AMA
H
+
0
-0-H
H
Single Bond
If you start using 10.0 grams of NaHCO3 and excess of acetic acid, how many moles of CO2 can be formed? How many grams of CO2 can be formed?
Answer:
[tex]n_{CO_2}=0.119molCO_2[/tex]
[tex]m_{CO_2}=5.24gCO_2[/tex]
Explanation:
Hello.
In this case, since the chemical reaction:
[tex]NaHCO_3+CH_3COOH\rightarrow CH_3COONa+H_2O+CO_2[/tex]
And 10.0 grams of sodium bicarbonate (molar mass = 84 g/mol) are reacting in a 1:1 mole ratio with the yielded carbon dioxide, those moles and grams turn out:
[tex]n_{CO_2}=10.0gNaHCO_3*\frac{1molNaHCO_3}{84gNaHCO_3} *\frac{1molCO_2}{1molNaHCO_3} =0.119molCO_2[/tex]
And the mass by considering the molar mass of carbon dioxide to be 44 g/mol:
[tex]m_{CO_2}=0.119molCO_2*\frac{44gCO_2}{1molCO_2} \\\\m_{CO_2}=5.24gCO_2[/tex]
Best regards.
If you start using 10.0 grams of sodium bicarbonate and excess of acetic acid, you can obtain 0.119 moles of CO₂ (5.24 g).
Let's consider the following neutralization reaction.
NaHCO₃ + CH₃COOH ⇒ CH₃COONa + H₂O + CO₂
First, we will convert 10.0 g of NaHCO₃ to moles using its molar mass (84.01 g/mol).
[tex]10.0 g \times \frac{1mol}{84.01g} = 0.119mol[/tex]
The molar ratio of NaHCO₃ to CO₂ is 1:1. The moles of CO₂ formed from 0.119 moles of NaHCO₃ are:
[tex]0.119 mol NaHCO_3 \times \frac{1molCO_2}{1molNaHCO_3} = 0.119 moles CO_2[/tex]
Finally, we will convert 0.119 moles of CO₂ to grams using its molar mass (44.01 g/mol).
[tex]0.119 mol \times \frac{44.01g}{mol} = 5.24 g[/tex]
If you start using 10.0 grams of sodium bicarbonate and excess of acetic acid, you can obtain 0.119 moles of CO₂ (5.24 g).
Learn more: https://brainly.com/question/9743981
A hydrated sample weighing 20.0 g is heated in a crucible at 250°C. After cooling the sample now has a weight of 16.5 g.
What is the weight of the water lost from the sample? ______________
If the % water in the sample = g waterg of original sample x 100, what is the % water in the sample?
Given parameters:
Weight of hydrated sample = 20g
Temperature = 250°C
Weight after cooling = 16.5g
Unknown:
Weight of water lost from the sample = ?
Solution:
The weight of water lost from the sample;
Weight of water lost = Weight of hydrated sample - Weight of dry sample
Weight of water lost = 20g - 16.5g = 3.5g
% of water in the sample = [tex]\frac{mass of water}{mass of original sample} x 100[/tex]
Input parameters solve;
= [tex]\frac{3.5}{20} x 100[/tex]
=17.5%
what I do when I need to eat
Which describes a characteristic of quartzite? Don't check all that apply.
igneous
foliated
does not split into layers
grains arranged in parallel layers
Answer:
the answer is " does not split into layers"
Explanation:
Quartzite is a non-foliated metamorphic rock and non-foliated rocks have their mineral grains arranged randomly.
Which statement best explains why heating a liquid affects its viscosity?
The molecules move faster at higher temperatures and overcome attractions more easily.
The molecules move faster at higher temperatures, and the attractions between them increase.
The molecules move slower at higher temperatures and overcome attractions more easily.
The molecules move slower at higher temperatures, and the attractions between them decrease.
Answer: The molecules move faster at higher temperatures and overcome attractions move easily.
Explanation: edgen. 2020
Answer:
It's A !
The molecules move faster at higher temperatures and overcome attractions more easily.
HOW DO ELECTROSTATIC FORCES GUIDE THE SHAPE OF A MOLECULE?
draw an energy diagram for an endothermic and exothermic reaction and label the diagram
The energy diagram for an endothermic reaction and exothermic reaction are attached in attachments below.
What are endothermic and exothermic reactions?An exothermic reaction is defined as a chemical reaction which involves release of energy in the form of light,heat .In these reactions, energy is transferred from system to surroundings rather than taking energy from surroundings into system as in endothermic reactions.
In an exothermic reaction,change in enthalpy is negative.Therefore, it can be inferred that net amount of energy which is required to start the exothermic reaction is less than the net amount which is released by the reaction.
An endothermic reaction is defined as a chemical reaction which is a thermodynamic process accompanied by an increase in enthalpy of the system.In this process, a system absorbs energy from the surroundings which is mainly thermal energy.
Learn more about endothermic and exothermic reactions,here:
https://brainly.com/question/10373907
#SPJ2
Why are human-powered generators the best energy source for the rescue team?
Answer:
Human powered generators are the best energy source for the rescue team as it doesn't require any lengthy time consuming resource but only the power of single human being. Just like fossil fuels, the human power is a kind of renewable energy source that does no harm to the environment and can be used whenever required.
Explanation:
I hope that helped.
I have snap chat if you need it.
Let me know if you need help with anything else.
Human powered generators are the best energy source for the rescue team because it doesn't require any lengthy time consuming resource but only the power of single human being.
why the Human-powered generators are the best energy source for the rescue team?Human powered generators are the best energy source for the rescue team because it doesn't require any lengthy time consuming resource but only the power of single human being. Just like the fossil fuels, human power is a kind of renewable energy source that does no harm to the environment and can be used whenever required.
The Rescue missions take place in day and night and as well in a different environment, which could be rainy or cloudy
Human-powered generators can be used to transfer energy into a battery at any time (rainy or sunny, night or day) someone is there to turn the crank.
Hence, it can be concluded that Human-Powered generators are the most reliable and the best for rescue teams.
Learn more about Human-powered generators;
https://brainly.com/question/18561415
#SPJ2
Antonio and his friend found a piece of metal which they want to identify. Here is what they figure out so far: Mass of this metal is 20g Volume of this metal is 2.35cm3
Answer:
The density of beryllium copper is 8.5 g/cm³ thus given metal is beryllium copper.
Explanation:
Given data:
Mass of metal = 20 g
Volume of metal = 2.35 cm³
Which metal is this = ?
Solution:
we will apply density formula to solve this problem.
d = m/v
d = density
m = mass
v = volume
d = 20 g/ 2.35 cm³
d = 8.5 g/cm³
The density of beryllium copper is 8.5 g/cm³ thus given metal is beryllium copper.
In a synthesis reaction, the elements Fe and S might react to form which of the following?
A. H20
B. FeS
C. Na and Cl
D. All of the above
Answer:
THE ANSWER IS A
Explanation:
In a synthesis reaction, the elements Fe and S might react to form FeS.
Given :
The elements Fe and S might react to form a product,
To find:
The product of the synthesis reaction.
Solution:
The synthesis reaction is a type of chemical reaction in which two more different substances are combined together to give a single product,
When iron (Fe) and sulfur react the product will be formed will have both iron atoms and sulfur atoms.
[tex]Fe+S \rightarrow FeS[/tex]
In a synthesis reaction, the elements Fe and S might react to form FeS.
Learn more about synthesis reaction here:
brainly.com/question/16987748?referrer=searchResults
brainly.com/question/8692058?referrer=searchResults
Gravity would cause the rain falling in which two locations to drain into the area B
Answer:
4 and 3
because i guessed
Gravity would cause the rain falling in (3) and (4) locations to drain into area B. thus these locations are most near to basin area B.
How does gravity affect rainfall?Through watersheds, gravity forces water to flow down on the land and precipitation to fall from clouds. The constant circulation of water between these reservoirs is powered by gravity and solar energy. The water turns from a liquid to a gas as it becomes hotter.
Rainfall can be significantly influenced by mountains. Air must rise to overcome this obstruction once it reaches the mountains. A mountain's windward side causes the air to cool and lose volume as it ascends. As a result, humidity rises, and precipitation and orographic clouds may form.
The image is attached below.
Therefore, these locations are most near basin area B.
Learn more about rainfall, here:
https://brainly.com/question/19671043
#SPJ5
The given question is incomplete, so the most probable complete question is attached in the image.
how many grams of S are in 665 g of SO2
Answer: 111g S
Explanation:
SO2 you have = 665 g
SO2 molar mass = 64.066 g/mol
S molar mass = 32.065 g/mol
[tex]665g SO2*\frac{1 molSO2}{64.066gSO2} *\frac{1molS}{3molSO2} * \frac{32.065gS}{1molS} = 110.944... ~ 111gS[/tex]
There are 332.5 grams of S (sulfur) in 665 g of SO2 ( sulfur dioxide).
From the information given:
The atomic mass of sulfur = 32 g/mol
The atomic mass of oxygen = 16 g/mol
∴
The molar mass for SO2 = 32 + (16 × 2) g/molThe molar mass for SO2 = 64 g/molSince there are 665g of SO2;
If 1 mole of SO2 contains 1 mole of S
It implies that:
(1 × 64)g of SO2 will contain (1 × 32) g of S;
∴
665 g of SO2 will contain :
[tex]\mathbf{= \Big ( \dfrac{1 \times 32}{1 \times 64} \times 665 \Big )}[/tex]
= [tex]\mathbf{\Big 332.5 \ grams \ of \ S \Big}[/tex]
Therefore, we can conclude that there are 332.5 grams of S present in 665 g of SO2.
Learn more about molar mass here;
https://brainly.com/question/12127540?referrer=searchResults
If you have six molecules of CO2how many oxygen atoms do you have?
1. Calculate the number of moles of oxygen atoms present in 1.50 mol of barium sulfate.
Answer:
[tex]n_O=6.00molO[/tex]
Explanation:
Hello.
In this case, since the molecular formula of barium sulfate is:
[tex]BaSO_4[/tex]
Which has four oxygen atoms, we can also say that one mole of barium sulfate has four moles of oxygen; in such a way, the moles of oxygen atoms in 1.50 moles of barium sulfate are:
[tex]n_O=1.50molBaSO_4*\frac{4molO}{1molBaSO_4} \\\\n_O=6.00molO[/tex]
Best regards.
Which of the following would be the
best tool to use when heating substances
for experiments?
A cardboard boxes
B. plastic beakers
C plastic test tubes
D. glass beakers
what happens to a rock that has rainwater entering its cracks and then freezing
Answer:
Physical weathering is caused by the effects of changing temperature on rocks, causing the rock to break apart.
Explanation:
Freeze-thaw occurs when water continually seeps into cracks, freezes and expands, eventually breaking the rock apart.
What substances make up an iron pot
Answer:
Iron
Explanation:
________ is a trend making computers ubiquitous?
Answer:
Pervasive computing, also called ubiquitous computing, is the growing trend of embedding computational capability (generally in the form of microprocessors) into everyday objects to make them effectively communicate and perform useful tasks in a way that minimizes the end user's need to interact with computers as ...
Explanation:
In the 17th century, British biologist Robert Hooke discovered the cell. A little more than a century later, French botanist René Henri Dutrochet concluded that all living things arise from cells, and all cells are derived from other cells. Dutrochet's proposal indicates that —
A
cells are the highest level of organization in a living organism.
B
cells are not a level of organization in a living organism.
C
cells alternate between being the highest and lowest level of organization in a living organism.
D
cells are the lowest level of organization in a living organism.
Answer: A
Explanation:
Robert Hooke discovered the cell. Cells are the highest level of organization in a living organism. so, option A is correct.
What is cell ?Cell is the smallest unit that can sustain life on its own and makes up all living things, including the body's tissues. It is a small unit of organism containing nucleus.
The cell membrane, the nucleus, and the cytoplasm are the three primary components of a cell. The cell membrane encloses the cell and regulates how substances enter and exit the cell.
After using a very early microscope to examine a piece of cork, Robert Hooke proposed the name "cell" in 1665, derived from the Latin cella, which means "storeroom or chamber." It is also claimed that he believed the rectangular chambers to resemble some monastic cells.
Thus, option A is correct.
To learn more about cell refer the link below;
https://brainly.com/question/3142913
#SPJ2
What is the difference between A and B? In your answer, describe the state of matter in each picture AND the key property of gas being shown.
For A it seems that the molecules are freely moving around and vibrating as well- indicates liquid. At B, the molecules are rigid with very less energy - indicating solid.
TCDD, also called dioxin (C12H4Cl4O2, molar mass 322.0 g/mol), is a potent poison. The average lethal dose in humans is estimated to be 3.0 × 10−2 mg per kg of body weight. (a) How many grams constitute a lethal dose for a 84−kg individual?(b) How many molecules of TCDD does this correspond to?
Answer:
The correct solution is "3.535 × 1018 molecules".
Explanation:
The given values are:
Molar mass
= 322.0 g/mol
Dioxin constitute to 63 kg individual will be:
= [tex]0.03 \ mg\times 63[/tex]
= [tex]1.89 \ mg[/tex]
⇒ [tex]mole=\frac{mass}{molar \ mass}[/tex]
[tex]=\frac{ 1.89\times 10^{-3}}{322}[/tex]
[tex]=5.87\times 10^{-6} \ mol[/tex]
So,
The number of molecules will be:
= [tex]mole\times Na[/tex]
= [tex]5.87\times 10^{-6}\times 6.022\times 1023[/tex]
= [tex]3.535\times 1018[/tex] (molecules)
The energy change in an endothermic reaction is:
A. Internal
B. Positive
C. External
D. Negative
Thank you so much for helping !
The energy change in an endothermic reaction is internal. Hence, option A is correct.
What is an endothermic reaction?Endothermic reactions are chemical reactions in which the reactants absorb heat energy from the surroundings to form products.
A reaction or process in which heat is transferred to a system from its surroundings is endothermic.
The first law of thermodynamics states that the energy of the universe is constant.
The change in the internal energy of a system is the sum of the heat transferred and the work done.
Hence, option A is correct.
Learn more about the endothermic reaction here:
https://brainly.com/question/23184814
#SPJ2
A pumpkin has a volume of 10 cm3 and a mass of 8g. What is the density of the pumpkin
Answer:
Volume (v) = 10 cm^3
Mass (m) = 8g = 8/1000 kg = 0.008 (SI unit of mass is kg)
Density (D) = ?
Now,
D = m/v = 0.008/10 = 0.0008
What law do we use to balance chemical equations? What does that law say?
Answer:
Hello
Law of conservation of mass
The law of conservation of mass states that matter cannot be created or destroyed in a chemical reaction.
Explanation:
Which atom has only one pair of electrons in its outermost energy level?
a. Boron b. carbon c. nitrogen d. oxygen
Answer:
i belive A, i cold be wrong tho, pls tell me if im right if you fully find out
ght. Explanation:
If Brian and his scooter had a mass of 50 kg, how much force would it take for him to accelerate at 0.8 m/s2
Answer:
The answer is 40 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × accelerationFrom the question
mass = 50 kg
acceleration = 0.8 m/s²
We have
Force = 50 × 0.8
We have the final answer as
40 NHope this helps you
what piece of equipment changes the signal from the television camera into an electric signal?
Answer:
The transponder
Explanation:
Answer:
Transducer
Explanation:
Transponder was incorrect and made me lose points on the test.
Why do scientists look for patterns in the world?
A. Patterns never change, no matter what.
B. Patterns can help explain observations.
O C. Patterns are easy for scientists to detect.
D. Patterns are all the same, through all time.
Answer:
B. Patterns can help explain observations.
Explanation:
Hope this helps
Answer:
B. Patterns can help explain observations.
Explanation:
a p e x 2021 :) Have a nice day everyone!
What is the chemical formula for tetraiodine heptafluoride?
Answer:
Tetra iodine nonoxide (I₄O₉) IF₇
Explanation:
Tetraiodine nonoxide (I4O9) was formulated but not thoroughly researched for the gas-phase combination of I2 with O3. The chemical substance is iodine pentoxide with either the equation I2O5. The anhydride of iodic acids and the only secure oxide of iodine however is iodine oxide.
Ratio of hydrogen chloride
Answer:
Each molecule of HCl is composed of a one-to-one ratio of hydrogen and chlorine.
Explanation: