Answer:
[tex]F_x=208.25\ N[/tex]
Explanation:
Given that,
Mass of a crate is 22 kg
It moved up along the 15 degrees incline without tipping.
We need to find the corresponding magnitude of force P. The force P is acting in horizontal direction.
It means that the horizontal component of force is given by :
[tex]F_x=F\cos\theta\\\\F_x=mg\cos\theta\\\\F_x=22\times 9.8\times \cos(15)\\\\F_x=208.25\ N[/tex]
So, the horizontal component of force is 208.25 N.
The temperature of a plastic cube is monitored while the cube is pushed 8.6 m across a floor at constant speed by a horizontal force of 19 N. The monitoring reveals that the thermal energy of the cube increases by 120 J. What is the increase in the thermal energy of the floor along which the cube slides
Answer:
Answer:
43.4J
Explanation:
We know that
Work done = total heat energy
But work done is force x distance
=> F = 19 x8.6 = 163.4 J
So the total heat. Will be Heat of cube + heat of floor = 163.4J
So that heat of floor will now be
floor = 163.4 J - 120 J = 43.4 Joules
Explanation:
The mass of the crate can also be adjusted by clicking on the More Features tab and then using the slider bar in the right panel. How does the maximum angle for which the crate can remain at rest on the ramp depend on the mass of the crate
Answer:
The maximum angle does not depend on the mass
Explanation:
This is because In as much as the force acting on the normal which is the the maximum force of static friction increases as the mass increases, the component of the force of gravity parallel to the ramp increases at the same rate. Thus The maximum angle is independent of the mass.
A spring with a mass of 5 Kg has natural length 0.5m. A force of 35.6 N is required to maintain it stretched to a length of 0.5m. If the spring is stretched to a length of 0.5m and released with initial velocity 0, find the position of the mass at any time t. Here damping constant is zero.
Answer:
Explanation:
force constant of spring k = force / extension
= 35.6 / 0.5
k = 71.2 N / m
angular frequency ω of oscillation by spring mass system
[tex]\omega = \sqrt{\frac{k}{m} }[/tex]
where m is mass of the body attached with spring
Putting the values
[tex]\omega = \sqrt{\frac{71.2}{5} }[/tex]
ω = 3.77 radian / s
The oscillation of the mass will be like SHM having amplitude of 0.5 m and angular frequency of 3.77 radian /s . Initial phase will be π / 2
so the equation for displacement from equilibrium position that is middle point can be given as follows
x = .5 sin ( ω t + π / 2 )
= 0.5 cos ω t
= 0.5 cos 3.77 t .
x = 0.5 cos 3.77 t .
Suppose a particle of mass m is confined to a one-dimensional box of length L. We can model this as an infinite square well in which the particle's potential energy inside the box is zero and the potential energy outside is infinite. For a particle in its first excited state, what is the probability Prob(center20%) of finding the particle within the center 20% of the box
Answer: P = 4.86 × 10⁻²
Therefore, the particle's quantum number is 4.86 × 10⁻²
Explanation:
The expression of wave function for a particle in one dimensional box is given as;
φ(x) = ( √2/L ) sin ( nπx/L )
now we input our given figures, the limit of the particle to find it within the center of the box is
xₓ = L/2 + 20% of L/2
xₓ = L/2 + (0.2)L/2
xₓ = 3L/5
And the lower limit is,
x₁ = L/2 - 20% of L/2
x₁ = L/2 - (0.2) L/2
x₁ = 2L / 5
The expression for the probability of finding the particle within the center of the box is
P = ∫ˣˣₓ₁ ║φ(x)║² dx
P = ∫ ³L/⁵ ₂L/₅║(√2/L) sin ( nπx/L)║²dx
= 2/L ( ∫ ³L/⁵ ₂L/₅║sin ( nπx/L)║²dx
= 2/L ( ∫ ³L/⁵ ₂L/₅ (( 1 - cos ( 2πnx/L)/2) dx)
The particle is in its first excited state, then
n =2
Then calculate the particle's quantum number as follows;
= 2/L ( ∫ ³L/⁵ ₂L/₅ (( 1 - cos ( 2π(2)x/L)/(2)) dx)
= 1/L ( ∫ ³L/⁵ ₂L/₅ (( 1 - cos ( 4πx/L)/2) dx)
= 1/L ( x - (L/4π)sin (4πx/L)) ³L/⁵ ₂L/₅
= 1/L ((3L/5) - (L/4π) sin (( 4π(3L/5)/L)) - (( 2L/5) - (L/4π)sin ( 4π(2L/5)/L)))
= 1/L ( L/5 + L/4π (sin(8π/5) - sin ( 12π/5)))
Use the trigonometric formula to solve the above equation
sinA - sinB = 2sin ( A-B/2) cos (A+B/2)
Calculate the particle's quantum number as follows
P = 1/L ( L/5 + L/4π (sin(8π/5) - sin ( 12π/5)))
= 1/5 + 1/4π ( 2sin( (8π/5 -12π/5 ) / 2 ) cos ( (8π/5 + 12π/5) / 2 ))
= 1/5 + 1/2π ( -sin(2π/5) cos2π
= 1/5 - 1/2π ( sin (2π/5)(1))
= 0.0486 (10⁻²)(10²)
= 4.86 × 10⁻²
Therefore, the particle's quantum number is 4.86 × 10⁻²
A cheetah can accelerate from rest to 25.0 m/s in 6.22 s. Assuming constant acceleration, how far has the cheetah run in this time
Answer:
The distance covered by the cheetah during the motion is 77.75 m
Explanation:
Given;
initial velocity of cheetah, u = 0
final velocity of cheetah, v = 25 m/s
time of acceleration, t = 6.22 s
Apply kinematic equation;
[tex]s = (\frac{v+u}{2} )t[/tex]
where;
s is the distance covered by the cheetah during the motion
[tex]s = (\frac{v+u}{2} )t\\\\s = (\frac{25+0}{2} )6.22\\\\s = 77.75 \ m[/tex]
Therefore, the distance covered by the cheetah during the motion is 77.75 m
A tire swing hanging from a branch reaches nearly to the ground. How could you estimate the height of the branch using only a stopwatch?
Answer:
A stop watch measures time and the number of seconds making an osculation is the period T
Which is T = 2π√(L/g)........solving for L (the length of the pendulum),
Then the L = T²x g/( 4πr²) substitute and then u find length or height of the swing
A 1.5m wire carries a 7 A current when a potential difference of 87 V is applied. What is the resistance of the wire?
Answer:
Ohm's law states that I=V/R (Current=volts divided by resistance). Since we're looking for resistance, we'll rewrite it as R=V/I. Then just plug in the numbers; R=84/9, R= 9 1/3 or 28/3. The resistance of the wire is 9.33... or 9 1/3 ohm's, depending on how you wanna write it.
Hope it helped u if yes mark me BRAINLIEST!
Tysm!
I would appreciate it!
Answer:
[tex]R\approx12.43 \,\, \Omega[/tex]
Explanation:
We can use Ohm's Law to find the resistance R of a wire that carries a current I under a given potential difference:
[tex]V=I\,\,R\\R = \frac{V}{I} \\R=\frac{87}{7} \\R\approx12.43 \,\, \Omega[/tex]
The velocity of any point on a rigid body is _________ to the relative position vector extending from the IC to the point. Group of answer choices
Answer:
The velocity of any point on a rigid body is ___Always perpendicular______ to the relative position vector extending from the IC to the point
Explanation:
This is because The instantaneous center (IC) of zero velocity for the rigid body is at the point in contact with ground. The velocity direction at any point on the body is always perpendicular to the line connecting the point to the IC.
The velocity of any point on a rigid body is : Perpendicular to the relative position vector extending from the IC to the point.
The IC ( instantaneous center ) is the point of the rigid body in contact with the ground when the rigid body is at zero velocity.
The velocity direction from any point of the rigid body will always be perpendicular to the ( IC ) since the IC is the reference point of the rigid body when the body is at rest ( zero velocity ).
Hence we can conclude that the velocity of any point on a rigid body will be perpendicular.
Learn more : https://brainly.com/question/13108309
Although the options related to your question is missing an accurate answer is provided within the scope of your question
How large an expansion gap should be left between steel railroad rails if they may reach a maximum temperature 36.0°C greater than when they were laid? Their original length is 26.0 m.
Answer:
11 mm
Explanation:
Original length L' = 26 m
Increase in temperature dT = 36.0°C
The gap l =?
The coefficient of linear expansion for steel & = 12 × 10^−6 per °C
The gap will be gotten from the equation of linear expansion.
l = L' x & x dT
substituting, we have
L = 26 x 12 × 10^−6 x 36
L = 0.011 m = 11 mm
The spaceship Intergalactic landed on the surface of the uninhabited Pink Planet, which orbits a rather average star in the distant Garbanzo Galaxy. A scouting party sets out to explore. The party's leader–a physicist, naturally–immediately makes a determination of the acceleration due to gravity on the Pink Planet's surface by means of a simple pendulum of length 1.44 m. She sets the pendulum swinging, and her collaborators carefully count 1.10×102 complete cycles of oscillation during 2.00×102 s. What is the result
Answer:
18808.7 m/s^2
Explanation:
Given
Length of the pendulum L = 1.44 m
Number of complete cycles of oscillation n = 1.10 x 10^2
total time of oscillation t = 2.00 x 10^2 s
The period of the T = n/t
T = (1.10 x 10^2)/(2.00 x 10^2) = 0.55 ^-s
The period of a pendulum is gotten as
T = [tex]2\pi \sqrt{\frac{L}{g} }[/tex]
where g is the acceleration due to gravity
substituting values, we have
0.55 = [tex]2\pi \sqrt{\frac{1.44}{g} }[/tex]
0.0875 = [tex]\sqrt{\frac{1.44}{g} }[/tex]
squaring both sides of the equation, we have
7.656 x 10^-3 = 144/g
g = 144/(7.656 x 10^-3) = 18808.7 m/s^2
Capacitor C1 is in series with capacitors C2 and C3 in parallel. Then three capacitor system is connected to battery with V0. Determine the charge stored by C1 when C1 = 20 μF, C2 = 10 μF, C3 = 30 μF, and V0 = 18 V.g
Answer:
Q₁ = 2.4 10⁻⁴ C
Explanation:
We have a circuit with several capacitors, let's find the equivalent capacitor of the parallel
[tex]C_{eq1}[/tex] = C₂ + C₃
C_{eq1} = (10 +30) 10⁻⁶
C_{eq1} = 40 10⁻⁶ F
There remains a series system between C₁ and C_{eq1}, let's find the equivalent capacitor
1/C_{eq2} = 1 / C₁ + 1 / C_{eq1}
1 /C_{eq2} = 1 / 20 10⁻⁶ + 1/40 10⁻⁶
1 / C_{eq2} = 0.075 10⁶
C_{eq2} = 13.33 10⁻⁶ F
let's use the relationship
V = Q / C_{eq2}
Q = V C_{eq2}
Q = 18 13.33 10⁻⁶
Q = 2.4 10⁻⁴ C
In a combination of capacitors in series the charge is constant, so the charge on C₁ is the same
Q₁ = 2.4 10⁻⁴ C
The rotating loop in an AC generator is a square 12.0 cm on a side. It is rotated at 70.0 Hz in a uniform field of 0.800 T. Calculate the following quantities as functions of time t, where t is in seconds. I need help with d and e.
(a) the flux through the loop
11.52cos(140πt) mT·m2
(b) the emf induced in the loop
5.067sin(140πt) V
(c) the current induced in the loop for a loop resistance of 2.50 Ω
2.03sin(140πt) A
(d) the power delivered to the loop
4.12sin2(140πt) W (wrong)
(e) the torque that must be exerted to rotate the loop
mN·m
Answer:
Explanation:
d )
power in an electrical loop = volt x current
= 5.067sin(140πt) x 2.03sin(140πt)
= 10.286 sin²(140πt) .
10.286 ( 1 - cos 280πt ) / 2
= 5.143 ( 1 - cos 280πt )
e )
Torque on a current carrying loop in a magnetic field
= M B sinθ
M is magnetic moment of coil , B is magnetic field , θ is angle between area vector of coil and direction of B .
Here magnetic moment of coil
= A i where A is area of coil and i is current .
= .12² x 2.03sin(140πt)
= .029 sin(140πt)
B = .8 T
MB = .8 x .029 sin(140πt)
= .0232 sin(140πt) x sin(140πt)
=.0232 sin²(140πt).
You are looking down on a single coil in a constant magnetic field B = 1.2 T which points directly into of the screen. The dimensions of the coil go from a = 8 cm and b = 17 cm, to a* = 16 cm and b* = 22 cm in t = 0.04 seconds. If the coil has resistance that remains constant at 1.2 ohms. What would be the magnitude of the induced current in amperes?
Answer:
The current is [tex]I = 0.5425 \ A[/tex]
Explanation:
From the question we are told that
The magnetic field is [tex]B = 1.2 \ T[/tex]
The first length is [tex]a = 8 \ cm = 0.08 \ m[/tex]
The second length is [tex]a^* = 16 \ cm = 0.16 \ m[/tex]
The first width is [tex]b = 17 \ cm = 0.17 \ m[/tex]
The second width is [tex]b^* = 22 \ cm = 0.22 \ m[/tex]
The time interval is [tex]dt = 0.04 \ s[/tex]
The resistance is [tex]R = 1.2 \ \Omega[/tex]
Generally the first area is
[tex]A = a * b[/tex]
=> [tex]A = 0.08 * 0.17[/tex]
=> [tex]A = 0.0136 \ m^2[/tex]
The second area is
[tex]A^* = a^* * b^*[/tex]
=> [tex]A^* = 0.16 * 0.22[/tex]
=> [tex]A^* = 0.0352 \ m^2[/tex]
Generally the induced emf is mathematically represented as
[tex]\epsilon = - \frac{ B * [A^* - A]}{dt}[/tex]
This negative show that it is moving in the opposite direction of the motion producing it
=> [tex]|\epsilon | = \frac{ 1.2 * [ 0.0352-0.0135]}{0.04}[/tex]
=> [tex]|\epsilon | = 0.651 \ V[/tex]
The induced current is
[tex]I = \frac{|\epsilon|}{R}[/tex]
=> [tex]I = \frac{ 0.651}{1.2}[/tex]
=> [tex]I = 0.5425 \ A[/tex]
A plane moves 100 meters to the right in two seconds. What is its velocity?
0 m/s
O 30 m/s
50 m/s
O 100 m/s
200 m/s
Answer:
50 m/s
Explanation:
[tex]Distance = 100m\\Time = 2 secs\\\\Velocity = \frac{Distance}{Time} \\\\V = \frac{100m}{2s} \\\\= 50m/s[/tex]
How far can a person run in 0.25hr if he or she runs at a average speed of 16km/he?
Answer:
4km
Explanation:
d = st
d=0.25*16
d=4km
Consider a vacuum-filled parallel plate capacitor (no dielectric material between the plates). What is the ratio of conduction current Jc to displacement current Jd at 10 MHz
Answer: 1798
Explanation:
Given that there is no dielectric material between the plates,
the permittivity of free space = 9 × 10^-12 f/m
The frequency F = 10 MHz
The ratio of conduction current JC to the displacement current Jd is also known as loss tangent.
Please find the attached file for the solution
When your scalpel gets dull or is broken, it should be disposed of by
a. Placing in the broken glass/sharps container
b. Thrown in the trash
c. Kept in your dissection kit
How many grams of water (H2O) have the same number of oxygen atoms as 7.0 mol of oxygen gas
Answer:
126 g of water, H2O.
Explanation:
First, we'll begin by calculating the number of atoms in 7 mole oxygen gas.
This is illustrated below:
From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.02×10²³ atoms. This means that 1 mole of O2 also contains 6.02×10²³ atoms.
Now, if 1 mole of O2 contains 6.02×10²³ atoms, then 7 moles of O2 will contain = 7 × 6.02×10²³ = 4.214×10²⁴ atoms.
Finally, we shall determine the mass of H2O that will contain 4.214×10²⁴ atoms.
This is illustrated below:
6.02×10²³ atoms is present in 1 mole of any substance contains
1 mole of H2O = (2x1) + 16 = 18 g
6.02×10²³ atoms is present in 18 g of H2O.
Therefore, 4.214×10²⁴ atoms will be present in = (4.214×10²⁴ × 18)/6.02×10²³
= 126 g of water, H2O.
Therefore, 126 g of water, H2O will contain the same number of oxygen atoms as 7.0 mol of oxygen gas.
7.0 mol of oxygen gas contain the same number of oxygen atoms as 250 g of water.
We want to know the mass of water (H₂O) that has the same number of oxygen atoms as 7.0 mol of oxygen gas (O₂).
First, we will calculate the number of oxygen atoms in 7.0 mol of O₂ considering the following relations.
1 mol of O₂ contains 6.02 × 10²³ molecules of O₂ (Avogadro's number).1 molecule of O₂ contains 2 atoms of O.[tex]7.0 mol O_2 \times \frac{6.02 \times 10^{23}molecule O_2 }{1molO_2} \times \frac{2atomO}{1molecule O_2} = 8.4 \times 10^{24} atomO[/tex]
Now, we want to calculate the mass of H₂O that contains 8.4 × 10²⁴ atoms of O. We will consider the following relations.
1 molecule of H₂O contains 1 atom of O.1 mol of H₂O contains 6.02 × 10²³ molecules of H₂O (Avogadro's number).The molar mass of H₂O is 18.02 g/mol.[tex]8.4 \times 10^{24} atomO \times \frac{1moleculeH_2O}{1atomO} \times \frac{1molH_2O}{6.02 \times 10^{23}moleculeH_2O } \times \frac{18.02gH_2O}{1molH_2O} = 250 gH_2O[/tex]
7.0 mol of oxygen gas contain the same number of oxygen atoms as 250 g of water.
Learn more about Avogadro's number here: https://brainly.com/question/1445383
What is the absolute pressure at a depth of 9.91 m below the surface of a deep lake? Assume atmospheric pressure is 1.01×105 Pa .
Answer:
P = 198.118 kPa
Explanation:
Given:
Atmospheric pressure = P[tex]_{atm\\}[/tex] = 1.01×10⁵
depth = h = 9.91 m
To find:
Absolute pressure P[tex]_{abs}[/tex]
Solution:
Density of water = ρ = 1.000x10 ³kg/m ³
acceleration due to gravity = ρ = 9.8 m/s²
P[tex]_{abs}[/tex] = P[tex]_{atm\\}[/tex] + ρgh
= 1.01×10⁵ + 1.000x10 ³x 9.8 x 9.91
= 101000 + 1000(9.8)(9.91)
= 101000 + 97118
= 198118 Pa
= 198.118 kPa
P[tex]_{abs}[/tex] = 198.118 kPa
The absolute pressure at a depth below the surface of this deep lake is 198.118 kPa.
Given the following data:
Atmospheric pressure = [tex]1.01 \times 10^5 \;Pa[/tex]Height (depth) = 9.91 meters.Scientific data:
Acceleration due to gravity = 9.8 [tex]m/s^2[/tex]Density of water = 1000 [tex]kg/m^3[/tex]To calculate the absolute pressure at a depth below the surface of a deep lake:
Mathematically, absolute pressure is given by this formula:
[tex]P_{abs} = P + \rho gh[/tex]
Substituting the given parameters into the formula, we have;
[tex]P_{abs} = 1.01 \times 10^5 + 1000 \times 9.8 \times 9.91 \\\\ P_{abs} = 101000+ 97118 \\\\[/tex]
Absolute pressure = 198118 Pa
Note: 1 kPa = 1000 Pa
Absolute pressure = 198.118 kPa
Read more on absolute pressure here: https://brainly.com/question/10013312
Two point charges totaling 8 μC exert a repulsive force of 0.15 N on one another when separated by 0.5 m. What is the charge on each? A. 4.0x10-6 C 4.0x10-6 C B. 7.4x10-6 C 0.6x10-6 C C. 6.6x10-6 C 1.4x10-6 C D. 5.0x10-6 C 3.0x10-6 C
Answer:
B. 7.4 x 10⁻⁶ C, 0.6 x 10⁻⁶ C
Explanation:
From Coulomb's Law the electrostatic repulsive force is given by the following formula:
F = kq₁q₂/r²
where,
F = Repulsive Force = 0.15 N
k = Coulomb's Constant = 9 x 10⁹ N.m²/C²
q₁ = Magnitude of 1st Charge = ?
q₂ = Magnitude of 2nd Charge = ?
r = Distance between Charges = 0.5 m
Therefore,
0.15 N = (9 x 10⁹ N.m²/C²)q₁q₂/(0.5 m)²
q₁q₂ = (0.15 N)(0.5 m)²/(9 x 10⁹ N.m²/C²)
q₁q₂ = 4.17 x 10⁻¹²
q₁ = (4.17 x 10⁻¹²)/q₂ -------------------- equation (1)
The sum of charges is given as:
q₁ + q₂ = 8 μC
q₁ + q₂ = 8 x 10⁻⁶
using equation (1):
(4.17 x 10⁻¹²)/q₂ + q₂ = 8 x 10⁻⁶
(4.17 x 10⁻¹²) + q₂² = 8 x 10⁻⁶ q₂
q₂² - (8 x 10⁻⁶) q₂ + (4.17 x 10⁻¹²) = 0
Solving this quadratic equation:
q₂ = 7.4 x 10⁻⁶ C (OR) q₂ = 0.56 x 10⁻⁶ C
q₂ = 7.4 μC (OR) q₂ = 0.6 μC
Therefore,
q₁ = (4.17 x 10⁻¹² C)/(7.4 x 10⁻⁶ C)
q₁ = 0.6μC
Now, if we solve with q₂ = 0.6 μC, we will get q₁ = 7.4 μC.
Therefore, the correct option will be:
B. 7.4 x 10⁻⁶ C, 0.6 x 10⁻⁶ C
Which describes the amplitude of a wave when it carries more ene
O It is higher.
O It is lower.
It is darker.
Oli is lighter
Answer:
It is higher.
Explanation:
Hello,
In this case, the quantity of energy that a wave is able to transfer is directly related its amplitude exhibiting that the higher the carried energy, the higher its amplitude and on the flip side, the lower the energy the lower the amplitude, therefore, the answer is it is higher. You can verify this on the attached picture.
Regards.
Answer:
It is higher.
Explanation:
You have been asked to design a can with a volume of 672cm3 that is shaped like a right circular cylinder. The can will have a closed top. What radius r and height h, in centimeters, would minimize the amount of material needed to construct this can
Answer:
r = 4.747 cm and h = 9.4925 cm
Explanation:
We know that volume of a cylinder is given as:
V = πr²h
Also, surface area is given as;
S = 2πr² + 2πrh
Where r is radius and h is height
Now, we are told that the volume is 672 cm³
Thus, πr²h = 672
Making h the subject gives;
h = 672/πr²
Putting 672/πr² for h in the surface area equation gives;
S = 2πr² + 2πr(672/πr²)
Factorizing gives;
S = 2π[r² + 672/πr]
Differentiating to get first derivative gives;
S' = 2π[2r - (672/πr²)]
Equating to zero gives;
2π[2r - (672/πr²)] = 0
4πr - 1344/r² = 0
4πr = 1344/r²
r³ = 1344/4π
r³ = 106.95212175775
r = ∛106.95212175775
r = 4.747 cm
So, since h = 672/πr²
Then, h = 672/π(4.747)²
h = 9.4925 cm
1) A cyclist moves a distance of 2000 meters during a time of 20 minutes. How fast is the cyclist?
2) A car moves for 20 minutes on a road with constant speed. If he traveled 60 kilometers, what is his speed?
Answer:
1) speed of a cyclist = 100 m/min.
2) speed of a car moving = 3 km/min.
Explanation:
1) speed of a cyclist = distance over time
= 2000 m / 20 min
= 100 m/min.
2) speed of car moving = distance over time
= 60 km / 20 min
= 3 km/min.
For a conductor in electrostatic equilibrium, which of the following properties are true?
a) Any excess charge is uniformly spread throughout the volume of the conductor.
b) The electric field inside is zero.
c) The entire conductor is at the same potential.
Answer:
b) The electric field inside is zero.
Explanation:
This is simply because the charges in the field will be in motion, thus this charges kind of spread around to make the conductor field zero.
Yang can focus on objects 150 cm away with a relaxed eye. With full accommodation, she can focus on objects 20 cm away. After her eyesight is corrected for distance vision, what will her near point be while wearing her glasses?
Answer:
Explanation:
Without wearing glasses , her near point is 20 cm .
for correction of eye
u = infinity ,
v = - 150 cm
f = ?
[tex]\frac{1}{v} -\frac{1}{u} = \frac{1}{f }[/tex]
[tex]\frac{1}{-150} -0 = \frac{1}{f }\\[/tex]
f = - 150 cm
He must be wearing glass of focal length of 150 cm .
If near point be x after wearing glass ,
u = x
v = - 20 cm
f = - 150 cm
[tex]\frac{1}{v} -\frac{1}{u} = \frac{1}{f }[/tex]
[tex]\frac{1}{-20} -\frac{1}{x} = \frac{1}{-150 }[/tex]
[tex]\frac{1}{-20} + \frac{1}{150 }= \frac{1}{x}[/tex]
x = 23 cm .
While wearing the glasses, Yang's near point will be 23.08 cm.
Given information:
Yang can focus on objects 150 cm away with a relaxed eye.
With full accommodation, she can focus on objects 20 cm away.
For correction, we have to use a concave lens such that it can make the image of a distant object at 150 cm.
So, the object distance will be infinity, and the image distance will be [tex]v=-150[/tex] cm.
So, the focal length of the lens can be calculated by lens formula as,
[tex]\dfrac{1}{v}-\dfrac{1}{u}=\dfrac{1}{f}\\\dfrac{1}{-150}-\dfrac{1}{\infty}=\dfrac{1}{f}\\f=-150\rm\;cm[/tex]
Now, after using the lens, the image distance will be [tex]v=-20[/tex] cm. Let u be the near point.
The near point, after correction, can be calculated as,
[tex]\dfrac{1}{v}-\dfrac{1}{u}=\dfrac{1}{f}\\\dfrac{1}{-20}-\dfrac{1}{u}=\dfrac{1}{-150}\\\dfrac{1}{u}=\dfrac{1}{150}-\dfrac{1}{20}\\u=23.08\rm\; cm[/tex]
Therefore, while wearing the glasses, Yang's near point will be 23.08 cm.
For more details, refer to the ink:
https://brainly.com/question/4419161
The x component of vector is 8.7 units, and its y component is -6.5 units. The magnitude of is closest to
Answer:
F = 10.86 units
Explanation:
The magnitude of a vector in terms of the magnitude of its rectangular components is given by the following formula:
F = √(Fₓ² + Fy²)
where,
F = Magnitude of the Vector = ?
Fₓ = magnitude of the x-component of vector = 8.7 units
Fy = magnitude of y component of vector = - 6.5 units
Therefore, using these values in the equation, we get:
F = √[(8.7 units)² + (- 6.5 units)²]
F = √(117.94 units²)
F = 10.86 units
A monatomic gas is adiabatically compressed to 0.250 of its initial volume. Do each of the following quantities change?
A) What is rms speed?
B) What is the mean free path?
C) What is the thermal energy of gas?
D) What is the molar specific at a constant volume?
Answer:
Given that
V2/V1= 0.25
And we know that in adiabatic process
TV^န-1= constant
So
T1/T2=( V1 /V2)^ န-1
So = ( 1/0.25)^ 0.66= 2.5
Also PV^န= constant
So P1/P2= (V2/V1)^န
= (1/0.25)^1.66 = 9.98
A. RMS speed is
Vrms= √ 3RT/M
But this is also
Vrms 2/Vrms1= (√T2/T1)
Vrms2=√2.5= 1.6vrms1
B.
Lambda=V/4π√2πr²N
So
Lambda 2/lambda 1= V2/V1 = 0.25
So the mean free path can be inferred to be 0.25 times the first mean free path
C. Using
Eth= 3/2KT
So Eth2/Eth1= T2/T1
So
Eth2= 2.5Eth1
D.
Using CV= 3/2R
Cvf= Cvi
So molar specific heat constant does not change
The rms speed of the system is 1.6 while Mean free path is 0.25 times the first mean free path.
Given that
[tex]\bold{\dfrac {V_2}{V_1}= 0.25}[/tex]
In adiabatic process
[tex]\bold {TV^\gamma^-^1}[/tex]= constant
So
[tex]\bold {\dfrac {T1}{T2}=(\dfrac {V1 }{V2})^ \gamma^-^1}}\\[/tex]
So,
[tex]\bold {\dfrac {T_1} {T_2} = (\dfrac { 1}{0.25})^ 0^.^6^6= 2.5}[/tex]
for pressure,
[tex]\bold {PV^\gamma = \ Constant }[/tex]
So
[tex]\bold {\dfrac {P1}{P2}=(\dfrac {V1 }{V2})^ \gamma}}\\\\\bold {\dfrac {P1}{P2}=(\dfrac {1}{0.25})^ 0^.^6^6} = 9.98 } }[/tex]
A. rms speed can be calculated as
[tex]\bold {\dfrac {Vrms 2}{Vrms1}= \sqrt {T2T1})}\\\\\bold {Vrms2 =\sqrt {2.5} = 1.6\ Vrms1 }[/tex]
B. The mean free path can be calculated as
[tex]\bold {\dfrac {\lambda_1 }{\lambda_2} = \dfrac {V_1}{V_2} = 0.25 \\ }[/tex]
Mean free path is 0.25 times the first mean free path.
C.
[tex]\bold {Eth= \dfrac {3}{2}kT}}\\\\\bold {\dfrac {E_t2}{E_t1} = \dfrac {T_2}{T_1}}\\\\\bold {E_t2= 2.5\ E_t1}[/tex]
D. the molar specific at a constant volume can be calculated a using,
[tex]\bold {CV= \dfrac 3{2}R }[/tex]
[tex]\bold {Cv_f= Cv_i }[/tex]
So, molar specific heat constant will not change.
Therefore, the rms speed of the system is 1.6 while Mean free path is 0.25 times the first mean free path.
To know more about adiabatic processes,
https://brainly.com/question/14930930
With what speed must a ball be thrown vertically from ground level to rise to a maximum height of 41 m
Answer:
The speed must a ball be thrown vertically from ground level to rise to a maximum height is 28.35 m/s.
Explanation:
Given;
maximum vertical height of the throw, H = 41 m
Apply the following kinematic equation;
V² = U² + 2gH
where;
V is the final speed with which the ball will rise to a maximum height
U is the initial speed of the ball = 0
g is acceleration due to gravity = 0
V² = U² + 2gH
V² = 0² + 2gH
V² = 2gH
V = √2gH
V = √(2 x 9.8 x 41)
V = 28.35 m/s
Therefore, the speed must a ball be thrown vertically from ground level to rise to a maximum height is 28.35 m/s.
If your front lawn is 21.0 feet wide and 20.0 feet long, and each square foot of lawn accumulates 1350 new snowflakes every minute, how much snow, in kilograms, accumulates on your lawn per hour
Answer:
Mass of flake = 67.716 kg
Explanation:
Given:
Length of lawn = 21 ft
Width of lawn = 20 ft
Note:
Each snow flake mass = 1.90 mg
Find:
Weight of total flake in a minute
Computation:
Area of lawn = 21 × 22
Area of lawn = 440 ft²
Amount of flake per minute = 440 × 1350
Amount of flake per minute = 594000 flake/ minutes
Mass of flake = 594000 × 1.90 mg × 60 minutes
Mass of flake = 67,716,000 mg
Mass of flake = 67.716 kg
A family made the observation that more expensive brands of popcorn seem to produce more popped kernels than cheaper brands of popcorn. In order to test this hypothesis, the family conducted an experiment in which they followed the procedures below: The family bought 2 differing brands of popcorn to test: Wilbur Bockenreder Popcorn and PopWhisper. They measured 1 cup of kernels and popped 5 bowls of each type of popcorn. They ensured they popped the popcorn for the same amount of time, used the same wattage microwave, and did not have any other ingredients added to the kernels (butter, etc). They counted and recorded the number of unpopped kernels in each of the 10 bowls. As they analyzed the data collected, they were able to conclude that their initial hypothesis was supported. They formed the conclusion that the more expensive brand of popcorn popped more kernels than the cheaper brand of popcorn. From this experiment, let's answer some questions. Identify the independent variable.
Answer:
The different types of corn used.
Explanation:
Independent variable: In research methods, the term "independent variable" is determined as a variable that is being manipulated, changed, or altered in an experiment by the experimenter in order to see its effect on the dependent variable. The changes in the dependent variable in an experiment depends on the independent variable directly.
The independent variable in the popcorn experiment is brand of popcorn used.
INDEPENDENT VARIABLE:Independent variable in an experiment is the variable that the experimenter changes or manipulates in order to bring about a response. According to this question, a family is conducting an experiment to test which brand of popcorn seem to produce more popped kernels. They used two brands of popcorn as follows: Wilbur Bockenreder Popcorn and PopWhisper.However, the brand of popcorn was changed in this experiment, hence, the brand of the popcorn is the independent variable.
Learn more about independent variable at: https://brainly.com/question/967776