A student determines the mass of a 100 mL beaker filled with 50 mL of water to be 154.34 grams. After a tablet reacts with the water, the mass including the dissolved tablet is 157.26 grams. How much tablet was left in the beaker after the reaction

This type of irony called situational irony occurs when the expected outcome of a situation is completely opposite of what actually happens.

It is an unexpected twist of fate, where the actual outcome is in direct conflict with what was originally intended or expected. This type of irony is often used in literature to create suspense and humor, as the audience is often shocked and surprised by the unexpected ending.

Situational irony can also be used to highlight a greater theme or message in a story, such as the idea that life can be unpredictable and that sometimes the outcome of a situation is completely unexpected.

This type of irony is also often used in comedy, as the audience is taken by surprise when a joke is turned on its head and the expected outcome does not happen.

For more questions like Irony click the link below:

https://brainly.com/question/30126911

#SPJ4

The calculated amount of the hydrogen that is produced would be too low.

We should know that the question that we have here is going to so much border on the stoichiometry of the reaction. In this case, we are having the fact that A student accidentally added 15 mL of HCl to the eudiometer instead of 10 mL.

We know that the amount of the hydrogen that is produced would depend on the amount of the acid that is added and if an excess amount is added, the calculated amount would be too low because of this error.

Learn more about stoichiometry:https://brainly.com/question/30218216

#SPJ1

C12H22O11 has a mass composition of 42.1 percent, 6.48 percent hydrogen, and 51.4% oxygen.

By comparing an element's molar mass to the total molar mass of the compound as a whole, mass percent composition can be calculated. The final result of the calculation is a percentage that can be used to compare various compounds.

The exact number of atoms in the compound is shown by this formula.

The equation to calculate the percentage composition by mass of sodium is given below:

The exact number of atoms in the compound can be seen in this formula: mass of sodium = (22.99 g/mol) x (1 mole NaOH / 40.00 g/mol) = 0.5747 g % mass of sodium = (0.5747 g / 40.00 g/mol) x 100 = 1.43 % We can use the following equation to determine the percentage of the compound composed of oxygen by mass:

(mass of oxygen / molar mass of NaOH) x 100 = oxygen percentage = (16.00 g/mol) x (1 mole NaOH / 40.00 g/mol) = 0.400 g Oxygen percentage = (0.400 g / 40.00 g/mol) x 100 = 1.00% We can use the following equation to determine the percentage of hydrogen by mass:

(mass of hydrogen / molar mass of NaOH) x 100 = % mass of hydrogen % mass of hydrogen = (1.01 g/mol) x (1 mole NaOH / 40.00 g/mol) = 0.02525 g % mass of hydrogen = (0.02525 g / 40.00 g/mol) x 100 = 0.063% Na, 1.00% O, and 0.063% H The compound C12H22O11 has a  We can use the same approach as before to determine the percentage of C12H22O11's elements by mass.

Mass of Carbon = (1212.01) = 144.12 g Mass of Hydrogen = (221.01) = 22.22 g Mass of Oxygen = (11*16) = 176 g % Mass of Carbon = (144.12 / 342.30) x 100 = 42.1% % Mass of Hydrogen = (22.22 / 342.30) x 100 = 6.48% % Mass of Oxygen = (176 / 342.30) x 100.

To know more about Mass Composition, visit:

https://brainly.com/question/20393858

#SPJ1

The chemical formula for benzaldehyde is C6H5CHO.

Benzaldehyde is an arenecarbaldehyde composed of benzene with a single formyl substituent. The simplest aromatic aldehyde and family tree of the benzaldehyde class. It acts as a flavoring agent, fragrance, olfactory receptor agonist, and plant metabolite. The main effect of occupational exposure to benzaldehyde is irritation of the skin, eyes, and mucous membranes of the respiratory tract. Benzaldehyde is primarily used as a food and flavoring additive and can be found in many foods, including baked goods, frozen dairy products, fruit juices, soft candies, jelly puddings, soft drinks, alcoholic beverages, candies, and chewing gum. The chemical structure of benzaldehyde has benzene and aldehyde groups.

Learn more about benzaldehyde in

https://brainly.com/question/28146845

#SPJ4

When the e - liquid or the tobacco is heated in a vaping device , it will produces the aerosol. The user inhale the aerosol in their lungs.

The e - liquid or the tobacco when heated too much it will produces the aerosol. The e - cigarettes results in the production of the aerosol , when it heated too much. The liquid it contain is nicotine. The drugs cigarettes , the cigar and tobacco , flavoring helps to produces the aerosol.

Thus, when the e - liquid is heated too much it will results in the production of the aerosol.

To learn more about tobacco here

https://brainly.com/question/984821

#SPJ4

Absorption in digestion is the absorption of nutrients from the small intestine and it is important so that they can be used as energy by the body.

The digestive system is a process carried out by the digestive organ system to process food so that its nutrients can be absorbed by the body and converted into energy.

Absorption is the process of absorbing simple molecules/nutrients through the epithelial cells and villi that comprise them which are then carried into the bloodstream.

The small intestine is part of the digestive tract that completes the digestive process and absorbs nutrients. After food is completely digested both chemically by enzymes, most of the nutrients will be absorbed in the jejunum into the bloodstream which is then used for body energy. Nutrients are used by the body for growth and development, if the intestines cannot absorb nutrients, the body will not have the energy to grow and develop.

Learn more about digestive system at:

https://brainly.com/question/10457697

#SPJ4

The concept used to solve this problem is based on type of orbitals. The orbitals can be atomic, molecular and hybrid.

The atomic orbitals are the areas of space around the nucleus of an atom where an electron is expected to be found. The hybrid orbitals are the orbitals which are formed by mixing of atomic orbitals. The molecular orbitals are the orbitals which have bonding and antibonding orbitals.

Step: 1

The orbitals s, p, d and f are atomic orbitals. The electrons can be find in atomic orbitals. the electrons of an atom can be filled in s, p, d and f orbitals

Step: 2

The orbitals sp,sp2,sp3 and sp3d are hybrid orbitals. The hybrid orbital is formed by combination of atomic orbital.

Step: 3

The molecular orbitals are σ2s and π2p. The molecular orbitals are made up of bonding and antibonding orbitals.

To know more about orbitals here

https://brainly.com/question/14361631

#SPJ4

The mass of an ion that has 13 electrons, 12 protons, and 14 neutrons is 26 u (option C).

Mass number of an element is the total number of protons and neutrons in an atomic nucleus.

The number of protons and electrons of an atom is the number of positively charged and negatively charged subatomic particles in an atom respectively.

According to this question, an ion has 13 electrons, 12 protons, and 14 neutrons. The mass number can be got by summing the number of neutrons and protons in the atom as follows:

mass no = 12 + 14 = 26u

Therefore, 26 u is the mass of the ion described in this question.

Learn more about mass number at: https://brainly.com/question/18803094

#SPJ1

The manipulated variable in the global warming experiment is the air temperature.

The correct option is B.

Anything that is changeable is referred to as a variable. In other words, it's anything that can be changed, taken into account, or quantified in an experiment.

There are three types of variables in an experiment:

In the given experiment, the manipulated variable was the change in the location.

Learn more about independent variable at: https://brainly.com/question/82796

#SPJ1

Only steroids are included in the principal chemical structures of hormones. How atoms are organized within molecules is referred to as chemical structure.

By showing the spatial arrangement the atoms and chemical bonds within the molecule, chemical structure describes how a compound's molecular geometry is formed. A crucial visual depiction of a molecular formula is thus given to scientists in this way. The chemicals known as enantiomers are chiral and mirror-imaged.

When determining the structures of chemical compounds, one often strives to determine the pattern and strength of bonding between all of the atoms in the molecule; if possible, one also looks for the three-dimensional spatial coordinates of a atoms in the molecule.

To know more about chemical structures visit:

https://brainly.com/question/12166462

#SPJ4

Answer:

Explanation:

Use the definition of molality to guide you to find what is needed to solve for molality.

molality = mol of solute/kg of solvent

Step 1: Find molar mass of Na2SO4

Na: 2 x 23.00 g = 46.00 g

S: 1 x 32.06 g = 32.06 g

O: 4 x 16.00 g = 64.00 g

Molar mass of Na2SO4 = 142.06 g/mol

Step 2: Convert 10.0 g Na2SO4 into moles using molar mass of Na2SO4 from step 1.

10.0 g x (1 mol/142.06 g) = 0.070393 mol

Note that grams cancel and you are left with moles.

Step 3: Convert 1000.0 g of water into kilograms of water. Remember that 1000 g = 1 kg.

1000.0 g x (1 kg/1000g) = 1.0000 kg water

Note that grams cancel and you are left with kilograms.

Step 3: Use the definition of molality to find molality for this solution. The solute is Na2SO4. The solvent is water.

Definition of molality = mol of solute/kg of solvent

molality = 0.070383 mol/1.0000 kg

molality = 0.070393 m

There are 3 significant figures in 10.0 g and 5 significant figures in 1000.0 g. Use the least number of significant figures when multiplying or dividing. In this case 10.0 g has the least number of significant figures. The final answer with the correct number of significant figures is 0.0704 m.

The pressure of a gas is directly proportional to its temperature. Hence, as temperature decreases  pressure decreases. Therefore, option D is correct.

What is Gay- Lussacs law?

According to Gay- Lussacs law at constant volume, the pressure of a gas is directly proportional to the temperature.

Hence, P/T = constant.

Let P1 and T1 be the initial pressure and temperature and P2, T2 be the final quantities, then

P1/T1 = P2/T2

Given P1 = 1 atm

T1 = x ° C

T2 = x/2° C

Then P2 = P1 T2/T1

P2 = 1 × x/2° C / x° C

     = 1/2 atm

That is one half of the initial pressure.

Therefore, the pressure of the gas reduces to half when temperature is reduced to half. Thus, option D is correct.

Find more on Gay- Lussacs law:

http://brainly.com/question/2683502

#SPJ1

The theoretical yield in this instance is 280 kg, however the actual yield is only 70 kg. Consequently, the percent yield is calculated as follows: 25% = 70/280 x 100.

To learn more about yield refer to:

https://brainly.com/question/30242685

#SPJ4

8.00 moles is the total moles of [tex]4.82 * 10^2^4[/tex] atoms of helium gas. So, the correct option is (D).

The mole is defined as the amount of matter of a system containing as many elementary elements as atoms in 0.012 kg of carbon 12; Its symbol is "Mol". It consists of the amount of a substance which is [tex]6.022 * 10^2^3[/tex] units like particle, atom, ion, molecule etc. of the given substance where a mole measures the number of atoms, ions or molecules.

[tex]Number of moles= \frac{Number of molecules}{Avogadro's number}[/tex]

For above given information,

[tex]Number of moles=\frac{4.82 * 10^2^4}{6.023* 10^2^3}[/tex]

                         = 0.8002*10= 8.002 moles

Thus, 8.00 moles is the total moles of [tex]4.82 * 10^2^4[/tex] atoms of helium gas. So, the correct option is (D).

Learn more about Moles, here:

https://brainly.com/question/26416088

#SPJ1

The total moles of 4.82 x 10²⁴ atoms of helium gas is  8 moles . Hence, option (D) is correct.

The Avogadro constant is a proportionality factor that compares the number of constituent particles (typically molecules, atoms, or ions) in a sample to the amount of substance in that sample.

1 mole of Helium gas has 6.02 × 10²³.

Hence, 4.82×10²⁴ atoms of  Helium gas  refers =  ( 4.82×10²⁴ ÷  6.02 × 10²³) moles of  helium gas

= 8 moles of  helium gas.

The total moles of 4.82 x 10²⁴ atoms of helium gas is  8 moles .

Learn more about Avogadro constant here:

https://brainly.com/question/14637684

#SPJ1

A 1 liter volumetric flask can be filled with distilled water until it reaches the graduation mark, 58.44 g of NaCl and this amount of salt can be used to create a 1M solution of the salt.

In this case, we must determine the volume of the solution as well as the mass of sodium chloride (NaCl) required to make a 1 molar solution of the salt.

The molarity formula,  

Molarity=Moles of Solute Volume of Solution, must be used.

The whole solution, in steps:

The moles of NaCl must first be determined. The solution has a 1 M molarity and a 1 L volume.

As a result, moles of NaCl may be computed as,

1 liter of solution equals 1 mole of NaCl.

1 M x 1 L equals 1 mol of NaCl.

In light of this, there is one mol of NaCl in the solution.

Using the quantity of NaCl's moles, we must now determine the mass of NaCl.

Math processing error: Number of moles

58.44 g/mol is the molar mass of sodium chloride, which has a molecular weight of 1 mol.

Processing Error in Math

(Math Processing Error)

Processing Error in Math

So, to create a 1 M solution, we'll need 58.44 g of NaCl.

We will now talk about making a NaCl solution at a single molar strength.

A 1 liter volumetric flask can be filled with distilled water until it reaches the graduation mark, 58.44 g of NaCl and this amount of salt can be used to create a 1M solution of the salt.

To Learn more About NaCl refer To:

https://brainly.com/question/24878544

#SPJ4

Answer:2.7

Explanation:

5 seconds. 5x2=10.






(Don't know why you asked this here, the math is really simple)

To make 250.0 mL of something like a 0.500 mol/L sulfuric acid solution, 0.125 L of a 1.00 mol/L sulfuric acid solution is needed.

can cause blindness and irritate & irritate the skin and the eyes. Exposures may result in pulmonary edema, a genuine condition when fluid builds up in the lungs. Headache, nauseousness, and vomiting can all result after exposure.

Another important ingredient in the chemical process industries is sulfuric acid. It is most frequently employed in the production of fertilizer, but it is also crucial for the processing of minerals, oil, wastewater, and chemicals. H2S04, often known as sulfuric acid, is a corrosive chemical that harms your skin, eyes, teeth, & lungs. Extreme exposure can be fatal.

n1 = n2

CM = n / V

n = CM x V

CM1 x V1 = CM2 x V2

1.00 x V1 = 0.500 x 0.2500

V1 = (0.500 x 0.2500) / 1.00

V1 = 0.125 L

To know more about sulfuric acid visit:

https://brainly.com/question/30039513

#SPJ1

Answer: Example: Find the molecular of the water molecule. Solution: The formula of the water molecule is H₂O. The atomic mass of hydrogen = 1 amu. The atomic mass of oxygen = 16 amu. Molar mass of water = 2 *1 + 16 = 18 amu. Example: What will be the relative molar mass of the hydrogen molecule. Solution: Hydrogen molecule represented by H₂.

hope this works

The Born -Haber cycle is  used to find out the lattice energy and formation enthalpy of a reaction from its individual steps. The total energy of the cycle is zero.

According to Hess law, we can split a reaction into several steps. each steps involves the phase transitions, ionization of constituent elements.

The energy required form a solid compound from its constituent elements in gaseous state is called the lattice energy of the compound. Here the formation of KBr from gaseous K and Br is given. Thus the enthalpy change is called lattice energy.

The lattice energy plus the formation energy is called the total energy in the reaction. Where, the enthalpy change of the cycle is zero. The Born -Haber cycle of the given reaction include first reaction with the phase transition of each elements and their ionization.

The ionized atoms combine together to form the product, which is written as the overall reaction in the top.

Find more on Hess law:

https://brainly.com/question/14561923

#SPJ1

285 grams of acetylene at standard temperature and pressure (STP) have a volume of 24.45 liters.

To find the volume of a gas at standard temperature and pressure (STP), you can use the ideal gas law: PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature.

STP is defined as 0 °C (273.15 K) and 1 atm (101.325 kPa)

First, we need to find the number of moles of acetylene. To do this, we use the molar mass of C2H2 which is 26.04 g/mol

n = m / M

n = 285 g / 26.04 g/mol

n = 10.9 moles

Then we can use the ideal gas law to find the volume in liters:

V = nRT / P

V = (10.9 moles) * (0.08206 Latmmol^-1*K^-1) * (273.15 K) / (101.325 kPa)

V = 24.45 L

Therefore, 285 grams of acetylene at standard temperature and pressure (STP) have a volume of 24.45 liters.

Learn more about gas law in brainly.com/question/12669509

#SPJ1

To make the buffer solution, 0.198 moles of sodium acetate are required (from which the conjugate base will be formed). The correct response is (C) 0.198 moles.

A highly important unit of measurement used by chemists is the mole. A mole of anything means you have 602,214,076,000,000,000,000,000 of that thing, just like a dozen eggs equals twelve eggs. Chemists use moles to measure incredibly small substances like atoms, molecules, and other particles.

How many moles of a chemical are there? The substance's weight should be determined. See a periodic table to find its atomic or molecular mass. Subtract the weight from the mass of the atoms or molecules.

To know more about moles visit:

https://brainly.com/question/26416088

#SPJ1

Molecular compounds are formed by covalent bonds between two nonmetal atoms. The formula for molecular compounds is AB, where A and B are the two nonmetal elements.

Molecular compounds are formed when two or more atoms join together to form a single molecule. They are held together by a strong chemical bond known as a covalent bond. The atoms can be from the same element or from different elements. Examples of molecular compounds include water, carbon dioxide, and methane. Molecular compounds are essential for life and are found in many everyday products. For example, table sugar is a molecular compound made up of carbon, hydrogen, and oxygen atoms.

To learn more about molecular compounds
https://brainly.com/question/14018732
#SPJ1

Answer:

Both neutrons and protons

Explanation:

Both neutrons and protons are assigned as having masses of 1 amu each. In contrast, the electron has a negligible mass of . 0005 amu.

TRUE , Auxiliary containers must be labeled, excluding a few circumstances. LABEL IT IF If a secondary container was transportable, for instance, you are frequently exempt from label requirements.

Chemicals are typically transferred from primary container to secondary containers while within the workplace. These smaller containers can be spray bottles, containers, aliquots, or jars. OSHA states that secondary containers must adhere to the labeling specifications.

The identification of the product's hazardous substances and any physical, health-related, nor environmental risks that may be posed by its constituent parts are the two pieces of information that must be provided on the secondary labels.

To know more about secondary container visit:

https://brainly.com/question/2989619

#SPJ4

The experiment will only result in a maximum of 280 grams of iron (Fe) being produced.

The mineral iron is essential to our bodies for a number of processes. As an illustration, iron is a constituent of hemoglobin, a chemical that transports oxygen from our lungs to each and every tissue in our bodies. It helps our muscles get oxygen and store it. Iron is also present in many other enzymes and enzymes. Your body needs iron in the right amount.

Another form of protein called hemoglobin, which is present throughout red plasma cells and carries the oxygen from your lungs to every of the body, contains a sizable quantity of iron. If the body doesn't have enough iron, it won't produce enough red blood cells to deliver oxygen, which leads to fatigue.

equation of the reaction:

Fe₂ O₃ + 2Al --> 2Fe + Al₂ O₃

mole ratio of Fe₂ O₃ to Al = 1:2

5 moles Fe = 5 x 56

= 280 grams

To know more about iron visit:

https://brainly.com/question/24645617

#SPJ1

The answer to the question is D: Ribosome

50 grams of AgCl (Silver Chloride) will produce 39.2 grams of silver when the AgCl is processed.

Silver chloride (AgCl) is an inorganic compound composed of silver and chlorine. It is a white powder or crystalline solid that is insoluble in water, alcohol, and other organic solvents. Silver chloride is used mainly in photography and in the production of specialized glass. Silver chloride has been used in the past to make silver plating, silver salts and silver jewelry. Silver chloride has been used in various medical treatments, including eye drops and ointments, as an antiseptic and to treat skin disorders.

The process involves reacting the AgCl with either a reducing agent or a disproportionation reaction. The reaction produces Ag (silver) and Cl2 (chlorine gas). The silver produced accounts for approximately 78.4% of the original AgCl mass. Therefore, 39.2 grams of silver can be produced from 50 grams of AgCl.

To learn more about Silver Chloride
https://brainly.com/question/20529522
#SPJ1

Molar mass: According to the answer you need 3.0 g of Al to make 15 g of AlCl3.

Molar mass is the mass of a given substance (chemical element or compound) divided by the amount of substance in moles. It is usually expressed in grams per mole (g/mol). Molar mass is an important concept in chemistry, as it is used to calculate the mass of a substance from the amount of moles of the substance. It is also used to calculate the amount of moles of a substance from the mass of the substance. Molar mass is also used to calculate the density of a substance, as well as the molar volume of a substance.

Molar mass of Al = 27 g/mol
Molar mass of AlCl3 = 133 g/mol
To make 15 g of AlCl3, you need 15/133 = 0.112 mol of AlCl3.
To make 0.112 mol of AlCl3, you need 0.112 mol of Al.
Therefore, you need 0.112 mol of Al x 27 g/mol = 3.0 g of Al.
Therefore, you need 3.0 g of Al to make 15 g of AlCl3.

To learn more about Molar mass
https://brainly.com/question/21334167
#SPJ1

Answer:

Explanation:

Greetings !!!

First let's define the meaning of molecular mass.

Molar mass M is the mass of a chemical compound divided by its amount-of-substance measured in moles. It is defined as MB = m/nB, where m is the total mass of a sample of pure substance and nB is the amount of substance B given in moles. The definition applies to pure substance.

For the first question

solution

The atomic mass of carbon(C)= 12

The atomic mass of Hydrogen(H)= 1

The atomic mass of Oxygen(O)= 16

Molecular mass of sucrose(Table sugar)C₁₂H₂₂O₁₁=

12×(The atomic mass of carbon(C)) + 11×(The atomic mass of Hydrogen(H)) + 11×(The atomic mass of Oxygen(O))

Molecular mass of sucrose = 12×12+22×1+11×16

=144 + 22 + 176

=342g/mol

Secondly, when we look at percent composition first let's define it :-

So, let's work on the questions

%Compositions

Carbon= 144/342×100 = 42.1%

Hydrogen = 22/342×100= 6.43%

Oxygen = 176/342×100= 51.46%

And to be more sure add those percent values

Thus, 42.1%+6.43%+51.46%= 99.99%

If you have any questions and unclear ideas tag it on comments

Hope it helps!!