Answer:
I disagree with the student's claim
Explanation:
From basic chemistry, the rate of chemical reaction increases with an increased surface area.
This simply means that a powdered substance will react faster than a small pellet of the same substance.
Let us break this down further. The pellet has a smaller exposed surface per grain to the solvent, here is how. Imagine the powdered substance bunched up together to make the small pellet, grains at the center of the pellet is blocked by other grains around it, and will take time before it comes in contact with the solvent. For the powdered grains, each grain has a surface independently exposed to the solvent and can easily come in contact with the solvent, taking less time to react with the solvent.
Technically, a powdered substance has more exposed surface area and logically will take a shorter time for the reaction to be complete.
Which compound is part of the structure of another compound listed?
A. amino acids
B. nucleic acids
C. proteins
Answer:
i think its a
Explanation:
nucleic acids are dna and rna
amino acids are the 4 nuecleotides in dna or rna
Answer:
amino acids i think
Explanation:
what is abbreviated structural formula of the 2-metil-5-isopropiloctan?
Answer:
CH3
|
CH3- C H -CH2-CH2- CH - CH2-CH2-CH3
|
CH
/ \
CH3 CH3
Explanation:
Octan
C-C-C-C-C-C-C-C
Metyl
CH3 -
Isopropyl
CH3
/
- CH
\
CH3
2-metil-5-isopropiloctan
CH3
|
CH3- C H -CH2-CH2- CH - CH2-CH2-CH3
|
CH
/ \
CH3 CH3
how do convection currents help make underwater mountains
Answer:
As they move away from each other the force makes it leave a gap between them. And the convection currents push up a lot of magma towards the surface. The magma cools of very quickly in the water. Forming rocks constantly, rocks that little by little start to make a big mass, that eventually turns into an underwater mountain, or rather a mid-ocean ridge.
(Hope this helps) Sky
As a result of the interaction of 22 g of higher oxide of the element of the main subgroup of group IV with water, 31 g of acid was formed. Set the name of an unknown chemical element.
Answer:
Carbon (C)
Explanation:
Because the element is the element of the main subgroup of group IV , it has oxidation number +4 in the oxide, and oxide formula is EO2.
reaction:
EO2 + H2O ---> H2EO3
from reaction 1 mol 1 mol 1 mol
31 g acid - 22 g oxide = 9 g water
M(H2O) = 18 g/mol
9g * 1 mol/18 g = 0.5 mol H2O
As we see from reaction molar ratios EO2 : H2O : H2EO3 = 1 : 1 : 1,
so if we have 0.5 mol H2O , we also have 0.5 mol EO2.
0.5 mol EO2 has mass 22 g.
Molar mass(EO2) = mass/ number of moles = 22 g/ 0.5 mol = 44 g/mol
Molar mass (EO2) = M(E) + 2M(O) = 44 g/mol
M(E) + 2 *16 g/mol = 44 g/mo
M(E) = 44-32 = 12 g/mol
Molar mass 12 g/ mol is molar mass of carbon.
So, element is carbon (C).
Ok you smarties please HELP ME
What is the molar concentration of a solution that contains 2.4 mol in 175 mL solution?
Answer:
[tex]M = 13.714\,\frac{mol}{L}[/tex]
Explanation:
The molarity is the ratio of moles solute to volume of solution. Then,
[tex]M = \frac{2.4\,mol}{\left(175\,mL\right)\cdot \left(\frac{1}{1000}\,\frac{L}{mL} \right)}[/tex]
[tex]M = 13.714\,\frac{mol}{L}[/tex]
Answer:
[tex]M=13.7\frac{mol}{L}=13.7M[/tex]
Explanation:
Hello,
In this case, we define the molar concentration or widely known as molarity as the ratio of the moles of the solute to the volume of the solution in litres. Thus, for the computation of the molar concentration we make sure we have litres:
[tex]V_{solution}=175mL*\frac{1L}{1000mL} =0.175L[/tex]
Next, we can compute the molarity in mole per litre or just molar units by:
[tex]M=\frac{n_{solute}}{V_{solution}} =\frac{2.4mol}{0.175L} \\\\M=13.7\frac{mol}{L}=13.7M[/tex]
Best regards.
What is the formula for an ionic compound that is composed of potassium and oxygen?
Answer:
Ty for free points :)
Explanation:
If nitrogen gas is collected over water at 20 o C and the total pressure of the gas in the collection vessel is 200 kPa, what is the pressure of dry nitrogen gas?
Answer:
Explanation:
pressure of dry nitrogen gas at 20° = Partial pressure of nitrogen and partial pressure of water at that temperature .
The pressure of dry nitrogen gas= total pressure - vapour pressure of water at 20°C
= 200 k Pa - 2.34 k Pa
= 197.66 kPa.
Which of the following shows the solution set to the quadratic equation 8x2+40x=0
Answer:
Option 2
Explanation:
There are many ways to do it. You can also just use your scientific calculator to directly get the answer. But now I'm going to solve the equation by factoring.
8x² + 40x = 0
Factor out 8x from the expression
8x ( x + 5 ) = 0
Divide both sides by 8
8x ( x + 5 ) ÷8 = 0 ÷8
x ( x + 5 ) = 0
Now we have two factors, x & x+5. Set each factors equal to zero
x = 0
x + 5 = 0
Now solve the equation
x = 0
x = -5
Then you get the answer!
Os etapas que devem sem compridas para obter separadamente os componentes (a as substâncias ) de uma mistura de água ,sal e areia ,são respectivamente : A) filtração e sifonação B) decantação e sifonação C) filtração e destilação simples D) catação e decantação
Answer:
The steps that must be long to obtain separately the components (to the substances) of a mixture of water, salt and sand, are respectively: A) filtration and siphoning B) decanting and siphoning C) simple filtration and distillation D) collection and decantation.
Simple filtration and Siphoning is the method. When an insoluble solid is present in a liquid. Filtration is the ideal method of separation,The sand is filtered by the filtered paper as water is allowed to pass through the filter paper into a beaker where the funnel which hold the filter paper emptied into.
Water molecules is Siphoned, pull by force of gravity through the sand, past the filter paper to emerge as clean in the beaker below.
Given 700 ml of oxygen at 7 ºC and 106.6 kPa pressure, what volume does it take at 27ºC and 66.6 kPa pressure
Answer:
The volume is 1.2L
Explanation:
Initial volume (V1) = 700mL = 0.7L
Initial temperature (T1) = 7°C = (7 + 273.15)K = 280.15K
Initial pressure = 106.6kPa = 106600Pa
Final temperature (T2) = 27°C = (27 + 273.15)K = 300.15K
Final pressure (P2) = 66.6kPa = 66600Pa
Final volume (V2) = ?
To solve this question, we need to use combined gas equation which is a combination of Boyle's law, Charles Law and pressure law.
(P1 × V1) / T1 = (P2 × V2) / T2
solve for V2 by making it the subject of formula,
P1 × V1 × T2 = P2 × V2 × T1
V2 = (P1 × V1 × T2) / (P2 × T1)
V2 = (106600 × 0.7 × 300.15) / (66600 × 280.15)
V2 = 22397193 / 18657990
V2 = 1.2L
The final volume of the gas is 1.2L
The Earth's diameter at the equators is _____ its diameter at the poles. A:greater than B:equal to C:less than
Which word equation shows hydrogen reacting with oxygen to form water?
oxygen + water Right arrow. hydrogen
hydrogen + oxygen Right arrow. water
oxygen + water Right arrow. hydrogen + water
hydrogen + water Right arrow. oxygen
Answer: hydrogen + oxygen Right arrow .water
Explanation:
The exact equation for this reaction is;
2H2 + O2 -------------> 2H2O
hydrogen + oxygen Right arrow. water is the correct option.
The equation shows hydrogen reacting with oxygen to form water is as follows:-
[tex]2H_2+O_2\rightarrow2H_2O[/tex]
The above reaction in word form is written as follows:-
[tex]hydrogen+Oxygen \rightarrow water[/tex]
So, hydrogen + oxygen Right arrow. water is the correct option.
Hydrogen-H
Oxyden-O
Water-[tex]H_2O[/tex]
To know more about:-
brainly.com/question/2088210
The rules of engagement (roe) working group is often used to _____. (select all that apply.)
Answer:
proactively develop ROE as well as responding to requests for additional ROE measures
Explanation:
The rules of engagement (roe) working group is a group who's main job is to proactively develop ROE as well as responding to requests for additional ROE measures. Rules of Engagement are a set or rules or directives for military soldiers that define the circumstances, conditions, degree, and manner in which the use of force can be used.
A quantity of Lithium reacts with sulfuric acid (H2SO4) to produce .10 g of hydrogen. How many grams of lithium are required ?
Answer:
0.35 g Li
Explanation:
H2SO4 + 2Li -> Li2SO4 + H2
7 g Li -> 2 g H2
x -> 0.10 g H2
x= (0.10 g H2 * 7 g Li)/ 2 g H2 x= 0.35 g Li
Which elements occupy the same group in the periodic table?
O A. Elements that share the same row
O B. Elements that share the same inside electrons
O C. Elements that share the same period
O D. Elements that share the same column
Answer: The answer is D. Elements that share the same column
Explanation:
The elements occupying the same groups are sharing the same column. They have similar chemical and physical properties. Elements of the same group have the same number of valence electrons.
What is group in periodic table?All elements are classified to different groups and periods. The horizontal rows in the table is called periods and the vertical column are called groups in periodic table.
There are 18 groups and 7 periods in periodic table. The atomic number increases from left to right along a period. Elements in a group are having same number of valence electrons and are having similar chemical and physical properties.
Elements in a groups shows similarity in reactivity and physical properties. They show same trend in increasing or decreasing nature of physical quantities. A group is thus, representing a column in periodic table. Therefore, option D is correct.
To find more on groups in periodic table, refer here:
https://brainly.com/question/29761108
#SPJ5
In the early twentieth century , what was alexander fleming's hypothesis concerning the relationship between a yellow green mold and certain strains of bacteria
Answer:
Explanation:
Alexander Fleming's hypothesis was that the juice that was produced by the mold that appeared in the petri dishes was killing the bacteria growing there (streptococcus, meningococcus and the diphtheria bacillus).
Answer:
He thought the mold had released a chemical that prevented the bacteria’s growth.
Explanation:
Gradpoint
Chemistry Problem
1234567890-
Answer:
what?
Explanation:
whats the answer
Answer:
oh yea! keep up the great work buddy!!
Explain how electron microscopy and scanning tunneling microscopes have contributed to the understanding of atoms.
Answer:
Electron microscopy and scanning tunneling microscopes contributed to the understanding of atoms in understanding atomic structure.
The electron microscope has magnifications of about 100,000x.
This helped the scientists to have accurate image groupings of the atoms. Scanning tunnel microscope helped scientists to have the images of groups of atoms.
please help tq !! A B C or D ?????
Answer:
i think that the answer should be option D as the mole value is also greatest
A solution is made by diluting a standard solution by adding 25 mL of the standard solution to 75 mL of distilled water. What is the concentration of the resulting solution?
Answer:
The concentration of the resulting solution is 0.25 or one quarter of the standard solution
Explanation:
Whereby the molar concentration of the standard solution is P molar per liter, we have
25 ml of the standard solution contains
25/1000×P moles of the standard solution such that the resultant solution has a volume of 25 + 75 = 100 ml contains 0.025 P moles of the standard solution
The concentration of a solution is the number of moles contained per liter, which gives
100 ml contains 0.025 P moles
1 liter = 1000 ml will contain 1000/100 × 0.025 = 0.25 P moles of the stanard solution
Therefore, the concentration of the resulting solution is 0.25 or one quarter of the standard solution.
Clasifica los siguientes elementos en metales, no metales, metaloides , o gases , nobles : flúor , azufre , nitrogeno , cloro , magnesio , helio , sodio , bromo , silicio , telurio
Answer:
Translation:
Classify the following elements into metals, nonmetals, metalloids, or gases, noble : fluorine, sulfur, nitrogen, chlorine, magnesium, helium, sodium, bromine, silicon, tellurium.
Metals: magnesium and sodium.Nonmetals: fluorine, chlorine, bromine, sulfur and nitrogen.Metalloids: silicon and tellurium.Noble gases: helium.Explanation:
Metals: They occupy the left and central areas of the Periodic Table; therefore, they constitute a majority group of the elements.
Nonmetals: They are located in the upper right region of the Periodic Table.
Within the Periodic Table, the metalloids lie diagonally from boron to polonium. Items above on the right are nonmetals, and items below on the left are metals.
The noble gases are located in group 18 of the Periodic Table.
Answer:
fluorine: it is a gas at room temperature
sulfur: it is a metal
nitrogen: it is a diatomic gas
chlorine: it is a halogen
helium: it is a gas
sodium: alkali metal
magnesium: metal
bromine: halogen
silicon: metalloid
tellurium: it is a semi-metal
Explanation:
the grouping of the chemical compounds respect a location in the periodic table, and this classification exists since all the compounds have different behaviors, different melting and boiling temperatures and even different valence, oxidation, atomic masses.
Most of the costs associated with using renewable resources are due to
a. overuse of resources
b. atmospheric pollution
C. lack of availability
d. global warming
Please select the best answer from the choices provided
A
B
С
OD
Answer:
a. overuse of resources is the correct answer.
Explanation:
Renewable resources are available and they are abundant but overuse of these renewable resources will have a negative effect on the surroundings and humans.
Overuse of renewable resources will leads to the depletion of these renewable sources in the future and will also make the ecosystem unbalance.
Renewable resources are solar energy, geothermal energy, biomass energy, wind energy, hydro energy.
Thus renewable resources are threatened due to overuse and it must be carefully used.
You are provided with a beaker, wire, two nails, battery, bulb and dilute soultions of HCl, HNO3, alcohol and glucose. How will you identify the acids from the given solutions using the given materials?
Answer:
Acid solutions will be those which lights up a bulb when a circuit is connected through them.
Explanation:
Acid solutions such as HCl and HNO3 are polar in nature and permits the flow of electricity through them. Whereas non-polar solutions like ethanol and glucose solution will not allow the flow of electricity through them.
Therefore, when an electric circuit is completed by dipping the nails connected to a battery and a bulb into the different solutions, the lighting up of the bulb indicates which solutions are acids.
90 grams of glucose, C6H12O6, is dissolved in 2 liters of solution. Determine the molarity (M).
Answer:
0.25 M
Explanation:
The first step is to determine how many moles of glucose there are, which means first finding out the molar mass of glucose. Carbon has a molar mass of about 12, hydrogen 1, and oxygen 16, so the total molar mass of glucose is about 6(12)+12(1)+6(16)=180 grams. This means that 90 grams is half a mole. Half a mole of substance divided by two liters of solution is (1/2)/2=1/4, or a molarity of 0.25. Hope this helps!
Why do solids expand on heating?
Explanation:
The molecules of solids are shrinked in there normal state . but as a heat energy is produced , the molecules starts curating fast and fast as temperature goes up . since they vibrate , they hit and collide each other breaking the bondings this increases the surface of area of the solid , and molecules consumes that space and they expand .
A 2-column table with 3 rows. Column 1 is labeled Substance with entries upper O subscript 2, upper N subscript 2, upper C upper O subscript 2. Column 2 is labeled Molar mass with entries 32.00 grams per mole, 28.02 grams per mole, and, 44.02 grams per mole.
For each pair below, select the sample that contains the largest number of moles.
Pair A
2.50 g O2
2.50 g N2
Answer:
2.50 g N2 and the second one is 21.5 g N2
Explanation:
just answered it and it was correct
How many moles of ammonium sulfate, (NH4)2SO4, can be made from the reaction of 30.0 mol of NH3?
Find the pH of HCl with a concentration of 0.00006M
Round to the nearest whole number
Answer:
4.22
Explanation:
pH stands for potential hydrogen. The letter “p” denotes potential and the letter “H” denotes hydrogen.
pH helps to find the acidity or alkalinity of an aqueous solution.
The number of hydrogen ions (protons) present in a solution is determined by the pH scale.
A pH greater than 7 makes the water more alkaline and a pH less than 7 makes the water more acidic.
[tex]pH=-\log [H^+]=-\log [0.00006]=4.22[/tex]
if I have 22.1 grams of CO2 gas at -188 degrees Celsius and 165 ml what is the pressure of the gas in kPa
Answer:
P = 2.145kPa
Explanation:
Mass = 22.1g
Molar mass of CO2 = 44g/mol
Vol = 165mL = 0.165L
T = -188°C = (-188 + 273.15)K = 85.15K
R = 8.314J/mol.K
From ideal gas equation,
PV = nRT
P = pressure of the ideal gas
V = volume the gas occupies
n = number of moles if the gas
R = ideal gas constant
T = temperature of the gas
n = number of moles
n = mass / molar mass
n = 22.1 / 44 = 0.50moles
PV = nRT
P = nRT/ V
P = (0.5 × 8.314 × 85.15) / 0.165
P = 2145.26Pa = 2.145kPa
Pressure of the gas is 2.145kPa