Answer:
Mass of Mg = 120 g
1.23 moles of Cu
Explanation:
A)
Given data:
Number of moles of Mg = 5 mol
Mass of Mg = ?
Solution:
Number of moles = mass/molar mass
Molar mass of magnesium is 24 g/mol.
5 mol = mass/ 24 g/mol
Mass = 5 mol × 24 g/mol
Mass = 120 g
B) Given data:
Number of atoms of Cu = 7.4 ×10²³ atom
Number of moles of Cu = ?
Solution:
Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance. The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ atoms
7.4 ×10²³ atom × 1 mol / 6.022 × 10²³ atom
1.23 moles of Cu
A steel tank contains a mixture of Ar and He gases. If the partial pressure of helium in the tank is 1085 mmHg, and the partial pressure of argon is 4867 mmHg, what is the total pressure in the tank (in atm)? Answer as a whole number
Answer:
8 atm
Explanation:
Given data:
Partial pressure of Ar = 4867 mmHg
Partial pressure of He = 1085 mmHg
Total pressure = ?
Solution:
According to Dalton law of partial pressure,
The total pressure inside container is equal to the sum of partial pressures of individual gases present in container.
Mathematical expression:
P(total) = P₁ + P₂ + P₃+ ............+Pₙ
Now we will solve this problem by using this law.
P(total) = P(Ar) + P(He)
P(total) = 4867 mmHg + 1085 mmHg
P(total) = 5952 mmHg
mmHg to atm;
5952 /760 = 7.83 atm
P(total) = 8 atm
Indicate whether each of the following statements about Joseph Priestley’s experiment is an observation or an inference.
The candle stayed lit longer because the plant gave off oxygen.
The candle went out when it was placed in a closed jar.
The candle stayed lit longer in closed jar when a plant was present.
Answer:
Inference — The candle stayed lit longer because the plant gave off oxygen.
Observation — The candle went out when it was placed in a closed jar.
Observation — The candle stayed lit longer in closed jar when a plant was present.
Explanation:
Tap the THANKS button and RATE ⭐️
(If helpful)
Joseph Priestley discovered the element oxygen which is most precious for living. He discovered the need of oxygen to respire and release by plants during photosynthesis.
What is photosynthesis?Photosynthesis is the process of synthesis of glucose using carbon dioxide and water with the aid of light energy. The process makes energy for all the living organism in earth.
Plants uptake carbon dioxide and release oxygen during photosynthesis which makes oxygen abundant in the atmosphere.Thus, presence of plants give us air and remove carbon dioxide formed by respiration.
Priestley's conducted an experiment with a mouse placed in a closed jar and candle light inside. When the jar is close, there will be no air inside make the rat perish and candle light off. When he placed a plant inside the jar it released oxygen which made the rat alive a little longer.
Candle light stayed a lit longer by the presence of the plant. Thus option A is correct. Priestley concluded that buring needs oxygen.
To find more about oxygen, refer the link below:
https://brainly.com/question/2272415
#SPJ2
Which action can speed up the rate of a chemical reaction?
A removing a catalyst
B lowering the reactant concentration
C lowering the temperature
D breaking a reactant into smaller pieces
The action can speed up the rate of a chemical reaction is breaking a reactant into smaller pieces.
What is rate of reaction?Rate of a chemical reaction tells about the duration of time at which reaction complete.
Rate of reaction is also define as the rate of change of concentration of reactant with respect to the time. So, concentration of reactant is directly proportional to the rate of a reaction and wherever we increases the surface area of reactant rate increases as reactant will participate through large possible side. Catalyst also speeds up the reaction without being involved in it and high temperature also increases the kinetic energy of the reactant to do effective collision.
Hence, option (d) is correct i.e. breaking a reactant into smaller pieces increases the rate.
To know more about rate of reaction, visit the below link:
https://brainly.com/question/25724512
How many moles of CO2 are produced when 2.5 moles of O2 react according to the following equation? C3H5 + 5 O2 → 3 CO2 + 4 H2O
Answer:
1.5
Explanation:
C3H5 + 5 O2 → 3 CO2 + 4 H2O
3.75 moles of CO2 are produced when 2.5 moles of O2 react.
The following chemical equation is given:
C3H8 + 5O2 → 3CO2 + 4H2O
Based on this balanced chemical equation, 5 moles of O2 react to produce 3 moles of CO2
Stoichiometrically, if 2.5 moles of O2 react, then:
2.5 × 3/2 moles of CO2 will be produced
= 2.5 × 1.5
= 3.75moles
Therefore, based on the balanced chemical equation between propane (C3H8) and oxygen (O2), 2.5 moles of O2 will produce 3.75moles of CO2.
Learn more here: https://brainly.com/question/12880365
I NEED RIGHT NOW OR I GET AN F!!!!! HELP!!!!!
Describe the three main types of plate boundary interactions:
Divergent boundaries:
Convergent boundaries:
Transform boundaries:
Answer:
boundary interactions: areas where plates move away from each other forming mid-ocean ridges or rift valleys.
divergent boundaries: this happens when 2 tectonic plates move away from each other. along these boundaries earthquakes and magma are common as they are rise from the mantle to the sruface making new oceanic crust.
convergent boundaries: this is an area on earth where 2 or more lithospheric plates collide. they will slide under one another creating a subduction.
transform boundaries: transform boundary is a fault along a plate boundary where the motion is predominantly horizontal. It ends abruptly where it connects to another plate boundary, either another transform, a spreading ridge, or a subduction zone.
Explanation:
lithosperic means the solid outer part of the earth.
hope this helps and good luck! :) <3
Mendeleev created this table as he noticed that a
metal that was reactive with water always seemed to
come before a metal that was also very reactive and
then a less reactive metal, noticing a pattern in
chemical properties. But what group of atoms did he
totally leave out? Why do you think that is?
Answer:
Mendeleev had left the noble gases out of his periodic table.
Explanation:
Mendeleev's periodic table is pictured in the image attached to the question.
Mendeleev's table obviously lacked the noble gases. The reason for this grave omission is simple; the noble gases were not known as at the time when he formulated his periodic table. There weren't any known elements whose properties were similar to the properties of the noble gases. This would have lead him to suspect their existence.
Which event takes place first in the stages before the brith of a star
Answer:
nuclear fusion
Explanation:
gravity pulls gas and dust together a protostar forms as mass increases nuclear fusion begins under high pressure
Identify the correct order of electron transfers in the electron transport chain starting from FADH2.
Answer:
FADH₂ → Q coenzyme → Complex III → c cytochrome → Complex IV → O₂
Explanation:
During oxidative phosphorylation, the electrons from NADH and FADH₂ are combined with O₂ and the energy released in the process is used to synthesize ATP from ADP.
The components of the electron transport chain are located in the internal part of the mitochondrial membrane in eukaryotic cells, and in the cell membrane in bacteria. The transporters in the electron transport chain are organized into four complexes in the inner mitochondrial membrane. A fifth complex then couples these reactions to the ATP synthesis.
Complex II receives the electrons from the succinate, which is an intermediary in the Krebs cycle. These electrons are transferred to the FADH₂ and then to the Q coenzyme. This liposoluble molecule will transport the electrons from Complex II to Complex III. In this complex, the electrons are transferred from the b cytochrome to the c cytochrome. This c cytochrome, which is a peripheric membrane protein located in the external part of the inner membrane, then transports the electrons to Complex IV where finally they are transferred to the oxygen.
What is the pH of a solution in which [H 3O +] = 3.8 × 10 -8 M?
Answer:
The answer is 7.42Explanation:
The pH of a solution can be found by using the formula
[tex]pH = - log [ { H_3O}^{+}][/tex]
From the question we have
[tex]pH = - log(3.8 \times {10}^{ - 8} ) \\ = 7.420216...[/tex]
We have the final answer as
7.42Hope this helps you
explain why sodium trioxocarbonate is an alkaline
Answer:
Sodium triocarbonate (IV) is hydrolyzed in water.
Explanation:
" When sodium carbonate is added to water, it hydrolyses to give sodium bicarbonate and sodium hydroxide (a strong base). As a result, the solution becomes alkaline. ... This is because the liberated metals react with water."
Alkaline: of, relating to, containing, or having the properties of an alkali or alkali metal : basic especially, of a solution (water is a solution).
I hope this answers your question! Let me know if it doesn't!
plzz helpp mee putttt
Answer:
The first one is C and the second one is A
Explanation:
Looking at the picture, the horse-like fossil was able to walk and run
The second one is sedimentary because fossils are preserved in the sedimentary rock
The graph shows the distance an object travel in 11 seconds which answer choice best describes the movement of the object between the times of 0 and 6 seconds on the graph
Answer:
its moving at a constant speed
Explanation:
i did the test and got it right
a sample of hydrogen gas (h2) is mixed with water vapor (h2o (g)). the make sure has a total pressure of 811 torr, and the water vapor has a partial pressure of 12 torr. how many moles of hydrogen gas are present in a 10.0 l mixture at 298k?
Answer:
[tex]n=0.430molH_2[/tex]
Explanation:
Hello!
In this case, considering the partial Dalton's law of partial pressures, we can notice that the total pressure equals the pressure of steam and the pressure of hydrogen, which can be determined as shown below:
[tex]p_T=p_H+p_w\\\\p_H=811torr-12torr=799torr*\frac{1atm}{760torr}\\\\p_H=1.05atm[/tex]
Thus, by using the ideal gas law, we can compute the moles of hydrogen as shown below:
[tex]PV=nRT\\\\n= \frac{PV}{RT}=\frac{1.05atm*10.0L}{0.082\frac{atm*L}{mol*K}*298K}\\\\n=0.430molH_2[/tex]
Best regards!
If 6.81 mol of an ideal gas has a pressure of 2.99 atm and a volume of 94.35 L, what is the temperature of the sample?
Answer:
504.57 K.
Explanation:
From the question given above, the following data were obtained:
Number of mole (n) = 6.81 moles
Pressure (P) = 2.99 atm
Volume (V) = 94.35 L
Gas constant (R) = 0.0821 atm.L/Kmol
Temperature (T) =.?
Using the ideal gas equation, the temperature of the ideal gas can be obtained as follow:
PV = nRT
2.99 × 94.35 = 6.81 × 0.0821 × T
282.1065 = 0.559101 × T
Divide both side by 0.559101
T = 282.1065 / 0.559101
T = 504.57 K.
Thus, the temperature of the ideal gas is 504.57 K.
2) Why do transition elements show variable
oxidation states
Answer:
These elements show variable oxidation state because their valence electrons in two different sets of orbitals, that is (n-1)d and ns. The energy difference between these orbitals is very less, so both the energy levels can be used for bond formation. Thus, transition elements have variable oxidation states
Write a balanced molecular equation (photo)
Answer:
Ba + 2HCl = BaCl₂ + H₂
Explanation:
The equation for Magnesiunm's reaction with hydrochloric acid is
Mg + 2HCl = MgCl₂ + H₂
So, just replace magnesium in the equation above and you get the equation for barium's reaction with hydrochloric acid.
A sample of carbon dioxide is contained in a 250.0 mL flask at 0.917 atm and 19.3 ∘ C. How many molecules of gas are in the sample?
Answer:
The correct answer is 5.76 x 10²¹ molecules
Explanation:
From the problem, we have the following data:
V= 250.0 mL = 0.25 L
P= 0.917 atm
T= 19.3∘C + 273 = 292.3 K
We can use the ideal gas law to find n (number of moles of gas):
PV= nRT
⇒ n = PV/RT = (0.917 atm x 0.25 L)/(0.082 L.atm/K.mol x 292.3 K) = 9.6 x 10⁻³ mol
We know that 1 mol of any compound is equal to 6.022 x 10²³ molecules of the compound⇒ ratio : 6.022 x 10²³ molecules/1 mol
Thus, we multiply n by the ratio to obtain the number of molecules of gas:
9.6 x 10⁻³ mol x 6.022 x 10²³ molecules/1 mol = 5.76 x 10²¹ molecules
Ocean waves are hitting a beach with a frequency of 0. 100 HZ the average weight for length is 15.0 M what is the average speed
Answer:
Speed of wave = 1.5 m/s
Explanation:
Given data:
Frequency of wave = 0.100 Hz
wavelength of wave = 15.0 m
Average speed = ?
Solution:
Speed of wave = frequency × wavelength
Speed of wave = 0.100 Hz × 15.0 m
Hz = s⁻¹
Speed of wave = 1.5 m/s
URGENT:
(I’ll give first person brainlyist)
What type of elements typically become positively charged ions?
Answer:
The elements that are commonly positive ions are metals. But there are a few gases that can become positively charged by losing electrons.
Typically, when metals and non-metals interact, the metals' electrons are transferred to the non-metals. In contrast to non-metals, which form negatively charged ions, metals form positively charged ions.
The non-metal picks up electrons and gets negatively charged, whereas the metal loses electrons and gets positively charged. Cations and anions are the names given to positively and negatively charged ions, respectively.
Metals are the elements that lose electrons to generate positively charged ions (cations) in all chemical processes, with the exception of hydrogen. Metals are electropositive elements as a result.
To know more about metals, visit;
https://brainly.com/question/29766835
#SPJ6
Select True or False: A mixture made from 10 mL of 1 M HCl and 20 mL of 1 M CH3COONa would be classified as a buffer solution.
Answer:
True.
Explanation:
There are three ways to make a buffer.
a. Generating a solution of a weak acid and its conjugate base.
b. Adding to a solution of a weak acid a certain quantity of
strong base, so that the acid remains in excess.
c. adding a limited amount to a conjugate base solution
of strong acid so that the base remains in excess.
We are in c, in this situation.
How do you calculate, pH? We apply Henderson Hasselbach.
pH = pka + log (mmoles base - mmoles acid)/ mmoles acid
pH = pKa + log ((20 ml . 1 M - 1 ml . 10M) / 10 mmoles
pH = 4.76 + log 1 → 4.76 ⇒ pH = pKa
Consider a three-dimensional model of methane as seen here in two dimensions. If we use VSEPR theory to describe the geometry of a methane molecule we say its shape is. A) Linear. B) Tetrahedral. C)Trigonal Planar. D)Trigonal Bipyramidal
Answer:B
Explanation:
Tetrahedral I took the test
Answer:
B is the answer'
Explanation:
What is the maximum number of electrons on the outer layer of atoms?
Answer:
8 electrons
Explanation:
What information would you need to determine the most likely resonance structure for the molecule?
A. The formal charge of each atom
B. The polarity of each covalent bond
C. The Lewis structure of the molecule
D. The bond length of each covalent bond
Answer:
The Formal Charge of Each Atom
Explanation:
I just took the test!
Answer:
A. The formal charge of each atom
Explanation:
Use the periodic table to match each of the following element symbols to its name, atomic mass, or atomic number. (3 points)
1.
Se
2.
S
3.
Sn
a.
Tin
b.
78.971 u (atomic mass)
c.
16 (atomic number)
Answer:
Tin I thunk
Explanation:
I think
Answer:
sn = tin
se = 78.971 u (atomic mass)
s = 16 (atomic number)
critically evaluate the role of human beings in perpetuating climate change
Explanation:
To many people around the world, earth is considered to be a place for human beings to live together as one big family. It provides us shelters, foods, water, and the most beautiful sceneries. Without doubt, we are bound to nature. However because the existence of climate change, which according to scientists is defined as the long term changes over climate including temperature and rainfall, the world would probably end up with devastated ecosystem, extinct wildlife, and most importantly despondent humans. The impact that it has on us is incredibly strong that it affects the system of human lives and wildlife. Global warming, precipitating weather, glaciers, and rising of sea level are no more phenom
A geneticist has discovered a new compound that is made up of a small number of identical
subunits. The subunits are joined end to end in long chains. Based on this information, what
best can be concluded about these subunits?
A. They are ketones.
B. They are hydrocarbons.
C. They are monomers.
D. They are polymers.
Answer:
They are monomers.
Explanation:
Edg 2020
Answer:
C.monomers
Explanation:
edg. 2020 read and use common sense
30.1 grams of ice at -250^oC would be required how many kj to increase it's temperature to 15.0^ᴏC
Answer:
16.1923 kj
Explanation:
Given data:
Mass of ice = 30.1 g
Initial temperature = -250 °C
Final temperature = 15.0 °C
Energy required = ?
Solution:
Specific heat capacity of ice is 2.03 J/g.°C
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = 15.0°C - (-250 °C)
ΔT = 265°C
Q = 30.1 g × 2.03 J/g.°C × 265°C
Q = 16192.3 J
J to kJ:
16192.3 J × 1 KJ /1000 j
16.1923 kj
The fact that the four new elements are Period 7 of the table means that they all
A.have seven shells of electrons
B. have seven valence electrons
C. form ions with charges of 7+
D. have an effective nuclear charge of 7+
Answer:
C
Explanation:
form ions with charges of 7+
Which EMW can humans see?
Answer:
visible light waves are the only electromagnetic waves we can see
15.0 L of an ideal gas at 298 K and 3.36 atm are heated to 383 K with a new pressure of 5.60 atm. What is the new volume in liters
Answer:
[tex]V_2=11.6L[/tex]
Explanation:
Hello!
In this case, since we volume, pressure and temperature which are all changing, we can use the combined ideal gas law to write:
[tex]\frac{P_1V_1}{T_1} =\frac{P_2V_2}{T_2}[/tex]
Thus, since the final volume V2 is required, by solving for it, we write:
[tex]V_2=\frac{P_1V_1T_2}{T_1P_2}[/tex]
In such a way, we plug in the given data to obtain:
[tex]V_2=\frac{3.36atm*15.0L*383K}{298K*5.60atm}\\\\V_2=11.6L[/tex]
Which means that the process compressed the gas.
Best regards.