According to the electron configuration, which atom will be the most reactive?
1s^2 2s^2
1s^2 2s^2 2p^6 3s^2
1s^2 2s^2 2p^6 3s^2 3p^6
1s^2 2s^2 2p^6 3s^2 3p^6 4s^2

Answer:

A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products. The properties of the products are different from those of the reactants.

I hope this helps.

Answer:

The key to understanding why ionic and covalent compounds have different properties from each other is understanding what's going on with the electrons in a compound. Ionic bonds form when atoms have different electronegativity values from each other. When the electronegativity values are comparable, covalent bonds form.

But, what does this mean? Electronegativity is a measure of how easily an atom attracts bonding electrons. If two atoms attract electrons more or less equally, they share the electrons. Sharing electrons results in less polarity or inequality of charge distribution. In contrast, if one atom attracts bonding electrons more strongly than the other, the bond is polar.

Ionic compounds dissolve in polar solvents (like water), stack neatly on each other to form crystals, and require a lot of energy for their chemical bonds to break. Covalent compounds can be either polar or nonpolar, but they contain weaker bonds than ionic compounds because they are sharing electrons. So, their melting and boiling points are lower and they are softer.

I hope this helps have a great day :)

[MnCl6] 3- is high spin and has five unpaired electrons while [Mn(CN)6] 3- has only two unpaired electrons.

A complex may be low spin or high spin depending on the kind of ligand attached to the central metal atom/ion. If the ligand is a weak field ligand, the complex may be high spin (maximum number of unpaired electrons). If the complex is low spin, there are few unpaired electrons (minimum number of unpaired electrons). In that case, the ligand is a strong field ligand.

In the octahedral geometry,  [MnCl6] 3- is high spin and has five unpaired electrons since the chloride ion is a weak field ligand. On the other hand  [Mn(CN)6] 3- has only two unpaired electrons because the cyanide ion is a strong field ligand.

Learn more: https://brainly.com/question/6111443

Explanation:

gravity

kinetic energy

less than

friction resists the ball's movement

2.0 m/s

change its direction

speed

newton's first law

dump truck

position

Answer:

Q1 - Gravity

Q2 - Kinetic Energy

Q3 - Less than

Q4 - Friction resists the ball's forward motion

Q5 - 2 m/a

Q6 - Change its speed

Q7 - Speed

Q8 - Second law

Q9 - a dump truck

Q10 - motion

I am not sure about some answers but I answered all questions.

Answer:

Many chemical reactions are reversible; that is, the products of the reaction can combine to re-form the reactants. An example of a reversible reaction is that of hydrogen with iodine to form hydrogen iodide:

H2(g) + I2(g) 2 HI(g)

We can study this reversible reaction by placing hydrogen and iodine in a reaction vessel and then measuring the concentrations of H2, I2, and HI at various times after the reactants are mixed. Figure 13.8 is a plot of the concentrations of reactants and products of this reaction versus time. The concentration of hydrogen iodide increases very rapidly at first, then more slowly, and finally, after the time indicated by the vertical line marked "Equilibrium," remains constant. Similarly, the concentrations of hydrogen and iodine are large at the start of the reaction but decrease, rapidly at first, and then more slowly. Finally, they, too, become constant.

If this reaction were not reversible, the concentrations of hydrogen and iodine would have continued to decrease and the concentration of hydrogen iodide to increase. This process does not happen. Instead, as soon as any molecules of hydrogen iodide are formed, some decompose into hydrogen and iodine. Two reactions are taking place simultaneously: the formation of hydrogen iodide and its decomposition. When the concentrations of all these components become constant (at the equilibrium point in Figure 13.8), the rate of the forward reaction (H2 + I2 2 HI) must be equal to the rate of the reverse reaction (2 HI H2 + I2). A state of dynamic chemical equilibrium has then been reached, one in which two opposing reactions are proceeding at equal rates, with no net changes in concentration.

PICTURE 13.8

FIGURE 13.8 Concentration changes during the reversible reaction

H2(g) + I2(g) 2 HI as it proceeds toward equilibrium.

We have encountered this criterion for equilibrium before. In the equilibrium between a liquid and its vapor, the rate of vaporization is equal to the rate of condensation. In the equilibrium of a saturated solution with undissolved solute, the rate of dissolution is equal to the rate of precipitation. In the equilibrium of a weak acid with its ions, the rate of dissociation is equal to the rate of recombination. Note that none of these reactions is static: Two opposing changes are occurring at equal rates.

B. The Characteristics of Chemical Equilibrium

1. Equal rates

At equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction.

2. Constant concentrations

At equilibrium, the concentrations of the substances participating in the equilibrium are constant. Although individual reactant molecules may be reacting to form product molecules and individual product molecules may be reacting to re-form the reactants, the concentrations of the reactants and the products remain constant.

3. No free energy change

At equilibrium, the free energy change is zero. Neither the forward nor the reverse reaction is spontaneous and neither is favored. Consider the ice-water change. Above 0°C, ice melts spontaneously to form liquid water; G for this change is negative. Below 0°C, the change from ice to water is not spontaneous; G is positive. At 0°C, the two states are in equilibrium. The rate of melting is equal to the rate of freezing: the amount of ice and water and the amount of liquid water present remain constant, and the free energy change is zero as long as no energy is added to or subtracted from the mixture.

C. The Equilibrium Constant

In Chapter 12, we introduced the mathematical relationship between the concentrations of the components of an equilibrium, known as the equilibrium constant, Keq. We said that, for the general equation of a reversible reaction

Explanation:

sorry(: hope to help

Answer:

heat the solution

Explanation:

i think

Answer:

The way to make a supersaturated solution is to add heat, but just a little heat won't do the job. You have to heat the water close to the boiling point. When the water gets this hot, the water molecules have more freedom to move around, and there is more space for solute molecules between them.

The final temperature of the mixture in the coffee cup calorimeter is; 19.467 °C

According to the law of energy conservation:

As such; the heat transfer in the liquid water is equal to heat gained by the ice

Heat transfer by liquid water is therefore;

However, since 18g of water makes one mole

T2 = 19.467°C

Read more on heat:

https://brainly.com/question/21406849

Answer:

6 moles

Explanation:

Looking at the coefficient of the reactants/ products, the ratio of Fe consumed to Fe₂O₃ produced is 4: 2.

Fe: Fe₂O₃

= 4: 2

= 2: 1

This means that the amount of Fe₂O₃ produced is half the amount of Fe consumed, in terms of moles.

Given that 12 moles of Fe are consumed,

amount of Fe₂O₃ produced

= 12 ÷2

= 6 moles

Answer:

see explanation

Explanation:

4Fe +3O2----------2Fe2O3

if we have 12 moles of Fe, we have 3X4 mole of Fe

but since 4 moles of Fe produce 2 moles of Fe2O3,6 then 3X 4 moles of Fe produce 3X2 moles of Fe2O3 or

6 moles.

One mole of Fe2O3 has a molar mass of (56X2) +(3X16) = 112+48 = 160

One mole Fe2O3 has a molar mass of 160 gm

6 moles of Fe2O3 have a mass of 160 X6 =960 gm

Answer:one mole of gold

The chemical transformation of a carbon-carbon double bond is by addition reaction. The statement best describes the driving force is that the reaction is favorable because the total bond strength in the products is greater than in the reactants.

The bond energies of a molecule is simply known as the energies needed to break all the covalent bonds in the molecule.

When the bond energies of the product molecules is known to be greater than the bond energies of the reactants, the reaction is regarded as exothermic.

The full question is below

Which statement best describes the driving force behind the electrophilic addition of strong acid to an alkene?

The reaction is favorable because the pi bond is stronger than a sigma bond and it takes more energy to break it.

The reaction is favorable because a less stable, high-energy intermediate is formed.

The reaction is favorable because the first step is the rate-determining step.

The reaction is favorable because the total bond strength in the products is greater than in the reactants.

The reaction is favorable because the overall reaction is endothermic.

Learn more from

https://brainly.com/question/17544844

:

Answer:

16.7%

Explanation:

40 ml of salt water + 200 ml of solution = 240 ml

40/240 = 4/24 = 1/6=16.7%

Explanation:

Mixture is the physical Combination Of two or Substance

Example

a mixture of sugar and water.

Compound is the chemical combination of two or more metals.

Example.

a mixture of hydrogen and water.

A mixture of hydrogen and oxygen forms water or H2O

whereas The dihydrogen monoxide parody involves calling water by an unfamiliar chemical name, most often "dihydrogen monoxide" (DHMO), and listing some of water's properties in a particularly alarming manner, such as accelerating corrosion (rust) and causing suffocation (drowning). The parody often calls for dihydrogen monoxide to be banned, regulated, or labeled as dangerous. It plays into chemophobia and demonstrates how a lack of scientific literacy and an exaggerated analysis can lead to misplaced fears. The parody has been used with other chemical names such as hydrogen hydroxide, dihydrogen oxide, hydroxic acid, hydric acid and oxidane.

A Mixture of hydrogen and oxygen in varying concentrations can be sparked to produce water. This is formed due to the property of chemical combination.

A Mixture is the physical Combination Of two or Substance whereas a Compound is the chemical combination of two or more metals.

Example of a mixture is a mixture of sugar and water. And, Example of an compound is A mixture of hydrogen and oxygen forms water or H₂O

Water is also called as dihydrogen monoxide. The prefix mono and di are used to indicate a single atom and combination of two atoms respectively.   Some of its properties includes such as accelerating corrosion (rust) and causing suffocation (drowning).

To know more about mixture here

https://brainly.com/question/30667328

#SPJ3

Answer:

a reaction in which electrons are transferred between different atoms

Explanation:

I took the test and got it right :)

c. a reaction in which electrons are released from the system

Oxidation:

Learn more:

brainly.com/question/24333944

[tex]pH = -\log[H^{+}] \\\\\implies \log[H^{+}] = -pH\\\\\implies [H^{+}] = 10^{-pH}\\\\\implies [H^{+}] = 10^{-4.83} = 0.000015[/tex]

The molarity of the solution is 0.01.

Brainliest?

AnswerExplanation:I finsished d

Answer:

17.55L

Explanation:

0.48mol : 11.7

0.72mol :   x

0.48x = 8.424

x = 17.55

Answer:

0.00132moles

Explanation:

1000ml of NaOH contain 0.110 moles

12ml of NaOH contain (12*0.110)/1000 moles

= 0.00132 moles

Answer:

Cr

Explanation:

Cr goes from +3 to +6 and when it increases it means is being oxidized.

The element being oxidized in the redox reaction is Cr. Oxidation state helps to determine the amount of oxidation which an atom undergoes. An increase in oxidation state or number signifies oxidation has taken place.

A decrease in oxidation state depicts reduction has taken place. In this

scenario, the element Cr has a change in oxidation state from +3 to +6 which

signifies oxidation took place in the atoms of the element. This is why Cr will

be the right option.

Read more on https://brainly.com/question/25653911

This question is describing the following chemical reaction at equilibrium:

[tex]A\rightleftharpoons B[/tex]

And provides the relative amounts of both A and B at 25 °C and 75 °C, this means the equilibrium expressions and equilibrium constants can be written as:

[tex]K_1=\frac{90\%}{10\%}=9\\\\K_2=\frac{20\%}{80\%} =0.25[/tex]

Thus, by recalling the Van't Hoff's equation, we can write:

[tex]ln(K_2/K_1)=-\frac{\Delta H}{R}(\frac{1}{T_2} -\frac{1}{T_1} )[/tex]

Hence, we solve for the enthalpy change as follows:

[tex]\Delta H=\frac{-R*ln(K_2/K_1)}{(\frac{1}{T_2} -\frac{1}{T_1} ) }[/tex]

Finally, we plug in the numbers to obtain:

[tex]\Delta H=\frac{-8.314\frac{J}{mol*K} *ln(0.25/9)}{[\frac{1}{(75+273.15)K} -\frac{1}{(25+273.15)K} ] } \\\\\\\Delta H=4,785.1\frac{J}{mol}[/tex]

Learn more:

Answer:

Meiosis produces haploid cells (gametes), which contain single chromosomes, or on-half the number of chromosomes in diploid cells. When a sperm and an egg join, the single chromosomes pair up, which results in genetic diversity in the offspring

-Sound waves transfer energy by the motion of particles.

Explanation:

These particle-to-particle, mechanical vibrations of sound conductance qualify sound waves as mechanical waves. Sound energy, or energy associated with the vibrations created by a vibrating source, requires a medium to travel, which makes sound energy a mechanical wave.

Sound waves transfer energy by the motion of particles considered a type of mechanical energy.

Potential energy plus kinetic energy are combined to form mechanical energy. According to the concept of mechanical energy conservation, mechanical energy remains constant in an isolated system that is solely exposed to conservative forces.

The quantity of energy that a force transfers is known as mechanical work. It is a scalar quantity with joules as its SI unit, much as energy.

Since there are only microscopic forces generated by atomic collisions and no macroscopically quantifiable force, heat conduction is not regarded as a kind of work.

Transverse, longitudinal, and surface waves are the three different forms of mechanical waves. When the wave's energy goes through them, they behave differently in terms of how the medium's particles move.

Thus, option C is correct.

To learn more about mechanical energy follow the link;

https://brainly.com/question/1932868

#SPJ2

Answer:

Sodium hydroxide.

Explanation:

Don't be confused by the fact that you have three reactants, you can find the limiting reagent by using the same technique you use for reactions that have two reactants.

for more info... use the link

https://socratic.org/questions/which-substance-is-the-limiting-reactant-when-2-0-g-of-sulfur-reacts-with-3-0-g-#171384

hope it helps and please give brainliest

ThAnK YoU

Answer:

solution

Explanation:

solvent +solute =solution

Explanation:

It can take up to two years to become a pharmacy technician, depending on the education program you choose. In fact, most pharmacy certification programs can be in a year, or less than eight months.

Answer:

1.1 million pounds

Explanation:

Answer:

1.1 million pounds

Explanation:

that's a lot of water above us!!

The following properties change across the periodic Table from group 1 to group 2

Group 1 are alkali metals that have one valence electron in the outermost orbit whereas alkaline earth metals are in group 2 have two valence electrons in the outermost orbit.

a) Ionic radius:

b) Ionisation enthalpy:

c) Density:

d) Melting point:

e) Electropositive character:

Thus, changes in properties are:

Learn more:

https://brainly.com/question/19172241