an electric charge with charge q is placed in an electric field with field magnitude e. due to the field, the charge experiences a force f. if the charge is doubled and the field tripled, how much force is then exerted on the charge?

The takes a motor with an output of 8.0 W approximately 3.632 minutes to lift a 2.0 kg object 88 cm.

The time it takes a motor with an output of 8.0 W to lift a 2.0 kg object 88 cm can be calculated using the equation for work, which is given by:

W = F * d

where W is the work done, F is the force required to lift the object, and d is the distance the object is lifted. The force required to lift the object can be calculated using the equation for weight, which is given by:

F = m * g

where m is the mass of the object and g is the acceleration due to gravity (9.8 m/s^2).

Substituting the values for m and g into the equation for weight, we get:

F = 2.0 kg * 9.8 m/s^2 = 19.6 N

Now that we know the force required to lift the object, we can substitute this value into the equation for work to calculate the work done:

W = F * d = 19.6 N * 88 cm = 1717.28 J

Finally, we can use the equation for power, which is given by:

P = W / t

where P is the power of the motor and t is the time it takes to lift the object. We know the power of the motor (8.0 W) and the work done (1717.28 J), so we can calculate the time it takes to lift the object:

t = W / P = 1717.28 J / 8.0 W = 215.91 seconds = 3.632 minutes

to know more about motor refer here

https://brainly.com/question/8942733#

#SPJ11

Faith, respect, and effective communication are the three tips to start a healthy dating relationship mentioned in the article.

What are three recommendations for beginning a happy relationship?

Trust, respect, effective communication, adaptability, a common interest, time apart, different connections (with family and friends), and appreciation. Each partner needs to have confidence in the other. Never should your partner belittle you, test you, or say anything disparaging about you.

What are good relationships?

Healthy relationships involve open communication, honesty, trust, and respect between partners as well as work and compromise from both parties. There is no imbalance of power. Partners are free to make decisions together, respect each other's independence, and take individual actions without worrying about the consequences.

Know more about relationships- brainly.com/question/13162424

#SPJ1

The following data can be converted to the engineering notation as the following. (a) 0.045 W is 45 mW. (b) 2000 pJ is 2nJ. (c) 0.1 ns is 100 pS (d) 39,212 as is 39.212 fs (e) 3 \Omega3Ω is 3Ω (f) 18,000 m is 18 km (g) 2,500,000,000,000 bits is 2.5 terabits (h)  0^{15} \text { atoms } / \mathrm{cm}^{3}10 15atoms /cm 3 is [tex]10^{21} \frac{atoms}{m^{3} }[/tex].

Engineering notation is the representation of expressing the numbers that are too big or too small and are represented in the decimal form times 10 raise to the power.  It is similar to the scientific notation but in engineering notation, the powers of ten are always multiples of 3.

Using scientific notation, one can express extremely big or extremely small values. When a number between 1 and 100 is used, it is written in scientific notation.

Learn more about engineering notation:

brainly.com/question/4953722

#SPJ4

Work done or energy used to lift the mass is the product of the force applied on it and the displacement. The energy used for a force of 1176 N here is 9643.2 J.

Work done is a vector quantity measuring how effectively the force make a displacement. Thus, it is the product of force and displacement. Work done by body is equal to the energy used by it.

Here the force that has to be applied to lift the mass is equal to its weight

F = mg

m = 120 kg

g = 9.8 m/s²

then F = 120 × 9.8 m/s² = 1176 N.

Displacement of the couch = 8.2 m.

then work done = F. ds

W = 8.2 m ×1176 N = 9643 J.

Therefore, the energy gained by the coach is equal to the work done by the person that is 9643 J.

Find more on work done :

https://brainly.com/question/30073908

#SPJ1

The total momentum during the collison is conserved. Using this concept, the final velocity of the 400 kg ball is 22m/s.

Momentum of an object is the product of its mass and velocity. During collision between two bodies the total initial momentum is equal to the total final momentum.

Momentum of ball of  400 kg with 30 m/s = 400 × 30 = 12000 kg m/s.

momentum of ball of 200 kg with 10 m/s velocity = 200 × 10 = 2000 kg m/s.

total initial momentum  = 2000 + 12000 kg m/s = 14000 kg m/s.

Now, final momentum of 200 kg ball with 26 m/s =  200 × 26 = 5200 kg m/s.

total final momentum = total initial momentum = 14000 kg m/s.

thus 5200 kg m/s + (400 kg × v m/s) = 14000 kg m/s

v = (14000 - 5200 kg m/s )/400 kg  = 22 m/s.

Therefore, the final velocity of 400 kg ball is 22 m/s.

Find more on momentum:

https://brainly.com/question/24301052

#SPJ1

A thermometer is included in the construction of a calorimeter to measure the temperature change that occurs during a chemical reaction.

A calorimeter is a device used to measure the heat transfer in a chemical reaction. This measurement is important because it allows scientists to determine the energy change that occurs during a reaction. The energy change can then be used to determine the energy transfer between the system and the surroundings, which is useful in studying thermodynamics.

A thermometer is included in the construction of a calorimeter to measure the temperature change that occurs during a chemical reaction. By measuring the initial and final temperature of the reaction, scientists can determine the energy transfer that has taken place. This is because energy transfer is directly proportional to the change in temperature.

In other words, as energy is transferred from one substance to another, the temperature of the substances will change. By measuring the temperature change, scientists can determine the energy transfer that has taken place. This information is then used to calculate the enthalpy change for the reaction, which is a measure of the energy transfer between the system and the surroundings.

To know more about thermometer here:

https://brainly.com/question/24189042#

#SPJ11

True. Checking the weights of a sample of bottles to decide if a process that fills bottles with soda is functioning properly is an example of inferential statistics.

Inferential statistics is a branch of statistics that involves using a sample of data to make inferences or conclusions about a larger population. In this case, the sample of bottles is used to make inferences about the entire process of filling bottles with soda, with the goal of determining if the process is functioning properly. This type of statistical analysis is used to make informed decisions and predictions about a population based on limited information, making it an important tool in many industries and fields.

Learn more about inferential statistics:

https://brainly.com/question/11215148

#SPJ4

The highest volume of water is displaced by the lead block and aluminum, which also has the largest volume and the strongest buoyant force.

Here are a few real-world instances of the buoyant force. A ship floating in the ocean, a boat moving down a river, an iceberg floating in the water, a person wearing a life jacket floating in the water, a helium balloon rising in the air, etc. The density has a direct relationship with the buoyant force.

An object feels a buoyant force because the bottom is deeper in the liquid than the top, which results in a stronger upward pressure. As a result, any item submerged in a liquid experiences buoyancy.

To know more about buoyant force visit:-

https://brainly.com/question/21990136

#SPJ4

The angle at which William Tell must aim the arrow is approximately 32.2 degrees.

To find the angle at which William Tell must aim the arrow to hit the apple, you need to use the equation of motion for a projectile under constant gravitational acceleration.

Let's call the angle at which William aims the arrow "θ". Then, the horizontal velocity of the arrow (vx) can be found using vx = 35 m/s x cos(θ). The vertical velocity of the arrow (vy) can be found using vy = 35 m/s x sin(θ).

Using the kinematic equation for vertical motion under constant acceleration, we can find the time it takes for the arrow to reach the height of the apple:

vy = v0 + a x t

0 = 35 m/s x sin(θ) - 9.8 m/s² x t

t = (35 m/s x sin(θ)) / 9.8 m/s²

Next, use the horizontal velocity of the arrow and the time found above to find the horizontal distance it travels:

x = vx x t

x = 35 m/s x cos(θ) x (35 m/s x sin(θ)) / 9.8 m/s²

Finally, set x equal to the distance to the apple (27 m) and solve for θ using trigonometry:

27 m = 35 m/s x cos(θ) x (35 m/s x sin(θ)) / 9.8 m/s²

cos(θ) = sqrt(9.8 m/s² x 27 m / (35 m/s)²)

θ = arc cos(sqrt(9.8 m/s² x 27 m / (35 m/s)²))

The angle at which William Tell must aim the arrow is approximately 32.2 degrees.

Learn more about projectile angle  at : https://brainly.com/question/12945459

#SPJ4

The value of the magnetic field after a capacitor is fully charged will be zero. This is because once the capacitor is fully charged and the electric field is no longer changing, the magnetic field will disappear.

When a capacitor is fully charged, the value of the magnetic field will be zero. This is because the electric field stops changing once the capacitor is fully charged, which in turn means that the magnetic field associated with it will no longer exist.

This can be explained by the principle that magnetic fields are generated due to the changes in electric fields, which no longer exist in the case of a fully charged capacitor. Thus, it is important to note that the value of the magnetic field will be zero once the capacitor is fully charged.

To know more about capacitor, click here.

https://brainly.com/question/17176550

#SPJ4

The 299,792,458 m/s is the speed of light with a frequency of 2.4 x 1013 1/s.

What is speed ?

The rate of a directionally changing object's location. The SI unit of speed is created by combining the fundamental units of length and time. Meters per second (m/s) is the unit of speed in the metric system.

What is frequency?

The frequency is expressed in Hertz. A sound wave's frequency is determined by how many vibrations it produces ( f ). Another way to think of frequency is as the quantity of waves that pass a specific spot in a second.

Therefore,  299,792,458 m/s is the speed of light with a frequency of 2.4 x 1013 1/s.

Learn more about speed from the given link.

https://brainly.com/question/27888149

#SPJ4

The nuclear power plant needs 95.217 kg of nuclear fuel or uranium 235 is used during the whole year to operate.

Here the nuclear power plant produces 1000MW of energy.

So, for one year the total energy that can be produced = 1000× 365× 24 = 8760000 MWh

Since the reactor has a 75% capacity, energy produced = 8760000×75/100 = 6750000 MWh. = 6.75×10⁹ kWh

Converting to joules = 6.75× 10⁹× 3.6× 10⁶ = 2.365×10¹⁶

Thermal efficiency is 33%. So, 2.365×10¹⁶ × 0.33

                                                 = 7.80×10¹⁵ J.

To find out the mass, we need to know the number of atoms. So converting the energy to meV.

7.80× 10¹⁵ × 6.242× 10¹² = 4.87 ×10²⁸ meV

From one atom 200 meV is produced.

So, number of atoms =  4.87 ×10²⁸/200 = 2.44×10²⁶ atoms.

No of moles = number of atoms/ Avogadro's number = 2.44×10²⁶/ 6.022 ×10²³ = 405.18 moles.

Mass = Number of moles× molar mass

        =405.18 × 235 = 95217.52 g = 95.217 Kg

So the amount of uranium 235 required by the nuclear reactor for an year is 95.217 g.

For more information regarding nuclear power plant, kindly refer

https://brainly.com/question/2285245

#SPJ4

The plate separation of such a capacitor is 1.186 nm or 11.86 Angstroms.

The question is not complete. A similar question is in the attachment. The formula for the capacitance of a parallel plate capacitor

C = ε₀ ×  A ÷ d

C = ε₀ ×  A ÷ d

C × d = ε₀ ×  A

91 × 10⁻¹⁵ × d = 8.85 × 10⁻¹² × 1.22 × 10⁻¹¹

91 × 10⁻¹⁵ × d = 10.797 × 10⁻²³

d = 10.797 × 10⁻²³ ÷ 91 × 10⁻¹⁵

d = 0.1186 × 10⁻⁸

d = 1.186 × 10⁻⁹

d = 1.186 nm

d = 11.86 × 10⁻¹⁰ m

d = 11.86 Angstroms

Learn more about capacitance here: https://brainly.com/question/27258294

#SPJ4

We can use a log and arock or something hard to make a pivot and place on it the log to build a jump.

There are several exercises that can be done to increase the height of the jump.

The exercise to train the jump is by jumping jack. Jumping jacks is a type of exercise  plyometric that can help you jump higher by building lower body strength. This exercise can also increase the heart rate.

Jumping jacks are useful for improving performance in activities that require you to move quickly in different directions.

Learn more about build a jump at https://brainly.com/question/3047193.

#SPJ4

(x-h)^2 + (y-k)^2 + (z-l)^2 = r^2 is the equation for sphere.

Every point on the surface of a sphere, which has three dimensions, is equally distant from the object's centre. It has a symmetrical, circular shape, and all points that are a certain distance from the centre define the surface of the object. Numerous commonplace items, including balls, planets, and even fruits, include spheres.

The equation for a sphere in physics is given by:

(x - h)2 + (y - k)2 + (z - l)2 = r2,

where (h, k, and l) stand in for the sphere's centre and r is its radius. The distance between any point on the surface of the sphere and its centre is calculated using this equation.

The sphere is perfectly symmetrical in all directions, so if you cut it in half, both pieces would be identical.

One of the most fundamental shapes in physics, the sphere may be found in many fields including fluid mechanics, optics, and thermodynamics. Other forms like ellipses and toroids can also be constructed using the sphere as their fundamental building block.

To know more about sphere, visit:

https://brainly.com/question/11374994

#SPJ4

[tex]a) 4.9X 10^{-7} Kg\\ b) 7.09X10^{-11} C[/tex]

We know that (from Newton’s third law) the magnitude of the force on the second particle due to the first particle [tex]F_{12}[/tex] equals the magnitude of the force on the first particle due to the second particle [tex]F_{21}[/tex] , so:

                            [tex]F_{12} = F_{21}[/tex]

Given:

The initial acceleration of the first particle, a1 = 7.0 m/s^2

The initial acceleration of the second particle, a2 = 9.0 m/s^2

Mass of the first particle, m1 = 6.3 * 10^(-7) kg

Separation between the two particles, d = 3.2 * 10^(-3) m

Using Coulomb's law, the force between two charges q1 and q2 is given by:

F = k * |q1 * q2| / d^2

Where k is Coulomb's constant.

Coulomb's law is a fundamental law of electrostatics that describes the interaction between charged particles. It states that the force between two point charges is proportional to the product of the magnitudes of the charges and inversely proportional to the square of the distance between them.

Since the acceleration of a particle is directly proportional to the net force acting on it, we can write:

m1 * a1 = k * |q1^2| / d^2

m2 * a2 = k * |q2^2| / d^2

Dividing the first equation by the second equation, we get:

m1 * a1 / m2 * a2 = q1^2 / q2^2

(m1 * a1) / (m2 * a2) = (q1^2) / (q2^2)

m2 = m1 * (a1 / a2)

Substituting the known values:

m2 = 6.3 * 10^(-7) kg * (7.0 m/s^2 / 9.0 m/s^2)

m2 = 4.9 * 10^(-7) kg

The mass of the second particle is 4.9 * 10^(-7) kg.

To find the magnitude of the charge of each particle, we can rearrange the first equation:

q1^2 = m1 * a1 * d^2 / k

Substituting the known values:

q1^2 = 6.3 * 10^(-7) kg * 7.0 m/s^2 * (3.2 * 10^(-3) m)^2 / k

q1 = sqrt(6.3 * 10^(-7) kg * 7.0 m/s^2 * (3.2 * 10^(-3) m)^2 / k

=> q1 = q2 = 7.09 × 10^-11 C

Therefore, the correct answers are:

[tex]a) 4.9X 10^{-7} Kg\\ b) 7.09X10^{-11} C[/tex]

To know more about Coulomb's law refer to:

brainly.com/question/506926

#SPJ4

The required velocity of a particle travelling in a straight line with the given acceleration function at s = 10 m is calculated to be 15.52 m/s.

At, s = 0, the velocity of the particle is v = 9 m/s.

Now, let us find the particle's velocity at s = 10 m,

Consider the acceleration function, a = (10 − 0.2 s)

Since, a = v dv/ds, so the above equation can be written as,

v dv/ds = (10 − 0.2 s)

Integrate the above function using the variable separable approach,

9 to v ∫ v dv = 0 to 10 ∫ (10 − 0.2 s) ds

9 to v (v²/2) = 0 to 10 (10 s - 0.2 s²)

v²/2 - 9²/2 = 10× 10 - (0.2 × 10²)

v = 15.52 m/s

Thus, the velocity as s = 10 m, is 15.52 m/s.

The given question is incomplete. The complete question is 'Determine the velocity of the particle when s = 10 m if v = 9 m/s, at s = 0.'

To know more about velocity:

https://brainly.com/question/28859378

#SPJ4

We can conclude that the force exerted on each wand is repulsive, as the charges are both of the same sign.

Magnitude is a measure of the size of a physical quantity usually explain it as a numerical value of the octane used to compare the relative size of different object or phenomena it is typically used to measure the intensity soldiers trained the something magnitude is a concept applicable how many different physical quantities of the light sound and its speed and force.

The magnitude of the force exerted by each wand can be calculated using Coulomb’s Law, which states that the force is equal to the product of the two charges, divided by the square of the distance between them. Since we know the charge on the white-faced wand, we can calculate the force:

F = (1.38 x 10-10 C)2 / (1.35 cm x 10-2 m)2

F = 0.0012 N

The force between the two wands is repulsive, as the charges are both of the same sign.

Assuming that the wands are not charged before they are rubbed together and that the distance between them remains constant, we can conclude that the force exerted on each wand is repulsive, as the charges are both of the same sign.

To know more about magnitude click-
https://brainly.com/question/24256733
#SPJ4

Frictionless ramp: The acceleration of a box sliding down a frictionless ramp inclined at 30 degrees can be determined using the equation for gravitational acceleration:

a = g * sin(θ)

where a is the acceleration, g is the acceleration due to gravity (9.8 m/s^2), and θ is the angle of the ramp (30 degrees).

a = 9.8 * sin(30) = 4.9 m/s^2

Ramp with friction: If the coefficient of friction between the box and ramp is 0.34, the acceleration can be determined using the equation:

a = g * sin(θ) - μ * g * cos(θ)

where μ is the coefficient of friction.

a = 9.8 * sin(30) - 0.34 * 9.8 * cos(30) = 2.86 m/s^2

So the acceleration of the box sliding down a frictionless ramp inclined at 30 degrees is 4.9 m/s^2, and the acceleration if the coefficient of friction is 0.34 is 2.86 m/s^2.

The weight of the book exerts a force on the table due to gravity, which is exactly balanced by the force of the table on the book. It does matter that the train is moving, because it exerts a force on both the table and the book. Thus, option C is correct.

The rate at which an object's velocity changes over time, or how quickly it changes its velocity, is measured by acceleration. It has both magnitude and direction because it is a vector quantity. In physics, acceleration is typically defined as the change in velocity per unit of time and is expressed in units of metres per second squared (m/s2).

A change in direction, speed, or both can cause acceleration. When an object accelerates, it is said to be experiencing a net force, and the acceleration is inversely correlated with the mass of the object.

To know more about acceleration,  click the link below ;

https://brainly.com/question/605631

#SPJ1

Kinetic energy is not conserved in inelastic collisions because part of the energy is converted into internal energy. If there was an inelastic collision that did not generate any heat, it would still result in a decrease in total kinetic energy, as the internal energy would remain constant.

In an inelastic collision, kinetic energy is not conserved due to the conversion of some of the energy into internal energy. This is the case even if the collision does not produce any heat.

The total kinetic energy still decreases, as the internal energy remains constant. Therefore, in an inelastic collision, part of the kinetic energy is transformed into internal energy, resulting in a decrease in the total kinetic energy of the system.

To know more about kinetic, click here.

https://brainly.com/question/26472013

#SPJ4

The work done is 6000J  

The product of a force's component acting in the displacement's direction and its magnitude is known as the work done by the force. Formula.

The following formula can be used to determine work by multiplying force and distance in the direction of the force. Unit: W = F d.

Given

Output work formula

L*Ld = 680*8 = 5440

Hence the output is 5440J  

Input work  

We know  

the input work formula is  

E*Ed

500*12= 6000J  

Read more about work done here:

https://brainly.com/question/8119756

#SPJ1

The approximate diameter of each cell in the Bacteria Coccus Form slide in Photo 10 is 0.33 micrometers.

The formula to calculate the diameter of an object in the field of view is:

diameter = field of view (FOV) / magnification

First, we need to convert the FOV from millimeters to micrometers:

0.2mm = 200µm

Now, we can use the formula to calculate the diameter:

diameter = 200µm / 600 = 0.33µm

So, the approximate diameter of each cell in the Bacteria Coccus Form slide in Photo 10 is 0.33 micrometers.

Field of View (FOV) is the extent of the observable world that is seen at any given moment. It refers to the extent of the observable environment that is seen by an observer's eye or a camera lens. In the context of visual representation, FOV is often expressed as an angle, which defines the breadth of the visible area. A larger FOV allows more of the environment to be seen at once, while a smaller FOV provides a narrower, more focused view.

To learn more about magnification:

https://brainly.com/question/21370207

#SPJ4

The momentum of the 0.230-kg baseball thrown with a speed of 41 m/s is 9.53 kg m/s. This means that if the ball were to collide with an object with equal and opposite momentum, the combined momentum of the two objects would be zero.

Momentum is a measure of an object's motion and is calculated by multiplying its mass and velocity. In physics, it is an important concept as it is conserved in many cases and helps to predict how objects will interact with each other.

The momentum of an object can be calculated using the formula: p = mv, where p is momentum, m is the mass of the object, and v is its velocity. In this case, the mass of the baseball is 0.230 kg, and its velocity is 41 m/s. Therefore, the momentum of the baseball can be calculated as follows:

p = mv = 0.230 kg * 41 m/s = 9.53 kg m/s.

Here you can learn more about The momentum

https://brainly.com/question/17662202?referrer=searchResults#

#SPJ11

The figure shows the electric field lines for two point charges separated by a small distance. Determine the ratio is [tex]-\frac{1}{3}[/tex].

The directions that a positive test charge would accelerate if it were placed along the electric field lines are indicated by the lines. Because of this, the lines are pointed in the direction of negatively charged source charges rather than positively charged source charges. Each line must have an arrowhead pointing in the proper direction to convey information about the field's direction. Any number of lines could be present in an electric field line pattern. The number of lines is typically regulated because drawing so many lines tends to make the patterns harder to read. Usually, a few lines around a charge are enough to convey the characteristics of the electric field in the area around the lines.

Field lines emerges from positive charge and go inside negative charge.

[tex]\frac{q_{1} }{q_{2} }[/tex]=[tex]\frac{-6}{18} =-\frac{1}{3}[/tex]

Learn more about electric field lines

brainly.com/question/3405913

#SPJ4

Answer:

The brightness of his flashbulbs temporarily saved him by blinding his would-be assassin.

At the moment, there is actually no force that keeps the arrow going forward when it is in mid-flight.

In order to accelerate an object, there must be a net force acting on the object. This is because without any force acting on, an object will be at rest or moving at a constant rate and at one direction.

Acceleration in physics is defined to be the change in velocity over the time elapsed (a = Δv/t). The equation means that an object will be accelerating when it keeps changing velocities.

When the arrow is in mid-flight, it is assumed to be moving at a constant velocity, ignoring the air friction. Therefore, the arrow is not accelerating mid-flight, which means there is no force acting on the arrow at that moment.

Learn more about acceleration at https://brainly.com/question/460763.

#SPJ4

Yes, this gas can be treated as an ideal gas  with a molecular weight of 50 is at 200 psia, 300f, and it has a density of 1.5 lbm/ft3.

This is because the molecular weight of the gas is relatively low, at 50, and the pressure and temperature of the gas are both within the range of the ideal gas law. The ideal gas law states that for a gas at a given temperature and pressure, the product of its pressure and volume is equal to the product of its temperature and molar gas constant. In this case, the pressure, temperature, and molar gas constant are all within the range of the ideal gas law, so the gas can be treated as an ideal gas.

To know more about pressure please refer:

https://brainly.com/question/29341536

#SPJ4

No, the normal force exerted on the book by the inclined plane and the weight force exerted on the book by the earth are not equal in magnitude.

The normal force acts perpendicularly to the inclined plane, while the weight force is a downward force. Since they are not in the same direction, their magnitudes cannot be determined.

The magnitude of the normal force is determined by the angle of the inclined plane. Since the normal force acts perpendicularly to the inclined plane, it can be calculated by finding the cosine of the angle of the inclined plane multiplied by the weight of the object.

For example, if the inclined plane has an angle of 30°, the normal force would be cos(30°) times the weight of the object. On the other hand, the weight force is determined by the gravitational force, which is a constant and always acts in the downward direction. Thus, the magnitude of the weight force is always equal to the weight of the object.

Learn more about The magnitude of the normal force:

https://brainly.com/question/28834706

#SPJ4

When object A exerts a force on object B, object B must exert an equal and opposite force on object A. This law essentially expresses a certain symmetry.

Forces always occur in pairs, and one body cannot exert a force on another without experiencing the force itself. Newton's third law of motion states that whenever a first object exerts a force on her second object, the first object experiences a force equal but opposite to the force it is exerting . Newton's third law of motion states that whenever the first object exerts a force on his second object, the first object experiences a force equal but opposite to the force it is exerting .

Learn more about Force

brainly.com/question/13014979

#SPJ4