Placing an alcoholic beverage in a freezer will not result in a solid, frozen product because the freezing point of ethanol is very low.
Alcoholic beverages are defined as any fermented liquor, such as wine, beer, or distilled spirits, that contains ethyl alcohol, or ethanol (CH₃CH₂OH), as an intoxicating agent.
When we place alcohol in a freezer it often does not get frozen. This happens because we can't get it cold enough. Generally the freezing point of ethanol (the main component of alcohol) is -114 C or (-173 F). And our home freezer probably doesn't go below -20 F at its best.
Learn more about ethanol from the link given below.
https://brainly.com/question/28487809
#SPJ4
Which of the following is a mineral?Group of answer choicesmaterial with crystals of different chemical compoundsNone of these choices are correct.volcanic glasscrystals grown in a laboratoryice
Answer: I don't have an answer,
Explanation: You have terrible spelling and pronunciation
An oxide of tin crystallizes with the following unit cell (where tin = gray and oxygen = red)
Tetragonal crystalline structure is shared by several other metal oxides, including the mineral tin dioxide, often known as stannic oxide or cassiterite (SnO 2).
What is the unit cell in An oxide of tin crystallizes?The tetragonal unit cell of SnO 2's rutile structure possesses P4 2 /mnm space-group symmetry and lattice constants of a = b = 4.7374 and c = 3.1864 [13].
When we look at this unit cell, we can tell that the titanium is the block. The lead is blue, which equals 123456 and P. B. 6. As a result, there is one titanium since there are six lead. P B six T. I., then.
therefore, The red is oxygen after that. We may also observe that we have 1234 Last 678 liters of oxygen. Thus, it should be 08. So, the formula for this unit cell is as follows. The number would be PB 6 Ki I-08.
Learn more about unit cell here:
https://brainly.com/question/13110055
#SPJ1
the density of copper decreases as temperature increases. which statement accurately describes the changes in a sample of copper when it is warmed from room tempereature to 7b c
The statement that is accurately describes the changes in the sample of copper when it is warmed from the room temperature to 95° Celsius is the correct option is c. The sample will expand.
The density is expressed as follows :
The Density = mass / volume
The density is define as the mass of the sample per unit volume. It is clear from the above equation that the density is directly proportional to the mass and the volume is inversely proportional to the density. Therefore the sample will expand if the density of the sample decreases as the temperature increases.
To learn more about density here
https://brainly.com/question/29775886
#SPJ4
This question is incomplete, the complete question is :
The density of copper decreases as temperature increases. Which statement accurately describes the changes in a sample of copper when it is warmed from room temperature to 95° Celsius?
a. The sample will become lighter.
b. The sample will become heavier.
c. The sample will expand.
d. The sample will contract.
please help me with it
The mass of CaCO₃ can be obtained as follow:
Molar mass of CaCO₃ = 100.09 g/mol Mole of CaCO₃ = 1.23 moleMass of CaCO₃ = ?Mole = mass / molar mass
1.23 = Mass of CaCO₃ / 100.09
Cross multiply
Mass of CaCO₃ = 1.23 × 100.09
Mass of CaCO₃ = 123.11 g
How do I determine the mole?The mole of C₁₂H₂₂O₁₁ can be obtained as follow:
Molar mass of C₁₂H₂₂O₁₁ = 342.34 g/mol Mass of C₁₂H₂₂O₁₁ = 65.32 g Mole of C₁₂H₂₂O₁₁ =?Mole = mass / molar mass
Mole of C₁₂H₂₂O₁₁ = 65.32 / 342.34
Mole of C₁₂H₂₂O₁₁ = 0.19 mole
How do I determine the mole?The mole of Ba₃(PO₄)₂ can be obtained as follow:
Molar mass of Ba₃(PO₄)₂ = 601.93 g/mol Mass of Ba₃(PO₄)₂ = 146 g Mole of Ba₃(PO₄)₂ =?Mole = mass / molar mass
Mole of Ba₃(PO₄)₂ = 146 / 601.93
Mole of Ba₃(PO₄)₂ = 0.24 mole
How do I determine the mass?The mass of F₂ can be obtained as follow:
Molar mass of F₂ = 38 g/mol Mole of F₂ = 3.25 molesMass of F₂ = ?Mole = mass / molar mass
3.25 = Mass of F₂ / 100.09
Cross multiply
Mass of F₂ = 3.25 × 38
Mass of F₂ = 123.5 g
How do I determine the mole?The mole of Mg(OH)₂ can be obtained as follow:
Molar mass of Mg(OH)₂ = 58.87 g/mol Mass of Mg(OH)₂ = 760 g Mole of Mg(OH)₂ =?Mole = mass / molar mass
Mole of Mg(OH)₂ = 760 / 58.87
Mole of Mg(OH)₂ = 12.91 moles
How do I determine the mass?The mass of Fe₂O₃ can be obtained as follow:
Molar mass of Fe₂O₃ = 159.7 g/mol Mole of Fe₂O₃ = 0.234 moleMass of Fe₂O₃ = ?Mole = mass / molar mass
0.234 = Mass of Fe₂O₃ / 159.7
Cross multiply
Mass of Fe₂O₃ = 0.234 × 159.7
Mass of Fe₂O₃ = 37.37 g
Learn more about mass:
https://brainly.com/question/21940152
#SPJ1
The chemical symbols of several elements are provided. Give the corresponding name of the element. Spelling counts. K: ___Mn: __Ge: ___Kr____
The chemical names are, K: Potassium, Mn: Manganese, Ge: Germanium, Kr: Krypton.
Chemical symbols are shorthand notations used to represent the chemical elements in a concise and standardized manner. They consist of one or two letters, usually derived from the name of the element, and are used in chemical formulas, equations, and other types of chemical notation.
For example, the symbol K represents the element potassium, which has an atomic number of 19 and a chemical symbol of K derived from its Latin name kalium. Similarly, Mn represents the element manganese, which has an atomic number of 25 and a symbol derived from its Greek name magnesia.
To know more about the chemical symbols, here
brainly.com/question/29285074
#SPJ4
--The complete question is, The chemical symbols of several elements are provided. Give the corresponding name of the element.
K
Mn
Ge
Kr--
Calculate the number of particles in 5.5g of Mn
According to the concept of Avogadro's number, there are 0.60×10²³ number of particles in 5.5 g of manganese.
What is Avogadro's number?Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.
It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .
It is calculated as, 5.5/ 54.93×6.023×10²³=0.60×10²³ particles.
Learn more about Avogadro's number,here:
https://brainly.com/question/24175158
#SPJ9
TRUE/FALSE. At the atomic scale, elastic deformation corresponds to breaking of interatomic bonds whereas plastic deformation corresponds to stretching of interatomic bonds.
It is false that, At the atomic scale, elastic deformation corresponds to breaking of interatomic bonds whereas plastic deformation corresponds to stretching of interatomic bonds.
What is elastic deformation?
Elastic deformation is the temporary shape change that occurs when a material is subjected to a force. It is a reversible process that returns to its original shape when the force is removed. This type of deformation is seen in materials such as rubber, metal and wood.
Therefore, It is false that, At the atomic scale, elastic deformation corresponds to breaking of interatomic bonds whereas plastic deformation corresponds to stretching of interatomic bonds.
To learn more about elastic deformation
Here: https://brainly.com/question/18375198
#SPJ4
for the reaction shown, find the limiting reactant for each of the following initial amounts of reactants.
The limiting reactant depends on the relative amounts of Al and O2 and can be determined by converting the amounts to the same unit and comparing them to the stoichiometric ratio in the balanced equation.
The Explanation for Each ScenarioIn this case, both Al and O2 are in excess: meaning neither is the limiting reactant.This question should be provided as:
For the reaction shown, find the limiting reactant for each of the following initial amounts of reactants.
4Al(s)+3O2(g)?2Al2O3(s)In which is Al limiting and which is O2 limiting?
1 mole Al and 1 mole O24 mole Al and 2.6 mole O211.4 mole Al and 9.5 mole O224 mole Al and 19 mole O2Learn more about limiting reactant brainly.com/question/14222359
#SPJ4
you have isolated a decapeptide (a 10-residue peptide) called fp, which has anticancer activity. determine the sequence of the peptide from the following information. (note that amino acids are separated by commas when their sequence is not known.) (a) one cycle of edman degradation of intact fp yields 2 mol of pth-aspartate per mole of fp. (b) treatment of a solution of fp with 2-mercaptoethanol followed by the addition of trypsin yields three peptides with the composition (ala, cys, phe), (arg, asp), and (asp, cys, gly, met, phe). the intact (ala, cys, phe) peptide yields pth-cysteine in the first cycle of edman degradation. (c) treatment of 1 mol of fp with carboxypeptidase (which cleaves the c-terminal residue from peptides) yields 2 mol of phenylalanine. (d) treatment of the intact pentapeptide (asp, cys, gly, met, phe) with cnbr yields two peptides with the composition (homoserine lactone, asp) and (cys, gly, phe). the (cys, gly,phe) peptide yields pth-glycine in the first cycle of edman degradation.
Due to its simplicity of use and high-throughput operations, liquid chromatography-mass spectrometry (LC-MS) is a widely used technique for determining peptide sequences.
What is meant by LC-MS?Liquid chromatography-mass spectrometry is an analytical chemistry method that combines the mass spectrometric mass analysis skills with the physical separation capabilities of liquid chromatography. A method used in laboratories to separate, identify, and quantify the concentration of several compounds in a liquid sample by combining two distinct processes.Liquid chromatography (LC) can be used to separate the components, and the sample eluents from LC are then carried into mass spectrometry (MS), where the detection, identification, and measurement of the masses of the components can be done while other components are present.The components within each peak are then recognised and detected using the mass spectra of those components. Using LC-MS, mixtures are separated depending on their physical and chemical features.To learn more about LC-MS, refer to:
https://brainly.com/question/16105508
#SPJ4
4. Based on the data below, what is the average atomic mass of chromium?
Isotope
Cr-50
Cr-52
Cr-53
Cr-54
OA. 52.000
OB. 52.250
OC. 52.057
OD. 52.925
Percentage
4.3
83.8
9.5
2.4
52.057g/mole is the average atomic mass of chromium. The correct option is option C among all the given options.
What is average atomic mass?Meaning of Average Atomic Mass: To be more specific, the average atomic mass is defined as "the sum of the atomic masses of any and all isotopes of a particular element, each calculated by respective natural abundance on Earth." This is a straightforward explanation of average atomic weight.
The mass of such an atom is measured by its atomic weight (ma or m). Although the kilogram (symbol: kg) is the SI unit of mass, atomic mass is frequently stated inside the non-SI unit Dalton (symbol: Da) - equivalently, united atomic mass unit (u).
average atomic mass = 50×4.3 + 52×83.8 + 53×9.5 + 54×2.4= 52.057g/mole
Therefore, 52.057g/mole is the average atomic mass of chromium. The correct option is option C.
To know more about average atomic mass, here:
https://brainly.com/question/13753702
#SPJ9
The skin burn when an ant bites why.
Answer:
ants release a chemical called formic acid onto your skin when they bite
select all of the factors that affect the rate of a chemical reaction. check all that apply a. amount of enzyme b. amount of enzyme substrate concentration c. substrate concentration ph of the reaction environment d. ph of the reaction environment e. temperature of the reaction environment
From given options, A, B, C, and D are all valid responses because they are all circumstances that can impact an enzyme's activity.
Enzyme catalyzed reaction Molecules move more quickly as a result of a rise in temperature, which increases the likelihood of collisions between substrates and enzymes and, ultimately, elevates enzymatic activity. As a result, there are fewer collisions and fewer enzymatic reactions as a result of a drop in temperature rather than a rise in the velocity of these molecules. Due to the ability of charges on the enzyme's amino acids to alter with pH, a change in the pH of the environment in which the enzyme is present may result in a change in the shape of the enzyme. This could change the enzyme's active site, improving or decreasing the enzyme's ability to bind substrate.For more information on rate of reaction kindly visit to
https://brainly.com/question/30546888
#SPJ1
the overall photosynthesis reaction is , 6 CO2 (g) + 6 H2O (l) ? C6H12O6 (s) + 6 O2 (g) ?H° = +2802 kJ
suppose that the reaction is at equilibrium. state the effect that each of the following changes will have on the equilibrium composition: tends to shift toward the formation of reactants, tends to shift toward the formation of products, or has no effect. (a) the partial pressure of is increased. (b) the system is compressed. (c) the amount of is increased. (d) the temperature is increased. (e) some of the is removed. (f) water is added. (g) the partial pressure of is decreased.
a) If the partial pressure of CO2 is increased, the equilibrium will tend to shift towards the formation of products (C6H12O6 and O2) to reduce the concentration of CO2.
(b) If the system is compressed, the equilibrium will tend to shift towards the formation of products (C6H12O6 and O2) to reduce the number of gas molecules.
What is Equilibrium?
In chemistry, equilibrium is a state in a chemical reaction where the rate of the forward reaction is equal to the rate of the reverse reaction. At equilibrium, the concentrations of the reactants and products remain constant over time, although the reactants are still being converted into products and vice versa.
When a system is at equilibrium, the concentrations of reactants and products are said to be in balance. This means that the concentrations of the reactants and products are no longer changing, even though the reaction is still ongoing. At equilibrium, the concentrations of reactants and products are related by a constant called the equilibrium constant (K), which depends on the specific reaction conditions such as temperature and pressure.
c) If the amount of H2O is increased, the equilibrium will tend to shift towards the formation of products (C6H12O6 and O2) to consume the excess water.
(d) If the temperature is increased, the equilibrium will tend to shift towards the formation of products (C6H12O6 and O2) because the reaction is endothermic and increasing the temperature favors the endothermic reaction.
(e) If some of the O2 is removed, the equilibrium will tend to shift towards the formation of products (C6H12O6 and O2) to compensate for the loss of O2.
(f) If water is added, the equilibrium will tend to shift towards the formation of reactants (CO2 and H2O) to consume the excess water.
(g) If the partial pressure of O2 is decreased, the equilibrium will tend to shift towards the formation of reactants (CO2 and H2O) to compensate for the loss of O2.
Learn more about Equilibrium from given link
https://brainly.com/question/517289
#SPJ4
. which statement best describes how to choose the most suitable solvent to purify a solid by recrystallization
The compound to be purified must be soluble in the hot solvent and insoluble in the cold solvent. This is because during recrystallization, the compound is dissolved in the hot solvent to remove impurities, and then cooled to allow the compound to crystallize out of solution. If the compound is insoluble in the cold solvent, it will form pure crystals while impurities remain in solution. So the correct option is D.
Choosing the right solvent for recrystallization is crucial to ensure that the process is effective in purifying the compound. The solvent must be able to dissolve the compound at high temperatures to remove impurities, but then allow the compound to crystallize out of solution as the solvent cools.
By selecting a solvent in which the compound is soluble at high temperatures but insoluble at low temperatures, pure crystals of the compound can be obtained.
The complete question is given below
"
Which statement below best describes the reasoning behind choosing the most
suitable solvent to purify a sold by recrystalization ? Clearly choose one answer.
a) The compound to be purified must be soluble in both the hot solvent and the
cold solvent.
b) The compound to be purified must be insoluble in both the hot solvent and
the cold solvent.
c) The compound to be purified must be insoluble in the hot solvent and
soluble in the cold solvent.
d) The compound to be purified must be soluble in the hot solvent and
insoluble in the cold solvent.
"
You can learn more about recrystallization at
https://brainly.com/question/16835395
#SPJ4
Calculate ka for weak acid HA which has a pH of 3.65 at 0.30 concentration.
Answer:
the Ka value for the weak acid HA is 1.18 x 10^(-7).
Explanation:
The pH of a weak acid solution can be related to the dissociation constant, Ka, of the acid through the following equation:
pH = pKa + log([A-]/[HA])
where pH is the measured pH of the solution, pKa is the negative logarithm of the acid dissociation constant, [A-] is the concentration of the conjugate base of the acid, and [HA] is the concentration of the undissociated acid.
In this problem, we are given the pH and the concentration of the weak acid, HA. We need to find the value of Ka.
First, we can rearrange the above equation to solve for pKa:
pKa = pH - log([A-]/[HA])
Next, we need to find the concentration of the conjugate base, [A-]. Since HA is a weak acid, we can assume that only a small fraction of it has dissociated into A- and H+ ions. At equilibrium, the concentration of A- can be assumed to be equal to the concentration of H+ ions produced by the dissociation of HA. We can calculate this concentration from the pH:
[H+] = 10^(-pH) = 10^(-3.65) = 2.24 x 10^(-4) M
Therefore, [A-] = 2.24 x 10^(-4) M.
We can now substitute the values we have calculated into the equation for pKa to obtain:
pKa = 3.65 - log(2.24 x 10^(-4)/0.30) = 3.65 + 2.47 = 6.12
Finally, we can calculate the Ka value from the pKa:
Ka = 10^(-pKa) = 10^(-6.12) = 1.18 x 10^(-7)
Therefore, the Ka value for the weak acid HA is 1.18 x 10^(-7).
Answer:
the Key value for the weak acid HA is 1.18 x 10^(-7).
Explanation:
The pH of a weak acid solution can be related to the dissociation constant, Key, of the acid through the following equation:
pH = pKa + log([A-]/[HA])
where pH is the measured pH of the solution, pKa is the negative logarithm of the acid dissociation constant, [A-] is the concentration of the conjugate base of the acid, and [HA] is the concentration of the UN dissociated acid.
In this problem, we are given the pH and the concentration of the weak acid, HA. We need to find the value of Ka.
First, we can rearrange the above equation to solve for pKa:
pKa = pH - log([A-]/[HA])
Next, we need to find the concentration of the conjugate base, [A-]. Since HA is a weak acid, we can assume that only a small fraction of it has dissociated into A- and H+ ions. At equilibrium, the concentration of A- can be assumed to be equal to the concentration of H+ ions produced by the dissociation of HA. We can calculate this concentration from the pH:
[H+] = 10^(-pH) = 10^(-3.65) = 2.24 x 10^(-4) M
Therefore, [A-] = 2.24 x 10^(-4) M.
We can now substitute the values we have calculated into the equation for pKa to obtain:
pKa = 3.65 - log(2.24 x 10^(-4)/0.30) = 3.65 + 2.47 = 6.12
Finally, we can calculate the Ka value from the pKa:
Ka = 10^(-pKa) = 10^(-6.12) = 1.18 x 10^(-7)
Therefore, the Ka value for the weak acid HA is 1.18 x 10^(-7).
What quantity of moles of C are formed upon complete reaction of 2 mol of B according to the generic chemical reaction: A + 2B = C
1 mole of C are formed upon complete reaction of 2 mol of B according to the generic chemical reaction.
What is moles?In the International System of Units, the mole (sign mol) is the unit of material quantity (SI). The amount of material is a measurement that indicates how many elementary constituents of a certain substance are present inside of an object or sample.
The mole has been defined as having 6.022×10²³ basic entities. An elementary entity can be an atom, chemical molecule, an ion, and ion pair, or perhaps a subatomic particle like an electron, depending on the substance.
A + 2B → C
moles of B = 2
the mole ratio between C and B is 1:2
moles of C= 1 mole
Therefore, 1 mole of C are formed upon complete reaction of 2 mol of B according to the generic chemical reaction.
To learn more about moles, here:
https://brainly.com/question/15209553
#SPJ6
if we formed 39.5 grams of water the reaction has occurred what volume of oxygen gas was burned initially
To calculate the initial volume of oxygen gas burned in the reaction, we need to use the stoichiometry of the reaction, which relates the amounts of reactants and products based on their balanced chemical equation.
To find the initial volume of oxygen gas burned in the reaction, we need to use stoichiometry to relate the amounts of reactants and products. The balanced chemical equation for the combustion of hydrogen gas and oxygen gas to form water tells us that for every 1 mole of O2 consumed, 2 moles of H2O are produced.
We can use this ratio to convert the mass of water produced to the number of moles of O2 consumed. Finally, we can use the ideal gas law to calculate the initial volume of O2 consumed. Using STP of 0°C and 1 atm, we find that the initial volume of O2 burned in the reaction was about 24.3 liters.
You can learn more about mass of water at
https://brainly.com/question/26173436
#SPJ4
A small amount of acetonitrile (CH3CN) is dissolved in a large amount of formaldehyde (H2CO). Imagine separating this process into the four stages sketched below. (These sketches show only a portion of the substances, so you can see the density and distribution of atoms and molecules in them.) CH^CN H2CO solution Use these sketches to answer the questions in the table below The enthalpy of solution ?1.0 CH3CN dissolves in formaldehyde. Use this information is positive when | ? to list the stages in order of increasing enthalpy absorbed released neither absorbed nor released Would heat be absorbed or released if the system moved from Stage A to B? none ionic bonding force covalent bonding force metal bonding force hydrogen-bonding force dipole force ion-dipole force dispersion force What force would oppose or favor the system moving from Stage A to B? Check all that apply
The order is d, a e c 4 h, 2 heat is absorbed, heat is a part, 3 dipole force And dispersion force.
H2CO is a polar molecule and will have both dipole-dipole forces and London dispersion forces while CH3CH3 is a non-polar molecule and will Only have London dispersions forces.
The intermolecular forces present for the molecules given are the London Dispersion forces and the dipole-dipole forces. The London Dispersion Forces exist for all molecules. Therefore, it will exist between H2O H 2 O And CH3CN C H 3 C N .
To learn more about dipole force & dispersion force
https://brainly.com/question/14958417
#SPJ4
(A) H2SO3 (B) SO3/ Which of the following reagent(s) can be used to convert nitrobenzene to m-nitrobenzenesulfonic acid Fe (C) H2SO3/Fe (D) H2SO4/Al2(SO4)3 (E) H2SO4.SO3
The reagent that can be used to convert nitrobenzene to m-nitrobenzenesulfonic acid is (A) H2SO3.
The conversion of nitrobenzene to m-nitrobenzenesulfonic acid involves the introduction of a sulfonic acid group (-SO3H) at the meta position of the benzene ring. This can be achieved by treating nitrobenzene with a sulfonating agent such as sulfuric acid (H2SO4) or sulfuryl chloride (SO2Cl2).
However, in the given options, only reagent (A) H2SO3 is a sulfonating agent. When nitrobenzene is treated with H2SO3, it undergoes sulfonation at the meta position to form m-nitrobenzenesulfonic acid. The reaction can be represented as follows:
NO2C6H5 + H2SO3 → NO2C6H4SO3H + H2O
None of the other reagents listed are capable of sulfonating nitrobenzene to form m-nitrobenzenesulfonic acid.
Learn more about reagent here:
https://brainly.com/question/28463799
#SPJ4
which of the following is the correct wedge and dash conformation for the following newman projection g
The correct wedge and dash conformation for the following Newman projection is: IV
What are wedge and dash conformation?The 3D structure of organic molecules is depicted using the wedge and dash conformation. It is frequently used in organic chemistry to display how substituents are oriented around chiral centers. The atoms in this conformation are dots, and the bonds in the molecule are represented by lines. Dashes and wedges depict bonds entering and exiting the paper's or screen's plane, respectively. The atoms' three-dimensional configuration can then be seen by rotating the molecule and looking at the direction of the bonds. Dashes denote the substituent is down and below the ring, whereas wedges denote the substituent is up and above the rings. Predicting the stereochemistry of chemical processes is made easier with the use of this notation.
To know more about wedge and dash conformation, check out:
https://brainly.com/question/20436961
#SPJ1
S + 6 HNO3 --> H2SO4 + 6 NO2 + 2 H2O
In the above equation how many moles of water can be made when 177.3 grams of HNO3 are consumed?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:
Element
Molar Mass
Hydrogen
1
Nitrogen
14
Sulfur
32
Oxygen
16
Answer:
sulfur. 14.
Explanation:
ccbhh Ivonne
Answer:
sulfur. 14.
ccbhh Ivonne
Explanation:
Which of the following will increase the rate of dissolution of a gas in a liquid?
a
decrease pressure
b
increase temperature
c
decrease agitation
(30 points)
Answer:
the answer is C. decrease agitation
How many calories of heat (energy) would it take to heat 23.0 g of water from 35.0 °C to 59.0 °C?
q= cal
How many kilocalories of heat (energy) would it take to heat 107.0 g of water from 23.0 °C to 85.0 °C?
q= kcal
24940 kcal ,calories of heat (energy) would it take to heat 23.0 g of water from 35.0 °C to 59.0 °C.
What are calories in food?Calories are the amount of energy released when your body breaks down (digests and absorbs) food. The more calories a food has, the more energy it can provide to your body. When you eat more calories than you need, your body stores the extra calories as body fat.
How to burn calories?Moderate aerobic exercise includes activities such as brisk walking, biking, swimming and mowing the lawn. Vigorous aerobic exercise includes activities such as running, heavy yardwork and aerobic dancing. Strength training. Do strength training exercises for all major muscle groups at least two times a week.
To know more about calories visit
https://brainly.com/question/14213632
#SPJ1
Nitric oxide, NO, is made from the oxidation of NH3, and the reaction is represented by the equation 4NH3 + 5O2 → 4NO + 6H2O An 8.9-g sample of NH3 gives 12.0 g of NO. The percent yield of NO is .
Answer:
≈ 177.7%
Explanation:
To calculate the percent yield of NO, we need to compare the actual yield (what was obtained in the experiment) to the theoretical yield (what should have been obtained if the reaction had gone to completion).
First, we need to determine the theoretical yield of NO. We can do this by using stoichiometry to convert the given mass of NH3 to the expected mass of NO, based on the balanced equation. The ratio of the coefficients in the balanced equation tells us that 4 moles of NH3 produce 4 moles of NO, so the mole ratio of NH3 to NO is 1:1. Therefore, the mass of NO that should be produced is:
12.0 g NO = (8.9 g NH3) × (1 mole NO / 4 moles NH3) × (30.01 g NO / 1 mole NO)
where we have used the molar mass of NO (30.01 g/mol) to convert from moles of NO to grams of NO. Evaluating this expression gives:
12.0 g NO = 6.748 g NO
So, the theoretical yield of NO is 6.748 g.
To calculate the percent yield, we use the following formula:
percent yield = (actual yield / theoretical yield) × 100%
Substituting the given values, we get:
percent yield = (12.0 g / 6.748 g) × 100% ≈ 177.7%
This result suggests that the actual yield is greater than the theoretical yield, which is not possible. The most likely explanation is that there was an error in the experiment, such as incomplete reaction, loss of product during handling, or inaccurate measurement of the masses. Therefore, we should check the experimental procedure and repeat the experiment to obtain a more reliable result.
Correctly classify each of the following compounds as highly soluble or as either slightly soluble or insoluble in water. Drag the appropriate compounds to their respective bins NaCl CHCl3 CH2OH KOH C5H5 C6H24 KNO3 CCl4 Na2SO4 CH2CH2OH CH2Cl2 CH3COOH CH3(CH2)5OH Highly Soluble Slightly soluble or insoluble
NaCl, KOH, C5H5, C6H24, KNO3, Na2SO4, CH2CH2OH are highly soluble in water and CHCl3, CH2OH, CCl4, CH2Cl2, CH3COOH, and CH3(CH2)5OH are either slightly soluble or insoluble in water.
The solubility of a compound in water refers to the ability of that compound to dissolve in water. Compounds that are highly soluble in water can easily dissolve in water, while those that are slightly soluble or insoluble cannot dissolve or dissolve only to a limited extent.
The solubility of a compound in water depends on several factors, including the chemical structure of the compound, the temperature and pressure of the solvent, and the presence of other solutes in the solvent.
Some common examples of highly soluble compounds in water include ionic compounds such as sodium chloride and potassium hydroxide, while nonpolar compounds such as chloroform and carbon tetrachloride are generally insoluble in water.
To know more about soluble here
https://brainly.com/question/24285799
#SPJ4
which one of the following statements about the following reaction is false? ch4(g) 2o2(g) ----------------- co2(g) 2h2o(g) Every methane molecule that reacts produces two water molecules.
If 32.0 g of oxygen reacts with excess methane, the maximum amount of carbon dioxide produced will be 22.0 g.
If 11.2 liters of methane react with an excess of oxygen, the volume of carbon dioxide produced at STP is (44/16)(11.2) liters.
If 16.0 g of methane react with 64.0 g of oxygen, the combined masses of the products will be 80.0 g.
If 22.4 liters of methane at STP react with 64.0 g of oxygen, 22.4 liters of carbon dioxide at STP can be produced.
The false statement is, "Every methane molecule that reacts produces two water molecules." Option a is correct choice.
The balanced equation for the combustion of methane is CH₄ + 2O₂ → CO₂ + 2H₂O. This means that for every molecule of methane that reacts, only two molecules of water are produced, not two molecules of water for every methane molecule. Therefore, the statement that "every methane molecule that reacts produces two water molecules" is false.
Not every methane molecule that reacts produces two water molecules. Rather, for every methane molecule that reacts, two water molecules are produced. So the correct statement would be: For every molecule of CH₄ that reacts, two molecules of H₂O are produced.
To know more about the methane, here
brainly.com/question/2127750
#SPJ4
--The complete question is, Which one of the following statements about the following reaction is false? CH₄ + 2O₂ → CO₂ + 2H₂O.
a. Every methane molecule that reacts produces two water molecules.
b. If 32.0 g of oxygen reacts with excess methane, the maximum amount of carbon dioxide produced will be 22.0 g.
c. If 11.2 liters of methane react with an excess of oxygen, the volume of carbon dioxide produced at STP is (44/16)(11.2) liters.
d. If 16.0 g of methane react with 64.0 g of oxygen, the combined masses of the products will be 80.0 g.
e. If 22.4 liters of methane at STP react with 64.0 g of oxygen, 22.4 liters of carbon dioxide at STP can be produced.--
Use the reaction below to calculate the number of grams of Al2O3 that could formed if 12.5 g O2 react completely with aluminum? (Answer: 26.6 g Al2O3)
4Al + 3O2 -> 2Al2O3
The number of grams of Al2O3 that can be formed if 12.5 g of O2 reacts completely with aluminum is 26.6 g.
The balanced chemical equation for the reaction is:
4Al + 3O2 -> 2Al2O3
From above,
We can conclude that,
4 moles of Al react with 3 moles of O2 to produce 2 moles of Al2O3.
Now using the above expression for calculating the number of moles of Al2O3 that can be produced from 12.5 g of O2.
For finding the number of moles, converting the mass of O2 to moles using its molar mass:
molar mass of O2 = 32.00 g/mol
moles of O2 = mass / molar mass = 12.5 g / 32.00 g/mol = 0.391 mol
Next, using the mole ratio from the balanced chemical equation to determine the number of moles of Al2O3 that can be produced:
moles of Al2O3 = (2/3) * moles of O2 = (2/3) * 0.391 mol = 0.261 mol
Now converting the number of moles of Al2O3 to grams using its molar mass:
molar mass of Al2O3 = 101.96 g/mol
So, the value of mass of Al2O3 will be
= moles of Al2O3 * molar mass = 0.261 mol * 101.96 g/mol = 26.6 g
For more questions on Balanced Chemical equation
https://brainly.com/question/26694427
#SPJ4
most of the starch is broken down into___which are then absorbed by the cells of___ and transported to the___by the veins.
Most of the starch is broken down into glucose molecules, which are then absorbed by the cells of the small intestine and transported to the liver by the portal vein. In the small intestine, starch is hydrolyzed by enzymes, such as amylase, into its constituent glucose molecules.
Glucose is then transported across the intestinal wall and into the bloodstream by specialized transport proteins. From there, glucose is carried to the liver through the portal vein, where it can be stored, metabolized, or released into the bloodstream as needed to fuel other tissues. The breakdown of starch and subsequent transport of glucose are essential processes for providing energy to the body's cells and maintaining normal physiological functions.
Find out more about glucose molecules.
brainly.com/question/29240192
#SPJ4
When 25.00 mL of an unknown weak base is titrated with 0.122 M HCI, it takes 32.42 mL to reach the equivalence point. Reference Material pH = -log[H") (H+) = 10 pk = -log K K = 10 X pOH = -log(OH) (OH) = 10-POH pk = -log K K = 10pk Molar Mass HCI 36.458 g/mol The ionic product of water = Kw = [H] x [OH-] = 1.0 x 10-14 at 298 K. The expression varies with temperature a) What is the concentration, in M, of the weak base? Enter a number only, no text. b) At half-equivalence point, the pH is 11.58. What would be the Kb of the weak base?
a) 0.158 M is the concentration of the weak base.
b) 5.01 x [tex]10^{-3}[/tex] is the Kb of the weak base.
a) To determine the concentration of the weak base, we can use the equation:
moles of HCl = moles of weak base
We can calculate the moles of HCl from the volume and concentration:
moles of HCl
= 0.122 M x 0.03242 L
= 0.00395 mol
At the equivalence point, the moles of HCl will be equal to the moles of the weak base. Therefore, we can use this information to find the moles of the weak base:
moles of weak base = 0.00395 mol
Now we can use the volume and moles of the weak base to calculate its concentration:
The concentration of weak base = moles of weak base/volume of the weak base
The concentration of weak base = 0.00395 mol / 0.02500 L
The concentration of weak base = 0.158 M
Therefore, the concentration of the weak base is 0.158 M.
b) We have added half the quantity of HCl required to achieve the equivalence point at the half-equivalence point. We may thus conclude that half of the weak base has been neutralized while the other half is still in its fundamental state. This indicates that the weak base and its conjugate acid are present in equal proportions.
[weak base] = [conjugate acid]
We can use the expression for the ionization constant (Kb) to relate the concentrations of the weak base and its conjugate acid:
Kb = [conjugate acid] x [OH-] / [weak base]
Since the solution is at half-equivalence, the concentration of the weak base and its conjugate acid are both equal to 0.079 M (half of the initial concentration of the weak base). We can use this information and the given pH to calculate the concentration of hydroxide ions ([OH-]):
pH = 11.58 = 14 - pOH
pOH = 2.42
[OH-] = [tex]10^{-pOH}[/tex]
[OH-] = 5.01 x [tex]10^{-3}[/tex] M
Now we can use the expression for Kb to calculate its value:
Kb = [conjugate acid] x [OH-] / [weak base]
Kb = (0.079 M) x (5.01 x 10^(-3) M) / (0.079 M)
Kb = 5.01 x 10^(-3)
Therefore, the Kb of the weak base is 5.01 x [tex]10^{-3}[/tex].
For similar question on moles of HCl,
https://brainly.com/question/28623917
#SPJ4
Determine the number of valence electrons for each of the atoms. Enter each answer as a numeral. For example, if an atom has two valence electrons, enter the number 2.B:P:O:Ne:
The number of the valence electrons for each of the atoms :
B = 3
P = 5
O = 6
Ne = 8
The Valence electrons are the electrons that is in the outermost shell, or energy level, of an atom. The valence electron is the electron in the outer shell that is associated with the atom, and that will participate in the formation of the bonds and the compounds.
The atomic number of the boron is 3. The valence electrons are 3 electrons in the outermost shell. The atomic number of the phosphorus is 5. The valence electrons are 5 electrons in the outermost shell. atomic number of the oxygen is 6. The valence electrons are 6 electrons in the outermost shell. The atomic number of the boron is 8. The valence electrons are 8 electrons in the outermost shell.
To learn more about valence electrons here
https://brainly.com/question/17426757
#SPJ4