Answer: b) a chemical reaction between carbohydrates and oxygen to produce carbon dioxide, water, and heat energy
Explanation:
Based on the options, I assume that this is talking about the process of respiration. Respiration allows living things to produce energy by reacting carbohydrates with oxygen.
This results in the release of energy in the form of heat in a cell and also the formation of carbon dioxide and water. This type of respiration is known as Aerobic respiration.
A balloon, inflated in an air-conditioned room at 27.0°C, has a volume
of 4.50.L. It is heated to a temperature of 57.0°C. What is the new
volume of the balloon if the pressure remains constant?
Answer:
4.95L
Explanation:
Using Charle's law equation;
V1/T1 = V2/T2
Where;
V1 = initial volume (L)
V2 = final volume (L)
T1 = initial temperature (K)
T2 = final temperature (K)
According to the question, the following information was given:
V1 = 4.50L
V2 = ?
T1 = 27°C = 27 + 273 = 300K
T2 = 57°C = 57 + 273 = 330K
Using V1/T1 = V2/T2
4.50/300 = V2/330
Cross multiply
300 × V2 = 4.5 × 330
300V2 = 1485
V2 = 1485 ÷ 300
V2 = 4.95L
Oxygen is a diatomic element.why give reason.
Answer:
Diatomic molecules contain two atoms that are chemically bonded. If the two atoms are identical, as in, for example, the oxygen molecule (O2), they compose a homonuclear diatomic molecule, while if the atoms are different, as in the carbon monoxide molecule (CO), they make up…
Explanation:
yei hoo arko aaxaina ...
this symbol (g) in a chemical formula indicates that
Answer:
indicates that the substance is in a gaseous state
A student distills a sample of ink. Devise a simple method to show that the liquid collected is pure water. Include the expected results in your answer.
Answer:
Distillation
Explanation:
Water vaporizes at lower temperature than the ink pigment so if you heat them, the water evaporates, leaving the ink pigment in the flask
Will Mark Brainlest ( all the disaster are hazard but all the hazard are not disaster) give reason
Answer:
Explanation to the following question is as follows;
Explanation:
Any phenomenon that would have the potential to cause severe death or property damage is considered a danger. When the potential for devastation is realised, a hazard becomes a disaster. All catastrophes are risks, but not all risks are catastrophes. Hazards do not always result in devastation.
Answer:
I hope this will help you.
Which of the following happens during an endothermic chemical change?
Heat is absorbed.
Heat is released.
Net energy decreases.
Net energy remains constant.
Answer:
Heat is absorbed.
Explanation:
Endothermic reactions: Heat is absorbed.
When there is a change in the endothermic chemical so here heat is absorbed.
What are Endothermic reactions?It is the type of the chemical reaction that absorbed the heat from the environment. The absorbed energy that gives the activation energy for the reaction to arise.
hence, When there is a change in the endothermic chemical so here heat is absorbed.
Therefore, the first option is correct.
Learn more about heat here: https://brainly.com/question/1488118
The field around a negatively charged object is symbolized by vectors pointing toward the sphere because a test charge, which is ______ by definition, would travel along such a vector if released in the field.
Positive
Negative
Answer:
Positive
Explanation:
what is 10x412x3021x13123
O2 oxygen is diatomicO + O O=O Double Bond
Answer:
O 100
Explanation:
The mass of a boy is 60 kg. Calculate his weight if the value of g is 9.8 ms2
Answer:
Weight = mass × gravitational
Weight = 60 kg × 9.8 ms²
= 588 N
Explanation:
hope it helps
Weight of the boy = Mass of the boy × g
= 60 × 9.8
= 588kgm/s²
= 588N
Wood is made mostly of cellulose and has a chemical formula of C.H.00. Which of the following equations
represents the cellulose combustion reaction?
Answer:
Option B.
C₆H₁₀O₅ + 6O₂ —> 6CO₂ + 5H₂O
Explanation:
To know which option is correct, we shall write the balanced equation for the combustion of cellulose. This is illustrated below:
C₆H₁₀O₅ + O₂ —> CO₂ + H₂O
There are 6 atoms of C on the left side and 1 atom on the right side. It can be balance by writing 6 before CO₂ as shown below:
C₆H₁₀O₅ + O₂ —> 6CO₂ + H₂O
There are 10 atoms of H on the left side and 2 atoms on the right side. It can be balance by writing 5 before H₂O as shown below:
C₆H₁₀O₅ + O₂ —> 6CO₂ + 5H₂O
There are a total of 7 atoms of O on the left side and a total of 17 atoms on the right side. It can be balance by writing 6 before O₂ as shown below:
C₆H₁₀O₅ + 6O₂ —> 6CO₂ + 5H₂O
Now, the equation is balanced.
Thus, option B gives the correct answer to the question.
Calculate the molecular weight of a dibasic acid.0.56gm of which is required 250ml of N/20 sodium hydroxide solution for neutralization.
Answer: The molecular weight of the dibasic acid is 89.6 g/mol
Explanation:
Normality is defined as the amount of solute expressed in the number of gram equivalents present per liter of solution. The units of normality are eq/L. The formula used to calculate normality:
[tex]\text{Normality}=\frac{\text{Given mass of solute}\times 1000}{\text{Equivalent mass of solute}\times \text{Volume of solution (mL)}}[/tex] ....(1)
We are given:
Normality of solution = [tex]\frac{1}{20}=0.05N[/tex]
Given mass of solute = 0.56 g
Volume of solution = 250 mL
Putting values in equation 1, we get:
[tex]0.05=\frac{0.56\times 1000}{\text{Equivalent mass of solute}\times 250}\\\\\text{Equivalent mass of solute}=\frac{0.56\times 1000}{0.05\times 250}=44.8g/eq[/tex]
Equivalent weight of an acid is calculated by using the equation:
[tex]\text{Equivalent weight}=\frac{\text{Molar mass}}{\text{Basicity}}[/tex] .....(2)
Equivalent weight of acid = 44.8 g/eq
Basicity of an acid = 2 eq/mol
Putting values in equation 2, we get:
[tex]44.8g/eq=\frac{\text{Molar mass}}{2eq/mol}\\\\\text{Molar mass}=(44.8g/eq\times 2eq/mol)=89.6g/mol[/tex]
Hence, the molecular weight of the dibasic acid is 89.6 g/mol
What two elements were named after the United States?
As a pure element the oxidation number of zinc is ________, but in compounds such as ZnCO3 its oxidation number is ________. Group of answer choices
Answer:
0, +2
Explanation:
As a pure element, any element or simple compound has an oxidation number of 0. This makes it a lot easier, and can be applied for almost any element or compound that uses one atom, like F2, O3, Zn, Fe, etc. However, in compounds, Zinc's oxidation number tends to be +2, and this is just a rule that I memorized when I learned this topic. Please let me know if you still need help and I hope you understood!
As a pure element, the oxidation number of zinc is zero, but in compounds such as [tex]ZnCO_3\\[/tex] its oxidation number is +2.
What is the oxidation number?Oxidation number also called oxidation state, is the total number of electrons that an atom either gains or loses in order to form a chemical bond with another atom.
As a pure element, any element or simple compound has an oxidation number of 0. This makes it a lot easier and can be applied for almost any element or compound that uses one atom, like [tex]F_2[/tex], [tex]O_3[/tex], Zn, Fe, etc.
However, in compounds, Zinc's oxidation number tends to be +2.
Learn more about the oxidation number here:
https://brainly.com/question/10079361
#SPJ2
The reaction below shows how the potential energy changes during a phase
change. What does the red arrow show?
Potential Energy
Reaction Progress
A. The change in enthalpy is positive, and the reaction is
endothermic.
B. The change in enthalpy is negative, and the reaction is exothermic.
C. The activation energy is negative, and the reaction is exothermic.
D. The activation energy is positive, and the reaction is endothermic.
Answer:
the red arrow shows that the change in enthalpy is positive
From the energy diagram, it is clear that, the enthalpy of the reaction is positive and it is an endothermic reaction.
What is an endothermic reaction ?An endothermic reaction is a chemical reaction that absorbs heat from its surroundings, resulting in a decrease in temperature of the surroundings. In other words, energy is taken in by the reaction from the environment.
During an endothermic reaction, the reactants absorb energy in the form of heat, light, or electricity to break the bonds between their atoms and form new bonds to create products.
The amount of energy absorbed by the reactants is greater than the energy released by the products. This energy difference is usually expressed as the enthalpy change (∆H) of the reaction, which is positive for endothermic reactions.
Here, the energy of products is higher than that of reactants and hence option A is correct.
Find more on endothermic reaction:
https://brainly.com/question/2264325
#SPJ7
A toy plane has a mass of 2.5kg and is 18 m above the ground. It is moving 4.5 m/s.
how much mechanical energy does the toy have?
A. 416J
B. 441J
C. 466J
D. 491J
Answer:
466J (c)
Explanation:
Mechanical Energy= Kinetic+Potential
Potential energy= mgh
Plug in givens
mgh=2.5*18*9.8=441J
Kinetic Energy = 1/2mv^2
Plug in givens
1/2mv^2= 1/2(2.5)(4.5)^2= 25.3125J
Mechanical energy= 441J+25.3125J=466.3125J or 466J
Nitrogen dioxide gas is dark brown in color and remains in equilibrium with dinitrogen tetroxide gas, which is colorless.
2NO2(g) ⇌ N2O4(g)
When a light brown colored mixture of the two gases at equilibrium was moved from room temperature to a higher temperature, the mixture turned dark brown in color.
Which of the following conclusions about this equilibrium mixture is true?
This reaction is exothermic because the system shifted to the left on heating.
This reaction is exothermic because the system shifted to the right on heating.
This reaction is endothermic because the system shifted to the left on heating.
This reaction is endothermic because the system shifted to the right on heating.
Answer:
This reaction is exothermic because the system shifted to the left on heating.
Explanation:
2NO₂ (g) ⇌ N₂O₄(g)
Reactant => NO₂ (dark brown in color)
Product => N₂O₄ (colorless)
From the question given above, we were told that when the reaction at equilibrium was moved from room temperature to a higher temperature, the mixture turned dark brown in color.
This simply means that the reaction does not like heat. Hence the reaction is exothermic reaction.
Also, we can see that when the temperature was increased, the reaction turned dark brown in color indicating that the increase in the temperature favors the backward reaction (i.e the equilibrium shift to the left) as NO₂ which is the reactant is dark brown in color. This again indicates that the reaction is exothermic because an increase in the temperature of an exothermic reaction will shift the equilibrium position to the left.
Therefore, we can conclude that:
The reaction is exothermic because the system shifted to the left on heating.
The reaction is exothermic and the equilibrium position shifted to the left hand side.
An exothermic reaction is one in which heat is given out. Hence, the equilibrium position moves towards the left when the temperature is increased in an exothermic reaction.
Given the reaction, 2NO2(g) ⇌ N2O4(g) the appearance of a dark brown gas at high temperature implies that the reaction is exothermic and the equilibrium position shifted to the left hand side.
Learn more about exothermic reaction: https://brainly.com/question/15308590
b.__________________ Properties of elements repeat in a regular way as the atomic numbers increase.
What are the uses of iron and it's reasons.
Answer:
Uses of iron
It is used to manufacture steel and also used in civil engineering like reinforced concrete, girders etc. Iron is used to make alloy steels like carbon steels with additives such as nickel, chromium, vanadium, tungsten, and manganese.
Answer:
iron is used to make water pipes.
used for making machines in industries.
used for making steam engine.
How many GRAMS of fluorine are present in 5.35×1022 molecules of boron trifluoride?
True or false, The atomic number of an element is a whole number that decreases as you read across each row of
the periodic table from left to right.
what are condition for formation of electrovalent bond
Answer:
The conditions for the formation of an electrovalent bond are as follows: The atom which changes into cation (+ ive ion) should possess 1,2 or 3 valency electrons. It will loose these electrons to form cation with +1,+2 or +3 charge
What element on the periodic table has 5 protons, 5 electrons, and 5 neutrons?
Answer:
Boron
Explanation:
this is your answer
what is the [h+] if the ph of a solution is 11.13
pls help
Explanation:
[tex][{H}^{ + }] = {10}^{ - pH} [/tex]
[tex] = {10}^{ - 11.13} [/tex]
[tex] = {10}^{ (- 11 - 0.13)} [/tex]
[tex] = {10}^{ - 0.13} \times {10}^{ - 11} [/tex]
[tex] = 0.741 \times {10}^{ - 11} \frac{mol}{litre} [/tex]
HOPE IT HELPS YOUCan someone please do 5, 6, 8, 10
The weight of an object _____.
a) is always the same
b) depends on its location
c) is not affected by gravity
d) is the same as its mass
Answer:
c
Explanation:
and that's bc it will not share stay the same
air is made up of different gasses such as oxygen nitrogen and carbon dioxide. which statement best describes these three components of air?
-they are all classified as pure substances
-they cannot react with another substance
-they are chemically bonded to one another
-they can be classified as elements
Answer:
They are chemically bonded to one another
Answer:
they can be classified as elements
What is the frequency of an electromagnetic wave with a wavelength of 1.0 x 10' m?
a. 3.3 x 104 Hz
1.0 x 101 Hz
b. 3.0 x 10 Hz
d. 3.0 x 103 Hz
c.3.0 x 103 Hz
How could the experiment be changed to allow for a result to be shown for the insoluble food
colouring?
Answer:
no lo se yo hablo en español no en ingles
Methane is approximately 23 times more powerful than carbon dioxide as a greenhouse gas. Which are significant sources of methane emissions
Answer:
anthropogenic sources like landfills, agricultural activities,coal mining and combustion and some sources are natural ones