Answer:
reviewing the different answers, the correct one is d
Explanation:
In the experiment to determine the resistivity of the wires, the student should use the relationship
R = ρ L / A
ρ = R A/L
in the statement they indicate that the difference that potential and current are measured, calculating the resistances from Ohm's law
V = i R
R = V / i
As resistivity is a property of the material that depends on the temperature, great care must be taken that the resistors do not change the temperature during the experiment, as this alters the resistivity value.
When reviewing the different answers, the correct one is d
What us a magnetic domain?
magnetic domain is a region within a magnetic material in which the magnetization is in a uniform direction. This means that the individual magnetic moments of the atoms are aligned with one another and they point in the same direction.
I'm asking for a quick favor. I'm trying to understand an equation that has to do with Projectile motion, Bernoulli's principle, and Magnus Effect. Basically focused on understanding air resistance on a projectile. I would like to discuss this privately rather than have it on this public forum. I'll give you 100 of my points if you help.
Explanation:
Projectile motion, Bernoulli's principle, and Magnus Effect.
Sure I would be happy to discuss projectile motion!
I'll do it if you mark brainliest :) I need the points thanks
As dancers twirl faster and faster around their partners, they are demonstrating what type of energy?
A. Binding energy,
B. Nuclear energy,
C. Kinetic energy,
How is it difficult to perform electrostatic experiments on humid days
Answer:
that should be the right answer
What happens when a moving object experiences no net force?
Answer:
An object with no net forces acting on it which is initially at rest will remain at rest. If it is moving, it will continue to move in a straight line with constant velocity. Forces are "pushes" or "pulls" on the object, and forces, like velocity and acceleration are vector quantities.
A scientist plans to release a weather balloon from ground level, to be used for high-altitude atmospheric measurements. The balloon is spherical, with a radius of 2.10 m, and filled with hydrogen. The total mass of the balloon (including the hydrogen within it) and the instruments it carries is 24.0 kg. The density of air at ground level is 1.29 kg/m3. (a) What is the magnitude of the buoyant force (in N) acting on the balloon, just after it is released from ground level
Answer:
Fb = 490.4 N
Explanation:
According to Archimedes' principle, any object submerged in a fluid, receives a push upward (which we call buoyant force) equal to the weight of the volume of the fluid removed by the object.We can express this force (Fb), in terms of the density and the volume of the fluid, as follows:[tex]F_{b} = \rho * V * g (1)[/tex]
The volume removed from the fluid by the balloon is just the volume of the balloon, assuming that it is a perfect sphere, as follows:[tex]V = \frac{4}{3}*\pi * R^{3} = \frac{4}{3} *\pi *(2.1m)^{3} = 38.8 m3 (2)[/tex]
Replacing by the givens and (2) in (1), we get:[tex]F_{b} = \rho * V * g = 1.29 kg/m3* 38.8m3*9.8m/s2 = 490.4 N (3)[/tex]
Object A is moving due east, while object B is moving due north. They collide and stick together in a completely inelastic collision. Momentum is conserved. Object A has a mass of m A = 17.0 kg and an initial velocity of v 0A = 8.00 m/s, due east. Object B, however has a mass of m B = 29.0 kg and an initial velocity of v 0B = 5.00 m/s, due north. Find the magnitude and direction of the total momentum of the two-object system after the collision.
Answer:
pf = 198.8 kg*m/s
θ = 46.8º N of E.
Explanation:
Since total momentum is conserved, and momentum is a vector, the components of the momentum along two axes perpendicular each other must be conserved too.If we call the positive x- axis to the W-E direction, and the positive y-axis to the S-N direction, we can write the following equation for the initial momentum along the x-axis:[tex]p_{ox} = p_{oAx} + p_{oBx} (1)[/tex]
We can do exactly the same for the initial momentum along the y-axis:[tex]p_{oy} = p_{oAy} + p_{oBy} (2)[/tex]
The final momentum along the x-axis, since the collision is inelastic and both objects stick together after the collision, can be written as follows:[tex]p_{fx} = (m_{A} + m_{B} ) * v_{fx} (3)[/tex]
We can repeat the process for the y-axis, as follows:[tex]p_{fy} = (m_{A} + m_{B} ) * v_{fy} (4)[/tex]
Since (1) is equal to (3), replacing for the givens, and since p₀Bₓ = 0, we can solve for vfₓ as follows:[tex]v_{fx} = \frac{p_{oAx}}{(m_{A}+ m_{B)}} = \frac{m_{A}*v_{oAx} }{(m_{A}+ m_{B)}} =\frac{17.0kg*8.00m/s}{46.0kg} = 2.96 m/s (5)[/tex]
In the same way, we can find the component of the final momentum along the y-axis, as follows:[tex]v_{fy} = \frac{p_{oBy}}{(m_{A}+ m_{B)}} = \frac{m_{B}*v_{oBy} }{(m_{A}+ m_{B)}} =\frac{29.0kg*5.00m/s}{46.0kg} = 3.15 m/s (6)[/tex]
With the values of vfx and vfy, we can find the magnitude of the final speed of the two-object system, applying the Pythagorean Theorem, as follows:[tex]v_{f} = \sqrt{v_{fx} ^{2} + v_{fy} ^{2}} = \sqrt{(2.96m/s)^{2} + (3.15m/s)^{2}} = 4.32 m/s (7)[/tex]
The magnitude of the final total momentum is just the product of the combined mass of both objects times the magnitude of the final speed:[tex]p_{f} = (m_{A} + m_{B})* v_{f} = 46 kg * 4.32 m/s = 198.8 kg*m/s (8)[/tex]
Finally, the angle that the final momentum vector makes with the positive x-axis, is the same that the final velocity vector makes with it.We can find this angle applying the definition of tangent of an angle, as follows:[tex]tg \theta = \frac{v_{fy}}{v_{fx}} = \frac{3.15 m/s}{2.96m/s} = 1.06 (9)[/tex]
⇒ θ = tg⁻¹ (1.06) = 46.8º N of E
A transverse wave is represented below. 1.5 m 0.20 m What is the approximate amplitude and wavelength of the wave? amplitude = 0.20 m, wavelength = 0.60 m B. amplitude = 0.20 m, wavelength = 0.30 m C. amplitude = 0.10 m, wavelength = 0.60 m OO amplitude = 0.10 m, wavelength = 0.30 m
Answer:
C. amplitude = 0.10 m, wavelength = 0.60 m
Explanation:
The diagram shows an oscillating progressive wave, with its amplitude and wavelength.
Amplitude of a wave is the maximum distance covered either upward or downward.
So that,
amplitude of the wave, A = [tex]\frac{0.2}{2}[/tex]
= 0.1
Amplitude of the wave = 0.1 m
Wavelength in this case is the distance from crest to crest, or trough to trough of the wave.
So that,
wavelength = [tex]\frac{1.5}{2.5}[/tex]
= 0.6
wavelength of the wave = 0.6 m
Therefore, the amplitude of the wave is 0.10 m, while the wavelength is 0.60 m.
An object is moving with constant non-zero velocity. Which of thw following statements about it must be true
Answer:
The net force on the object is zero.
Explanation:
An object is moving with constant non-zero velocity. If velocity is constant, it means that the change in velocity is equal to 0. As a result, acceleration of the object is equal to 0. Net force is the product of mass and acceleration. Hence, the correct option is (d) "The net force on the object is zero".
While sitting in a boat, a fisherman observes that 2 complete waves pass by his position every 4 seconds. What is the period of these waves?A)2s B)8s C) 0.5 s D) 4s
Answer:
2
Explanation:
Because 2 waves 4 secs means 1 in 2s
The period of these waves is 2s. and The right option is A)2s.
The period of a wave is the time taken by a wave to complete one cycle.
The formula of period from the question is given below.
⇒ Formula:
T = t/2.................... Equation 1⇒ Where:
T = Period of the wavet = time taken for two complete oscillationFrom the question,
⇒ Given:
t = 4 seconds.⇒ Substitute these value above into equation 1
T = 4/2T = 2 seconds.Hence, The period of these waves is 2s.
The right option is A)2s
Learn more about period here: https://brainly.com/question/22059232
Due to historical difficulty in delivering supplies by plane, one of your colleagues has suggested you develop a catapult for slinging supplies to affected areas, similar to the electromagnetic lift catapults used to launch planes from aircraft carriers. This catapult is located at a fixed point 400 meters away and 50 meters below the target site. The catapult is capable of launching the payload at 67 meters per second and an initial launch angle of 50 degrees. Using your knowledge of kinematics equations, determine whether this would be sufficient to deliver the payload to the drop site.
Answer:
Please see below as the answer is self-explanatory.
Explanation:
We can take the initial velocity vector, which magnitude is a given (67 m/s) and project it along two directions perpendicular each other, which we choose horizontal (coincident with x-axis, positive to the right), and vertical (coincident with y-axis, positive upward).Both movements are independent each other, due to they are perpendicular.In the horizontal direction, assuming no other forces acting, once launched, the supply must keep the speed constant.Applying the definition of cosine of an angle, we can find the horizontal component of the initial velocity vector, as follows:[tex]v_{avgx} = v_{o}*cos 50 = 67 m/s * cos 50 = 43.1 m/s (1)[/tex]
Applying the definition of average velocity, since we know the horizontal distance to the target, we can find the time needed to travel this distance, as follows:[tex]t = \frac{\Delta x}{v_{avgx} } = \frac{400m}{43.1m/s} = 9.3 s (2)[/tex]
In the vertical direction, once launched, the only influence on the supply is due to gravity, that accelerates it with a downward acceleration that we call g, which magnitude is 9.8 m/s2.Since g is constant (close to the Earth's surface), we can use the following kinematic equation in order to find the vertical displacement at the same time t that we found above, as follows:[tex]\Delta y = v_{oy} * t - \frac{1}{2} *g*t^{2} (3)[/tex]
In this case, v₀y, is just the vertical component of the initial velocity, that we can find applying the definition of the sine of an angle, as follows:[tex]v_{oy} = v_{o}*sin 50 = 67 m/s * sin 50 = 51.3 m/s (4)[/tex]
Replacing in (3) the values of t, g, and v₀y, we can find the vertical displacement at the time t, as follows:[tex]\Delta y = (53.1m/s * 9.3s) - \frac{1}{2} *9.8m/s2*(9.3s)^{2} = 53.5 m (5)[/tex]
Since when the payload have traveled itself 400 m, it will be at a height of 53.5 m (higher than the target) we can conclude that the payload will be delivered safely to the drop site.Identify two technologies that can be used to find the locations of objects. Identify the type or types of waves each
technology uses.
I want answer plzz??
Answer:
a=0.5g ms^-2
Explanation:
Let tension be T
acceleration be a
g be gravitational acceleration 9.81ms^-2
They share same T and a
by force diagram the net force on m:
T-2.1g=2.1a
net force on M:
6.3g-T=6.3a
solve:
(T-2.1g)/(6.3g-T)=2.1a/6.3a
3T+T=12.6g
T=3.15g newton
3.15g-2.1g=2.1a
a=0.5g ms^-2
why type of volcano is built almost entirely from ejected lava fragments
Answer:
Shield volcanoes
Explanation:
If a person walks 3 m north and 5 meters east, how would you find the displacement for that person? what would the displacement be?
Answer:
AC)=(AB)2+(BC)2−−−−−−−−−−−−√=42+32−−−−−−√
⇒displacement=16+9−−−−−√=25−−√=5m
Physics gravity question, Please help
Answer: 2.7 x10^-4 N
Explanation: 6.674 ×10^-11 × 1000 x 1000 divided by 0.5 squared.
An object is spun in a circle of radius 1.5m with a frequency of 6.0Hz. what is it’s velocity ?
Answer:
56.55 m/s
Explanation:
Frequency=1/T
1/6 = 0.1666666
V=(2*pi*1.5)/0.166666
A 12.0 V storage battery is connected to three
resistors, 4.75, 14.0 and 21.0, respectively. The resistors are joined in series.
(a)Calculate the equivalent resistance.
(b)What is the current in the circuit?
Answer in units of A.
(a). The equivalent resistance of a series circuit is the SUM of the individual resistances in the circuit.
(4.75Ω + 15Ω + 21Ω ) = 39.75Ω
(b). Current = (voltage) / (resistance)
Current = (12 v) / (39.75Ω)
Current = 0.302 Amperes (rounded to the nearest MilliAmpere))
How fast is a ball going when it hits the ground after being dropped from a
height of 16 m? The acceleration of gravity is 9.8 m/s2
A. 22.5 m/s
B. 28.1 m/s
O C. 17.7 m/s
D. 19.3 m/s
Hi there!
[tex]\large\boxed{\text{C. 17.7m/s}}[/tex]
Use the following kinematic equation to solve:
vf² = vi² + 2(ad)
Since the initial velocity is 0 m/s because it started at rest, we can eliminate this part of the equation:
vf² = 2ad
Plug in the given acceleration and distance:
vf² = 2(9.8)(16)
vf ≈ 17.7. The correct answer is C.
What factors determine electric potential?
A. Mass and distance
B. Charge and density
C. Charge and distance
O D. Mass and charge
Answer: C. Charge and distance
In 1666 at the age of 23, what scientist
developed the theories of gravitation inspired
by an apple falling from a tree?
A. Galileo Galilei
B. Issac Newton
C. Albert Einstein
D. Nicolaus Copernicus
Answer:
B - Isaac NewtonExplanation:
He first thought of his system of gravitation which he hit upon by observing an apple fall from a tree,
The incident occurring in the late summer of 1666.
A flat loop of wire consisting of a single turn of cross-sectional area 8.80 cm2 is perpendicular to a magnetic field that increases uniformly in magnitude from 0.500 T to 1.80 T in 1.10 s. What is the resulting induced current if the loop has a resistance of 2.20
Answer:
The magnitude of the induced current is 4.73 x 10⁻³ A.
Explanation:
Given;
number of turns, N = 1
cross sectional area of the loop, A = 8.8 cm² = 8.8 x 10⁻⁴ m²
change in magnetic field strength, ΔB = 1.8 T - 0.5 T = 1.3 T
change in time, Δt = 1.10 s
resistance of the loop, R = 2.2 ohm
The magnitude of the induced emf is calculated as;
[tex]emf = \frac{NA \Delta B}{\Delta t} \\\\emf = \frac{1 \times 8.8\times 10^{-4} \times 1.3}{1.10} \\\\emf = 1.04 \times 10^{-3} \ V[/tex]
The induced current in the loop is calculated as;
[tex]I = \frac{emf}{R} \\\\I = \frac{1.04 \times 10^{-3}}{2.2} \\\\I= 4.73 \times 10^{-4} \ A[/tex]
Therefore, the magnitude of the induced current is 4.73 x 10⁻³ A
Which of the following is a contact force?
Magnetic
Friction
Electric
Gravity
Answer:
magnetic
Explanation:
because magnetic attracted other magnetic by pulling them contact forcely that creates a strong force when they are nearly close to one another
what are three physical properties of gases
Answer: Gases have three characteristic properties: (1) they are easy to compress, (2) they expand to fill their containers, and (3) they occupy far more space than the liquids or solids from which they form. An internal combustion engine provides a good example of the ease with which gases can be compressed.
Explanation:
How does the current in a series circuit compare
An object is experiencing an acceleration of 0.4 m/s^2 while traveling in a circle of 35 m. What is it’s velocity?
Answer:
v = 3.74 m/s
Explanation:
Given that,
The acceleration of the object in circular path, a = 0.4 m/s²
The radius of the circle, r = 35 m
We need to find the velocity of the object. The acceleration of an object on the circular path is given by :
[tex]a=\dfrac{v^2}{r}\\\\v=\sqrt{ar} \\\\v=\sqrt{0.4\times35}\\\\v=3.74\ m/s[/tex]
So, the velocity of the object is equal to 3.74 m/s.
In a transverse wave, the distance from any two consecutive crest or any two consecutive troughs is called the
Answer:
Wavelength
Explanation:
Answer:
Wavelength if it's the horizontal distance. Wave Height if it's vertical distance.
Explanation:
The course an object travels along is called DIRECTION.
A
TRUE
B
FALSE
DO NOT WRITE DOWN NONSENSE OR YOU WILL BE REPORTED!!!!!!!!
In a mass spectrometer, a specific velocity can be selected from a distribution by injecting charged particles between a set of plates with a constant electric field between them and a magnetic field across them (perpendicular to the direction of particle travel). If the fields are tuned exactly right, only particles of a specific velocity will pass through this region undeflected. Consider such a velocity selector in a mass spectrometer with a 0.105 T magnetic field.
Part (a) What electric field strength, in volts per meter, is needed to select a speed of 3.8 × 106 m/s?
Part (b) What is the voltage, in kilovolts, between the plates if they are separated by 0.75 cm?
Answer:
a).[tex]$3.99 \times 10^5 \ v/m$[/tex]
b). 2.9925 kV
Explanation:
Given :
For mass spectrometer
The magnetic field = B
B = 0.105 T
a). Given speed, v = [tex]$3.8 \times 10^6 \ m/s$[/tex]
We known
[tex]$\frac{E}{B}=v$[/tex]
∴ [tex]$E= 3.8 \times 10^6 \times 0.105$[/tex]
[tex]$=3.99 \times 10^5 \ v/m$[/tex]
b). Now spectrometer, d = 0.75 cm
[tex]$d=0.75 \times 10^{-2} \ m$[/tex]
We known
[tex]$E=\frac{V}{d}$[/tex]
[tex]$V = E\times d$[/tex]
[tex]$V = 3.99 \times 10^5 \times 0.75 \times 10^{-2}$[/tex]
[tex]$V = 2.9925 \times 10^3 \ V$[/tex]
= 2.9925 kV
Plsss I want answer???
Answer:
s=136.89/2g meter
s=6.98 meter (correct to 3 sig.fig. taking g=9.81ms^-2)
Explanation:
u= + 11.7 ms^-1
a= - g ms^-2
At highest point: v=0ms^-1
v^2=u^2+2as
0=11.7^2+2(-g)s
s=136.89/2g meters