According to the meteorological report for 300 consecutive days in a year, its weather forecast was correct 180 times. Out of these days, one day was chosen at random, what is the probability that the weather forecast was correct on that day and not correct on that day.

The tire will make 452.52 rotations if it travels a linear distance of 1 mile.

To calculate the linear distance (m) the tire travels, we need to find the circumference of the tire first.
Circumference = π x Diameter
Circumference = 3.14 x 28.6 in
Circumference = 89.884 in
Now, we can find the linear distance (m) the tire travels by multiplying the circumference by the number of rotations.
Linear distance = Circumference x Rotations
Linear distance = 89.884 in x 6.5
Linear distance = 583.66 in
To convert this to meters, we need to divide by 39.37 (since there are 39.37 inches in a meter).
Linear distance = 583.66 in ÷ 39.37
Linear distance = 14.83 m.
To find out how many rotations the tire will make if it travels a linear distance of 1 mile (which is 1609.34 meters), we can use the formula:
Rotations = Linear distance ÷ Circumference.
Rotations = 1609.34 m ÷ 89.884 in
Rotations = 452.52 rotations.

For similar question on distance.

https://brainly.com/question/2854969

#SPJ11

We can write -

We can write the total area of both semicircles as -

A = 2π(12/2)²

A = 12π

We can write the total area of the rectangle as -

A = 12 x 4

A = 48

We can write the total area of the figure as -

A{total} = 12π + 48

A{total} = 12(π + 4)

To solve more questions on areas & perimeter, visit the link-

brainly.com/question/29213222

#SPJ1

a) The original statement can be expressed as: For all x and y, if N(x) and N(y), then P(x,y)

b) The original statement can be expressed as: For all x, if R(x), then D(x)

c) For all x, if P(x), then there exist y and z such that S(x,y) and S(x,z) and y is not equal to z.

d) The original statement can be expressed as: For all x, if N(x) and R(y), then not S(x,y).

a) The product of two negative real numbers is positive:

Let P(x,y) be the statement "the product of x and y is positive", N(x) be the statement "x is a negative real number". Then the original statement can be expressed as:

For all x and y, if N(x) and N(y), then P(x,y)

b) The difference of a real number and itself is zero:

Let D(x) be the statement "the difference of x and itself is zero", R(x) be the statement "x is a real number". Then the original statement can be expressed as: For all x, if R(x), then D(x)

c) Every positive real number has exactly two square roots:

Let S(x,y) be the statement "y is a square root of x", P(x) be the statement "x is a positive real number". Then the original statement can be expressed as:

For all x, if P(x), then there exist y and z such that S(x,y) and S(x,z) and y is not equal to z.

d) A negative real number does not have a square root that is a real number:

Let R(x) be the statement "x is a real number", N(x) be the statement "x is a negative real number", S(x,y) be the statement "y is a square root of x". Then the original statement can be expressed as:

For all x, if N(x) and R(y), then not S(x,y).

for such more question on  real number

https://brainly.com/question/27847549

#SPJ11

The estimated coefficient for Fitness Center in a regression analysis represents the expected change in the dependent variable associated with a unit increase in the independent variable.

It tells us how much having a Fitness Center affects the rent price. To determine how much the rent price for a 1-bedroom apartment would be if the complex has a Fitness Center, Parking Space, and Wireless Internet, we would need to know the specific coefficients for each of these independent variables in the regression analysis, as well as the constant term. We could then plug in the values for each variable and calculate the predicted rent price. It is important to note that the estimated coefficient for Fitness Center does not necessarily imply causation. Other factors could be influencing both the presence of a Fitness Center and the rent price, and a regression analysis only captures the relationship between the variables that are included in the model. Additionally, the size and direction of the coefficient can vary depending on the data and methodology used in the analysis.

Learn more about dependent variable here

https://brainly.com/question/30130695

#SPJ11

The sample size is 100 and the standard deviation is 14. Therefore, the SEM is 14/√100 = 1.4. Therefore, the correct answer is c.

The standard error of the mean (SEM) is a measure of how accurately the sample mean represents the population mean. It is calculated as the standard deviation divided by the square root of the sample size. In this case,  It is important to note that the SEM decreases as the sample size increases, which means that larger samples provide more accurate estimates of the population mean.

Additionally, the SEM can be used to calculate confidence intervals and perform hypothesis testing for the population mean.

To learn more about standard deviations click here

brainly.com/question/23907081

#SPJ11

This NPDA works by pushing all the a's onto the stack and then popping them off as b's are read. If there are ever more b's than a's on the stack, the NPDA enters a non-accepting state. If the input string is read completely and the stack is empty, the NPDA enters an accepting state.

To define a NPDA for the language L = {anbm | m,n ∈ N, n ≥ 3, m > n}, we can use the following construction:

1. The NPDA has a single initial state, q0, with an empty stack.
2. For each symbol a in the input alphabet, the NPDA has a transition from q0 to q0 that reads a and pushes it onto the stack.
3. For each symbol b in the input alphabet, the NPDA has a transition from q0 to q1 that reads b and pops a single symbol from the stack.
4. The NPDA has a series of transitions from q1 back to q1 that read b and pop a single symbol from the stack for each b in the input string, until the stack is empty.
5. The NPDA has a final state, q2, that is reached only when the input string has been completely read and the stack is empty.

Know more about NPDA here:

https://brainly.com/question/31382473

#SPJ11

There are several possible reasons why per capita per day water consumption could be higher than the wastewater generated:

Non-domestic water use: Per capita water usage includes not only water used in households but also water used for commercial, industrial, and agricultural purposes. Wastewater, on the other hand, only includes water that has been used in households and is discharged into the sewer system. Therefore, if there is significant non-domestic water use in the area, per capita water usage could be higher than wastewater generated.

Inefficient water use: Even though per capita water usage is high, some of the water used may not end up in the wastewater stream. For example, water may be used for landscaping or irrigation, and much of it could evaporate or soak into the ground before it reaches the sewer system. This would result in higher water usage than wastewater generated.

Water loss: The water distribution system may experience leaks or other losses, resulting in some of the water being lost before it reaches households or other water users. This would result in higher water usage than wastewater generated.

Infiltration and inflow: In some cases, rainwater or groundwater can infiltrate into the sewer system or inflow into wastewater treatment plants, increasing the volume of wastewater generated. This could result in lower wastewater generated than per capita water usage.

Time lag: There may be a time lag between water usage and wastewater generated, especially in areas with septic systems. It is possible that some of the water used today may not be discharged into the sewer system for several days or even weeks, resulting in higher per capita water usage than wastewater generated on any given day.

To learn more about wastewater here

https://brainly.com/question/30939874

#SPJ4

This format had 144 possible telephone area codes in the United States and Canada.

We can calculate the number of possible area codes based on the given information by multiplying the number of options for each digit.

There are 8 options for the first digit (2 through 9), 2 options for the second digit (0 or 1), and 9 options for the third digit (1 through 9).

So, the total number of possible area codes is:

8 x 2 x 9 = 144

Know more about integer here:

https://brainly.com/question/15276410

#SPJ11

The probability of drawing a 7 followed by a 10 is (4/52) x (4/51) = 0.006 or 0.6%.

To calculate the probability of drawing a 7 first and then a 10 from a standard 52-card deck, you need to consider the number of 7s and 10s in the deck and the total number of cards.

There are 4 sevens and 4 tens in the deck. The probability of drawing a 7 first is 4/52 (since there are 4 sevens and 52 cards in total). After drawing a 7, there are now 51 cards left in the deck. The probability of drawing a 10 next is 4/51 (since there are still 4 tens but now only 51 cards).

To find the overall probability, multiply the probabilities of each event: (4/52) * (4/51) = 16/2652 ≈ 0.006 or 0.6%.

More on probability: https://brainly.com/question/29561031

#SPJ11

Thus, we need a sample size of at least 22 to obtain a 90 percent confidence interval for the mean protein content of meat with an estimate within 2 pounds of the true mean value.

To obtain a 90 percent confidence interval for the mean protein content of meat with an estimate within 2 pounds of the true mean value, we need to calculate the required sample size. The formula for the required sample size is:

n = (Zα/2 * σ / E)^2

where n is the required sample size, Zα/2 is the z-score for the desired confidence level (in this case 90%), σ is the standard deviation of the population (in this case 7 pounds, the square root of the variance), and E is the margin of error (in this case 2 pounds).

Plugging in the values, we get:

n = (1.645 * 7 / 2)^2
n = 21.16

Therefore, we need a sample size of at least 22 to obtain a 90 percent confidence interval for the mean protein content of meat with an estimate within 2 pounds of the true mean value. It is important to note that this assumes that the sample is drawn randomly and is representative of the population.

Know more about the confidence interval

https://brainly.com/question/20309162

#SPJ11

The diameter of the circle is 40/3 units.

We have,

Let's first recall the formulas for the area of a sector and the length of an arc of a circle:

Area of a sector with central angle θ and radius r: A = (θ/360)πr²

Length of an arc with central angle θ and radius r: L = (θ/360)2πr

We are given that the area of the sector is 5π and the arc measure is 50 degrees.

Let's denote the radius of the circle by r and the central angle of the sector by θ.

We can set up a system of equations using the formulas above:

(θ/360)πr² = 5π (since the area of the sector is 5π)

(θ/360)2πr = L (since the length of the arc is given as 50 degrees)

Simplifying these equations.

(θ/360)r² = 5 (canceling out π on both sides)

(θ/180)r = L/π

Solving for θ in the second equation.

θ = (180/π)(L/r)

Substituting this into the first equation and solving for r.

((180/π)(L/r))/360 r² = 5

(L/r) r = (5π/9)

r = (5π/9) / (L/r)

r = (5πr)/(9L)

Now we can substitute the given values for L and θ into the above expression for r:

L = (50/360)(2πr) = (5/36)πr

θ = 50 degrees = (50/180)π radians

Substituting these into the expression for r.

r = (5πr)/(9L) = (5πr)/(9*(5/36)πr) = (20/3)

Now,

The diameter of the circle is twice the radius.

2r = 2*(20/3) = 40/3

Thus,

The diameter of the circle is 40/3 units.

Learn more about Circle here:

https://brainly.com/question/11833983

#SPJ1

The degrees of freedom of a model refer to the number of independent pieces of information that are available to estimate the model parameters.

In other words, it represents the number of observations that are free to vary in the analysis. To view the degrees of freedom of the model, we can use the Coordinates panel in the statistical software. The total number of degrees of freedom in a model depends on the number of variables and observations in the data set.

For example, if we have a data set with 100 observations and 5 variables, including an intercept, the total number of degrees of freedom in the model would be 94. This is because the intercept uses one degree of freedom, and each additional variable uses one degree of freedom.

Therefore, the total number of degrees of freedom is equal to the number of observations minus the number of variables used in the model. The Coordinates panel provides a convenient way to view this information and can help us better understand the statistical properties of our model.

To learn more about Coordinates click here

brainly.com/question/16634867

#SPJ11

The Bonferroni method is a statistical correction technique used to adjust the significance level (alpha) when multiple hypothesis tests are conducted simultaneously.

This method helps control the family-wise error rate, which is the probability of making at least one type I error (false positive) across multiple tests.

In your case, the given p-value is 0.007726%. To adjust this p-value using the Bonferroni method, you first need to know the total number of tests conducted (let's call it 'n'). The adjusted significance level (alpha) would be calculated by dividing the original alpha level (usually 0.05 or 5%) by the number of tests (n). Then, you can compare the adjusted alpha with the p-value to determine if the result is statistically significant.

For example, if you conducted 10 tests, the adjusted alpha would be 0.05 / 10 = 0.005 or 0.5%.

In this case, since the given p-value of 0.007726% (0.00007726) is greater than the adjusted alpha (0.005), you would fail to reject the null hypothesis, suggesting that the result is not statistically significant after adjusting for multiple comparisons using the Bonferroni method.

To learn more about significance level click here

brainly.com/question/13947717

#SPJ11

The solution is: Garret placed the treasure at the right place.

Here, we have,

The Cartesian plane can be used to locate the position of any given point with a coordinate. It consists of two numbered lines perpendicular to each other and intersecting at point zero of the lines.

From the statements given, 5 units from x-axis is not the same as 5 units on x-axis. Also, 3 units from y-axis is not the same as 3 units on y-axis.

So, distance 5 units from x-axis implies that a point 5 units after the x-axis. And also, distance 3 units from y-axis means 3 units after the y-axis.

With these conditions of the coordinate of the treasure, Garrett placed the treasure at the right place.

Hence, The solution is: Garret placed the treasure at the right place.

learn more on coordinates:

https://brainly.com/question/21137862

#SPJ1

complete question:

Garrett and Jeffrey are planning a treasure hunt. They decide to place a treasure at a point that is a

distance of 5 units from the x-axis and 3 units from the y-axis. Jeffrey places a treasure at point J, and

Garrett places one at point G. Who put the treasure in the right place? Explain how you know.

To find the variance, we can use the formula: variance = standard deviation squared, Using the given standard deviation of 10.4, we can calculate the variance as: variance = 10.4^2 = 108.16.

However, we are also given the sample standard deviation of 11.6. This suggests that the sample may not accurately represent the population, and we should use the sample standard deviation to estimate the population standard deviation.

To adjust for this, we can use Bessel's correction, which adjusts the sample standard deviation by dividing by (n-1) instead of n: adjusted sample standard deviation = 11.6 * sqrt(5/4) = 14.5, Then, we can use this adjusted standard deviation to estimate the variance: variance = 14.5^2 = 210.25 .

Therefore, the most nearly the variance is 210.25, a sample standard deviation of 11.6 is given, we'll use that value. Variance is the square of the standard deviation. Therefore, the variance is:

Variance = (Sample Standard Deviation)^2
Variance = (11.6)^2
Variance = 134.56, So, the variance is most nearly 134.56.

To know more about estimated click here

brainly.com/question/28338974

#SPJ11

The range of values where the true proportion is likely to be found and determine whether a sample proportion is significantly different from a hypothesized proportion.

To estimate the standard deviation of the sampling distribution of sample proportions, we need to use the formula:
σp = sqrt(p*(1-p)/n)
where σp is the standard deviation of the sampling distribution of sample proportions, p is the proportion of successes in the population, and n is the sample size.
If we don't know the proportion of successes in the population, we can use the sample proportion as an estimate. However, if the sample size is small, we need to use a correction factor called the finite population correction:
σp = sqrt(p*(1-p)/(n-1)) * sqrt((N-n)/(N-1))
where N is the population size.
In general, the standard deviation of the sampling distribution of sample proportions decreases as the sample size increases. This is because larger samples are more representative of the population and have less sampling error.
The standard deviation of the sampling distribution of sample proportions is an important concept in statistics, as it allows us to calculate confidence intervals and perform hypothesis tests on proportions.

Learn more about proportion here

https://brainly.com/question/1496357

#SPJ11

This statement best illustrates money used as a medium of exchange. In this scenario, the individual goes to the store and exchanges $68 for a pair of jeans. Money serves as a medium of exchange when it is used to facilitate transactions between buyers and sellers. In this case, the buyer wants a pair of jeans, and the seller wants to sell them for $68. Without money, they would have to engage in bartering, which can be cumbersome and inefficient. Money makes the transaction smoother and allows both parties to get what they want. Overall, this example demonstrates how money is an essential tool for facilitating transactions in our modern economy.
Hi! Your question is about the function of money as illustrated by the example of paying $68 for a pair of jeans. This statement best illustrates money used as a medium of exchange.

In this scenario, money is being used as a medium of exchange because it is facilitating the transaction between you and the store. Instead of using barter or trading goods and services directly, you use money to acquire the pair of jeans. This makes transactions more efficient and convenient since it eliminates the need for a double coincidence of wants, which is when two parties each have something the other wants. As a medium of exchange, money serves as a universally accepted means to buy and sell goods and services, like your jeans purchase at the store.

To know more about inefficient visit:

https://brainly.com/question/26647325

#SPJ11

they are all multiple in order 2x2=4 4×3=12 12×4=48 48x5=240

At a 0.05 level of significance, there is insufficient evidence to conclude that the mean amount of garbage per bin is different from 50 pounds.

To conduct the appropriate hypothesis test, we need to use a two-tailed t-test since we are interested in determining if the mean amount of garbage per bin is different from 50, not just greater or less than 50.

Our null hypothesis (H0) is that the mean amount of garbage per bin is equal to 50, and our alternative hypothesis (Ha) is that the mean amount of garbage per bin is different from 50.

Using a 0.05 level of significance, we will reject the null hypothesis if our calculated t-value falls outside of the critical t-value range determined by our degrees of freedom (df) and alpha level.

To calculate the t-value, we use the formula:

t = (sample mean - hypothesized mean) / (sample standard deviation / sqrt(sample size))

Plugging in our values, we get:

t = (49.32 - 50) / (3.7 / sqrt(36))
t = -2.08

Using a t-table with df = 35 and alpha = 0.05, we find that the critical t-values are -2.03 and 2.03.

Since our calculated t-value of -2.08 falls outside of this range, we reject the null hypothesis and conclude that there is sufficient evidence to suggest that the mean amount of garbage per bin is different from 50.
To test if the mean amount of garbage per bin is different from 50, we will conduct a two-tailed hypothesis test using the provided information.

Step 1: State the null and alternative hypotheses.
Null hypothesis (H₀): µ = 50 (The population mean is equal to 50 pounds)
Alternative hypothesis (H₁): µ ≠ 50 (The population mean is not equal to 50 pounds)

Step 2: Determine the level of significance (α) and sample size (n).
α = 0.05
n = 36

Step 3: Calculate the test statistic (z-score).
z = (sample mean - population mean) / (sample standard deviation / √n)
z = (49.32 - 50) / (3.7 / √36)
z = -0.68 / 0.6167
z ≈ -1.10

Step 4: Find the critical z-values and make a decision.
For a two-tailed test with α = 0.05, the critical z-values are -1.96 and 1.96. Since the test statistic, -1.10, lies between these critical values, we fail to reject the null hypothesis.

Conclusion: At a 0.05 level of significance, there is insufficient evidence to conclude that the mean amount of garbage per bin is different from 50 pounds.

Learn more about null hypothesis at: brainly.com/question/28920252

#SPJ11

The perimeter of ABCD in inches is 30 in.

Perimeter is the measurement of the total distance around an object.

To calculate the perimeter of ABCD, we use the formula below

Formula:

Where:

To find /BC/ we use Pythagoras theorem

Substitute these values into equation 1

Learn more about perimeter here: https://brainly.com/question/24571594

#SPJ1

The molds filled by the machine will hold weights between 1032.69 and 1123.31 pounds.

To find the interval of weights for 90% of the molds filled by the machine, we need to use the properties of the normal distribution.

Since we know the mean and standard deviation of the weights, we can standardize the distribution using the z-score formula:
z = (x - μ) / σ
Where x is the weight of the concrete poured into the mold, μ is the mean weight, and σ is the standard deviation.
To find the interval of weights that covers 90% of the molds, we need to find the z-scores that correspond to the 5th and 95th percentiles of the standard normal distribution.

These percentiles are represented by the values -1.645 and 1.645, respectively.
So, we can solve for the corresponding weights using the z-score formula:
normal distribution, 90% of the data falls within the range of the mean ± 1.645 standard deviations (this value corresponds to a 90% confidence interval).

Using this information, we can calculate the interval as follows:

Lower bound: µ - 1.645 * σ = 1078 - 1.645 * 23 ≈ 1044.515

Upper bound: µ + 1.645 * σ = 1078 + 1.645 * 23 ≈ 1111.485
-1.645 = (x - 1078) / 23
x = 1032.69
And
1.645 = (x - 1078) / 23
x = 1123.31
Therefore, approximately 90% of the molds filled by the machine will hold weights between 1032.69 and 1123.31 pounds.

For similar question on molds filled:

https://brainly.com/question/16167489

#SPJ11

2a² - 4a + 9

How To Solve!

Answer:

2a² - 4a + 9

Step-by-step explanation:

Combine like terms in equation. SO 3a² and -a², -8a and 4a, 5 and 4.

Now add the like terms together. SO 3a² - a² = 2a² -8a + 4a = -4a 5 + 4 = 9

Now put all three products together to get our answer :

2a² - 4a + 9

Answer:12cm

Step-by-step explanation: volume of a square based pyramid = base area ×height

120 = X × 10

120/10 =

12 = X

base area of square = 4× X

12= 4 × X

12/ 4 =

3= X

So , the length of its base is 3 cm

To find the height of the new rectangular box, we first need to determine the volume of the original can. The can has a height of 6 inches and a diameter of 4 inches, which means it has a radius of 2 inches. The volume of a cylinder (can) is calculated using the formula V = πr²h.

In this case, V = π(2²)(6) = 24π cubic inches.

Now, we need to find the height of the new rectangular box that has a width of 4 inches and a depth of 2 inches. To maintain the same volume, the formula for the volume of a rectangular prism (box) is V = lwh.

Since we know the volume (24π cubic inches), width (4 inches), and depth (2 inches), we can solve for the height (h):

24π = (4)(2)(h)
24π = 8h

Now, divide both sides by 8:

h = 3π inches

So, the height of the new rectangular box would be 3π inches to maintain the same volume as the original can.

To know more about volume visit:

https://brainly.com/question/1578538

#SPJ11

The speed of the current is 10 feet per minute and the equivalent rate at which he can row in still water is 70 feet per minute.

To Analyze the speed of the current and the equivalent rate at which the man can row in still water. Let's denote the speed of the current as C and the man's rowing speed in still water as S. When the man is rowing upstream, his effective speed is S - C, and when he's rowing downstream, his effective speed is S + C. We can use the formula distance = rate × time for both cases.

For upstream (600 feet in 10 minutes):
600 = (S - C) × 10

For downstream (400 feet in 5 minutes):
400 = (S + C) × 5

We can now simplify these equations:

1) 60 = S - C
2) 80 = S + C

Now we can solve these equations simultaneously to find S and C. Adding both equations, we get:

140 = 2S => S = 70

Now, we can substitute the value of S in Equation 1:

60 = 70 - C => C = 10

So, the speed of the current (C) is 10 feet per minute, and the equivalent rate at which the man can row in still water (S) is 70 feet per minute.

Know more about speed here:

https://brainly.com/question/13262646

#SPJ11

The ordered pair solutions for the system of equations are: (-1, 0) and (5, -6).

In order to graph the solution to the given system of equations on a coordinate plane, we would use an online graphing calculator to plot the given system of equations and then take note of the point of intersection;

f(x) = x² - 5x - 6    ......equation 1.

f(x) = -x - 1 ......equation 2.

In this exercise, we would use an online graphing calculator to plot the given system of equations as shown in the graph attached below.

Based on the graph shown in the image attached below, we can logically deduce that the solution to this system of equations is the point of intersection of the lines on the graph representing each of them, which lies in Quadrant II and Quadrant IV, and it is given by the ordered pairs (-1, 0) and (5, -6).

Read more on solution and equation here: brainly.com/question/25858757

#SPJ1

To find the number of radios that had both digital tuners and CD players, we need to use the concept of overlapping sets. We know that there were 210 radios with digital tuners and 270 with CD players, but some of these radios had both features.

To find the number of radios that had both digital tuners and CD players, we need to subtract the number of radios that had only one of these features from the total number of radios.

Let X be the number of radios that had both digital tuners and CD players.

Then, the number of radios that had only digital tuners is 210 - X, and the number of radios that had only CD players is 270 - X.

The total number of radios is given as 300, so we can set up an equation:

X + (210 - X) + (270 - X) = 300

Simplifying this equation, we get:

X = 180

Therefore, there were 180 clock radios with both digital tuners and CD players.

Learn more about overlapping sets here: brainly.com/question/30113210

#SPJ11

Let's start by defining some variables: Let x be the airspeed of the first plane in kilometers per hour.
Then the airspeed of the second plane is x+80 km/h.

Let t be the time in hours that the first plane flies before the second plane starts.
After two hours, the first plane has flown for t+2 hours, and the second plane has flown for t hours. To solve for the airspeeds, we need to use the formula: distance = rate x time.

The distance the planes fly in opposite directions is the sum of the distances each plane flies:
distance = (x)(t+2) + (x+80)(t), We are told that after two hours, the planes are 3165 kilometers apart, so we can set up an equation: 3165 = (x)(t+2) + (x+80)(t).

Simplifying this equation:
3165 = xt + 2x + xt + 80t + 80
3165 = 2xt + 82t + 2x + 80
3165 = 2t(x+40) + 2x + 80
3085 = 2t(x+40) + 2x

Now we can solve for x:
3085 = 2t(x+40) + 2x
3085 = 2tx + 80t + 2x
3085 = 4tx + 80t
38.5625 = tx + 20t
1.928125 = x + 20

So the airspeed of the first plane is x = 1.928125 - 20 = 18.071875 km/h.
The airspeed of the second plane is x+80 = 18.071875 + 80 = 98.071875 km/h. Let's denote the airspeed of the first plane as x km/h and the airspeed of the second plane as (x + 80) km/h.


Since the planes fly in opposite directions, the sum of the distances they travel is equal to the distance between them, which is 3165 km. Therefore, we can write the equation: 2x + 1.5(x + 80) = 3165

Now we can find the airspeed of the second plane: x + 80 = 870 + 80 = 950 km/h, So, the first plane's airspeed is 870 km/h and the second plane's airspeed is 950 km/h.

To know more about variable click here

brainly.com/question/2466865

#SPJ11

When a balloon filled with helium at sea level is taken into the mountains to an elevation of 7500 feet, several things can happen:

The balloon may expand

As we go higher in altitude, the atmospheric pressure decreases. This means that the pressure outside the balloon is lower at higher elevations compared to sea level. If the pressure inside the balloon remains constant, the difference in pressure between the inside and outside of the balloon increases, causing the balloon to expand.

The balloon may burst:

If the pressure inside the balloon is significantly higher than the pressure outside the balloon at the higher altitude, it may exceed the structural integrity of the balloon, causing it to burst or pop.

The balloon may deflate:

If the pressure inside the balloon is lower than the pressure outside the balloon at the higher altitude, the helium gas inside the balloon may escape, causing the balloon to deflate.

The exact outcome would depend on various factors such as the elasticity and strength of the balloon material, the volume of helium inside the balloon, the temperature, and the atmospheric conditions at the specific altitude. It is important to take into consideration the potential effects of altitude changes when using helium-filled balloons or any other gas-filled containers in different elevations to avoid potential hazards.

To know more about Atmospheric Pressure refer here:

https://brainly.com/question/30166820

#SPJ11