A vacuum tube diode consists of concentric cylindrical electrodes, the negative cathode and the positive anode. Because of the accumulation of charge near the cathode, the electric potential between the electrodes is not a linear function of the position, even with planar geometry, but is given by V(x) = Cx4/3 where x is the distance from the cathode and C is a constant, characteristic of a particular diode and operating conditions. Assume that the distance between the cathode and anode is 13. 6 mm and the potential difference between electrodes is 264 V.


(a) Determine the value of C. C = V/m4/3

(b) Obtain a formula for the electric field between the electrodes as a function of x. (Use your result from part(a). Use the following as necessary: x. ) Ex =_________.

(c) Determine the force on an electron when the electron is halfway between the electrodes. F = N

The velocity of the ball is 1 m/s which starts with a speed of 2.0 m/s and slows at a constant rate of 0.5 m/s².

According to the data given:

Speed of the ball: 2.0 m/s

Acceleration: 0.50 m/s²

Time is 2.0 s

The ball starts rolling up the hill with a speed of 2m/s (u=2 m/s²) and it decelerates at a constant rate of 0.5 m/s² (a = -0.5 m/s², minus because it decelerates).

The equation for calculating velocity is:

v = u + a x t,  t represents time here

So, ball's velocity after 2 seconds is:

v = 2m/s + (-0.5m/s² x 2s)

v = 2m/s + (-1m/s)

v = 1m/s

Learn more about acceleration:

brainly.com/question/28743430

#SPJ4

Answer:

kgm/s(-1)

Explanation:

the units of momentum will be the product of the units of mass and velocity. Mass is measured in kg and velocity in ms-1, therefore, the SI unit of momentum will be kgm/s(-1).

The set of spectral lines that we see in a star's spectrum depends on the star's (b) chemical composition, (d) temperature.

The spectral lines of a star are determined by its chemical composition and temperature. These properties determine the number and type of atoms present in the star's atmosphere. Each type of atom has its own unique set of spectral lines, and the temperature of the star determines the energy level of the atoms, which affects the wavelengths of the spectral lines emitted. The rotation rate and atomic structure of a star do not affect the set of spectral lines we see in its spectrum.

learn more about spectral lines here

https://brainly.com/question/27494244

#SPJ4

The value of d is 401.550.

Momentum can be viewed as a body's "power" while it is moving, or the amount of force it can exert on another body. For instance, a baseball (small mass) thrown quickly can have the same momentum as a bowling ball (big mass) going extremely slowly (low velocity) (high velocity).

"The motion of an item equal to the product of its mass and its velocity" is referred to as momentum. When we say anything has momentum, we are referring to its precise mass and direction of motion.

C+ΣMA = ( 200 cos 45) (d cos 30+0-3) -

(200 sin 45°) (d sin 30°)= -120

(200COS 45°) (0.3) + (200 cos 45°) (d cos30) +

(200sin 45') (d sin 30") = 120

d = 120- (200 cos 45) (0.3) / 200 (cos 45 Cos 30+ sin 45 sin 30)

d = 0.40155m

d = 401.55mm

d = 401.550

To learn more about momentum from given link

https://brainly.com/question/18798405

#SPJ4

Complete Question -

The linear momentum of the earth when mass and orbital radius are given is calculated to be 17.8 × 10²⁸ kg m/s.

The orbital radius (r) of earth is 1.496 × 10¹¹ m. So, the distance covered by one rotation is,

Distance = 2 π r = 2π (1.496 x 10¹¹) m

365 day when converted into seconds is, 365 × 24 × 60 ×60 s

So, the period of one rotation is 3.15 × 10⁷ s.

The velocity of earth (v) = distance/time = [2π (1.496 × 10¹¹)]/ 3.15 x 10⁷ = 298840 m/s

Linear momentum = mass × velocity = 5.972 × 10²⁴ kg × 298840 m/s = 17.8 × 10²⁸ kg m/s

Therefore, the linear momentum of earth is 17.8 × 10²⁸ kg m/s

To know more about momentum:

https://brainly.com/question/20340311

#SPJ4

Answer:

this because the surface tension was lowered by using an impurity or rising the temp of the water

The magnitude of the passenger's acceleration as she passes through the lowest point in her circular motion is the centripetal acceleration.

This is given by the equation a = v^2 / r, where v is the velocity of the passenger and r is the radius of the circle. Therefore, the magnitude of the passenger's acceleration is equal to the square of her velocity divided by the radius of the circle.

For example, if the passenger is travelling at 10 m/s in a circle with a radius of 5 m, then her centripetal acceleration would be 10^2 / 5 = 20 m/s^2.

Learn more about acceleration:

https://brainly.com/question/460763

#SPJ4

This minimum value is 223.9 m.

​

The attribute of motion of an item travelling a circular path is characterised as centripetal acceleration. Centripetal acceleration is defined as any item travelling in a circle with an acceleration vector pointing towards the centre of that circle.

The acceleration felt when moving in a uniform circular motion is known as centripetal acceleration. It always points toward the rotational centre. It is parallel to the linear velocity. The centripetal force is measured in an inertial frame of reference, whereas the centrifugal force is measured in a non-inertial frame of reference. Centripetal force is directed towards the axis of rotation or the centre of curvature, whereas centrifugal force is directed away from the circle's centre.

To learn more about centripetal acceleration, here

https://brainly.com/question/14465119

#SPJ4

The coefficient of magnetic field was found to be Bmax, k = 1.53x10¹¹, 1.14x10⁴,3.43x10¹² T,1/m,rad/s.

Moving charges, wave action, and magnetic materials all experience the magnetic influence of a magnetic field, which is a vector field. A force perpendicular to the charge's own velocity and the magnetization is applied to it when it moves through a magnetic field. A permanent magnet's magnetic field draws on ferromagnetic materials like iron and repels or attracts other magnets. The three additional magnetic effects of diamagnetism, electromagnetism, and biomagnetism also cause tiny forces to be exerted on "nonmagnetic" materials by a nonuniform magnetic field, although these forces are frequently so minute , they can only be detected using laboratory apparatus. Electric currents used in electromagnets and time-varying electric fields produce magnetic fields that surround magnetized objects.

Magnetic field maximum = 1.531011,

The wave number is 1.14104.

In teslas, the angular frequency is 3.431012 T.

meters-1 in reverse,

rad/s = radians per second

To learn more about Magnetic field follow the given link: brainly.com/question/25801845

#SPJ4

Answer:

-21.7m

Explanation:

To find the y-component of the vector, we need to find the vertical displacement from the point at the bottom of the vector to the x-axis (or its y-coordinate value).

To calculate this we can create a triangle with the vector as the hypotenuse, the y-axis as the second side and draw an imaginary line from the end of the vector directly horizontally across to the y-axis.

We can use the given angle to find the angle between the y-axis and the angle. Since the angle of a quadrant is 90 degrees, the angle within our triangle must be [tex]90-77.1=12.9[/tex] degrees.

From here, to find the length of the side on the y-axis we can use the trigonometric cos function.

[tex]cos \theta =\frac{adjacent side}{hypotenuse}[/tex]

Therefore [tex]cos 12.9=\frac{y-component}{22.3}[/tex] and [tex]ycomponent = 22.3cos12.9[/tex]

This gives us a value of 21.7 (3.s.f) for our y-component.

Finally, the y-component is also a vector so it also needs a direction. Therefore like its coordinate, its value will be -21.7m.

Answer:

359cm

Explanation:

The change in length of the cord due to a stretching force of 0.5N is given by Hooke's law:

ΔL = k * ΔF

Where ΔL is the change in length, k is the spring constant and ΔF is the change in force.

Since the spring constant for the cord is 3N/cm, the change in length due to a stretching force of 0.5N is:

ΔL = (3N/cm) * (0.5N) = 1.5 cm

Since the cord is already 350cm long, the total length of the cord when the stretching force is 0.5N is 350cm + 1.5cm = 351.5cm.

To find the length of the cord when the stretching force is 2.5N, we can use the same formula:

ΔL = (3N/cm) * (2.5N) = 7.5 cm

The total length of the cord when the stretching force is 2.5N is therefore 351.5cm + 7.5cm = 359cm.

Using a specific kind of raga played over a gramophone and loudspeakers, Singh replicated the experiment with field crops. Crop sizes grew to 25–60% over the average for the region. According to Singh, the violin's music has the biggest impact on plant development.

Nutrient interactions in the soil, which alter the availability of nutrients to plants, illustrate the range of interactions that may take place. High concentrations of one nutrient in the soil can conflict with the availability and absorption of other nutrients.

Loamy soils, which combine sand, clay, and silt particles, are thought to be the most fertile form of soil.

To know more about plant development visit :-

https://brainly.com/question/29123942

#SPJ4

The period of the child's motion is 3.171 seconds. The frequency of the vibration is 0.315 Hz.

The time period is 3.171 seconds.

2 × [tex]\pi[/tex] [tex]\frac{L}{g} ^{\frac{1}{2} }[/tex]

= 3.171 seconds

The frequency is the reciprocal of the time period.

f = 1 ÷ 3.171

= 0.315Hz

Learn more about frequency here:-

https://brainly.com/question/29739263

#SPJ4

The correct option is A, B, and C. A block resting on a slope is Weight, static friction, and Normal force.

Static friction is a force that continues an item at relaxation. Static friction definition can be written as: The friction skilled while individuals try to move a desk-bound object on a surface, without surely triggering any relative movement between the frame and the surface on which it's miles.

Static friction is a form of friction force that acts on a body when there's no relative motion between the object and the surface. So, it can act even if the frame is in motion however there should be no relative motion.

A pressure acting on an item is said to be a static force if it no longer exchanges the scale, function, or route of that precise object. The pressure implemented to a structure acts as a load to that precise structure, that is why static force is likewise called a static load.

To learn more about Static friction visit here:

brainly.com/question/13000653

#SPJ4

Complete Question:

A block is resting on a slope. (Figure 3) Which of the following forces act on the block?

Check all that apply.

A). Weight

B). Static friction

C). Normal force

D). Kinetic friction

E). Force of push

No, SCID is not a deletion mutation.

The AK2 gene, which codes for the mitochondrial enzyme adenylate kinase 2 (AK2), is mutated (missense mutations; deletions) in SCID, which is brought on by an increase in lymphocyte apoptosis [75,76]. A category of extremely rare diseases known as severe combined immunodeficiency (SCID) are brought on by abnormalities in various genes involved in the growth and operation of immune cells that fight infections. At birth, infants with SCID seem healthy, yet they are prone to serious infections.

Due to mutations in the gene encoding the common chain for several cytokine receptors, X-linked SCID is the most prevalent kind. Adenosine deaminase deficiency (ADA def.) and IL-7R-chain deficiency are the second and third most frequent causes, respectively.

To learn more about SCID from given link

https://brainly.com/question/15526421

#SPJ4

According to the United Nations Environment Programme, hydropower accounted for 16.6% of global electricity generation in 2018.

This is equivalent to a total installed capacity of 706 GW, making it the second largest energy source after thermal sources.

Hydropower is a renewable energy source and is often seen as a more sustainable alternative to thermal sources, as it does not release any greenhouse gases into the atmosphere. Additionally, hydropower is a reliable source of energy, and can be used to meet peak energy demand.

Learn more about hydroelectric energy:

https://brainly.com/question/3077353

#SPJ4

F PS-10-1-prime.gif > f before passing the horn, f PS-10-1-prime.gif < f after passing it describes the frequency f PS-10-1-prime.

Hence, Option A is correct.

To know more about railcars here

https://brainly.com/question/14652521

#SPJ4

Answer:

Below

Explanation:

Vertical components

   22 - 47 sin 55  = - 16.5 km

Horizontal components

   47 cos 55    = 26.96  

Use Pythagorean Theorem

  d^2 =   (-16.5)^2  + 26.96^2

   d = 31.6 km

The solutions are: The movement is 5 mm per year. The plate is 5,000 meters to the east. The Amur and Eurasian plates would collide, creating an ocean floor.

The rate of motion is in mm per year so you need to convert the distance it has moved to millimeters.

1 meter = 1,000 meters

125,000 will therefore be:

= 125,000 * 1,000

= 125,000,000 millimetersRate of motion = 125,000,000 / 25,000,000 years

= 5 mm/year

The plate is moving east and in 1 million years it would be:

= 1,000,000 * 5 mm/year

= 5,000,000 mm

n meters this is:

= 5,000,000 / 1,000

5,000 meters east

ecause the Amur and the Eurasian plates are moving apart, the ocean would have to fill up the space left which would lead to the development of a new oceanfloor.

Learn more about motion here-

https://brainly.com/question/22810476

#SPJ4

Answer: 5 mm/year, 5000 meters east, new ocean floor

Explanation:

The wool must start out negatively charged before becoming positively charged after donating its electrons to the rubber rod.

A rubber rod becomes negatively charged when wool is brushed against it, and the magnitude of the charge on the wool is equal to the charge on the rod. By applying the same amount of negative charge to the rod, the wool becomes positively charged.

Electrons generate energy while rubbing a polythene rod with a duster because of the friction. When they have enough energy, electrons can escape from an atom and "rub off" onto a polythene rod.

To know more about electrons visit:

brainly.com/question/12240595

#SPJ4

A human lifetime of 80 years is equal to 29,200,000 seconds.

The average human lifetime is typically 79 years, although this can vary greatly depending on various factors such as lifestyle, genetics, and environment. Generally, most people can expect to live anywhere from their late 60s to their mid-80s. However, some people live much longer, and some much shorter. Even within the same family, the range of lifespans can be quite varied.

This can be calculated by multiplying the number of seconds in a day (86,400) by the number of days in a year (365) by the number of years in a human lifetime (80).
86,400 x 365 x 80 = 29,200,000 seconds

To learn about more human lifetime.
https://brainly.com/question/11105393
#SPJ4

When it comes to frequency, a 2.3 MHz ultrasonic wave's characteristic does not alter while it travels through human tissues.

The frequency of a wave is the number of oscillations it performs in a second. It's calibrated in hertz (Hz). The number of waves that pass a specific place in a predetermined period of time is known as wave frequency. The hertz (Hz) is the SI unit for wave frequency, and 1 hertz is equivalent to 1 wave crossing a fixed point in 1 second. A wave with a higher frequency has more energy than a wave with a lower frequency of the same amplitude.

As a result, a wave's frequency is unaffected by the medium through which it travels.

To know more about the Frequency of a wave, refer to this link:

https://brainly.com/question/14316711

#SPJ4

As a result, X heat required = 27Q is the amount of heat needed to raise the temperature.

first case

Q = Specific Heat * Density of Sphere* (4/3*pi*D^3) * (7-4)     -1

Second case

X = Specific Heat * Density of Sphere* (4/3*pi*(3D)^3) * (7-4)    -2

Dividing 1 and 2 we get

Q/X = 1/27

27

where Q is the amount of heat that is transported to or from the item, m is the object's mass, C is the material's specific heat capacity, and T is the resultant temperature change of the object.

to know more about the heat here:

brainly.com/question/1429452

#SPJ4

When you touch a piece of wool against your skin, your skin acquires a negative charge because of the conservation of charge, which caused it to gain a positive charge.

Charge is a material's property that can be transferred into another person's body. The transfer of the charge results in the generation of electricity. The following are some examples of charge's various properties: 1 Electric charge addition 2 Electric charge conservation 3 Electric charge quantization. Equations in chemistry are denoted by the capital letter Q to denote charge, with the elementary charge of an electron (e) serving as a standard unit. The coulomb is the SI-derived unit of charge (C). In electrical engineering, the ampere-hour (Ah) unit of charge is frequently used.Dipole Definition in Chemistry and Physics. by this primary information we can consider that when you rub a piece of wool upon your skin and your skin becomes negatively charged because it gained a positive charge as the result of conservation of charge.

Learn more about Charge:

brainly.com/question/3412043

#SPJ4

The use of a mercury thermometer is not suitable for the purpose of determining the temperature of extremely cold ice because at such low temperatures, mercury transforms into a translucent state, making it impossible to read.

Another reasons why mercury thermometer is not suitable to measure the temperature of the very cold place are:

To learn more about mercury thermometer, click here:

https://brainly.com/question/28442913

#SPJ4

The magnitude of the horizontal net force required to bring the car to a halt in a distance of 50.0 m is 2370 N.

What is force?

Force is a quantity that describes the interaction between two objects or systems. It is a vector quantity, meaning it has both magnitude (size or strength) and direction. Forces can cause changes in an object's motion, shape, or internal energy.

The magnitude of the horizontal net force required to bring the car to a halt in a distance of 50.0 m can be calculated using the equation:

force = (mass * velocity^2) / (2 * distance)

where mass is the mass of the car, velocity is the initial velocity of the car, and distance is the distance over which the car is brought to a halt.

Plugging in the given values, we get:

force = (1580 kg * 150 m/s^2) / (2 * 50.0 m)

force = (237,000 N) / 100

force = 2370 N

Hence, the magnitude of the horizontal net force required to bring the car to a halt in a distance of 50.0 m is 2370 N.

To learn more about force from the given link:

https://brainly.com/question/25239010

#SPJ4

Transform boundaries, continental convergent boundaries, and oceanic convergent boundaries are the boundaries that are recorded.

A transform boundary is an area of a fault where two surfaces slide horizontally past one another.

An oceanic convergent boundary is the collision of two oceanic lithosphere-based plates. Even if this boundary contained the same kind of lithosphere, one of the plates would subduct beneath the other.

To learn more about Transform boundaries here:

https://brainly.com/question/28641825

#SPJ1

With the equation: it is possible to determine t for each of the four ramp segments. t 1 = t 2 - t 1, and t 2 = t 4 - t 3 Likewise, x is the distance between the designated spots for times 3 and 4, respectively.

Although the gravitational force is same when you roll the ball down a ramp, it is no longer in free fall. Now, it has a vector structure. Knowing the downward force and the ramp's incline makes the problem appear to be Pythagorean. Keep in mind that the ball will go at the same speed at the bottom of the ramp as it would have. A ball begins rolling down a ramp with constant acceleration at time zero (t=0), initially at rest. It moves 1 foot between t=0 and t=1 seconds, you see. How much movement occurs between t = 1 second and a.

To learn more about ramp's please click on below link

https://brainly.com/question/13492520

#SPJ4

Answer:

10 kg

Explanation:

Use law of conservation of momentum

momentum of system before collision = momentum of system after collision

    5 kg * 20 m/s +  x kg  * 10 m/s         = 5 kg * 10 m/s   +  x kg * 15 m/s

           100  + 10x                                   = 50 + 15 x

                 50                                =    5x

                   x = 10 kg

The impulse that the pelton wheel applies to the water is equal  to the change in momentum of the water after hitting the flat paddle wheel.

Impulse is a measure of the force applied to an object over a period of time, and it is equal to the change in momentum of the object.

In the case of the pelton wheel, the force is applied to the water by the flat paddle wheel, and the change in momentum of the water is the result of that force.

Therefore, The impulse of the pelton wheel is therefore equal to the change in momentum of the water after it hits the paddle wheel.

Learn more about pelton wheel from

https://brainly.com/question/20038787

#SPJ1