By using the accuracy as a metric, a baseline score of 99% needs to be set for a baseline accuracy score that the new model would want to outperform.
What will be the good choice for a baseline accuracy?A good choice for a baseline accuracy score would be 70%. This is because the baseline accuracy score needs to be high enough to help differentiate between infected and uninfected individuals.
If the score was too low, then the model would not be able to accurately predict whether someone is infected with a new strain of the virus. Since this represents an example of a classification problem. The ideal score to achieve in such a case is 100%. Hence, a baseline score of 99% should be set in order to get to 100% by outperforming it.
Therefore, By using the accuracy as a metric, a baseline score of 99% needs to be set for a baseline accuracy score that the new model would want to outperform.
Learn more about baseline accuracy on:
https://brainly.com/question/30193816
#SPJ2
22-If elevation effects are neglected, the stagnation pressure is..
1- The largest pressure obtainable along a given streamline
2- Always equal to atmospheric pressure
3- Always equal to zero
4- The smallest pressure obtainable along a given streamline
Which is correct?
If elevation effects are neglected, the stagnation pressure is the largest pressure obtainable along a given streamline. The correct option is 1.
What is stagnation pressure?The pressure at the point along a streamline when the fluid stops moving is known as stagnation pressure. Therefore, the full amount of kinetic energy is transformed to pressure rise if the elevation effects are disregarded.
Therefore, the stagnation pressure is the highest pressure that may be applied along a given streamline if the elevation effects are ignored.
Therefore, the correct option is 1- The largest pressure obtainable along a given streamline.
To learn more about stagnation pressure, refer to the link:
https://brainly.com/question/19866217
#SPJ9
The overhung diving board of problem 3-10 is shown in figure P4-4a. Assume cross-section dimensions of 305 mm*32 mm. The material has E = 10.3 GPa. Find the largest principal stress at any location in the board when a 100 - kg person is standing in the center of the width of the board at the free end. What is the maximum deflection?
We can use the bending formula to determine the maximum deflection: = (5)
What does engineering deflection mean?Deflection in structural engineering refers to the amount that a structural element is shifted under a load (because it deforms). It might be referring to a distance or an angle.
The maximum normal stress theory can be used to determine the major stress that is the biggest.
The following formula can be used to determine the bending stress:
σ_b = (M y) / I
The shear stress can be calculated using the following formula:
τ = VQ / It
where τ is the shear stress, V is the shear force, Q is the first moment of area, I is the area moment of inertia, and t is the thickness of the board.
M = (1/4) (100 kg) (9.81 m/s^2) (1.5 m)
M = 368.4 Nm
The area moment of inertia for a rectangle about its neutral axis is:
I = (1/12) b h^3
where b is the width of the rectangle and h is the height or thickness. Substituting the given dimensions, we get:
I = (1/12) (0.305 m) (0.032 m)^3
I = 1.034 x 10^-7 m^4
The distance from the neutral axis to the top surface of the board is half of the thickness:
y = (1/2) (0.032 m)
y = 0.016 m
Substituting these values, we get:
σ_b = (M y) / I
σ_b = (368.4 Nm) (0.016 m) / 1.034 x 10^-7 m^4
σ_b = 5.71 x 10^7 Pa
The shear force at any point along the board is:
V = (100 kg) (9.81 m/s^2)
V = 981 N
The first moment of area for a rectangle about its neutral axis is:
Q = (1/6) b h^3
Substituting the given dimensions, we get:
Q = (1/6) (0.305 m) (0.032 m)^3
Q = 3.45 x 10^-8 m^3
Substituting all the values, we get:
τ = VQ / It
τ = (981 N) (3.45 x 10^-8 m^3) / (1.034 x 10^-7 m^4)(0.032 m)
τ = 1.03 x 10^7 Pa
σ_max = (σ_b / 2) + √[(σ_b / 2)^2 + τ^2]
σ_max = (5.71 x 10^7 Pa / 2) + √[((5.71 x 10^7 Pa / 2)^2) + (1.03 x 10^7 Pa)^2]
σ_ma = 6.77 x 10^7 Pa
To know more about bending formula visit:-
https://brainly.com/question/30136969
#SPJ4
Which of the following is NOT an example of a common challenge of the Six Sigma Methodology within an organization?Select one:a.) lack of supportb.) poor project executionc.) excess resourcesd.) lack of access to data
Excess resources is not a common challenge of the Six Sigma Methodology within an organization. The common challenges are lack of support, poor project execution, and lack of access to data.
The Six Sigma Methodology is a process improvement methodology focused on reducing defects and increasing customer satisfaction. Common challenges of this methodology within an organization include lack of support, poor project execution, and lack of access to data. Excess resources, however, is not a common challenge as this would not directly impact the success of the methodology. Lack of support is often seen when senior management doesn’t understand the value of the methodology and fails to provide resources or support for its implementation. Poor project execution is common when the methodology isn’t applied correctly or if the organization lacks the necessary training or skills to complete the project successfully. Finally, lack of access to data is a common challenge when the organization does not have adequate data to identify problems and create solutions. Therefore, excess resources is not a common challenge of the Six Sigma Methodology within an organization.
Learn more about methodology here:
https://brainly.com/question/29220500
#SPJ4
The question is in the pic, pls help
Explanation:
hji ok I will be able to attend the class tomorrow morning and will be able to attend the class tomorrow
The elliptical machine was introduced into the fitness world in 1995. it is a stationary machine that is used in health clubs. what is the main goal for using the elliptical machine?
Elliptical machines are intended for aerobic or cardiovascular exercises.
What is an elliptical machine?A stationary exercise equipment known as an elliptical trainer or cross-trainer is used to climb stairs, walk, or run without putting undue strain on the joints, hence lowering the risk of impact injuries.
Because of this, people with certain injuries can use an elliptical to maintain their fitness because the low impact has little effect on them.
For people who want to permanently lose belly fat, the elliptical is ideal. You're much less likely to suffer an injury compared to other cardio options, and the numerous incline and resistance settings can keep things interesting for years to come.
Learn more about b machine here:
https://brainly.com/question/21684758
#SPJ1
Machine movement can be divided into what two main categories? Motions Power Type Actions
Machine movement can be divided into two main categories: Motions and Actions. The correct options are A and D.
What are categories of Machine movement?There are two basic categories of machine motion: linear motion and rotational motion.
Movement along a straight line is referred to as linear motion, whereas movement around an axis or a central point is referred to as rotational motion.
Combining these two motion patterns can result in intricate movements that let machines carry out a variety of activities.
The source of power utilized to drive the machine, such as electric, hydraulic, or pneumatic power, is referred to as the power type.
The design of machines and how various types of motion and power are combined determine the actions that they carry out.
Thus, the correct options are A and D.
For more details regarding machine movement, visit:
https://brainly.com/question/14276786
#SPJ9
Your question seems incomplete, the probable complete question is:
Machine movement can be divided into what two main categories?
MotionsPowerTypeActionsMatching-Opponent is a simple two-player game where players simultaneously submit a number. In each round, players simultaneously submit either the number 0 or the number 1. Each player has a different objective to be declared winner. Player A's goal is to match the input of Player B two times in a row and then to not match for one turn. (MATCH -> MATCH -> NO MATCH) Player B's has a similar but different set of goals. In order to win, player 2 must not match player 1's input for one turn and then match the input of player 1 for two turns in a row. (NO MATCH - > MATCH-> MATCH) Your job is to build a FSM to track the state of the game. Your finite state machine should take two 1-bit data inputs ('a' and 'b') which correspond to the numbers submitted by each player. When either of the players wins, your FSM should output a 1 on the winner's output signal (i.e, A-1 if player A wins, B-1 if player B wins) and remain in that win state for the rest of time
Here's a FSM for Matching-Opponent game:
State 1: Start -> State 2 on (a or b = 0)
State 2: A-1 -> State 3 on (a = b) or back to State 1 on (a or b = 0)
State 3: A-2 -> State 4 on (a or b = 0) or back to State 1 on (a != b)
State 4: A-3 -> A-Win and stay, or back to State 1 on (a or b = 0)
State 1: Start -> State 5 on (a or b = 1)
State 5: B-1 -> State 6 on (a != b) or back to State 1 on (a or b = 1)
State 6: B-2 -> B-Win and stay, or back to State 1 on (a != b) or to State 5 on (a = b)
What are the two players' objectives in the Matching-Opponent game?Player A's objective in the Matching-Opponent game is to match the input of Player B two times in a row and then not match for one turn. Player B's objective is to not match Player A's input for one turn and then match Player A's input for two turns in a row. The first player to achieve their objective is declared the winner of the game.
To know more about Opponent visit:
https://brainly.com/question/1550286
#SPJ4
identify a true statement about the procedure when a claim filed in court that is covered by the mandatory arbitration law is placed in the arbitration track at time of filing
The court will refer the case to an arbitration service provider to be administered in accordance with the arbitration law.
When a claim is filed in court and covered by the mandatory arbitration law, the court will refer the case to an arbitration service provider to be administered in accordance with the arbitration law. This means that instead of the case being heard in court, it will be heard by an arbitrator. The arbitration process will typically involve both sides presenting their case and the arbitrator will make a binding decision. The court will not be involved in the decision making process and the decision of the arbitrator is final and cannot be appealed. This procedure helps to speed up the dispute resolution process, as well as reduce costs associated with court proceedings.
Learn more about service provider here:
https://brainly.com/question/29992394
#SPJ4
The complete question is
identify a true statement about the procedure when a claim filed in court that is covered by the mandatory arbitration law is placed in the arbitration track at time of filing in court
using the datapath we built during class, remember the boolean expressions for the flags. use them to solve this problem.negative
Boolean variables are commonly referred to as "boolean flags" since they are frequently used to switch on and off certain behaviours that can be helpful.
In computer science, a Boolean value encoded as one or more bits known as a Boolean flag, truth bit, or truth flag designates a state variable having two potential values. A Flag is a boolean variable that alerts programmers when a certain circumstance occurs. When a flag is set to true, it denotes that a condition is true; when it is set to false, it denotes that the condition is untrue. Highscore is a flag in this case that indicates the score is more than 95 if(score > 95) highscore = true; An expression that may only be evaluated as true or false is called a boolean expression (after mathematician George Boole).
To learn more about Boolean click on the link below:
brainly.com/question/29846003
#SPJ4
These apartments can be described as small, cramped, dirty, overcrowding often without electricity.A.) LoftsB.) ShantiesC.) TramsD.) Tenements
The apartments probably described in the question can be termed as "Tenements" and families living there have relatively poor life standard .
What are Tenements?
Tenements are a type of low-cost, overcrowded housing that was common in many urban areas in the late 19th and early 20th centuries.
They were often small, cramped, and in poor condition, with limited access to light, air, and basic amenities such as electricity.
Tenements were frequently overcrowded, with many families living in a single apartment, and they often lacked proper sanitation facilities.
This type of housing was most commonly associated with poverty and squalor, and it was a major factor in the growth of slums in many cities.
To know more about housing and Apartments, visit: https://brainly.com/question/23745145
#SPJ4
Positive engagement or movable pole shoe type starters are normally found on older vehicles built by _____. A)GM B)Ford C)Chrysler D)Toyota.
Ford requested inclusion so that the firm wouldn't suffer, but the Treasury Department lent money and purchased GM and Chrysler stock instead.
Companies that relied on credit suffered greatly during the 2008 financial crisis, commonly known as the "credit crisis," and as a result, the automotive industry experienced a crisis from 2008 to 2010. Prior to the crisis, the automotive industry had been suffering from the rise in car fuel prices and the energy crisis, which had deterred consumers from purchasing fuel-hungry vehicles. Although the 2008 financial crisis had an impact on the European and Asian automobile industries, it had the greatest impact on the American industry because it was the source of the financial catastrophe. Therefore, the "Big Three" automakers—GM, Chrysler, and Ford—asked Congress for a financial bailout and issued a bankruptcy warning for GM and Chrysler.
Learn more about Credit crisis here:
https://brainly.com/question/2227087
#SPJ4
the velocity fielf of a flow is given by where vo is a constnat. where in the flow field is the speed equal to vo
A flow's velocity field can be calculated using the formulas u = -Voy/(x2 + y22)/2 and v = Vox/(x2 + y2)/2, where V is a constant.
How can a velocity field's flow be determined?In order to determine the flow of a velocity field, one must take the line integral of the function over the curve denoted by the formula Fdr F d r, which will be evaluated with the use of derivatives.
What exactly is a velocity field's streamline?Streamlines are a kind of curves whose tangent vectors make up the flow's velocity vector field. These display the direction that a massless fluid element will move at all times.
To know more about velocity visit:-
https://brainly.com/question/13091231
#SPJ4
An attacker gains unauthorized access to a virtual server in a public cloud. Which of the following statements about the attack can be true?The attacker is an anonymous, non-trusted cloud service consumer.The attacker is a cloud service consumer that resides outside of the cloud, in an on-premise environment.The attacker is a cloud service consumer that resides in a different cloud.All of the above.
All of the above statements are true; an attacker can be an anonymous, non-trusted cloud service consumer, a cloud service consumer that resides outside of the cloud, or a cloud service consumer that resides in a different cloud.
All of the above statements are true. An attacker can gain unauthorized access to a public cloud virtual server by being an anonymous, non-trusted cloud service consumer. This means the attacker does not have any authenticated credentials or trust relationship with the cloud provider. The attacker could also be a cloud service consumer that resides outside of the cloud, in an on-premise environment. This means the attacker is accessing the public cloud from outside of the cloud, not from within the cloud. Lastly, the attacker could be a cloud service consumer that resides in a different cloud. This means the attacker is accessing the public cloud from a different cloud service provider, not from the cloud that is being attacked. In all of these cases, the attacker has gained unauthorized access to the public cloud virtual server.
Learn more about cloud service here:
https://brainly.com/question/29531817
#SPJ4
1. Illustrate the following parts of a hatchback car body i. Rear wing ii. BC-post iii. Bonnet iv. D-post Bonnet V. 10m
Some of the Illustration of the parts of a hatchback car body is given in the image attached.
What is the car body about?Rear wing: The rear wing is an aerodynamic device typically located on the rear deck of a car, near the back of the roof. It helps to reduce drag and improve stability and handling by providing downforce at high speeds.
ii. B-post: The B-post is the structural member located between the front and rear doors of a car body. It provides support and strength to the car body and is usually part of the side structure of the vehicle.
iii. Bonnet: The bonnet, also known as the hood, is the part of a car body that covers the engine and other mechanical components. It is typically hanged at the front of the car and can be lifted to provide access to the engine.
iv. D-post: The D-post is the vertical structural member that runs between the roof and floor of a car body. It provides support and strength to the car body, particularly in the event of a rollover.
Learn more about car body from
https://brainly.com/question/29706014
#SPJ1
TRUE/FALSE. the recrystallization temperature is the temperature at which a metal recrystallizes, forming new grains instead of strain hardening.
The correct answer is FALSE.the recrystallization temperature is the temperature at which a metal recrystallizes, forming new grains instead of strain hardening.
Steels commonly recrystallize at temperatures between 400 and 700 °C. The degree of cold work and the composition of the steel determine the recrystallization conditions, such as heating rate and soaking duration. As the annealing temperature approaches the A1 point, the rate of softening rises quickly. The recrystallization effect is generally at its best when the annealing temperature is between 420 and 430 °C in the range of 350 °C to 450 °C, according to the annealing pre-experiment. The temperature at which 50% of recrystallization takes place in an hour is known as the recrystallization temperature. The melting point and the amount of impurities in the metals are the main determining factors.
To learn more about recrystallization click on the link below:
brainly.com/question/29215760
#SPJ4
what does rena monrovia use when you transport something by car ?
The Rena is the largest ship ever lost in New Zealand waters. Built in 1990 as the Zim America, it was 37,209 tons gross registered tonnage and 47,000 tonnes deadweight (i.e., what it can carry).
Who is Rena monvoria?The largest vessel lost here previously was the Soviet cruise ship Mikhail Lermontov, which sank in Port Gore in the Marlborough Sounds on 16 February 1986 after striking rocks while leaving Queen Charlotte Sound.
The Mikhail Lermontov, built in 1972, was 22,352 tons gross and 155 m long. One crewman died, and several recreational divers have died since then while exploring the wreck.
Before that, the largest ship lost in local waters was the Canadian Australasian Line -passenger liner Niagara, sunk off the Mokohinau Islands by a German-laid mine on 19 June 1940.
Therefore, The Rena is the largest ship ever lost in New Zealand waters. Built in 1990 as the Zim America, it was 37,209 tons gross registered tonnage and 47,000 tonnes deadweight (i.e., what it can carry).
To learn more about Rena, refer to the link:
https://brainly.com/question/26748620
#SPJ1
consider a module that takes 4-bit input x, and outputs a 4-bit value y that is equal to the input with its bit reversed. for example, if x is 1101 then y is 1011. a. write a verilog description of the module using a case statement. (20 points) b. write a verilog description of the module using a single assign statement. (20 points)
According to the statement, about the 4-bit input module, we answer the questions:
a. Here's a Verilog description of the module using a case statement:
module bit _reverse (
input [3 : 0] x,
output [3 : 0] y
) ;
case (x)
4'b0000 : y = 4'b0000 ;
4'b0001 : y = 4'b1000 ;
4'b0010 : y = 4'b0100 ;
4'b0011 : y = 4'b1100 ;
4'b0100 : y = 4'b0010 ;
4'b0101 : y = 4'b1010 ;
4'b0110 : y = 4'b0110;
4'b0111 : y = 4'b1110 ;
4'b1000 : y = 4'b0001 ;
4'b1001 : y = 4'b1001 ;
4'b1010 : y = 4'b0101 ;
4'b1011 : y = 4'b1101 ;
4'b1100 : y = 4'b0011 ;
4'b1101 : y = 4'b1011 ;
4'b1110 : y = 4'b0111 ;
4'b1111 : y = 4'b1111 ;
endcase
end
endmodule
b. Here's a Verilog description of the module using a single assign statement:
module bit _ reverse (
input [ 3 : 0] x,
output [ 3 : 0] y
) ;
assign y = {x [3], x [2], x [1], x[0] } ;
endmodule
Both descriptions implement the same function of reversing the bits of the input. The first uses a case statement to explicitly assign output values to each input value, while the second uses a concatenation to simply reverse the order of the bits.
Learn more about verilog:
https://brainly.com/question/29417142
#SPJ4
In analyzing failures due to insufficient lubrication, the technician will have to be concerned about which two things failing?
A. air cleaners and air filtration systems
B. carburetors and fuel supply
C. mechanical parts and lubricant
D. none of the above
3. to be eligible to work with the swim team, an employee must have at least two years of experience or have completed cpr training. in cell k3 enter a formula using the if and or functions and structured references as follows to determine if tiffany adams can work with the swim team:
Tiffany adams can work with the swim team:IF(OR(K2>=2,K4="Yes"),"Yes","No") .
What is the swim ?Swimming is an activity enjoyed by people of all ages and abilities. It is a great form of exercise that provides a low-impact, full-body workout. It can help improve cardiovascular health, as well as build strength and endurance. Plus, it can be a great way to have fun and relax. Swimming is a lifetime sport that can be enjoyed by people of all ages, from infants to seniors. It is a great way to stay fit and healthy, while also providing a fun, social activity. Swimming can be done in a variety of forms, such as freestyle, breaststroke, butterfly, and backstroke.
To learn more about swim
https://brainly.com/question/15354890
#SPJ1
determine the maximum constant speed at which the pilot can travel around the vertical curve having a radius of curvature r
The best choice is C) Because speed is constant, the maximum constant speed at which the pilot can travel around the vertical curve having a radius of curvature r.
F 1 = 0 = F mgsin
⇒F=mgsinθ
⇒F cs² = \sR smv s²
mgcos = N
"N=mgcos" R mv²
The formula is: =mgcos R o (2+cos) mv².
=600cos 45 1250 (cos+2)
60 375 375 = 600 cos (2 + cos).
337.5
N=0 for human weightlessness
cos(2 + cos) = r o g v²
"2cos" + "cos 2" = (375/2 5 ) 2 )/125*10²
⇒θ=cos s⁻¹ (after solving quadratic equation) (after solving quadratic equation)
When the plane is at its lowest point and 180°, the magnitude of the normal is equal to 600cos 180° plus 2+cos180°.
337.5 s²
=937.5N
Learn more about speed here-
https://brainly.com/question/9505366
#SPJ4
Given sphere-radius and pi, compute the volume of a sphere and assign to sphere-volume. Volume of sphere-(4,0 / 3,0) π r sample output for the given program is: 4.18878666667 1 pi = 3.14159 2 sphere-radius = 1.0 3 sphere volume 0.0 4 5 "'Your solution goes here''
6 sphere_volume CC4.0/3.0)3.14159)*1**3) 7 print sphere_volume)
python code :
pi = 3.14159
sphere_radius = 1.0
sphere_volume = (4.0/3.0) * pi * (sphere_radius**3)
print(sphere_volume)
Output: 4.18878666667
What is the variable name used to store the sphere radius in the given program?The variable name used to store the sphere radius in the given program is 'sphere-radius'. It is assigned a value of 1.0, indicating that the radius of the sphere is 1 unit. This value is used in the calculation of the sphere volume, which is assigned to the variable 'sphere_volume'. The 'sphere_volume' variable is then printed as output, giving the volume of the sphere with the given radius and the value of pi provided in the program.
To know more about Radius visit:
brainly.com/question/22269716
#SPJ4
An engine starting system must crank or spin the engine until fuel _______ forces the pistons down and the engine begins to operate on its own power.
An engine starting system must crank or spin the engine until fuel ignites forces the pistons down and the engine begins to operate on its own power.
What is Engine?Engine is a machine that converts energy into mechanical work. It is a device that takes an energy source, such as electricity, fuel, or solar power, and converts it into a form of energy that can be used to drive a machine, such as a car, truck, boat, or generator. Engines are used in almost all forms of transportation, from cars and trucks to boats and planes. They are also used in many industrial and commercial applications, such as manufacturing, power generation, and construction. Engines are composed of a number of components, including cylinders, pistons, valves, and a crankshaft. The pistons in the cylinders move up and down, creating energy that is then converted into movement that drives the crankshaft and ultimately powers the machine. Engines are usually powered by gasoline, diesel, or other fuels, although some can use electricity or solar power. They come in many different sizes and configurations, and are found in a variety of vehicles, from cars and motorcycles to boats and plane.
To learn more about Engine
https://brainly.com/question/13146091
#SPJ1
An engine starting system must crank or spin the engine until fuel Combustion forces the pistons down and the engine begins to operate on its own power.
What is Combustion?Combustion is a chemical reaction in which a substance reacts quickly with oxygen and produces heat. The original substance is referred to as the fuel, and the source of oxygen is referred to as the oxidizer. The fuel can be solid, liquid, or gas, but it is usually a liquid for aeroplane propulsion. Similarly, the oxidizer could be a solid, liquid, or gas, but for aeroplanes, it is usually a gas (air). A solid fuel and oxidizer are used in model rockets.
New chemical substances are formed during combustion from the fuel and the oxidizer. These substances are referred to as exhaust. The majority of the exhaust is caused by chemical reactions between the fuel and oxygen.
Learn more about Combustion
https://brainly.com/question/15117038
#SPJ1
an oscilloscope is used to measure what type of signal?
An oscilloscope is a measuring instrument used to visualize and analyze electronic signals. It can be used to measure various types of signals, including both analog and digital signals.
Common applications of an oscilloscope include measuring and analyzing waveforms such as sine waves, square waves, sawtooth waves, and other periodic signals. It can also be used to measure the timing, frequency, and amplitude of signals, and to observe signal characteristics such as noise, distortion, and transients.
Overall, an oscilloscope is a versatile tool that is widely used in fields such as electronics, telecommunications, engineering, and physics to measure and analyze a wide range of electronic signals.
Learn more about oscilloscope:
https://brainly.com/question/29354071
#SPJ4
true/false. a general guideline for performance of hard drives suggests that when the amount of data stored on a particular hard drive averages 95% of available capacity for a prolonged period, you should consider an upgrade for the drive.
The statement is false. While it is generally a good practice to maintain a certain amount of free space on a hard drive to optimize its performance.
While it is generally a good practice to maintain a certain amount of free space on a hard drive to optimize its performance, there is no hard and fast rule that states a specific percentage of used space that should trigger a need for an upgrade. The recommended percentage of free space varies depending on the type of hard drive, its capacity, and the intended usage. However, as a general guideline, it is recommended to keep at least 10-20% of the hard drive space free to ensure optimal performance. Filling a hard drive to near capacity for a prolonged period may result in decreased performance, increased risk of data loss or corruption, and can even cause hardware failures.
Learn more about hard drive :
https://brainly.com/question/10677358
#SPJ4
what transport protocol/ports do dns and dhcp use?
DNS is the one that basically uses both UDP and TCP transport protocols.
What is DNS?DNS primarily uses port 53 for User Datagram Protocol (UDP) transport, while it can alternatively use Transmission Control Protocol (TCP) on the same port.
Both the UDP and TCP transport protocols are used by DNS. Normal DNS requests are made by default using UDP on port 53, while zone transfer requests, which replicate DNS records between DNS servers, are made using TCP.
On the other hand, UDP is the transport protocol used by DHCP. DHCP server messages are sent via port 67, and DHCP client messages are sent over port 68.
Thus, these are the protocol that DNS and DHCP use.
For more details regarding DNS, visit:
https://brainly.com/question/30408285
#SPJ1
a student counted 92, 90, 92, 91, 93, and 91 paces in six trials of walking along a course of 211- ft known length on level ground. then 85, 86, 86, and 84 paces were counted in walking four repetitions of an unknown distance ab .
In order to find the length of the unknown distance AB, we need to first find the average number of paces per foot in the six trials of the known distance.
We can do this by dividing the total number of paces by the known length:
92 + 90 + 92 + 91 + 93 + 91 = 549 paces549 paces / 211 ft = 2.6 paces per footNext, we can find the average number of paces in the four trials of the unknown distance:
85 + 86 + 86 + 84 = 341 paces341 paces / 4 trials = 85.25 paces per trialNow, we can use the average number of paces per foot to find the length of the unknown distance:
85.25 paces / 2.6 paces per foot = 32.79 ftTherefore, the length of the unknown distance AB is approximately 32.79 ft.
Learn more about distance: https://brainly.com/question/28551043
#SPJ11
a road able to support heavy loads. it was made out of crushed, packed stones/gravel and clay is called?
John McAdam of Scotland created the macadam pavement type in the 18th century. The cross section of McAdam's road was made out of a compacted subgrade of crushed granite or greenstone intended to hold the weight.
"A mixture of substances with gravel, crushed rock, or the like, used for paving" is how asphalt is defined. To add to the background, John Loudon McAdam, the man credited with "inventing" the modern pavement surface, is where the name macadam comes from. "A combination of ingredients with gravel, crushed rock, or the like, used for paving" is how asphalt is defined. To add to the background, John Loudon McAdam, the man credited with "inventing" the modern pavement surface, is where the name macadam comes from. topped by a covering of light stone to absorb wear and tear and shed water into the drainage ditches.
To learn more about McAdam click on the link below:
brainly.com/question/1369106
#SPJ4
Determine the moment about point A of each of the three forces acting on the beam. (Figure 1) Consider the counterclockwise direction to be positive moment.
Express your answers using three significant figures separated by commas.
The counterclockwise direction to be positive moment are 1.400 N-m, 0 N-m, -2.600 N-m.
What is the counterclockwise ?Counterclockwise refers to a direction which is the opposite of clockwise. It involves rotating or moving in a circular pattern in the opposite direction of the hands on a clock. Counterclockwise motion is often used in games, exercise, and physical activities such as spinning. It is also used to describe the movement of objects in the environment such as the rotation of the Earth, the Earth's orbit around the sun, the spin of a tornado, and the rotation of the Moon around the Earth. Counterclockwise motion is also used when describing directions on a map or in a compass. In some countries, such as the United Kingdom, counterclockwise is referred to as “anticlockwise”.
To learn more about counterclockwise
https://brainly.com/question/26097503
#SPJ1
given a planar wall with length l and thermal conductivity k, write the generalized heat equation in differential form, and simplify it for the following assumptions:
Stable Heat Transfer in Plane Walls T = T2 - T1 represents the temperature differential along the wall. we can usually write thermal conductivity K = (QL)/(AΔT)
In terms of thermal conductivity, what is the K formula?In Joules/second or Watts, Q is the rate of heat transport through the medium. The distance (L) separating the two isothermal planes. The square meter measurement for the surface area is A. The Kelvin scale measures temperature differences as T.
Why Does Fourier's Law Exist?The area at right angles to the gradient through which heat flows is proportional to the negative gradient of temperature and the time rate of heat transfer, according to Fourier's law. Law of heat conduction is also referred to as Fourier's law.
To know more about thermal conductivity visit:-
https://brainly.com/question/7643131
#SPJ4
_____ operators compare the relationship between two values or arguments. (a) Comparison.
(b) Relational.
(c) Logical.
(d) Evaluation.
Answer:
Relational
Explanation: