(a). suppose you are going to transmit a packet over osi network model. explain the working of router, gateway and switch. which device will be used if you face an issue of weak signals during transmission? also, mention on which level of osi model these devices will work efficiently. (b). attenuation, distortion and noise are the causes of transmission impairment. what would be the solution or how these causes can be improved.

Answers

Answer 1

Answer:

Step 1:

OSI stands for Open Systems Interconnection.

OSI model was developed by the International Organization for Standardization(ISO). It is a reference model for how applications communicate over a network. The OSI model characterizes computing functions into a universal set of rules and requirements in order to support interoperability between different products and software.

The OSI model can be considered as a universal language for computer networking. It is based on the concept of divide and conquers, it splits up the communication system into 7 abstract layers, and the layer is stacked upon the previous layer.

Layers of OSI Model:

OSI model has seven layers which are as follows:

The Physical LayerThe Data Link LayerThe Network LayerThe Transport LayerThe Session LayerThe Presentation LayerThe Application Layer

Step 2

Routers – A router is a device like a switch that routes data packets based on their IP addresses. Router is mainly a Network Layer device. Routers normally connect LANs and WANs together and have a dynamically updating routing table based on which they make decisions on routing the data packets. Router divide broadcast domains of hosts connected through it.

Gateway – A gateway, as the name suggests, is a passage to connect two networks together that may work upon different networking models. They basically work as the messenger agents that take data from one system, interpret it, and transfer it to another system. Gateways are also called protocol converters and can operate at any network layer. Gateways are generally more complex than switch or router.

Switch – A switch is a multiport bridge with a buffer and a design that can boost its efficiency(a large number of ports imply less traffic) and performance. A switch is a data link layer device. The switch can perform error checking before forwarding data, that makes it very efficient as it does not forward packets that have errors and forward good packets selectively to correct port only. In other words, switch divides collision domain of hosts, but broadcast domain remains same.

Which device will be used if you face an issue of weak signals during transmission.

Router device will be useful mostly for issue of weak signals during transmissin.

Mention on which level of OSI model these devices will work efficiently.

All these three devices router, gateway and switch work efficiently at hardware layers such as physical layer, datalink layer and network layer.

Step 3

Transmission impairment:

In the data communication system, analog and digital signals go through the transmission medium. Transmission media are not ideal. There are some imperfections in transmission mediums. So, the signals sent through the transmission medium are also not perfect. This imperfection cause signal impairment.

It means that signals that are transmitted at the beginning of the medium are not the same as the signals that are received at the end of the medium that is what is sent is not what is received. These impairments tend to deteriorate the quality of analog and digital signals.

There are three main causes of impairment are,

Attenuation

Distortion

Noise

1.Attenuation:

Here attenuation Means loss of energy that is the weaker signal. Whenever a signal transmitted through a medium it loses its energy, so that it can overcome by the resistance of the medium.

That is why a wire carrying electrical signals gets warm, if not hot, after a while. Some of the electrical energy is converted to heat in the signal.

Amplifiers are used to amplify the signals to compensate for this loss.

2.Distortion:

If a signal changes its form or shape, it is referred to as distortion. Signals made up of different frequencies are composite signals. Distortion occurs in these composite signals.

Each component of frequency has its propagation speed traveling through a medium and therefore, different components have different delay in arriving at the final destination.

It means that signals have different phases at the receiver than they did at the source.

3. Noise:

Noise is another problem. There are some random or unwanted signals mix up with the original signal is called noise. Noises can corrupt the signals in many ways along with the distortion introduced by the transmission media.

Noise may be divided into four categories:

Thermal noiseIntermediation noiseCrosstalkImpulse noise


Related Questions

5. Which part regulates the amount of light that passes up toward the eyepiece?
A. stage
C. diaphragm
B.eyepiece
D. revolving nosepiece
the tot​

Answers

Answer:

C. diaphragm

Explanation:

Microscope is very important instrument in biology and use to magnify the specimen or other biological objects.

Eyepiece, stage, diaphragm and  revolving nosepiece are some of the important part of the microscope with different functions. such as Eyepiece carry the Ocular lens that helps to look the specimen, stage allows light to pass through, diaphragm regulates the amount of light reaches the eyepiece, and revolving nosepiece are use to change magnification.

So, Diaphragm controls the light that passes up toward the eyepiece and help in viewing the specimen. Diaphragm is located below the stage and above the condenser.

Hence, the correct answer is "C. diaphragm".

Answer:

C. Diaphragm is the answer.

Explanation:

#Bonjour

Please help

Measure the thickness of a razor blade using a vernier caliper and screw gauge. What is the lowest count of these instruments? Which measuring
Instrument is more accurate? You can take multiple blades and stack them together, then measure thickness, and find out the average thickness.

Answers

Answer:

Is this question related to computers and technology?

[4]
) Describe what is involved in the clearing of bank cheques which the bank has collected in the
course of the day.


Plz any answer need it quickly help me if you know

Answers

Answer:

The clearing process begins with the deposit of a cheque in a bank. ... The cheque is passed for payment if the funds are available and the banker is satisfied about the genuineness of the instrument. The cheques that are unpaid are returned to the presenting bank through another clearing called the Return Clearing.

hopes this helps you?????????

Explanation:

What are the factors that affect self-confidence?

Answers

Answer:

The factors that affect self confidence are not having enough faith in yourself and letting what others say about you put you down

Explanation:

Plz mark brainlest it will help me so much

What function does a resource manager in an IDE perform?

A. It's an interface for viewing and organizing files.
B. It's an interface for integrating text and multimedia into a website.
C. It's an environment for tracing and fixing the errors in the source code.
D. It's an environment for running and testing the source code.
E. It's an interface for creating and editing the source code.

Answers

Answer:

I would say D) Its an enviroment for running and testing the source code.

Explanation:

An integrated development environment (IDE) is a software suite that consolidates basic tools required to write and test software.

Developers use numerous tools throughout software code creation, building and testing. Development tools often include text editors, code libraries, compilers and test platforms. Without an IDE, a developer must select, deploy, integrate and manage all of these tools separately. An IDE brings many of those development-related tools together as a single framework, application or service. The integrated toolset is designed to simplify software development and can identify and minimize coding mistakes and typos.

Some IDEs are open source, while others are commercial offerings. An IDE can be a standalone application or it can be part of a larger package.

Answer:

D. It's an environment for running and testing the source code.

Explanation: plato 2023

What are Layers in computer class 7. no scams please​

Answers

Answer:

It means and organisation programming into separate functional components that interact in some sequential and hierarchical way, with each layer usually having an interface only to the layer above it and the layer below it.

Wiliam would like to sort a list of items after the data is already entered
Which method is NOT an available sort option?
number
date
text
symbol

Answers

Answer symbol

Explanation:

Symbol is not an available sort option.

in your own words, explain the FNAF timeline

Answers

Answer:

see shawty problem is, I havent had that phase yet, my cousin would be able to answer this tho

Answer:

God it would take me over a week to type my timeline out-

which of the following can be represented by a sequence of bits. 1. An integer 2. An alphanumeric character 3. A machine language instruction

Answers

Answer:

all of them

Explanation:

In a computer program, this is how numbers, text and program instructions are stored.

What is the difference between the casual and consultative conversation? Why is it important for a person to know the difference between the two?​

Answers

Answer:

The answer is below

Explanation:

Casual conversation is a form of conversation that occurs between friends and families. There are no specific rules or manner in which the participants speak to each other. It is otherwise known as Informal Conversation.

Consultative conversation on the other hand is a form of conversation that occurs between people who have a close relationship but not actual friends or families.

For example, people involved in this type of conversation are the likes of Doctors and Patients, Counsellors and Students, etc. It is often considered a Semi-formal conversation.

The reason a person needs to know the difference between the two styles of conversation is for individuals to know how to present and conduct themselves appropriately during the conversation.

Which Creative Commons license type allows others to use and build upon work non-commercially, provided that they credit original author and maintain the same licensing?

Answers

Answer:

Creative Commons license type allows others to use and build upon work non-commercially, provided that they credit original author and maintain the same licensing is described below in detail.

Explanation:

Attribution-Non financially-ShareAlike

This permission lets others adapt, remix, and develop upon your work non-financially, as long as they charge you and license their new inventions under identical times. There are six separate license classes, scheduled from most to least licensed. the material in any mechanism or arrangement, so long as attribution is given to the originator.

47. Which of these examples demonstrates good netiquette?
Typing a comment on a video detailing how boring and poorly made it is.

A-Sending an email without a salutation or a signature.

B-Posting a blog article about how stuck-up your peers are.

C-Being straightforward and truthful in all electronic communications.

Answers

Answer:

typing it, on a video detailing how boring and poorly made it is

Explanation:

this is an example of good netiquette because they are criticizing the video game and what good netiquette is is making a comment relevant to the original message. the original message being the video game

Match the definition with the keyword it represents

1. Extra funds set aside beyond those necessary to cover operating expenses

2. Basic reasoning for an organization’s existence

3. Interfering in someone’s life for the purpose of saving him or her from risky behavior that could lead to death


A. philosophy or mission statement

B. intervention

C. prudent reserve

Answers

Answer:

1. C

2. A

3. B

Explanation:

1. Prudent reserve: these are extra funds set aside beyond those necessary to cover operating expenses. The main reason for having a prudent reserve is to provide funds to take care of any emergency or unforeseen expenses.

2. Philosophy or mission statement: Basic reasoning for an organization’s existence. This is the fundamental building block on which an organization is founded on and as such it sets the direction for the organization.

3. Intervention: Interfering in someone’s life for the purpose of saving him or her from risky behavior that could lead to death. An intervention typically comes from a superior or guardian and it could be in various forms such as cash, advice, mentorship, admonition, prayers or protection.

Answer:

The person above me is right.

Explanation:

this site isn't letting me add my ans and wut should I do?

Answers

You can probably refresh or log out or something.

What is the difference, if any, between a social media strategist and a social media specialist?

A. They are very similar occupations, except that social media specialists tend to have more training.

B. A social media strategist determines how an organization will maintain a social media presence, and the specialist creates the content.

C. There is no difference—these are the same job with slightly different titles.

D. A social media specialist determines how an organization will maintain a social media presence, and the strategist creates the content.

Thank you!

Answers

The answer is D you welcome :D

A social media strategist is an expert who is involved in determining the presence of an organization over the social media; whereas, a specialist is involved in creating the content for social media.

What is social media?

The use of computer networks and internet for the purpose of sharing and expressing one's views with the connections over such platform is known as a social media.

A social media strategist, for an organization, will be involved in maintenance of the social media activeness of the organization; whereas, the content for such presence is in the hands of a specialist.

Hence, option B holds true regarding the roles of handling social media of an organization.

Learn more about social media here:

https://brainly.com/question/18958181

#SPJ2

Write a program to allow user to perform any of these list operation given in a menu. The menu is: a) Append an element b) Insert an element c) Modify an existing element d) Delete an existing element with a given value e) Sort the list in descending order f) Display the list.

Answers

Answer:

c

Explanation:

Which of the following is an event handler?

scanning a credit card when you shop

displaying a message

clicking a mouse button

moving a mouse

Answers

That which accurately describes an event handler is this:

B. Displaying a message

What is an event handler?

An event handler refers to a system that can be used to verify the input by a user. An event handler can also be used to see the browsing actions and other histories executed by a user.

Displaying a message fits in as an example of an event handler because it is through this means that one can see the input and user actions that were done some time ago. An event handler is a very vital necessity in programming activities. So, option B fits the meaning of an event handler.

Learn more about an event handler here:

https://brainly.com/question/20169706

#SPJ1

Answer:

Displaying a message

Explanation:

what are the advantages of knowing demographics over psychographics and vice versa?

Answers

It's been said that demographics help you understand who buys your product or service, while psychographics helps you understand why they buy. Another way to put it is that demographics are things that can be observed from the outside, such as age and race, while psychographics are internal attributes or attitudes.

Manipulating Images: Which aspect helps you to change the luminescence of your image?

Answers

Answer:

the aspect that help you change the luminescence of your image is iframe

1
Select the correct answer from each drop-down menu.
Correctly identify the following software design concepts.
The following are some commonly used software design concepts:
-structural partitioning
-control hierarchy
-Modularity
-Abstraction
refers to the concept that software architecture has the ability to divide into modules and that each
module can be examined independently.
-Refinement
-Modularity
-Abstraction
-Control hierarchy
is a process that elaborates on each design component until it reaches the coding details.
-Software procedure
-Structural partitioning
-Data Structure
allows designers to split a program structure horizontally and vertically.
-Software architecture
-Structural partitioning
-Modularity
-Data Structure
represents logical relationships between individual data elements.

Answers

Answer:

1. Modularity.

2. Refinement.

3. Structural partitioning.

4. Data Structure.

Explanation:

A software development life cycle (SDLC) can be defined as a strategic process or methodology that defines the key steps or stages for creating and implementing high quality software applications. There are six (6) main stages in the creation of a software and these are;

1. Planning.

2. Analysis.

3. Design.

4. Development (coding).

5. Deployment.

6. Maintenance.

One of the most important steps in the software development life cycle (SDLC) is design. It is the third step of SDLC and comes immediately after the analysis stage.

Basically, method design is the stage where the software developer describes the features, architecture and functions of the proposed solution in accordance with a standard. Some of the models or techniques used in the design of a software are;

Modularity: refers to the concept that software architecture has the ability to divide into modules and that eachmodule can be examined independently. Refinement: is a process that elaborates on each design component until it reaches the coding details.Structural partitioning: allows designers to split a program structure horizontally and vertically.Data Structure: represents logical relationships between individual data elements.

'Using more formatting options improves a document.' Do you agree with this statement? Why or why not

Answers

Answer:

Yes, I agree with the given statement: 'Using more formatting options improves a document.'

Explanation:

Formatting improves the readability of documents for end users.

Formatting features like aligning text vertically and horizontally, changing margin and line spacing change the layout of page in the document that makes a document look more presentable.

So, yes, I agree with the given statement: 'Using more formatting options improves a document.'

Page No
Date T 1 1
Ist
ament Write a program in java to find the area and
perimeter of right angled triangle by using function argument.




Answers

Answer:

ila bgfffsg hqhffa hhfw ygga gha yqvvty1uh' fttyavt h5tfauv gtta76rq

Which type of data is shown below?
apple, 0.85
banana, 0.90
peach, 1.50

multiple choice:
structured
unstructured
abstract
integer

THANK PLZ HELP

Answers

Answer:

structured

Explanation:

How would you describe
"analogous color harmony" to a six year old?

Answers

Answer:

Analogous colours are groups of three colours that are next to each other on the colour wheel, and a tertiary. ... An analogous color scheme creates a rich, monochromatic look. It is best used with either warm or cool colors, creating a look that has a certain temperature as well as proper color harmony.

Explanation:

In your own words, describe innovation.

Answers

Answer:

Something that revolutionizes a product

Explanation:

Innovation typically means completely change something that makes everyone wow. A example of this would be a car, the innovational car would have fridge in the back seat. (No current cars have this)

Hope this helps and make sure to thank me!

5. What is the significance of the EXIT DO and EXIT FOR statements?​

Answers

Answer:

Exit Do transfers control to the statement following the Loop statement. When used within nested Do...Loop statements, EXIT DO transfers control to the loop that is one nested level above the loop where it occurs.

When used within nested For loops, EXIT FOR transfers control to the loop that is one nested level above the loop where it occurs.

Explanation:

I HOPE it can help....

Which area of government regulations do the Fair Credit and Reporting Act
(FCRA) and the Gramm-Leach-Bliley Act (GLB) relate to?
A. Advertising
B. Health and safety
C. Privacy and security
D. Employment and labor

Answers

Answer:   C. Privacy and security

Explanation:  100% correct

REALLY EASY NEED HELP!! REWARD BRAINLIEST

Answers

Answer:

c

Explanation:

Answer: It is the first one

Explanation:

How do you interpret and analyze photographs? What method comes most
naturally to you when interpreting and analyzing photographic works? Identify and
discuss the methods and strategies that you use to interpret and analyze
photographs.

Answers

Answer:

You interpret and analyze photographs by observing detail.

Explanation:

What is one thing that makes a website a good website?

Answers

Make sure that your website's name and domain reflect the topic of the site. Bottom Line: Most high-traffic websites have a clear purpose and operate in a particular niche. Make sure that the purpose of your website is clear to visitors and try to stay on topic as much as possible.
Other Questions
How to fix deprecated gradle features were used in this build, making it incompatible with gradle 8.0? Discuss the position of the Anti-Federalists related to ratification of the Constitution. Use facts. A workman carries some lumber up a staircase. The workman moves 9. 6 m vertically and 22 m horizontally. If the lumber weighs 45 n, how much work was done by the workman?. Is whistleblowing the same as reporting an unauthorized disclosure?a. Classified info or controlled unclassifed info (CUI) in the public domain.b. Improper Safeguardingc. Prepublication Reviewd. No, they use different reporing procedures. Which of the following best describes smaller DNA fragments that undergo DNA electrophoresis?They travel faster towards the negative end of the gel.They travel faster and further than larger fragments.They travel slower than larger fragments.They travel slower towards the positive end of the gel. What is the value of x? round to the nearest tenth, if necessary. responses x = 4 x, = 4 x = 5 x, = 5 x = 6.2 x, = 6.2 x = 9.4 Why should filibuster be abolished The table represents a proportional relationship. Write an equation to represent the relationship.The table has two rows and three columns. The first row is cups of flour, x. The second row is loaves of bread, y. Six cups of flour, two loaves of bread. Nine cups of flour, three loaves of bread. Fifteen cups of flour, five loaves of bread.Enter the correct equation in the box. In a business-to-business transaction, the seller offers the buyer a 2 percent discount for paying a bill early. If the buyer takes advantage of this offer, how much would be discounted on a $12,000 invoice? help asap What are the tools the students use in order to collaborate? A peanut burned in a calorimeter transfers 18,200 joules to 100.0 g of water. What is the rise in the water's temperature Part a Find the magnitude of the net force required to stop a car with a mass of 1050 kg, initial speed is 40.0 km/h, and stopping distance 25.0 m. In the section With a Little Help from My Friends, why does the author use the phrase "misery may love company"? A. to convince people that pets are better company than a loving partner B. to encourage people to find mates for their friends who are unhappy C. to point out that people will be happier with positive relationships D. to recommend that people try to influence negative people in a positive way Differentiate foreign investment from the types of aid provided by the UNDP and world bank, citing specific examples of aid from both. g-h + 8, when g = 3, h = 5 Depending on environmental conditions, specific genes can be either a. active or inactive b. identical or fraternal c. structured or unstructured d. monozygotic or dizygotic what is a cummon noun the toll on a highway us based on the miles driven. If the toll in a 15-mile stretch on a highway is $0.60. find the cost to drive a 80-mile stretch Calculate the backwash velocity necessary to expand a sand filter with an effective size of 0.6 mm and a uniformity coefficient of 1.3. This medium (or any other, for that matter) can be cleaned at a backwash velocity of 0.3 m/min if the fluidization is provided by air scour. Calculate the volume of water saved during a 10 min backwash of a 2 by 4 m filter if air scours is used. If the cost of water production is 25 BDT/m3, how much money would be saved per year by air fluidization if the filter runs on average 2 days in length? A graph titled Position versus Time shows time in seconds on the x axis, numbered 0 to 5, and position in meters on the y axis, numbered 0 to 15. The graph is a straight line from the (0, 3) to (4, 15).Based on the information presented in the graph, what is the velocity of the object? m/s