Answer:
A. 0.15 M NaOH, and
E. 0.15 M HNO3
Explanation:
A buffer solution contains a conjugate acid-base pair with both the acid and the base in reasonable concentrations.
NaOH and HNO3 is an acid base pair with relatively equal concentrations. So, they would most likely make a buffer solution.
CTION REVIEW
a. What are five general properties of aqueous
acids?
After spraying water on a waxed surface, a student notices that the water beads up to form many individual drops rather than being spread out evenly across the surface. What property of water causes it to bead up like this?
A.The high boiling point of water
B.The strong adhesion to other substances
C. The high density of liquid water
D.The ability to dissolve many other substances
E. The strong cohesion between water molecules
Answer:
B. The strong adhesion to other substances
Explanation:
hope this helps!
Answer:
E. The strong cohesion between water molecules
Explanation:
Water is a very special molecule because of its hydrogen bonds. And, because of these hydrogen bonds, water has many properties that make it unique compared to other substances.
One such property is that it is cohesive, which means water molecules are attracted to each other. This is due to the polar bonds and hydrogen bonds that water molecules have. Because of the polar and hydrogen bonds, the molecules attract each other and stick together, creating that bead-like phenomenon that the student sees on the table.
Thus, the answer is E.
a. what mass of chromium would be produced from the reaction of 57.0 g of potassium with 199 g of chromium (ii) bromide according to the following reaction?
b. which reactant is in excess and how many grams of this reactant are left over ?
2k + CrBr2 -> 2kbr + cr
Answer:
2 K + 1 CrBr2 yield 2 KBr + 1 Cr
Explanation:
PH questions answer both please
Answer:
1. a, 1.66
2. c, 1.69
Explanation:
-log(H+)=pH
pH+pOH=14
If you want to produce 11 moles of NH3, how much H2 do you need?
Answer:
33 g of H2
Explanation:
N2 + 3 H2 -> 2 NH3
3 mol H2 -> 2 mol NH3
x -> 11 mol NH3
x= (11 mol NH3 * 3 mol H2)/ 2 mol NH3
x= 16.5 mol H2
1 mol H2 -> 2 g
16.5 mol H2 ->x
x= (16.5 mol H2 * 2 g)/ 1 mol H2
x= 33 g
the volume, in liters, occupied by 2.50 moles of N2 gas.
calculate at STP
Answer: The volume occupied by 2.50 moles of [tex]N_2[/tex] gas at STP is 56.0L
Explanation:
According to ideal gas equation:
[tex]PV=nRT[/tex]
P = pressure of gas = 1 atm (at STP)
V = Volume of gas = ?
n = number of moles = 2.50
R = gas constant =[tex]0.0821Latm/Kmol[/tex]
T =temperature =[tex]273K[/tex] (at STP)
[tex]V=\frac{nRT}{P}[/tex]
[tex]V=\frac{2.50mol\times 0.0821Latm/K mol\times 273K}{1atm}=56.0L[/tex]
Thus the volume occupied by 2.50 moles of [tex]N_2[/tex] gas at STP is 56.0L
Nitric acid can be formed in two steps from the atmospheric gases nitrogen and oxygen, plus hydrogen prepared by reforming natural gas. In the first step, nitrogen and hydrogen react to form ammonia:
N2 (g)+ 3H2(g) → 2NH3(g)
In the second step, ammonia and oxygen react to form nitric acid and water:
NH3(g)+ 2O2(g) → HNO3(g) + H2O(g)
Calculate the net change in enthalpy for the formation of one mole of nitric acid from nitrogen, hydrogen and oxygen from these reactions. Round your answer to the nearest .
Answer:
-376 kJ.
Explanation:
WHOSE Good with Chemistry to figure this question out?
Calculate the work in joules if the external pressure is 825 torr.
Remeber 1 L atm = 101.3 J
Answer:
[tex]\large \boxed{\text{220 J}}[/tex]
Explanation:
1. Convert the pressure to atmospheres
[tex]p = \text{825 Torr} \times \dfrac{\text{1 atm}}{\text{760 Torr}} = \text{1.086 atm}[/tex]
2. Calculate the work done
[tex]w = -p\Delta V = -p(V_{f} - V_{i}) = -\text{(1.086 atm)}(\text{2.0 L - 4.0 L})\\\\ = -\text{1.086 atm} \times \text{(-2.0 L)} = \text{2.17 L$\cdot$atm}[/tex]
3. Convert litre atmospheres to joules
[tex]w = \text{2.17 L$\cdot$atm} \times \dfrac{\text{101.3 J}}{\text{1 L$\cdot$atm}} = \textbf{220 J}\\\\\text{The work done is $\large \boxed{\textbf{220 J}}$}[/tex]
Note that the volume is decreasing, so work is being done on the system.
Fatty foods become rancid due to the process of
Answer:
Fatty foods become rancid due to the process of rancidity
If 11.5 ml of vinegar sample (d=1g/ml) is titrated with 18.5 ml of standardized Sodium hydroxide
solution. What is the molarity of acetic acid in vinegar sample ?
Answer:
10.35 M
Explanation:
Molarity = moles solute/ L solution
18.5 mL = 0.0185 L solution
11.5 mL (1g/1mL)= 11.5 grams vinegar (1 mol / 60.052 grams) = 0.1915 mol vinegar
M = 0.1915 mol vinegar/ 0.0185 L solution = 10.35M
* Please text me at 561-400-5105 for tutoring: I can do assignments, labs, exams, etc. :)
What is a paragraph to fit this
Answer:
They add carbon Dioxide into the air warming the atmosphere which adds to the greenhouse effect, Making the temperature higher
weather balloon is filled with helium to a volume of 340 L at 30 ∘C and 751 mmHg . The balloon ascends to an altitude where the pressure is 495 mmHg and the temperature is -27 ∘C.What is the volume of the balloon at this altitude?
Answer: Thus the volume of the balloon at this altitude is 419 L
Explanation:
Combined gas law is the combination of Boyle's law, Charles's law and Gay-Lussac's law.
The combined gas equation is,
[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]
where,
[tex]P_1[/tex] = initial pressure of gas = 751 mm Hg
[tex]P_2[/tex] = final pressure of gas = 495 mm Hg
[tex]V_1[/tex] = initial volume of gas = 340 L
[tex]V_2[/tex] = final volume of gas = ?
[tex]T_1[/tex] = initial temperature of gas = [tex]30^oC=273+30=303K[/tex]
[tex]T_2[/tex] = final temperature of gas = [tex]-27^oC=273-27=246K[/tex]
Now put all the given values in the above equation, we get:
[tex]\frac{751\times 340}{303}=\frac{495\times V_2}{246}[/tex]
[tex]V_2=419L[/tex]
Thus the volume of the balloon at this altitude is 419 L
what was the open-range system
Answer: In the Western United States and Canada, open range is rangeland where cattle roam freely regardless of land ownership. ... Land in open range that is designated as part of a "herd district" reverses liabilities, requiring an animal's owner to fence it in or otherwise keep it on the person's own property.
Explanation: Mark me as brainliest
How many atoms are in 4Ca3(PO4)2
Answer:
52
I personally don't know how to do this but this is what I was told the answer is
There are 22 atoms in calcium phosphate with chemical formula 4 Ca₃(PO₄)₂ .
To determine the number of atoms in a chemical formula, one need to multiply the number of atoms for each element by the corresponding subscript and then sum them up.
In the given chemical formula, 4 Ca₃(PO₄)₂, :
- 4 is the coefficient in front, indicating that the entire compound is multiplied by 4.
- Ca represents calcium, and the subscript 3 indicates there are 3 calcium atoms.
- (PO₄)₂ represents a group called a phosphate group. Within the phosphate group, we have 1 phosphorus atom (P) and 4 oxygen atoms (O). The subscript 2 outside the parentheses indicates that the entire phosphate group is multiplied by 2.
To calculate the total number of atoms, we multiply the coefficients by the subscripts and sum them up:for calcium (Ca):
3 calcium atoms × 4 = 12 calcium atoms
For phosphate:
1 phosphorus atom ×2 = 2 phosphorus atoms
4 oxygen atoms ×2 = 8 oxygen atoms
Adding up the totals:
12 calcium atoms + 2 phosphorus atoms + 8 oxygen atoms = 22 atoms
Therefore, there are 22 atoms in 4 Ca₃(PO₄)₂.
Learn more about chemical formula,here:
https://brainly.com/question/32018188
#SPJ6
state the purpose of respiration.
Answer:
The purpose of respiration is to supply the body with oxygen and eliminate carbon dioxide. Oxygen is essential for cellular respiration as cells cannot exist in the absence of it. The human lungs are the organs responsible for respiration.
Explanation:
Respiration refers to a person’s breathing and the movement of air into and out of the lungs. The respiratory system provides oxygen to body tissues for cellular respiration, removes the waste product carbon dioxide, and helps maintain acid–base balance. Inspiration is the process that causes air to enter the lungs, and expiration is the process that causes air to leave the lungs . A respiratory cycle (or one breath while you are measuring respiratory rate) is one sequence of inspiration and expiration.
Why are white Americans less affected by toxic waste and air pollution than people of color?
A.They tend to live in urban centers .
B. They tend to vote in smaller numbers compared to other groups.
C. They tend to have more of a say in where uncontrolled toxic waste sites are located.
D. All of the above are true.
Answer:
D. All the above
Explanation:
WHite people are "previlged"
what is 0.0000000012 in scientific notation
Answer:
1.2x10^9
Explanation:
You have to use a decimal point to count the zeros until you get to the one.
which of the following can cause acid precipitation
the use of solar panels
the use of hydroelectricity
the use of coal
all of the above
Answer:
C. The use of coal
Explanation:
Answer:
C. The use of coal
Explanation:
Edge 2021
the _ is responsible for absorbing the most uv radiation
What is the relationship between heat, temperature, thermal
energy within a system?
Answer:
The thermal energy, orheat, of an object is obtained by adding up the kinetic energy of all the molecules within it.Temperature is the average kineticenergy of the molecules.
give the systematic name for the following compound
Answer:
2,4–dimethylhexane.
Explanation:
To name the above compound, we must do the following:
1. Locate the longest continuous carbon chain. This gives the parent name. In this case, the longest chain is carbon 6 i.e Hexane.
2. Identify and Locate the position of the substituent group attached. In this case, the substituent group attached is methyl i.e CH3 and it is at carbon 2 and 4.
3. Combine the above to get the name.
Therefore, the name of the compound is:
2,4–dimethylhexane.
How many miles of glucose are in 19.1 g of glucose
Answer:
did you mean moles? If so, answer is down below.
Explanation:
there are 0.106 moles of glucose in 19.1 g of glucose.
Use your Cabbage pH Indicator Key to determine the pH of each. Enter the pH ranges into the data table.
Answer: pH :1-2 / acid
pH:7/neutral
pH:8-9/basic
Your welcome
Answer:1-2,7, 8-9
Explanation:
Acidic, neutral, basic
Compared to an enzyme with a Km of 10-6 mM, an enzyme having a Km of 10-8 mM
A. would have 100 times more product formed per min
B. would be described as having binding more tightly to the substrate
C. would be described as having a significantly lower affinity for the substrate
D. would have a Vmax 100 times larger
E. would have identical values for Vmax
Answer:
The correct answer is option B - would be described as having binding more tightly to the substrateExplanation:
Compared to an enzyme with a Km of 10-6 mM, an enzyme having a Km of 10-8 mM
The correct answer is option B - would be described as having binding more tightly to the substrate
Reason:
Km is the measure of substrate affinity. It is inversely proportional. Higher the Km, lower is the binding affinity of the enzyme and lower the Km, higher binding affinity of the enzyme to the substrate.
Therfore, Km of 10⁻⁸ will have higher substrate binding affinity than the 10⁻⁶ enzyme.
1. What is the answer to the following expression in the correct number of significant figures?
(0.1245) x (0.00003) x (298,000)/(2.0 - 1.5)
Answer:
2 with 1 SF
Explanation:
The chart below describes the molecular motion in solids, liquids, gases, and plasma.
Solids Liquids Gases Plasma
slower than liquids, slower than solids but faster than solids faster than solids,
gases, and plasma faster than gases and but slower than liquids and gases
plasma plasma
The information in the chart about molecular motion is incorrect for:______
1. solids
2. liquids
3. gases
4. plasma
Answer:
Liquids
Note: the attachment below shows the properly arranged chart
Explanation:
The order of molecular motion of matter from fastest to slowest is;
Plasma>Gases>Liquids>Solids
Liquids move faster than solids not slower.
Answer:
liguids
Explanation:
what is a respiration?
Answer:
Respiration is the biochemical process in which the cells of an organism obtain energy by combining oxygen and glucose, resulting in the release of carbon dioxide, water, and ATP (the currency of energy in cells)
Explanation:
The decomposition of nitrogen dioxide is described by the following chemical equation:
2NO_2 (g) --------> 2NO (g) + O_2 (g)
Suppose a two-step mechanism is proposed for this reaction, beginning with this elementary reaction:
NO_2 (g) --------> NO_(g) + O_(g)
Suppose also that the second step of the mechanism should be bimolecular.
a) Suggest a reasonable second step. That is, write the balanced chemical equation of a bimolecular elementary reaction that would complete the proposed mechanism.
Answer:
The balanced chemical equation will be "[tex]NO_{2}+O\rightarrow NO+O_{2}[/tex]".
Explanation:
The given equation is:
[tex]2NO_{2}\rightarrow 2NO+O_{2}[/tex]
Step 1:
[tex]2NO_{2}\rightarrow NO+O[/tex]...(equation 1)
Step 2:
[tex]NO_{2}+O\rightarrow NO+O_{2}[/tex]...(equation 2)
On adding "equation 1" and "equation 2", we get
⇒ [tex]NO_{2}+NO_{2}+O\rightarrow NO+O+NO+O_{2}[/tex]
⇒ [tex]2NO_{2}\rightarrow 2NO+O_{2}[/tex]
The second step:
⇒ [tex]NO_{2}+O\rightarrow NO+O_{2}[/tex]
what is 2H2O state of matter
Answer:
2 MOLECULES OF WATER
Explanation:
SO, LIQUID
How many moles would needed to be dissolved in 1 dm3 to get a 3M solution? How many would be needed if only 0.1 dm3 were used?
ILL ALSO GIVE BRAINLIST
Answer:
I dm u on Instagram
Explanation:
Check messages
According to molar concentration, 3 moles are needed to be dissolved in 1 dm³ to get a 3 M solution,and 0.3 moles would be needed if only 0.1 dm³were used.
What is molar concentration?Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.Substituting the values in given formula, number of moles=molar concentration×volume in liters=3×1=3 moles and for 0.1 dm³ it is 3×0.1=0.3 dm³.
Learn more about molar concentration,here:
https://brainly.com/question/21841645
#SPJ2