Amanda inserted the gel tray with the well towards the red ( ) end of the chamber during gel electrophoresis and carefully pipetted her samples into the wells as indicated in the lab directions. After viewing her gel under UV light, she did not find bands in the regions that she was expecting. What did she most likely see in her gel results and why

Answer:

Coal

Explanation:

thx for points :D

Answer:

Coal

Explanation:

your welcome<3

Answer:

True

Explanation:

A chemical change is otherwise known as a chemical reaction. A chemical change is characterized by the formation of new substances, evolution of heat and change in chemical composition of substances. The change in the composition of substances during a chemical change is the result of the making and breaking of chemical bonds during a chemical change.

A chemical change is not easily reversible because it involves changes in chemical composition of substances.

An example of a chemical change is the combination of sodium hydroxide and hydrochloric acid according to the reaction equation;

HCl(aq) + NaOH (aq) -----> NaCl(aq) + H2O (l)

We easily notice the change in the chemical composition of each of the substances involved in the reaction.

Answer:

Rough and irregular surface

these surfaces tends a lot of friction

but on smooth surface there is least friction

hope it helps

Answer:

P = protons

E = electrons

N = neutrons

remember protons and neutrons (protons are positive and neutrons are neutral as you can already tell by their names) are found at the centre of the nucleus (positive mass). Whilst the electrons (negative) orbit around the shells

Answer:

True

Explanation:

Answer:No, the Cell Membrane does I'm pretty sure

Explanation:

Answer:

the volume occupied by 3.0 g of the gas is 16.8 L.

Explanation:

Given;

initial reacting mass of the helium gas, m₁ = 4.0 g

volume occupied by the helium gas, V = 22.4 L

pressure of the gas, P = 1 .0 atm

temperature of the gas, T = 0⁰C = 273 K

atomic mass of helium gas, M = 4.0 g/mol

initial number of moles of the gas is calculated as follows;

[tex]n_1 = \frac{m_1}{M} \\\\n_1 = \frac{4}{4} = 1[/tex]

The number of moles of the gas when the reacting mass is 3.0 g;

m₂ = 3.0 g

[tex]n_2 = \frac{m_2}{M} \\\\n_2 = \frac{3}{4} \\\\n_2 = 0.75 \ mol[/tex]

The volume of the gas at 0.75 mol is determined using ideal gas law;

PV = nRT

[tex]PV = nRT\\\\\frac{V}{n} = \frac{RT}{P} \\\\since, \ \frac{RT}{P} \ is \ constant,\ then;\\\frac{V_1}{n_1} = \frac{V_2}{n_2} \\\\V_2 = \frac{V_1n_2}{n_1} \\\\V_2 = \frac{22.4 \times 0.75}{1} \\\\V_2 = 16.8 \ L[/tex]

Therefore, the volume occupied by 3.0 g of the gas is 16.8 L.

The volume occupied by 3.0 g of He is mathematically given as

V2=16.8L

Question Parameters:

If 4.0 g of helium gas occupies a volume of 22.4 L at 0 o C and a pressure of 1.0 atm, what volume does 3.0 g of H

Generally, the equation for the gas equation  is mathematically given as

PV=nRT

When the reacting mass is 3g

n2=3/4

n2=0.75

Therefore

V1/n1=V2/n2

Where

n1=1

[tex]V2=\frac{22.4*0.75}{1}[/tex]

V2=16.8L

Read more about volume

https://brainly.com/question/1578538

Answer:

sodium and magnesium

Explanation:

Answer:

gravity, magnetic, electrostatic

Answer:

%C = 54.53%

%H = 9.144%

%O = 36.32%

Explanation:

Step 1: Calculate the mass of each element in 1 mole of C₄H₈O₂

We will multiply the number of atoms by the molar mass of the element.

mC: 4 × 12.01 g = 48.04 g

mH: 8 × 1.007 g = 8.056 g

MO: 2 × 16.00 g = 32.00 g

Step 2: Calculate the mass of 1 mole of C₄H₈O₂

We will sum the previously calculated masses of the elements.

mC₄H₈O₂ = mC + mH + mO = 48.04 g + 8.056 g + 32.00 g = 88.10 g

Step 3: Calculate the percent composition of each element

We will use the following expression.

%Element = mElement / mCompound × 100%

%C = 48.04 g / 88.10 g × 100% = 54.53%

%H = 8.056 g / 88.10 g × 100% = 9.144%

%O = 32.00 g / 88.10 g × 100% = 36.32%

Answer:

2-propanol

Explanation:

From the given information

2 drops of an unknown sample were said to be placed in a test tube followed by the addition of 2 ml of ethanol then gentle mixing. They then initiate a further addition of  2 drops of potassium permanganate reagent (KMNO₄) to the test tube and mixed the contents of the test tube thoroughly. After adding 2 drops of potassium permanganate reagent, the reagent oxidizes the secondary alcohols(2-propanol) to ketone(i.e acetone) and no further reaction will take place since there are no reactive C-H bonds left. The diagram attached below shows how the reaction proceeds.

Answer:

60.86 g of PH₃

Explanation:

We'll begin by calculating the number of mole of H₂ that will occupy 60 L. This can be obtained as follow:

22.4 L = 1 mole of H₂

Therefore,

60 L = 60 / 22.4

60 L = 2.68 mole of H₂.

Next, we shall determine the number of mole of PH₃ produced by the reaction of 60 L (i.e 2.68 mole) of H₂. This can be obtained as follow:

P₄ + 6H₂ –> 4PH₃

From the balanced equation above,

6 moles of H₂ reacted to produce 4 moles of PH₃.

Therefore, 2.68 moles of H₂ will react to to produce = (2.68 × 4)/6 = 1.79 moles of PH₃.

Finally, we shall determine the mass of 1.79 moles of PH₃. This can be obtained as follow:

Mole of PH₃ = 1.79 moles

Molar mass of PH₃ = 31 + (3×1)

= 31 + 3 = 34 g/mol

Mass of PH₃ =?

Mass = mole × molar mass

Mass of PH₃ = 1.79 × 34

Mass of PH₃ = 60.86 g

Thus, 60.86 g of PH₃ were obtained from the reaction.

Answer:

1.96g H2

Explanation:

P4 = 123.9g/mol

H2 = 2.02g/mol

[tex]\frac{20g P_{4} }{1}[/tex] * [tex]\frac{1 mol P_{4} }{123.9g}[/tex] * [tex]\frac{6 mol H_{2} }{1 mol P_{4} }[/tex] * [tex]\frac{2.02g H_{2} }{1 mol H_{2} }[/tex] = 1.96g H2

Answer:

Explanation:

[tex]\text{From the information given:}[/tex]

[tex]\text{The chemical reaction is : } 4 KClO_{3(s)} \to 3 KClO_{4(s)} + KCl_{(s)}[/tex]

[tex]\text{To find} \ \Delta G^0_{rxn}\ \text{using the formula}: \\ \\ \Delta G^0_{rxn} = \sum n_p \times \Delta _f G^0 (Products) - \sum n_R \times \Delta _fG^0 ( Reactants) \\ \\ where; n_p = \text{no of moles of products } \ and; \\ \\ n_R = \text{no of moles of reactants }[/tex]

[tex]\implies G^0_{rxn} = 3 \times \Delta _fG^0 [KClO_4{(s)}] + \Delta_fG^0[KCl_{(s)}] - 4 \times \Delta _f G^0 [ KClO_3 (s) ][/tex]

[tex]\Delta _fG^0 \ values \ at \ 25^0 \ C (298 \ K) are\ given \ as:\\\\ \Delta _fG^0 [KClO_4(s)] = -303.09 \ kJ \\ \\ \Delta _fG^0 [KCl(s) ] = - 409.14 \ kJ \\ \\ \Delta_f G^0 [KClO_3_{(s)}] = -296.25 \ kJ \\ \\ replacing \ the \ above \ values \ into \ equation (1) ; then:\\ \\ \\\Delta G^0_{rxn} = 3 *(-303.09) + (-409.14) - 4*(-296.25) \ kJ \\ \\ = (-909.27 - 409.14 + 1185) \ kJ \\ \\ = -133.41 \ kJ \\ \\ \mathbf{\Delta G^0_{rxn} = -133.4 \ kJ }[/tex]

The standard free energy change of the reaction is -133 kJ.

From the reaction equation, we have; 4KClO3 ⇄ 3KClO4 (s) + KCl (s). The standard free energy of formation of each specie is given below;

ΔG°f KClO3 = -296.35 kJ

ΔG°f KClO4 = -303.09 kJ

ΔG°f KCl = -409.14 kJ

Hence;

ΔG°rxn = [3(-303.09)] + ( -409.14)] - [(4( -296.35))]

ΔG°rxn = (-909.27) + (-409.14) - (-1185.4)

ΔG°rxn = -133 kJ

Learn more about free energy: https://brainly.com/question/953809

Answer:

Hey mate......

Explanation:

This is ur answer.......

The largest star, and indeed the only star in our solar system, is the sun. The sun is a bit under a million miles across. About 110 Earths put side by side would equal the size of the sun. The sun has 99.8 percent of the mass of our solar system.

Hope it helps!

Mark me brainliest pls......

Follow me! :)

yes hahahahahahah......

Answer:

[tex]Cl_2+2NaI\rightarrow I_2+2NaCl[/tex]

Explanation:

Hello there!

In this case, according to the described chemical reaction, Cl2 replaces iodine in NaI in order to produce I2 and NaCl:

[tex]Cl_2+NaI\rightarrow I_2+NaCl[/tex]

It is possible to realize how chlorine replaces iodine in agreement with the single displacement reaction. Moreover, since chlorine and iodine atoms are not correctly balanced, we add a 2 in front of both NaI and NaCl in order to do so:

[tex]Cl_2+2NaI\rightarrow I_2+2NaCl[/tex]

Best regards!

The balanced single displacement reaction should be Cl2+2Nal→I2+2NaCl.

The C12 should be replaced with the iodine in Nal for generating the 12 and NaCl.

Also, the chlorine should replace the iodine in the agreement along with a single displacement reaction. Also, the chlorine and the iodine atoms should not be rightly balanced.

Therefore, The balanced single displacement reaction should be Cl2+2Nal→I2+2NaCl.

Learn more about reactions here: https://brainly.com/question/13625271

Answer:

Bro don't cheat in online exams bro

Answer: Igneous rocks may be simply classified according to their chemical/mineral composition as felsic, intermediate, mafic, and ultramafic, and by texture or grain size: intrusive rocks are course grained (all crystals are visible to the naked eye) while extrusive rocks may be fine-grained (microscopic crystals) or glass.

Explanation: Hope this helped! :)

Answer:

Igneous rocks may be simply classified according to their chemical/mineral composition as felsic, intermediate, mafic, and ultramafic, and by texture or grain size: intrusive rocks are course grained (all crystals are visible to the naked eye) while extrusive rocks may be fine-grained (microscopic crystals) or glass ( ...

Answer:

Explanation:

Answer:

This reaction will not occur since copper is less reactive than zinc.

Explanation:

Since copper is located at a lower position in the reactivity series than zinc, there will be no displacement reaction if copper is put into zinc (II) nitrate solution.

Answer:

Solubility  : The mass of a salt in grams that will dissolve in 100 mL of water

Saturated solution : A solution that has dissolved the maximum amount of a compound at a given temperature. Any further addition of salt will remain undissolved

Solubility product constant :The product of the molarities of the dissolved ions, raised to a power equal to the ion's coefficient in the balanced chemical equation

Common ion effect : A decrease in the solubility of an ionic compound as a result of the addition of a common ion

Molar solubility : The maximum number of moles of a salt that will dissolve in 1 L of solution

Explanation:

Solubility is expressed usually as the mass of solute per 100 grams or 100 ml of solvent.

Molar solubility of a solid is expressed as the concentration of the dissolved solid in a saturated solution.

Solubility product constant is defined as the equilibrium constant in which a solid ionic compound is dissolved to produce its ions in solution. It is represented as  

The common-ion effect is the decrease in solubility of a sparingly soluble salt by the addition to the solution of a soluble compound with an ion in common with the precipitate.

Saturated solution is defined as the solution in which no more solute particles can be dissolved in the solvent.

One of the basic engine-diagnostic procedures that can be run is an engine compression test. All of the cylinders must have the same compression for the engine to run smoothly. There are just three possible ways for air to leak out of an engine and cause compression loss.

The engine should be warmed to its typical operating temperature before testing in order to achieve the best results. The following procedures should be followed for an accurate compression test:

Learn more about compression test here https://brainly.com/question/13274092

#SPJ2

Answer:

660gx Imol = 2.1278 mol 310.189 2.5L 1.85 m).

Explanation:

The number of moles of 660 grams of calcium phosphate is 2.127. Then the molarity of the solution of 2.5 liter volume is 0.85 M.

Molarity is a common term used to express the concentration of a solution. It is the ratio of number of moles of solute particles to the volume of solution in liters. Hence, its unit is mol/L or molar.

The molarity of a solution is a colligative quantity as well as temperature dependent.

Given,

molar mass calcium phosphate,  Ca₃(PO₄)₂  =310.18 g/mol

Then,

no.of moles of calcium sulphate in 660 g = 660 g/310.18 g/mol = 2.127 moles

volume of solution = 2.5 L

Molarity = no.of moles of solute/ volume of solution in L

M = 2.127 moles/ 2.5 L

   = 0.85 M.

Therefore, the molarity of the given solution is 0.85 molar.

Find more on molarity:

brainly.com/question/8732513

#SPJ6

Answer:

The most reactive compound is: Phenol  because the electron donating character of the alcohol group increases the rate of the reaction.

The least reactive compound is nitrobenzene

because the electron withdrawing character of the nitro group decreases the rate of the reaction.

Explanation:

Answer:

Double-stranded/Double-stranded

Explanation:

The PCR which is popularly known as polymerase chain reaction is the technique that uses the single copy of DNA to make thousands or levels a huge number(in terms of millions) of duplicates of that DNA.  

The PCR is a laboratory procedure that is utilized to make various duplicates of a section of DNA as depicted previously. It is an unmistakable strategy.  

There are 3 fundamental advances in PCR:

Denaturing  

Annealing  

Extending  

In denaturing measure requires warming of the double-stranded DNA template to isolate it into a solitary strand. Eventually, it resulted into a double-stranded item.

Answer:

Antibiotic resistance happens when the germs no longer respond to the antibiotics designed to kill them. That means the germs are not killed and continue to grow. It does not mean our body is resistant to antibiotics.