Air has a mass of 1.2g and a volume of 4,555ml. What is the density

. The atom has 2 more electrons than protons giving it a negative charge (2-)

Answer:

[tex]\Large \boxed{\mathrm{1 \ valence \ electron}}[/tex]

Explanation:

Molybdenum is an element with an atomic number of 42.

An atom of Molybdenum has 42 electrons.

The electronic configuration of Molybdenum is 2, 8, 18, 13, 1.

The valence electrons are the number of electrons in the last shell.

Molybdenum has 1 valence electron.

Your question has been heard loud and clear.

Well , as the helium flows from tank to balloons , the helium inside the tank decreases , so air fills the remaining space inside the tank. Also , helium is stored under high pressure in the tank because , helium is lighter than air , so its molecules have high energy and this energy causes pressure which increases the temperature. Once the helium is let out , the tank cools down.

Thank you

Answer:

If each element can be identified by its spectrum then the composition of an unknown star can be determined

Explanation:

The chemical nature of the elements is that they absorb specific wavelength of light depending on their atom. By spectral analysis of the spectrum of emitted light by a body, the body's composition can therefore be determined. As such in order to determine the composition of distant bodies such as planets, stars and other celestial bodies scientists usually make use of spectroscopy.

Answer:

If each element can be identified by its spectrum then the composition of an unknown star can be determined

Explanation:

Answer:

The density of helgas sample is 17.8 g/cm³.

Explanation:

Given that,

Mass of sample of Rowena = 5 gram

Density = 8.9 g/cm³

Mass of sample of helga = 10 gram

We need to calculate the volume of sample

Using formula of volume

[tex]V=\dfrac{m}{\rho}[/tex]

Where, m = mass

[tex]\rho[/tex] = density

Put the value into the formula

[tex]V=\dfrac{5}{8.9}[/tex]

[tex]V=0.56\ cm^3[/tex]

We need to calculate the density of helgas sample

Using formula of density

[tex]\rho=\dfrac{m}{V}[/tex]

Where, m = mass

V = volume

Put the value into the formula

[tex]\rho=\dfrac{10}{0.56}[/tex]

[tex]\rho=17.8\ g/cm^3[/tex]

Hence, The density of helgas sample is 17.8 g/cm³.

Answer:

THE NUMBER OF ATOMS OF CHLORINE IN THE SAMPLE IS 25.95 * 10^45 ATOMS.

Explanation:

Number of molecules = 4.31 * 10^22 molecules of SCl2

From Avogadro's rule which states that equal volume of gases at the same temperature and pressure have the same number of molecules.

1 mole = 6.022 * 10 ^ 23 particles or atoms

So therefore, we equate the given value of SCl2 molecules and solve for the number of atoms of chlorine in the molecule

1 mole = 6.022 * 10^23 atoms

From the break down of SCl2

SCl2 -------> S+ + 2Cl -

So therefore, 2 moles of chlorine is present

2 moles = 2 * 6.022 *10^23

4.31 * 10^22 moles = x atoms

= 4.31 * 10 ^22 * 2 * 6.022 * 10^23 / 2

= 25.95482 * 10^45 atoms

In conclusion, the number of atoms of chlorine present in the sample is 25.95 * 10^45 atoms.

Answer:

science is valued by the society because the application of scientific knowledge helps to satisfy many basic human needs and improve living standards

Explanation:

Finding a cure for cancer and a clean form of energy are just two typical examples

Answer:

Science is about a whole lot more than that and to sum it up we believe that science is a way of helping the brain grow in finding new knowledge and helps us defeat our curiosity of how the world develops and works today. Science is important because it has helped form the world that we live in today.

Explanation:

In other words, science is one of the most important channels of knowledge. It has a specific role, as well as a variety of functions for the benefit of our society: creating new knowledge, improving education, and increasing the quality of our lives. Science must respond to societal needs and global challenges.

w h y d I d t h I s t a k e m e s o l o n g

Answer: Both A and R are false.

Answer:

Hey there!

The volume of the box would be 45(7)(15), or 4725 cm^3.

The density of any object is the mass divided by volume. Thus, the density of the water would be 14/2, or 7 g/cm^3.

Let me know if this helps :)

Answer:

You may be saving someone from a rock slide, where the rocks will fall at any time, before they fall they have potential energy.

The one way that potential energy might be involved in rescue team missions to save someone to fall is potential energy is used to hold one.

Gravity is the interaction that is because of the force of energy between the surface of the earth to the mass or any energy present on the earth's surface and the force becomes double with the weight.

The potential energy is a form of energy that is used against gravity to do the work which required energy and in rescue, the energy is needed in every coss to save one.

Therefore, one way that potential energy might be involved in rescue team missions to save someone to fall is because gravitational potential energy is used to hold one.

Learn more about  gravity, here:

https://brainly.com/question/13810323

#SPJ2

Answer:

Facts

Explanation:

You can literally read the lesson it tells you science is

all about facts

Answer:

2.040 cm

Explanation:

If we study the options closely, we will discover that the chosen option is exactly the same as the actual value of the length of the test tube.

Hence it follows that the option chosen in the answer represents the actual measurement of the length of the test tube as stated above

Answer:

1. True.

2. False.

3. True.

Explanation:

1. Mass is simply defined as the quantity of matter present in a body. This means that mass gives us an idea of the amount of matter present in any object or body.

Therefore, the answer to the question is True.

2. Weight of an object is simply defined as the gravitational pull of the earth on an object. This implies that location of the object will greatly influence it's weight as the gravitational pull will varies from place to place. Hence, the weight of the object will differ as the location of the object changes.

Therefore, the answer to the question is False.

3. As defined above mass is the amount of matter present in an object.

The mass of an abject is constant irrespective of the location of the object.

Therefore, the answer to the question is True.

Answer:

32.25

Explanation:

8NH3 + 3Cl2 → 6NH4Cl + N2

NH3 = 17 g/mol

number of moles = 1

NH4Cl= 43 g/mol

number of moles = 3/4

mass= 43 × ¾ ≈ 32.25 g

Answer:

40.1

Explanation:

its correct your welcome

Answer:

9872.3 cm

Explanation:

Answer:

B). The height of the water in the jar.

Explanation:

A dependent variable is characterized as the variable that observes the change or effect caused by experimental manipulation in the independent variable. It is the variable that is being tested in the experiment. In the given experiment of the burning candle, 'the height of water in the jar' will rise or drop with manipulation in the independent variable i.e. 'the number of candles.' Since it is affected by the alteration in other variables, it is the dependent variable. Thus, option B is the correct answer.

Answer: The study of elements and their compounds and reactions with one another.

Explanation: ACTUAL DEFINITION (Chemistry is the scientific discipline involved with elements and compounds composed of atoms, molecules and ions: their composition, structure, properties, behavior and the changes they undergo during a reaction with other substances.)

Organic Chemistry: the chemistry of carbon compounds

Inorganic Chemistry: deals with chemicals

The branch of science deals with the identification of the substances of which matter is composed; the investigation of their properties and the ways in which they change, interact, combine, and the use of these processes to form new substances.

To know more about:-

brainly.com/question/9457867

Explanation:

In general, to balance an equation, here are the things we need to do:

Count the atoms of each element in the reactants and the products.

Use coefficients; place them in front of the compounds as needed.

it is CO2

Explanation:

Answer:

4.167 hours

Explanation:

The drop factor is the amount of fluid falling for one millimeter of fluid in gttt/ml.

The flow rate is the volume administered for a specific period of time in ml/hr = volume / time

The unit of drip rate is gtt/min

The formula that shows the relationship is:

Drip rate = flow rate × drop factor

Given that:

Drip rate = 60 gtt / min, Flow rate = volume / time = 500 ml / t, drop factor = 30 gtt/ml

Drip rate = flow rate × drop factor

60 = 500 / t × 30

500 / t = 60/30

500 / t = 2

2t = 500

t = 500/2

t = 250 mins

1 hr = 60 min

t = 250 / 60 hours = 4.167 hours

Answer:

Does the rate of decay have an effect on the amount of gas produced?

Which brand of stain remover is the best for getting out laundry stains?

Explanation:

I just did it on Edge

Answer:

Does the rate of decay have an effect on the amount of gas produced?

Which brand of stain remover is the best for getting out laundry stains?

Explanation:

I just did the assignment

Answer:

Statement 1: All living matter at the smallest level is made of cells

Explamation:

All living things are made of cells; the cell itself is the smallest fundamental unit of structure and function in living organisms.

Hope this helps

Answer:

I would say A or C

Explanation: Because Statement 1 sounds like an everyday theory and my other question is Both because they sound the same but... I'm really confused about these Questions Hope I will find my answer

And Please mark me as brainliest

Answer:

[tex]Precision = 2.70 \± 0.1\ cm[/tex]

Explanation:

Given

The data in the table

Required

Follow the steps appended to the question;

Step 1: Calculate the Mean or Average

Mean = Summation of lengths divided by number of teams;

[tex]Mean = \frac{2.65 + 2.75 + 2.80 + 2.77 + 2.60 + 2.65 + 2.68}{7}\ cm[/tex]

[tex]Mean = \frac{18.9}{7}\ cm[/tex]

[tex]Mean = 2.70\ cm[/tex]

Step 2: Get The Range

[tex]Range = Highest - Lowest[/tex]

[tex]Range = 2.80cm - 2.60cm[/tex]

[tex]Range = 0.2\ cm[/tex]

Step 3: Divide Range by 2

[tex]Approximate\ Range = \frac{1}{2}Range[/tex]

[tex]Approximate\ Range = \frac{1}{2} * 0.2\ cm[/tex]

[tex]Approximate\ Range = 0.1\ cm[/tex]

Step 4: Determine the Precision

[tex]Precision = Average \± Approximate\ Range[/tex]

Substitute 2.70 for Average and 0.1 for Approximate Range

[tex]Precision = 2.70 \± 0.1\ cm[/tex]

Answer:

The number of pounds of helium  n = 666.995 lbm

Explanation:

Given that :

the volume V = 68000 ft³

the temperature T = 80 f = (80 + 460)°R =540°R

the pressure P = 14.2 psia

Using the ideal gas equation PV =nRT to determine the number of pounds of helium within, we have :

n = PV/RT

where;

R = 2.6809 psia. ft³/lbm.R        (from the tables of A-1E for helium)

n = (14.2 × 68000)/(2.6809 × 540)

n = 965600/1447.686

n = 666.995 lbm

∴

The number of pounds of helium  n = 666.995 lbm

Answer:

NO!

Explanation:

Not considering isotopes for the moment.  All the atoms of any one element have the same mass.   From the periodic table,  and using whole numbers, you may note that the mass of one atom of hydrogen is one atomic mass unit (amu) and the mass of one carbon atom is 12 amu

So, the one carbon (C) atom is 12 times more massive than one hydrogen (H) atom

If you have the same number or each  the carbon atoms will always be 12 times more massive.

The fundamental, concept, is that (again neglecting isotopes) since all the atoms of any one element are the same, we count out atoms by massing the atoms.   We choose to measure masses in grams, and the counting units is the mole--a number.   Like we count out eggs by the number 12, which we call a dozen,   we count out atoms by the number mole which is a huge, huge number 6.02  x 10 to the 23rd power.  

To comprehend how large the number mole is, I had various students count out a mole of atoms or a mole of molecules by massing them, and then each brought the mole of what they had into a gym which measured 100ft by 100ft.  

The question then became, if you had a mole of raindrops, average diameter 0,04cm, how high would the gym walls have to be to hold the mole of raindrops, assuming no compressing of the water molecules.

The answer is nearly 1,000 times the distance between the earth and the moon.   The reaction is WOW, they must be so small,   YEP!

They got extra credit if they could come up with another accurate and fun way of describing the number mole.

No! because they have different mass.

Element are made of atoms which are the same. Element do have different mass number. Because there is a dozen atom of carbon and a dozen atom of iron does not make but have the same mass.

The atoms of Iron are different from that of gold and carbon and as such will not have the same mass number.

Conclusively, The average atomic mass of an element can be gotten fromthe periodic table.

Answer:

Explanation:

Problem:

In a gender based experiment, the blood pressure of different ages of men is been checked and recorded to determine if there is any correlation. What will be the independent, dependent and controlled variables?

Answer:

A controlled variable is the variable that is left constant throughout the course of an experiment. The controlled variable here is the gender.

A dependent variable is the variable that is been determined or measured during the course of an experiment. The dependent variable here is the blood pressure.

An independent variable is the variable that is intentionally or decidedly altered during the course of an experiment. The independent variable here is the age.

Answer:

B. Schleiden

Explanation:

i just took the test

Answer:hooke

Explanation:me when your mom

Answer:

361.0 milimoles of nickel chloride

Explanation:

Mili is a unit prefix that represents 1/1000 of the measured value. The multiplication of molarity with volume in liters gives the moles:

190.0mL = 0.190L * (1.90 moles / L) = 0.361 moles -Are moles of NiCl2.

Now, to convert moles to milimoles you must use 1 mole = 1000 milimoles thus:

0.361 moles * (1000 milimoles / 1 mole) =