A standard rum and cola will be absorbed faster than a 5-ounce glass of wine because.

After the collision, the two-cart system's total momentum was 0.22 kg m/s in magnitude. The correct answer is A.

To find the magnitude of the total momentum of the two-cart system after the collision, we can use the principle of conservation of momentum. This principle says that the total momentum of a closed system, like the two carts in this case, stays the same unless an outside force changes it.

First, calculate the initial momentum of the first cart:

Then, calculate the initial momentum of the second cart:

After that, we need to calculate the total initial momentum:

Use the principle of conservation of momentum to calculate the final momentum:

So the magnitude of the total momentum of the two-cart system after the collision is 0.22 kg m/s.

This question isn't complete. Here's how it should be written and how answer choices should be given: 

A 0.500-kilogram cart traveling to the right on a horizontal, frictionless surface at 2.20 meters per second collides head on with a 0.800-kilogram cart moving to the left at 1.10 meters per second. What is the magnitude of the total momentum of the two-cart system after the collision?

The correct answer is A.

Learn more about magnitude of the total momentum here: brainly.com/question/11756811

#SPJ4

According to the NEC, a class 1 power limited circuit must be supplied from a source having a rated output of not more than 30 volts and 1000 volt-amperes.

NEC stands for National Electrical Code. It is a part of National Fire Protection Association (NFPA) of united states. NEC provides the standard and code for the safe installation of electrical wiring and equipment.

Class 1 power limited has a device that controls or regulates the current from the power source. This device prevents the overflow of the current in the circuit and thereby also prevents the short circuiting, overload, ground fall, etc.

To know more about power, here

https://brainly.com/question/29575208

#SPJ4

Answer:

Bbbbbbbbbbbbbb. bbbbbbbbbbbbbbb

The properties of water that makes it possible for life to continue to exist in lakes covered by a thick layer of ice for many months of the year are:

The correct option is C.

The water in frozen lakes supports life because of the following properties f water;

As soon as the water turns to ice, the ice loses a lot of its water-like density and continues to float on the lake's surface. Water loses density when it grows colder below 4° Celsius, forcing water that is about to freeze to float to the top.

Learn more about water at: https://brainly.com/question/26846829

#SPJ1

Translation is one of geometry transformation which is used to move a figure in any direction without rotation.

Transformation means changing a structure to increase, decrease or rearrange its elements. Meanwhile, geometry means a branch of mathematics that explains the nature of lines, angles, planes, and space.

Based on these two definitions, geometric transformations can be concluded as changes in the shape of a line, angle, space, and plane.

In everyday life, this geometric transformation is usually used to create works of art and architectural designs.

Translation or shift is a type of geometric transformation where there is a displacement or shift from a point to a certain direction in a straight line plane. As a result, every plane in the straight line will also be shifted in a certain direction and distance.

Translation basically only changes the position, not the shape and size of the field.

A simple example of translation is an event that occurs on a slide. Where the same person with a field changes positions from the starting point (start of the slide) and the ending point (end of the slide). Another example is a vehicle traveling on a straight road, from this incident it can be seen that the vehicle which is an object does not change size but only changes places.

Learn more about translation at https://brainly.com/question/1192610?.

#SPJ4

The steps to achieve a work-life balance, one should manage their time well, establish limits, pay attention to their health, and enjoy their work.

The state of equilibrium where a person equally priorities the responsibilities of their career and their personal life is known as work-life balance. Because both are significant, neither should be ignored. Common causes of a bad work-life balance include the following: expanded obligations at work. putting in more hours.

An ACAS analysis on work-life balance and flexible working shown how a poor balance can cause absences, poor productivity, and stress. Strict regulations, an excessive workload, a hostile work environment, deadline pressure, and a lack of job security are some organisational variables that interfere with work-life balance.

Learn more about work-life balance here:

brainly.com/question/6842966

#SPJ1

Answer:

An eclipse of the sun must occur at a "new" moon - when the moon is between the earth and the sun.

The word penumbra refers to a "partial" eclipse as opposed to umbra which refers to total eclipse.

A partial eclipse must include both terms - "new" and "penumbra"

Answer:

The ratio of the mass of planet Zeb to the mass of Earth must be 8.

Explanation:

The gravitational acceleration on the surface of a planet is determined by the mass of the planet and its radius. The equation is g = GM/r^2, where G is the gravitational constant, M is the mass of the planet, and r is the radius of the planet.

If we assume that the gravitational acceleration on the surface of both planets is the same, we can set the equation for Earth equal to the equation for planet Zeb and solve for the ratio of the mass of planet Zeb to the mass of Earth.

g(earth) = GM(earth)/r(earth)^2 = GM(zeb)/r(zeb)^2

We know that r(zeb) = 2 * r(earth)

so,

GM(earth)/r(earth)^2 = GM(zeb)/(2*r(earth))^2

GM(zeb)/GM(earth) = (2*r(earth))^2 /r(earth)^2

GM(zeb)/GM(earth) = 4*4

GM(zeb)/GM(earth) = 16

So the ratio of the mass of planet Zeb to the mass of Earth is 16/1 = 8

Answer :

after this all u can write this

Alternative energy sources like solar and wind power are always available option A is the correct answer.

In addition to the seven energy sources mentioned above, other alternative energy sources include geothermal energy, wave energy, hydroelectric energy, solar thermal energy, and even space solar energy. Geothermal energy is generated within the earth and is used, unlike wave and hydroelectric energy uses the power of water.

There will never be a shortage or shortage of solar energy because it is one of the cleanest and most plentiful renewable resources. Every person on the planet might theoretically have access to energy for a year with just one hour of sunlight shining on the earth's atmosphere.

To know more about Alternate energy visit

brainly.com/question/3758506

#SPJ4

The given statement “A mechanical wave transmits energy through a vacuum” is false, because mechanical waves cannot move through areas of space where there are no particles because their energy transmission depends on particle contact.

Waves that are classified as mechanical waves require the presence of a medium in order for their energy to be transmitted from one place to another. This makes mechanical waves incapable of transmitting their energy through a vacuum. There are three distinct categories of mechanical waves: transverse waves, longitudinal waves, and surface waves. Mechanical waves have many interesting characteristics, but one of the most noteworthy is their measurement, which is given by displacement divided by wavelength.

To learn more about mechanical waves, click here:

https://brainly.com/question/24459019

#SPJ4

Answer: Cosmology

Explanation:

The answers include the following below:

This is referred to as the propagation of disturbances from place to place in a regular and organized way and there are different types of waves.

An example is the longitudinal wave which has the vibration of the particles takes place in the same direction as that of the wave.

Read more about Wave here https://brainly.com/question/25699025

#SPJ1

When going up a hill, the type of energy which a bicycle has is potential energy.

A potential energy is a stored energy which depends upon the relative position of various parts of a system. When it is compressed or stretched, a spring has more potential energy. Any object which is lifted from its resting position has stored energy because it has a potential to do work when released.

When going up a hill, a bicycle has potential energy. As we climb to get up the hill, we gain potential energy.

Potential energy is the stored energy in any object by virtue of its position or arrangement of parts. However, it is not affected by the environment outside of the object, such as air or height. On the other side, kinetic energy is the energy of an object's particles in motion.

Learn more about potential energy at: https://brainly.com/question/24284560

#SPJ4

If something being dropped has a mass of 0.4 kg, and the height from the floor to the top is 15 m then 20J would be the change in PE.

The force acting on the two objects affects the potential energy formula. The formula for gravitational force is P.E. = mgh, where g is the acceleration caused by gravity (9.8 m/s2 at the earth's surface) and h is the height in meters.

Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is compressed or stretched, its potential energy increases. If a steel ball is raised above the ground as opposed to falling to the ground, it has more potential energy.

Given :        

Mass of the object  M=0.4 kg

Height up to which it is raised  h=5 m

Potential energy P.E=Mgh

g = 10 m/s^2

P.E= 0.4×10×5=20J

To know more about potential energy visit:

https://brainly.com/question/14427111

#SPJ1

20J would be the change in PE for a drop with a mass of 0.4 kg and a height of 15 m from the ground to the top.

The potential energy formula is impacted by the force operating on the two objects.

P.E. = mgh, where g is the acceleration brought on by gravity, h is the height in metres, is the formula for gravitational force.

Potential energy is a type of stored energy that depends on how various system elements interact with one another. A spring's potential energy rises when it is crushed or stretched. A steel ball has higher potential energy if it is lifted above the ground as opposed to falling to the ground.

Given:

M=0.4 kg, the object's mass

It is raised to a height of h=5 m.

Powerful potential P.E=Mgh

g = 10 m/s^2

P.E= 0.4×10×5=20J.

To know more about potential energy, visit:

https://brainly.com/question/14427111

#SPZ1

Conclusion statement defines the answer of a scientific problem based on the result of the experiment.

A scientific problem is solved by the scientific methods. A scientific method is the step-by-step approach to a conclusion of the problem. It may include the following steps.

Observation: It is the first step of the method. It is based on that how do you see the problem.

Hypothesis: It is the result you think that you will get.

Prediction: It is based on your scientific knowledge. If our hypothesis is correct than our prediction will also be true.

Experiment: It is the system or mechanism designed by you to test your hypothesis.

Conclusion: It is the final result based on the experiment of the method. This statement tells you whether your hypothesis is true or not.

To know more about Conclusion, here

https://brainly.com/question/78686  

#SPJ4

They are attractive forces between two permanent dipoles, or two induced dipoles.

A dipole is a type of electrical charge consisting of two equal and oppositely charged poles, or points of charge. The two poles are usually represented by a positive and negative sign. Dipoles are commonly found in molecules, atoms, and other types of particles, and are responsible for many of the physical and chemical interactions we observe in nature. Dipoles can also be created artificially with electrical equipment, such as in the case of an electric dipole antenna, which is used to transmit or receive radio signals. In a dipole, the two charges attract each other, which creates a field of force between them. The strength of this field depends on the distance between the two charges. Dipoles also exist in a magnetic form, in which the two poles have opposite magnetic poles and create a magnetic field.

This type of intermolecular force is a type of Van der Waals force and is much stronger than the London dispersion forces. They are responsible for most of the physical properties of polar substances, such as boiling points, melting points, and solubility.

To learn more about dipoles
https://brainly.com/question/14553213
#SPJ4

Pyramid collision, recommendations are made specifically for each person depending on their age, gender, and amount of physical activity. The consumption of cereals,  milk, veggies, fruit, and oils are the main.

A health impact pyramid: what is it?

The Health Benefit Pyramid is a diagram that shows the many levels of impact that can come from interventions in public health. Attempts to deal with the social determinants that potentially affect your health are at the bottom of the pyramid, suggesting interventions with the highest potential impact. Housing, financial stability, public safety, jobs, education, and the environment are a few examples of these. The broader determinants of health are these.

What are the four primary categories of factors that affect health?

Numerous variables affect health, including These circumstances are referred to as social determinants, which are the socioeconomic factors that influence life expectancy and quality of life and support health. Examples of these factors include accommodation, education, access to food, and transportation. Too frequently, people lack control over their ability to access these resources that influence their health.

To know more about collision visit :

brainly.com/question/4322828

#SPJ1

A balloon absorbs electrons from a wool fabric when it is rubbed against it, leaving the balloon with a negative charge and the wool with a positive charge.

Electrons from the atoms and molecules in your hair migrate to the balloon when you brush it against your head. The balloon acquires a negative charge thanks to the negative charge of electrons, but your hair retains a positive charge.

Electrons migrate from the hair or wool to the balloon when the balloon is rubbed against it. The balloon picks up a net negative charge because electrons have a negative charge. The can rolls because the positive charges in the can are drawn to the negative charges in the balloon.

learn more about static electricity refer

https://brainly.com/question/18562731

#SPJ1

Answer:

250 Newtons

Explanation:

To find the net force acting on the car, we can use the equation:

F = ma

Where F is the net force, m is the mass of the car and a is the acceleration.

We know that the mass of the car is 100 kg and the acceleration is (10m/s - 5m/s) / 2 seconds = 2.5 m/s²

So, the net force acting on the car is:

F = (100 kg) x (2.5 m/s²) = 250 N

Therefore, the net force acting on the car is 250 N

The image is inverted, the lens is converging, the image is enlarged in size, the focal length of the lens with the greater index of refraction(lens 1) will be smaller than that of the other lens(lens 2).

A real image is that which can be obtained on the screen whereas a virtual image cannot be. A concave lens always produces virtual image whereas a convex lens can produce both real and virtual image. So the lens is convex lens which is also called converging lens. A converging lens always produces enlarged or the same size image but never produce smaller image. So the image will be enlarged in size.

The refractive index of a glass is the measure of light bending ability of it. Greater the refractive index more will be the bending of a light ray. So, if two convex lenses identical in size and shape are manufactured from glass with two different indices of refraction, the focal length of the lens with greater refractive index would be smaller.

To know more about focal length, here

https://brainly.com/question/29870264

#SPJ4

According to the question, the answer of the given convert will be: 1.5 days = 36 hours, 5.2 ft = 1.58 m, 3600 s = 1 hr,10.2 m = 33.46 ft, 305 g = 0.305 kg, 180 pm = 0.18 m, 73 kg = 73000 g, 1,366 s = 22.77 min, 86,000 m = 86 km.

What is convert?

Convert is a term used to describe the process of changing one type of data into another. This could include changing a file format, changing a text document into a spreadsheet, or converting a physical document into a digital file. It is a useful tool in many industries and is often used to make sure that data is stored in a standard format, making it easy to access and use. Convert is used in a variety of settings, including media, accounting, and business. It is also used to help ensure data security and accuracy.

To learn more about convert visit:

brainly.com/question/29217523

#SPJ1

When the object reaches the terminal velocity the object stops accelerating. Option B

The greater the objects surface area, the more air resistance it encounters. Option A

Terminal velocity is the maximum velocity an object reaches when falling through a fluid, such as air, due to the balance of gravitational force and fluid drag.

Surface area affects terminal velocity because a larger surface area results in greater fluid drag force, which slows the object's descent. A smaller surface area results in less fluid drag and a higher terminal velocity.

Learn more about terminal velocity:https://brainly.com/question/2654450

#SPJ1

The BEST description of the effect that her body distortion is having is (C) depression.

Depression is a mental health disorder characterized by a persistent feeling of sadness, hopelessness, and loss of interest in activities. People with depression may experience changes in sleep, appetite, energy level, and concentration. Additionally, they may experience feelings of guilt, worthlessness, and helplessness. Symptoms of depression can range from mild to severe and can include physical symptoms such as fatigue, headaches, and stomachaches. Psychotherapy, medication, and dietary changes were available treatments for depression. With the right support and treatment, individuals can lead a healthy and fulfilling life.

To learn more about depression
https://brainly.com/question/10045613
#SPJ1

The outer diameter of a hollow steel tube when the stress is limited to 120 MN/m² is  119.35 mm

Axial stress refers to the stress induced in a loaded member along the longitudinal or axial member direction. Calculated mathematically from the ratio of the axial or longitudinal force to the cross-sectional area of ​​the member.

Using the expressions for the axial stress and rated load, the cross-sectional area of ​​the tube can be determined. Substituting the values ​​for the cross-sectional area of ​​the tube and the inside diameter of the tube in the expression for the cross-sectional area of ​​a hollow cylinder yields the outside diameter of the tube.

                                σ = F/A

The formula for calculating the cross-sectional area of ​​a hollow cylinder.

A = π/4(D² – d²)

Here, the inside and outside diameters of a hollow cylinder are d and D.

Step 1

Determine the cross-sectional area of ​​tube (A) using the axial stress expression:

σ = F/A

Here, the axial stress limit is σ = 120 MN/m2 and the tensile load is F = 400 kN

σ = F/A

120 x 10³KN/1 MN = 400 kN/A

A = (400 kN) ÷ (120 x 10³ kN/m²)

A = 3333.33 mm²

Substitute the values ​​for the cross-sectional area of ​​the cylinder and the inside diameter of the cylinder in the equation for the cross-sectional area of ​​the hollow cylinder to calculate the outside diameter of the cylinder.

A = 3333.33 mm²

d = 100 mm

A = π/4(D² – d²)

3333.33 mm² = π/4(D² – 100²)

D² =[tex]\sqrt{ 14244.128}[/tex]

D = 119.35 mm

So, the outside diameter of the hollow is 119.35 mm.

Complete the questions is:

A hollow steel tube with an inside diameter of 100 millimeters must carry a tensile load of 400 kN. What is the outside diameter of the tube if the stress is limited to 120 MN/m²?

Learn more about the axial stress at https://brainly.com/question/7013119

#SPJ4

Force and weight are related in that weight is a type of force. Specifically, weight is the force exerted on an object due to gravity. It is measured in units of force, such as newtons (N) or pounds (lb).

Weight is a scalar quantity, which means it has magnitude but no direction. It is determined by the mass of an object and the acceleration due to gravity.

The formula for weight is:

Weight = mass x gravity (W=mg)

On the other hand, Force is a vector quantity, which means it has both magnitude and direction. Force can be described as the push or pull on an object. It can be due to a variety of causes, such as friction, tension, or pressure. It is also measured in units of force, such as newtons (N) or pounds (lb).

So, to relate force and weight, weight is a force that acts on an object due to gravity, whereas force can be any kind of push or pull on an object, and weight is one of them.

To conclude, weight is a force that is exerted on an object due to gravity, while force is a more general term that can refer to any type of push or pull on an object. The key difference between the two is that weight is a scalar quantity while force is a vector quantity.

Hope This Helps You!

Answer:

a: True centrifuge works on centripetal force.

b: False separating funnel can't be used to separate blood cells from samples.

e: False separating funnel cannot separate milk and water.

f: Condenser receives high pressure gas from the compressor and convert this gas to a liquid.

The number of revolutions  of the tire during the motion is 10 revolutions.

The number of revolutions  of the tire during the motion is calculated from the distance travelled by the tire.

The total distance travelled by the tire during the motion is calculated as follows;

s = t ( u + v ) / 2

where;

s = 3.7 x ( 13.9 + 0 ) / 2

s = 25.72 m

The number of revolutions of the tire is calculated as follows;

N ( 2πr ) = 25.71

where;

N = ( 25.71 ) / ( 2π x 0.4255 )

N = 9.6 ≈ 10 rev

Learn more about number of revolutions here: https://brainly.com/question/20700248

#SPJ1

When reggie stepped up to the plate and hit a 0. 150-kg fast ball traveling at 36. 0 m/s, the impact caused the ball to leave his bat with a velocity of 45. 0 m/s in the opposite direction. If the impact lasted for 0. 002 s, the force did reggie exert on the baseball is 6075 N.

The force can be calculate as follows:

assuming that the ultimate direction of motion is positive and the starting direction of motion before to impact is negative.

m = 0.15 kg, or the mass of the ball being struck

v0 is the ball's pre-impact initial velocity and is equal to 36 m/s.

45 m/s is the ball's final speed after impact, or v.

Time of Impact: 0.0020 seconds

Reggie's force on the ball was F.

Incorporating impulse-change into the momentum equation

F t = m (v - v₀)

F (0.0020) = (0.15) (45 - (- 36))

F = 6075 N

Learn more about force at https://brainly.com/question/13976717

#SPJ4