Compounds with a limited solubility in water and a high vapour pressure are known as volatile organic compounds. Many VOCs are compounds created by humans and employed in the production of paints, medications, and refrigerants
Thus, VOCs are often fuel oxygenates like methyl tert-butyl ether (MTBE), industrial solvents like trichloroethylene, or byproducts of chlorination in water treatment like chloroform and solubility.
Petroleum fuels, hydraulic fluids, paint thinners, and dry cleaning products all frequently include VOCs. VOCs are typical pollutants in groundwater.
Certain solids or liquids emit volatile organic compounds (VOCs) as gases. Many different compounds are included in VOCs, some of which may have negative short- and long-term health impacts.
Thus, Compounds with a limited solubility in water and a high vapour pressure are known as volatile organic compounds. Many VOCs are compounds created by humans and employed in the production of paints, medications, and refrigerants.
Learn more about Volatile substance, refer to the link:
https://brainly.com/question/30905318
#SPJ12
On the taxi Check, the magnetic compass should
A. swing opposite to the direction of tirn when turning from north.
B. Exhibit the same number of degrees of dip as the latitude
C. Swing Freely and indicate known headings
The magnetic compass on the cab should swing freely and display known headings. Hence, the correct option is (C).
A magnetic compass on a taxi check (an aviation pre-flight inspection) should swing freely, meaning it should not be influenced by any metallic or magnetic objects, and indicate accurate headings. The compass should be checked to see that it is functioning properly and aligned with the aircraft's heading during the taxi check. The magnetic compass is an important navigation tool for pilots, and it is essential that it is functioning correctly before takeoff.
To know more about magnetic please refer: https://brainly.com/question/24397546
#SPJ4
Two masses m and 2m approach each other along a path right angle to each other. After collision they stick together and move off at 2m/s at angle 37° to the original direction of the mass m what where the initial speed of the two particles?
The initial speed of the mass "m" object is 4.79 m/s, while the initial speed of the mass "2m" object is 1.81 m/s.
the two masses' initial motional speed
Applying the law of conservation of linear momentum, the two masses' initial speed is determined as follows: m1u1 + m2u2 = v(m1 + m2).
Angle between the two masses is equal to 90 degrees if m is in the horizontal direction and 2m is in the vertical direction.
What do starting and final speeds mean?When gravity first exerts force on an object, its initial velocity defines how quickly the object moves. The final velocity, on the other hand, is a vector number that gauges a moving body's speed and direction after it has reached its maximum acceleration.
To know more about Intial speed visit:
https://brainly.com/question/21336851
#SPJ4
A 50,000kg comet is at rest in space. A nuclear explosion spilts the comet into two pieces. If the 35,000kg piece moves away +5m/s, what is the velocity of the second piece?
Answer:
-11.67 m/s.
Explanation:
The velocity of the second piece can be determined by the law of conservation of momentum, which states that the total momentum of a closed system remains constant.
Let's call the velocity of the second piece "v".
Before the explosion, the total momentum of the comet is 0 (since it is at rest). After the explosion, the total momentum of the two pieces is
(35,000 kg)(5 m/s) + (15,000 kg)(v).
Using the law of conservation of momentum, we can set these two momenta equal to each other and solve for v:
0 = (35,000 kg)(5 m/s) + (15,000 kg)(v)
0 = 175,000 kg m/s + 15,000 kg v
-175,000 kg m/s = 15,000 kg v
v = -11.67 m/s
So the velocity of the second piece is -11.67 m/s.
the graph below shows the velocity versus time for an object from t = 0 to t = 10 s. what is the total distance traveled by the object during this time interval?
Distance travelled by object from 0 to 10 seconds is 50 m. We can calculate it using equation of motion.
We need to calculate the distance from 0 to 10 seconds for the object.
As in the question, acceleration is constant, we can thus utilize the equation of motion to calculate the value of distance using magnitudes of time and acceleration.
The equations of motion describe the time evolution of an object's position and velocity in a given force field.
[tex]s = ut + (1/2)at^{2}[/tex]
Insert the given values, and we get:
s = 2*10 + (1/2)*0.6*10*10S = 50 m
Therefore, distance is 50 m. As velocity is continuously increasing in magnitude, displacement will also be equivalent to the distance.
Learn more about distance here:
https://brainly.com/question/30289275
#SPJ4
Complete question: Image of the graph has been uploaded.
Start and Tony step onto the dance floor about 20. m apart at the Junior Prom and they feel an attraction to each other. If Tony's mass is 70. kg and Star's mass is 50. kg, assume the attraction is gravity and calculate its magnitude.
The magnitude of the force of attraction between Star and Tony, given that they are 20 m apart is 5.84×10¯¹⁰ N
How do I determine the magnitude of the force of attraction?From the question given above, the following data were obtained:
Mass of Tony (M₁) = 70.0 KgMass of Star (M₂) = 50.0 KgDistance apart (r) = 20 mGravitational constant (G) = 6.67×10¯¹¹ Nm²/Kg²Magnitute of force of attraction (F) =?Applying the Newton's law of universal gravity formula, we can obtain the magnitude of the force of attraction between Star and Tony as illustrated below:
F = GM₁M₂ / r²
F = (6.67×10¯¹¹ × 70 × 50) / 20²
F = 0.00000023345 / 400
F = 5.84×10¯¹⁰ N
Thus, from the above calculation, we can conclude that the magnitude of the force between them is 5.84×10¯¹⁰ N
Learn more about force of attraction:
https://brainly.com/question/2900681
#SPJ1
What causes the apparent retrograde motion of the planets in the heliocentric model?
A planet travelling more quickly than another catches up to and passes one that is moving more slowly in a heliocentric model.
What motion of the planets in the heliocentric model?According to the heliocentric hypothesis, Mars only appears to travel backward as Earth passes it during its orbit around the Sun.
Retrograde motion is explained by the heliocentric theory as being brought on by the Earth and an outer planet, such as Mars, moving at the same time.
However, on occasion they appear to briefly stall in their eastward travel and then migrate westward (backwards) in front of the stars for a few months.
As evidenced by this demonstration, the Earth moves faster in its orbit and, in effect, catches up with Mars's slower motion.
Therefore, The motion seems to be going through a pro-retro-pro cycle as we close in on and then pass beyond the orbit of that planet.
Learn more about heliocentric model here:
https://brainly.com/question/19757858
#SPJ4
A planet travelling more quickly than another catches up to and passes one that is moving more slowly in a heliocentric model.
What motion of the planets in the heliocentric model?According to the heliocentric hypothesis, Mars only appears to travel backward as Earth passes it during its orbit around the Sun.
Retrograde motion is explained by the heliocentric theory as being brought on by the Earth and an outer planet, such as Mars, moving at the same time.
However, on occasion they appear to briefly stall in their eastward travel and then migrate westward (backwards) in front of the stars for a few months.
As evidenced by this demonstration, the Earth moves faster in its orbit and, in effect, catches up with Mars's slower motion.
Therefore, The motion seems to be going through a pro-retro-pro cycle as we close in on and then pass beyond the orbit of that planet.
Learn more about heliocentric model here:
brainly.com/question/19757858
#SPJ4
When does the sun orbit closes to sagittarius a*?
The sun takes 230 million years to complete a single revolution about Sagittarius A*.
What is a black hole? What is gravitational singularity?A black hole is a region of spacetime where gravity is so strong that nothing, including light or other electromagnetic waves, has enough energy to escape its event horizon.A gravitational singularity, spacetime singularity or simply singularity is a condition in which gravity is so intense that spacetime itself breaks down catastrophically.Given is that sun orbit closes to Sagittarius A*.
Everything in our 13.6 billion-year-old galaxy orbits Sagittarius A*, including our solar system, which is located 26000 light years away.It takes the solar system about 230 million years to complete a single revolution. The solar system's orbit isn't a smooth path, though.Therefore, the sun takes 230 million years to complete a single revolution about Sagittarius A*.
To solve more questions on black hole, visit the link below -
https://brainly.com/question/16181720
#SPJ1
what is the magnetic flux through the loop when it is tilted at a 60 ∘∘ angle?
The tilt angle and magnetic field intensity affect the magnetic flux passing through the loop.
Given these variables, the magnetic flux can be calculated using a mathematical expression.
The number of magnetic field lines that travel through a specific surface is measured by magnetic flux. The magnetic field is tilted at an angle of 60 degrees with regard to the loop's plane in this situation, and the surface is a loop. The strength of the magnetic field and the tilt angle must be known in order to compute the magnetic flux. With this knowledge, it is possible to calculate the magnetic field line density on the loop, which is inversely proportional to the magnetic flux.
Learn more about magnetic field here;
https://brainly.com/question/3623596
#SPJ4
Classify each measurement as a scaled or vector a 20 books on a shelf
a) Scalar quantity, b) Vector quantity, c) Vector quantity, d) Scalar quantity, e) Vector quantity, f) Scalar quantity, g) Scalar quantity, h) Scalar quantity.
What is the difference between scalar and vector quantity?A scalar quantity is a physical quantity with a single numerical value. Scalar quantities include mass, temperature, and velocity.
A vector quantity is a physical quantity that has a magnitude as well as a direction. Displacement, velocity, and acceleration are examples of vector quantities. Scalar quantities may be stated as a single numerical value, but vector quantities must be expressed as a magnitude and a direction.
In physics, vector quantities are frequently employed to describe physical qualities such as force, velocity, and acceleration. The parallelogram technique can be used to add and subtract vector values. Scalar quantities, on the other hand, cannot be added or subtracted in the same way. Scalar quantities are easily added and subtracted.
To know more about scalar quantity, visit
brainly.com/question/774036
#SPJ1
EXERCISE 9 THE EVOLUTION OF BIPEDALISM: POSTURAL FEEDING Work in a small group or alone to complete this exercise In this lab, we considered several different explanations for the evolution of bipedalism. In this exercise, we will take a closer look at the postural feeding hypothesis. According to the postural feeding hypothesis, bipedalism evolved os on extension of existing upright feeding postures common among opes. If this hypothesis is correct, it would mean that bipedalism evolved initially to suit feeding from trees, rather than to s STEP 1 Review the data provided in the table below. (These data come from several different research studies, which were compiled by biological anthropologist Kevin D. Hunt. They provide a general sense of the pat- terns of posture and locomotion among living ape species.) Percentage of Posture That Is Suspensory Arm-Hanging Percentage of Posture That is Bipedal Standing Percentage of Movement that is Bipedal Walking Type of Primate Environment Papio anubis (baboon) Open forest/savanna 0.2 0.1 Hylobates syndactylus Siamang) Closed forest/dense tree cover 61.7 Closed forest/dense tree cover Pongo pygmaeus (orangutan) Pan paniscus (bonobo) Closed forest/dense tree cover Open forest/savanna Pan troglodytes (chimpanzee) STEP 2 Analyze the data and look for patterns. 1. In general, which primates engage in more suspensory arm-hanging the baboon or the apes? 2. Which two primates engage in the most suspensory arm-hanging? What environment do they live in? 3. Which primate engages in the most bipedal standing? What environment does it live in? 4. Which two primates engage in the most bipedal walking? What environment do they live in? STEP 3 Interpret the data, 5. Based on the patterns you identified above, do you think the ape lineage was more likely to become bipedal than the other primates? Why or why not? 6. Based on the patterns you identified above, is an open forest (or savanna) environment necessary for the evolution of bipedalism? Why or why not? 7. Do the data presented here support the postural feeding hypothesis? Why or why not?
Step 2 Answer: Apes, in general, engage in greater suspensory arm-hanging than baboons. The most tense arm-hanging is between Siamang and an orangutan.
They reside in tight woodland/closed forest. Bonobo maintains the most bipedal posture. It dwells in a savanna/open forest setting. The most bipedal walking is done by baboons and chimps. They dwell in a savanna/open forest setting. Step 3's answer is: 5. Based on the trends observed above, it is impossible to say if the ape lineage was more likely than the other primates to become bipedal. According to the statistics, orangutans and siamangs participate in the most suspensory arm-hanging, whereas bonobos and baboons engage in the most bipedal standing and walking. It is impossible to draw any conclusions based on the patterns.
learn more about forest here:
https://brainly.com/question/3530564
#SPJ4
How many grams are in 1 mole?
Avogadro's number, or about 6.022 x 1023 particles, is the unit of measurement for the amount of a substance that makes up one mole.
What is mole?A substance's atomic or molecular weight in grammes is equal to the mass of one mole of the substance.
Chemistry counts the amount of atoms, ions, or molecules in a compound using the mole concept. The mole is a helpful unit of measurement for converting a substance's mass in grammes from its number of particles.
For instance, a mole of water molecules weighs 18 pounds while a mole of carbon atoms weighs 12 kg.
As a result, the mole is a key idea for comprehending the quantitative parts of chemistry and is employed in many different chemical computations.
To know more about mole, visit:
https://brainly.com/question/28239680
#SPJ4
2. according to grove & gray (2019), what are the potential biases of convenience sampling?
Convenience sampling has several potential biases that can impact the validity of a study. It is important for researchers to be aware of these biases and to consider alternative sampling methods, such as stratified or random sampling, to ensure that their sample is representative of the population of interest.
Convenience sampling is a type of sampling method where the researcher selects participants who are easily accessible and willing to participate in the study. It is often used in qualitative research and in situations where the researcher has limited resources, such as time and budget. However, convenience sampling has several potential biases that can impact the results of a study and compromise its validity.
One of the main biases of convenience sampling is selection bias. This occurs when the sample is not representative of the population of interest, leading to an over- or under-representation of certain groups. For example, if a researcher conducts a survey on drug use among high school students and only surveys students who are present during lunchtime, they may miss the experiences and perspectives of students who are absent during that time or have different lunch periods.
Another potential bias of convenience sampling is response bias, which occurs when participants do not answer questions truthfully or accurately. This can happen if participants feel pressure to provide socially desirable answers, or if they are not motivated to participate in the study. For example, if a researcher conducts a survey on alcohol use among college students and only surveys students who are present in the student union building, they may miss the experiences and perspectives of students who do not use that building.
Finally, convenience sampling can also lead to bias in the results if the participants are not diverse enough in terms of their demographic characteristics, such as age, gender, ethnicity, or socio-economic status. This can limit the generalizability of the results to other populations, as the findings may not be representative of the broader population of interest.
Here you can learn more about convenience sampling
https://brainly.com/question/1413932#
#SPJ11
Three identical charges of 4.00 μC are placed at the positions (0.20 m, 0, 0), (0, 0.20 m, 0) and (0, 0, 0.20 m). What is the magnitude of the force on any one of the charges?
a.3.6 N
b.0.0 N
c.3.1 N
d.7.2 N
Option a. The three charges are placed at the vertices of an equilateral triangle, with each side length equal to 0.20 m. Since the charges are identical and the distances between them are equal.
The force on a point charge q due to another point charge Q is given by Coulomb's law:
[tex]F = k * (q * Q) / r^2[/tex]
where k is the Coulomb constant ([tex]8.99 * 10^9 N m^2 / C^2[/tex]), q and Q are the magnitudes of the charges, and r is the distance between the charges.
In this case,[tex]q = 4.00 * 10^-6 C[/tex] and [tex]Q = 4.00 * 10^-6 C[/tex], so the magnitude of the force between two charges is given by:
[tex]F = k * (q * Q) / r^2\\ \\ = (8.99 * 10^9 N m^2 / C^2) * (4.00 * 10^-6 C)^2 / (0.20 m)^2\\ \\ = 3.6 N[/tex]
Since there are three charges, each charge experiences three forces in different directions due to the other two charges. The net force on a charge is the vector sum of these three forces. If the charges are placed at the given positions, the net force on a charge will be zero, as the forces cancel each other out.
To learn more about vertices please click on below link
https://brainly.com/question/30116773
#SPJ4
In a motor, what do the combined effect of electric currents and magnetic forces turn electrical energy into?.
Electrical energy is converted to mechanical work in a motor.
What happens when electricity is transferred in a motor?
The kinetic energy produced by the vehicle's motor is converted from the electric potential energy to the electric current. The rotation of a rotor in a motor generates kinetic energy, which is the energy of motion. The wheels can turn because of the energy the rotating rotor transfers to them.
Electrical energy is transformed into rotational kinetic energy, a type of mechanical energy, using an electric motor. Electric fans, pumps, and other devices employ electric motors. Electrical energy is transformed into kinetic energy by an electric motor, however some of the electrical energy is lost during this process to thermal energy.
To learn more about electrical energy use link below:
https://brainly.com/question/60890
#SPJ4
When the bicycle passes point A, it has a speed of 9m/s, which is increasing at a rate of v'=0.2m/s^2. Determine the magnitude of its acceleration when it is at point A.
When a bicycle is at point A and travelling at a speed of 9 m/s, its magnitude increases at a rate of v' = 0.2 m/s2, or by 0.2 m/s2.
The rate at which velocity changes in relation to time is known as acceleration, and it is a vector quantity that has both magnitude and direction. The bicycle's acceleration at point A in this scenario is equal to 0.2m/s2, as the bicycle's velocity is rising at a constant rate of 0.2m/s2. Accordingly, the bicycle's speed is growing by 0.2 m/s every second and will keep doing so until a net force intervene to slow it down or stop it.This data gives a snapshot of the bicycle's motion at a particular moment in time (when it passes point A). By integrating the acceleration and using the kinematic equations of motion, which relate velocity, magnitude, position, and time, it would be possible to calculate the bicycle's future velocities and positions.
Learn more about magnitube here:
https://brainly.com/question/14452091
#SPJ4
:As the two foci of an ellipse are brought together, the shape of the ellipse becomes ________.
A) more like a line between the foci.
B) more like a circle around the foci.
C) more like a triangle drawn around the foci.
D) more like a sphere around the foci.
As the two foci of an ellipse are brought together, the shape of the ellipse becomes B) more like a circle around the foci.
What is the Foci of an Ellipse?The two reference points that aid in drawing the ellipse are its foci. The ellipse's foci are equidistant from the origin and located on its primary axis.
The locus of a point, whose sum of the distances from the two fixed points is a constant value, is represented by an ellipse.
Hence, as they come closer and closer, the shape of the ellipse becomes B) more like a circle around the foci.
Read more about ellipse here:
https://brainly.com/question/28991074
#SPJ1
g a high tension power line develops a net charge per unit length of 5.3 x 10-7 c/m when in use. (model this as an infinite linear charge.) what is the magnitude of the electric field on the ground a distance of 12 m from the wire?
A high-tension power line develops a net charge per unit length of 5.3 x 10⁻⁷ C/m. The magnitude of the electric field on the ground at a distance of 12 m from the wire is 7.95×10² N/C.
Consider an infinitely long straight, uniformly charged wire. Let the linear charge density of this wire be λ. P is the point that is located at a perpendicular distance from the wire. The distance between point P and the wire is r. The electric field is due to infinite line charge, E=λ/2πε0r. The net charge per unit length,λ =5.3 x 10⁻⁷ C/m. The distance from the wire,r= 12m. The electric field due to infinite line charge, E=λ/2πε0r = 5.3×10⁻⁷×2×9×10⁹/ 12= 7.95 ×10² N/C.
For further learning about electric fields due to infinite line charge, refer to the link:
https://brainly.com/question/18723369
#SPJ4
Maddie is on the weightlifting team at her school. She must lift as much weight as possible from the ground to a straight up standing position. How much work will maddie do if she uses a force of 6 n to lift 150 kg of weight to a height of 1. 5 m?.
The work done by Maddie to lift the weight of 150kg to a height of about 1.5 meters by a force of 6N is 9 Joules.
What is Work done?Work is the energy which is transferred to or from an object through the application of force which is along the direction of the displacement. For a constant force aligned with the direction of motion, the work done by the object equals to the product of the force strength and the distance traveled by that object.
Work done = f × s
f = force applied,
s = distance or displacement of the object
W = 6 × 1.5
W = 9 Joules
Therefore, the work done by Maddie is 9 Joules.
Learn more about Work done here:
https://brainly.com/question/13662169
#SPJ1
how to turn a temporary magnet thats made out of magnetic materials turn into a permanent magnet
A: heat the temporary magnet then put it in a magnetic field
B: heat it then make it cool down and put it in a magnetic field
C: put the magnet in a magnetic field for a long time
D: All of the ways work
Answer: B
Explanation:
If the magnetic field applied to a temporary magnet is too strong, then the temporary magnet may align its atom and convert into a permanent magnet.
For the circuit shown in the following diagram. What is the value of(i) Current through 6Ω resistor?(ii) P.D. across 12Ω resistor ?
Part (i) Current through resistor of 6Ω: I = 0.45 V.
Part ii) P.D. across resistor of 12Ω: I = 0.27 A
Explain the term potential difference?The difference in charge carriers' energy between two places in a circuit is known as the potential difference. Voltage measured: Voltage is another name for potential difference (p.d.), which is expressed in volts (V).Part (i) Current through resistor of 6Ω
R = 6 + 3 = 9Ω
Voltage V = 4V
I = V/ R = 4/9
I = 0.45 V
Part ii) P.D. across resistor of 12Ω.
R = 12 + 3 = 15Ω
I = V/R = 4/15
I = 0.27 A
To know more about the potential difference, here
https://brainly.com/question/24142403
#SPJ4
what is the mathematical relationship between spring force and the stretch of a spring?
The mathematical relationship between spring force and the stretch of a spring is F = - k x, where k is spring constant and x is the extension of the spring.
A spring is a material that may be bent by an external force before resuming its original shape.
Many of us use springs on a daily basis, yet we frequently ignore their inertia by treating them like massless objects. A spring's ability to experience displacement when stretched, compression when compacted, and return to equilibrium when free is a very casual process. This fact demonstrates that a spring compresses or stretches a body by applying an equal and opposite force.
To know more about force:
https://brainly.com/question/14203163
#SPJ4
On a day when the temperature is 30° Celsius, a cool drink is taken from a refrigerator whose temperature is 5º. If the temperature of the drink is 20° after 10 minutes, what will its temperature be after 35 minutes? Answer: 29 °C (whole number)
The temperature of the drink will approach the room temperature as time passes. After 35 minutes, the temperature of the drink is likely to be close to the room temperature of 30° Celsius.
It's not possible to determine the exact temperature without additional information about the specific heat capacity and heat transfer rate of the drink and the surrounding environment. The rate of temperature change, can be affected by various factors such as the type of drink, the material of the container, and the surrounding environment. But an estimate of 29°C is reasonable based on the information given.
The temperature change of a substance over time can be modeled by the formula:
ΔT = k * t
where ΔT is the change in temperature, k is the cooling constant (representing how quickly the temperature decreases), and t is the time elapsed.
Learn more about specific heat capacity here:
https://brainly.com/question/16952828
#SPJ4
What is the relationship between electric field magnitude just outside a conductor, and the charge density on the surface of the conductor?
Answer:The divergence of the electric field at a point in space is equal to the charge density divided by the permittivity of space.
Explanation
The magnitude of the electric field just outside a charged conductor is proportional to the surface charge density σ. (just a cylinder) through the surface of the conductor, then using what we've just discovered: – E = 0 inside a conductor.
how is heat capacity ratio determined experimentally
Heat capacity ratio is determined experimentally by measuring the change in temperature of a gas in response to the addition or removal of heat.
The heat capacity ratio, also known as the adiabatic index, is defined as the ratio of the heat capacity at constant pressure to the heat capacity at constant volume.
To experimentally determine the heat capacity ratio, a sample of gas is subjected to changes in temperature while its pressure and volume are carefully monitored. The change in temperature can be caused by adding or removing heat, or by changing the pressure of the gas through a piston or other mechanism.
The heat capacities at constant pressure and constant volume can then be calculated from the data, and the heat capacity ratio can be determined as their ratio. This measurement can provide valuable information about the thermodynamic properties of gases and can be used to better understand their behavior in different conditions.
To know more about adiabatic index click on the link below:
https://brainly.com/question/28465170#
#SPJ11
what four things did plato want to get rid of
Plato wanted to get rid of four things in society - ignorance, poverty, disease, and injustice.
Plato was a Greek philosopher who lived between 427-347 BCE. He was a student of Socrates and a teacher of Aristotle. He is considered one of the most important figures in Western philosophy. Plato's philosophy is centered around his ideal Republic, which he describes in his book "The Republic".
In "The Republic", Plato argues that the ideal society must get rid of four things in order to be just and harmonious. The first is ignorance. Plato believed that ignorance was the root of all evil and that people needed to be educated in order to live virtuous lives. He argued that education should be provided to everyone, regardless of social class, and that it should focus on the development of virtue and wisdom.
The second thing that Plato wanted to get rid of was poverty. He believed that poverty was a major source of social unrest and that it prevented people from living good lives. He argued that the state should take care of its citizens by providing them with the basic necessities of life, such as food, clothing, and shelter.
The third thing that Plato wanted to get rid of was disease. He believed that physical health was essential to living a good life and that the state should take steps to prevent and cure diseases. He believed that the state should provide access to medical care and that it should invest in public health initiatives.
Finally, Plato wanted to get rid of injustice. He believed that justice was the cornerstone of a just society and that it should be upheld at all times. He argued that the state should have a system of laws that was fair and impartial, and that it should ensure that everyone was treated equally. He believed that the state should punish those who committed crimes and that it should ensure that everyone had access to the same opportunities in life.
To know more about Plato here:
https://brainly.com/question/5399979#
#SPJ11
what is the acceleration at time 11.25 s?
The acceleration at time 11.25 seconds cannot be determined without more information.
Acceleration is the rate of change of velocity, so it can be calculated by the rate of change of the velocity at 11.25 seconds. This would require knowing the velocity at 11.25 seconds and at least one other point in time.The rate at which velocity varies with respect to time is referred to as acceleration. Since acceleration has both a magnitude and a direction, it is a vector quantity. Additionally, it is the first derivative of velocity with respect to time or the second derivative of position with respect to time.
Acceleration formula is given as:
[tex]acceleration=\frac{(final velocity)-(initial velocity)}{time}\\\\acceleration=\frac{change in velocity}{time}[/tex]
Without further details, it is impossible to calculate the acceleration at time 11.25 seconds.
learn more about Acceleration Refer:brainly.com/question/2303856
#SPJ4
What are some some examples of estimator variables (forensics)
Answer:
Estimator variables are those that cannot be controlled by the criminal justice system. They include simple factors like the lighting when the crime took place or the distance from which the witness saw the perpetrator.
Explanation:
At the gym, a woman lifts 40 kilograms of weights on the leg press machine. It takes her 0. 5 seconds to raise the weights a vertical distance of 0. 4 meters. How much power does the woman generate when lifting the weights?.
The power applied by the woman on 40 kg mass is 313.6 W
Mass lifted by the woman, m = 40 kg
Height of the mass h = 0.4 m
Time taken for lifting the mass, t = 0.5 s
Work done by the woman is given by: W = m.g.h
Work done = W = 40 x 9.8 x 0.4
Work done = 156.8 J
Now let's calculate the power delivered by the woman which is
P = W/t
P = 156.8/0.5 = 313.6 watts
Thus, the power applied by the woman is 313.6 W.
If you need to learn more about Power click here:
https://brainly.com/question/25864308
#SPJ4
it takes 250.0 j to raise the temperature of a 50.0 g sample of a metal by 10.0°c. what is the specific heat capacity of this metal?
The specific heat capacity of this metal is 0.5J/g°C when it takes 250.0 j to raise the temperature of a 50.0 g sample of a metal by 10.0°C.
Given the mass of metal (m) = 50g
The temperature of metal is raised to (T) = 10.0°C.
The heat required to raise the temperature of metal (Q) = 250j
Let the specific heat of metal = c
We know that q = mcΔT where q is the heat absorbed , m is the mass, c is the specific heat heat and T is the temperature change.
Such that, c = q/mΔT
c = 250/50 x 10 = 0.5J/g°C
Hence, the required specific heat capacity of the metal is 0.5J/g°C
To learn more about specific heat click here https://brainly.com/question/1747943
#SPJ4
Ariana is accelerating her car at a rate of 4. 6 m/s2 for 10 seconds. Her starting velocity was 0 m/s.
The final velocity of car is 46 m/s.
We know that from newton's equation of motion,
v = u+at
Where,
v = final speed
u = initial speed = 0
a = acceleration = 4.6 m/s^2
t = time= 10 sec
Putting these these values in above equation we get: v = 46 m/s.
The action of one body on another in the form of pull or push is called a force. Mutual interaction between two bodies, which produce a force on one body, also produces a force on another body. The force applied by the body the other is known as reaction and the force on the body under study is known as Action.
To know more about kinematics visit:
https://brainly.com/question/910345
#SPJ4