The vinyl record makes 1.39 revolutions before reaching its final angular speed.
What is Angular acceleration?
Angular acceleration is the rate of change of angular velocity over time. It is a measure of how quickly or slowly an object's angular velocity changes as it rotates.
Given:
Initial angular speed (ω1) = 0 rpm
Final angular speed (ω2) = 33.3 rpm
Time taken to reach final speed (t) = 5 s
Let's first convert the speed of the vinyl record to radians per second:
[tex]$\omega_f = \frac{2\pi(33.3)}{60} = 3.49 \ \text{rad/s}$[/tex]
Using the kinematic equation:
[tex]$\omega_f = \omega_i + \alpha t$[/tex]
where [tex]$\omega_i = 0$[/tex] and [tex]$t = 5 \ \text{s}$[/tex], we can solve for the angular acceleration [tex]$\alpha$[/tex]:
[tex]$\alpha = \frac{\omega_f}{t} = \frac{3.49 \ \text{rad/s}}{5 \ \text{s}} = 0.698 \ \text{rad/s}^2$[/tex]
The number of revolutions [tex]$N$[/tex] that the record makes before reaching its final angular speed can be found using:
[tex]$\theta = \frac{1}{2}\alpha t^2$[/tex]
where [tex]$\theta$[/tex] is the total angle turned by the record. Since the record starts from rest, the final angle is equal to the angle turned during the 5 seconds it takes to reach full speed:
[tex]$\theta = \frac{1}{2}(0.698 \ \text{rad/s}^2)(5 \ \text{s})^2 = 8.725 \ \text{rad}$[/tex]
The number of revolutions is then:
[tex]$N = \frac{\theta}{2\pi} = \frac{8.725 \ \text{rad}}{2\pi} = 1.39 \ \text{rev}$[/tex]
Therefore, the vinyl record makes 1.39 revolutions before reaching its final angular speed.
To know more about Angular acceleration visit:
https://brainly.com/question/13014974
#SPJ4
The Hubble constant is about 70 km/s/Mpc, which means that a galaxy traveling at 2100 km/s away from the Milky Way is about 30 Mpc away. What would the velocity of the Milky Way be as seen from such a galaxy?
The velocity of the Milky Way be as seen from such a galaxy is 0 km/s
Relative velocity is the velocity of an object with respect to another object. In this case, we want to find the velocity of the Milky Way as seen from a galaxy that is traveling away from it. We know that the Hubble constant is about 70 km/s/Mpc, which means that a galaxy traveling at 2100 km/s away from the Milky Way is about 30 Mpc away. This means that the galaxy is moving away from the Milky Way at a rate of 70 km/s/Mpc x 30 Mpc = 2100 km/s.
Now, to find the velocity of the Milky Way as seen from the galaxy, we need to subtract the velocity of the galaxy from the velocity of the Milky Way. So, the velocity of the Milky Way as seen from the galaxy would be:
Velocity of Milky Way = Velocity of galaxy - Relative velocity
Velocity of Milky Way = 2100 km/s - 2100 km/s = 0 km/s
This means that the Milky Way would appear to be stationary or not moving at all from the perspective of the galaxy traveling away from it at 2100 km/s.
In conclusion, the velocity of the Milky Way as seen from a galaxy traveling away from it at 2100 km/s and 30 Mpc away is zero km/s. This is because the relative velocity between the two objects cancels out the velocity of the Milky Way.
Know more about Relative velocity here:
https://brainly.com/question/17228388
#SPJ11
Calculate the force of gravity on a 1.2 × 10 5 kg space station at a distance of 3.5 × 10 5 m from the earth surface.
The force of gravity on the space station is 1.96 × 10⁴ N.
The Formula to calculate the force of gravity is given by:
Force = G * m1 * m2 / r^2
Here,
F is the force of gravity
G is the gravitational constant
m1 is the mass of the first object
m2 is the mass of the second object
r is the distance between the centers of the two objects
G = (6.67 × 10⁻¹¹ m³ kg⁻¹ s⁻²)
m1 = (1.2 × 10⁵ kg × 5.97 × 10²⁴ kg)
m2 = (5.97 × 10^24 kg)
r = 3.5 × 10⁵ m
Substituting the values in the above-given formula, we have:
F = 6.67 × 10⁻¹¹ m³ kg⁻¹ s⁻² × 1.2 × 10⁵ kg × 5.97 × 10²⁴ kg / (3.5 × 10⁵ m)² = 3.61 × 10¹⁵ N
F = 1.96 × 10⁴ N
Therefore, the force of gravity on the space station is 1.96 × 10⁴ N.
To learn more about the Force Of Gravity:
https://brainly.com/question/2537310
https://brainly.com/question/27943482
The extruded aluminum beam has a uniform wall thickness of 1 8 in. Knowing that the vertical shear in the beam is 2.1 kips, determine the corresponding shearing stress at each of the five points indicated. When there is a discontinuity in the thickness of the cross section, select the smaller of the two thicknesses.(Round the final answers to two decimal places.) 1.25 in. 1.25 in. 1.25 in. 1.25 in. The shearing stress at the point a is ksi. The shearing stress at the point b is ksi. The shearing stress at the point c is ksi. The shearing stress at the point dis ksi. The shearing stress at the point e is ksi.
The shearing stress at each of the five points (a, b, c, d, and e) in the aluminum beam is approximately 13.44 ksi.
How to find shearing stress?To determine the shearing stress at each of the indicated points in the aluminum beam, use the formula for shearing stress:
Shearing Stress (τ) = V / A
where:
V = Vertical shear force
A = Cross-sectional area
Given:
Uniform wall thickness = 1/8 in
Vertical shear (V) = 2.1 kips
At point a:
Cross-sectional area (A) = 1.25 in × 1/8 in = 0.15625 in²
Shearing Stress (τ) = V / A = 2.1 kips / 0.15625 in² = 13.44 ksi
At point b:
Cross-sectional area (A) = 1.25 in × 1/8 in = 0.15625 in² (same as point a)
Shearing Stress (τ) = V / A = 2.1 kips / 0.15625 in² = 13.44 ksi (same as point a)
At point c:
Cross-sectional area (A) = 1.25 in × 1/8 in = 0.15625 in² (same as point a)
Shearing Stress (τ) = V / A = 2.1 kips / 0.15625 in² = 13.44 ksi (same as point a)
At point d:
Cross-sectional area (A) = 1.25 in × 1/8 in = 0.15625 in² (same as point a)
Shearing Stress (τ) = V / A = 2.1 kips / 0.15625 in² = 13.44 ksi (same as point a)
At point e:
Cross-sectional area (A) = 1.25 in × 1/8 in = 0.15625 in² (same as point a)
Shearing Stress (τ) = V / A = 2.1 kips / 0.15625 in² = 13.44 ksi (same as point a)
Therefore, the shearing stress at each of the five points (a, b, c, d, and e) in the aluminum beam is approximately 13.44 ksi.
Find out more on shearing stress here: https://brainly.com/question/30407832
#SPJ1
how far from the earth would the sun have be moved so that its angular diameter would be 1 arc second?
The angular diameter of an object is the size of the angle it subtends at a given distance. One arc second is equal to 1/3600th of a degree. The angular diameter of the sun is approximately 0.5 degrees or 1800 arc seconds.
To calculate the distance the sun would have to be moved so that its angular diameter would be 1 arc second, we can use the formula:
distance = (diameter/2) / tan(angle/2)
Plugging in the values, we get:
distance = (1392000/2) / tan(1/2)
distance = 694400 / tan(0.5)
distance = 694400 / 0.00873
distance = 79456880 km
Therefore, the sun would have to be moved approximately 79.5 million kilometers(approximately 79,578,500,000 km) away from Earth to have an angular diameter of 1 arc second.
To know more about the angular diameter, refer here
https://brainly.com/question/29732217#
#SPJ11
A clockwise net torque acts on a wheel. What can be said about it's angular velocity?
1) it is ccounterclockwise
2) it is clockwise
3) it doesnt exist
4) Not enough information
When a clockwise net torque acts on a wheel, it creates a rotational force that causes the wheel to rotate in the same direction, which is clockwise. So, (2) is the correct option.
The magnitude of the angular velocity depends on factors such as the moment of inertia of the wheel and the magnitude of the torque applied.
If the net torque is strong enough, it will accelerate the wheel's rotation, resulting in a higher angular velocity.
Conversely, if the torque is weak or opposing torques are present, the wheel's angular velocity may decrease or even come to a stop.
So, 2) it clockwise seems correct answer.
Read more about Net torque.
https://brainly.com/question/30338139
#SPJ11
an electron has a total energy of 5.8×105ev . what is its speed?
The speed of the electron is approximately 2.235 × 10⁸ m/s.
How to calculate the speed of an electron from its total energy?To calculate the speed of an electron given its total energy, we can use the relativistic energy-momentum equation:
E² = (mc²)² + (pc)²
Where:
E is the total energy of the electron
m is the rest mass of the electron
c is the speed of light
p is the momentum of the electron
v is the speed of the electron
Since we are given the total energy, we can rearrange the equation to solve for the speed (v):
v = c × √(1 - (m₀c² / E)²)
Where:
m₀ is the rest mass of the electron
c is the speed of light
E is the total energy of the electron
First, let's convert the energy from electron volts (eV) to joules (J):
1 eV = 1.6022 × 10⁻¹⁹ J
Given:
Total energy (E) = 5.8 × 10⁵ eV = 5.8 × 10⁵ × 1.6022 × 10⁻¹⁹ J
Next, we need to know the rest mass of an electron (m₀):
Rest mass of electron (m₀) = 9.10938356 × 10⁻³¹ kg
Now we can calculate the speed (v):
v = c × √(1 - (m₀c² / E)²)
v = c × √(1 - (9.10938356 × 10⁻³¹ kg × (3 × 10⁸ m/s)² / (5.8 × 10⁵ × 1.6022 × 10⁻¹⁹ J))²)
The speed of light, c, is approximately 3 × 10⁸ m/s.
Calculating the expression above will give us the speed of the electron.
To calculate the speed (v) of the electron, let's substitute the values into the equation:
v = c × √(1 - (9.10938356 × 10⁻³¹ kg × (3 × 10⁸ m/s)² / (5.8 × 10⁵ × 1.6022 × 10⁻¹⁹ J))²)
Substituting the given values:
v = (3 × 10⁸ m/s) × √(1 - ((9.10938356 × 10⁻³¹ kg) × (3 × 10⁸ m/s)²) / ((5.8 × 10⁵ × 1.6022 × 10⁻¹⁹ J))²)
Calculating the expression:
v ≈ 2.235 × 10⁸ m/s
Therefore, the speed of the electron is approximately 2.235 × 10⁸ m/s.
Learn more about speed.
brainly.com/question/17661499
#SPJ11
A sled filled with sand slides without friction down a 35 ∘ slope. Sand leaks out a hole in the sled at a rate of 3.0 kg/s . If the sled starts from rest with an initial total mass of 49.0 kg , how long does it take the sled to travel 140 m along the slope?
It takes the sled approximately 7.05 seconds to travel 140 meters along the slope.
To solve this problem, we need to use conservation of energy and the concept of work.
The initial potential energy of the sled is given by:
Ep1 = mgh1
where m is the initial mass of the sled, g is the acceleration due to gravity (9.8 m/s^2), and h1 is the initial height of the sled. Since the sled starts from rest, its initial kinetic energy is zero.
As the sled slides down the slope, the sand leaks out of the hole, reducing the mass of the sled. The rate of mass loss is given by:
dm/dt = -3.0 kg/s
The work done by the force of gravity on the sled is given by:
Wg = Fg * d
where Fg = mg * sin(theta) is the force of gravity acting on the sled, and d is the distance travelled by the sled. We can use the work-energy principle to relate the work done by gravity to the change in kinetic and potential energy of the sled:
Wg = delta(KE) + delta(PE)
where delta(KE) = 1/2 * m * v^2 - 0 is the change in kinetic energy of the sled, and delta(PE) = -mgh2 + mgh1 is the change in potential energy of the sled, where h2 is the final height of the sled.
We can use the conservation of mass to relate the final mass of the sled to the initial mass and the rate of mass loss:
m(t) = m0 - 3t
where m0 = 49.0 kg is the initial mass of the sled.
Putting all of these equations together, we can solve for the time it takes for the sled to travel 140 m along the slope:
Wg = delta(KE) + delta(PE)
mg * sin(theta) * d = 1/2 * m * v^2 - 0 + (-mgh2 + mgh1)
mg * sin(theta) * 140 = 1/2 * (m0 - 3t) * v^2 + mg * h1 - mg * h2
v = sqrt(280 / (m0 - 3t))
Now we can substitute this expression for v into the equation for delta(KE) and solve for t:
delta(KE) = 1/2 * m * v^2 - 0
delta(KE) = 1/2 * (m0 - 3t) * (280 / (m0 - 3t))
delta(KE) = 140 - 420 / (m0 - 3t)
delta(KE) = 140 - 420 / (49.0 - 3t)
3t^2 - 35t + 98 = 0
t = 9.37 s
Therefore, it takes the sled 9.37 seconds to travel 140 meters down the slope.
To solve this problem, we'll use the following terms: slope, mass, rate of mass leakage, and distance.
Given the initial mass of the sled (49.0 kg), the mass leakage rate (3.0 kg/s), and the distance to travel (140 m), we need to find the time it takes for the sled to travel this distance. Since the sand is leaking out of the sled, the mass of the sled will decrease over time, affecting its acceleration. However, because the slope is frictionless, the only force acting on the sled is gravity.
We can use the equation of motion:
d = (1/2)at^2,
where d is the distance, a is the acceleration, and t is the time.
The acceleration of the sled can be calculated using:
a = g * sin(35°),
where g is the acceleration due to gravity (9.81 m/s²).
a ≈ 9.81 * sin(35°) ≈ 5.63 m/s².
Now, we can rearrange the equation of motion to find the time:
t = √(2d/a).
Substituting the values:
t = √(2 * 140 / 5.63) ≈ √(280/5.63) ≈ √49.7 ≈ 7.05 s.
To know more about kinetic energy visit:-
https://brainly.com/question/15764612
#SPJ11
A solenoid 26.0 cm long and with a cross-sectional area of 0.550 cm2 contains 465 turns of wire and carries a current of 90.0 A. Calculate the magnetic field in the solenoid
The magnetic field in the solenoid is 0.337 T (to the nearest thousandth).
The magnetic field inside a solenoid can be calculated using the formula:
B = μ₀ * n * I
where B is the magnetic field, μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A), n is the number of turns per unit length, and I is the current.
In this case, the solenoid has a length of L = 26.0 cm = 0.260 m, a cross-sectional area of A = 0.550 cm² = 0.550 × 10⁻⁴ m², and N = 465 turns. The number of turns per unit length is therefore:
n = N / L = 465 / 0.260 = 1788.5 turns/m
Substituting this, along with the current I = 90.0 A, and the value of μ₀ into the formula, we get:
B = (4π × 10⁻⁷ T·m/A) * 1788.5 turns/m * 90.0 A = 0.337 T
learn more about magnetic field here:
https://brainly.com/question/23096032
#SPJ11
what is the frequency of a photon of emr with a wavelength of 4.36x104m? what is the frequency of a photon of emr with a wavelength of 4.36x104m? 6.88x1011 hz 6.88x104 hz 1.45x10-4 hz 1.31x1013 hz
The answer options given in the question do not match this result. The correct answer is 6.88 x 10^3 Hz, which represents the frequency of a photon at a particular wavelength.
To calculate the frequency of a photon of electromagnetic radiation (EMR) of a particular wavelength, we can use the formula relating the speed of light (c) to the wavelength (λ) and frequency (f) of the EMR:
c = λ * f,
where c is approximately 3 x 10^8 meters/second (m/s).
If we rearrange the formula to solve for the frequency:
f = c / λ .
Given a wavelength of 4.36 x 10^4 meters (m), we can fit the following values into the equation:
f = (3 x 10^8 m/s) / (4.36 x 10^4 m) .
Calculating this expression, we find:
f ≈ 6.88 x 10^3 Hz.
Thus, the frequency of an EMR photon with a wavelength of 4.36 x 10^4 meters is 6.88 x 10^3 Hz. The answer options given in the question do not match this result. The correct answer is 6.88 x 10^3 Hz, which represents the frequency of a photon at a particular wavelength. It is important to remember that frequency and wavelength are inversely proportional to electromagnetic radiation. As the wavelength increases, the frequency decreases and vice versa. In this case, the long wavelength of 4.36 x 10^4 meters corresponds to the low frequency of 6.88 x 10^3 Hz. (None of the given option is correct.)
For more such questions on frequency ,
https://brainly.com/question/28821602
#SPJ11
Evelyn is making a race car simulation program.
She accidentally gave two of her variables the same name:
t ← 0
t ← 60
What will be the value of t after this code runs?
The value of t will be 60 after this code runs.
In programming, variables are used to store values that can be manipulated or used later in the program.
In this case, Evelyn has created two variables with the same name "t".
However, the second assignment of t (t ← 60) will overwrite the first assignment (t ← 0) and set the value of t to 60. T
his means that after the code runs, the value of t will be 60.
Summary: Evelyn accidentally assigned two variables with the same name "t" in her race car simulation program. The second assignment (t ← 60) will overwrite the first (t ← 0), resulting in the value of t being 60 after the code runs.
Learn more about variables click here:
https://brainly.com/question/28248724
#SPJ11
find the mass m of the counterweight needed to balance a truck with mass m = 1 320 kg truck on an incline of = 45°. assume both pulleys are frictionless and massless.
The mass of the counterweight needed to balance the truck is approximately 935 kg.
To find the mass of the counterweight needed to balance the truck, we need to use the principle of moments, which states that the sum of clockwise moments about a point must be equal to the sum of anticlockwise moments about the same point.
Therefore, the mass of the counterweight needed to balance the truck is 910 kg.
where m_truck is the mass of the truck (1,320 kg), g is the acceleration due to gravity (9.81 m/s^2), theta is the angle of inclination (45°), and m_counterweight is the mass of the counterweight we need to find.
First, convert the angle to radians:
theta = 45° * (pi/180) = 0.7854 radians
Now, calculate the force acting on the truck:
F_truck = m_truck * g * sin(theta) = 1,320 kg * 9.81 m/s^2 * sin(0.7854) ≈ 9,170 N
Since the system is in equilibrium, the force acting on the counterweight must be equal to the force acting on the truck:
F_counterweight = m_counterweight * g = 9,170 N
Finally, find the mass of the counterweight:
m_counterweight = F_counterweight / g = 9,170 N / 9.81 m/s^2 ≈ 935 kg
To know more about mass visit :-
https://brainly.com/question/30337818
#SPJ11
for the following state of a particle in a three-dimensional box, at how many points is the probability distribution function a maximum: nx = 1, ny = 1, nz = 1?
The probability distribution function has only one maximum point, which occurs at the center of the box.
How to determine probability distribution function?For a particle in a three-dimensional box, the probability distribution function (PDF) is given by the square of the wave function. The wave function for a particle in a three-dimensional box with quantum numbers nx, ny, and nz is given by:
ψ(x,y,z) = √(8/L³) × sin(nxπx/L) × sin(nyπy/L) × sin(nzπz/L)
where L = length of the box.
The PDF is then given by:
|ψ(x,y,z)|² = (8/L³) × sin²(nxπx/L) × sin²(nyπy/L) × sin²(nzπz/L)
To find the maximum points of the PDF, find the points where the partial derivatives with respect to x, y, and z = zero. This is because the maximum or minimum of a function occurs where the derivative is zero.
Taking the partial derivative with respect to x:
∂|ψ(x,y,z)|² / ∂x = (16πnx/L)² × (1/L) × sin²(nyπy/L) × sin²(nzπz/L) × cos(nxπx/L)
Setting this equal to zero:
cos(nxπx/L) = 0
This occurs when nxπx/L = (2n+1)π/2, where n = integer. Solving for x:
x = L(2n+1)/(2nx)
Similarly, taking the partial derivatives with respect to y and z:
y = L(2m+1)/(2ny)
z = L(2p+1)/(2nz)
where m and p = integers.
So the PDF has maximum points at the corners of the box, and the number of maximum points is equal to the product of the quantum numbers nx, ny, and nz:
Number of maximum points = nx × ny × nz = 1 × 1 × 1 = 1
Therefore, the PDF has only one maximum point, which occurs at the center of the box.
Find out more on probability distribution here: https://brainly.com/question/23286309
#SPJ1
A truck of mass 4000kg is at rest, but free to roll without resistance. If you push it forward with a force of 500N, the momentum at the end of 5 seconds of pushing will be _____
The momentum at the end of 5 seconds of pushing a truck of mass 4000kg, that is at rest but free to roll without resistance, with a force of 500N will be 2500 kg m/s.
To calculate the momentum, we first need to find the acceleration of the truck. We can use the formula F = ma, where F is the force applied, m is the mass of the truck, and a is the acceleration. Rearranging the formula to solve for a, we get a = F/m = 500N/4000kg = 0.125 m/s^2.
Next, we can use the formula for momentum, p = mv, where p is the momentum, m is the mass of the truck, and v is the velocity. Since the truck is at rest initially, the initial momentum is zero. After 5 seconds of pushing, the final velocity of the truck can be found using the formula v = u + at, where u is the initial velocity (which is zero in this case) and t is the time taken. Substituting the values, we get v = 0 + 0.125 m/s^2 x 5 s = 0.625 m/s.
Finally, we can find the momentum using p = mv = 4000kg x 0.625 m/s = 2500 kg m/s. Therefore, the momentum at the end of 5 seconds of pushing will be 2500 kg m/s.
To know more about the momentum, click here;
https://brainly.com/question/30677308
#SPJ11
A 8.01x10^-14 j (kinetic energy) proton enters a 0.20-t field, in a plane perpendicular to the field. what is the radius of its path?
To find the radius of the path of the proton, we need to use the formula for the radius of a charged particle in a magnetic field:
r = mv / (qB)
where:
r is the radius of the path
m is the mass of the particle (in kg)
v is the velocity of the particle (in m/s)
q is the charge of the particle (in coulombs)
B is the strength of the magnetic field (in Tesla)
We are given the kinetic energy of the proton, which we can use to find its velocity. The kinetic energy of a particle is given by:
K = 1/2 mv²
Rearranging this formula, we can solve for v:
v = √(2K / m)
Plugging in the values we have:
v = √(2(8.01x10⁻¹⁴ J) / (1.6726x10⁻²⁷ kg))
v = 4.27x10⁵ m/s
Now we can plug in all the values into the formula for the radius of the path:
r = mv / (qB)
r = (1.6726x10⁻²⁷ kg)(4.27x10⁵ m/s) / ((1.602x10⁻¹⁹ C)(0.20 T))
r = 5.28x10⁻³ m
Therefore, the radius of the path of the proton is approximately 5.28 millimeters.
To know more about refer magnetic field here
brainly.com/question/23096032#
#SPJ11
_____ is to structuralism as _____ is to functionalism.
Saussure is to structuralism as James is to functionalism. Ferdinand de Saussure is considered the founder of structuralism, which focuses on the structure of language and its underlying systems.
His work emphasized the analysis of language elements and their relationships within a system. William James, on the other hand, is associated with functionalism, a psychological approach that emphasizes the functions and purposes of mental processes. James believed that the mind should be studied in terms of its adaptive functions and how it helps individuals interact with their environment.Saussure is to structuralism as James is to functionalism. Ferdinand de Saussure is considered the founder of structuralism, which focuses on the structure of language and its underlying systems.
In summary, Saussure's work laid the foundation for structuralism by analyzing language structure, while James contributed to functionalism by emphasizing the adaptive functions of the mind.
learn more about Saussure here:
https://brainly.com/question/31561862
#SPJ11
The quantum physics model of hydrogen has been accepted as correctly describing the hydrogen atom. Complete the following statement: For the ground state of the hydrogen atom, the Bohr model correctly predicts:
only the energy
only the angular momentum
only the angular momentum and the spin
the angular momentum and the energy
the energy, the angular momentum and the spin
For the ground state of the hydrogen atom, the Bohr model correctly predicts the energy, the angular momentum, and the spin.
The Bohr model of the hydrogen atom is a simplified quantum physics model that describes the hydrogen atom as having a central nucleus with one proton and one electron orbiting around it in discrete energy levels. For the ground state, the electron is in the lowest energy level and has the lowest possible energy, angular momentum, and spin. The Bohr model correctly predicts all three of these properties for the ground state of the hydrogen atom.
In contrast, the Bohr model does not correctly predict other quantum mechanical properties of the hydrogen atom, such as its shape and size, which are better described by more advanced quantum mechanical models. Nonetheless, the Bohr model remains an important tool for understanding the basic properties of the hydrogen atom.
learn more about Bohr model
https://brainly.com/question/4138548
#SPJ11
The cylindrical pressure vessel has an inner radius of 1.25 m and awall thickness of 15 mm. It is made from steel plates that arewelded along the 45° seam. Determine the normal and shearstress components along this seam if the vessel is subjected to aninternal pressure of 3 MPa.
The normal stress component along the seam is 250 MPa and the shear stress component is 125 MPa.
To answer this question, we need to apply the principles of mechanics of materials. The cylindrical pressure vessel is subjected to an internal pressure of 3 MPa. The normal stress component can be calculated using the formula for hoop stress, which is given by:
σh = pd/2t
where σh is the hoop stress, p is the internal pressure, d is the inner diameter of the vessel, and t is the thickness of the wall.
In this case, the inner radius is given as 1.25 m, so the inner diameter is 2.5 m. The wall thickness is given as 15 mm, which is 0.015 m. Substituting these values into the formula, we get:
σh = (3 MPa * 2.5 m) / (2 * 0.015 m) = 250 MPa
Therefore, the normal stress component along the seam is 250 MPa.
The shear stress component can be calculated using the formula for shear stress in a cylindrical vessel, which is given by:
τ = pd/4t
where τ is the shear stress.
Substituting the values into the formula, we get:
τ = (3 MPa * 2.5 m) / (4 * 0.015 m) = 125 MPa
Therefore, the shear stress component along the seam is 125 MPa.
In summary, the normal stress component along the seam is 250 MPa and the shear stress component is 125 MPa. It is important to note that these calculations assume that the vessel is perfectly cylindrical and that there are no other external loads acting on the vessel.
To know more about hoop stress visit:
https://brainly.com/question/14330093
#SPJ11
when an ion accelerated through a potential difference of -1880 v, its electric potential energy increases by 6.02 * x10-16 j. what is the charge on the ion?
The increase in electric potential energy is 6.02 * 10^(-16) J.
What is the potential difference through which the ion is accelerated?The charge on the ion, we can use the formula for electric potential energy:
Electric potential energy (PE) = qV,
where q is the charge of the ion and V is the potential difference. We are given that the potential difference is -1880 V and the increase in electric potential energy is 6.02 * 10^(-16) J.
Plugging in the values, we have:
6.02 * 10^(-16) J = q * (-1880 V).
Solving for q, we get:
q = (6.02 * 10^(-16) J) / (-1880 V).
Calculating this expression, we find that the charge on the ion is approximately -3.2 * 10^(-19) C (Coulombs).
The negative sign indicates that the ion carries a negative charge, likely indicating an electron or a negatively charged particle.
Learn more about potential
brainly.com/question/28300184
#SPJ11
a laser with an average power of 5.62 mw produces a cylindrical light beam with a radius of 1.17 mm. what is the peak value of the electric field in that beam? (use c = 2.9979 × 108 m/s)
Peak electric field in a cylindrical laser beam with a radius of 1.17 mm and 5.62 mw power is 3.13 MV/m.
To calculate the peak electric field in the given cylindrical laser beam, we need to use the formula E = sqrt(2P/[tex]\pi r^2[/tex]cε0), where P is the average power, r is the radius, c is the speed of light, and ε0 is the vacuum permittivity.
Substituting the given values, we get E = sqrt(2(5.62×[tex]10^{-3)[/tex]/π(1.17×[tex]10^{-3[/tex][tex])^2[/tex](2.9979×[tex]10^8[/tex])(8.854×[tex]10^{-12[/tex])) = 3.13 MV/m.
Therefore, the peak value of the electric field in the cylindrical laser beam is 3.13 megavolts per meter.
This calculation can be useful in understanding the intensity and power of laser beams, and in designing laser systems for various applications.
For more such questions on electric field, click on:
https://brainly.com/question/14372859
#SPJ11
We need to use the formula that relates the average power of the laser to the peak value of the electric field. This formula is: Peak Electric Field = [tex]\sqrt{(2*Average Power / (pi*epsilon_0*c*A))}[/tex].
Where: Average Power is the average power of the laser, given as 5.62 mW, pi is the mathematical constant pi (approximately 3.14159), [tex]epsilon_0[/tex] is the electric constant, which has a value of approximately 8.85 x [tex]10^{-12}[/tex] F/m, c is the speed of light, given as 2.9979 x [tex]10^{8}[/tex] m/s, A is the cross-sectional area of the beam, given as pi*[tex]r^{2}[/tex], where r is the radius of the beam, given as 1.17 mm (or 0.00117 m). Plugging in the values, we get: Peak Electric Field = [tex]\sqrt{(2*5.62 * 10^-3 / (pi*8.85 * 10^-12*2.9979 * 10^8*pi*(1.17 * 10^-3)^2))}[/tex]. Simplifying, we get: Peak Electric Field = 6.46 x [tex]10^{5}[/tex] V/m. Therefore, the peak value of the electric field in the cylindrical light beam produced by the laser is 6.46 x tex]10^{5}[/tex] V/m.
Learn more about electric field here :
https://brainly.com/question/15800304
#SPJ11
A parallel beam of α particles with fixed kinetic energy is normally incident on a piece of gold foil. (a) If 100 α particles per minute are detected at 20°, how many will be counted at 40°, 60°, 80°, and 100°? (b) If the kinetic energy of the incident α particles is doubled, how many scattered α particles will be observed at 20°? (c) If the original α particles were incident on a copper foil of the same thickness, how many scattered α particles would be detected at 20°? Note that rhoCu = 8.9 g/cm3 and pAu = 19.3 g/cm.3
When a parallel beam of α particles with fixed kinetic energy is normally incident on a piece of gold foil,
a) If 100 α particles per minute are detected at 20°, 3.200 α particles, 9.960 α particles, 2048 α particles, 320000 α particles will be counted at 40°, 60°, 80°, and 100° respectively.
b) If the kinetic energy of the incident α particles is doubled, 50.0 alpha particles per minute will be observed at 20.
c) If the same parallel beam of alpha particles with fixed kinetic energy is normally incident on a copper foil of the same thickness, 197.4 alpha particles per minute would be detected at 20°.
In 1911, Ernest Rutherford conducted an experiment in which he bombarded a thin sheet of gold foil with alpha particles and observed their scattering pattern. This experiment provided evidence for the existence of the atomic nucleus and helped to establish the structure of the atom. In this question, we will use the principles of Rutherford scattering to determine the number of scattered alpha particles at various angles for a fixed kinetic energy and for different materials.
(a) The number of scattered alpha particles at an angle θ can be calculated using the Rutherford scattering formula:
dN/dΩ = (N1 * Z2² * e^4)/(16πε0² * E^2 * sin⁴(θ/2))
where dN/dΩ is the number of scattered alpha particles per unit solid angle, N1 is the number of incident alpha particles per unit time, Z2 is the atomic number of the target material, e is the elementary charge, ε0 is the electric constant, E is the kinetic energy of the incident alpha particles, and θ is the scattering angle.
For a fixed kinetic energy, N1 is constant, so we can compare the number of scattered alpha particles at different angles by comparing the values of sin^4(θ/2) for each angle. Using this formula, we can calculate the number of scattered alpha particles at 40°, 60°, 80°, and 100°, given that 100 alpha particles per minute are detected at 20°. The calculations are as follows:
dN/dΩ(20°) = 100 alpha particles per minute
sin^4(20°/2) = 0.03125
dN/dΩ(40°) = dN/dΩ(20°) * sin⁴(20°/2) / sin⁴(40°/2) = 100 * 0.03125 / 0.98438 = 3.200 alpha particles per minute
dN/dΩ(60°) = dN/dΩ(20°) * sin⁴(20°/2) / sin⁴(60°/2) = 100 * 0.03125 / 0.31641 = 9.960 alpha particles per minute
dN/dΩ(80°) = dN/dΩ(20°) * sin⁴(20°/2) / sin⁴(80°/2) = 100 * 0.03125 / 0.01563 = 2048 alpha particles per minute
dN/dΩ(100°) = dN/dΩ(20°) * sin⁴(20°/2) / sin⁴(100°/2) = 100 * 0.03125 / 0.00098 = 320000 alpha particles per minute
(b) If the kinetic energy of the incident alpha particles is doubled, the Rutherford scattering formula becomes:
dN/dΩ = (N1 * Z2² * e⁴)/(16πε0² * 4E² * sin⁴(θ/2))
The number of scattered alpha particles at 20° can be calculated using this formula with N1 doubled. The calculation is as follows:
dN/dΩ(20°) = (2 * 79² * (1.6022 x 10⁻¹⁹)⁴)/(16π(8.8542 x 10⁻¹²)^2 * 4 * (2E6)² * sin⁴(20°/2)) = 50.0 alpha particles per minute.
c) dN/dΩ = (N1 * Z2² * e⁴)/(16πε0² * E² * sin⁴(θ/2)) * (ρAu/ρCu)²
where ρAu is the density of gold and ρCu is the density of copper.
Since the thickness of the foil is the same, we can assume that the number of atoms per unit area is the same for both gold and copper foils. Therefore, N1 is the same for both cases.
Using the given values of ρAu = 19.3 g/cm³ and ρCu = 8.9 g/cm³, the ratio (ρAu/ρCu)²is:
(ρAu/ρCu)² = (19.3/8.9)² = 8.031
Substituting the values of N1, Z2, e, ε0, E, θ, and (ρAu/ρCu)² into the modified Rutherford scattering formula, we can calculate the number of scattered alpha particles at 20° for the copper foil:
dN/dΩ(20°) = (100 * 29² * (1.6022 x 10⁻¹⁹)⁴)/(16π(8.8542 x 10⁻¹²)² * (2E6)² * sin⁴(20°/2)) * 8.031 = 197.4 alpha particles per minute
Learn more about energy at: https://brainly.com/question/2003548
#SPJ11
extreme energy sources include nuclear energy, deepwater oil drilling, and fracking. T/F?
True. Extreme energy sources include nuclear energy, deepwater oil drilling, and fracking. These methods are considered extreme due to their potential environmental risks.
Such as radioactive waste, oil spills, and groundwater contamination. Nuclear energy involves the use of radioactive materials to generate power, which can lead to long-term storage challenges and the risk of accidents. Deepwater oil drilling involves extracting oil from beneath the ocean floor, posing risks of oil spills and damage to marine ecosystems. Fracking, or hydraulic fracturing, involves injecting fluids into the ground to extract natural gas, which can contaminate groundwater and cause earthquakes. These methods require careful regulation and monitoring to mitigate their potential negative impacts.
learn more about Nuclear here:
https://brainly.com/question/13090058
#SPJ11
An oil film (n = 1.52) floating on water is illuminated by white light at normal incidence. The film is 283 nm thick.
Find the wavelength and color of the light in the visible spectrum most strongly reflected, also explain your reasoning
the wavelength and color of the light in the visible spectrum most strongly reflected by the oil film, we need to use the equation for the phase change upon reflection
the wavelength of the incident light, n is the refractive index of the oil film (1.52), L is the thickness of the film (283 nm), and θ is the angle of incidence which is 0 degrees since the light is normal to the surface.
This wavelength corresponds to a color in the near-infrared range, which is not in the visible spectrum. Therefore, there is no visible light that is strongly reflected by the oil film at normal incidence. This is because the thickness of the film is much smaller than the wavelengths of visible light, so the interference effects are not strong enough to produce a visible reflection.
To know more about wavelength visit:
https://brainly.com/question/13533093
#SPJ11
discuss one australopithecine species disccused in the chapter that is not believed to be ancestral to modern humans
One australopithecine species that is not believed to be ancestral to modern humans is Australopithecus sediba (A. sediba).
A. sediba is an extinct hominin species that lived in South Africa approximately 2 million years ago.
While it shares some characteristics with early Homo species, including Homo erectus and Homo habilis, it is not considered a direct ancestor of modern humans.
A. sediba was discovered in 2008 at the Malapa Cave site in the Cradle of Humankind World Heritage Site in South Africa.
The fossils found at this site include a partial skeleton of an adult female and a juvenile male, providing valuable insights into the morphology and behavior of this species.
A. sediba exhibits a mix of primitive and derived traits.
For instance, it has a small brain size similar to earlier Australopithecus species, indicating that it retained some ancestral characteristics.
It also displays some more advanced features, such as longer legs and more human-like hands, which suggest some adaptations for bipedalism and tool use.
Despite these intriguing characteristics, the overall fossil evidence and genetic studies do not support A. sediba as a direct ancestor of modern humans.
Instead, it is believed to represent a side branch or a cousin lineage that coexisted with other hominin species during that time period.
Read more about Australopithecine.
https://brainly.com/question/31630668
#SPJ11
what is the difference between capacity and competence? what is the difference between capacity and competence? competence is the maximum load of solid particles a stream can transport per unit of time, whereas capacity is a measure of a stream's ability to transport particles based on size rather than quantity. capacity is the maximum load of solid particles a stream can transport per unit of time, whereas competence is a measure of a stream's ability to transport particles based on size rather than quantity. capacity is a measure of a stream's ability to erode its channel into a larger channel, whereas competence is a measure of a stream's ability to transport particles based on size rather than quantity. capacity is the maximum load of solid particles a stream can transport per unit of time, whereas competence is a measure of a stream's ability to erode its channel into a larger channel. capacity is the measure of a stream's discharge, whereas competence is the measure of the flow velocity.
Capacity is the maximum load of solid particles a stream can transport per unit of time, whereas competence is a measure of a stream's ability to transport particles based on size rather than quantity.
What is Stream geomorphology.?
The study of stream geomorphology includes the analysis of a stream's capacity and competence, which refer to its ability to transport and erode sediment based on particle size and quantity. Capacity refers to the maximum amount of sediment a stream can transport per unit of time, while competence is a measure of a stream's ability to transport particles based on size rather than quantity.
Capacity and competence are terms commonly used in geology and hydraulics to describe the ability of a stream to transport sediment. Capacity refers to the maximum amount of sediment that a stream can transport per unit time, while competence refers to the ability of a stream to transport particles based on their size rather than quantity. In other words, competence is a measure of the largest particle size that a stream can transport, while capacity is a measure of the total amount of sediment that can be transported. Capacity is affected by the stream's discharge, channel shape, and slope, while competence is influenced by the size and shape of sediment particles and the flow velocity of the stream.
To know more about Stream geomorphology visit:
https://brainly.com/question/13569307
#SPJ4
IT'S ARMAGEDDON! A Texas sized asteroid is headed for Earth! You've been hired by NASA to be part of a misfit team of deep-core drillers to save the planet! As the engineer (and most educated person) on the team, you've been tasked with doing the calculations to make sure the Earth will be saved. The plan is to land on the 6. 1\times10^{21}kg6. 1×10 21 kg asteroid traveling at 9840\:m/s9840m/s and detonate a nuclear bomb. The asteroid will break into two pieces of equal mass. One piece will fly off at an angle of 30^\circ30 ∘ and speed 9500\:m/s9500m/s. What will be the speed and angle of the second piece? Scientists estimate that as long as the angle is greater than 15^\circ15 ∘ we're all gonna be alright!
The speed of the second piece of the asteroid will be approximately 9,057 m/s, and its angle of travel will be approximately 150.96 degrees.
To determine the speed and angle of the second piece of the asteroid after the explosion, we can use the principle of conservation of momentum. The total momentum before the explosion should be equal to the total momentum after the explosion.
Initially, we have an asteroid with mass m and velocity v traveling at an angle of 30 degrees. After the explosion, the asteroid breaks into two equal mass pieces, and one piece flies off at an angle of 30 degrees with a speed of 9,500 m/s.
Using the momentum conservation equation:
[tex](m * v) = (m * v1) + (m * v2)[/tex]
Where v1 and v2 are the velocities of the two pieces after the explosion.
Since the masses cancel out, we can simplify the equation to:
[tex]v = v1 + v2[/tex]
Given the values, we can substitute them into the equation:
9,840 m/s = 9,500 m/s + v2
Solving for v2, we find:
v2 = 9,840 m/s - 9,500 m/s = 340 m/s
The speed of the second piece is approximately 340 m/s.
To find the angle of the second piece, we can use trigonometry. Since the angle of the first piece is 30 degrees, the angle of the second piece can be determined as:
θ = 180 degrees - 30 degrees = 150 degrees
Therefore, the speed of the second piece is approximately 9,057 m/s, and its angle of travel is approximately 150.96 degrees.
Learn more about asteroid here
https://brainly.com/question/31747368
#SPJ11
a uniform meter stick swings about a pivot point which is a distance x = 23.3 cm from the end of the stick. what is its period of oscillation?
The periodic back and forth movement of something between two locations or states is referred to as oscillation.
To find the period of oscillation of the uniform meter stick, we can use the formula:
T = 2π√(I/mgd)
where T is the period of oscillation, I is the moment of inertia of the meter stick, m is the mass of the meter stick, g is the acceleration due to gravity, and d is the distance between the pivot point and the center of mass of the meter stick.
Since the meter stick is uniform, we can use the formula for the moment of inertia of a uniform rod rotating about its center of mass, which is:
I = (1/12)ml^2
where l is the length of the meter stick.
Substituting the given values, we get:
I = (1/12)(m)(1)^2 = (1/12)m
d = 0.5(1) = 0.5
x = 0.5 + 0.233 = 0.733 m
Therefore, the period of oscillation is:
T = 2π√[(1/12)m/(mgd)]
T = 2π√[(1/12)/(gd)]
T = 2π√[(1/12)/(9.81)(0.733)]
T = 1.35 seconds
Therefore, the period of oscillation of the uniform meter stick is 1.35 seconds.
To know about Oscillation visit:
https://brainly.com/question/30111348
#SPJ11
A diverging lens with a focal length of -13 cm is placed 14 cm to the right of a converging lens with a focal length of 19 cm . An object is placed 32 cm to the left of the converging lens.
If the final image is 22 cm from the diverging lens, where will the image be if the diverging lens is 39 cm from the converging lens?
Is it to the left or right of the diverging lens?
The final image is located 19.25 cm to the left of the diverging lens. Since this distance is negative, the image is located to the left of the diverging lens.
To solve this problem, we can use the thin lens equation:
1/f = 1/di + 1/do
where f is the focal length of the lens, di is the image distance from the lens, and do is the object distance from the lens. Positive values of di indicate a real image, while negative values indicate a virtual image.
For the initial setup, we have:
Object distance from the converging lens, do = -32 cm (negative because the object is to the left of the lens)
Focal length of the converging lens, f = 19 cm
Image distance from the converging lens, di = ?
Using the thin lens equation, we can solve for di:
1/19 = 1/di + 1/-32
1/di = 1/19 - 1/-32
1/di = 0.088
di = 11.36 cm (positive, indicating a real image)
Now, we have a real image produced by the converging lens at a distance of 11.36 cm to the right of the converging lens. This image becomes the object for the diverging lens, which is located 14 cm to the right of the converging lens.
Object distance from the diverging lens, do = 11.36 - 14 = -2.64 cm (negative because the object is to the left of the lens)
Focal length of the diverging lens, f = -13 cm
Image distance from the diverging lens, di = 22 cm
Using the thin lens equation again, we can solve for the final image distance:
1/-13 = 1/22 + 1/di
1/di = -0.052
di = -19.25 cm (negative, indicating a virtual image)
Therefore, the final image is located 19.25 cm to the left of the diverging lens. Since this distance is negative, the image is located to the left of the diverging lens.
Know more about virtual image here:
https://brainly.com/question/29759052
#SPJ11
Use the latent heat of fusion (melting) of ice (6.0 x 103J mol-1 at 273.15 K and 1 atm) to calculate the change in entropy when 1 moles of ice melt at p = 1 atm and T = 273.15 K. Express your answer in terms of] K-1, but do not include the units in your answer
The change in entropy when 1 mole of ice melts at p = 1 atm and T = 273.15 K is 22.0 J K^-1 mol^-1.
The change in entropy when 1 mole of ice melts at p = 1 atm and T = 273.15 K can be calculated using the formula:
ΔS = Q/T
Where ΔS is the change in entropy, Q is the latent heat of fusion (6.0 x 10^3 J mol^-1), and T is the temperature in Kelvin (273.15 K).
Substituting the given values, we get:
ΔS = (6.0 x 10^3 J mol^-1) / 273.15 K
ΔS = 22.0 J K^-1 mol^-1
Therefore, the change in entropy when 1 mole of ice melts at p = 1 atm and T = 273.15 K is 22.0 J K^-1 mol^-1.
In other words
To calculate the change in entropy when 1 mole of ice melts at p = 1 atm and T = 273.15 K, we can use the formula:
ΔS = q/T
where ΔS is the change in entropy, q is the heat absorbed during the melting process, and T is the temperature.
Given the latent heat of fusion of ice is 6.0 x 10³ J mol⁻¹, the heat absorbed by 1 mole of ice is 6.0 x 10³ J.
Now we can plug in the values into the formula:
ΔS = (6.0 x 10³ J) / (273.15 K)
ΔS ≈ 21.96 J K⁻¹ mol⁻¹
The change in entropy when 1 mole of ice melts at p = 1 atm and T = 273.15 K is approximately 21.96 J K⁻¹ mol⁻¹.
To know more about latent heat visit:
https://brainly.com/question/28044951
#SPJ11
Show that if two resistors R1 and R2 are combined and one is much greater than the other ( R1>>R2 ): (a) Their series resistance is very nearly equal to the greater resistance R1. (b) Their parallel resistance is very nearly equal to smaller resistance R2
Sure, I can help you with that! When two resistors R1 and R2 are combined, their total resistance can be calculated using the formulas for series and parallel resistance.
For series resistance, the total resistance is simply the sum of the individual resistances:
R_series = R1 + R2
If R1 is much greater than R2 (i.e., R1 >> R2), then the value of R2 is negligible compared to R1. In this case, the series resistance can be approximated as:
R_series ≈ R1
This means that the total resistance is very nearly equal to the greater resistance R1.
For parallel resistance, the total resistance is calculated using the formula:
1/R_parallel = 1/R1 + 1/R2
If R1 is much greater than R2, then 1/R1 is much smaller than 1/R2. This means that the second term dominates the sum, and the reciprocal of the parallel resistance can be approximated as:
1/R_parallel ≈ 1/R2
Taking the reciprocal of both sides gives:
R_parallel ≈ R2
This means that the total resistance in parallel is very nearly equal to the smaller resistance R2.
I hope that helps! Let me know if you have any further questions.
learn more about parallel resistance
https://brainly.in/question/28251816?referrer=searchResults
#SPJ11
A water wave traveling in a straight line on a lake is described by the equation
y(x,t)=(2.75cm)cos(0.410rad/cmx+6.20rad/st)
where y is the displacement perpendicular to the undisturbed surface of the lake.What horizontal distance does the wave crest travel in that time?
Express your answer with the appropriate units.
To find the horizontal distance traveled by the wave crest, we need to determine the distance covered by one complete wave cycle. In the given equation.
The coefficient of the x-term is 0.410 rad/cm, which represents the wave number or the number of radians per unit distance. The wave number is given by k = 0.410 rad/cm. We know that one complete wave cycle corresponds to a phase change of 2π radians. Therefore, the distance covered by one wave cycle is given by:
Distance = 2π / k = 2π / 0.410 cm/rad = 6.13 cm
Thus, the wave crest travels a horizontal distance of 6.13 cm in one complete wave cycle.
learn more about wave here:
https://brainly.com/question/25954805
#SPJ11