a steam iron draws 5 a from a 120 v line. how much internal energy is produced in 53 min? Answer in units of J.
1b.
How much does it cost at $0.85/kW·h to run the steam iron for 49 min?
Answer in units of cents.

Work is equal to energy. Since your braking distance is 10.8 m. you will not stop before you hit the oil spill

Energy is the ability to do work. The work done on an object is tantamount to energy used on the object.

If you are first place in Mario Kart at the moment. Your 5.0 kg Mario Kart is moving at 5.5 m/s when you see an oil spill 10 m ahead. If your maximum braking force is 7.0 N, will you stop before you hit the oil spill? What is your braking distance?

By using the concepts of work and energy, that is,

1/2mv² = F × s

Where

Substitute all the parameters into the formula

1/2 × 5 × 5.5² = 7 × s

75.625 = 7s

s = 75.625/7

s = 10.8 m

Since the calculated distance is greater than the given distance (10 m), you will not stop before you hit the oil spill. And your braking distance will be 10.8 m

Therefore,  you will not stop before you hit the oil spill.

Learn more about Energy here: https://brainly.com/question/15896499

#SPJ1

Ahmed should use Dish A because it has greater exposed surface area than Dish B, hence the hot water vapour from the jelly will evaporate faster and the jelly will cool faster.

Evaporation is the process through which water gains heat and escape from the liquid surface in form of vapour.

There are three basic factors that affects the rate of evaporation, and they include;

The greater the exposed surface area of the container, the greater the rate of evaporation.

The exposed surface area of Dish A is calculated as;

A = 30 cm x 45 cm

A = 1,350 cm²

The exposed surface area of Dish B is calculated as;

B = 15 cm x 40 cm

B = 600 cm²

Learn more about evaporation here: https://brainly.com/question/25310095

#SPJ1

The friction force acting on the bag is 19.1 N. The result is obtained by using Newton's first law.

Newton's first law states that every object will remain at rest or keep constantly moving in a straight line unless an external force acts upon it.

The equation of Newton's first law can be expressed as

∑F = 0

Where ∑F is net force.

A man drag a bag of mulch at a constant speed.

The given parameters are

Find the friction force (fs) acting the bag!

See the illustration picture in the attachment!

We calculate the parallel forces to find fs.

The mulch is moving at a constant speed. It means that the net force is zero.

∑F = 0

F cos θ - fs = 0

F cos θ = fs

fs = 22.5 × cos 32°

fs = 22.5 × 0.85

fs = 19.1 N

Hence, the friction force is 19.1 N.

Learn more about Newton's first law here:

brainly.com/question/30163174

#SPJ4

In engineering field and the Physics of elasticity, compressibility is the inverse of bulk modulus

Compressibility in a lay man language can be refer to the application of pressure on an object in order to reduce the size of the object.

But in the field of engineering, compressibility can simply be define as a reciprocal of bulk modulus of an elastic material.

Bulk Modulus = Force / Area in which the S.I unit will be N/m²

Since compressibility is the inverse of bulk modulus, its S.I unit will be reciprocal of the bulk modulus unit. That is,

m²/N which is also known as Byjus

Therefore, the S.I unit of compressibility is Byjus

Learn more about Bulk Modulus here: https://brainly.com/question/12975554

#SPJ1

The acceleration of the soccer ball is determined as 400 m/s².

The acceleration of the soccer ball is calculated by applying Newton's second law of motion as follows;

Mathematically, the formula for Newton's second law of motion is given as;

F = ma

where;

The acceleration of the soccer ball is calculated as;

a = ( F ) / ( m )

a = ( 200 N ) / ( 0.5 kg )

a = 400 m/s²

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

Amy is right in saying that blowing the tea will cool it down.

When you blow on a hot liquid, such as tea, the air you blow over the surface of the liquid carries away some of the heat energy from the liquid. This causes the liquid to cool down. The cooling effect is greater the greater the difference in temperature between the liquid and the air.

Blowing on a hot object cools it down by increasing the rate of heat transfer from the object to the surrounding air. Heat is transferred from a hotter object to a cooler one through conduction, convection, and radiation. When you blow on a hot object, the air you blow over the surface of the object carries away some of the heat energy from the object through the process of convection.

So, blowing on the tea will help cool it down faster which means Amy is correct in suggesting that blowing on the tea can help cool it down.

Find out more on  tea at https://brainly.com/question/2565291

#SPJ1

The answers include the following below:

These are elements that have partially filled d orbitals and occupy a central block in the periodic table.They have high melting points and boiling points and are good conductors of heat and electricity.

There are thirty eight elements in this group and only three is able to produce a magnetic field and they include iron, nickel and cobalt.

Read more about Transition metal here https://brainly.com/question/12843347

#SPJ1

The minimum value of the coefficient of static friction is 0.87.

The minimum value of the coefficient of static friction is calculated by applying the formula for Newton's second law of motion as shown below.

Mathematically, the formula for Newton's second law of motion is given as;

F (net) = ma

Wsin (θ) - μW cos (θ) = ma

Where;

Wsin (θ) - μW cos (θ) = ma

mgsin (θ) - μmg cos (θ) = ma

gsin (θ) - μg cos (θ) = a

If the block is stationary, then acceleration of the block = 0

gsin (θ) - μg cos (θ) = 0

μgcos (θ) = gsin (θ)

μ =  gsin (θ) / gcos (θ)

μ =  sin (θ) / cos (θ)

μ =  tan (θ)

The minimum value of the coefficient of static friction is calculated as;

μ =  tan (41)

μ =  0.87

Learn more about coefficient of friction here: https://brainly.com/question/20241845

#SPJ1

Answer:

Below

Explanation:

d = 1/2 a t^2

.80 = 1/2 ( 5.8 x 10^?) t^2  

  ( I think you left off the exponent...and acceleration has units m/s^2  ...not m/s)

t =  .166 s

v = at = 58 x .166= 9.63 m/s

The speed of the two-cart system’s center of mass during the collision in Trial 1: Does not change, and in Trial 2: Decreases.

In Trial 1 of the experiment, the carts collide elastically and the speed of the two-cart system's center of mass does not change during the collision. In Trial 2, the carts stick together and the collision is inelastic. Some of the kinetic energy is converted into internal energy, resulting in a decrease in kinetic energy and the speed of the center of mass. In conclusion, the speed of the center of mass does not change during the collision in Trial 1, but, decreases in Trial 2 as a result of a decrease in the kinetic energy.

To learn more about center of mass visit: https://brainly.com/question/29145830

#SPJ4

This reduces the force of the impact on the egg, limiting the amount of damage it receives.

What is force ?

Force is an influence that can cause a change in the motion, direction, or shape of an object. It is a vector quantity, meaning it has both magnitude and direction. Forces are a result of interactions between objects, and can either be a push or a pull.

Force can cause an object to accelerate, decelerate, or remain in its current state of motion. Examples of forces include gravity, friction, electromagnetism, and the normal force. Force is measured in units of Newtons (N).

To learn about more force .

https://brainly.com/question/12970081

#SPJ1

D) Amplitude is increasing from A to E. The amplitude of a wave is the maximum displacement of the wave from its equilibrium position. As we move from wave A to wave E, the maximum displacement of the wave increases, indicating that the amplitude is increasing.

Equilibrium position is a state of balance in which the forces acting on an object are equal and opposite, resulting in no net force and no acceleration. This means that the object is not moving and is in a stable position. In physics, equilibrium is a state of balance between two or more forces, such as gravity, friction, and tension. When an object is in equilibrium, the sum of all forces acting on it is zero. Examples of equilibrium positions include a book resting on a table, a ball suspended in mid-air, and a person standing still.

To learn more about equilibrium position
https://brainly.com/question/2286007
#SPJ1

Answer: The correct answer is C. It is a series of organized steps that one can use to answer a question or solve a problem

Explanation: The scientific method is a system of gathering and analyzing data that is used to answer questions and form theories. It includes steps such as formulating hypotheses, conducting experiments, collecting data, analyzing data, and forming conclusions. It is a useful tool for scientists to investigate and understand the world around them.

To find the number of revolutions the tire makes during this motion, we need to calculate the distance traveled by the tire and divide it by the diameter of the tire.

First, we need to find the distance traveled. This can be calculated using the formula:

distance = (initial velocity + final velocity)/2 * time = (0 + 21.4 m/s)/2 * 5.1s = 110.7m

Next, we need to convert the diameter of the tire from cm to m.

diameter = 38.2 cm / 100 cm/m = 0.382 m

Now we can calculate the number of revolutions by dividing the distance traveled by the diameter of the tire:

revolutions = distance / diameter = 110.7m / 0.382 m = 290.64

Therefore, the tire makes 290.64 revolutions during this motion

Note that it is assuming that the tire is not slipping. When the tire is slipping, this result can be different.

An inductor and a resistor are connected in a simple series circuit. If the inductance increases, the current in the circuit decreases. The correct answer is b.

An inductor is a passive component that stores energy in a magnetic field when electric current flows through it. In a series circuit, the current flows through both the inductor and the resistor. When the inductance of the inductor increases, the opposition to the current flowing through it also increases, known as inductive reactance. This results in a decrease in the current flowing through the circuit, as more energy is being stored in the magnetic field of the inductor and less is available to flow through the resistor.

To learn more about series circuit visit: https://brainly.com/question/19865219

#SPJ4

Answer:

F

=

m

Δ

v

t

force = mass * change in velocity / time

at

1

s:

mass:

40

kg

change in velocity (taking downwards as a positive direction):

4

m/s to rest

=

4

−

0

=

4

m/s

time:

1

s

m

Δ

v

t

=

160

1

=

160

force applied

=

160

N

at

0.1

s:

m

Δ

v

t

=

160

0.1

=

1600

force applied =

1600

N

Answer:

Aaaasaasaaaaaaaaaaaaaaaaaaaaaaaaa

Answer:

is a

Explanation:

In order to find the magnitude of the electric field at the origin, you need to use the equation E = q/4πεr², where q is the charge, ε is the permittivity of space, and r is the distance from the origin.

To calculate the electric field, you must first determine the charge of the particle, then determine the distance to the origin, and finally, use the equation to calculate the magnitude of the electric field.

Once you have the magnitude of the electric field at the origin, you can then use it to explore the behavior of other electric fields in the area.

To calculate the magnitude, you must first determine the values of k, q, and r, then plug them into the equation and solve. The resulting answer will be the magnitude of the electric field at the origin.

To learn more about magnitude, click here:

https://brainly.com/question/15681399

#SPJ4

The force exerted by the biceps muscle would be equal to the weight of the carton of milk, which is 2.00 kg or 19.6 Newtons of force.

What is the force?

Force is an action that can cause an object to move, stop, or change its direction or shape. It is defined as a vector quantity, meaning it has both magnitude and direction. Forces can be either contact forces, like pushing or pulling, or forces at a distance, such as gravity, electricity, or magnetism.

Assuming the arm is straight out from the body and the length of the arm is 30 cm, the force exerted by the biceps muscle would be approximately 20 Newtons.

In this case, the force is equal to the weight of the carton of milk (2.00 kg) multiplied by the acceleration due to gravity (9.8 m/s2). This gives a force of 19.6 Newtons. Multiplying this force by the length of the arm (30 cm) gives a torque of 588 Nm.

Assuming the biceps muscle can generate a maximum torque of 600 Nm, the force it must exert to hold the carton of milk at arm's length would be 19.6 N x (600 Nm / 588 Nm) = 20 N.

To learn more about force

https://brainly.com/question/12970081

#SPJ4

If energy costs 10 cents per kWh, it will cost Rs. 30 to heat a tank of water for 80 minutes using a 3000 W immersion heater.

Hours Used Per Day: Indicate the average number of hours per day that the device is used. If the daily power usage is less than one hour, enter the number as a decimal. (For instance, 30 minutes a day equals 0.5)

Your home's water is heated by a water heater so that you can have hot water for your everyday needs. Modern, more efficient kinds of electric water heaters may only need to operate for two hours every day instead of the standard three hours. Around 4000 watts are typically required for a water heater.

Cost Per Hour: (3000*100*60)/(80*3600)

Cost Per Hour: 30.

To know more about electricity click here: brainly.com/question/776932

#SPJ1

Correct Question:

Calculate the cost of heating a tank of water with a 3000 W immersion heater for 80 minutes if electricity costs 10 cents per kWh.

Answer:

55.8 J

Explanation:

W = Fd = (57.1 N)(0.977 m) = 55.8 J

At interval (0, 2) and (6, 10),  the acceleration will be increasing.

Acceleration is the rate of change of velocity with respect to time.

The acceleration is given by y = 7*sin( x*[tex]\pi[/tex]/4).

to find at which interval the acceleration is increasing,

First, let's study about the sin function:

Sin(θ) increases between -[tex]\pi[/tex]/2 and [tex]\pi[/tex]/2

Sin(θ) decreases between [tex]\pi[/tex]/2 and (3/2)*[tex]\pi[/tex].

Here we have:

θ = x*([tex]\pi[/tex]/2)

When x = 0, θ = 0.

And sin(θ) is increasing in θ = 0.

Then we must choose one of the options that start with x = 0.

now it will stop increasing when:

θ = [tex]\pi[/tex]/2 = x*([tex]\pi[/tex]/4)

x = 2.

So the acceleration is increasing in the segment (0,2)

And it will start increase again when:

θ = (3/2)*[tex]\pi[/tex] = x*([tex]\pi[/tex]/4)

(3/2)*[tex]\pi[/tex]*(4/[tex]\pi[/tex]) = 6 = x.

So at x= 6 the acceleration starts increasing again, and the acceleration is only defined until x = 10,

Therefore

the correct option is: (0, 2) and (6, 10)

To know more about acceleration,

https://brainly.com/question/18390383

#SPJ4

When the number of loops in the coil are decreased then the  magnetic field of that solenoid will also decrease as magnetic field  is directly proportional to the no of loops or current.

An electromagnetic coil is a coil-shaped electrical conductor, such as a wire (spiral or helix). In electrical engineering, magnetic coils are utilized in things like electric motors, generators, inductors, electromagnets, transformers, and sensor coils, where electric currents and magnetic fields interact.

To know more about Solenoid visit

https://brainly.com/question/22043434

#SPJ4

The complete question is:

Set the voltage on the battery to 10V by dragging the slider switch all the way to the right. 4. Now use the control panel to decrease the number of loops in the coil from 4 down to 3, then 2 loops and then 1 loop. What happens to the magnetic field when the number of loops in the coil are decreased?

B I U Score: 0/2 5. Increase the number of loops in the coil to solenoid?

EVs lack an internal combustion engine, also confusingly referred to as BEVs (battery electric vehicles), which transform gasoline into propulsion power.

Instead, they only use the power from one or more sizable batteries to operate. When it comes to EVs, hybrids were the first significant market entrant, especially after the Prius' international launch in the early 2000s. These cars mastered the technique of alternating between an internal combustion engine and an electric motor to increase fuel efficiency. A plug-in hybrid electric vehicle (PHEV) is designed to run on both gas and battery power and is essentially a hybrid of an EV and an HEV. The main distinction is that they are more EV-like because the power is provided via plug-in chargers.

Want to know more about vehicles visit the link which is given below;

https://brainly.com/question/24745369

#SPJ4

The mine shaft has been found to be exactly about 84 m deep.

Let us know that in this case, we have to look at the equation of the motion that is taking place under gravity. This is because, we we can see, the shaft that we have would appear to have been falling freely under the influence of the force of gravity.

We have;

h = ut + 1/2gt^2

h = height

u = initial velocity

g = acceleration due to gravity

t = time taken

Given that u = 0 m/s

h = 1/2gt^2

h = 0.5 * 9.8 * 4.2^2

h = 84 m

Learn more about distance covered:https://brainly.com/question/20330990

#SPJ1

Answer:

Below

Explanation:

Momentum = m * v

80 000 *2   =  4000 *40

160 000     =   160 000          they have the same momentum

The most effective way for an inactive student to become more physically active is to make a schedule and stick to it. This can involve setting aside specific times for exercise each day.

Starting with small goals and gradually increasing the duration and intensity of their physical activity can also be helpful. Including physical activity into their daily routine like taking the stairs instead of the elevator or going for a walk during lunch, can make it easier to fit exercise into their busy schedule.

Physical fitness is important for a number of reasons like improved Health, better mental health, increased energy, improved sleep and better brain functioning.

To know more about health, visit here:

https://brainly.com/question/13179079

#SPJ1

Answer:

Lincoln town car (luxury Ford car)

used commonly for taxi/limos

like around 1995

edmunds