a wave has an angular frequency of 173 rad/s and a wavelength of 1.89 m. calculate (a) the angular wave number and (b) the speed of the wave.

The speed of the proton after completing the displacement is 5.81 * 10^{5} m/s.

Electric Field: Electric field is defined as the electric force per unit charge. It is a vector quantity, and the SI unit for electric field strength is Newtons per coulomb (N/C).Displacement: The total change in position of an object is known as displacement. The symbol for displacement is “d.” It is a vector quantity because it has both magnitude and direction.Speed: Speed is a scalar quantity that refers to how fast an object is moving. It is defined as the distance traveled divided by the time it takes to travel that distance. The SI unit for speed is meters per second (m/s).Solution: The electric field strength E = 8 * 104 V/m.The displacement d = 0.5 m.The electric field force acting on a proton F = q *E, where q is the charge of the proton. q = + 1.602 * 10^{-19} Coulombs.

F = 1.602 * 10^{-19} C* 8 * 104 N/C = 1.282 *10^{-14} N.The proton travels a distance of d = 0.5 m in the direction of the electric field force, so the work done by the electric field is W = F * d = (1.282 * 10^{-14} N) * (0.5 m) = 6.41 * 10^{-15} J.The total work done by the electric field on the proton is equal to the change in kinetic energy of the proton.

W = Kf − Ki.Ki = 0 (initial velocity is zero).Kf = W = 6.41* 10^{-15} J.

Kf = (\frac{1}{2})mvf2 (final velocity is vf).vf = sqrt{(\frac{2Kf}{m}).

The mass of the proton is m = 1.67 * 10^{-27} kg.vf = sqrt{[\frac{(2 * 6.41 * 10^{-15} J) }{(1.67 * 10^{-27} kg)}]} = 5.81 * 10^{5} m/s.

.Therefore, the speed of the proton after completing the displacement is 5.81 * 10^{5} m/s.

learn more about Electric Field Refer: https://brainly.com/question/26690770

#SPJ11

The helium is being cooled, its overall volume will still increase due to the expanding effect.

When helium is cooled from 31.0 °C to -6.0 °C, its volume will decrease due to the reduction of its kinetic energy. However, when it is also expanded from a volume of 1.0 L to 10.0 L, its volume will increase due to the increase in the available space for the gas molecules to occupy. The overall effect of cooling and expanding on the volume of helium will depend on which effect is dominant.

If the cooling effect dominates, the volume of helium will decrease. This is because the decrease in kinetic energy will cause the gas molecules to move more slowly and occupy less space. However, if the expanding effect dominates, the volume of helium will increase. This is because the increase in available space will allow the gas molecules to spread out and occupy more space.

In this case, it is likely that the expanding effect will dominate since the volume is increasing by a factor of 10. Therefore, even though the helium is being cooled, its overall volume will still increase due to the expanding effect.

To know more about kinetic energy visit:

https://brainly.com/question/26472013

#SPJ11

Based on the information you provided, the cheap cell phone camera uses a single lens to form an image on a sensor that is 10 mm high and 6.5 mm behind the lens. This means that when you take a photo, the lens captures the light and focuses it onto the sensor, which then records the image.

It's important to note that the distance between the lens and the sensor (6.5 mm) is known as the focal length. This distance determines how much the image is magnified and how much of the scene is in focus. In general, shorter focal lengths (i.e. lenses that are closer to the sensor) capture wider views, while longer focal lengths (i.e. lenses that are farther from the sensor) capture narrower views.

In terms of the actual image quality, a cheap cell phone camera is likely to have some limitations compared to a more expensive camera. For example, it may struggle in low light conditions, have limited zoom capabilities, and produce images that are less sharp or detailed. However, it can still be a useful tool for taking quick snapshots and sharing them with others.

You can learn more about sensors at: brainly.com/question/15272439

#SPJ11

To determine the average speed of air in the duct, we can use the formula:
Average speed = Volume flow rate / Cross-sectional area of the duct
First, we need to find the volume of the house and the volume flow rate:
Volume of house = width × length × height = 11 m × 20.5 m × 3.15 m = 709.725 m³

Since the air is replaced every 15 minutes, we need to convert it to an hourly rate:
Volume flow rate (hourly) = 709.725 m³ × (60 min / 15 min) = 2838.9 m³/h
Next, we calculate the cross-sectional area of the duct:
Area of duct = π × (diameter / 2)² = π × (0.31 m / 2)² ≈ 0.0754 m²
Finally, we can calculate the average speed of air in the duct:
Average speed = Volume flow rate / Cross-sectional area of the duct = 2838.9 m³/h / 0.0754 m² ≈ 37,687 m/h
To convert this to a more standard unit, we'll change it to meters per second (m/s):
Average speed = 37,687 m/h × (1 h / 3600 s) ≈ 10.47 m/s
Therefore, the average speed of air in the duct is approximately 10.47 m/s.

To know more about speed visit:

https://brainly.com/question/28224010

#SPJ11

In this case, the current is given by:
I = (Vs - Vr) / R
Where Vs is the voltage source (24V) and Vr is the voltage across the resistor at any given time.

To design a circuit with an applied voltage of 24V and a resistor of 1kohm to reach 24V in 2 seconds, you can use an RC circuit.

First, you need to calculate the capacitance value required for the RC circuit. You can use the formula:
C = t/(R * ln(Vs/V0))
Where C is the capacitance, t is the time (2 seconds in this case), R is the resistance (1kohm in this case), Vs is the final voltage (24V), and V0 is the initial voltage (0V).
Plugging in the values, we get:
C = 2/(1000 * ln(24/0))
C = 9.932 uF (rounded to nearest uF)
Next, you can choose a capacitor with a value close to 9.932 uF.
Once you have the capacitor, you can connect it in series with the resistor and the voltage source. The circuit should look like this:
Voltage Source (+) ----- Resistor ----- Capacitor ----- Ground (-)
When the circuit is powered on, the capacitor will start to charge up through the resistor. The voltage across the capacitor will increase gradually until it reaches 24V after 2 seconds.
Note that the voltage across the resistor will also increase as the capacitor charges up. You can calculate the voltage across the resistor using Ohm's law:
Vr = I * R
Where Vr is the voltage across the resistor, I is the current flowing through the circuit (which is the same as the current flowing through the resistor), and R is the resistance.
In this case, the current is given by:
I = (Vs - Vr) / R
Where Vs is the voltage source (24V) and Vr is the voltage across the resistor at any given time.
Using these formulas, you can design a circuit that meets the requirements specified in the question.

To know more about Capacitor visit:

https://brainly.com/question/17176550

#SPJ11

The uncollided flux of gamma rays in water can be expressed as S/µ using the inverse square law and the linear attenuation coefficient. The buildup flux, which accounts for scattered gamma rays, can be expressed as S/µ ∑ An/ (1+ɑn) using the Taylor form of the buildup factor.

(a) The uncollided flux at any point in the water can be obtained by considering the emitted gamma rays as a source of radiation and using the inverse square law. The uncollided flux is defined as the number of gamma rays passing through a unit area per unit time without any interaction. Therefore, the uncollided flux at any point in the water can be expressed as:

ᵠu = S/(4πr²)

where S is the rate of gamma ray emission per unit volume of water (cm³/s), r is the distance from the source of radiation (cm), and the factor of 4πr² is the surface area of a sphere with radius r.

The attenuation of gamma rays as they travel through the water can be described by the linear attenuation coefficient, µ. Therefore, the uncollided flux can also be expressed as:

ᵠu = Sexp(-µr)

where exp is the exponential function.

By equating the two expressions for the uncollided flux, we obtain:

S/(4πr²) = Sexp(-µr)

Simplifying this expression, we get:

ᵠu = S/µ

(b) The buildup flux refers to the contribution of the scattered gamma rays to the total flux at a point in the water. The buildup factor (B) is the ratio of the total flux (Φ) to the uncollided flux (ᵠu) at a point in the water. The total flux can be obtained by summing up the contributions from all the scattered gamma rays at that point. The Taylor form of the buildup factor can be expressed as:

B = ∑ An/ (1+ɑn)

where An and ɑn are parameters that depend on the geometry of the problem and the energy of the gamma rays.

The buildup flux (ᵠb) can be obtained by multiplying the uncollided flux with the buildup factor:

ᵠb = Bᵠu

Substituting the expression for the uncollided flux from part (a), we get:

ᵠb = S/µ ∑ An/ (1+ɑn)

Therefore, the buildup flux at any point in the water is given by the above expression.

To learn more about uncollided flux

https://brainly.com/question/13814830

#SPJ4

(a) The uncollided flux at any point in the water is given by ᵠu = S/µ, where S represents the rate of γ-rays emitted per cm³/sec throughout the water and µ denotes the linear attenuation coefficient.

(b) The buildup flux is given by ᵠb = S/µ ∑ An/(1+ɑn), where An and ɑn are parameters for the Taylor form of the buildup factor.

(a) To derive the uncollided flux, we consider the rate of γ-rays emitted per unit volume (S) and divide it by the linear attenuation coefficient (µ).

The linear attenuation coefficient represents the probability of γ-rays being absorbed or scattered as they traverse through the water. Dividing S by µ yields the uncollided flux (ᵠu) at any point in the water.

Therefore, the uncollided flux at any location within the water is determined by dividing the rate of γ-ray emission per cm³/sec (S) by the linear attenuation coefficient (µ).

(b) The buildup flux (ᵠb) accounts for the effects of both uncollided and collided γ-rays. It is obtained by multiplying the uncollided flux (S/µ) by the buildup factor, which quantifies the increase in γ-ray flux due to multiple scattering events.

The buildup factor is represented as ∑ An/(1+ɑn), where the parameters An and ɑn are derived from the Taylor series expansion of the buildup factor. Summing over the terms in the Taylor series provides an approximation of the total buildup effect on the flux.

Therefore, The buildup flux, ᵠb, is calculated by multiplying the rate of γ-ray emission per cm³/sec (S/µ) by the sum of An/(1+ɑn), where An and ɑn are parameters used in the Taylor series representation of the buildup factor.

To know more about buildup flux, refer here:

https://brainly.com/question/31963781#

#SPJ4

Drawing A, B and C best represent objects with kinetic energy.

Among the given drawings, three that best represent objects with kinetic energy are:

Drawing A: A rolling ball: This drawing depicts a ball in motion, representing an object with kinetic energy. The ball's movement indicates that it possesses energy due to its motion.

Drawing B: A swinging pendulum: This drawing illustrates a pendulum in motion, swinging back and forth. The swinging motion demonstrates the presence of kinetic energy as the pendulum moves through its arc.

Drawing C: A flying bird: This drawing showcases a bird in flight, capturing the essence of an object with kinetic energy. The bird's motion through the air indicates that it possesses energy due to its movement.

These three drawings effectively portray objects in motion, representing the concept of kinetic energy, which is the energy possessed by an object due to its motion.

For more such questions on kinetic energy

https://brainly.com/question/8101588

#SPJ11

The image will appear at a distance of 2/5 f from the mirror, virtual, upright, and reduced.

A convex mirror, also known as a diverging mirror, has a focal length of magnitude f. When an object is placed in front of this mirror at a point 2/3 f from the face of the mirror, the image that is formed will appear at different distances from the mirror depending on its characteristics.

- At a distance of O 2 f from the mirror, the image will be virtual, inverted, and diminished.
- At a distance of O 1/2 f from the mirror, the image will be virtual, upright, inverted, and enlarged.
- At a distance of O 5/2 f from the mirror, the image will be real, inverted, and enlarged.
- At a distance of O 3f from the mirror, the image will be real, upright, and enlarged.
- At a distance of 2/5 f from the mirror, the image will be virtual, upright, and reduced.

The characteristics of the image formed by a convex mirror are determined by the distance between the object and the mirror, as well as the shape and position of the mirror itself. Understanding these characteristics is important in fields such as optics and engineering, where convex mirrors are used in a variety of applications.

To know more about convex mirror refer to

https://brainly.com/question/3627454

#SPJ11

The object distance is 5.25 cm (positive sign) and the image distance is -3.19 cm (negative sign).

To determine the object and image distances in a diverging lens system, we can use the lens formula:

1/f = 1/do - 1/di

where:

f is the focal length of the lens,

do is the object distance, and

di is the image distance.

Given that the focal length |f| is 10.5 cm and the magnification is 0.610, we can rearrange the lens formula to solve for do and di.

First, we can use the magnification formula:

m = -di/do

where m is the magnification.

Substituting the given magnification value:

0.610 = -di/do

Next, we can rearrange the lens formula as follows:

1/f = 1/do - 1/di

Rearranging further:

1/di = 1/f - 1/do

Now, we substitute the given values:

1/di = 1/10.5 cm - 1/do

Since we have an expression for 1/di from the magnification formula, we can substitute it into the lens formula:

-1/do = 1/10.5 cm - 1/do

Combining the fractions:

-1/do = (do - 10.5 cm)/(10.5 cm * do)

Simplifying:

-1 = (do - 10.5 cm)/(10.5 cm * do)

Cross-multiplying:

-do = do - 10.5 cm

Simplifying further:

2do = 10.5 cm

Solving for do:

do = 5.25 cm (object distance)

Now, we can substitute this value back into the magnification formula to find di:

0.610 = -di/5.25 cm

Solving for di:

di = -3.19 cm (image distance)

Therefore, the object distance is 5.25 cm (positive sign) and the image distance is -3.19 cm (negative sign).

Learn more about image distances

brainly.com/question/29678788

#SPJ11

To calculate the slip of a generator, we need to know the synchronous speed and the actual speed of the generator. The synchronous speed of a generator can be calculated using the formula:

Synchronous speed = (120 x frequency) / number of poles

where frequency is in hertz and the number of poles is the number of magnetic poles in the generator.

For a 2-pole generator, the synchronous speed can be calculated as:

Synchronous speed = (120 x 60) / 2 = 3600 rpm

The actual speed of the generator can be calculated using the formula:

Actual speed = synchronous speed - slip x synchronous speed

where slip is the ratio of the difference between synchronous speed and actual speed to synchronous speed.

Let N be the actual speed of the generator in rpm. Then we have:

N = (1 - slip) x synchronous speed = (1 - slip) x 3600

The slip can be calculated using the formula:

Slip = (synchronous speed - actual speed) / synchronous speed

Now, we need to calculate the actual speed of the generator. The carrier plate rotates at 22 rpm, so the actual speed of the generator is the product of the carrier plate speed and the gear ratio of the generator. Let the gear ratio be G. Then we have:

N = 22 x G

Substituting this value of N in the equation above, we get:

22 x G = (1 - slip) x 3600

Solving for slip, we get:

slip = 1 - (22 x G) / 3600

We are given that the multiplication factors (MA) of each stage are 4, 6, and 9. The overall gear ratio G is the product of the individual gear ratios. Therefore, we have:

G = MA1 x MA2 x MA3 = 4 x 6 x 9 = 216

Substituting this value in the equation for slip, we get:

slip = 1 - (22 x 216) / 3600 ≈ 0.87

To know more about generator refer here

https://brainly.com/question/10736907#

#SPJ11

The actual frequency of the siren is approximately 568 Hz. The observed frequency is affected by the relative motion between the ambulance and the observer, resulting in a shift in the frequency known as the Doppler effect.

To calculate the actual frequency of the siren, we need to consider the Doppler effect formula:

[tex]f1 = f * (v + vo) / (v + vs)[/tex]

Where:

f1 is the observed frequency

f is the actual frequency

v is the speed of sound

vo is the velocity of the observer (positive for approaching, negative for receding)

vs is the velocity of the source (positive for receding, negative for approaching)

In this case, the ambulance is approaching the observer, so vo is positive and vs is negative. Plugging in the given values:

525 = f * (341 + 0) / (341 + 31.5)

Solving for f, we find that f is approximately 568 Hz. Therefore, the actual frequency of the siren is approximately 568 Hz.

Learn more about Doppler effect here

https://brainly.com/question/32206373

#SPJ11

σ = (2ε₀ * mg) / (q * sin(θ)) this is the surface charge density for the large charged nonconducting sheet.

To calculate the surface charge density for the sheet, we can use the concept of electrostatic equilibrium. The force on the charged sphere due to the electric field created by the sheet must be balanced by the weight of the sphere.

The force on the charged sphere is given by F = qE, where E is the electric field strength at the location of the sphere. The electric field at a distance r from a charged sheet with surface charge density σ is given by E = σ/2ε₀, where ε₀ is the permittivity of free space.

Therefore, the force on the sphere can be written as F = qσ/2ε₀. This force must be balanced by the weight of the sphere, which is given by W = mg, where g is the acceleration due to gravity.

We can use trigonometry to relate the weight of the sphere to the angle θ between the thread and the sheet. The component of the weight perpendicular to the sheet is given by mgcos(θ).

Setting F = W, we can solve for the surface charge density σ:

qσ/2ε₀ = mgcos(θ)

σ = 2ε₀mgcos(θ)/q

Therefore, the surface charge density for the sheet is given by σ = 2ε₀mgcos(θ)/q.
Hi! To calculate the surface charge density for the large charged nonconducting sheet, we can consider the forces acting on the small sphere, which are the gravitational force (F_g) and the electrostatic force (F_e). The equilibrium condition of the sphere is given by the angle θ.

The gravitational force is given by F_g = mg, where m is the mass of the sphere and g is the gravitational acceleration.

The electrostatic force is given by F_e = qE, where q is the charge of the sphere and E is the electric field due to the charged sheet.

In equilibrium, the forces are balanced in the vertical and horizontal directions. Therefore, we have:

1. F_g = mg = qE * sin(θ) (vertical component)
2. F_e * cos(θ) = qE * cos(θ) (horizontal component)

From (1), we can get the electric field E as:

E = mg / (q * sin(θ))

The electric field of an infinitely large charged nonconducting sheet is given by:

E = (σ / 2ε₀), where σ is the surface charge density and ε₀ is the vacuum permittivity.

Now, we can equate the expressions for E:

σ / (2ε₀) = mg / (q * sin(θ))

Solving for σ, we get:

σ = (2ε₀ * mg) / (q * sin(θ))

To know more about vacuum permittivity visit:-

https://brainly.com/question/29857641

#SPJ11

The angular acceleration of the fan is 0.969 rad/s²  and it takes 20.25 s for the fan to stop rotating.

To determine the angular acceleration of the fan, we need to use the formula:
angular acceleration = (final angular velocity - initial angular velocity) / time
Since the final angular velocity is 0 (the fan comes to a stop), and the initial angular velocity is 19 rad/s, we can substitute these values into the formula to get:
angular acceleration = (0 - 19 rad/s) / time
To find time, we need to use the fact that the fan rotates through an angle of 7.3 rad while slowing down. We can use the formula:
angle = (initial angular velocity x time) + (0.5 x angular acceleration x time²)
Substituting the given values, we get:
7.3 rad = (19 rad/s x time) + (0.5 x angular acceleration x time²)
Simplifying this equation, we get a quadratic equation:
0.5 x angular acceleration x time² + 19 rad/s x time - 7.3 rad = 0
Solving for time using the quadratic formula, we get:
time = (-19 rad/s ± sqrt((19 rad/s)² - 4 x 0.5 x (-7.3 rad) ) ) / (2 x 0.5 x angular acceleration)
time = (-19 rad/s ± sqrt(361.69 + 7.3) ) / angular acceleration
time = (-19 rad/s ± 19.6 ) / angular acceleration
We can ignore the negative root since time cannot be negative. So, we get:
time = (19.6 rad/s) / angular acceleration
Now, we can substitute this value of time into the equation for angular acceleration to get:
angular acceleration = -19 rad/s / ((19.6 rad/s) / angular acceleration)
Simplifying, we get:
angular acceleration = -0.969 rad/s²
Therefore, the angular acceleration of the fan is 0.969 rad/s² (magnitude only, since it's negative).
To find the time it takes for the fan to stop rotating, we can use the equation we derived earlier:
7.3 rad = (19 rad/s x time) + (0.5 x (-0.969 rad/s²) x time²)
Simplifying, we get another quadratic equation:
0.4845 x time² + 19 rad/s x time - 7.3 rad = 0
Solving for time using the quadratic formula, we get:
time = (-19 rad/s ± sqrt((19 rad/s)² - 4 x 0.4845 x (-7.3 rad) ) ) / (2 x 0.4845)
time = (-19 rad/s ± sqrt(361.69 + 14.1) ) / 0.969
We can ignore the negative root again, so we get:
time = (19.6 rad/s) / 0.969
time = 20.25 s
Therefore, it takes 20.25 s for the fan to stop rotating.

To know more about angular acceleration visit:

https://brainly.com/question/29428475

#SPJ11

It would take 144 calories of heat to raise the temperature of 10g of ice from -50ºC to -20ºC.

To calculate the amount of heat required to raise the temperature of 10g of ice from -50ºC to -20ºC, we need to use the formula Q = mcΔT, where Q is the amount of heat required, m is the mass of the substance, c is the specific heat, and ΔT is the change in temperature.
First, we need to determine the initial temperature of the ice, which is -50ºC. Then, we need to determine the change in temperature, which is ΔT = (-20ºC) - (-50ºC) = 30ºC.
Using the given specific heat of ice, which is 0.48 cal/gºC, we can plug in the values into the formula and solve for Q:
Q = (10g)(0.48 cal/gºC)(30ºC) = 144 cal
Therefore, it would take 144 calories of heat to raise the temperature of 10g of ice from -50ºC to -20ºC.

To know more about Specific Heat visit:
https://brainly.com/question/11297584
#SPJ11

The Turing machine for the language {w : |w| is a multiple of 4} can be constructed with four states, including an initial state, an accept state, and two additional states to count the number of symbols on the tape. The machine reads the input tape, and for every four symbols, it moves to the second counting state, and after completing the count, it moves back to the initial state to start counting again. If at any point during the counting process, the machine reads a symbol other than a or b, it enters a reject state and halts.

In more detail, the Turing machine starts in the initial state with the input tape head pointing to the leftmost symbol. It then reads each symbol on the tape, moving rightward and transitioning between the first counting state and the second counting state for every four symbols read. If the machine reaches the end of the tape and has counted a multiple of four symbols, it enters the accept state and halts. If it encounters a non-a/b symbol or reaches the end of the tape with a count that is not a multiple of four, it enters the reject state and halts.

Learn more about second here:

https://brainly.com/question/11879335

#SPJ11

A 0.25-kg ball to the floor from a height of 2.1 m  and it bounces to a height of 1.2 m. The magnitude of the change in its momentum as a result of the bounce is 2.387 Ns.

To find the magnitude of the change in momentum of the ball as a result of the bounce, we can use the principle of conservation of momentum. The momentum of an object is given by the product of its mass and velocity. Since the ball is dropped vertically and bounces back, we consider the change in momentum in the vertical direction.

Initially, when the ball is dropped, its velocity is purely downward, so the initial momentum is:

p_initial = m * v_initial

where m is the mass of the ball and v_initial is the initial velocity.

When the ball bounces back, its velocity changes direction and becomes purely upward. The final momentum is:

p_final = m * v_final

where v_final is the final velocity.

According to the principle of conservation of momentum, the change in momentum is:

Δp = p_final - p_initial

Substituting the given values:

m = 0.25 kg

v_initial = -√(2gh)   (negative because it is downward)

v_final = √(2gh)     (positive because it is upward)

h = 2.1 m (initial height)

h = 1.2 m (final height)

g = 9.8 m/s² (acceleration due to gravity)

v_initial = -√(2 * 9.8 * 2.1) ≈ -6.132 m/s

v_final = √(2 * 9.8 * 1.2) ≈ 3.416 m/s

Δp = (0.25 kg * 3.416 m/s) - (0.25 kg * -6.132 m/s)

=>Δp = 0.854 Ns + 1.533 Ns

=>Δp ≈ 2.387 Ns

The magnitude of the change in momentum is approximately 2.387 Ns.

Learn more about momentum at: https://brainly.com/question/1042017

#SPJ11

The period of the wave is 1.25 seconds.

The period of a wave is the time it takes for one complete cycle to occur. It is the reciprocal of the frequency, meaning that the period (T) is equal to 1 divided by the frequency (f).

Given that the frequency is 0.8 Hz, we can calculate the period as follows:

T = 1 / f

T = 1 / 0.8 Hz

T = 1.25 seconds

Therefore, the period of the wave is 1.25 seconds.

The question is '' What is the period of a wave if the frequency is 0.8 Hz''.

To know more about period here

https://brainly.com/question/14063174

#SPJ4

In Electrical Engineering, voltage across a capacitor in a circuit can be calculated using the formula V = Q/C, where V is the voltage, Q is the charge stored in the capacitor, and C is the capacitance of the capacitor.

To accurately determine the voltage across the capacitor in the given circuit, additional information such as capacitance, charge, or any other circuit components and their values would be required. Once you provide these details, I will be able to help you calculate the voltage across the capacitor in the circuit for your EG-EE203 Test#2 at California State University, Fullerton Department of Electrical Engineering.
To know more about Electrical Engineering visit:

https://brainly.com/question/31609731

#SPJ11

Answer:

If the slits are separated by d then s / d where s is the difference in the wave path between opposite sides of the slit

(a diagram would be useful here)

This can be expressed by:

sin θ = (λ / 2) / d      where θ  is the angle of diffraction

If d is the width of the slit then

d = λ / (2 sin θ) = 6.36E-7 / (.845) = 7.52E-7 m = 7.52E-5 cm

You can expect the use of these appliances to add about $85.41 to your electric bill each month.

To calculate the total cost of operation for your roommate's appliances, you need to know how much energy each appliance uses and for how long. Here are the appliances and their estimated energy consumption:

- Laptop (60 watts) used for 6 hours per day: 360 watt-hours (0.36 kWh) per day
- TV (150 watts) used for 4 hours per day: 600 watt-hours (0.6 kWh) per day
- Refrigerator (1500 watts) running 24 hours per day: 36,000 watt-hours (36 kWh) per day
- Microwave (1200 watts) used for 15 minutes per day: 300 watt-hours (0.3 kWh) per day

To find the total energy usage for the month, you need to multiply each appliance's daily energy consumption by the number of days in the month (28):

- Laptop: 0.36 kWh/day x 28 days = 10.08 kWh
- TV: 0.6 kWh/day x 28 days = 16.8 kWh
- Refrigerator: 36 kWh/day x 28 days = 1008 kWh
- Microwave: 0.3 kWh/day x 28 days = 8.4 kWh

Adding up all the energy usage for the month, you get a total of 1043.28 kWh. To find the cost of this energy, you need to multiply it by the cost per kWh from the utility company:

- 1043.28 kWh x $0.082/kWh = $85.41

Learn more about electric bill here :-

https://brainly.com/question/880765

#SPJ11

A gas whose pressure, volume and temperature are 275 kN/㎡, 0. 09m³ and 185°C, respectively, has its state changed at constant pressure until its temperature becomes 15 °C the heat transferred from the gas is equal to the change in internal energy:

Q = m * 1.005 kJ/kg K * (-170°C)

To determine the heat transferred from the gas and the work done on the gas during the process, we need to use the first law of thermodynamics, which states that the change in Internal energy of a system is equal to the heat added to the system minus the work done by the system.

The work done on the gas is given by:

W = P * ΔV

Where P is the pressure and ΔV is the change in volume.

Let’s calculate the heat transferred:

Q = m * Cp * ΔT

Q = m * 1.005 kJ/kg K * (15°C – 185°C)

Q = m * 1.005 kJ/kg K * (-170°C)

Next, let’s calculate the work done:

W = P * ΔV

W = 275 kN/m² * (0.09 m³ - 0.09 m³)

W = 0 kJ

Since the volume remains constant, no work is done on the gas.

Now, we can calculate the heat transferred:

ΔU = Q – W

ΔU = Q

Therefore, the heat transferred from the gas is equal to the change in internal energy:

Q = m * 1.005 kJ/kg K * (-170°C)

Learn more about  first law of thermodynamics here:

https://brainly.com/question/32101564

#SPJ11

The magnitude of the horizontal force acting on the sprinter is approximately 103.56 N.

To find the magnitude of the horizontal force acting on the sprinter, we first need to determine the acceleration. We can use the formula:

d = (1/2) * a * t^2

where d is the distance (63 m), a is the acceleration, and t is the time (8.78 s).

Rearranging for acceleration:

a = (2 * d) / t^2

Now we can plug in the values:

a = (2 * 63 m) / (8.78 s)^2
a ≈ 1.63 m/s^2

Now that we have the acceleration, we can find the horizontal force using Newton's second law:

F = m * a

where F is the force and m is the mass (63.51 kg).

F = 63.51 kg * 1.63 m/s^2
F ≈ 103.56 N

The magnitude of the horizontal force acting on the sprinter is approximately 103.56 N.

To learn more about mass, refer below:

https://brainly.com/question/19694949

#SPJ11

Answer:

The spacing between adjacent bright fringes in a double-slit experiment can be calculated using the formula:

y = (mλL) / d

where y is the spacing between adjacent bright fringes, m is the order of the fringe, λ is the wavelength of light, L is the distance between the slits and the screen, and d is the slit separation.

In this case, we have:

λ = 560 nm = 5.60 x 10^-7 m (converted to meters)

d = 0.025 mm = 2.50 x 10^-5 m (converted to meters)

L = 81 cm = 0.81 m (converted to meters)

Assuming we're looking at the central maximum, where m = 0, we can calculate the spacing between adjacent bright fringes as:

y = (0)(5.60 x 10^-7 m)(0.81 m) / (2.50 x 10^-5 m) = 0 m

However, this value doesn't make sense since the spacing between adjacent bright fringes should be non-zero. If we look at the first bright fringe (m = 1), we get:

y = (1)(5.60 x 10^-7 m)(0.81 m) / (2.50 x 10^-5 m) ≈ 1.84 x 10^-4 m

Therefore, the spacing between adjacent bright fringes is approximately 1.84 x 10^-4 meters.

learn more about bright fringes.

https://brainly.com/question/31315270?referrer=searchResults

#SPJ11

The magnitude of the force experienced by the passenger during this acceleration is 403 N.

To solve this problem, we need to use the formula for acceleration:
a = (vf - vi)/t
Where a is the acceleration, vf is the final velocity, vi is the initial velocity, and t is the time taken.
We can convert the final velocity to meters per second by dividing by 3.6:
vf = (1.00×102 km/h) / 3.6 = 27.8 m/s
The initial velocity is 0, so we can simplify the formula:
a = vf/t
a = 27.8 m/s / 4.27 s = 6.50 m/s^2
Now we can use the formula for force:
F = ma
Where F is the force, m is the mass of the passenger, and a is the acceleration we just calculated.
F = (62.0 kg) x (6.50 m/s^2) = 403 N
Therefore, the magnitude of the force experienced by the passenger during this acceleration is 403 N.

To know more about Force visit:
https://brainly.com/question/13191643
#SPJ11

The intensity at a distance that results in a surface area of 9.47 m is 0.625 W/m2. Option(d)

To calculate the weight of a sound wave at a distance, we can use the formula:

Intensity = Power / Area.

In this case, the public address system has a power output of 5.92 W and a surface area of ​​9.47 m².

Insert these values ​​into the formula:

Density = 5.

Calculating 92 kilos 9.47 kilos

these instructions, we see that

≈ uses 0.625 W/m².

Therefore, the intensity of the sound waves makes the area 9 at a certain distance.

47 m², approx. 0.625 W/m².

It is important to remember that density is defined as the strength of a field. In this case, it represents sound energy passing through a gap. The unit of use is watt/m2 (W/m²).

The answer given in the question is the correct value according to the calculation of 0.625 W/m². It represents the power of a sound wave over a distance.

The other answer options given by

(0, 355 W/m², 56.1 W/m² and 160 W/m²) do not match the calculation.

The correct answer is 0.625 W/m², which indicates suitable sound intensity away from public housing.  Option(d)

For more such questions on intensity

https://brainly.com/question/4431819

#SPJ11

The charge that moves through the laptop battery each second is 7.56 x 10¹⁹ electrons per second.

The charge moving through the battery each second can be calculated using the formula: charge = current x time. Since the current is given as 0.70 A, we can find the charge by multiplying it with the time (which is 1 second).

charge = current x time

charge = 0.70 A x 1 s

charge = 0.70 C/s

However, we can also express this value in terms of electrons per second by using the elementary charge (e = 1.6 x 10⁻¹⁹ C). Therefore, the charge can be written as:

charge = (0.70 C/s) / (1.6 x 10⁻¹⁹ C/e)

charge = 4.375 x 10¹⁸ e/s

Hence, the number of electrons that move through the battery each second is 7.56 x 10¹⁹ electrons per second (which is calculated by rounding off the above value to two significant figures).

learn more about CHARGE HERE:

https://brainly.com/question/31434870

#SPJ11

The circuit consisting of a battery connected to two resistors R₁ and R₂ in series with each other and a capacitor C connected across the resistors can be drawn like the attached diagram.

In the drawn circuit,

A battery with voltage V is connected to two resistors R₁ and R₂ in series with each other and a capacitor C is connected across the resistors.

The positive terminal of the battery is connected to one end of R₂ and one plate of the capacitor while the negative terminal is connected to one end of R₁ and other plate of the capacitor. The other ends of R₁ and R₂ are connected to each other.

The one plate of the capacitor is connected to the positive terminal and the other plate of the capacitor is connected to the negative terminal of the battery.

Learn more about circuits here

brainly.com/question/27206933

#SPJ4

Approximately 5.95 x [tex]10^1^8[/tex]neutrinos are produced in the Sun every second.

The number of neutrinos produced in the Sun every second can calculated by using  luminosity-flux equation:

L = 4πr²F

where L is the luminosity, r is the distance from the source (in this case, the Sun), and F is the flux.

Given that the flux at Earth's surface is approximately 70 billion solar neutrinos per square centimeter per second, we can substitute this value into the equation:

L = 4π(1 AU)²(70 billion neutrinos/cm²/s)

Note that 1 astronomical unit (AU) is the average distance from the Earth to the Sun, which is approximately 149.6 million kilometers or 93 million miles.

Now, we need to convert the area from square centimeters to square meters, which is 1 cm²= 0.0001 m²:

L = 4π(1 AU)²(70 billion neutrinos/cm²/s)(0.0001 m²/cm²)

Simplifying the equation:

L = 4π(1 AU)²(7 million neutrinos/m²/s)

Now we can calculate the number of neutrinos produced in the Sun every second by multiplying the luminosity (L) of the Sun by the flux (F) at Earth's surface:

Number of neutrinos produced in the Sun per second = L * F

Number of neutrinos produced in the Sun per second = 4π(1 AU)²(7 million neutrinos/m²/s) * (1.496 x [tex]10^1^1[/tex]meters)²

Calculating the expression:

Number of neutrinos produced in the Sun per second ≈ 5.95 x [tex]10^1^8[/tex]neutrinos

Therefore, approximately 5.95 x [tex]10^1^8[/tex] neutrinos are produced in the Sun every second.

Learn more about neutrinos

brainly.com/question/28098168

#SPJ11

Answer:

1 m/s (to the right)

Explanation:

[tex]mv_{1} + mv_{2} = m_{total}v_{final}\\\\10*5 + 5*(-7 )= (10+5)v_{final}\\ \\50 - 35 = 15*v_{final}\\\\v_{final}= 15 / 15 \\\\v_{final}=1 m/s[/tex]

Notice that we have a negative value for the velocity of the second cart. This is because the cart is moving to the left and we took right to be our positive direction. Velocity is a vector, so the direction matters. If we had taken left to be our positive direction, the answer would be v= - 1m/s which would still mean that the combination moves to the right.

Using only -vc, where v is the galaxy's speed and c is the speed of light, the speed of the galaxy would be given by -vc = zc, where z is the redshift of the galaxy. Solving for v, we get v = -z*c.

Therefore, if the redshift of the galaxy is z-1.3, then the speed of the galaxy would be v = -(z-1.3)*c = -1.3*c + z*c.

Since the redshift is greater than 1, this implies that the galaxy is moving away from us. The best explanation for a galaxy having a redshift with this value is that the expansion of the Universe causes light from the galaxy to change in wavelength.

As the Universe expands, the wavelength of light from distant galaxies gets stretched, causing a redshift. Therefore, the larger the redshift, the greater the distance of the galaxy from us, and the faster it is moving away from us due to the expansion of the Universe.

To know more about galaxy refer here

https://brainly.com/question/31361315#

#SPJ11