a sample of what looks like silver has a mass of 1.7 kg and a volume of 0.164 liters is it really silver

Answers

Answer 1

Answer:

It is not 100% silver, but it contains a high percentage (more than the 98% for sure) of silver.

Explanation:

Hello,

In this case, since the density of silver is 10.49 g/cm³, we can substantiate if the given sample is silver by computing is density as shown below:

[tex]\rho =\frac{m}{V}=\frac{1.7kg}{0.164L}*\frac{1000g}{1kg} *\frac{1L}{1000cm^3}\\ \\\rho=10.37g/cm^3[/tex]

In such a way, since we find a slight difference in the computed density, we can say it is not 100% silver, but it contains a high percentage (more than the 98% for sure) of silver.

Regards.


Related Questions

What is the mass in grams of 366mL of ethylene glycol

Answers

Answer:

[tex]m=406.26g[/tex]

Explanation:

Hello,

In this case, since the density is defined as the degree of compactness of a substance and it mathematically defined as the ratio of the mass and volume:

[tex]\rho = \frac{m}{V}[/tex]

By knowing that its density is 1.11 g/mL, the mass in 366 mL is:

[tex]m=\rho V=366mL*1.11\frac{g}{mL}\\ \\m=406.26g[/tex]

Regards.

how many significants are in 54.0047

Answers

Answer:

There are 6

Explanation:

The significant figures in that number are  5 4 0 0 4 7

Hope this helps:)

Consider the following reaction at 298K.
2 H+(aq) + 2 Cr2+(aq) =H2(g) + 2 Cr3+(aq)
Which of the following statements are correct?
a) K > 1
b) ΔGo < 0
c) Eocell < 0
d) n = 2 mol electrons

Answers

The question is incomplete, the complete question is;

Consider the following reaction at 298K.

2 H+(aq) + 2 Cr2+(aq) =H2(g) + 2 Cr3+(aq)

Which of the following statements are correct?

Choose all that apply.

K > 1

ΔGo < 0

Eocell < 0

n = 2 mol electrons

The reaction is reactant-favored.

Answer:

K > 1

ΔGo < 0

n = 2 mol electrons

Explanation:

If we look at the reaction; 2 H+(aq) + 2 Cr2+(aq) -----> H2(g) + 2 Cr3+(aq), we will notice that the reaction is a spontaneous reaction because E°cell= 0-(-0.41) = 0.41 V

If the reaction is a spontaneous electrochemical process, we expect it to be product favoured with K>1. Also, a spontaneous reaction must have ∆G<0.

Lastly, we can see that two electrons were transferred according to the balanced equation for the electrochemical reaction.

A chemistry student answered 81 questions correctly on a 90-question test. What
percent of the questions did they get CORRECT?
HURRY PLEASE

Answers

Answer:

90%

Explanation:

it will be 81/90 ×100/1

81 over 90 × 100 over 1

What electron configuration repreents the first excited state of phosphorus?
A. 1s2 2s2 2p6 3s2 3p2 4s1
B. 1s2 2s2 2p6 3s2 3p4
C. 1s2 2s2 2p6 3s1 3p4
D. 1s2 2s2 2p6 3s2 3p3 4s1
E. 1s2 2s2 2p6 3s2 3p3

Answers

Answer:

Option C:

1s2 2s2 2p6 3s1 3p4

Explanation:

At a ground level, Phosphorous has an electronic configuration of 1s2 2s2 2p6 3s2 3p3 (using the spdf notation).

Once the atom becomes excited, an electron from the 3s sub-level will gain energy and jump over to the 3p sub-level, making the configuration 1s2 2s2 2p6 3s1 3p4.

The number of electrons at the 3p sub-level will now become 4 because of the addition of the new electron while the number of atoms at the 3S sub-level will reduce to 1 because an electron left this sub-level.

For each name, draw the structure.
a) (E)-5-Methyl-2-hexene
b) (S)-1,1,2-Trichloro-2-fluoroethane
c) 2,5-Diethyl-1-methylcyclohexanol

Answers

Answer:

See figure 1

Explanation:

For this question, we can analyze each molecule:

-) (E)-5-Methyl-2-hexene

In this case, we have a carbon chain of 6 carbons. We have a double bond between carbons 3 and 2. Also, we have a methyl group is placed on carbon 5. Finally, the "E" configuration makes reference to the double bond,  the groups on each side of the double bond must have an opposite configuration.

-) 2,5-Diethyl-1-methylcyclohexanol

In this molecule, we have a carbon chain of 2 carbons. In carbon 2 we have two chlorine atoms. In carbon 1 we have a fluorine atom and a chlorine atom. The "S" configuration makes reference to carbon 1 (the chiral carbon), so we have to assign the priorities for each group bonded to carbon 1:

1 = Chlorine

2 = Fluorine

3 = Carbon 2

4 = Hydrogen

If we need an "S" configuration the priorities must be placed in such a way that we have a counterclockwise orientation.

-) 2,5-Diethyl-1-methylcyclohexanol

In this molecule, we have a cyclic carbon chain of 6 carbons. In carbon 1 we have an "OH" group and a methyl group. In carbon s 2 and 5, we have ethyl groups.

See figure 1

I hope it helps!

Nuclear fusion always results in
A. a net loss of mass
B. a net gain of mass
C. no change in mass (mass is conserved)
D. depends on the nucleons that fuse

Answers

Answer:

D

Explanation:

In this time there are made a lot of nuclear bombs so itatters on how what how much damage it makes according to its capacity in my opinion.

Nuclear reaction of which nuclear fusion is a type  which depends on the nucleons that fuse as the total mass of single nucleus is less than that of two original nuclei.

What are nuclear reactions?

There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.

In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.

In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.

Learn more about nuclear reactions,here:

https://brainly.com/question/12786977

#SPJ5

A proposed mechanism for the reaction: 2 H2 + 2NO - N2 + 2H30 Step 1: H2g) + 2NO () - N2O (g) + H20) (slow) Step 2: N20cm) + H2 (g) - N2 (g) + H2O) (fast) What is the rate law and the intermediate respectively

Answers

Answer:

[tex]\text{Rate} = k\, [\mathrm{H_2\, (g)}]\cdot [\mathrm{NO\, (g)}]^2[/tex].

[tex]\rm N_2O\, (g)[/tex] is the intermediate.

Explanation:

Rate

Balanced overall reaction: [tex]\rm 2\, H_2\, (g) + 2\, NO\, (g) \to N_2\, (g) + 2\, H_2O\, (g)[/tex].

Proposed mechanism:

[tex]\rm H_2\, (g) + 2\, NO\, (g) \to N_2O\, (g) + H_2O \, (g)[/tex] (slow.)[tex]\rm N_2O\, (g) + H_2\, (g) \to N_2\, (g) + H_2O\, (g)[/tex] (fast.)

Start with the slowest, rate-determining step of the proposed mechanism. Here, the rate-determining step is [tex]\rm H_2\, (g) + 2\, NO\, (g) \to N_2O\, (g) + H_2O \, (g)[/tex].

There are two species on the reactant side of this intermediate reaction: [tex]\rm H_2\, (g)[/tex]  and [tex]\rm NO_2\, (g)[/tex]. The concentration of both of them should be in the rate expression of this step.

On the other hand, the coefficient of [tex]\rm H_2\, (g)[/tex] is one while the coefficient of [tex]\rm NO_2\, (g)[/tex] is two. Therefore, in the rate expression of this step, the concentration of [tex]\rm H_2\, (g)\![/tex] should have a power of one, while the concentration of [tex]\rm NO_2\, (g)\![/tex] should have a power of two.

include the rate constant [tex]k[/tex] to obtain the rate expression of the rate-determining slow step:

[tex]\text{Rate} = k\, [\mathrm{H_2\,(g)}]\cdot [\mathrm{NO\, (g)}]^2[/tex].

Make sure that all species in this rate expression are on the reactant side of the overall balanced reaction. Otherwise, further steps would be required to obtain the rate law of the overall reaction.

Therefore, by this proposed mechanism, the rate law of the overall reaction would be [tex]\text{Rate} = k\, [\mathrm{H_2\,(g)}]\cdot [\mathrm{NO\, (g)}]^2[/tex].

Intermediate

In a proposed reaction mechanism, a species is an intermediate if it appeared in one of the proposed steps, but not in the balanced overall equation.

The two steps of this proposed mechanism mentioned five species:

[tex]\rm H_2\, (g)[/tex].[tex]\rm NO\,(g)[/tex].[tex]\rm N_2O\, (g)[/tex].[tex]\rm H_2O\, (g)[/tex].[tex]\rm N_2\, (g)[/tex].

With the exception of [tex]\rm N_2O\, (g)[/tex], all the other species appeared in the overall balanced equation. Therefore, [tex]\rm N_2O\, (g)\![/tex] is the intermediate.

taxes you pay to the federal government are: A.federal taxes B.import taxes C.state taxes D.export taxes

Answers

Answer:

A federal taxes

Explanation:

because these are taxes paid to the federal government of a state

Answer:

Hey there!

As the name suggests, you pay Federal Taxes to the government.

Let me know if this helps :)

pleaaaaaaaaaaaaaaaase answerrrrrrr quickkkkkkkkkkk am scared can somebody write me a small kinda article about fractional distillation that could consist of points and paragraph both

Answers

Answer:

Hey!I think I can help....

Simple Distillation cannot be used to separate a mixture of two or more miscible liquids Fractional Distillation is used to separate such a mixture into its component parts or fractions. The fractions distil over in ascending order of their boiling points,starting with the fraction with the lowest boiling points. For efficient fractional distillation,the difference in the boiling points between successive fractions must be more than 10°C.In the laboratory,the apparatus for fractional distillation is same as the apparatus for simple distillation, except that a fractioning column is introduced between the distillation flask and the condenser.The fractionating column is packed with glass beads,and does the actual separation. The upper part of the column is at a lower temperature than the lower part .Only the vapour with the same temperature as the upper part of the fractionating column passes on the condenser.(This is the fraction with the lowest boiling point)Vapours with higher boiling points condense as they enter the upper part of the fractionating column and the flow back into the distillation flask.This process is repeated until the fraction with the lowest boiling point is distilled over completely. Then,the temperature in the upper part of yhe column rises until the boiling point of the next fraction is reached. This fraction then starts distilling over.The fractional distillation process continues until Al the component fractions in the mixture distil over.Crude oil or petroleum contains many important natural products such as petrol,kerosene,diesel, heavey oil,natural gases and bitumen.Each of these products can be recovered in its pure form by fractional distillation. The fractional distillation plant is made up of two maim parts----boiler,where the crude oil is kept boiling, and the fractionating tower,where yhe actual separation takes place.The fractions with the lower boiling points will emerge near the top part of the tower while those with higher boiling points will come out near the lower part of the tower..... Thank you for the question, I hope it helps you...Thank you.

A 0.0447−mol sample of a nutrient substance, with a formula weight of 114 g/mol, is burned in a bomb calorimeter containing 6.19 × 102 g H2O. Given that the fuel value is 6.13 × 10−1 in nutritional Cal when the temperature of the water is increased by 5.05°C, what is the fuel value in kJ in scientific notation?

Answers

Answer:

The value is  [tex]x = 2.565 *10^{3} \ kJ/kg[/tex]

Explanation:

From the question we are told that

  The  no of moles of the sample is  n = 0.0447 mole

  The formula weight is  [tex]M = 114 \ g/mol[/tex]

   The  mass of water is  [tex]m = 6.19 *10^{2}\ g[/tex]

   The amount of the fuel is  [tex]f= 6.13*10^{-1} \ nutritional \ Cal[/tex]

   The temperature rise is  [tex]\Delta T = 5.05^o[/tex]

Generally

      [tex]1 \ nutritional \ Cal => 4.184*10^{3} \ kJ/kg[/tex]

=>  [tex]f= 6.13*10^{-1} \ nutritional \ Cal \to x[/tex]

=>     [tex]x = \frac{6.13 *10^{-1} * 4.184 *10^{3}}{1}[/tex]

=>     [tex]x = 2.565 *10^{3} \ kJ/kg[/tex]

   

When 1.095 grams of NaOH was dissolved in a coffee cup calorimeter containing 150.00 grams of water, the temperature of the solution changed from 23.50 degree C to 25.32 degree C.
a) Calculate the heat of solution, Delta H_soln.
b) Calculate the Delta H_soln/mole of NaOH. The molar mass of NaOH is 40.00 grams/mole.
c) Is the heat of solution exothermic or endothermic?

Answers

Answer:

1. HEAT OF SOLUTION IS 1149.47 J

2. HEAT OF SOLUTION PER MOLE OF NaOH IS 41989.77 J/MOL OR 41.989 KJ/MOL

3. THE REACTION IS EXOTHERMIC

Explanation:

Mass of water = 150 g

Mass of NaOH = 1.095 g

Change in temperature = 25.32 - 23.50 = 1.82 C

Total mass of the mixture = 150 + 1.095 = 151.095 g

Specific heat capacity of water = 4.18 J/ g C

So to calculate the heat of solution, we have:

1. Heat of solution = mass * specific heat * change in temperature

Heat of solution = 151.095 * 4.18 * 1.82

Heat of solution = 1149.47 J

The heat of solution is therefore 1149.47 J or 1.15 kJ

2. Heat of solution per mole

1.095 g of NaOH produces 1149.47 J of heat

1 mole of NaOH contains 40 g

In other words:

1.095 g = 1149.47 J

40 g = x J

xJ = 40 * 1149.47 / 1.095

xJ = -41989.77 J

The heat of solution per mole of NaOH is -41.989 kJ / mol

3. The reaction is exothermic that is heat is evolved from the reaction. This is indicated by the negative sign.

Nurse Antonio measured out 7 grams of sodium chloride (NaCI). Using dimensional analysis, calculate how many moles of NaCI he weighed out.

Answers

Answer:

0.119 moles

Explanation:

Given that,

Mass measured by Nurse Antonio is 7 grams of NaCl

To find,

The no of moles of NaCl

Solution,

The number of moles is given by

[tex]n=\dfrac{m}{M}[/tex]

m is given mass

M is molar mass

For NaCl, molar mass is 23+35.5 = 58.5 grams

So,

[tex]n=\dfrac{7}{58.5}\\\\n=0.119\ \text{moles}[/tex]

Therefore, there are 0.119 moles of NaCl.

What kind of intermolecular forces act between a chloramine NH2Cl molecule and a water molecule?
Note: If there is more than one type of intermolecular force that acts, be sure to list them all, with a comma between the name of each force.

Answers

Answer:

Dispersion forcesHydrogen bondingDipole-dipole force

Explanation:

Dispersion force is caused by weak Van der Waals attraction between molecules.

Because chloroamine and water are both polar solvents, dipole-dipole force of attraction exists between them. There is also hydrogen bonding present from the water molecules.

Answer: The forces present include;

1. Hydrogen bonding

2. Dispersion bonding

3. Dipole to Dipole bonding.

Explanation:

1. Hydrogen bonding is an electrostatic force that occur between atoms of hydrogen which is covalently bonded to electronegative atoms.

2. Dispersion force is type of force that occur between molecules which is caused by weak Van der Waals attraction between molecules.

3. Dipole -Dipole force occur when atoms with partial charges within a molecule attract themselves with another opposite opposite partial charge that is around the molecule.

Therefore,

Because chloroamine and water are both polar solvents, hydrogen bond, dispersion force and dipole-dipole force of attration occur between them. The hydrogen bonding occur between the water molecules.

Why are atoms of carbon-14(C-14) unstable?

Answers

they are a radioactive form of carbon, they are bad bc they have too many neutrons for its six protons, making it unstable

To cool 250 mL of coffee at 90.0°C, you put a 80 g metal spoon cooled to 0.0°C in the coffee. After thermal equilibrium has been reached, what is the final temperature of your coffee? Assume energy is exchanged only between the spoon and the coffee. The specific heat capacity of the metal spoon is 0.80 J/(g°C). Assume the specific heat and density of coffee are the same as those of water, 4.18 J/(g · °C) and 1.00 g/mL. Keep one decimal in your answer.

Answers

Answer:

The correct answer is 84.81 °C.

Explanation:

Based on the given information, the volume or mass of coffee is 250 ml, and the mass of metal spoon is 80 grams. The specific heat capacity of metal spoon is 0.80 J/g °C, and the specific heat capacity of coffee is 4.18 J/g °C. In the given case, heat is lost from the coffee and is gained by the spoon.  

For finding the final temperature of the coffee, the formula to be used is Q = msΔT, here m is the mass, s is the specific heat, and ΔT is the change in temperature.  

Heat lost from the coffee = Heat gained by the spoon

250 × 4.18 (90 - T2) = 80 × 0.8 (T2 - 0)

1045 (90 - T2) = 64 (T2 -0)

94050 - 1045 T2 = 64 T2

94050 = 1045 T2 + 64 T2

94050 = 1109 T2

T2 = 84.84 °C

A standard galvanic cell is constructed in which a Cu^2+ | Cu^+ half cell acts as the cathode Which of the following statements are correct?
(Choose all that apply)
A. Cr^3+|Cr could be the other standard half cell.
B. As the cell runs, anions will migrate from the other compartment to the Cu^2+|Cu^+ compartment.
C. I_2|I^- could be the other standard half cell.
D. Cu^+ is oxidized at the cathode.
E. In the external circuit, elections flow from the other compartment to the Cu^2+|Cu^+ compartment

Answers

Answer:

E. In the external circuit, elections flow from the other compartment to the Cu^2+|Cu^+ compartment

Explanation:

In a galvanic cell, electrons flow from anode to cathode. We must remember that oxidation occurs at the anode and reduction occurs at the cathode. Hence the process; M(s) -------> M^+(aq) + e occurs at the anode.

The electrons lost at the anode are conveyed to the cathode where they are accepted by other chemical species and are reduced to the corresponding reduced species according to the reaction; M^+(aq) + e -----> M(s)

Hence the Cu^2+ | Cu^+ half cell, being the cathode accepts electrons from the other half cell for this reduction reaction to take place, hence the answer

When you're deciding what to eat, you may want to consider the environmental impact of your meal. Rank these four foods according to the amount of resources (land or grain) required to produce 1kg of each.
1. Egg
2. Chicken
3. Pork
4. Beef
A. Least resources required
B. Most resources required

Answers

Answer:

From the most resources to the least, it is 3, 4, 2, 1.

Explanation:

Pork is a large animal but not as much as a cow but it also does not produce as much meat as a cow. In terms of land required and total meat produced, pork is the highest on this list so it is option B.

The most amount of land and resources are taken up by cows, but they also produce a lot more meat than porks so they are in the second place on this list.

Chickens require a small amount of space but produce little meat.

If we guess that each egg weighs 60 grams, 1 kg of eggs equals to almost 17 eggs which a single chicken can produce easily. So the eggs require the least resources which means that they are option A.

I hope this answer helps.

An aerosol is a colloidal _____ suspended in a _____. A.liquid B.solid C.gas

Answers

Answer:

An aerosol is a colloidal A. liquid suspended in a C. gas.

Explanation:

Hence an aerosol is a colloidal solid or liquid suspended in a gas Smoke or fog, for example.

define aerosol?

Aerosol is a system of equally dispersed, finely divided liquid or solid particles passing through a gas, often air. Dust and other aerosol particles, which serve as the nuclei for condensation and freezing, are crucial to the precipitation process.

Which two forms of aerosols exist?

Secondary aerosols develop when gas is converted into a particle, whereas primary aerosols are made up of particles that are added directly to the gas. Key aerosol categories include sulfates, organic carbon, black carbon, nitrates, mineral dust, and sea salt. These substances typically clump together to create complicated mixtures.

To know more about  aerosol visit:

https://brainly.com/question/12656218

#SPJ2

Acetic acid and water react to form hydronium cation and acetate anion, like this: (aq)(l)(aq)(aq) Imagine of are added to a flask containing a mixture of , , and at equilibrium, and then answer the following questions. What is the rate of the forward reaction before any HCH3CO2 has been added to the flask

Answers

The question is incomplete. Here is the complete question.

Acetic acid and water react to form hydronium cation and acetate anion, like this:

[tex]HCH_{3}CO_{2}_{(aq)}+H_{2}O_{(l)} -> H_{3}O^{+}_{(aq)}+CH_{3}CO_{2}^{-}_{(aq)}[/tex]

Imagine 226 mmol of [tex]CH_{3}CO_{2}^{-}[/tex] are added to a flask containing a mixture of [tex]HCH_{3}CO_{2}[/tex], [tex]H_{2}O[/tex],[tex]H_{3}O^{+}[/tex] and [tex]CH_{3}CO_{2}^{-}[/tex] at equilibrium and then answer the following questions:

1) What's the rate of the reverse reaction before any [tex]CH_{3}CO_{2}^{-}[/tex] has been added to the flask?

a) 0

b) Greater than 0, but less than the rate of the forward reaction

c) Greater than 0, but equal to the rate of the forward reaction

d) Greater than 0, but  greater than the rate of the forward reaction

2) What is the rate of the reverse reaction just after the [tex]CH_{3}CO_{2}^{-}[/tex] has been added to the flask?

a) 0

b) Greater than 0, but less than the rate of the forward reaction

c) Greater than 0, but equal to the rate of the forward reaction

d) Greater than 0, but  greater than the rate of the forward reaction

3) What is the rate of the reverse reaction when the system has again reached equilibrium?

a) 0

b) Greater than 0, but less than the rate of the forward reaction

c) Greater than 0, but equal to the rate of the forward reaction

d) Greater than 0, but  greater than the rate of the forward reaction

4) How much more [tex]CH_{3}CO_{2}^{-}[/tex]  is in the flask when the system has again reached equilibrium?

a) None

b) Some, but less than 226 mmol

c) 226 mmol

d) More than 226 mmol.

Answer: 1) c) Greater than 0, but equal to the rate of the forward reaction

2) d) Greater than 0, but  greater than the rate of the forward reaction

3) c) Greater than 0, but equal to the rate of the forward reaction

4) b) Some, but less than 226 mmol

Explanation: A reversible chemical reaction reaches its equilibrium when forward and reverse reaction are at the same rate. At that point, equilibrium has a constant called K.

Equilibrium constant depends on the concentration of its products and reagents.

For the reaction [tex]HCH_{3}CO_{2}_{(aq)}+H_{2}O_{(l)} -> H_{3}O^{+}_{(aq)}+CH_{3}CO_{2}^{-}_{(aq)}[/tex],

the forward is towards production of [tex]CH_{3}CO_{2}^{-}[/tex] and reverse is towards the production of [tex]HCH_{3}CO_{2}[/tex].

1) When equilibrium is reached, forward and reverse are at the same rate and are different from zero.

2) When adding a compound, the equilibrium is broken. So, to go back to the equilibrium, reaction tend to counteract the change. In the case of acetic acid and water above, when adding acetate anion, the reverse reaction will produce more acetic acid to restore equilibrium, so reverse reaction will be at a greater rate and different from 0.

3) After a while when the system is back to the equilibrium, the rate will be equal again.

4) After second equilibrium, acetate anion will have less mmol than when this new equilibrium state started.

Ammonium phosphate is an important ingredient in many fertilizers. It can be made by reacting phosphoric acid with ammonia . What mass of ammonium p

Answers

Answer:

7.5 g

Explanation:

There is some info missing. I think this is the original question.

Ammonium phosphate ((NH₄)₃PO₄) is an important ingredient in many fertilizers. It can be made by reacting phosphoric acid (H₃PO₄) with ammonia (NH₃). What mass of ammonium phosphate is produced by the reaction of 4.9 g of phosphoric acid? Be sure your answer has the correct number of significant digits.

Step 1: Write the balanced equation

H₃PO₄ + 3 NH₃ ⇒ (NH₄)₃PO₄

Step 2: Calculate the moles corresponding to 4.9 g of phosphoric acid

The molar mass of phosphoric acid is 98.00 g/mol.

[tex]4.9 g \times \frac{1mol}{98.00g} = 0.050mol[/tex]

Step 3: Calculate the moles of ammonium phosphate produced from 0.050 moles of phosphoric acid

The molar ratio of H₃PO₄ to (NH₄)₃PO₄ is 1:1. The moles of (NH₄)₃PO₄ produced are 1/1 × 0.050 mol = 0.050 mol.

Step 4: Calculate the mass corresponding to 0.050 moles of ammonium phosphate

The molar mass of ammonium phosphate is 149.09 g/mol.

[tex]0.050mol \times \frac{149.09 g}{mol} = 7.5 g[/tex]

What is the chemical potential of an element in its standard state? Select the correct answer below: −1.00kJ/mol 0kJ/mol 1.00kJ/mol 9.384kJ/mol

Answers

Answer:

0 kJ/mol.

Explanation:

Hello,

In this case, since the chemical potential can be represented in terms of the Gibbs free energy of formation:

[tex]\mu = \frac{\Delta _fG}{n}[/tex]

Thus, since the Gibbs free energy of formation of an element is zero, the chemical potential is also zero, or just 0 kJ/mol.

Best regards.

What happens to the flame of a Bunsen burner when there is an adequate supply of oxygen available to react with the fuel

Answers

Answer:

The answer to your question is given below.

Explanation:

When there is an adequate supply of oxygen available to react with the fuel of a bunsen burner, the flame produce is a non luminous bunsen flame.

This flame i.e non luminous flame produced is much hotter than the luminous and three zones can be seen in the flame. This zones are

1. The zone of unburnt gas.

2. The luminous zone.

3. The outermost non luminous zone.

When an adequate supply of oxygen is available to react with the fuel of a Bunsen burner, there is complete combustion of the fuel and a non-luminous flame is produced.

Complete combustion occurs where there is plentiful supply of oxygen. During the reaction, more heat energy is produced as the flame is non-luminous and less soot is produced.

A non-luminous flame is a flame which produces less light but more heat energy. It is usually blue in color and consists of three zones. These zones are:

1. The zone of unburnt gas.

2. The luminous zone.

3. The outermost non luminous zone.

Learn more at: https://brainly.com/question/23857016

Which of the following substances has the strongest intermolecular forces?
a. HCl
b. C8H18
c. CH3OH
d. CH4
e. CO2

Answers

Answer:

HCl.

Explanation:

Of all the type of bond, Ionic bonds are the strongest. Among all the compounds in the options only HCl has ionic bond, rest have covalent bonds. So, the strongest intermolecular forces is in HCl.  Ionic bond are formed with the transfer of electrons, one atom is donor and the other is acceptor.

. What is the difference between the geometries of the bonding of the two oxygen atoms in acetic acid

Answers

Answer:

One oxygen atom is tetrahedral while the other is trigonal planar

Explanation:

Acetic acid contains two oxygen atoms. The two oxygen atoms are different and have different geometries.

The first oxygen atom which is part of the carbonyl moiety in the molecule is in a trigonal planar geometry since it is sp2 hybridized.

The second oxygen atom is in sp3 hybridized state hence it is tetrahedral.

Thus one oxygen atom is tetrahedral and the other is trigonal planar in acetic acid.

Write a chemical equation for the reaction that occurs in the following cell: Cu|Cu2+(aq)||Ag+(aq)|Ag. Of the two metals, copper and silver, which is the anode and which is the cathode?

Answers

Answer:

Explanation:

We are to write a chemical equation for the reaction that occurs in the following cell: Cu|Cu2+(aq)||Ag+(aq)|Ag.

And to determine which one of the two metals, (copper and silver) is the anode and which is the cathode?

The chemical equation for the reaction is as follows:

[tex]\mathbf{Cu + 2Ag^+ \to Cu^{2+}+2Ag}[/tex]

The atoms of the Copper electrodes undergo oxidation and loses two electrons each to form copper II ions [tex](Cu^{2+})[/tex] which go into the solution. The copper then becomes negatively charged and functions as the negative electrode i.e the anode

The oxidation half reaction is:

[tex]\mathsf{Cu \to Cu^{2+} + 2e^-}[/tex]

The silver ions [tex]Ag^+[/tex] becomes reduced by gaining  two electrons each from the metallic copper which was deposited into the silver electrode. The  silver electrode thus becomes positively charged and functions as the positive electrode. i.e the cathode.

The reduction half reaction is:

[tex]\mathtt{Ag^+ + 1 e^- \to Ag}[/tex]

A pool is 34.0 m long and 31.0 m wide. How many mL of water are needed to fill the pool to an average depth of 4.98 ft? Enter your answer in scientific notation.

____x10___mL

Answers

Answer:

Amount of water in mL = 1.75⁹ × 10 ml (Approx)

Explanation:

Given:

Length of pool = 34 m

Width of pool = 31 m

Height of pool = 4.98 ft

Find:

Amount of water in mL

Computation:

1 ft = 0.3048 m

Height of pool = 4.98 (0.3048)

Height of pool = 1.5179 m

Volume of pool = (34)(31)(1.5179)

Volume of pool = 1,754.70 m³

1 m³ = 10⁶ ml

Amount of water in mL = 1,754.70 × 10⁶ ml

Amount of water in mL = 1.75⁹ × 10 ml (Approx)

Calculate the freezing point of a solution of 500.0 g of ethylene glycol dissovled in 500g water. Kf = 1.86 degrees C/m and Kb (which my instructor said was just extraneous info that is not used here) is 0.512 degrees C/m.

Answers

Answer: [tex]T_{f}[/tex] = -29.96 °C

Explanation: A solution has a lower freezing point compared to the pure solvent, due to the solute lowering the vapor pressure of the solvent.

The "new" freezing point is calculated as:

[tex]\Delta T_{f} = K_{f}.m[/tex]

[tex]K_{f}[/tex] is the molal freezing-point depression constant

m is molality concentration, i.e., moles of solute per kilogram of solvent

Before calculating freezing point, let's find moles of ethylene glycol ([tex]C_{2}H_{6}O_{2}[/tex]) in the solution:

Molar mass [tex]C_{2}H_{6}O_{2}[/tex] = 62.08 g/mol

For 500 g:

[tex]n = \frac{500}{62.08}[/tex]

n = 8.05 moles

The molality concentration for 0.5kg of water:

m = [tex]\frac{8.05}{0.5}[/tex]

m = 16.11

The freezing point will be:

[tex]\Delta T_{f} = K_{f}.m[/tex]

[tex]\Delta T_{f} = -1.86*16.11[/tex]

[tex]\Delta T_{f} = -29.96[/tex]

Freezing point of a solution of Ethylene Glycol and Water is -29.96°C

Which of the following substituents is a moderate activator and an o/p director in electrophilic aromatic substitution reactions?
A) -Br
B) -SO3H
C) -CO2H
D) -NHCOR
E) -CHO

Answers

Answer:

NHCOR

Explanation:

In electrophilic aromatic substitution, certain substituents on the aromatic ring such as

-NHCOR are known to enhance ortho-para substitution. These ortho-para activating groups stabilizes the intermediate cation.

These ortho-para activating groups usually consists of species that donate electron density towards the reaction centre thereby stabilizing the carbocation and making the reaction faster.

A student determines the mass of a metal rod to be 39.35 g. it is places in 10.00 mL of water, and the water level rises to 15.00 mL. What is the density of the rod?

Answers

Answer:[tex]\rho=7.87g/mL[/tex]

Explanation:

Hello,

In this case, we are analyzing a problem in which the Archimedes principle is considered, thus, as the volume of the metal rod is determined by the difference between the mass of the water and the mass of the water and the rod:

[tex]V_{rod}=15.00mL-10.00mL=5.00mL[/tex]

In such a way, the density turns out:

[tex]\rho =\frac{m_{rod}}{V_{rod}}=\frac{39.35g}{5.00mL} \\ \\\rho=7.87g/mL[/tex]

Regards.

Other Questions
What is the distance between the two points (5, -2) and (-3, 8)? In the Depositions for the Boston Massacre Trials, who does Isaac Pierce blame for the massacre?A. the CitizensB. The CaptainC. the Civil OfficerD. the Governor The distance measured between five successive crests of a wave motion executed by a photon of an electromagnetic radiation is 2.4cm. what is the frequency of the photon Personal Communication Fees An Internet ,telephone, and cable TV package plan costs month 90$ each month .The Internet part the bill is 35$. The telephone bill is $14 Write the ratio of the Internet bill to the cable TV bill in three different ways 472 + 278 + 694 + 73 + 217 =O 1,7341,824O 1,714O 1,634 A polar bear runs at a speed of 11 m/s and has a mass of 380.2 kg. How much Kinetic energy does the bear have? Arnell Industries has $35 million in permanent debt outstanding. The firm will pay interest only on this debt. Arnell's marginal tax rate is expected to be 30% for the foreseeable future. a. Suppose Arnell pays interest of 9% per year on its debt. What is its annual interest tax shield? b. What is the present value of the interest tax shield, assuming its risk is the same as the loan? c. Suppose instead the interest rate on the debt were 7%. What is the present value of the interest tax shield in this case? The scientific method is an order of steps that is followed and the first step of scientific inquiry is often ____________________________________Group of answer choicesDesign the experimentInterpret datadevelop a hypothesisDeveloping the problem Consider the plant phenotypes: RR is red (dominant) and WW is white (dominant) What type of inheritance will be shown where the alleles from eachparent blend together in the expressed phenotype of the offspring? (1 point)O codominanceO epistatisO intermediate inheritanceO recessive inheritance what are the similarities and differences between Hispanic culture and your culture PLEASE HELP MEEEEEE :((( What was the population of the North in 1860? Determine if the following table represents a quadratic function. X 1 2 3 4 5 Y 13 22 37 58 85 A turntable of radius R1 is turned by a circular rubberroller of radius R2 in contact with it at their outeredges. What is the ratio of their angular velocities,1 / 2 ? Think of the meaning of the word inferior and then write a sentence using that anatomical term. Give a tight bound on the number of times the z = z + 1 statement is executed. i = 2 while ( i > 1 ) { i = floor(i/2) z = z + 1 } Evaluate the expression below for s = 4 and t = 6.3st^2-s^2 Find the length of AB to the nearest hundredth some characteristics of civilization share are What volume is equivalent to 12.0m^3