According to the __________ principle, the last number name differs from the previous ones in a counting sequence by denoting the number of objects.

a. Therefore, the distribution of X is: P(X=3) = 1/9
b. E(X) = 1(1/9) + 2(2/3) + 3(1/9) = 2
Therefore, the expected value of X is 2.

a. Find the distribution of X:

Since there are 3 possible outcomes on each spinner (1, 2, or 3), there are a total of 3 x 3 = 9 possible pairs of outcomes. We can list them as follows:

(1,1), (1,2), (1,3)
(2,1), (2,2), (2,3)
(3,1), (3,2), (3,3)

Now, we need to find the probability distribution of the maximum value (X) of the two spinners:

1. X = 1: This occurs only when both spinners show a 1, which is 1 out of the 9 total outcomes. Thus, P(X=1) = 1/9.

2. X = 2: This occurs when either both spinners show a 2 or one of them shows a 1 and the other shows a 2. There are 3 such pairs: (1,2), (2,1), and (2,2). So, P(X=2) = 3/9 = 1/3.

3. X = 3: This occurs when at least one spinner shows a 3. There are 5 such pairs: (1,3), (2,3), (3,1), (3,2), and (3,3). Thus, P(X=3) = 5/9.

b. Calculate E(X):

E(X) represents the expected value of the maximum of the two spinners. We calculate it as follows:

E(X) = (1 * P(X=1)) + (2 * P(X=2)) + (3 * P(X=3))
E(X) = (1 * 1/9) + (2 * 1/3) + (3 * 5/9)
E(X) = (1/9) + (2/3) + (15/9)
E(X) = (1 + 6 + 15) / 9
E(X) = 22/9

So, the expected value E(X) is 22/9.

Learn more about Distribution

brainly.com/question/31197941

#SPJ11

The probability that the average change in earnings over the next five years will be greater than 15.5% is 0.0228 or about 2.28%.

The average change in earnings over the next five years is the sample mean of five independent observations of percentage changes in earnings. The distribution of the sample mean can be approximated by a normal distribution with mean μ = 5% and standard deviation σ/√n = 12%/√5 ≈ 5.38%.

To find the probability that the sample mean is greater than 15.5%, we standardize the variable:

Z = ([tex]\bar{X}[/tex] - μ) / (σ/√n) = (15.5% - 5%) / (12%/√5) ≈ 2.75

Using a calculator, we can find that the probability of a standard normal variable being greater than 2.75 is about 0.00228, or approximately 0.0228 or 2.28%.

Therefore, the probability is approximately 2.28%.

To know more about probability, refer here:

https://brainly.com/question/30034780#

#SPJ11

To find next year's population in one step, we need to multiply the current population by the decay factor of 0.974.

To find next year's population in one step, we need to multiply the current population by the growth factor. However, in this case, the population is decreasing by 2.6% per year, which means that we need to use a decay factor instead of a growth factor.

To calculate the decay factor, we first need to convert the percentage into a decimal. We can do this by dividing the percentage by 100, which gives us 0.026. This represents the rate of decrease per year.

Next, we can calculate the decay factor by subtracting the rate of decrease from 1. For example, if the rate of decrease was 10%, the decay factor would be 1 - 0.1 = 0.9. In this case, since the rate of decrease is 2.6%, the decay factor is 1 - 0.026 = 0.974.

Therefore, to find next year's population in one step, we need to multiply the current population by the decay factor of 0.974. For example, if the current population is 100,000, we would calculate next year's population as follows:

Next year's population = current population x decay factor
Next year's population = 100,000 x 0.974
Next year's population = 97,400

So, next year's population would be 97,400 if the current population is 100,000 and the population is decreasing by 2.6% per year.

To know more about decay factor, refer to the link below:

https://brainly.com/question/29194887#

#SPJ11

Confidence intervals are used to estimate the range of values in which a true population parameter is likely to lie.

One example where confidence interval must be used for statistical inference is when we want to estimate the mean or proportion of a population based on a sample.

For instance, if we want to estimate the average weight of adult females in a city, we can take a random sample of 100 women and calculate the sample mean and standard deviation.

We can then construct a 95% confidence interval for the population mean weight using the sample data and statistical formulas.

This interval provides us with a range of plausible values for the population mean weight with a 95% level of confidence. Hypothesis testing is used to determine whether a given hypothesis about a population parameter is supported by the sample data or not.

One example where hypothesis testing must be used for statistical inference is when we want to compare two population means or proportions based on their sample estimates.

For instance, if we want to test whether there is a significant difference in the mean salary between male and female employees in a company, we can take a random sample of 50 male and 50 female employees and calculate their sample means and standard deviations.

We can then use a t-test or z-test to test the null hypothesis that the population means are equal versus the alternative hypothesis that they are not equal.

If the p-value of the test statistic is less than the significance level, we reject the null hypothesis and conclude that there is a significant difference between the two population means at that level of significance.

P-value is the probability of observing a test statistic as extreme or more extreme than the one calculated from the sample data, assuming the null hypothesis is true.

It measures the strength of evidence against the null hypothesis and is used to make a decision about whether to reject or fail to reject the null hypothesis.

A smaller p-value indicates stronger evidence against the null hypothesis and supports the alternative hypothesis.

Typically, a significance level of 0.05 or less is used to determine whether the p-value is statistically significant or not.

To know more about probability click here

brainly.com/question/15124899

#SPJ11

The volume of the  is right triangular prism is   600 cubic feet.

In a right triangular prism, the area of the triangular base is 50 square feet, and the height of the prism is 12 feet. To find the volume of the prism, we can use the formula:

Volume = Base Area × Height

Step 1: Identify the base area, which is given as 50 square feet.
Step 2: Identify the height of the prism, which is given as 12 feet.
Step 3: Multiply the base area by the height to find the volume.

Volume = 50 square feet × 12 feet = 600 cubic feet

So, the volume of the right triangular prism is 600 cubic feet.

To know more about "Volume" refer here:

https://brainly.com/question/29255732#

#SPJ11

The curve starts at the origin, moves upwards and to the right, reaches a peak at (1,1), and then moves downwards and to the left before returning to the origin.

The parametric equations given are x = sin(t) and y = 1 - cos(t), where t represents the parameter.

To plot points on this curve, we can start by choosing different values of t and substituting them into the equations to find the corresponding (x,y) pairs. For example, if we set t = 0, we get x = sin(0) = 0 and y = 1 - cos(0) = 0. So the first point on the curve is (0,0).

Similarly, if we set t = pi/2, we get x = sin(pi/2) = 1 and y = 1 - cos(pi/2) = 1. So the second point on the curve is (1,1).

Finally, if we set t = pi, we get x = sin(pi) = 0 and y = 1 - cos(pi) = 2. So the third point on the curve is (0,2).

To indicate the direction in which the curve is traced as t increases, we can look at the values of x and y for increasing values of t. As t increases from 0 to pi/2, x increases from 0 to 1 and y increases from 0 to 1. This means that the curve is traced in the direction of the positive x-axis and the positive y-axis.

As t increases from pi/2 to pi, x decreases from 1 to 0 and y increases from 1 to 2. This means that the curve is traced in the direction of the negative x-axis and the positive y-axis.

Know more about parametric equations here:

https://brainly.com/question/28537985

#SPJ11

The probability that the passenger waits less than 5 minutes for a bus is approximately 0.45.

The probability that a passenger arriving at a specified stop between 7:00 AM and 7:30 AM waits less than 5 minutes for a bus can be calculated as follows:

There are 31 buses that arrive at the stop between 7:00 AM and 7:30 AM, since they arrive at 15-minute intervals. If a passenger arrives at a random time within this 30-minute period, then there is a uniform distribution of possible arrival times.

If we assume that the passenger's arrival time is uniformly distributed over this period, then the probability that the passenger waits less than 5 minutes for a bus is equal to the proportion of the 30-minute interval during which a bus arrives within 5 minutes of the passenger's arrival time.

Since each bus arrives at 15-minute intervals, the probability that a bus arrives within 5 minutes of the passenger's arrival time is the same for each of the 31 buses.

Therefore, the probability that the passenger waits less than 5 minutes for a bus is equal to the proportion of the 30-minute interval that is covered by the 31 buses arriving within 5 minutes of the passenger's arrival time.

To calculate this probability, we can consider the total time covered by the 31 buses that arrive within the 30-minute interval, and then subtract the time during which these buses arrive more than 5 minutes before or after the passenger's arrival time.

There are 2 buses that arrive before the passenger's arrival time, and 2 buses that arrive more than 5 minutes after the passenger's arrival time, so we need to subtract the time covered by these 4 buses.

The time covered by the 31 buses that arrive within the 30-minute interval is 31 × 15 = 465 minutes. The time covered by the 4 buses that arrive before or after the passenger's arrival time is 4 × 15 = 60 minutes. Therefore, the time covered by the 31 buses that arrive within 5 minutes of the passenger's arrival time is 465 - 60 = 405 minutes.

The probability that a bus arrives within 5 minutes of the passenger's arrival time is therefore 405/30 = 13.5/1 or approximately 0.45.

To know more about probability, refer here:

https://brainly.com/question/30034780#

#SPJ11

You can use a random number generator to set a new y-value for Pac-man, causing him to reappear at a different vertical position when he goes off the screen.

To fix Pac-man to use random y-values each time he goes off screen, you would need to modify the code for his movement. Specifically, you would need to add a conditional statement that checks if Pac-man has gone off the screen, and if so, generates a random y-value for him to move to. This conditional statement should be placed within the function or method that controls Pac-man's movement. By doing this, Pac-man will use a random y-value each time he goes off the screen, creating a more unpredictable and exciting gameplay experience. To fix the Pac-man to use random y-values each time he goes off the screen, you would modify the game code in the section responsible for handling the Pac-man's position when it reaches the screen's edge.

Learn more about generator here

https://brainly.com/question/12475693

#SPJ11

The probability of them having a color-blind child is 50%.

Color blindness is a sex-linked genetic disorder that is passed down from parents to their children. The gene for color blindness is located on the X chromosome, which means that males are more likely to be affected than females, as they only have one X chromosome.

If a normal-sighted woman whose father was color-blind marries a color-blind man, we can assume that the woman is a carrier of the color-blindness gene on one of her X chromosomes, but does not express the trait herself. The man, being color-blind, has the color-blindness gene on his only X chromosome.

In this scenario, the probability of them having a color-blind son is 50%, as the son will inherit the color-blindness gene from his mother and the affected X chromosome from his father. The probability of them having a color-blind daughter is also 50%, as the daughter will inherit the color-blindness gene from her mother and the affected X chromosome from her father. However, the daughter will be a carrier like her mother and will not express the trait.

for such more question on probability

https://brainly.com/question/13604758

#SPJ11

a) The equation that models the pieces of chicken Walter ordered is 1.75x + 5 = $15.5.

b) Solving the equation, Walter order 6 pieces of chicken and drinks that cost him $15.50.

An equation is a mathematical statement showing the equality or equivalence of two or more mathematical expressions.

Mathematical expressions combine variables with constants, numbers, and values without the equal symbol (+), unlike equations.

The selling price of chicken per unit = $1.75

The cost of unlimited drinks = $5.00

The total cost of Walter's order = $15.50

Let the number of chickens ordered = x

1.75x + 5 = $15.5

1.75x = 10.5

x = 6

Learn more about equations at https://brainly.com/question/22688504.

#SPJ1

The sum of the first 2021 positive even integers is (2021 x 2022). Therefore, Ray's sum exceeds Pat's sum by 2052.

The sum of the first 2021 positive even integers is given by 2+4+6+...+4040. To find this sum, we can use the formula for the sum of an arithmetic series:

S = (n/2)(a + l)

where S is the sum of the series, n is the number of terms, a is the first term, and l is the last term. In this case, n = 2021, a = 2, and l = 4040 (which is the 2021st even integer). So we have:

S = (2021/2)(2 + 4040)

= 2041210

Therefore, Pat's sum is 2041210.

The sum of the first 2022 positive even integers is given by 2+4+6+...+4042. Using the same formula as above, we have:

S = (2022/2)(2 + 4042)

= 2043262

Therefore, Ray's sum is 2043262.

To find by how much Ray's sum exceeds Pat's sum, we can subtract Pat's sum from Ray's sum:

2043262 - 2041210 = 2052

for such more question on integers

https://brainly.com/question/22008756

#SPJ11

The data collected from customers in restaurants about the quality of food is an example of a customer feedback data.

It is important for restaurants to collect and analyze this data to improve their food quality and overall customer experience.

However, the quality of the data collected is also crucial as inaccurate or biased data can lead to ineffective decision-making.

Therefore, it is important for restaurants to ensure the quality of the data collected by using reliable methods for collecting and analyzing data, and by verifying the accuracy and consistency of the data before using it for decision-making.

learn more about data here:brainly.com/question/10980404

#SPJ11

All of the statements are valid in terms of syntax, but their logic may or may not be correct depending on the context in which they are used.

Let's break down each statement:

double v; v = 1.0f; - This declares a variable v of type double and assigns it the value of 1.0f, which is a single-precision floating-point literal. Since v is a double, this literal is implicitly converted to a double.

float y; y = 54.9; - This declares a variable y of type float and assigns it the value of 54.9, which is a double-precision floating-point literal. Since y is a float, this literal is implicitly converted to a float.

float y; double z; z = 934.21; y = z; - This declares two variables, y of type float and z of type double. It assigns z the value of 934.21, which is a double-precision floating-point literal. It then assigns y the value of z, which is allowed because a double can be safely cast to a float.

float w; w = 1.0f; - This declares a variable w of type float and assigns it the value of 1.0f, which is a single-precision floating-point literal.

So, all the statements are valid in terms of syntax, but their logical correctness depends on the context in which they are used.

for such more question on  syntax

https://brainly.com/question/21926388

#SPJ11

The angle that a side of 15 inches makes with the 6-inch side is approximately 78.46 degrees.

c²= a² + b² - 2ab cos(C)

In this case, we know that the lengths of the two congruent sides are both 15 inches, and the length of the remaining side is 6 inches. So we have:

15² = 6² + 15² - 2(6)(15)cos(x)

225 = 261 - 180cos(x)

180cos(x) = 36

cos(x) =[tex]\frac{36}{180}[/tex]

cos(x) = 0.2

Now we can use the inverse cosine function ([tex]cos^{-1}[/tex]) to find the value of "x" in degrees:

x = [tex]cos^{-1}[/tex](0.2)

x ≈ 78.46 degrees

An angle is a geometric figure formed by two rays with a common endpoint, called the vertex. The rays are known as the sides of the angle. The measure of an angle is usually expressed in degrees, and it represents the amount of rotation needed to rotate one of the sides of the angle onto the other. A full rotation around a point is 360 degrees, so an angle measuring 180 degrees is called a straight angle.

Angles can be classified according to their measure. An acute angle is an angle measuring less than 90 degrees. A right angle is an angle measuring exactly 90 degrees. An obtuse angle measures more than 90 degrees but less than 180 degrees. A reflex angle measures more than 180 degrees but less than 360 degrees.

To learn more about Angle visit here:

brainly.com/question/30147425

#SPJ4

The probability that at least 8 out of the 10 losses are in excess of 1000 is approximately 0.0039.

Since the amount of each loss follows an exponential distribution with mean 1000, the probability that a single loss exceeds 1000 is given by:

P(X > 1000) = 1 - P(X ≤ 1000) = 1 - F(1000),

where F(x) is the cumulative distribution function of the exponential distribution with mean 1000, given by:

[tex]F(x) = 1 - e^{(-x/1000).[/tex]

Thus, we have:

[tex]P(X > 1000) = 1 - F(1000) = 1 - (1 - e^{(-1000/1000)}) = e^{(-1).[/tex]

Now, let Y be the number of losses out of the 10 that exceed 1000. Since the losses are independent, Y follows a binomial distribution with parameters n = 10 and p = e^(-1). Thus, the probability that at least 8 out of the 10 losses are in excess of 1000 is given by:

[tex]P(Y \geq 8) = 1 - P(Y \leq 7) = 1 - \sum(k=0)^7 (10 choose k) \times p^k \times (1-p)^{(10-k),[/tex]

where (10 choose k) is the binomial coefficient. Using a calculator or computer software, we can evaluate this expression to obtain:

P(Y ≥ 8) ≈ 0.0039

for such more question on probability

https://brainly.com/question/13604758

#SPJ11

Luisa covered a distance of 4/45 kilometers in one minute.

We have,

Distance = Speed × Time

Let's let the distance Luisa covered be represented by d, and the speed she traveled be represented by s.

We know that she covered 4/5 of the distance at a constant speed.

d = 4/5

We also know that it took her 9 minutes to cover this distance.

Time = 9 minutes

We can rearrange the formula to solve for the speed:

speed = distance/time

Substituting the values we know:

speed = (4/5) / 9

Simplifying:

speed = 4/45 km/min

Therefore,

Luisa covered a distance of 4/45 kilometers in one minute.

Learn more about speed here:

https://brainly.com/question/7359669

#SPJ1

The complete question:

Luisa covered a distance of 4/5 at a constant speed in 9 minutes, what fraction of km did Luisa cover in one minute?

The probability that it takes at most 1 hour of machining time to produce a randomly selected component is approximately 0.00003 or 0.003%.

To solve this problem, we need to first calculate the total mean and standard deviation for the machining time of a single component.

The total mean machining time can be found by adding the means for each component:

30 + 20 + 15 = 65 minutes

The total standard deviation can be found using the formula:

[tex]\sqrt{((1^2 + 2^2 + 1.2^2)/3)} = 1.247 minutes[/tex]

Now we need to find the probability that it takes at most 1 hour (60 minutes) to produce a randomly selected component. We can use the standard normal distribution to calculate this probability.

z-score = (60 - 65) / 1.247 = -4.01

Using a standard normal distribution table, we can find that the probability of a z-score being less than or equal to -4.01 is approximately 0.00003.

for such more question on probability

https://brainly.com/question/13604758

#SPJ11

The axis of symmetry of the quadratic function for this problem is given as follows:

x = -1.

Considering a quadratic function with equation y = ax² + bc + c, the line of symmetry is defined as follows:

L: x = -b/2a.

The line of symmetry is the x-coordinate of the vertex of the function (turning point on the graph).

The coordinates of the vertex are given as follows:

(-1, -1).

Hence the line of symmetry is given as follows:

x = -1.

The problem asks for the axis of symmetry of the quadratic function.

More can be learned about quadratic functions at https://brainly.com/question/1214333

#SPJ1

The true statements are:

Thus, the correct option is B.

Here the exponential equation is:

2^x = 8

To solve this, we can apply the logarithm function in both sides, then we will get:

log(2^x) = log(8)

x*log(2) = log(8)

x = log(8)/log(2) =3

Also remember the rule:

log(x)/log(n) = logₙ(x)

Then:

x = log₂(8).

Then the true statements are:

x = log(8)/log(2)

x = log₂(8).

x =3

So the correct statements are:

II, III, and IV

The correct option is B.

Learn more about logarithms at:

https://brainly.com/question/13473114

#SPJ1

Larger sample sizes provide more accurate estimates of the population mean, even if the population is not normally distributed.

For a population that is not normally distributed, the distribution of the sample means will approach a normal distribution as the size of the sample increases.

This is known as the Central Limit Theorem, which states that as the sample size increases, the distribution of sample means becomes more normal regardless of the shape of the population distribution.

Therefore, larger sample sizes provide more accurate estimates of the population mean, even if the population is not normally distributed.

to learn more about sample sizes click here:

brainly.com/question/30526686

#SPJ11

The equation x^2 + y^2 + 12x + 4y + 15 = 0 represents a circle with center (-6, -2) and radius 5.

To find the center and radius of the circle represented by the equation x^2 + y^2 + 12x + 4y + 15 = 0, we need to complete the square for both x and y terms. First, we will focus on the x terms:

x^2 + 12x = (x + 6)^2 - 36

Next, we will focus on the y terms:

y^2 + 4y = (y + 2)^2 - 4

Substituting these into the original equation, we get:

(x + 6)^2 - 36 + (y + 2)^2 - 4 + 15 = 0

Simplifying, we get:

(x + 6)^2 + (y + 2)^2 = 25

Comparing this to the standard form of the equation of a circle, (x - h)^2 + (y - k)^2 = r^2, we can see that the center of the circle is (-6, -2) and the radius is √25 = 5..

For such more questions on Circle:

https://brainly.com/question/28162977

#SPJ11

There are 3,628,800 ways to seat the four women and six men in a row of ten chairs when there are no restrictions.

If there are no restrictions on the seating arrangement of the four women and six men, then the number of ways to seat them in a row of ten chairs can be calculated as follows:

First, we have 10 choices for the person who will sit in the first chair. After this, we have 9 choices for the person who will sit in the second chair, as one person has already been seated.

We continue in this way until we have only one choice left for the person who will sit in the tenth chair. Therefore, the total number of ways to seat the ten people in a row is:

10 x 9 x 8 x 7 x 6 x 5 x 4 x 3 x 2 x 1 = 3,628,800

So there are 3,628,800 ways to seat the four women and six men in a row of ten chairs when there are no restrictions.

for such more question on total number

https://brainly.com/question/25109150

#SPJ11

Answer:

a) 4/11

b) 11/30

c) 9/25

Step-by-step explanation:

As it says we can't use a calculator we can just type them into a calculator and simplify the fraction. If you need to know how to do it without a calculator then post a comment.

Probability that Jeff's sum is an odd number is 1/4.

To find the probability that Jeff's sum is an odd number, we need to consider the possible outcomes of his spinners. Each spinner has an equal probability of landing on any number from 1 to 6, and there are 3 spinners in total.
To get an odd number sum, Jeff must have an odd number from at least one of his spinners. There are two ways this can happen:
1. Jeff gets an odd number from just one spinner. There are 3 spinners to choose from, and each spinner has 3 odd numbers and 3 even numbers. So the probability of Jeff getting an odd number from just one spinner is:
(3/6) x (3/6) x (3/6) = 27/216
2. Jeff gets odd numbers from two spinners. There are 3 ways this can happen:
- Spinner P and Q are odd, and Spinner R is even
- Spinner P and R are odd, and Spinner Q is even
- Spinner Q and R are odd, and Spinner P is even
For each of these scenarios, the probability is:
(3/6) x (3/6) x (3/6) = 27/216
So the total probability of Jeff getting an odd number sum is the sum of the probabilities from both scenarios:
27/216 + 27/216 = 54/216 = 1/4
Therefore, the probability that Jeff's sum is an odd number is 1/4.

Learn more about probability at: https://brainly.com/question/31722868

#SPJ11

By using the graph above, all of the statements that are true include the following:

B. f(1.4) = 1

C. f(0) = 0

D. this is the graph of the greatest integer function.

In Mathematics and Geometry, a greatest integer function can be defined as a type of function which returns the greatest integer that is less than or equal (≤) to the number.

Mathematically, the greatest integer that is less than or equal (≤) to a number (x) is represented as follows:

y = [x].

By critically observing the given graph, we can logically deduce that it does not represent a one-to-one function because the input value are over many intervals.

Read more on greatest integer function here: brainly.com/question/12165085

#SPJ1

Since the limit of a_n is not zero, the Alternating Series Test is inconclusive. However, it's clear that the series does not converge to a single value due to the oscillating behavior of the (-1)^n term.

Thus, the given series diverges.

To test the convergence or divergence of the given series, we can use the Alternating Series Test. The series is in the form (-1)^n * a_n, where a_n = (7n - 3) / (4n + 3).

First, we need to check if a_n is positive and decreasing. For all n >= 1, a_n is positive as the denominator (4n + 3) is always larger than the numerator (7n - 3). Now let's check if a_n is decreasing:

a_(n+1) = (7(n+1) - 3) / (4(n+1) + 3)
a_(n+1) = (7n + 4) / (4n + 7)

Since both the numerator and the denominator increase with n, a_(n+1) < a_n for all n >= 1. Therefore, a_n is decreasing.

Now, we need to find the limit of a_n as n approaches infinity:

lim (n → infinity) (7n - 3) / (4n + 3)

To find this limit, we can divide the numerator and the denominator by n:

lim (n → infinity) [(7 - 3/n) / (4 + 3/n)]

As n approaches infinity, the terms with 1/n approach zero:

lim (n → infinity) [7 / 4] = 7/4

To learn more about alternating series test :brainly.com/question/16969349

#SPJ11

Thus, the annual arithmetic mean number of degrees awarded in computer science over the most recent seven years is approximately 7,525.14.

To find the annual arithmetic mean number of degrees awarded in computer science over the most recent seven years, we need to add up the total number of degrees awarded over those years and then divide that total by seven (the number of years being considered).

So, adding up the numbers given in the question, we get:

4,820 + 13,188 + 4,614 + 5,920 + 12,372 + 5,885 + 5,877 = 52,676

Now, to find the mean, we divide this total by seven:

52,676 ÷ 7 = 7,525.14

So, the annual arithmetic mean number of degrees awarded in computer science over the most recent seven years is approximately 7,525.14.

If we wanted to understand more about how the number of degrees awarded in computer science has changed over time, we would need to look at additional data and analyze it in more detail.

Know more about the arithmetic mean

https://brainly.com/question/26088030

#SPJ11

Answer:

4 1/4

Step-by-step explanation:

Adding fractions is like making a pizza. You need to have the same size slices, which are the denominators. The fractions in this problem have different size slices: 4 and 2. To make them the same, you can multiply the slices together: 4 x 2 = 8. Then, you need to multiply the cheese (the numerator) by the same factor that you multiplied the slices by. For example, to convert 1/4 to 8ths, you multiply both the cheese and slices by 2: 1 x 2 = 2 and 4 x 2 = 8. So, 1/4 is the same as 2/8. Similarly, to convert 2/2 to 8ths, you multiply both the cheese and slices by 4: 2 x 4 = 8 and 2 x 4 = 8. So, 2/2 is the same as 8/8.

Now that you have pizzas with the same size slices, you can add them by adding the cheese and keeping the slices the same. For example, to add 2/8 and 8/8, you add the cheese: 2 + 8 = 10 and keep the slices: 8. So, 2/8 + 8/8 = 10/8.

Using this method, you can add the pizzas in this problem:

1 3/4 + 2 1/2

First, convert both pizzas to have slices of size 8:

1 3/4 = (1 x 8 + 3 x 2) / (4 x 2) = (8 + 6) / (8) = 14/8

2 1/2 = (2 x 8 + 1 x 4) / (2 x 4) = (16 + 4) / (8) = 20/8

Then, add the pizzas:

14/8 + 20/8 = (14 + 20) / (8) = 34/8

Finally, simplify the pizza by dividing both the cheese and slices by their greatest common factor, which is 2:

34/8 = (34 / 2) / (8 / 2) = (17 / (4)

So, the answer is:

1 3/4 + 2 1/2 = (17 / (4)

This means that you ate a total of (17 / (4) pizzas to get full. The correct option is 4 1/4.

the length of the arc of the curve f(x) = 4x^2 + 5 on [2, 5) is approximately 24.79 units.

the surface area generated by revolving about the z-axis the curve f(x) = 2x^3 + 20/x on [1, 6] is approximately 1220.37 square units.

the volume of the solid formed by revolving D about the x-axis is approximately 5.58 cubic units.

the volume of the solid formed by revolving D about the y-axis is approximately 13.89 cubic units.

To find the length of the arc of the curve f(x) = 4x^2 + 5 on [2, 5), we need to use the formula for arc length:

L = ∫[a,b] sqrt(1 + [f'(x)]^2) dx

Taking the derivative of f(x), we get:

f'(x) = 8x

Plugging in f'(x) into the formula for arc length, we get:

L = ∫[2,5) sqrt(1 + (8x)^2) dx

Using a substitution of u = 1 + (8x)^2, we get:

du/dx = 16x

dx = du/16x

Substituting these into the integral, we get:

L = ∫[321, 1601) sqrt(u)/16x du

L = (1/128) ∫[321, 1601) u^(-1/2) du

L = (1/64) [u^(1/2)] [321, 1601)

L ≈ 24.79

Therefore, the length of the arc of the curve f(x) = 4x^2 + 5 on [2, 5) is approximately 24.79 units.

---

To find the surface area generated by revolving about the z-axis the curve f(x) = 2x^3 + 20/x on [1, 6], we need to use the formula for surface area of revolution:

A = ∫[a,b] 2πf(x) sqrt(1 + [f'(x)]^2) dx

Taking the derivative of f(x), we get:

f'(x) = 6x^2 - 20/x^2

Plugging in f(x) and f'(x) into the formula for surface area, we get:

A = ∫[1,6] 2π[2x^3 + 20/x] sqrt(1 + (6x^2 - 20/x^2)^2) dx

Using a substitution of u = 6x^2 - 20/x^2 + 1, we get:

du/dx = 12x + 40/x^3

dx = du/(12x + 40/x^3)

Substituting these into the integral, we get:

A = 2π ∫[7,217] (u-1)^(1/2)/6 du

Using a substitution of v = u - 1 and multiplying by 2π/6, we get:

A = π/3 ∫[6,216] v^(1/2) dv

A = π/3 [v^(3/2)/ (3/2)] [6,216]

A ≈ 1220.37

Therefore, the surface area generated by revolving about the z-axis the curve f(x) = 2x^3 + 20/x on [1, 6] is approximately 1220.37 square units.

---

To find the volume of the solid formed by revolving D about the x-axis, we need to use the formula for volume of solid of revolution:

V = ∫[a,b] π[f(x)]^2 dx

We can see that the region D is formed by the intersection of y

= 5x and y = x, so the bounds of integration are from x = 0 to x = 1.

Plugging in f(x) = (5x - x)^2 = 16x^2 into the formula, we get:

V = ∫[0,1] π(16x^2) dx

V = (16π/3) ∫[0,1] x^2 dx

V = (16π/3) [x^(3)/3] [0,1]

V = (16π/9)

Therefore, the volume of the solid formed by revolving D about the x-axis is approximately 5.58 cubic units.

---

To find the volume of the solid formed by revolving D about the y-axis, we need to use the formula for volume of solid of revolution:

V = ∫[a,b] π[f(x)]^2 dy

Since we have y = 5x and y = x, we can solve for x in terms of y to get the bounds of integration:

x = y/5 and x = y

So the bounds of integration are from y = 0 to y = 5.

Plugging in f(y) = (5y/4)^2 - (y/4)^2 = 24y^2/16 into the formula, we get:

V = ∫[0,5] π(24y^2/16)^2 dy

V = π(36/256) ∫[0,5] y^4 dy

V = (9π/64) [(y^5)/5] [0,5]

V = (1125π/256)

Therefore, the volume of the solid formed by revolving D about the y-axis is approximately 13.89 cubic units.

Visit to know more about Volume:-

brainly.com/question/463363

#SPJ11