Answer: 14a is 4 grams 14 b is 35 grams
Step-by-step explanation:
You are designing the shape of a new room in some building. You have been given n columns, each of the same unit thickness, but with different heights: A[1], A[2], ..., A[n]. You can permute the columns in a line to define the shape of the room. To make matters difficult,, you need to hang a large rectangular picture on the columns. If j consecutive columns in your order all have a height of at least k, then we can hang a rectangle of size j x k. The example in the picture contains 3 consecutive columns with heights of at least 4, so we can hang a rectangle of area 12 on the first three columns.
a) Give an efficient algorithm to find the largest area of a hangable rectangle for the initial order A[1], A[2], ..., A[n] of columns.
b) Devise an efficient algorithm to permute the columns into an order that maximizes the area of a hangable rectangle.
a) Use a stack to maintain increasing heights of columns. Pop from the stack and calculate the area each time a smaller column is encountered.
b) Sort the columns in descending order. Then, find the largest rectangle that can be hung on any consecutive sequence.
a) One approach to finding the largest area of a hangable rectangle for the initial order A[1], A[2], ..., A[n] of columns is to use a stack-based algorithm.
First, initialize an empty stack and set the maximum area to 0. Then, iterate through each column from left to right. For each column, if the stack is empty or the current column height is greater than or equal to the height of the top column on the stack, push the index of the column onto the stack.
Otherwise, while the stack is not empty and the current column height is less than the height of the top column on the stack, pop the top column index off the stack and calculate the area that can be hung on that column using the height of the popped column and the width of the current column (which is the difference between the current index and the index of the column at the top of the stack).
After iterating through all the columns, if there are any columns remaining on the stack, pop them off and calculate the area that can be hung on each column using the same method as before. Update the maximum area if any of these areas are greater than the current maximum.
Finally, return the maximum area.
b) To permute the columns into an order that maximizes the area of a hangable rectangle, one approach is to use a modified version of quicksort.
The pivot for the quicksort will be the column with the median height. First, find the median height of the columns, which can be done efficiently using the median-of-medians algorithm. Then, partition the columns into two groups: those with heights greater than or equal to the median and those with heights less than the median.
Next, recursively apply the quicksort algorithm to each of the two groups separately. The base case for the recursion is a group with only one column, which is already in the correct position.
Finally, concatenate the two sorted groups, with the group containing columns greater than or equal to the median on the left and the group containing columns less than the median on the right.
This algorithm will permute the columns into an order that maximizes the area of a hangable rectangle because it ensures that the tallest columns are positioned together, which maximizes the potential area of any hangable rectangle.
For similar question on Stack
https://brainly.com/question/29578993
#SPJ11
To solve this problem, we start by sorting the columns in decreasing order of height. Then, we iterate over the columns and try to form the largest rectangle possible with each consecutive set of columns that satisfy the height requirement.
We keep track of the maximum area found so far and return it at the end. This algorithm runs in O(n log n) time due to the initial sorting step. The intuition behind this algorithm is that we want to use the tallest columns first to maximize the possible height of the rectangles, which in turn increases the area. By starting with the tallest columns and checking for consecutive columns that satisfy the height requirement, we ensure that we are always maximizing the possible area for each rectangle.
When designing the room layout, to maximize the hangable rectangle area, follow these steps:
1. Sort the column heights in descending order: A_sorted = sort(A, reverse=True)
2. Initialize the maximum area: max_area = 0
3. Iterate through the sorted heights (i = 0 to n-1):
a) Calculate the consecutive rectangle area: area = A_sorted[i] * (i + 1)
b) Update the maximum area if needed: max_area = max(max_area, area)
4. Return max_area as the optimal hangable rectangle area.
This algorithm sorts the columns by height and checks each possible consecutive arrangement to find the one with the largest area. By sorting and iterating through the array, the algorithm ensures efficiency and maximizes the hangable rectangle area.
Learn more about algorithm here: brainly.com/question/31962429
#SPJ11
•Eight baskets have some apples in them, and the same number of apples are in each basket.
•Six apples are added to each basket to make a total of 144 apples.
Write an equation using x below.
The correct equation is,
⇒ 8(x + 6) = 144
Now, We can start building this equation by making everything equal to 144 since the problem is representing the total number of apples:
? = 144
Next, we don't know how many apples are in each basket, so we can represent it with a variable, x.
Since 6 apples are added to each basket we will simply add 6 to the "x" amount of apples in each basket:
x + 6 = 144
Lastly, according to the scenario, we have 8 baskets, each holding "x" amount of apples plus the extra 6 that was added, so it will be multiplied:
8(x + 6) = 144
Thus, The correct equation is,
8(x + 6) = 144
Learn more about the mathematical expression visit:
brainly.com/question/1859113
#SPJ1
Now, 6 669 x sin(x2) dx can be calculated using the substitution u = x and 22 du = 2x dx, which means that x dx = 1 2 1 du. Step 4 When x = 0, we have u = 0 0 and when x = 4, we have u = 16 161 Step 5 Therefore, 16 of xs x sin(x2) dx = 6.1 2 Jo 1,6 sin(u) du 116 3 [ 2x sin(u) x 19 0 6()
By substituting u = x² and using the appropriate differential, the integral can be transformed into 3∫(669 sin(u)) du, which can be further evaluated.
How can the integral 6∫(669x sin(x² )) dx be simplified using the substitution u = x² ?The given expression, 6∫(669x sin(x²)) dx, can be simplified using the substitution u = x² and 2x dx = du, which implies that x dx = (1/2) du. By substituting these values, the integral becomes 6∫(1/2)(669 sin(u)) du.
When x = 0, u = 0, and when x = 4, u = 16.
Thus, the integral can be rewritten as 6(1/2) ∫(669 sin(u)) du from 0 to 16.
Simplifying further, we get 3∫(669 sin(u)) du from 0 to 16, which evaluates to 3[-669 cos(u)] from 0 to 16, resulting in a final answer of -669[cos(16) - cos(0)].
Learn more about integral
brainly.com/question/31433890
#SPJ11
How many integers between 1 and 1000 meet the criteria below. Simplify your answer to an integer. • the digits are distinct the digits are odd • the digits are in ascending order
Answer:
Step-by-step explanation:
I am assuming that the number 1 is not included.
This is an arithmetic sequence of integers with first term 1 and last term 999.
Number required = (999-1) / 2
= 499.
There are 20 integers between 1 and 1000 that meet the given criteria.
To find this answer, we can start by noticing that there are only five odd digits: 1, 3, 5, 7, and 9. Therefore, any integer that meets the criteria must be made up of some combination of these digits.
Next, we can focus on the requirement that the digits be distinct. This means that we cannot repeat any of the odd digits within the same integer. We can use combinations to count the number of ways to choose three distinct odd digits from the set {1, 3, 5, 7, 9}:
5C3 = (5!)/(3!2!) = 10
Finally, we need to consider the requirement that the digits be in ascending order. Once we have chosen our three distinct odd digits, there is only one way to arrange them in ascending order. So each combination of three odd digits corresponds to exactly one integer that meets all the criteria.
To know more about integers visit:
https://brainly.com/question/15276410
#SPJ11
Suppose medical records indicate that the length of newborn babies (in inches) is normally distributed with a mean of 20 and a standard deviation of 2. 6 find the probability that a given infant is longer than 20 inches
With a mean of 20 inches and a standard deviation of 2.6 inches, the probability can be calculated as P(z > 0), which is approximately 0.5.
To find the probability that a given infant is longer than 20 inches, we need to use the normal distribution. The given information provides the mean (20 inches) and the standard deviation (2.6 inches) of the length of newborn babies.
In order to calculate the probability, we need to convert the value of 20 inches into a standardized z-score. The z-score formula is given by (x - μ) / σ, where x is the observed value, μ is the mean, and σ is the standard deviation.
Substituting the given values, we get (20 - 20) / 2.6 = 0.
Next, we find the area under the normal curve to the right of the z-score of 0. This represents the probability that a given infant is longer than 20 inches.
Using a standard normal distribution table or a calculator, we find that the area to the right of 0 is approximately 0.5.
Therefore, the probability that a given infant is longer than 20 inches is approximately 0.5, or 50%.
Learn more about probability here:
https://brainly.com/question/32117953
#SPJ11
The expression used to compute an interval estimate of may depend on any of the following factors except
a. the sample size
b. whether there is sampling error
c. whether the population standard deviation is known
d. whether the population has an approximately normal distribution
Is the answer b or d? please explain
Whether the population standard deviation is known or unknown affects the expression used for the interval estimate. Hence, option c. is the right response.
The expression used to compute an interval estimate of a population parameter (such as the mean) depends on the sample size, whether there is sampling error, and whether the population has an approximately normal distribution.
However, whether the population standard deviation is known or unknown also affects the expression used for the interval estimate.
If the population standard deviation is known, a z-score can be used in the calculation, whereas if it is unknown, a t-score is used and the sample standard deviation is used as an estimate for the population standard deviation. Therefore, c is the factor that does affect the expression used for the interval estimate.
Learn more about "standard deviation":
https://brainly.com/question/475676
#SPJ11
A recent article on NBC News stated that 60% of adults cannot change a flat tire. Suppose you randomly select 20 adults. Rather than ask them if they can change a flat tire, you show them a flat tire and ask them if they can change it for you. You offer $50 compensation for their service. Let =the number of adults that cannot change a flat tire .
Compute (>10) .
0.2447
0.8725
0.7553
0.1171
According to the information, the probability of more than 10 adults out of the 20 selected being unable to change a flat tire is approximately 0.1171.
How to calculate the probability that more than 10 adults can change a flat tire?To compute the probability of X, the number of adults who cannot change a flat tire, being greater than 10, we need to use the binomial distribution formula.
Given that the probability of an adult not being able to change a flat tire is 0.6, and assuming independence among the adults, we can calculate the probability as follows:
P(X > 10) = 1 - P(X ≤ 10)Using a binomial probability calculator or statistical software, we can find that P(X ≤ 10) is approximately 0.8829.
So, P(X > 10) = 1 - P(X ≤ 10) ≈ 1 - 0.8829 = 0.1171.
Thus, the probability of more than 10 adults out of the 20 selected being unable to change a flat tire is approximately 0.1171.
Learn more about probability in: https://brainly.com/question/31828911
#SPJ1
Let f(x;θ) = (1/θ)x(1-θ)/θ , 0< x < 1, 0 < θ < [infinity].
(a) Show that the maximum likelihood estimator of θ isθ =-(1/n)Σni=1 In Xi.
(b) Show that E( θ ) =θ and thus θ is an unbiasedestimator of θ.
Therefore, the MLE of θ is θ = -(1/n) ∑ln(x_i). Therefore, θ is an unbiased estimator of θ.
(a) To find the maximum likelihood estimator (MLE) of θ, we first write the likelihood function as follows:
L(θ|x_1, x_2, ..., x_n) = ∏(i=1 to n) f(x_i; θ)
= ∏(i=1 to n) [(1/θ)x_i(1-θ)/θ]
= (1/θ^n) ∏(i=1 to n) x_i(1-θ)
Taking the natural logarithm of L(θ|x_1, x_2, ..., x_n), we have:
ln(L(θ|x_1, x_2, ..., x_n)) = -n ln(θ) + (1-θ) ∑ln(x_i)
To find the MLE of θ, we differentiate ln(L(θ|x_1, x_2, ..., x_n)) with respect to θ and set the derivative to zero:
d/dθ ln(L(θ|x_1, x_2, ..., x_n)) = -n/θ + ∑ln(x_i) = 0
Solving for θ, we get:
θ = -(1/n) ∑ln(x_i)
(b) To show that θ is an unbiased estimator of θ, we need to find its expected value:
E(θ) = E[-(1/n) ∑ln(x_i)]
= -(1/n) ∑E[ln(x_i)]
= -(1/n) ∑[∫0^1 ln(x_i) (1/θ)x_i(1-θ)/θ dx_i]
= -(1/n) ∑[∫0^1 (1/θ)ln(x_i)x_i(1-θ) d(x_i)]
= -(1/n) ∑[θ(-1/(θ^2))(1/2)ln(x_i)^2|0^1 + (1/θ)(1/2)x_i^2(1-θ)|0^1]
= -(1/n) ∑[(1/2θ)ln(x_i)^2 - (1/2θ)x_i^2(θ-1)]
= -(1/n) [(1/2θ)∑ln(x_i)^2 - (1/2θ)(θ-1)∑x_i^2]
Note that ∑ln(x_i)^2 and ∑x_i^2 are constants with respect to θ. Therefore, we have:
E(θ) = -(1/n) [(1/2θ)∑ln(x_i)^2 - (1/2θ)(θ-1)∑x_i^2]
= (1/2) - (1/2nθ)
Since E(θ) = θ, we have:
θ = (1/2) - (1/2nθ)
Solving for θ, we get:
θ = 1/(n+2)
To know more about unbiased estimator,
https://brainly.com/question/30982574
#SPJ11
Use the method of iteration to find a formula expressing sn as a function of n for the given recurrence relation and initial conditions.
S(n) = 5 - 3S(n-1), S(0) = 2
The formula expressing S(n) is
{ [tex]2 + 6 * (2^{(n/2)} - 1)[/tex], if n is even,
[tex]-1 - 6 * (2^{((n-1)/2)} - 1)[/tex], if n is odd. }
How can we determine a formula for S(n) based on the given recurrence relation and initial condition?To find a formula expressing S(n) as a function of n for the given recurrence relation S(n) = 5 - 3S(n-1) with initial condition S(0) = 2, we can use the method of iteration.
Let's iterate the recurrence relation to find a pattern:
For n = 0: S(0) = 2
For n = 1: S(1) = 5 - 3S(0) = 5 - 3(2) = -1
For n = 2: S(2) = 5 - 3S(1) = 5 - 3(-1) = 8
For n = 3: S(3) = 5 - 3S(2) = 5 - 3(8) = -19
For n = 4: S(4) = 5 - 3S(3) = 5 - 3(-19) = 62
We can observe that the signs of the terms alternate between positive and negative. Let's analyze this pattern further.
For n = 0, 2, 4, 6, ..., the terms are positive: 2, 8, 62, ...
For n = 1, 3, 5, 7, ..., the terms are negative: -1, -19, -157, ...
From the pattern, we can deduce that for even values of n, S(n) is given by a formula:
[tex]S(n) = 2 + 6 * (2^{(n/2)} - 1)[/tex]
And for odd values of n:
[tex]S(n) = -1 - 6 * (2^{((n-1)/2)} - 1)[/tex]
Therefore, the formula expressing S(n) as a function of n for the given recurrence relation and initial conditions is:
S(n) ={ [tex]2 + 6 * (2^{(n/2)} - 1)[/tex], if n is even,
[tex]-1 - 6 * (2^{((n-1)/2)} - 1)[/tex], if n is odd. }
Learn more about method of iteration
brainly.com/question/32199428
#SPJ11
Which of the following is not one of the things the relative frequency (Rf) of z-scores allows us to calculate for corresponding raw scores? Remember, what is true for the z-score is also true for its corresponding individual raw or sample to mean score.a) Factors related to cause and effectb) Probabilityc) Comparison against other variables (e.g. IQ vs. SAT scores)d) Relative frequency
Factors related to cause and effect is not one of the things the relative frequency (Rf) of z-scores allows us to calculate for corresponding raw scores. The correct answer is a) Factors related to cause and effect.
The relative frequency (Rf) of z-scores is a statistical tool that calculates the probability of obtaining a certain raw score or a score more extreme than that. It allows for inferences to be made about the population from which the sample was drawn and for comparisons to be made between variables. However, Rf does not provide information on factors related to cause and effect, as it cannot establish cause-and-effect relationships between variables. It is useful in analyzing data in the context of a normal distribution and calculating the frequency of occurrence of certain scores in a given population. Therefore the correct answer is a) Factors related to cause and effect.
Learn more about relative frequency (Rf) :
https://brainly.com/question/29267583
#SPJ11
Drag the tiles to the correct boxes. Not all tiles will be used.
Determine which steps are used to find the product shown. Put the steps in the order in which they would be performed.
x
2
+
7
x
+
10
x
2
+
4
x
+
4
⋅
x
2
+
3
x
+
2
x
2
+
6
x
+
5
x
+
2
1
(
x
+
5
)
(
x
+
2
)
(
x
+
2
)
(
x
+
5
)
(
x
+
5
)
(
x
+
2
)
(
x
+
5
)
(
x
+
7
)
(
x
+
1
)
(
x
+
4
)
(
x
+
1
)
⋅
(
x
+
3
)
(
x
+
1
)
(
x
+
3
)
(
x
+
2
)
(
x
+
5
)
(
x
+
2
)
⋅
(
x
+
2
)
(
x
+
5
)
(
x
+
2
)
(
x
+
5
)
(
x
+
2
)
(
x
+
2
)
⋅
(
x
+
1
)
(
x
+
2
)
(
x
+
5
)
(
x
+
1
)
(
x
+
7
)
(
x
+
1
)
(
x
+
4
)
(
x
+
2
)
↓
↓
↓
The steps are explained below.
Factorization of the given polynomial to find the product is as follows;
(x² + 3x + 2)/(x² + 6x + 5) = (x + 1)(x + 2)/(x + 1)(x + 5)
(x² + 7x + 10)/(x² + 4x + 4) = (x + 2)(x + 5)/(x + 2)(x + 2)
Expressing the product in terms of the factors
(x² + 3x + 2)/(x ^ 2 + 6x + 5) × (x² + 7x + 10)/(x² + 4x + 4) = (x + 2)(x + 5)/(x + 2)(x + 2) × (x + 1)(x + 2)/(x + 1)(x + 5)
The steps arranged in the order in which they would be performed are;
First step;
(x² + 3x + 2)/(x² + 6x + 5) × (x² + 7x + 10)/(x² + 4x + 4)
Second step (factorizing) =
(x + 1)(x + 2)/(x + 1)(x + 5) × (x + 2)(x + 5)/(x + 2)(x + 2)
Third step (dividing out common terms) =
(x+5)/(x+2) × (x+2)/(x+5)
Fourth step (rearranging and removing terms that cancel each other)
= 1
Learn more here about factorization:
brainly.com/question/12723898
#SPJ1
now, g(x) = x 7 , g'(x) = 1 7 . define f(g(x)) = csc2 x 7 , such that f(x) = csc2. Rewrite the given integral in terms of g(x), where F(g(x)) is the antiderivative of f(g(x)).
The integral ∫csc^2(x) dx can be rewritten in terms of g(x) as F(g(x)) - 2/7 ∫csc(g(x)/7) cot(g(x)/7) dx, where F(g(x)) is the antiderivative of csc^2(g(x)/7).
Let's start by substituting g(x) into the function f(x):
f(g(x)) = csc^2(g(x)/7)
Next, we can use the chain rule to find the derivative of f(g(x)):
f'(g(x)) = -2csc(g(x)/7) cot(g(x)/7) / 7
Using the substitution u = g(x), we can rewrite the integral in terms of g(x) as follows:
∫csc^2(x) dx = ∫f(g(x)) dx = ∫f(u) du = F(u) + C
Substituting back in for u, we get:
∫csc^2(x) dx = F(g(x)) + C
Using the derivative of f(g(x)) that we found earlier, we can substitute it into the integral:
∫csc^2(x) dx = -2/7 ∫csc(g(x)/7) cot(g(x)/7) dx
Therefore, the integral in terms of g(x) and the antiderivative F(g(x)) is:
∫csc^2(x) dx = F(g(x)) - 2/7 ∫csc(g(x)/7) cot(g(x)/7) dx
To know more about integral,
https://brainly.com/question/1383192
#SPJ11
how that any permutation is a product of transpositions, that is, any arrangement of n things may be achieved by repeated swaps.
Any permutation can be achieved by performing a series of transpositions, where you repeatedly swap elements until all objects are in their correct positions.
A permutation is an arrangement of n objects in a specific order, while a transposition is a simple swap of two elements in a permutation.
To show that any permutation can be achieved by a product of transpositions, let's follow these steps:
Step 1: Consider a permutation of n objects, where at least one element is not in its desired position.
Step 2: Identify the first element that is not in its correct position. This element should be at position i but should be in position j.
Step 3: Perform a transposition by swapping the element in position i with the element in position j. Now, the element that was originally in position i is in its correct position.
Step 4: Repeat steps 2 and 3 for the remaining n-1 objects, excluding the element that has been placed in its correct position.
Step 5: Continue this process until all elements are in their correct positions. At this point, you have achieved the desired permutation by performing a series of transpositions (swaps).
In summary, any permutation can be achieved by performing a series of transpositions, where you repeatedly swap elements until all objects are in their correct positions.
Learn more about permutation here:
https://brainly.com/question/31369352
#SPJ11
In ΔGHI, the measure of ∠I=90°, the measure of ∠G=82°, and GH = 3. 4 feet. Find the length of HI to the nearest tenth of a foot
In triangle ΔGHI, with ∠I measuring 90° and ∠G measuring 82°, and GH measuring 3.4 feet, the length of HI is 24.2 feet.
To find the length of HI, we can use the trigonometric function tangent (tan). In a right triangle, the tangent of an angle is equal to the ratio of the length of the side opposite the angle to the length of the side adjacent to it. In this case, the side opposite ∠G is HI, and the side adjacent to ∠G is GH. Therefore, we can set up the equation: tan(82°) = HI / GH.
Rearranging the equation to solve for HI, we have: HI = GH * tan(82°). Plugging in the given values, we get: HI = 3.4 * tan(82°). Using a calculator, we find that tan(82°) is approximately 7.115. Multiplying 3.4 by 7.115, we find that HI is approximately 24.161 feet. Rounded to the nearest tenth of a foot, the length of HI is 24.2 feet.
Learn more about tangent here:
https://brainly.com/question/10053881
#SPJ11
(1 point) for the functions f(t)=h(t) and g(t)=h(t), defined on 0≤t<[infinity], compute f∗g in two different ways:
We get two different answers for fg depending on the method used to compute the convolution. Using a change of variables, we get fg = 1/√(2π), while using integration by parts, we get f°g = ∞.
Since both functions f!(t) and g(t) are equal to h(t), their convolution f°g can be computed as follows:
f°g = ∫[0,∞] f(τ)g(t-τ) dτ
= ∫[0,∞] h(τ)h(t-τ) dτ
Method 1: Change of Variables
To compute the convolution using a change of variables, let u = t' and v = t - t'. Then, τ = u and t = u + v, and we have:
f°g = ∫∫[D] h(u)h(u+v) dudv
where D is the region of integration corresponding to the domain of u and v. Since the limits of integration are 0 to ∞ for both u and v, we can write:
f°g = ∫[0,∞] ∫[0,∞] h(u)h(u+v) dudv
Using the convolution theorem, we know that f°g is equal to the Fourier transform of H(f), where H(f) is the Fourier transform of h(t). Since h(t) is a constant function, H(f) is a Dirac delta function, given by:
H(f) = 1/√(2π) δ(f)
where δ(f) is the Dirac delta function. Therefore, we have:
f°g = Fourier^-1{H(f)} = Fourier^-1{1/√(2π) δ(f)} = 1/√(2π)
Method 2: Integration by Parts
To compute the convolution using integration by parts, we have:
f°g = ∫[0,∞] h(τ)h(t-τ) dτ
= h(t) ∫[0,∞] h(τ-t) dτ (using a change of variables)
= h(t) ∫[0,∞] h(u) du (since h is a constant function)
= h(t) [u]0^∞
= h(t) [∞ - 0]
= ∞
Learn more about integral function at https://brainly.com/question/29738170
#SPJ11
7.5-7 given x = cos and y = sin , where is an rv uniformly distributed in the range (0, 2π ), show that x and y are uncorrelated but are not independent.
Therefore, x and y for the indefinite integral are not independent, even though they are uncorrelated.
To show that x and y are uncorrelated, we need to compute their indefinite integraland show that it is zero:
Cov(x, y) = E(xy) - E(x)E(y)
We can compute E(x) and E(y) as follows:
E(x) = E(cos) = ∫(cos*f( )d ) = ∫(cos(1/2π)*d ) = 0
E(y) = E(sin) = ∫(sin*f( )d ) = ∫(sin(1/2π)*d ) = 0
where f( ) is the probability density function of , which is a uniform distribution over the range (0, 2π).
Next, we compute E(xy):
E(xy) = E(cossin) = ∫(cossinf( )d ) = ∫(cossin(1/2π)*d )
Since cos*sin is an odd function, we have:
∫(cossin(1/2π)*d ) = 0
Therefore, Cov(x, y) = E(xy) - E(x)E(y) = 0 - 0*0 = 0.
Hence, x and y are uncorrelated.
To show that x and y are not independent, we need to find P(x, y) and show that it does not factorize into P(x)P(y):
P(x, y) = P(cos, sin) = P( ) = (1/2π)
Since P(x, y) is constant over the entire range of (cos, sin), we can see that P(x, y) does not depend on either x or y, i.e., it does not factorize into P(x)P(y).
To know more about indefinite integral,
https://brainly.com/question/29133144
#SPJ11
Solve the following linear program: Identify the optimal solution.
Minimize C = 3x + 4y
Subject to:
3x - 4y<= 12 A
x + 2y>= 4 B
x>= 1 C
x, y >= 0
The optimal solution of the given linear program is (x, y) = (2, 1).
How to solve linear programming problems?
To solve the linear program, we first plot the feasible region determined by the constraints:
3x - 4y <= 12Ax + 2y >= 4x >= 1x, y >= 0We can rewrite the second constraint as y >= (4 - Ax)/2.
Next, we plot the lines 3x - 4y = 12 and Ax + 2y = 4 - 2x and shade the appropriate regions:
3x - 4y = 12 => y <= (3/4)x - 3Ax + 2y = 4 - 2x => y >= (4 - Ax)/2We can see that the feasible region is bounded, so we can find the optimal solution by evaluating the objective function C at each of the corner points of the feasible region.
The corner points are:
(1, 0)(2, 0)(8/3, -3/4)(4, 0)(3, 1/2)(2, 1)Evaluating C at each corner point, we get:
(1, 0) => C = 3(1) + 4(0) = 3(2, 0) => C = 3(2) + 4(0) = 6(8/3, -3/4) => C = 3(8/3) + 4(-3/4) = 4(4, 0) => C = 3(4) + 4(0) = 12(3, 1/2) => C = 3(3) + 4(1/2) = 10.5(2, 1) => C = 3(2) + 4(1) = 11Thus, the optimal solution is at (2, 1) with a minimum value of C = 11.
Learn more about Linear program
brainly.com/question/30763902
#SPJ11
What is the result when the number 32 is increased by 25%?
Answer:
Step-by-step explanation:
32.00 increased by 25% is 40.00
The increase is 8.00
The volume of this triangular prism is 140 cubic meters. What is the value of g?
The value of g of the given triangular prism is: 3.5 meters
What is the volume of the triangular prism?The formula for calculating the Volume of a triangular prism is expressed as the area of the base times it's height. Thus:
Volume = Base area * height
We are given that the volume is 140 cubic meters.
Thus,
140 = (10 * g) * 4
because we are given one of the base length as 10 and the height as 4 m. Thus:
40g = 140
g = 140/40
g = 3.5 meters
Read more about Volume of Triangular Prism at: https://brainly.com/question/12591701
#SPJ4
derive the trigonoemtric foruties series from the complex exponential series
To derive the trigonometric Fourier series from the complex exponential series, we can start with the complex exponential Fourier series: The trigonometric Fourier series is f(x) = a0/2 + Σ[cn e^(inx)]
where cn = (an - ibn)/2.
f(x) = a0/2 + Σ(an cos(nx) + bn sin(nx))
where a0/2 is the average value of f(x), and an and bn are the Fourier coefficients given by:
an = (1/π) ∫f(x)cos(nx)dx
bn = (1/π) ∫f(x)sin(nx)dx
We can rewrite the trigonometric terms in terms of complex exponentials as follows:
cos(nx) = (e^(inx) + e^(-inx))/2
sin(nx) = (e^(inx) - e^(-inx))/(2i)
Substituting these expressions into the complex exponential Fourier series, we get:
f(x) = a0/2 + Σ[(an + ibn)(e^(inx) + e^(-inx))/2]
where ibn = bn/i.
We can simplify this expression as follows:
f(x) = a0/2 + Σ[cn e^(inx)]
where cn = (an - ibn)/2.
This is the trigonometric Fourier series, which expresses the function f(x) as a sum of complex exponential terms with real coefficients. We can write this more explicitly as:
f(x) = a0/2 + Σ[cn (cos(nx) + i sin(nx))]
which is the same as:
f(x) = a0/2 + Σ[cn cos(nx)] + i Σ[cn sin(nx)]
So, to derive the trigonometric Fourier series from the complex exponential series, we simply substitute the complex exponential expressions for cos(nx) and sin(nx), and simplify the resulting expression to obtain the coefficients cn.
https://brainly.com/question/31959354
#SPJ11
Use Exercise 29 to show that among any group of 20 people (where any two people are either friends or enemies), there are either four mutual friends or four mutual enemies.
Among any group of 20 people (where any two people are either friends or enemies), there are either four mutual friends or four mutual enemies.
Let's assume there is a group of 20 people. Choose a person, say person A. There are two Probablities: A has at least 10 friends, or A has at least 10 enemies. Without loss of generality, let's assume A has at least 10 friends.
Now consider the 10 friends of A. Either they are all friends with each other, or there are two among them who are enemies. In the first case, we have found a group of four mutual friends (A and the other three). In the second case, let's say B and C are enemies.
If B and C are both friends with A, then we have found a group of four mutual enemies (B, C, and the two friends of A who are enemies with each other).
If either B or C is not friends with A, then we have found a group of four people (A, B, C, and one of A's friends who is an enemy of B or C) who are either four mutual friends or four mutual enemies.
Hence, among any group of 20 people, there are either four mutual friends or four mutual enemies.
For more questions like Probability click the link below:
https://brainly.com/question/30034780
#SPJ11
You roll a 6-sided die.What is P(divisor of 70)?
Answer:
P(divisor of 70) = 1/2
Step-by-step explanation:
P(divisor of 70) means what is the probability that the role results in a divisor of 70.
The divisors of 70 are: 1, 2, 5, 7, 10, 14, 35, 70
Since 1,2, and 5 are the only ones that can actually be rolled on a 6-sided die, there is a [tex]\frac{3}{6}[/tex] or [tex]\frac{1}{2}[/tex] chance to roll a divisor of 70.
Answer: 5%
Step-by-step explanation:
(1), (2), 3, 4, (5), 6,
70/1 = 70. ( these are integers)
70/2 = 35
70/5 = 14
3 over 6 = 1 over 2 = 50%
hope this helps!!
A boy wants to purchase 8,430 green marbles. If there are 15 green marbles in each bag, how many bags of marbles should the boy buy?
Answer:
562 bags.
Step-by-step explanation:
8,430 divided by 15 is 562.
state which of the following matrices are equal
there is no equations
Hey There!
Step-by-step explanation:
Which of the matrices are equal?
Two matrices are said to be equal if: Both the matrices are of the same order i.e., they have the same number of rows and columns A m × n = B m × n .
set up a triple integral for the volume of the solid. do not evaluate the integral. the solid in the first octant bounded by the coordinate planes and the plane z = 8 − x − y
To set up a triple integral for the volume of the solid in the first octant bounded by the coordinate planes and the plane z = 8 − x − y, we need to break down the solid into its boundaries and express them in terms of the limits of integration for the triple integral.
Since the solid is in the first octant, all three coordinates (x, y, z) are positive. Therefore, the boundaries for the solid are: 0 ≤ x ≤ ∞ (bounded by the x-axis and the plane x = ∞)
0 ≤ y ≤ ∞ (bounded by the y-axis and the plane y = ∞)
0 ≤ z ≤ 8 − x − y (bounded by the plane z = 8 − x − y)
Thus, the triple integral for the volume of the solid can be expressed as:
∫∫∫ E dz dy dx
where E is the region in xyz-space defined by the boundaries above.
Therefore, ∫∫∫ E dz dy dx = ∫0^∞ ∫0^(∞-x) ∫0^(8-x-y) dz dy dx
This triple integral represents the volume of the solid in the first octant bounded by the coordinate planes and the plane z = 8 − x − y. However, we have not evaluated the integral yet, so we cannot find the actual value of the volume.
Learn more about boundaries here
https://brainly.com/question/22005072
#SPJ11
NEED HELP ASAP PLEASE!
Using the formula of conditional probability, the probability that a student buys lunch given that they ride the bus is approximately 81.25%. So, 81.25% is the right answer.
To find the probability that a student buys lunch given that they ride the bus, we can use conditional probability.
Let's denote the following events:
A: Student buys lunch
B: Student rides the bus
We are given:
P(B) = 80% = 0.80 (probability that a student rides the bus)
P(A) = 75% = 0.75 (probability that a student buys lunch)
P(A|B) = 65% = 0.65 (probability that a student buys lunch given that they ride the bus)
Using the concept of conditional probability
Probability of a student buying lunch and riding the bus = 65%
Probability of a student riding the bus = 80%
Probability of a student buying lunch given that they ride the bus = (Probability of a student buying lunch and riding the bus) / (Probability of a student riding the bus) = 65% / 80% = 0.8125 = 81.25%
For more such question on conditional probability
https://brainly.com/question/10739997
#SPJ11
Imani increased her 401k contributions, which decreased her net pay from $637. 00 to $588. 0.
Determine the percent that Imani's net pay was decreased.
Round your answer to the nearest tenth of a percent
Imani's net pay decreased by approximately 7.7% when she increased her 401k contributions, resulting in a decrease of $49.00 from her initial net pay of $637.00.
To determine the percent that Imani's net pay was decreased, we need to find the difference between her initial net pay and her net pay after increasing her 401k contributions, and then calculate that difference as a percentage of her initial net pay.
Let's denote the initial net pay as A and the net pay after increasing the 401k contributions as B.
A = $637.00 (initial net pay)
B = $588.00 (net pay after increasing 401k contributions)
The decrease in net pay can be calculated by subtracting B from A:
Decrease = A - B = $637.00 - $588.00 = $49.00
Now, to find the percentage decrease, we divide the decrease by the initial net pay (A) and multiply by 100:
Percentage Decrease = (Decrease / A) * 100 = ($49.00 / $637.00) * 100 ≈ 7.68%
Therefore, the percent that Imani's net pay was decreased, rounded to the nearest tenth of a percent, is approximately 7.7%.
For more such questions on net pay
https://brainly.com/question/4356180
#SPJ8
compute the approximate elasticity of demand from the following data: price quantity initial situation $23 11.5 new situation 20 13.5 .87 1.15 5.0 1.5
To compute the approximate elasticity of demand, we can use the formula:
Elasticity of Demand = [(Q2 - Q1) / ((Q2 + Q1) / 2)] / [(P2 - P1) / ((P2 + P1) / 2)]
Given the following data:
Initial situation:
Price (P1) = $23
Quantity (Q1) = 11.5
New situation:
Price (P2) = $20
Quantity (Q2) = 13.5
Using the formula, we can calculate the approximate elasticity of demand:
Elasticity of Demand = [(13.5 - 11.5) / ((13.5 + 11.5) / 2)] / [(20 - 23) / ((20 + 23) / 2)]
Elasticity of Demand = [(2) / (12.5)] / [(-3) / (21.5)]
Elasticity of Demand = (2/12.5) * (-21.5/3)
Elasticity of Demand = -0.34
Therefore, the approximate elasticity of demand is approximately -0.34.
Learn more about elasticity here: brainly.com/question/32386522
#SPJ11
A player chooses one card from deck a and one card from deck b. what is the probability that the player will choose a c2 card from the first deck or a c6 card from the second deck?
the probability of choosing a c3 card from deck a or choosing a c5 card from deck b is?
To calculate the probability of choosing a c2 card from the first deck (Deck A) or a c6 card from the second deck (Deck B):
First, calculate the probability of choosing a c2 card from Deck A:
P(c2) = Number of c2 cards in Deck A / Total number of cards in Deck A
= 4/20
= 1/5
Next, calculate the probability of choosing a c6 card from Deck B:
P(c6) = Number of c6 cards in Deck B / Total number of cards in Deck B
= 2/10
= 1/5
Since the events of choosing a c2 card and a c6 card are mutually exclusive, the probability of both events occurring together (P(c2 and c6)) is zero.
Therefore, the probability of choosing a c2 card from Deck A or a c6 card from Deck B can be found by adding these probabilities:
P(c2 or c6) = P(c2) + P(c6) - P(c2 and c6)
= 1/5 + 1/5 - 0
= 2/5
So, the probability of choosing a c2 card from Deck A or a c6 card from Deck B is 2/5.
Now, let's calculate the probability of choosing a c3 card from Deck A or a c5 card from Deck B:
P(c3) = Number of c3 cards in Deck A / Total number of cards in Deck A
= 5/20
= 1/4
P(c5) = Number of c5 cards in Deck B / Total number of cards in Deck B
= 1/10
Therefore, the probability of choosing a c3 card from Deck A or a c5 card from Deck B is:
P(c3 or c5) = P(c3) + P(c5)
= 1/4 + 1/10
= 3/10
So, the probability of choosing a c3 card from Deck A or a c5 card from Deck B is 3/10.
To know more about mutually exclusive,visit:
https://brainly.com/question/30512497
#SPJ11
A news organization surveyed 75 adults. Each said he or she gets news from only one source. Here is a summary of their sources of news. Source of news Number of adults Newspaper 14 Internet 38 Radio 10 Television 13 Three of the adults from the survey are selected at random, one at a time without replacement. What is the probability that the first two adults get news from television and the third gets news from the newspaper? Do not round your intermediate computations. Round your final answer to three decimal places.
Rounding to three decimal places, the probability is approximately 0.007.
To find the probability that the first two adults get news from television and the third gets news from the newspaper, we need to use the multiplication rule for independent events.
The probability of selecting an adult who gets news from television on the first draw is 13/75, since there are 13 adults who get news from television out of a total of 75 adults.
Assuming the first draw is an adult who gets news from television, there are now 12 adults who get news from television out of a total of 74 adults.
So the probability of selecting another adult who gets news from television on the second draw, given that the first draw was an adult who gets news from television, is 12/74.
Assuming the first two draws are adults who get news from television, there are now 14 adults who get news from a newspaper out of a total of 73 adults.
So the probability of selecting an adult who gets news from a newspaper on the third draw, given that the first two draws were adults who get news from television, is 14/73.
Therefore, the probability that the first two adults get news from television and the third gets news from the newspaper is:
(13/75) * (12/74) * (14/73) = 0.0067
For similar question on probability:
https://brainly.com/question/14210034
#SPJ11