140 ° f or higher, a ______ should be installed to cool the water.
Tempering Valve should be installed to cool the water.
A tempering valve is also called an anti-scald valve.
The thermostat controls the temperature inside the tank between 120F to 140F.
A thermostat is just a switch that is actuated by temperature. The thermostat will activates one of the elements in response to a "request for heat" when it detects a water temperature below its predetermined point.
At 140 degrees F temperature water can cause a burn to the skin in five seconds.
The Tempering valve is the mixing chamber, where cold water is mixed with hot water.
It functions as a mixing device, mixing hot and cold water to generate the proper water temperature that is emitted from a certain outlet.
For a detailed study about the thermostat refer given link https://brainly.com/question/8312329.
#SPJ1.
1. A gas occupies 0.60 m3 at a 5.0 atm. If the temperature of the gas remains the same and the pressure decreases to 2.5 atm, what would be the new volume occupied by the gas
The new volume occupied by the gas is 1.2 m³.
Here Boyle's law is applied.
What is Boyle's law?At a constant temperature, the volume of a gas is inversely proportional to the pressure exerted on it.
PV = constant
where,
P = Pressure applied
V = Volume of the gas
Calculation:Given,
P₁ = 5.0 atm
V₁ = 0.60 m³
P₂ = 2.5 atm
To find
V₂ =?
As PV = constant
Therefore,
P₁ V₁ = P₂ V₂
5 × 0.6 = 2.5 × V₂
3 = 2.5 × V₂
V₂ = 3/2.5
V₂ = 1.2 m³
Hence, the new volume occupied by the gas is 1.2 m³.
Learn more about Boyle's law here:
https://brainly.com/question/1437490
#SPJ4
What is the frequency of an
orange light with a wavelength of 483 nm?
[?] × 10²] Hz
Please explain how to solve as well I’m very confused.
Answer:
6.21 x 10¹⁴ Hz
Explanation:
The frequency can be found using the following equation:
λ = c / f
In this equation,
-----> λ = wavelength (m)
-----> c = speed of light (3.0 x 10⁸ m/s)
-----> f = frequency (Hz)
After converting the wavelength from nm to m, you can plug the given values into the equation and simplify to find the frequency.
483 nm 1 m
--------------- x --------------------- = 4.83 x 10⁻⁷ m
1 x 10⁹ nm
λ = c / f <----- Given equation
4.83 x 10⁻⁷ m = 3.0 x 10⁸ m/s / f <----- Insert values
(4.83 x 10⁻⁷ m) x f = 3.0 x 10⁸ m/s <----- Multiply both sides by f
f = 6.21 x 10¹⁴ Hz <----- Divide both sides by 4.83 x 10⁻⁷
Noble gases have __ values of ionization energy due to their complete outermost shells
Answer:
high
Explanation:
The energy needed to ionize a neutral atom is known as ionization energy. An atom must have one or more electrons removed from its valence shell in order to get ionized and become a cation. Alternately, you must produce an anion by adding one or more electrons to the valence shell. The energy needed for ionization will be lower the fewer electrons are supplied or withdrawn. As a result, atoms having an incomplete valence shell have a tendency to ionize more quickly and with less energy. However, entire valence shell atoms will require a large amount of ionization energy. As a result, noble gases need significant energy to ionize since they contain a full valence shell, are extremely stable, and do not tend to ionize easily.
Phosphate buffer solution is purchased as a(n) 10x stock solution. The solution is more concentrated than the working stock. If tasked with making 941 mL of a 1x solution of PBS, how many mL of the stock solution would be needed
94.1 mL of 10x PBS should be needed
Given:
Phosphate buffer solution = 10x
Volume of 1x solution of PBS = 941 mL
To Find:
Volume of stock solution
Solution:
A buffer solution is an aqueous solution consisting of a mixture of a weak acid and its conjugate base, or vice versa. Its pH changes very little when a small amount of strong acid or base is added to it.
using the formula
M1 x V1 = M2 x V2
(10x)* V1 = 1x* 941
V1 = 94.1 ml
So, 94.1 mL of 10x PBS should be needed
Learn more about Buffer solution here:
https://brainly.com/question/22390063
#SPJ4
Calculate the freezing point depression for 1 kilogram of sodium chloride (NaCl) in 5 kilograms of
water. The Ky of water is -1.86 °C/m.
[tex]\\ \rm\dashrightarrow \Delta T_f=ik_fm[/tex]
m is molalityMoles of NaCl
1000/2343.4molMolality
43.4/58.68[tex]\\ \rm\dashrightarrow \Delta T_f=i(-1.86)(8.68)[/tex]
[tex]\\ \rm\dashrightarrow \Delta T_f=-16.14i[/tex]
i is vant Hoff factor
For NaCl vant Hoff factor is 2( Actually 1.9)
[tex]\\ \rm\dashrightarrow \Delta T_f=-16.14(2)=-32.28°C[/tex]
Moles of NaCl
[tex]\\ \tt{:}\dashrightarrow \dfrac{1000g}{23g/mol}[/tex]
[tex]\\ \tt{:}\dashrightarrow 43.4mol[/tex]
Find Molality
[tex]\boxed{\sf Molality=\dfrac{Moles\:of\:solute}{Volume \:of\: solution\:in\:kg}}[/tex]
Volume of solution=1kg+5kg=6kg[tex]\\ \tt{:}\dashrightarrow m=\dfrac{43.4}{6}=7.2m[/tex]
Vant Hoff factor
[tex]\\ \tt{:}\dashrightarrow NaCl\longrightarrow Na^++Cl^-[/tex]
i=2Freezing point depression
[tex]\\ \tt{:}\dashrightarrow \Delta T_f=iK_fm[/tex]
[tex]\\ \tt{:}\dashrightarrow \Delta T_f=2(-1.86)(7.2)[/tex]
[tex]\\ \tt{:}\dashrightarrow \Delta T_f=-26.7°C[/tex]
How many carbon monoxide molecules are in 0.75 moles of carbon monoxide?
Answer:
four 0.5 times 10 to the 23rd Adams of Neptune
Explanation:
Answer:
0.75 ( 6.02 × 10²³) = 4.515 x 10²³
Explanation:
0.75 ( 6.02 × 10²³) = 4.515 x 10²³
What is the order in which electrons start filling the orbitals?
a. 1s 2s 2p 3s 3p 4s 3d 4p
b. 1s 2s 2p 3s 3p 3d 4s 4p
c. 1s 2s 2p 3s 4s 3p 3d 4p
d. 1s 2s 2p 3s 4s 4p 3p 3d
e. 1s 2s 2p 3s 4s 3p 4p 3d
a. 1s 2s 2p 3s 3p 4s 3d 4p is the correct option.
This gives the following order to fill the orbit: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p, (8s, 5g, 6f, 7d, 8p, and 9s)
Aufbau's principle states that electrons fill low-energy atomic orbitals before they fill high-energy atomic orbitals. .. By following this rule, you can predict the electron configuration of an atom or ion.
There may be two electrons at the maximum of one orbit. Since the s subplane has only one orbit, it can hold up to two electrons. The p subplane has three orbitals, so it can hold up to six electrons. The d-subplane has five orbitals, so it can hold up to 10 electrons.
Learn more about electrons here:https://brainly.com/question/11316046
#SPJ4
How many moles of H2O are in 64.0 g of H2O
Answer:
Explanation:
stoichiometry of C₂H₂ to H₂O is 2:2.
Number of moles of C₂H₂ = molar mass of C₂H₂
Since the molar mass of C₂H₂ is 26 g/mol.
Number of C₂H₂ moles reacted = 64.0 g / 26 g/mol = 2.46 mol.
according to a molar ratio of 2:2.
the number of H₂O moles formed = a number of C₂H₂ moles reacted.
Therefore the number of H₂O moles produced = 2.46 mol