The translational speed of the cylinder when it leaves the incline is 3.28 m/s.
To solve this problem, we need to use the conservation of energy principle, which states that the initial potential energy of the cylinder is equal to its final kinetic energy plus any remaining potential energy.
The initial potential energy of the cylinder is given by:
U_i = mgh
where m is the mass of the cylinder, g is the acceleration due to gravity, and h is the height of the incline. Substituting the given values, we get:
U_i = (2.53 kg)(9.81 m/s^2)(2.70 m) = 68.9 J
The final kinetic energy of the cylinder is given by:
K_f = (1/2)mv^2
where v is the translational speed of the cylinder when it leaves the incline. We also know that the cylinder will have rotational kinetic energy due to its rolling motion, given by:
K_rot = (1/2)Iω^2
where I is the moment of inertia of the cylinder and ω is its angular velocity. For a solid cylinder rolling without slipping, the moment of inertia is given by:
I = (1/2)mr^2
and the angular velocity is related to the translational speed by:
ω = v/r
Substituting these equations and simplifying, we get:
K_f + K_rot = (1/2)mv^2 + (1/4)mv^2
K_f + K_rot = (3/4)mv^2
Now, let's calculate the final potential energy of the cylinder. At the bottom of the incline, the cylinder will have a height of zero, so its potential energy will be:
U_f = mgh_cos(θ)
where θ is the angle of the incline. Substituting the given values, we get:
U_f = (2.53 kg)(9.81 m/s^2)(2.70 m)cos(46.8°) = 29.3 J
Using the conservation of energy principle, we can equate the initial potential energy to the final kinetic energy plus the final potential energy:
U_i = K_f + K_rot + U_f
Substituting the equations we derived earlier and simplifying, we get:
68.9 J = (3/4)mv^2 + 29.3 J
Solving for v, we get:
v = sqrt[(4/3)(68.9 J - 29.3 J)/m] = 3.28 m/s
Learn more about translational speed here
brainly.com/question/15443379
#SPJ4
At absolute zero temperature, how is the pressure that the fluid exerts on its system container?
At absolute zero temperature, the pressure that a fluid exerts on its container is determined by its quantum mechanical nature, rather than by thermal motion.
What happens at absolute zero temperature?
At absolute zero, the fluid would have no thermal motion, and all the particles would be in their lowest energy state. This means that the fluid would still exert pressure on its container, but it would be a residual pressure, determined by the quantum mechanical properties of the fluid.
In some cases, the residual pressure at absolute zero can be significant and can be calculated using the ideal gas law and quantum statistical mechanics. In general, residual pressure is a fundamental property of a fluid, and is related to its intermolecular forces and density.
However, it is important to note that it is not possible to reach absolute zero temperature in practice, due to the laws of thermodynamics and the limitations of current technology. Nevertheless, the residual pressure at absolute zero can still be studied theoretically and provides important insights into the behavior of fluids at very low temperatures.
To know more about absolute zero temperature, Check out:
https://brainly.com/question/3795971
#SPJ4
.
Which of the following questions would be MOST helpful in gathering information about the uses of selective breeding?
Nowadays, breeders work to produce animals and plants with desirable phenotypic qualities, such as high crop yields, disease resistance, quick growth, and many other phenotypic traits. Option C is right as a result.
What purpose does selective breeding serve?Selective breeding is used. a process for creating an organism from parents who already have the required characteristics. a natural method of breeding offspring with desired traits.
Breeders today strive to create animals with desired phenotypic characteristics, such as high crop yields, disease resistance, rapid growth, and many other phenotypic traits.
Thus, the correct option is C.
For more details regarding selective breeding, visit:
https://brainly.com/question/461245
#SPJ9
Your question seems incomplete, the probable complete question is:
Which of the following questions would be most helpful in gathering information about selective breeding?
A. What traits in a chicken would be beneficial for humans?
OB. How long does it take for dogs to reproduce and birth puppies?
O C. How do wild cactus plants reproduce in the desert?
D. Why do peaches only grow in the summer?
As a wave moved from one medium to another there was a change in the wave’s speed. If the frequency of the wave does not change, what property of the wave must change, causing the change in speed?
Answer:
V = f λ expresses wave speed where f is frequency and λ wavelength
If the frequency is unchanged across the boundary then the wavelength must change to account for the change in speed.
A fully charged capacitor initially has an air gap and is disconnected from the battery. A dielectric material is inserted between the plates What happen to the free charge at surface of the capacitor plates and the total charge free and bound at the surface of the capacitor plates?
When a dielectric material is inserted between the plates of a capacitor, the free charge on the surface of the capacitor plates will be reduced. This is because some of the free charge is transferred to the dielectric material.
What is the charge ?The charge is the amount of money that someone is required to pay for a product or service. It is the cost that someone agrees to pay in exchange for goods or services. This charge can be either a fixed amount or a percentage of the total purchase amount. Charges can also include fees such as taxes, late fees, processing fees, and handling fees. Charges can be paid in cash, by credit card, or by check.
To learn more about charge
https://brainly.com/question/25922783
#SPJ4
How do you find the atomic radius on the periodic table?
The atomic radius on the periodic table generally increases from top to bottom within a group and decreases from left to right across a period.
The atomic radius refers to the distance between the nucleus of an atom and its valence electrons. It is measured in picometers (pm) or angstroms (Å). On the periodic table, elements are arranged in periods (horizontal rows) and groups (vertical columns).
Within a group, the atomic radius generally increases as you move down because the number of electron shells increases, resulting in a larger atomic radius.
To know more about the periodic table, here
brainly.com/question/11155928
#SPJ4
A toy car rolls along a flat, level floor for ten seconds traveling 25m. What is the average speed of the car? A toy car rolls along a flat, level floor for ten seconds traveling 25m. What is the average speed of the car?
The average speed of the car can be calculated by dividing the distance traveled by the time taken.
Average speed = distance/time
In this case, the distance traveled is 25m and the time taken is 10 seconds.
So,
Average speed = 25m/10s = 2.5 m/s
Therefore, the average speed of the car is 2.5 m/s.
True/False?each different signal in a 1h nmr spectrum represents a different of hydrogen atom. hydrogen atoms that are give the same signal.
The statement (each different signal in a 1H NMR spectrum represents a different hydrogen atom. hydrogen atoms that give the same signal) is false because each different signal in a 1H NMR spectrum represents a different set of hydrogen atoms, not necessarily a single hydrogen atom.
Hydrogen atoms that are chemically equivalent, such as those in the same functional group or environment, give the same signal.
In addition to its use in identification, nuclear magnetic resonance (NMR) spectroscopy can provide in-depth knowledge about the structure, dynamics, reaction state, and chemical environment of molecules. Proton and carbon-13 NMR spectroscopy are the most popular forms of nuclear magnetic resonance (NMR), however, this technique can be applied to any kind of sample that has nuclei that have spin.
Want to know more about the NMR spectrum visit the link which is given below;
https://brainly.com/question/29775399
#SPJ4
A goldfish is swimming at 2. 40 cm/s toward the front wall of a rectangular aquarium. What is the apparent speed (in cm/s) of the fish measured by an observer looking in from outside the front wall of the tank?.
The apparent speed of the fish measured by an observer looking in from outside the front wall of the tank is 1.50cm/s
For the plane surface (R=∞
n1/p + n2/q = n2 −n1/R
becomes q=−n2/n1 p
Thus the magnitudes of rate of change in the image and object positions are related by
dq/dt = n2/n1 dp/dt
if the fish swims towards the wall with a speed of 2 cm/s, the speed of the image is given by
v= dq/dt
= 1 (2)/ 1.3 =1.50cm/s
What is speed?
Distance divided by time is the dimension of speed. The metre per second (m/s) is the SI unit of speed, although the kilometre per hour (km/h) or, in the US and UK, miles per hour, is the most widely used measure in daily life (mph). The knot is a popular choice for air and sea travel.To know more about speed, click the link given below:
https://brainly.com/question/28224010
#SPJ4
why is it necessary that a force probe be calibratedA.because there is a slight variance between sensors, this improves repeatability and helps neutralize driftB.because velocity would be changing and acceleration would be constant, which means force is constantC.because, for example, if you are adding 2 forces together with the same direction and magnitude, they will double, just like when adding vectorsD.To make sure that the motion detector only catches the motion of the ball and not the motion of the experimenter's hand
A option is correct. Calibrating a force probe is necessary because there can be a slight variance between sensors of the same make and model.
Calibrating a force probe is necessary because there can be a slight variance between sensors of the same make and model, which can result in inaccurate or inconsistent measurements. Calibration helps to identify and correct for these variations, which improves the accuracy and repeatability of the measurements. Additionally, over time, factors such as temperature and wear and tear can cause the readings of a force probe to drift or change slightly. Calibrating the probe periodically can help to detect and correct for these changes, ensuring that the probe continues to provide accurate readings.
To make sure that a motion detector only catches the motion of a ball and not the motion of an experimenter's hand, it is important to minimize any movement or vibration of the hand or the experimental setup. This can be achieved by using a tripod or other stable support for the motion detector, and by positioning the detector in a way that is focused only on the area where the ball is expected to move. In addition, it may be helpful to use software or filters to carefully analyze the data collected by the motion detector to ensure that any extraneous movement or noise is filtered out, leaving only the relevant data. By taking these steps, the motion detector can accurately capture the motion of the ball without being affected by the motion of the experimenter's hand.
Learn more about force probe here:
https://brainly.com/question/15383935
#SPJ4
what is drop in mililiter?
20 drops per millilitre. Example: To convert 15 drops to millilitres, multiply by 0.05 to get 0.75 mL.
A drop is a unit of volume commonly used in medicine and cooking. The volume of a single drop can vary depending on factors such as the size of the dropper or the liquid being measured, but a commonly accepted standard is that one drop is equal to approximately 0.05 milliliters (mL).
It's important to note that relying on drops as a precise measurement can be problematic, as variations in dropper size, liquid viscosity, and other factors can cause significant variations in the actual volume of a drop. For this reason, it's often more accurate to use graduated measuring devices like syringes or graduated cylinders when precise measurements are required.
To learn more about millilitres :
https://brainly.com/question/27817177
#SPJ4
What is the minimum coefficient of friction needed between your back and the barrel wall ride (room spins, floor drops away) if the diameter of the circle is 2.8 m and it makes 1 revolution every 1.9 seconds?
The minimum friction coefficient needed can be calculated by dividing the calculated centripetal force by your weight.
What is friction coefficient?To determine the minimum coefficient of friction needed between your back and the barrel wall for the ride, we need to calculate the centripetal force required to keep you in place and make sure that the friction force is greater than or equal to this force.
The centripetal force can be calculated using the formula:
F = m * v^2 / r
where:
m is your mass,
v is your speed (calculated as the circumference of the circle divided by the time for one revolution), and
r is the radius of the circle (which is half of the diameter, or 1.4 meters).
Using this formula, we can calculate the centripetal force required as follows:
v = (2 * pi * r) / t = (2 * pi * 1.4) / 1.9 = 4.27 m/s
F = m * v^2 / r = m * 4.27^2 / 1.4
Note: "pi" is a mathematical constant approximately equal to 3.14.
Now that we have the centripetal force, we can calculate the minimum friction force needed to keep you in place by using the formula:
F_friction = friction_coefficient * N
where:
friction_coefficient is the minimum coefficient of friction needed,
N is the normal force, which is equal to your weight in this case.
To find the minimum friction coefficient, we can set the centripetal force equal to the friction force:
F = friction_coefficient * N
friction_coefficient = F / N
So the minimum friction coefficient needed can be calculated by dividing the calculated centripetal force by your weight.
This is a rough estimate, as it assumes that you are stationary at the start of the ride, and it does not take into account any other forces that may affect your motion, such as air resistance or changes in the angle of the floor. In practice, a higher coefficient of friction may be necessary to ensure a safe and comfortable experience for the rider.
To know more about coefficient of friction , visit:
https://brainly.com/question/14121363
#SPJ4
The minimum friction coefficient needed can be calculated by dividing the calculated centripetal force by your weight.
What is friction coefficient?To determine the minimum coefficient of friction needed between your back and the barrel wall for the ride, we need to calculate the centripetal force required to keep you in place and make sure that the friction force is greater than or equal to this force.
The centripetal force can be calculated using the formula:
[tex]F = m * v^2 / r[/tex]
where:
m is your mass,
v is your speed (calculated as the circumference of the circle divided by the time for one revolution), and
r is the radius of the circle (which is half of the diameter, or 1.4 meters).
Using this formula, we can calculate the centripetal force required as follows:
[tex]v = (2 * pi * r) / t = (2 * pi * 1.4) / 1.9 = 4.27 m/s[/tex]
[tex]F = m * v^2 / r = m * 4.27^2 / 1.4[/tex]
Note: "pi" is a mathematical constant approximately equal to 3.14.
Now that we have the centripetal force, we can calculate the minimum friction force needed to keep you in place by using the formula:
[tex]F_friction = friction_coefficient * N[/tex]
where:
friction_coefficient is the minimum coefficient of friction needed,
N is the normal force, which is equal to your weight in this case.To find the minimum friction coefficient, we can set the centripetal force equal to the friction force:
[tex]F = friction_coefficient * N[/tex]
[tex]friction_coefficient = F / N[/tex]
So the minimum friction coefficient needed can be calculated by dividing the calculated centripetal force by your weight.
This is a rough estimate, as it assumes that you are stationary at the start of the ride, and it does not take into account any other forces that may affect your motion, such as air resistance or changes in the angle of the floor. In practice, a higher coefficient of friction may be necessary to ensure a safe and comfortable experience for the rider.
To know more about coefficient of friction , visit:
brainly.com/question/14121363
#SPJ4
Calculate the Kinetic energy of a truck that has a mass of 2900 kg and is moving at 55 m/s.
The kinetic energy of the truck is 44,287,500 J as per the given data.
What is kinetic energy?The energy an object has as a result of motion is known as kinetic energy. A force must be applied to an object in order to accelerate it.
The kinetic energy (K) of an object can be calculated using the formula:
[tex]K = 0.5 Xm X v^2[/tex]
Where,
m = mass of the object
v = velocity
Plugging in the values given in the question, we have:
[tex]K = 0.5 X 2900 X (55 m/s)^2[/tex]
[tex]K = 0.5 X 2900 X 3025 m^2/s^2[/tex]
K = 44,287,500 J (joules)
So, the kinetic energy of the truck is 44,287,500 J.
For more details regarding kinetic energy, visit:
https://brainly.com/question/26472013
#SPJ9
Which of these is not a difference between the gravitational force and the Coulomb force?
a.the strengths of the forces are the same
b.both forces are always attractive
c.the force decreases by the factor 1/r2 as distance increases
d.both forces fields are measured in same units
Both the gravitational influence and indeed the Coulomb force are always attracting, hence there is no distinction between them(option b).
Describe force.A clear meaning is associated to the word "force." The terms "pressure" and "pull" are totally acceptable at this degree to describe dynamics. An object does not have a force inside of it or within it. Another object applies a force to the first. Both living things and non-living things can be considered to be parts of a force.
Is strength equivalent to force?As a result of their seeming comparable definitions, force and power are frequently employed interchangeably. They are not equivalent, nevertheless, in physics. A two things interacting produces force as its primary byproduct.
To know more about Force visit:
https://brainly.com/question/13191643
#SPJ1
what happens to the temperature of the gas during an isobaric expansion?
The temperature of the gas remains constant during an isobaric expansion.
What is the temperature ?The temperature is a measure of the degree of hotness or coldness of an object or an environment. Temperature is usually measured in units of degrees Celsius (°C), Fahrenheit (°F) or Kelvin (K). Generally, temperatures range from low negative values to extremely high positive values. The average temperature on Earth is about 15°C (59°F).
To learn more about temperature
https://brainly.com/question/27944554
#SPJ4
For an isobaric process to occur the temperature of the gas must rise as the volume of gas increases. Since temperature and volume change there is work and internal energy change involved.
Heat enters the system when an isobaric expansion process occurs. The mechanism uses some of the heat to operate on the surroundings, while the remaining heat is used to boost internal energy.
The volume of the gas expands during an expansion process, raising the temperature along with it.
What is the temperature ?The temperature is a measure of the degree of hotness or coldness of an object or an environment. Temperature is usually measured in units of degrees Celsius (°C), Fahrenheit (°F) or Kelvin (K). Generally, temperatures range from low negative values to extremely high positive values. The average temperature on Earth is about 15°C (59°F).
To learn more about temperature
brainly.com/question/27944554
#SPJ4
Two blocks connected by a cord passing over a small, frictionless pulley rest on frictionless planes. (a) Which way will the system move when the blocks are released from rest? (b) What is the acceleration of the blocks? (c) What is the tension in the cord?
(a) System will move downward. (b) Acceleration is 1.96 m/s^2. (c) Tension in cord is 66.8 N.
(a) The block with the larger mass will move downward, and the block with the smaller mass will move upward. So the net force on the system is downward.
(b) The acceleration of the blocks is,
[tex]a = \dfrac{(m_2 - m_1)g}{(m1 + m2)}[/tex]
where m₁ and m₂ are the masses of the blocks and g is the acceleration due to gravity.
m₁ = 4 kg and m₂ = 6 kg
The acceleration is,
[tex]a = \dfrac{(6 - 4)(9.8)}{(4 + 6)}\\ = 1.96 m/s^2.[/tex]
(c) The tension in the cord,
[tex]T = m_2a + m_2g,[/tex]
where m2 is the mass of the block that is moving downward, a is the acceleration of the blocks, and g is the acceleration due to gravity.
[tex]T = (6)(1.96) + (6)(9.8)\\ = 66.8 N.[/tex]
Therefore, the tension in the cord is 66.8 N.
To know more about the tension, here
brainly.com/question/29124835
#SPJ4
What is the time it takes to cause 40 watts of power with 7 J of work being done?
(Show work please)
The time taken to cause 40 watts of power with 7 J of work being done will be 0.175 seconds.
What is power?Power is defined as the work done by the body per second. In other words, power is the rate of doing work. The amount of energy transferred or converted per unit of time is referred to as power.
The watt is the unit of power in the International System of Units, equal to one joule per second. Power is sometimes referred to as activity in older works. A scalar quantity is a power.
Given that the power is 40 watts and the work is 7 J. The time will be calculated as:-
Power = Work / Time
40 = 7 / Time
Time = 7 / 40
Time = 0.175 seconds
Therefore, the time will be 0.175 seconds.
To know more about power follow
https://brainly.com/question/25864308
#SPJ1
A regulation basketball has a 46 cm diameter and may be approximated as a thin spherical shell. How long will it take a basketball starting from rest to roll without slipping 4.4m down an incline that makes an angle of 15.4° with the horizontal?
The acceleration of gravity is 9.81m/s^2? Answer in units of s
Answer: 2.2 seconds!
Explanation:
The answer is approximately 2.2 seconds.
To find this, we can apply the equations of motion for a rolling sphere on an incline. Since the ball is starting from rest, its initial velocity is 0 m/s. We also know the angle of inclination (15.4°) and the distance the ball must travel (4.4m).
Using the equations of motion, we can solve for the acceleration of the ball, which is given by:
a = g*sin(θ)
where g is the acceleration due to gravity (9.81 m/s2) and θ is the angle of inclination (15.4°).
So, the acceleration of the ball is:
a = 9.81 * sin(15.4°) = 3.15 m/s2
Now we can use the equations of motion to solve for the time it will take for the ball to travel the 4.4m.
The equation for displacement is given by:
x = 1/2 * a * t^2
Where x is the displacement (4.4m in this case), a is the acceleration (3.15 m/s2) and t is the time.
Rearranging the equation to solve for t, we get:
t = sqrt(2x/a)
Substituting in the values for x and a, we get:
t = sqrt(2*4.4/3.15) = 2.2 s
Therefore, it will take the basketball approximately 2.2 seconds to roll 4.4m down the incline.
A 75.0 kg person stands on a analog scale in an elevator that accelerates upwards from rest to 30.0 m/s in 2.00 seconds.
A.) Calculate the scale reading in Newtons (The scale exerts an upward force on him equal to its reading.)
B.) Calculate the scale reading compared with his weight.
C.) What is UNREASONABLE about this? (CHOOSE ONE)
-The time of 2 seconds is unreasonable.
-The final speed is too small for an elevator.
-It is unreasonable that an elevator carries a 75 kg person.
-There is nothing unreasonable.
-The acceleration is much higher than any standard elevator.
A. scale reading in Newtons is 2250 N
B. scale reading compared with his weight is 735.8 N
C. The final speed is too small for an elevator is unreasonable.
The given data is as follows:
Weight of person = 75kg
Acceleration = 30.0 m/s
Time period = 2.00 seconds
a. The scale reading in Newtons is calculated by using
F(net) = mass*acceleration
F(net) = 75kg * 30.0 m/s
F(net) = 2250 N
b. scale reading compared with his weight is calculated by using
Force(gravity) = m*g
Let's assume that g is the acceleration due to gravity - 9.8m/s^2
Force(gravity) = 75.0 * 9.81 m/s^2 = 735.8 N
The scale reading compared with the person's weight calculated by,
person's weight = 2250 N / 735.8 N = 3.06
C. UNREASONABLE option is:
The final speed is too small for an elevator. This is because elevators can get different speeds relying on their structure and purpose.
To learn more about scale reading
https://brainly.com/question/14960102
#SPJ4
Which of the following statements about speed and velocity is correct?Velocity only describes an object’s rate of motion.Speed describes how an object is changing its velocity.Speed and velocity both describe how an object is speeding up.Only velocity includes the direction an object is traveling.
Answer:
Velocity includes direction.
Explanation:
Velocity is a vector, so it has direction and magnitude.
The electric potential energy of a system of two point charges is proportional to? (1 Point)
A. The distance between the two charges.
B. The square of the distance between the two charges.
C. The inverse of the distance between the two charges.
D. The inverse of the distance between the two charges.
E. The inverse of the square of the distance between the two charges.
The electric potential energy of a system of two point charges is inversely proportional of the distance between the two charges.
Electric potential energy is a implicit energy( measured in joules) that results from conservative Coulomb forces and is associated with the configuration of a particular set of point charges within a defined system. An object may be said to have electric implicit energy by virtue of either its own electric charge or its relative position to other electrically charged objects.
The term" electric implicit energy" is used to describe the implicit energy in systems with time- variant electric fields, while the term" electrostatic implicit energy" is used to describe the implicit energy in systems with time- steady electric fields.
Learn more about electric potential energy from brainly, visit: brainly.com/question/12645463
#SPJ4
What is the Darcy Weisbach formula?
The Darcy-Weisbach formula is an equation used to calculate the frictional losses, or pressure drop, in a fluid flowing through a pipe or other conduit. It is widely used in fluid mechanics and engineering.
The formula is:
ΔP = f (L/D) (ρ V^2 / 2)
The Darcy-Weisbach formula is an equation that is used to calculate the frictional pressure drop or head loss in a fluid flowing through a pipe or duct. It was developed by Henry Darcy and Julius Weisbach in the mid-19th century and is still widely used today.
The Darcy-Weisbach formula is based on the concept of the Reynolds number, which is a dimensionless quantity that characterizes the flow regime. For laminar flow, the formula reduces to the Hagen-Poiseuille equation, while for turbulent flow, it includes a friction factor that depends on the Reynolds number and the relative roughness of the pipe or duct. It takes into account the fluid properties, such as viscosity and density, as well as the roughness of the pipe or duct walls.
To learn more about Darcy-Weisbach formula visit here:
brainly.com/question/17361860
#SPJ4
The table below provides data obtained at different geographical locations on Earth.
In which city would Earth’s gravitational field strength be the largest?
The city of Charleston, WV will have the largest gravitational field strength.
What is gravitational field strength?The space around a material object in which its gravitational force can be experienced is known as gravitational field.
The gravitational field strength at a point in this field is the force experienced on unit mass placed at that point.
Here,
The data obtained at different geographical locations of earth are given in the table. The latitude of the geographical areas are provided.
Gravitational field strength, I = -GM/r²
i.e, it follows the inverse square law.
The variation of gravitational field strength with change in latitude has been studied and the studies proved that:
As an object moves away from the surface of earth, the gravitational force between the object and earth decreases and therefore the gravitational field strength also decreases.
Therefore considering the latitudes of the geographical places mentioned, the place at the lowest latitude will have the strongest gravitational field strength. Charleston, WV will have largest gravitational field strength.
Hence, Charleston, WV which is at the lowest latitude will have the strongest gravitational field strength.
To learn more about Gravitational field strength, click:
https://brainly.com/question/29198014
#SPJ1
calculate the magnitude of the force, in newtons, the jumper must exert on the ground to produce an upward acceleration 4.00 times the acceleration due to gravity.
All things in a gravitational field, like the surface of the Earth, undergo a constant acceleration that is known as the acceleration due to gravity.
What is acceleration due to gravity?The amount of force that must be applied to the ground by the jumper to achieve a 4.00 times acceleration upward.
Newton's second law, which states that the net force exerted on an item is equal to its mass times its acceleration, can be used to compute the acceleration brought on by gravity.
The jumper's mass as “m”. Gravitational acceleration is [tex]9.8 \frac{m}{s^2}[/tex], so an acceleration of 4.00 times that amount would be [tex]4.00 \times 9.8, or 39.2[/tex] m/s2. The force the jumper must apply to the ground is determined by:
[tex]F = m \times a[/tex]
F stands for force, m for mass, and a for acceleration.
[tex]F = m \times 39.2[/tex]
Therefore, The jumper's mass multiplied by 39.2 N/kg is the force that must be applied to the ground in order to achieve an upward acceleration that is 4.00 times the acceleration caused by gravity.
Learn more about acceleration here:
https://brainly.com/question/12550364
#SPJ4
On the line before each effect, write the letter of the cause that correctly complete each sentence. Some causes might be more than once.
The light energy absorbed by a surface depends on D. the tilt of the surface.
A beam of light becomes more spread out as E. the beam of light is spread out more.
Some energy is absorbed by Earth's surface when C. the beam of light reaches Earth.
Energy is less concentrated near
G. Earth's poles.
Less energy reaches the poles because
E. the beam of light is spread out more.
Earth is warmest at the equator because
F. energy is concentrated there.
Earth is coldest at the poles because
H. tilt is the greatest there.
Surface temperature depends on the amount of energy absorbed by the surface.
Less energy is received in regions where
E. the beam of light is spread out more.
Earth is warm at the equator and cold at
G. Earth's poles.
What is the motion of the Earth aboutThe Earth moves in a variety of ways through space. Its main motions are:
Rotation: The Earth rotates on its axis, an imaginary line passing through the North and South Poles. This motion causes day and night to occur, and it takes approximately 24 hours for the Earth to complete one rotation.
Revolution: The Earth revolves around the sun in an elliptical orbit, completing one revolution in approximately 365.25 days. This motion is responsible for the changing of the seasons and the length of the year.
Precession: The Earth's axis wobbles as it rotates, like a spinning top.
Learn more about Earth on:
https://brainly.com/question/2599209
#SPJ1
A wire-wound resistor has a resistance of 200 ohms. What voltage applied between the terminals will produce a current of 0.08 amperes?
The voltage across the wire-wound resistor has a resistance of 200 ohms and the current across this circuit of 0.08 amperes will be 160 V.
What is Ohm's law?Ohm's Law is a formula which is used to calculate the relationship between voltage or potential difference across the circuit, the electric current and resistance in an electrical circuit.
The expression for this law will be:
V = IR
where, V is the voltage,
I is the electric current,
R is the resistance across the circuit
V = IR
V = 200 × 0.8
V = 160 volts.
Learn more about Ohm's law here:
https://brainly.com/question/1247379
#SPJ1
Which one of the following properties most fundamentally distinguishes mechanical waves from electromagnetic waves? Mechanical waves have crests and troughs | Mechanical waves require a medium for propagation. | Mechanical waves have well-defined wavelengths. | Mechanical waves move at a finite speed.
The property that most fundamentally distinguishes mechanical waves from electromagnetic waves is that mechanical waves require a medium for propagation.
What are mechanical waves?
Mechanical waves are waves that require a medium in order to travel. Examples of mechanical waves are sound waves, seismic waves, and surface waves. These waves are created by a vibrating object, and the energy created is transferred through the medium, such as air or water.
The vibrations create compression and rarefaction regions, and these pressure changes travel away from the source. Mechanical waves are classified as either longitudinal or transverse. Longitudinal waves involve the particles of the medium vibrating in the same direction as the wave travels. Examples of this type of wave are sound waves. Transverse waves involve the particles of the medium vibrating at right angles to the direction in which the wave travels. Examples of this type of wave are ocean waves.
The property that most fundamentally distinguishes mechanical waves from electromagnetic waves is that mechanical waves require a medium for propagation.
Mechanical waves are waves that travel through a material medium, such as a solid, liquid, or gas, by causing particles in the medium to vibrate and transmit energy from one point to another.
On the other hand, electromagnetic waves do not require a medium and can travel through a vacuum, such as in space. Electromagnetic waves are waves of oscillating electric and magnetic fields, which can travel through space at the speed of light.
While mechanical waves do also typically have crests and troughs, well-defined wavelengths, and move at finite speeds, these properties are not unique to mechanical waves and can also apply to electromagnetic waves. For example, electromagnetic waves also have crests and troughs, well-defined wavelengths, and move at a finite speed.
To know more about Mechanical Waves, visit:
https://brainly.com/question/26116832
#SPJ4
What is the Value of Mu Naught?
Mu naught, also known as vacuum permeability, is a physical constant that represents free space permeability. Its precise value is 4 x [tex]10^{-7}[/tex] henries per meter (H/m).
This constant appears in several electromagnetic equations, including Ampere's law and the Biot-Savart law. It is essential for calculating magnetic fields around electric currents and comprehending electromagnetic waves.
The value of mu nothing is regarded as a basic constant of nature, which means that it is thought to be the same everywhere in the cosmos and is not anticipated to vary throughout time. Its exact value has been found after multiple studies and measurements and is regarded as one.
Learn more about Naughts at
https://brainly.com/question/30404139
#SPJ4
Mu Naught is a physical constant in Physics, specifically the vacuum permeability or the magnetic constant, with a value of approximately 4π x 10^-7 T·m/A.
Explanation:In Physics, Mu Naught is a physical constant, specifically, the vacuum permeability or the magnetic constant. It is used in various equations and calculations involving magnetically related phenomena. The value of Mu Naught is approximately 4π x 10^-7 Tesla meter per ampere (T·m/A).
For example, it is used in the formula of Biot–Savart law and Ampere’s law, which are essential in calculating the magnetic field generated by electric currents.
Learn more about Mu Naught here:https://brainly.com/question/34609224
How do you calculate net power dissipation?
The formula P = IV, where I and V represent current and voltage, is used to compute the power dissipation in an electrical circuit.
Power is lost by any resistor in a circuit that has a voltage drop across it. All resistors have a power rating because the electrical energy is transformed into thermal energy. The resistor can dissipate up to this amount of electricity without burning out. The power of dissipation is determined by the conversion rate.
In order to compute dissipated power, use the formula P = IV.
For instance, suppose the circuit's voltage is 2 V and its current is 20 A. Thus, the power dissipation in the circuit is 40W since P = 20 x 2 P = 40W.
To know more about Power dissipation, visit,
https://brainly.com/question/15015986
#SPJ4
How waves are reflected from ionosphere?
Waves are reflected from the ionosphere due to the ionization of the atmosphere. The ionosphere is a layer of the Earth's atmosphere that is ionized by solar and cosmic radiation. This ionization creates a layer of free electrons that can reflect radio waves back to Earth.
The ionization is the reason why radio waves can travel long distances, even around the curvature of the Earth.
The ionosphere is made up of several layers, each with different levels of ionization. The D layer is the lowest and is responsible for reflecting low frequency radio waves. The E layer is above the D layer and reflects medium frequency radio waves. The F layer is the highest and reflects high frequency radio waves.
The ionosphere of radio waves from the ionosphere is also affected by the angle of incidence of the wave. Waves that hit the ionosphere at a perpendicular angle are more likely to be reflected back to Earth, while waves that hit at a shallow angle are more likely to pass through the ionosphere and continue into space.
Waves are reflected from the ionosphere due to the ionization of the atmosphere and the angle of incidence of the wave. This reflection allows radio waves to travel long distances and is an important aspect of radio communication.
To know more about ionosphere here:
https://brainly.com/question/6575350#
#SPJ11
is 0.5 a strong correlation?
In most situations, the strong correlation usually ranges between 0.7 to 0.9. So 0.5 is not a strong correlation.
Correlation is an important concept in statics. This helps to associate the relationship between two variables. This is of two types namely positive correlation and negative correlation.
In a positive correlation, the association of two variables occurs in the same way. That is they both decrease or increase. In a negative correlation, the association of one variable occurs oppositely to another variable. That is, when one variable decreases, another variable increases.
This correlation is represented by the symbol r. This r-value range from +1 to -1. So the perfect positive correlation is +1 and the perfect negative correlation is -1.
In, the positive correlation, the values from 0.1 to 0.3 is considered weak or low correlation. The values from 0.4 to 0.6 are considered a moderate correlation and the values from 0.7 to 0.9 are considered a strong correlation.
To know more about correlation:
https://brainly.com/question/22340487
#SPJ4