For calculation of potential energy mass of the apple , average acceleration of the apple and height of apple is required.
Energy While for calculation of kinetic energy volume of the apple and time the apple was in air, the average velocity of the apple and amount of energy lost to friction is required.Based on the force exerted on the two objects, the potential energy equation is determined. P.E. = mgh, where m is the mass in kilograms, g is the acceleration caused by gravity (9.8 m/s2 at the earth's surface), and h is the height in meters, is the formula for gravitational force.The relationship between kinetic energy and an object's mass and squared velocity is given by K.E. = 1/2 m v2. If the mass is measured in kilograms and the speed is measured in meters per second, the kinetic energy is measured in kilogram-meters squared per second squared.For more information on kinetic and potential energy kindly visit to
https://brainly.com/question/11749818
#SPJ1
Find the angle ϕ between the filter's polarizing axis and the direction of polarization of light necessary to increase the ratio of the clouds' intensity to that of the blue sky so that it is three times the normal value. Express your answer in degrees to four significant figures
"The required angle Ф between the filter's polarizing axis and the direction of polarization of light necessary to increase the ratio of the clouds' intensity to that of the blue sky so that it is three times the normal value is 65.9°."
A photographer wants to click a picture of a cloud formation, the ratio of clouds intensity to that of the blue sky photographer uses polarizing filter from Malus law,
I = I₀ cos²Ф
So, I f = I i cos²Ф
As the light from cloud is polarized, its intensity reduces to half.
I c = I₀/2
The intensity of light from sky is polarized light.
I s = I₀ cos²Ф
Hence, the ratio of intensities is,
I c/I s = (I₀/2)/(I₀ cos²Ф)
3 = (I₀/2)/(I₀ cos²Ф)
cos²Ф = 1/6
Thus, the required angle is Ф = cos⁻¹(1/√6) = 65.9°
To know more about angles:
https://brainly.com/question/28562350
#SPJ4
Which turbine takes the lesser amount of time to rotate through 1.0 radian of angular displacement? a. turbine A b. turbine B c. They take the same amount of time. d. The answer cannot be determined from the information given.
The correct option is C, The turbine that takes the lesser amount of time to rotate through 1.0 radian of angular displacement is both because They take the same amount of time.
A turbine is a device that converts kinetic energy from a fluid (such as water, steam, or air) into mechanical energy. It is composed of a series of rotating blades that are attached to a shaft. When the fluid flows over the blades, it causes them to rotate, which in turn rotates the shaft.
Turbines are commonly used in power generation to generate electricity. For example, in a hydroelectric power plant, water flows through a turbine, which spins a generator to produce electricity. Similarly, in a gas or steam turbine power plant, the combustion of fuel heats up air or water to create steam, which flows through a turbine to produce electricity.
To learn more about Turbine visit here:
brainly.com/question/30559123
#SPJ4
if an object has a mass of 200 kg and a weight of 1000 n, what is g? a. 0.2 n/kg b. 20 n/kg c. 10 n/kg d. 5 n/kg
The value of g, the acceleration due to gravity, is approximately 5 m/s2 or 10 n/kg.
To calculate g, we use the formula:
g = F/m
where g is the acceleration due to gravity, F is the force of gravity or weight, and m is the mass of the object.
Given that the mass of the object is 200 kg and the weight is 1000 N, we can plug in the values and solve for g:
g = 1000 N / 200 kg = 5 m/s2
Therefore, the value of g is approximately 5 m/s2 or 10 n/kg.
For more similar questions on acceleration:
brainly.com/question/25876659
#SPJ11
a small mirror with area 5 cm^2 faces a monochromatic light source that is 3.2 m away. at the mirror the electric field amplitude of the from the source is 0.028 v/m. how much energy is incident on the mirror in 1 s
The energy incident on the mirror in 1 s is: 5.146 × 10⁻²⁰ J.
Given that, Area of small mirror = 5 cm²
Electric field amplitude of the from the source at the mirror = 0.028 V/m
Distance of monochromatic light source from the mirror = 3.2 m
We need to calculate how much energy is incident on the mirror in 1 s.
Amplitude of a wave is the measure of its strength. It is defined as the displacement of the crest or trough of the wave from its rest position.
In this question, we have the amplitude of the electric field which is 0.028 V/m.
Energy carried by a wave is directly proportional to the square of the amplitude.
The energy of an electromagnetic wave is given by the following relation:
E=hc/wavelength where, h is Planck's constant (6.63 x 10⁻³⁴ J s), c is the speed of light (3 x 10⁸ m/s)
Energy of wave can also be given by the following relation: E=1/2 ε₀ E², where,ε₀ is the permittivity of free space.
Energy of wave can also be given by the following relation:
E=1/2 B₀ H², where, B₀ is the magnetic field constant H is the magnetic field strength
Now, the energy incident on the mirror in 1 s can be calculated as follows:
Electric field amplitude at the mirror = 0.028 V/m
Energy of wave can be given as, E=1/2 ε₀ E²=1/2 × 8.85 × 10⁻¹² C²/Nm² × (0.028 V/m)²= 1.0292 × 10⁻¹⁸ J/m²
Total energy incident on the mirror in 1 s= Energy per unit area × Area of mirror= 1.0292 × 10⁻¹⁸ J/m² × 0.05 m²= 5.146 × 10⁻²⁰ J
To know more about "electric field" refer here:
https://brainly.com/question/8705524#
#SPJ11
The 6-kg collar has a velocity of 2 m/s to the right when it is at A It then travels along the smooth guide shown. The spring has an unscratched length of 100 mm and B is located just before the end of the curved portion of the rod.
The speed of the collar when its center reaches point B is 1.4 m/s.
The velocity of the 6-kg collar when its center reaches point B can be determined using the concepts of velocity, spring length, and conservation of energy.
The equation for conservation of energy is E = 1/2 mv² + 1/2 kx², where m is the mass of the object, v is the velocity, k is the spring constant, and x is the displacement of the spring.
At point A, the initial velocity is 2 m/s and the displacement of the spring is 0, so the total energy is
E = 1/2(6kg)(2m/s)².
At point B, the displacement of the spring is 100mm, so the total energy is
E = 1/2(6kg)(v²) + 1/2k(0.1m)²
Setting these equations equal to each other and solving for v, the velocity of the collar at point B is 1.4 m/s.
Learn more about conservation of energy on:
https://brainly.com/question/166559
#SPJ11
The temperature of a gas stream is to be measured by a thermocouple whose junction can be approximated as a 1.2-mm-diameter sphere. The properties of the junction are k = 35 W/m °C, rho= 8500 kg/m3 ,and Cp = 320 J/kg °C, and the heat transfer coefficient between the junction and the gas is h = 65 W/m2 °C. Determine how long it will take for the thermocouple to read %95 of the initial temperature difference.
It will take about 12.12 minutes for the thermocouple to read 95% of the initial temperature difference of the sphere. This is due to difference in temperature.
What is the time required to read 95% of initial temperature difference?
In order to determine how long it will take for the thermocouple to read 95% of the initial temperature difference, the following formula is used:
t = (rho × V × Cp)/(h × pi × D) × ln ((Tinitial - T∞) / (Tinitial - Tcutoff))
where, t = time (s), ρ = density (kg/m³), V = volume (m³), Cp = specific heat capacity (J/kg °C), h = heat transfer coefficient (W/m²°C), D = diameter (m), Tinitial = initial temperature (°C), T∞ = surrounding temperature (°C), Tcutoff = temperature at which the thermocouple reading is 95% of the initial temperature difference (°C).
Substituting the given values into the above formula:
t = (8500 kg/m³ × (4/3 × pi × (0.0006 m)³)) / (65 W/m2 °C × pi × 0.0012 m) × ln ((100 °C - 25 °C) / (100 °C - 95 °C))
t = 727.31 s or 12.12 minutes.
Therefore, it will take approximately 12.12 minutes for the thermocouple to read 95% of the initial temperature difference.
Learn more about Thermocouple here:
https://brainly.com/question/14555057
#SPJ11
The major types of stress are ___ A. Ductile and Brittle B. Compression, Ductile, and Brittle C. Compression, Strain, and Deformation D.Shear, Tension and Compression E. Shear, Ductile, Tension, Brittle, and Compression
The major types of stress are shear, Tension, and Compression. Therefore option D is correct.
Stress refers to the internal forces acting on a material, causing it to deform or change shape. Different types of stress can act on a material, and they are characterized by the way in which the forces are applied.
1. Shear stress: Shear stress occurs when two forces act parallel to each other but in opposite directions, causing the material to deform by sliding or shearing.
2. Tension stress: Tension stress occurs when forces are applied to pull a material apart. It leads to elongation or stretching of the material.
3. Compression stress: Compression stress occurs when forces are applied to squeeze or compress a material.
Therefore, the correct answer is D. Shear, Tension, and Compression, as these three options represent distinct types of stress commonly encountered in materials and structures.
Know more about internal forces:
https://brainly.com/question/20639242
#SPJ4
The major types of stress are Shear, Tension and Compression. The correct option is D.
Thus, Shear stress, tension stress, and compression stress are the three main forms of stress.
Shear stress is a condition when forces acting in opposite directions and parallel to a surface cause the material to deform by sliding or shearing. It is connected to the propensity for one layer of material to slide or move in relation to another layer.
Tension stress, sometimes referred to as tensile stress, is the strain that develops when a material is subjected to pulling or stretching forces that are applied in opposition to one another, causing the material to elongate. The material tends to be pulled apart by tension stress.
Thus, The major types of stress are Shear, Tension and Compression. The correct option is D.
Learn more about Shear stress, refer to the link:
https://brainly.com/question/20630976
#SPJ12
Which of these stars has the greatest surface temperature? a.... Which of these stars has the greatest surface temperature? a. a main-sequence B star b. a supergiant A star c. a giant K star
A main-sequence B star has the greatest surface temperature among the given options. B-type stars are hotter and more massive than A-type stars, which are in turn hotter and more massive than K-type stars.
The star with the highest surface temperature among these three classifications is a main-sequence B star. A, F, G, K, and M stars, which make up the majority of main-sequence stars in the Milky Way galaxy, are hotter and less massive than B-type stars. B stars' surface temperatures typically vary from 10,000 to 30,000 Kelvin (K), with some of the hotter stars exceeding 30,000 K. Surface temperatures of K-type giants range from around 3,500 to 5,000 K, whereas those of A-type supergiants range from about 7,500 to 11,000 K.
Learn more about surface temperature here:
https://brainly.com/question/5344945
#SPJ4
when the air is in geostrophic balance, it flows _______ to isobars _________ the boundary layer.
When the air is in geostrophic balance, it flows parallel to isobars and above the boundary layer.
Geostrophic balance is a state of balance between the pressure gradient force and the Coriolis force, where the pressure gradient force is directed from higher to lower pressure, and the Coriolis force is perpendicular to the direction of motion. In this state, the wind flows parallel to the isobars, with the pressure gradient force and the Coriolis force balancing each other out.
The boundary layer is the layer of air near the Earth's surface where friction between the air and the surface slows down the wind and causes it to flow in a more complex manner, with the wind direction changing with height. However, in the geostrophic flow regime, the wind flow is typically above the boundary layer and thus not affected by surface friction.
Therefore, in geostrophic balance, the wind flows parallel to isobars and above the boundary layer, with little to no effect from the Earth's surface.
Learn more about geostrophic balance here
brainly.com/question/28314662
#SPJ4
Which statement describes what most likely occurs when a magnetic compass is placed next to a simple circuit made from a battery, a light bulb, and a wire?A magnetic field created by the compass causes the light bulb to stop working.A magnetic field created by the electric current causes the compass needle to move.A magnetic field created by the compass increases the current in the electrical circuit.A magnetic field created by the electric current places negative charges on the compass.
A magnetic field created by the electric current causes the compass needle to move. This is the most likely outcome when a magnetic compass is placed adjacent to a basic electrical circuit consisting of a battery, a light bulb, and a wire.
A magnetic field is created around a wire as electricity flows through it. The compass needle moves as a result of the interaction between this magnetic field and the Earth's magnetic field. Consequently, the magnetic field produced by the electric current in the wire causes the compass needle to move when a magnetic compass is put next to a basic circuit comprised of a battery, a light bulb, and a wire. The interplay of magnetic fields and electric currents is employed in numerous applications, such as electric motors and generators, to transform electrical energy into mechanical energy and vice versa.
learn more about magnetic compass here:
https://brainly.com/question/2264542
#SPJ4
Milk with a density of 970 kg/m ∧ 3 is transported on a level road in a 9−m long, 3−m diameter cylindrical tanker. The tanker is completely filled with milk, i.e., no air space in the tank. If the truck is accelerating from a stop signal at 7.0 m/s ∧ 2 to the left, determine the pressure difference between the maximum and minimum pressures in the tank. Depict on the figure the location of the minimum and maximum pressures in the tank.
ΔP = (970 kg/m^3)(7.0 m/s^2)(4.26 m) = 29,852 Pascal. Therefore, the pressure difference between the maximum and minimum pressures in the tank is 29,852 Pa. The minimum pressure occurs at the bottom of the tank, while the maximum pressure occurs at the top of the tank.
The pressure difference between the maximum and minimum pressures in the tank can be calculated using the equation for pressure:
P = ρgh
where P is the pressure, ρ is the density of the milk, g is the acceleration due to gravity, and h is the height of the liquid column. Since the tanker is cylindrical and completely filled with milk, the height of the liquid column can be determined using the formula for the volume of a cylinder:
V = πr^2h
where V is the volume of the milk, r is the radius of the tanker (which is half of the diameter), and h is the height of the milk column. Solving for h, we get:
h = V / (πr^2)
The volume of the milk can be determined using the formula for the volume of a cylinder:
V = πr^2h
where r is the radius of the tanker (which is half of the diameter), and h is the length of the tanker. Substituting the given values, we get:
V = π(3/2)^2(9) = 31.8 m^3
The height of the liquid column is:
h = V / (πr^2) = 31.8 / (π(3/2)^2) = 4.26 m
The pressure difference between the maximum and minimum pressures in the tank can be calculated using the formula:
ΔP = ρgh
where ΔP is the pressure difference, ρ is the density of the milk, g is the acceleration due to gravity, and h is the height of the liquid column. Substituting the given values, we get:
ΔP = (970 kg/m^3)(7.0 m/s^2)(4.26 m) = 29,852 Pa
Therefore, the pressure difference between the maximum and minimum pressures in the tank is 29,852 Pa. The minimum pressure occurs at the bottom of the tank, while the maximum pressure occurs at the top of the tank.
For more such questions on Pressure
https://brainly.com/question/20492463
#SPJ11
on a sunny day, a rooftop solar panel delivers 55 w of power to the house at an emf of 17 v . part a how much current flows through the panel? express your answer with the appropriate units.
On a sunny day, a rooftop solar panel delivers 55 w of power to the house at an emf of 17 v . the current flows through the panel is 3.235 A.
The amount of current flowing through the panel can be calculated using Ohm's Law (I = p/v). When working with the formula, Power = Voltage × Current (P = V × I), one can determine the current that flows through the panel by rearranging the formula to:
Current = Power/Voltage (I = P/V).
The calculation of the current (I) is given as follows: I = P/V = 55 W / 17 V = 3.235 A.
Therefore, 3.235 A of current flows through the solar panel on a sunny day.
Read more about current here:
https://brainly.com/question/12785175
#SPJ11
Barney, a bumblebee flying at 6.00 m/s, is being chased by Betsy, a bumblebeewho is flying at 4.00 m/s. Barney’s wings beat with a frequency of 90.0 Hz.What frequency does Betsy hear as she flies after Barney?
Suppose a bird takes off from a tree and files in a straight line. It reaches a speed of 10 m/s. What is the change in the birds velocity?
Answer:
10m/s
Explanation:
Change in velocity is given by:
final velocity - initial velocity
Here final velocity is 10 m/s and the initial velocity is 0m/s. This is because initially the bird was a rest.
ΔV = [tex]V_{f} - V_{i}[/tex]
ΔV = 10 - 0
ΔV = 10m/s
Suppose you recall that you had a pleasant conversation with a cashier the other day when you went to get coffee. This memory should be viewed as primarily being________
A. Semantic
B. Autobiographical
C. Procedural
D. Episodic
B. Autobiographical. Autobiographical memory refers to memories related to personal experiences, such as conversations with a cashier. In contrast, semantic memory is related to general knowledge, procedural memory refers to remembering how to do things, and episodic memory refers to specific events and the associated context.
The memory of having a pleasant conversation with a cashier when getting coffee should be viewed as primarily being autobiographical.What is an autobiographical memory?Autobiographical memories are those that we have of our own life events and experiences. They are our personal memories of things that have happened to us, such as our first day at school, a vacation with family, or a significant life event. As autobiographical memories are individual, they can differ from person to person. They're a type of episodic memory that's long-term in nature. Episodic memory is the ability to recall specific events, including personal experiences. It's different from semantic memory, which involves remembering facts or general knowledge. Procedural memory is responsible for retaining the ability to carry out specific activities or procedures, such as riding a bike or playing an instrument. Therefore, in the case of the student question, having a pleasant conversation with a cashier when getting coffee is an example of an autobiographical memory because it is a personal experience. Hence, the answer is option B. Autobiographical.
For more such questions on Autobiographical
https://brainly.com/question/17161491
#SPJ11
if a 1.4 v battery stores 5.3 kj of energy (a reasonable value for an inexpensive c cell), for how many minutes could it sustain a current of 1.1 a ? if a 1.4 battery stores 5.3 of energy (a reasonable value for an inexpensive c cell), for how many minutes could it sustain a current of 1.1 ? 2.1 min 6.1 min 9.1 min 57 min
The battery can sustain a current of 1.1 A for approximately 57 minutes. Thus, the correct option will be D, 57 minutes.
What is the meaning of energy?Energy is the ability of a system to perform work. The unit of energy in the SI system is the joule (J). A joule is equal to the work done when a force of one newton is applied over a distance of one meter.In this case, we have a 1.4 V battery storing 5.3 kJ of energy.
Using the equation,
Energy = Power × Time
We can derive the expression,
Time = Energy/Power
where, Energy = 5.3 kJ = 5,300 J,
Power = Voltage × Current = 1.4 V × 1.1 A = 1.54 W
Substituting the values,Time = 5,300 J/1.54 W
Time = 3441.56 s = 57.36 minutes
Therefore, the battery can sustain a current of 1.1 A for approximately 57 minutes.
Learn more about Energy here:
https://brainly.com/question/29861164
#SPJ11
consider an experimental setup where charged particles (electrons or protons) are first accelerated by an electric field and then injected into a region of constant magnetic field with a field strength of 0.55 t.
What is the potential difference in volts required in the first part of the experiment to accelerate electrons to a speed of 6 1 × 107 m/s?
The potential difference in volts required in the first part of the experiment to accelerate electrons to a speed of 6.1 × 107 m/s is 73 kV.
What is potential difference?Potential difference is the amount of energy that is required to move a unit charge through an electric field from one point to another. The unit of potential difference is volts (V), and it is a scalar quantity. It is also known as voltage or electric potential difference.
The formula for calculating potential difference is as follows: Potential difference (V) = work done (J) / charge (C) or
V = W / Q,
where W is the work done and Q is the charge involved in the process
Work done is given as: W = F × d × cosθ
where, F is the force, d is the displacement, and θ is the angle between the force and the displacement.
Therefore, V = (F × d × cosθ) / Q
Field strength = 0.55 T
Charge on the electron, -e = 1.6 × 10¹⁹ C
Mass of the electron, me = 9.1 × 10⁻³¹ kg
Speed of the electron = 6.1 × 10⁷ m/s
The electric field (E) is given as: E = V / d
F = Q × E = -e × V/d = -1.6 × 10⁻¹⁹ × V / 0.5 = -3.2 x 10⁻¹⁹ × V N
θ = 0° (as the force and displacement are parallel)
W = F × d × cosθ = F × d = -3.2 × 10⁻¹⁹ × V × 0.5 = -1.6 × 10⁻¹⁹ × V J
Now, the kinetic energy (KE) of the electron is given as: KE = 1/2 mv²
Substituting the values, we get: KE = 1/2 mev² = 1/2 × 9.1 × 10⁻³¹ × (6.1 × 10⁷)² = 2.8 × 10⁻¹⁷ J
As the work done by the electric field is equal to the kinetic energy of the electron, we can equate the values:
1.6 × 10⁻¹⁹ × V = 2.8 × 10⁻¹⁷
Solving for V, we get: V = -2.8 × 10⁻¹⁷ / -1.6 × 10⁻¹⁹
V = 175 V
Therefore, the potential difference in volts required in the first part of the experiment to accelerate electrons to a speed of 6.1 × 10⁷ m/s is 175 V.
Learn more about Potential difference here:
https://brainly.com/question/12198573
#SPJ11
phase of the moon where only a very small part of the lit surface is seen from earth is called?
The phase of the moon where only a very small part of the lit surface is seen from the earth is called the crescent moon phase.
This phase occurs when the illuminated portion of the moon is less than half, but not yet a new moon. When the crescent moon appears in the sky, it is usually visible in the west just after sunset and looks like a thin curved shape. The crescent moon is visible for a few days, after which it transitions into the first quarter moon phase. The phases of the moon are a result of the moon's changing position relative to the sun and the earth.
As the moon orbits the earth, different parts of its surface are illuminated by sunlight. This is why we see different phases of the moon as it rotates around the earth. The phases of the moon include the new moon, waxing crescent, first quarter, waxing gibbous, full moon, waning gibbous, third quarter, and waning crescent. The crescent moon phase is just one of these eight phases.
To learn more about Moon :
https://brainly.com/question/13086036
#SPJ11
as a joint is moved through its range of motion when strength training with free weights, such as doing the arm curl, the moment arm for the muscle when approaching the hardest portion of the lift will get ____
When performing strength training exercises with free weights, such as the arms curl, the moment arm for the muscle will get shorter as the joint is moved through its range of motion and approaches the hardest portion of the lift.
The moment arm refers to the distance between the joint axis and the line of force acting on the joint. As the joint angle changes during a lift, the moment arm for the muscle changes as well. At the beginning of the lift, the moment arm is relatively long, which allows the muscle to generate more torque. However, as the joint angle changes and the muscle approaches its maximum contraction, the moment arm gets shorter, which reduces the muscle's ability to generate torque.
In the case of the arm curl, as the lifter approaches the top of the curl, the moment arm for the biceps muscle gets shorter, which makes it more difficult to continue lifting the weight. This is why many lifters struggle to complete the top portion of the curl, as it requires more effort from the muscle to generate the necessary torque.
Learn more about the moment arm:
https://brainly.com/question/13945923
#SPJ11
dulce is planning an experiment using a nail, wire, and a battery to investigate which factors that affect the strength of an electromagnet, and which factors do not affect its strength. which factor would least affect the strength of the electromagnet?
The length of the wire would have the least impact on the strength of an electromagnet compared to factors such as the number of wire turns and the current flowing through the wire.
The factor that would least affect the strength of an electromagnet in this setup is the length of the wire.
In an electromagnet, the strength of the magnetic field produced depends on several factors, including the number of wire turns (coil windings), the current flowing through the wire, and the material of the core (in this case, the nail). Increasing the number of wire turns and the current will generally increase the strength of the electromagnet.
However, the length of the wire does not have a significant impact on the strength of the electromagnet in this specific setup. The length of the wire affects the resistance of the circuit, which can impact the current flowing through the wire.
However, for a given wire material and cross-sectional area, doubling the length of the wire would double the resistance, but it would also double the length of the wire turns in the coil. The net effect on the strength of the electromagnet would be minimal since the increased resistance would be compensated by the increased number of turns.
Therefore, in this experiment, the length of the wire would least affect the strength of the electromagnet compared to other factors such as the number of wire turns or the current flowing through the wire.
To learn more about Electromagnetic Fields click:
https://brainly.com/question/13967686
#SPJ12
For which of these questions could a testable hypothesis be developed? Check all that apply.
Does the width of a rubber band affect how far it will stretch?
How does the thickness of a material affect insulation?
Which of Nikola Tesla’s inventions was the coolest?
Do all objects fall to the ground at the same speed?
Which laboratory experiment is the most fun?
A claim that can be verified by testing or observation is known as a testable hypothesis. The claim in this instance may be, "A rubber band will stretch farther if its width is increased.
Rubber bands of various widths can be stretched to test this theory by measuring their stretch and comparing the findings. Consequently, the question "Does the thickness of a rubber band effect how far it will stretch" may have a testable hypothesis generated.
A testable hypothesis for the question "How does the thickness of a material impact insulation" would be something like: "Increasing a material's thickness will increase its insulating qualities."
Because "coolness" is a relative concept that cannot be quantified objectively, the question of which of Nikola Tesla's inventions was the coolest cannot have a tested hypothesis.
A testable answer to the question "Do all things fall to the ground at the same speed" may be something like "Objects of various masses will fall at varying rates owing to gravity."
learn more about testable hypothesis here:
https://brainly.com/question/1612010
#SPJ4
A, B & D are the correct answers
consider two planets in space that gravitationally attract each other. if the masses of both planets are doubled, and the distance between them is also doubled, then the force between them is group of answer choices four times as much. half as much. twice as much. remains the same. one quarter.
If the masses of two planets in space that gravitationally attract each other are doubled and the distance between them is also doubled, then the force between them remains the same.
To determine the force between two planets, we use the formula:
F = Gm1m2/r^2
where F is the force of gravitational attraction between the two planets, G is the gravitational constant, m1 and m2 are the masses of the planets, and r is the distance between them.
If both masses are doubled and the distance between them is also doubled, the new force between them can be calculated as follows:
F' = G(2m1)(2m2)/(2r)^2
Simplifying this expression, we get:
F' = Gm1m2/r^2
which is the same as the original force between the planets.
Therefore, if the masses of two planets are doubled and the distance between them is also doubled, the force between them remains the same.
For more similar questions on gravitation and physics:
brainly.com/question/27996005
#SPJ11
a piano tuner uses a tuning fork to adjust a piano wire to certain frequency. how does the piano tuner do this (select all that apply)?
Adjust the tension in the piano wire using a tuning wrench until the beats or interference disappear, indicating that the frequencies are now the same.
What is Frequency?
Frequency is the number of cycles of a periodic wave that occur in a given unit of time. The higher the frequency, the more cycles occur per unit of time, and the higher the pitch of the sound wave associated with the frequency. In general, frequency is used to describe any regularly recurring event or pattern, such as the oscillation of a pendulum, the vibration of a guitar string, or the electromagnetic waves that make up light and radio signals.
The piano tuner uses the following methods to adjust a piano wire to a certain frequency:
Strike the tuning fork to create a pure tone with a known frequency.
Hold the tuning fork close to the piano wire and listen for any beats or interference between the two frequencies.
Verify the tuning using a piano tuning app or a reference tone, if necessary.
Learn more about Frequency from given link
https://brainly.com/question/254161
#SPJ1
a bicyclist on an old bike (combined mass: 83 kg) is rolling down (no pedaling or breaking) a hill of height 115 m. over the course of the 345 meters of downhill road, she encounters a constant friction force of 239 newton. if her speed at the top of the hill is 9 m/s, what is her speed at the bottom of the hill?
The speed of the bicyclist at the bottom of the hill is 27.5 m/s.
A bicyclist on an old bike with a combined mass of 83 kg is rolling down a hill of height 115 m.
During the course of the 345 meters of downhill road, she encounters a constant friction force of 239 newton.
If her speed at the top of the hill is 9 m/s, what is her speed at the bottom of the hill?The sum of the potential energy and the kinetic energy of the cyclist at the top of the hill will equal the sum of the potential energy and the kinetic energy at the bottom of the hill, as there is no external work done on the cyclist.
Hence, the kinetic energy at the bottom of the hill will be equal to the initial kinetic energy minus the work done due to the frictional force.
The potential energy of the cyclist at the top of the hill = mgh ,where m = 83 kg, g = 9.8 m/s², and h = 115 m
Potential energy = (83 kg) × (9.8 m/s²) × (115 m) = 99749 Joules
At the top of the hill, the total energy of the cyclist is the sum of the potential energy and the kinetic energy.
E_total = 99749 + (1/2) × (83 kg) × (9 m/s)²
E_total = 99749 + 33417.75
E_total = 133166.75 Joules
At the bottom of the hill, the total energy of the cyclist is the sum of the kinetic energy and the work done by friction.
E_total = (1/2) × (83 kg) × v² + (239 N) × (345 m)
E_total = (1/2) × (83 kg) × v² + 82355 Joules
The potential energy of the cyclist has transformed to kinetic energy and work done due to friction.
Equating the two equations above:133166.75 = (1/2) × (83 kg) × v² + 82355Solving for v:249.25 = (1/2) × (83 kg) × v²v² = 5999v = 27.5 m/s
To know more about "constant friction force" refer here:
https://brainly.com/question/30111741#
#SPJ11
please help!!
If an object were in motion, how might you use a magnet to change the direction of its motion? Diagram the setup and explain your reasoning.
If the object in motion has some magnetic properties or contains a magnet, we can use another magnet to change its direction of motion by exerting a force on it through magnetic interaction. This principle is known as the Lorentz force.
Here's how we can set up the experiment:
Take a magnet and place it on a flat surface.
Take another magnet or the object with magnetic properties that is in motion.
Hold the magnet or the object in your hand and bring it close to the stationary magnet without touching it.
Move the magnet or the object towards the stationary magnet and observe its behavior.
If the magnet or the object has the same polarity as the stationary magnet, they will repel each other, and the motion of the object will be deflected in a direction away from the stationary magnet. If the magnet or the object has opposite polarity to the stationary magnet, they will attract each other, and the motion of the object will be deflected in a direction towards the stationary magnet.
Here's a diagram to help you visualize the setup:
N S N S
__________ __________
| | | |
| M1 | | M2 |
|__________| |__________|
( ) ( )
| |
Motion Stationary
Object Magnet
In this diagram, M1 represents the motion object or magnet, and M2 represents the stationary magnet. The N and S represent the North and South poles of the magnets. The arrows indicate the direction of motion and the direction of the magnetic field.
As we move M1 towards M2, the magnetic interaction will exert a force on M1, causing it to change its direction of motion. The direction of deflection will depend on the polarity of the magnets.
Note: It's important to keep in mind that the magnetic force is only one of the many factors that can affect the motion of an object. Other factors such as friction, air resistance, and gravitational forces can also play a significant role.
To know more about Motion visit :-
https://brainly.com/question/453639
#SPJ1
standard number of bones in the appendicular skeleton
The standard number of bones in the appendicular skeleton varies slightly among individuals, but it is generally accepted that there are 126 bones in the appendicular skeleton of an adult human.
The appendicular skeleton includes all the bones that are attached to the axial skeleton, which includes the skull, vertebrae, and ribcage. The appendicular skeleton consists of the bones of the arms, legs, pelvis, and shoulder girdle. Here is a breakdown of the number of bones in each part of the appendicular skeleton: Arms: 60 bones (30 in each arm) Legs: 60 bones (30 in each leg) Pelvis: 2 bones Shoulder girdle: 4 bones Adding up these numbers gives a total of 126 bones in the appendicular skeleton. However, this number can vary slightly among individuals due to differences in bone structure and development.
Learn more about bones here:
https://brainly.com/question/29606469
#SPJ4
You are carrying a 6.00 kg
bag at a height of 3.20 m
above the level floor of a 4.220
mlong room at a constant
velocity of 0.60 m s'. How
much work do you do on the
bag in moving across the
room?
OA. 247J
O B. 182J
Oc.0J
OD.
318 J
O E. 34J
Answer:
The answer is A) 247 J, which is the closest to the calculated value.
Explanation:
To calculate the work done on the bag, we need to use the formula:
work = force x distance x cos(theta)
where force is the weight of the bag (mg), distance is the length of the room, and theta is the angle between the force and the displacement (which is zero since the force and displacement are in the same direction).
First, let's calculate the force:
force = weight of the bag = mg = (6.00 kg) x (9.81 m/s^2) = 58.86 N
Next, let's calculate the distance:
distance = length of the room = 4.220 m
Now, we can calculate the work done:
work = (58.86 N) x (4.220 m) x cos(0) = 247.68 J
what did oersted discover about electricity and magnetism
Hans Christian Oersted established the connection between electricity and magnetism in 1820. The magnetic field produced by the current revolves around the wire in a circle.
Oersted demonstrated how a magnetic field may be produced by moving electrons by establishing a compass through a wire carrying an electric current.
Scientists believed that electricity and magnetism had no connection until the discovery of electromagnetism. Hans Christian Oersted, a scientist from Denmark, revolutionised all of that. He found that an electric current in a wire may cause a magnetic field, as evidenced by the fact that the current can cause a magnetised compass needle to deflect.
The electrons in the wire are pushed when a coil of wire is moved around a magnet or vice versa, producing an electrical current. In essence, kinetic energy—the energy of motion—is transformed into electrical energy via electricity generators.
Learn more about Electricity here:
https://brainly.com/question/12791045
#SPJ4
I need help with this question
The gardener does 5600 joules of work in pushing the wheelbarrow around the lawn.
Step-by-step calculation:
The distance traveled by the wheelbarrow is the perimeter of the lawn, which is:
Perimeter = 3 m + 4 m + 3 m + 4 m = 14 m
The net force exerted on the wheelbarrow is the sum of the force used to push it along the ground and the force used to lift it off the ground:
Net force = 100 N + 300 N = 400 N
The angle between the force and the direction of motion is 0 degrees, so the cosine of the angle is 1.
The work done by the gardener is given by:
Work = Force x Distance x cos(theta)
Substituting the values we found above, we get:
Work = 400 N x 14 m x cos(0 degrees)
Work = 5600 J
Therefore, the gardener does 5600 joules of work in pushing the wheelbarrow around the lawn.
To know more about perimeter, visit:
https://brainly.com/question/6465134
#SPJ1
Give a counterexample to show that the following construction fails to prove that the class of context-free languages is closed under the star operation. Let A be a CFL that is generated by the CFG G = (V, σ, R, S). Add the new rule S → SS and call the resulting grammar G0 . It is hoped that G0 generates A∗ .
Consider the following counterexample to prove that the construction fails to prove that the class of context-free languages is closed under the star operation:
Let A be a context-free language that consists of only one word "a".
So, the grammar for A would be as follows: G = ({S}, {a}, {S → a}, S)
Let A* be the concatenation of any number of words of A including 0 words.
Hence, A* = {ε, a, aa, aaa, aaaa, …}
Now, construct G0 by adding the new rule S → SS to G.
So, the grammar G0 would be as follows: G0 = ({S}, {a}, {S → a, S → SS}, S)
According to the construction, we can say that G0 generates A* if A is a context-free language.
However, A* can be shown as not context-free using pumping lemma for context-free languages.
Hence, we can say that G0 does not generate A* although A is a context-free language. Thus, the construction fails to prove that the class of context-free languages is closed under the star operation.
To know more about "context-free language" refer here:
https://brainly.com/question/29762238#
#SPJ11