A unit train of coal consists of 110 carloads each carrying 100 tons of coal. 25% of the weigh of coal is water, the rest is coal with an energy content of 3.2 x 1o^10 J/tonHow much energy is contained in trainload of coalIf coal fired power plant can produce electricity at rate of 978 Megawatts and coal power plants are 38% efficient in converting energy in coal to electricity, how many trainloads of coal are needed daily to keep the plant running at full capacity

Answers

Answer 1

A unit train of coal consists of 110 carloads, with each carload carrying 100 tons of coal. The trainload of coal contains approximately 2.64 x 10¹⁴ J of energy and the power plant requires approximately 0.234 trainloads of coal per day to run at full capacity.

Part A:

The total weight of the coal in the train is:

110 carloads x 100 tons per carload = 11,000 tons

Since 25% of the weight of the coal is water, the weight of the coal itself is:

11,000 tons x (1 - 0.25) = 8,250 tons

The total energy contained in the coal is:

8,250 tons x 3.2 x 10¹⁰ J/ton = 2.64 x 10¹⁴ J

Therefore, the trainload of coal contains approximately 2.64 x 10¹⁴ J of energy.

Part B:

The power plant can produce electricity at a rate of:

978 MW = 978 x 10⁶ W

However, coal power plants are only 38% efficient in converting energy in coal to electricity. Therefore, the actual amount of energy produced by the power plant from a given amount of coal is:

0.38 x 3.2 x 10¹⁰ J/ton = 1.216 x 10¹⁰ J/ton

To produce 978 MW of electricity, the power plant needs:

978 x 10⁶ W / 1.216 x 10¹⁰ J/ton = 80.4 tons of coal per hour

Since each trainload carries 8,250 tons of coal, the power plant needs:

80.4 tons/hour x 24 hours/day / 8,250 tons per trainload = 0.234 trainloads per day

Therefore, the power plant needs approximately 0.234 trainloads of coal per day to keep running at full capacity.

To know more about the unit train refer here :

https://brainly.com/question/7992107#

#SPJ11


Related Questions

A train is traveling at 30.0 m/sm/s relative to the ground in still air. The frequency of the note emitted by the train whistle is 262 HzHz. The speed of sound in air should be taken as 344 m/sm/s .

Answers

frequency fapproach is heard by a passenger = 302.05 Hz

frequency frecede is heard by a passenger = 228.37433 Hz

Given :

speed of train to the ground = 30.0 m/s

frequency emitted by the train whistle = 262 Hz

speed of sound in air = 344 m/s

To Find :

(A) frequency fapproach (B) frequency frecede

Solution :

The frequency of approach is given by

f' = f v + v(relative)

v - v(air)

= 262x 344 + 18

344 - 30

f' = 302.05 Hz

The frequency of approach is 302.05 Hz

The frequency of recede is given by

f' = f v - v(relative)

v + v(air)

= 262 x 344 - 18

344 + 30

The frequency of recede is 228.37433 Hz

Learn more about Frequency here:

https://brainly.com/question/254161

#SPJ4

Why stars are shows like twinkling in the sky’s!
Reply please!

Answers

Answer:

As light from a star races through our atmosphere, it bounces and bumps through the different layers, bending the light before you see it. Since the hot and cold layers of air keep moving, the bending of the light changes too, which causes the star's appearance to wobble or twinkle.

A 36.5-g glass thermometer reads 23.6 ∘C before it is placed in 145 mL of water. When the water and thermometer come to equilibrium, the thermometer reads 40.8 ∘C. Ignore the mass of fluid inside the glass thermometer. The value of specific heat for water is 4186 J/kg⋅C∘, and for glass is 840 J/kg⋅C∘.

Answers

The initial temperature of the water was [tex]41.6688^{0} C[/tex].

Given,

Weight of glass 36.5g

specific heat for glass is 840 J/kg⋅C∘.

Initial temperature of glass was  [tex]23.6^{0} C[/tex].

Weight of water is 145*1=145g (Density*Volume=145ml*1g/ml)

Temperature final was [tex]40.8^{0} C[/tex].

specific heat for water is 4186 J/kgâ‹…Câˆ

(m of glass)(Cp of glass)(Tf_glass-Ti_glass) = (m of water)(Cp of water)(Ti_water - Tf_water)

36.5*840*(40.8-23.6)=145*4186*(Ti_water - 40.8)

Ti_water=[tex]41.6688^{0} C[/tex]

Specific heat

In thermodynamics, a material's specific heat capacity, or massic heat capacity as it is sometimes known, is equal to the heat capacity of a sample of the substance divided by the mass of the sample (symbol cp). Informally, it is the quantity of heat needed to raise a substance's temperature by one degree for every unit of mass that is added to it. joule per kelvin per kilogram, or Jkg1K1, is the SI unit for specific heat capacity. For instance, the amount of energy needed to increase the temperature of 1 kilogram of water by 1 K is 4184 joules, making water's specific heat capacity 4184 J kg 1 K 1.

Learn more about specific heat here:

https://brainly.com/question/11297584

#SPJ4

A 7.55 × 1014 hz electromagnetic wave travels in carbon tetrachloride with a speed of 2.05 ×108 m/s. what is the wavelength of the wave in this material?

Answers

Answer:

2.72×10^-7

Explanation:

velocity = frequency × wavelength

2.05×10^8=7.55×10^14 wavelength

wavelength = 2.05×10^8/7.55×10^14

wavelength = 2.72×10^-7

Monochromatic light with wavelength 590 nm passes through a single slit 2. 30 ?m wide and 1. 90 m from a screen. Find the distance between the first- and second-order dark fringes on the screen.

Answers

Answer:

The fringes are 4.7*10^-7 m apart, such that they are adjacent.

Explanation:

Using the formula for adjacent fringes given a single slit:

Δ[tex]x=\frac{(Wavelength)(Distance between slit and screen)}{Width}[/tex]

Δ[tex]x=\frac{(590/10^{9})(1.90) }{(2.30)}[/tex]

Δ[tex]x=0.000000487 m[/tex]

Hope this helps!

The distance between the first-order and second-order dark fringes on the screen will be 4.874 × 10⁻⁵ cm.

Given:

wavelength, λ = 590 nm = 590 × 10⁻⁹ m

Distance between the slit and screen, D = 1.90 m

Width of slit, d = 2.30 m

Calculation:

We know that the distance between two slits is given as:

Δx = λD / d

where  λ is the wavelength of light

           D is the distance between the slit and screen

           d is the width of the slit

Applying values in the above equation we get:

Δx = (590 × 10⁻⁹ m)(1.90 m) / (2.30 m)

    = 4.874 × 10⁻⁷ m

    = 4.874 × 10⁻⁵ cm

Therefore, the distance between the first- and second-order dark fringes on the screen will be 4.874 × 10⁻⁵ cm.

Learn more about interference here:

https://brainly.com/question/16098226

#SPJ4

What information do we know about the known exoplanets? a. estimates of orbits and masses b. complete composition c. precise masses d. all of the above e. none of the above

Answers

The correct option is A. The information we know about the known exoplanets is estimates of orbits and masses.

What is exoplanets?

An exoplanet or extrasolar planet is a planet outside the Solar System.

In other words, exoplanet is any planet beyond our solar system.

Characteristics of exoplanets

exoplanets are known for the following characteristics;

they are usually hotthey can orbit their stars so tightly that a “year” lasts only a few daysthey can orbit two suns at once

Thus, the information we know about the known exoplanets is estimates of orbits and masses.

Learn more about exoplanets here: https://brainly.com/question/1514493

#SPJ1

Which of the following is an advantage of recorded presentations? A. Start-times and time zones are not a factor. B. Speakers can adapt topic coverage if necessary. C. Audience members have the opportunity to provide feedback D. More visual aids can be used.

Answers

The answer of this is b. Speakers can adapt topic coverage if necessary because I said the answer is b

The statement describes an advantage of recorded presentations is that the audience members have the opportunity to provide feedback. Thus, the correct option for this question is C.

What do you mean by Recorded presentations?

A recorded presentation may be defined as a popular format of multimedia content with a duration of several seconds or minutes that significantly expresses the advantages of a product, service, or any idea with the support of interesting graphic images, concise text, and appropriate narration.

According to the context of this question, a recorded presentation delivers an advantage to the audience to provide feedback. This is because the process of recorded PowerPoint presentation gives the actual sense and understanding to the audience similar to the real event.

Therefore, the correct option for this question is C.

To learn more about Presentation, refer to the link:

https://brainly.com/question/24653274

#SPJ2

What must the charge (sign and magnitude) of a 3.45 g particle be for it to remain stationary when placed in a downward-directed electric field of magnitude 590 N/C

Answers

     charge must be equal to 5.74 ×10⁻⁵

 In the question it is said that the particle remains stationary which means the the net force on the particle is zero. So, the counterbalancing forces must be equal which means weight is equal to upward electric force.

     →    Fnet =0

     →    mg =  qE

 substituting the values we get :

         0.00345 × 9.81 =  q × 590

   →       q = 5.74 ×10⁻⁵

    Hence the charge must be equal to   5.74 ×10⁻⁵.

   Learn more about charges here:

          https://brainly.com/question/26092261

                    # SPJ4

The spectral type of this star is B7V. The order of spectral types, from hottest to coolest, is OBAFGKM. How does the surface temperature of this star compare with the other stars we have observed

Answers

The hottest celebrity is this one.

The majority of stars fall under a select few spectral categories. The hottest to the coldest stars are listed in the spectral types of the Henry Draper and Bright Star Catalogues (see stellar classification). The letters O, B, A, F, G, K, and M are used to indicate these categories in decreasing order of temperature.

What is Spectral type of star ?

Using spectral types, we can categorise stars based on their colour or the spectral lines that are visible in their light. The spectral types are OBAFGKM, with the hottest stars being O and the coldest being M. To humans, cooler stars appear redder and hotter stars appear bluer.

The letters O, B, A, F, G, K, and M are used to denote the seven classes into which the stars are classified

Learn more about Spectral type of stars here:

https://brainly.com/question/2658702

#SPJ4

A plastic rod is charged up by rubbing a wool cloth, and brought to an initially neutral metallic sphere that is insulated from ground. It is allowed to touch the sphere for a few seconds, and then is separated from the sphere by a small distance. After the rod is separated, the rod:.

Answers

After the rod is charged and then touched on the neutral metallic sphere and then separated from it, the rod  is repelled by the sphere. Option A

What is a static charge?

There are very ways in which a static charge could be built up in an object. The ways include;

FrictionElectrostatic induction and Contact

Now, after the rod is charged and then touched on the neutral metallic sphere and then separated from it, the rod  is repelled by the sphere.

Missing parts;

A plastic rod is charged up by rubbing a wool cloth, and brought to an initially neutral metallic sphere that is insulated from the ground. It is allowed to touch the sphere for a few seconds, and then is separated from the sphere by a small distance. After the rod is separated, the rod

A. is attracted by the sphere

B. is repelled by the sphere

C. feels no force due to the sphere

Learn more about static charges:https://brainly.com/question/14485896

#SPJ1

A lightning strike can transfer as much as electrons from the cloud to the ground. if the strike lasts 2ms , what is the average electric current in the lightning?

Answers

The average electric current in the lightning will be 8 × [tex]10^{-17}[/tex] A

Why Lightning Conductors on top of a tower ?

The lightning conductors are long metal strips running from the spike end of a conductor on the top of a building to the earth. They are used to prevent buildings from destruction when struck by thunder or lightning.

Given that a lightning strike can transfer as much as electrons from the cloud to the ground. if the strike lasts 2ms, to calculate the average electric current in the lightning, we will first consider the charge released.

one charge = 1.6 × [tex]10^{-19}[/tex] C

Average current I = Q/t

Where

Q = charge = 1.6 × [tex]10^{-19}[/tex] Ct = time = 2ms = 2 × [tex]10^{-3}[/tex] sI = current = ?

Substitute all the parameters into the formula

I = 1.6 × [tex]10^{-19}[/tex] C ÷ 2 × [tex]10^{-3}[/tex]

I = 8 × [tex]10^{-17}[/tex] A

Therefore, the average electric current in the lightning will be 8 × [tex]10^{-17}[/tex] A

Learn more about Lightning here: https://brainly.com/question/3183045

#SPJ1

What was the role of gravity in the formation of the solar system?
A. Gravity caused the solar system to move closer to the Sun.
OB. Gravity caused the solar system to compress into one larger
mass.
OC. Gravity caused the solar system to separate into individual
celestial bodies.
D. Gravity caused the solar system to expand from a central point.

Answers

The role of Gravity in the formation of the solar system is that gravity caused the the solar system to move closer to the Sun.

  This was possible because gravity attracted smaller particles together until they formed large particles and began to rotate around the sun.

What is Gravity?

Gravity is the force by which a planet or other body draws objects toward its center. The force of gravity keeps all of the planets in orbit around the sun.

Gravity can also be said to mean an attraction between objects  objects with mass.

Learn more about Gravity at https://brainly.com/question/557206

#SPJ1

An astronomical telescope is designed with over magnification of 35x if the object has a focal length of 100 cm what should be the focal length of the eyepiece and how far should the eyepiece be from the objective

Answers

The focal length of eyepiece is 2.85.

It is given that astronomical telescope is designed with over magnification of 35.

The object has a focal length of 100 cm.

We need to determine the focal length of the eyepiece.

The formula to be used here is for astronomical telescope is:

[tex]m=\frac{f_{0} }{f_{e} }[/tex]

Using values here, we get

[tex]35=\frac{100 }{f_{e} }[/tex]

[tex]f_{e}=100/35=2.85[/tex]

Hence, the focal length of eyepiece is 2.85

Learn more about astronomical telescope click here https://brainly.com/question/14672626

#SPJ1

A convex lens has a focal length f. An object is placed between infinity and 2f from the lens along a line perpendicular to the center of the lens. The image is located at what distance from the lens

Answers

The image formed will be located between the focal point, f and double of the distance from focal point, 2f.

What is convex lens?

A convex lens is the name given to any converging lens.

A converging lens or convex lens is a lens that converges rays of light that are traveling parallel to its principal axis.

What is focal length?

The focal length, f of a lens is  the distance between the center of a lens  and its focus.

Object placed between infinity and 2f

For an object that is placed between infinity and double of the distance from focal point, along a line perpendicular to the center of the lens,

The image formed will be located between the focal point, f and double of the distance from focal point, 2f.

Thus, for an object placed between infinity and 2f from the lens along a line perpendicular to the center of the lens. The image formed will be located between the focal point, f and double of the distance from focal point, 2f.

Learn more about convex lens here: https://brainly.com/question/10153605

#SPJ1

A 540 gram object is attached to a vertical spring, causing the spring’s length to change from 70 cm to 110 cm.

What is the spring constant k?

Group of answer choices

130 N/m

33 N/m

13 N/m

330 N/m

Answers

Answer:

Approximately [tex]13\; {\rm N \cdot m^{-1}}[/tex] (assuming that [tex]g = 9.81\; {\rm N \cdot kg^{-1}}[/tex].)

Explanation:

Let [tex]F_{\text{s}}[/tex] denote the force that this spring exerts on the object. Let [tex]x[/tex] denote the displacement of this spring from the equilibrium position.

By Hooke's Law, the spring constant [tex]k[/tex] of this spring would ensure that [tex]F_\text{s} = -k\, x[/tex].

Note that the mass of the object attached to this spring is [tex]m = 540\; {\rm g} = 0.540\; {\rm kg}[/tex]. Thus, the weight of this object would be [tex]m\, g = 0.540\; {\rm kg} \times 9.81\; {\rm N \cdot kg^{-1}} \approx 5.230\; {\rm N}[/tex].

Assuming that this object is not moving, the spring would need to exert an upward force of the same magnitude on the object. Thus, [tex]F_{\text{s}} = 5.230\; {\rm N}[/tex].

The spring in this question was stretched downward from its equilibrium by:

[tex]\begin{aligned} x &= (70\; {\rm cm} - 110\; {\rm cm}) \\ &= (-40)\; {\rm cm} \\ &= (-0.40) \; {\rm m}\end{aligned}[/tex].

(Note that [tex]x[/tex] is negative since this displacement points downwards.)

Rearrange Hooke's Law to find [tex]k[/tex] in terms of [tex]F_{\text{s}}[/tex] and [tex]x[/tex]:

[tex]\begin{aligned} k &= \frac{F_{\text{s}}}{-x} \\ &\approx \frac{5.230\; {\rm N}}{-(-0.40)\; {\rm m}} \\ &\approx 13\; {\rm N \cdot m^{-1}}\end{aligned}[/tex].

Three charges, qA is +6.0 μC, qB is –5.0 μC, and qc is +6.0 μC, are located at the corners of a square with each
side length at 5.0 cm as shown in the diagram. Calculate the electric field at point D.

Answers

The net electric field at point D is determined as 3.95 x 10⁷ N/C.

Electric field at D due to charge A

E = kq/r²

where;

r is the distance between A and Dq is charge A

E(AD) = (9 x 10⁹ x 6 x 10⁻⁶)/(0.05²)

E(AD) = 2.16 x 10⁷ i N/C

Electric field at D due to charge B

E = kq/r²

where;

r is the distance between A and Bq is charge B

r² = 5²  + 5²

r² = 50

r = √50

r = 7.07 cm

E(BD) = (9 x 10⁹ x 5 x 10⁻⁶)/(0.0707²)

E(BD) = 9 x 10⁶ N/C

in x - direction = 9 x 10⁶ N/C x cos(45) = 6.36 x 10⁶ i  N/C

in y - direction = 9 x 10⁶ N/C x sin(45) = 6.36 x 10⁶j  N/C

Electric field at D due to charge C

E = kq/r²

where;

r is the distance between C and Dq is charge C

E(CD) = (9 x 10⁹ x 6 x 10⁻⁶)/(0.05²)

E(CD) = 2.16 x 10⁷ j N/C

sum of electric field in x direction

Ei = 2.16 x 10⁷ i N/C  + 6.36 x 10⁶ i  N/C

Ei = 2.796 x 10⁷ i N/C

sum of  electric field in y direction

Ej = 2.16 x 10⁷ j N/C  + 6.36 x 10⁶j  N/C

Ej = 2.796 x 10⁷ j N/C

Resultant electric field at D

E = √Ei² + Ej²

E = √[(2.796 x 10⁷)² + (2.796 x 10⁷)²]

E = 3.95 x 10⁷ N/C

Thus, the net electric field at point D is determined as 3.95 x 10⁷ N/C.

Learn more about electric field here: https://brainly.com/question/14372859

#SPJ1

A stone ‘X’ of mass 2 kg is at the height of 20m in two minutes, calculate the power delivered. [g=10 m/s-2]

Answers

400 J power will be delivered by lifting a stone of mass 2 kg at the height of 20m in two minutes.

What is power?

The quantity of energy transferred or transformed per unit of time is known as power. The watt, or one joule per second, is the unit of power in the International System of Units. Power is also referred to as an activity in ancient writings. A scalar quantity is a power.

Work completed and time is linked in the power equation. Since forces may move objects and we know that forces perform work, we might anticipate that by understanding the power, we can gain insight into how a body moves through time. This outcome may be especially beneficial.

Given that, a stone ‘X’ of mass 2 kg is lifted to the height of 20m in two minutes, and g=10 m/s-2

Power Delivered = Work done in lifting the stone

Work Done = Potential energy = mgh

Work done = 2 × 10 × 20

Work done = 400 J

To know more about work done refer to: https://brainly.com/question/10247507

#SPJ1

The spectral type of this star is listed as K5V. (V means it is a main sequence star.) Based on the table below, how does the surface temperature of this star compare with that of HIP 87937

Answers

It turns out that the star in question belongs to the K5V star class. Thus, the surface temperature of this must be between 5200 K and 3700 K. It has a surface temperature of 6200 K to 5200 K and is a G2V class star, commonly known as Bernard's star. In other words, the star in question has a colder surface than HIP 87937. This is further explained below.

What is surface temperature?

Generally, The temperature at a surface is referred to as the surface temperature. In particular, it may refer to the surface air temperature, which is the temperature of the air that is relatively close to the earth's surface.

In conclusion, The star in question is of the K5V type. Therefore, the temperature of the surface of this must be somewhere between 5200 and 3700 kelvin. The star with the designation HIP 87937, often known as Bernard's star, is of the G2V type. Stars of this type have a surface temperature that falls anywhere between 6200 and 5200 degrees Celsius. Therefore, it should come as no surprise that the surface temperature of the given star is lower than that of HIP 87937.

Read more about surface temperature

https://brainly.com/question/5344945

#SPJ1

Answer: It is hotter because K is before M

Explanation:

The actual surface temperature of this star is 4600 KK compared to 3100 KK for the M4 star in Parts A and B.

When a voltage of 12 V is applied to a resistor, a current of 2.5 A passes through it. What is the resistance of the resistor

Answers

Answer:

4.8 Ω

Explanation:

Ohm's law

V = IR

 or    V/I = R

        12/2.5 = R = 4.8 Ω

A force does work on an object if a component of the force __________.
Group of answer choices

a. is parallel to the displacement of the object

b. is perpendicular to the displacement of the object

c. perpendicular to the displacement of the object moves the object along a path that returns to its starting point

d. parallel to the displacement of the object moves the object along a path that returns to its starting point

Answers

Option A.  A force does work on an object if a component of the force is  is parallel to the displacement of the object.

Work done by force

The force applied to an object to displace it from a given point to another point is known as work done on the object.

W = Fd cosθ

where;

f is the magnitude of applied forced is the displacement of the object.θ is the angle between the applied force and displacement.

Thus, A force does work on an object if a component of the force is  is parallel to the displacement of the object.

Learn more about work done here:https://brainly.com/question/8119756

#SPJ1

what is the best fuse for 1000 w heater?
a)3A
b)4A
c)5A
d)11A​

Answers

c)5A

Explanation:

As,

[tex]I = \frac{P}{V} = \frac{1000}{220} = 5[/tex]

Radiation in the ultraviolet region of the electromagnetic spectrum is quite energetic. It is this radiation that causes dyes to fade and your skin to develop a sunburn. If you are bombarded with 1. 00 mol of photons with a wavelength of 370. Nm, what amount of energy, in kilojoules per mole of photons, are you being subjected to? energy mol submit answer try another versiorn 2 item attempts remaining.

Answers

The  energy of photon in kJ/mol is 329kJ/mol.

Wavelength of radiation is 370nm. The frequency of given wavelength is

            ν = c / λ

            ν = 3×10^8 / 370×10^-9

            ν = 8.11 × 10^14 s^-1

      Now the energy of photon is:

             E = hν

             E = 6.63×10^-34  J.s/photon × 8.11×10^14s^-1

             E = 5.41× 10^-19  J/photon

         To find in mole

              E = 5.41× 10^-19 × 6.022×10^23

               E = 3.29 ×10^ 5 J/mol

   So, the energy of mole of photon is equal to 329 kJ/mol.

        Learn more about radiation here:

                https://brainly.com/question/18650102

                     #SPJ4  

A large box is being pushed across the floor at a constant speed of 4.0 m/s. What can you conclude about the forces acting on the box?

Answers

There is no force acting on the large box.

What is the force according to Newton's law?According to Newton's second law of motion, Force is defined as the rate of change of momentum with respect to time.Mathematically, force = mass × accelerationAnd acceleration = velocity/ timeHere, the large box is moving with constant velocity. So its velocity is not changing with time.So velocity / time = zero i.e. acceleration= zeroIt leads to the force to be zero.

Thus, we can conclude that the force on the large box is zero.

Learn more about the Newton's second law of motion here:

brainly.com/question/25545050

#SPJ1

A toy car is placed at 0 on a number line. It moves 9 cm to the left, then 4 cm to the right, and then 6 cm to the left. What is the total distance the toy car traveled?

1 cm
5 cm
11 cm
19 cmis the displacement of an object during a specific unit of time.

Answers

The total distance the toy car traveled is D. 19cm

Calculations and Parameters

The total distance of the toy car traveled in cm would be calculated

We would add the sum:

D = 9 + 4 + 6 cm

D = 19 cm

Therefore, the total distance the toy car traveled in cm is 19 cm.

Read more about displacement here:

https://brainly.com/question/2109763

#SPJ1

Consider vectors u and v, where u = ⟨1, –1⟩ and v = ⟨1, 1⟩. what is the measure of the angle between the vectors?

Answers

The angle between the two vectors is 0⁰, thus the two vectors are parallel to each other.

Angle between the vectors

The angle between the vectors describes the direction of the vector and the value of the angle can be determined from the horizontal and vertical components of the vectors as shown below.

The sum of the horizontal components and vertical components of the vectors is calculated as follows;

Sum of the horizontal component of the vectors, x = 1 + 1 = 2

Sum of the vertical component of the vectors, y = -1 + 1 = 0

The angle between the vectors is calculated as follows;

θ = arc tan (y/x)

θ = arc tan (0/2)

θ = arc tan (0)

θ = 0⁰

The angle between the two vectors is 0⁰, thus the two vectors are parallel to each other.

Learn more about vectors here: https://brainly.com/question/25811261

#SPJ1

Answer: C. 90°

Explanation:

When a person is standing upright, the weight of anything being lifted and carried in the hands is first reflected onto the:

Answers

Pelvic girdle

In human anatomy, the pelvis is a complex of bones that connects the trunk and the legs, supports and balances the trunk, and houses and supports the intestines, the urinary bladder, and the internal organ. It is sometimes referred to as the bony pelvis or the pelvic girdle.
One is located on the left side of the body and the other is located on the right. They come together to make the pelvic girdle, a portion of the pelvis. The hip bones are attached to the upper portion of the skeleton at the sacrum.
The pelvic girdle's main function is to support the upper body's weight while seated and transfer that weight to the lower limbs while standing. For the muscles in the trunk and lower limbs, it functions as attachment point.

To learn more about pelvic girdles please visit -
https://brainly.com/question/24394348

#SPJ4

Why is quantum computing potentially a better fit for weather forecasting than classical computers?.

Answers

Quantum computing is a better fit than classical computing because it can access advanced simulations for vast quantities of weather.

What is Quantum computing?

Quantum computing can process large number of data sets of weather for all the properties of quantum states. Unlike classical computers which contains only standard bits 0 and 1 , quantum computing use Qubit or Quantum bit in which there are more than two standard sets of bits. These Qubits can measure the light at any degrees of polarisation between 1 and 0.This is the spin attribute that corresponds to superposition. This can create a lot more possibilities beacuse we can run multiple tasks at once with only one bit of data beacuse of the superpositioned qubit. This unlike classical computers where the bit can be only 1 and 0 is more effectively used in breaking encryption tasks.

So, the analysis of vast quantities of weather data can be done in seconds using Quantum computing.

Learn more about Quantum computing here:

https://brainly.com/question/15188300

#SPJ1

A uniform bar 15m long balanced on a pivot at its midpoint. A boy of mass 55kg sits on one arm of the bar at a point 5m away from the pivot. What mass can be placed 2m away from the other end of the bar to keep the bar horizontally

Answers

The mass at the other end of bar will be 50g .

what is mass

It is the fundamental property of matter , every single property which exist in this world has mass

Mass never can be 0 .

So , the system is in equilibrium

let mass of the body be m

55×5= m×5.5

m= 5 5 × 5 /. 5.5

m= 5 0g



to learn more about mass click here https://brainly.com/question/26150306

#SPJ9

137.5 kg mass can be placed 2m away from the other end of the bar to keep the bar horizontally.

What does horizontal mean?Any straight line traveling from left to right or right to left is a horizontal line. If two points on a line share the same Y-coordinates, the line is said to be horizontal in coordinate geometry. It is derived from the word "horizon." In other words, the horizon or x-axis is always parallel to the horizontal lines.In the coordinate plane, a horizontal line is a straight line drawn from right to left or from left to right, perpendicular to the x-axis. In other words, a horizontal line is a straight line with an intercept solely on the y-axis, not the x-axis.

To keep the bar horizontal, the right and left side torques must be equal:

[tex]F_{1} d_{1} =F_{2} d_{2}[/tex]

[tex]F_{2} =F_{1} \frac{d_{1} }{d_{2} }[/tex]

    [tex]=(55.9.8)\frac{5}{2}[/tex]

    =1347.5 N.

Convert this force of gravity into mass:

[tex]F_{2} =m_{2} g,[/tex]

[tex]m_{2} =\frac{F_{2} }{g}[/tex]

     [tex]=\frac{1347.5}{9.8}[/tex]

     =137.5 kg.

The answer is 137.5 kg.

To learn more about Horizontal, refer to:

https://brainly.com/question/25806750

#SPJ9

Pearl labels a diagram of a charged capacitor as shown. Which change would correct the error in the diagram?
A) changing +2Q to +Q
B) changing +2Q to –2Q
C) reversing the direction of the arrows
D) reversing the labels for Conductors and Insulator

Answers

To correct the error in the diagram, we need to change +2Q to +Q in order for the charges to become balanced. Option A

What is a capacitor?

A capacitor is  device that is used for storing electric charge. We know that the capacitor is composed of two conductors separated by an insulator.

In order to correct the error in the diagram, we need to change +2Q to +Q in order for the charges to become balanced. Option A

Learn more about capacitor:https://brainly.com/question/17176550

#SPJ1

Answer:

A

Explanation:

It is advisable to place room heater at the ground level for effective heating

Answers

Answer:

yes

Explanation:

The heater is placed near the floor because the air currents move upwards so the hot air fills up the whole room. Whereas, an air conditioner is placed near the ceiling because the cold breeze tends to settle down. If it is placed near the floor then it will fill just the bottom of the room with cool air.

Other Questions
What are the roots of the polynomial equation x superscript 4 baseline x squared = 4 x cubed minus 12 x 12? use a graphing calculator and a system of equations. round noninteger roots to the nearest hundredth. Which of the following algorithms are used in asymmetric encryption Why might mattel set a much lower margin on its barbie dolls than on the accessories for the dolls? What comes next in the following series? What was the network of safe houses that assisted runaway enslaved persons?a.slave housesc.Underground Railroadb.runaway housesd.slave codes As soon as possible, you need to learn from Lori in Shipping and Receiving whether she and her colleagues can fulfill a large, time-sensitive customer order. If she cannot, you need her advice on where you can get it done. Read the passage from The Odyssey - Penelope.Ruses served my turnto draw the time outfirst a close-grained webI had the happy thought to set up weavingon my big loom in the hall.Which word from the passage best explains what the web in the passage symbolizes?rusestimehappyweaving The share of deposits that banks must have in reserves is the . The interest rate banks charge each other for very short-term loans is the . The interest rate the Federal Reserve charges commercial banks for loans is the In San Francisco there are many restaurants that specialize in a wide variety of cuisines. Patronage at these restaurants is influenced by factors such as tastes, price, and location. This market is Which condition is characterized by a blowing or clicking sound? You have been put in charge of S3 buckets for your company. The buckets are separated based on the type of data they are holding and the level of security required for that data. You have several buckets that have data you want to safeguard from accidental deletion. Which configuration will meet this requirement The practice of relying on the judgment of the police leadership and rank-and-file officers to decide which laws to enforce is referred to as? When ATP breaks down to ADP, potential energy stored in bonds is released. This energy stored in bonds is Koos spent 3/7 of his monthly pocket money during the first week. The following week he spends two- thirds of what he had spent the previous week. The fraction of the pocket money that is still left is. Array Basics pls help Which classification best represents a triangle with side lengths 10 in., 12 in., and 15 in.?acute, because 102+122>152acute, because 122+152>102obtuse, because 102+122>152obtuse, because 122+152>102 How many movements does a typical classical-era concerto have? A local bank will pay you $99 a year for your lifetime if you deposit $1,100 in the bank today. If you plan to live forever, what interest rate is the bank paying Which is the completely factored form of 12x4 + 39x3 + 9x2?3x2(x 3)(4x 1)3x2(x + 3)(4x + 1)3x(x + 3)(4x + 1)3x(x 3)(4x + 1) The ______ function shall suspend execution of the calling thread until status information for one of the terminated child processes of the calling process is available