A sample of a gas occupies 460 ML at 70.0 degree celcius and 1.00 atmosphere. At what temperature would the gas occupy 650 ML at the same pressure

Answers

Answer 1

approximately 210.92°C to occupy a volume of 650 mL at 1.00 atm pressure.

Answer 2

At the same pressure of 1.00 atmosphere, the gas would occupy 650 mL at a temperature of approximately 212.33 degrees Celsius.

To solve this problem, we use combined gas law equation:

(P₁ × V₁) / T₁ = (P₂ × V₂) / T₂

Where:

P₁ = Initial pressure

V₁ = Initial volume

T = Initial temperature

P₂ = Final pressure (same as initial pressure)

V₂ = Final volume

T₂ = Final temperature

Given:

P₁ = P₂ = 1.00 atm (pressure remains constant)

V₁ = 460 mL

T₁ = 70.0 degrees Celsius (converted to Kelvin)

V₂ = 650 mL

First, let's convert the initial temperature to Kelvin:

T₁(K) = T₁(°C) + 273.15

T₁(K) = 70.0 + 273.15

T₁(K) = 343.15 K

Now we plug in the values into the combined gas law equation and solve for T₂

(1.00 × 460) / 343.15 = (1.00 × 650) / T₂

Simplifying the equation:

460 / 343.15 = 650 / T₂

Cross-multiplying and solving for T₂

460 × T₂ = 650 × 343.15

T₂ = (650 × 343.15) / 460

Calculating T₂

T₂ = 485.48 K

Now, let's convert the final temperature from Kelvin back to degrees Celsius:

T₂(°C) = T₂(K) - 273.15

T₂(°C) = 485.48 - 273.15

T₂(°C) = 212.33°C

Therefore, at the same pressure of 1.00 atmosphere, the gas occupied 650 mL at a temperature of approximately 212.33 degrees Celsius.

To know more about gas occupied here

https://brainly.com/question/20958457

#SPJ2


Related Questions

Which of the following are things to avoid during this column chromatography experiment? Choose all that apply.

Answers

To ensure successful column chromatography, you should take care to avoid introducing too much solvent, adding too much sample, not allowing enough time, not adjusting the pH of the eluent, using a column that is too long, not allowing the column to equilibrate, and using a packing material that is too coarse.

The following should be avoided during a column chromatography experiment:
1. Introducing too much solvent at once - this can cause flooding and may affect the separation.
2. Adding too much sample to the column - this can lead to inefficient separation.
3. Not allowing enough time for the chromatography to run - this can lead to incomplete separation.
4. Failing to adjust the pH of the eluent to match the sample - this can lead to poor resolution.
5. Using a column that is too long - this can lead to band broadening and poor separation.
6. Not allowing the column to equilibrate before running the sample - this can lead to poor resolution.
7. Using a column with a packing material that is too coarse - this can lead to inefficient separation.
For more such questions on chromatography

https://brainly.com/question/17233520

#SPJ11

4. What volume, in cm', of 0. 100 moldm³ H₂SO, will produce an acid salt using 50.00cm³ of 0.200 moldm³ KOH solution? -3 C 75.00 D. 100.00 A. 25.00 B. 50.00 C 75.00​

Answers

Answer:

50.00 cm³

Explanation:

Relevant formula:

n = V × c

n = number of moles (mol)

V = volume (dm³)

c = concentration (mol/dm³)

1. Work out moles of KOH

V = 50cm³ = 0.05dm³

Note: remember to convert to the right units (1 dm³ = 1000cm³)

c = 0.2

n = 0.05 × 0.2

n = 0.01

2. Use balanced reaction equation to find the moles of H2SO4

c = 0.1

H2SO4 + 2KOH --> K2SO4 + 2H2O

Ratio of KOH to H2SO4:

2 : 1 (--> 1 is ½ of 2)

If we have 0.01 moles of KOH therefore:

0.01 : x

x = 0.005 (i.e. ½ of 0.01)

3. Calculate volume of H2SO4

n = V × c

0.005 = V × 0.1

V = 0.005 ÷ 0.1

V = 0.05

This reaction will take 0.05 dm³ of H2SO4, or 50 cm³

Answer the following questions with a true or a false. PLease help me this is due in 5 more minutes

1.Natural hazards cause a range of negative impacts on people including disruptions to daily life, damage to property, economic loss, and injury to people.

2.Natural hazards vary in their severity (the degree to which they have impacts) because of the range of magnitudes that are possible for any natural hazard event.

3.Many natural hazards cause damage to property such as buildings, roads, vehicles, bridges. They cause these damages due to the unbalanced forces that shaking, moving water, and wind place on objects. These forces cause objects to accelerate suddenly and then decelerate suddenly when they collide into objects that are at rest or that are moving in a different direction.

4. The most intense and impactful natural hazard events of the past can help predict the possible intensity and damages of future hazards.

5.It is possible to predict how likely it is that a natural hazard event will occur in the future by examining how often such events have occurred in the past.

6.Patterns in the locations of past events help us forecast future events.

7.In order to make forecasts based only on records of past events, scientists must assume that the conditions that created those hazards in the past will remain the same in the future.

Answers

The answer for all natural hazards statements are 1. True, 2. Ture, 3. True, 4. True, 5. True, 6. True, 7. False.

Describe Natural Hazards?

Natural hazards are natural phenomena that can potentially cause harm or damage to humans, property, or the environment. These hazards are events that are caused by natural processes, such as geological, meteorological, hydrological, or biological processes. Natural hazards can range from relatively minor events, such as a small earthquake or a local flood, to catastrophic events, such as a volcanic eruption, a major earthquake, or a tsunami.

This statement is true. Natural hazards, such as earthquakes, hurricanes, floods, and wildfires, can cause a wide range of negative impacts on people and communities, including disruptions to daily life, damage to property, economic loss, and injury to people.

This statement is true. Natural hazards vary in their severity because they can occur in a range of magnitudes, from mild to extreme. The severity of a natural hazard event depends on various factors, such as the strength and duration of the event, the location and vulnerability of the affected population, and the preparedness and response capacity of the community.

This statement is true. Many natural hazards, such as earthquakes, hurricanes, and tornadoes, cause damage to property by exerting unbalanced forces on objects. These forces can cause objects to accelerate suddenly and then decelerate suddenly when they collide into objects that are at rest or that are moving in a different direction.

This statement is true. Studying the most intense and impactful natural hazard events of the past can help scientists and communities better understand the possible intensity and damages of future hazards. This information can be used to improve preparedness, response, and recovery efforts.

This statement is true. Examining the historical record of natural hazard events can help scientists and communities predict how likely it is that a similar event will occur in the future. This information can be used to assess risk and inform decision-making.

This statement is true. Patterns in the locations, frequency, and intensity of past natural hazard events can help scientists and communities forecast future events. For example, if a certain area has experienced frequent earthquakes in the past, it is more likely to experience earthquakes in the future.

This statement is false. While records of past events can provide valuable information for predicting future hazards, scientists do not assume that the conditions that created those hazards in the past will remain the same in the future. They consider a wide range of factors, such as changes in climate, land use, and population density, that may affect the occurrence and impact of natural hazards.

To know more about hazard  visit:

https://brainly.com/question/28269548

#SPJ1

1. What volume of hydrogen gas at STP is produced from the
reaction of 50.0g of Mg and 75.0 grams of HCl? How much
of the excess reagent is left over (in grams)?

Answers

Answer:

1.03 mol of dihydrogen gas will evolve, with a volume slightly over 22.4 dm3 at ST P. Explanation: Moles of magnesium: 50.0 ⋅ g 24.31 ⋅ g ⋅ mol−1 = 2.06 mol Moles of hydrogen chloride gas: 75.0 ⋅ g 36.2⋅ g ⋅ mol−1 = 2.07 mol

Explanation:

HOPE THAT HELPS ! <3

It is advantageous for a predator to prey exclusively on a single prey species

Answers

Answer: It is not necessarily advantageous for a predator to prey exclusively on a single prey species, as this can limit their options and make them vulnerable if the population of that prey species declines or becomes extinct. Predators that are more flexible and able to switch between different prey species may be better equipped to survive and thrive in changing environments.

However, there are some advantages to specializing in a single prey species. For example, a predator that is well adapted to hunting a particular prey species may be more efficient and successful at capturing and consuming that prey, which could provide a reliable source of energy. Additionally, if the predator and prey have co-evolved, the predator may have adaptations that specifically allow it to exploit the weaknesses or vulnerabilities of its prey, giving it an advantage over predators that are less specialized.

Straw like organ used to intake for and water or dispose of waste

Answers

A tube is the term used to describe the straw-like organ utilized by both plants and animals to consume food and water or to eliminate waste.

What is tube?

A hollow, cylindrical structure that is often present in living things is referred to as a tube. Many biological structures, such as blood veins, intestines, respiratory tracts, and the reproductive system, contain tubes. Many biological functions, including the passage of nutrients, the exchange of gases, and the removal of waste materials, depend on tubes.

These tubes are referred to as xylem and phloem in plants. While the phloem moves sugars and other nutrients from the leaves to other parts of the plant, the xylem is in charge of moving water and minerals from the roots to the rest of the plant.

Animals have many species-specific tube-like organs in charge of intake and waste elimination. Mammals, for instance, have a sophisticated digestive system that consists of the anus, esophagus, stomach, and intestines. Together, these organs help the body digest food, extract nutrients, and get rid of waste.

Generally, tubes or channels are essential for both plant and animal life because they let them take in the substances they need and let waste out.

To know more about tube, visit:

https://brainly.com/question/30271755

#SPJ1

The speed of sound in a solid medium is 15 times greater than that in air. If the frequency of a wave in the solid is 87 KHz, then what is the wavelength? ( The speed of sound in air is 344 m/s.) m

Answers

The wavelength of the sound in the solid medium, given that the speed of the sound in the solid is 15 times greater than that in air is 0.06 m

How do i determine the wavelength?

The wavelength of a wave is defined by the following formular:

Velocity (v) = wavelength (λ) × frequency (f)

v = λf

The following data were obtained from the question:

Speed of sound wave in air (c) of  = 344 m/sSpeed of sound in solid medium (v) = 15 × c = 15 × 344 = 5160 m/sFrequency (f) = 87 KHz = 87 × 1000 = 87000 HzWavelength (λ) = ?

Velocity (v) = wavelength (λ) × frequency (f)

5160 = wavelength × 87000

Divide both sides by 87000

Wavelength = 5160 / 87000

Wavelength = 0.06 m

Therefore, we can conclude that the wavelength is 0.06 m

Learn more about wavelength:

https://brainly.com/question/30859618

#SPJ1

To a beaker weighing 263.2 g, you add 87.10 g of water and 0.549 g of sugar. Determine the combined
mass of the beaker, water and sugar (in grams).

Answers

Answer: 350.849 g

Explanation:

The question is asking the masses of water, sugar, and the beaker to be added together. So, it can be understood that we need to add all of the masses up as follows to get the combined mass:

263.2 g + 87.10 g + 0.549 g = 350.849 g

From this, we can determine that the combined mass of the beaker, water, and sugar (in grams) is 350.849 g.

Consider the following silica gel TLC plate of compounds A, B, and C developed in hexanes:
Consider the following silica gel TLC plate of com
a) Determine the R f values of compounds A, B, and C run on a silica gel TLC plate using hexanes as the solvent
b) Which compound, A, B, or C, is the most polar?
c) What would you expect to happen to the R f values if you used acetone instead of hexanes as the eluting solvent? (Think polarity of solvents)

Answers

The R f values for compounds A, B, and C on a silica gel TLC plate developed in hexanes would be determined by measuring the distance each compound traveled compared to the distance the solvent traveled.

a) There is a 4 cm gap between the origin and the solvent front. The Rf value for spot A is[tex]\frac{1.5}{4}= 0.375[/tex], because it travelled 1.5 cm. Due to the 3.5 cm movement of Spot B, its Rf is[tex]\frac{3.5}{4} = 0.875[/tex]. Spot C shifted 3 cm, making its Rf [tex]\frac{3}{4} = 0.75[/tex].

b)Due to its shorter travel distance than the other two compounds, compound A is the most polar. Recall that polar substances adhere to the adsorbent more readily, move less, and have a lower Rf value.

c)Hexanes is less polar than acetone as a solvent. Each of the three compounds would move more quickly if the same method were employed to elute them.The chemicals can be removed from the polar adsorbent more effectively with a more polar eluting solvent. Each compound would have a higher Rf value if acetone were used to elute the TLC plate as opposed to hexanes because each compound travels more quickly.

learn more about  Rf value Refer:brainly.com/question/17796724

#SPJ1

fill in the blank. the electron transport chain harnesses the potential energy of the molecules___, which donate electrons to proteins in the electron transport chain.

Answers

The electron transport chain harnesses the potential energy of the molecules NADH and FADH2, which donate electrons to proteins in the electron transport chain.

NADH and FADH2 are coenzymes that help transfer electrons from metabolic reactions such as glycolysis, the citric acid cycle, and fatty acid oxidation. The electrons from NADH and FADH2 are passed from one electron carrier to another until they reach the terminal electron acceptor, which is usually oxygen. As the electrons are passed along the electron transport chain, energy is released and used to produce a form of energy that cells can use, called ATP. The energy produced by the electron transport chain is used by cells to do work, such as muscle contraction, active transport, and protein synthesis. The electron transport chain is a vital process that occurs in all cells, and it is responsible for the production of ATP, which is necessary for cells to function properly.

For more such questions on electron transport chain

https://brainly.com/question/876880

#SPJ11

is CF3Cl a polar or non-polar molecule?

Answers

Answer: Polar

Explanation: This is because if you look up the Lewis Dot structure of this specific molecule, it will have some net dipole moment, which makes it polar.

It can be considered that when a molecule does have some net dipole moment, it is polar.

So, yes CF3Cl is polar.

CF₃Cl, also known as chlorotrifluoromethane, is a polar molecule.

To determine the polarity of a molecule, consider the individual bond polarities and the molecular geometry.

In CF₃Cl, there is a difference in electronegativity between carbon (C) and chlorine (Cl), as well as between carbon and fluorine (F). Chlorine and fluorine are more electronegative than carbon, meaning they have a greater ability to attract electrons toward themselves.

The C-Cl bond and the C-F bonds in CF₃Cl are polar bonds due to the electronegativity difference. The Cl and F atoms pull the shared electrons towards themselves, creating partial negative charges on those atoms and partial positive charges on the carbon atom.

To learn more about the polar molecule, follow the link:

https://brainly.com/question/1946554

#SPJ6

Let's put this knowledge to the test! How many atoms are in 14 moles of cadmium? Remember that 1 mole would contain 6.02214 x 1023 atoms of cadmium.

Answers

Atoms in 14 moles of cadmium are  84.3 × 10²³ atoms .This is taken out by mole concept via Avogadro number .

What is Avogadro number ?

The Avogadro constant, also known as NA or L, is a proportionality factor that relates the number of constituent particles (typically molecules, atoms, or ions) in a sample to the amount of substance in that sample. It is a SI defining constant with the exact value of 6.02214076×10²³.  Stanislao Cannizzaro named it after the Italian scientist Amedeo Avogadro, who explained it four years after Avogadro's death at the Karlsruhe Congress in 1860.

to know more about Avogadro number , visit ;

brainly.com/question/11907018

#SPJ1

please answer the question for BRAINLIEST asap

Using the formula M1V1 = M2V2 , if I add water to 100.0 mL of a 0.15 M NaOH solution until the final volume is 150 mL, what will the molarity of the diluted solution be?
Question 3 options:

0.23M


1.0M


0.10M


1.0E5M

Answers

Answer:

M2= 0,1 M

Explanation:

M1=0,15 M

V1= 100 mL =0,1 L

M2= ?

V2= 150 mL = 0,15 L

M1V1= M2V2

(0,15 mol/L) (0,1 L) = M2 (0,15 L)

0,015 mol / 0,15 L = M2

M2= 0,1 M

Please help me thank you

Answers

The equilibrium constant for the reaction at 25 °C is 4.749.

ΔG for the reaction at body temperature is -4.899 kJ/mol.

How ot calculate equilibrium constant and change in free energy?

The standard free energy change (ΔG°) of the reaction is given as -3.860 kJ/mol.

At 25°C, the equilibrium constant (K'eq) can be calculated using the following equation:

ΔG° = -RTlnK'eq

where R is the gas constant (8.314 J/molK) and T is the temperature in Kelvin (25°C = 298 K).

Converting the given units of ΔG° to joules/mol:

ΔG° = -3.860 kJ/mol = -3.860 × 10³ J/mol

Substituting the values in the equation:

-3.860 × 10³ J/mol = -(8.314 J/molK) × 298 K × lnK'eq

Solving for K'eq:

lnK'eq = 14.678

K'eq = e^(14.678) = 4.749 (rounded to three significant figures)

At 37.0°C, the ΔG for the reaction can be calculated using the following equation:

ΔG = ΔG° + RTln(Q)

where R is the gas constant (8.314 J/molK), T is the temperature in Kelvin (37.0°C = 310 K), and Q is the reaction quotient.

Q = [B]/[A] = 0.45/1.7 = 0.265

Substituting the values in the equation:

ΔG = -3.860 × 10³ J/mol + (8.314 J/molK) × 310 K × ln(0.265)

ΔG = -4.899 kJ/mol (rounded to three significant figures)

Learn more on general reactions here: https://brainly.com/question/12049042

#SPJ1

The question is:

Consider a general reaction

    enzyme

A(aq) ⇔ B(aq)

The AG of the reaction is -3.860 kJ mol-1. Calculate the equilibrium constant for the reaction at 25 °C.

K'eq =_________

What is ΔG for the reaction at body temperature (37.0 °C) if the concentration of A is 1.7 M and the concentration of B is

0.45 M?

ΔG= ______ kJ mol-1

Given that 4 NH3 + 5 O2 → 4 NO + 6 H2O, if 3.00 mol NH3 were made to react with excess of oxygen gas, the amount of H2O formed would be

Answers

Answer:

x mol H2O = 4.50 mol H2O

Step-by-step explanation:

From the balanced equation, we can see that for every 4 moles of NH3 that react, 6 moles of H2O are formed. Therefore, we can use a proportion to find the amount of H2O that would be formed if 3.00 mol of NH3 reacted:

4 mol NH3 : 6 mol H2O = 3.00 mol NH3 : x mol H2O

Solving for x, we get:

x mol H2O = (6 mol H2O / 4 mol NH3) * 3.00 mol NH3
x mol H2O = 4.50 mol H2O

Therefore, if 3.00 mol of NH3 were made to react with excess oxygen gas, 4.50 mol of H2O would be formed.

According to the balanced equation, what is the theoretical mole ratio of baking soda to sodium chloride?

NaHCO3 + HCl = NaCl + CO2 + H2O

Answers

Answer:

Explanation:

1;1 since you do not need coefficients to balance the equation

Which transition metal can form both a high and low spin complex? Zn2+, Cu2+, Mn3+, Ti2+

Answers

Answer: Manganese

Explanation:

With titanium, it only has two d electrons, so it can't form different high and low spin complexes. It doesn't matter because it will never fill the higher-energy orbitals. The total spin state turns out to be +1 (two unpaired d electrons, no matter what). Therefore, manganese will form both a high and low spin complex.

Calculate number of atoms in 30g Na

Answers

Answer:

The molar mass of Na is 22.99 g/mol (rounded to two decimal places).

To calculate the number of atoms in 30 g Na, we first need to convert the mass to moles using the molar mass:

moles of Na = 30 g / 22.99 g/mol = 1.304 mol (rounded to three decimal places)

Next, we can use Avogadro's number, which tells us the number of particles (atoms, molecules, etc.) in one mole of a substance. Avogadro's number is approximately 6.02 x 10^23 particles per mole.

So, to find the number of atoms in 1.304 moles of Na:

number of atoms = 1.304 mol x (6.02 x 10^23 atoms/mol) = 7.854 x 10^23 atoms

Therefore, there are approximately 7.854 x 10^23 atoms in 30 g Na.

Identify the strongest acid


Select one:

a. H2O

b. H2Se

c. H2S

d. H2Te

Answers

Answer:

H2Te

Explanation:

Hydrogen telluride is the strongest acid among the options above.

match the problems that arise when a particular situation is present when running a spectrum of a neat liquid:

Answers

The problem that arises when running a spectrum of a neat liquid is that it can be difficult to distinguish the peaks in the spectrum due to the broadening of the baseline.

This is because the baseline broadening is caused by the interaction of the solvent molecules with the solute molecules, which is difficult to avoid. To reduce the baseline broadening, it is necessary to reduce the solvent concentration or use a denser solvent. In addition, it is also important to ensure that the sample is well-mixed, since inhomogeneity in the sample can lead to peak broadening. It is also important to reduce noise in the spectra, since this can lead to peak broadening or obscuring of the peaks. Finally, it is important to carefully choose the range of wavelengths to be measured, since if the range is too wide, then the baseline broadening may obscure the peaks.

In conclusion, the problems that arise when running a spectrum of a neat liquid include baseline broadening, inhomogeneity in the sample, noise in the spectra, and a too wide range of wavelengths being measured. To reduce these issues, it is important to reduce the solvent concentration or use a denser solvent, ensure that the sample is well-mixed, reduce noise in the spectra, and carefully choose the range of wavelengths to be measured.

For more such questions on spectrum

https://brainly.com/question/14783701

#SPJ11

The chemical potential energy of bond A is greater than the chemical potential energy of bond B. Which statement best explains this observation?(1 point)a-The atoms in bond A are larger than the atoms in bond B.b-The atoms in bond A have fewer bonds between them than the atoms in bond B.c-The atoms in bond A are held more tightly together than the atoms in bond B.d-The atoms in bond A are farther apart than the atoms in bond B.

Answers

If the chemical potential energy of bond A is greater than the chemical potential energy of bond B, then this means that atoms in bond A are held more tightly together than the atoms in bond B. So option c. is correct.

What is chemical potential energy?

Chemical potential energy is the energy stored in the chemical bonds of matter. These reactions involve breaking chemical bonds between molecules and reforming them into new configurations. Excess energy is released and released as heat or work.

Dynamite is a good example of chemical potential energy. The main component of dynamite is nitroglycerin, a highly unstable substance. Mixing it with diatomaceous earth increases its stability and makes it less likely to explode when subjected to physical impact. When ignited, nitroglycerin explodes rapidly, releasing large amounts of nitrogen and other gases along with enormous amounts of heat.  

To know more about chemical bonds, visit:

https://brainly.com/question/12907148

#SPJ1

The complete question is as follows:

The chemical potential energy of bond A is greater than the chemical potential energy of bond B. Which statement best explains this observation?(1 point)

a-The atoms in bond A are larger than the atoms in bond B.

b-The atoms in bond A have fewer bonds between them than the atoms in bond B.

c-The atoms in bond A are held more tightly together than the atoms in bond B.

d-The atoms in bond A are farther apart than the atoms in bond B.

If 25 grams of sugar dissolves into 150 grams of water, what is the new weight of the liquid?

Answers

Answer:

175 grams

Explanation:

25+150=175

175 grams

The alkanes will react with halogens in photochemical reactions to produce haloalkanes.

1. What is a photochemical reaction?

2.Use the formation of chloromethane from methane and chlorine in the presence of UV light, to
explain the three stages involved in these photochemical reactions.

3.Give the equation for the overall reaction.

Answers

Answer:

Explanation:

A photochemical reaction is a chemical reaction that occurs due to the absorption of light energy. These reactions typically require high-energy radiation, such as ultraviolet or visible light, to initiate the reaction.

The three stages involved in the photochemical reaction between methane and chlorine to form chloromethane are:

i) Initiation: Chlorine molecules absorb high-energy UV radiation, which causes the chlorine bond to break homolytically, producing two chlorine radicals. This process requires energy and is endothermic.

Cl2 + energy (UV) → 2Cl•

ii) Propagation: The chlorine radical attacks a methane molecule, breaking the C-H bond and producing a methyl radical and HCl. The methyl radical then reacts with another chlorine molecule, producing another chlorine radical and chloromethane. The chlorine radical then continues to react with more methane molecules, propagating the reaction.

Cl• + CH4 → •CH3 + HCl

•CH3 + Cl2 → CH3Cl + Cl•

iii) Termination: In the termination stage, radicals combine to form products, which stops the propagation of the reaction. For example, two methyl radicals can combine to form ethane, or a chlorine radical and a methyl radical can combine to form methyl chloride.

•CH3 + •CH3 → C2H6

•CH3 + Cl• → CH3Cl

The overall reaction for the formation of chloromethane from methane and chlorine in the presence of UV light is:

CH4 + Cl2 + UV light → CH3Cl + HCl

Given the equilibrium constants for the equilibria, 2NH4+(aq) + 2H2O(l) <-->2NH3(aq) + 2H3O+(aq); Kc = 3.24 x 10^-19 CH3COOH(aq) + H2O(l) <--> CH3COOH (aq) + H3O+(aq); Kc = 1.75 x 10^-5 determine Kc for the following equilibrium. CH3COOH(aq) + NH3(aq) --> CH3COOH (aq) + NH4+(aq)

Answers

Given the equilibrium constants for the equilibria, Kc for the following

equilibrium is 3.06 × 10⁴

What is equilibrium constant ?

A chemical reaction's equilibrium constant is the value of its reaction quotient at chemical equilibrium, a state attained by a dynamic chemical system after a sufficient amount of time has passed in which its composition has no measurable tendency to change further. The equilibrium constant is independent of the initial analytical concentrations of the reactant and product species in the mixture for a given set of reaction conditions. As a result, given the initial composition of a system, known equilibrium constant values can be used to determine the system's composition at equilibrium. Temperature, solvent, and ionic strength, for example, can all influence the value of the equilibrium constant.

to know more about equilibrium constant , visit ;

brainly.com/question/29129401

#SPJ1

THEORY 1. illustrate the formation of the Compound AIC 13 Electron dot representation. ​

Answers

The electron representation shows the electrons in the atoms as dots as in the image attached.

What is electron dot representation?

An electron dot representation, also known as a Lewis dot structure or electron dot diagram, is a way of representing the valence electrons of an atom using dots around the symbol of the element.

Valence electrons are the outermost electrons of an atom, and they play an important role in chemical bonding. The electron dot representation shows the valence electrons as dots around the symbol of the element, with each dot representing one valence electron.

Learn more about electron dot:https://brainly.com/question/25929171

#SPJ1

There are 7.68 × 1025 atoms of phosphorous in how many moles of diphosphorous pentoxide?

Answers

Answer:

7.68 x 1025 atoms of phosphorous correspond to 1.06 mole of diphosphorous pentoxide. This can also be written as 1.06 mol of P2O5.

Dissolving 7.51 g of CaCl2 in enough water to make 332 mL of solution causes the temperature of the solution to increase by 3.25 oC. Assume the specific heat of the solution and density of the solution are the same as water′s (about 4.18 J/goC and 1.00 g/cm3, respectively) Calculate ΔH per mole of CaCl2 (in kJ) for the reaction under the above conditions.

Answers

Answer:

65.72 kJ/mol

Explanation:

The temperature change, ΔT, can be used to calculate the amount of heat absorbed by the solution:

q = CmΔT

where q is the heat absorbed, C is the specific heat capacity of water (4.18 J/goC), m is the mass of the solution, and ΔT is the temperature change.

The mass of the solution can be calculated using its density:

m = Vd

where V is the volume of the solution (332 mL = 0.332 L), and d is the density of water (1.00 g/cm3).

m = 0.332 L x 1.00 g/cm3 = 332 g

The amount of heat absorbed, q, can now be calculated:

q = CmΔT = (4.18 J/goC) x (332 g) x (3.25 oC) = 4447 J

This amount of heat is absorbed by the dissolution of 7.51 g of CaCl2. To calculate the enthalpy change per mole of CaCl2, we need to convert grams to moles:

moles of CaCl2 = 7.51 g / 110.98 g/mol = 0.0676 mol

Therefore, the enthalpy change per mole of CaCl2 is:

ΔH/mol = q / moles of CaCl2 = 4447 J / 0.0676 mol = 65720 J/mol = 65.72 kJ/mol

So the enthalpy change per mole of CaCl2 is 65.72 kJ/mol.

how many moles of CaO will form if 10.0 moles of CO2 are produced

Answers

The balanced chemical equation for the reaction that forms CaO and CO2 is:

CaCO3(s) → CaO(s) + CO2(g)

According to the equation, 1 mole of CaCO3 produces 1 mole of CaO and 1 mole of CO2.

Therefore, if 10.0 moles of CO2 are produced, it means that 10.0 moles of CaO are also produced since the reaction stoichiometry is 1:1.

So the answer is 10.0 moles of CaO.

FILL IN THE BLANK.If a neutral acid donates a proton, the conjugate base will have a charge of _______. - Type both an integer and a sign for your answer.

Answers

The conjugate base of a neutral acid that donates a proton will have a charge of -1.

When a neutral acid donates a proton, it is undergoing a process called deprotonation, meaning it has lost a proton from its molecular structure. In this reaction, the neutral acid becomes an anion (negatively charged ion) and the proton is picked up by the base, which is then referred to as the conjugate base of the acid. The conjugate base will have a charge of -1 because it now has one extra electron relative to the original neutral acid.
To illustrate this reaction, consider acetic acid (CH3COOH) donating a proton to a base. When the acid donates a proton, it becomes an anion, CH3COO-, and the base, which has gained a proton, is the conjugate base and has a charge of -1.
In summary, when a neutral acid donates a proton, the conjugate base will have a charge of -1.

For more such questions on acids

https://brainly.com/question/25148363

#SPJ11

Each of the properties that follow is a characteristics of the carbon atom. in each case, indicate how the property contributes to the role of the carbon atom as the most important atom in biological molecules.
a. the carbon atom has a valence of four.
b. the carbon-carbon bond has a bond energy that is above the energy of photons of light in the visible range(400-700)
c. carbon is one of the lightest elements to form a covalent bond.
d. carbon can form single, double and triple bonds.
e. the carbon atom is a tetrahedral structure.

Answers

Carbon's unique properties such as having a valence of four, the ability to form various types of bonds including double and triple bonds, and its tetrahedral structure.

What are the properties of carbon bonds?

a. The carbon atom's valence of four enables it to form up to four covalent bonds with other atoms, allowing for the formation of diverse organic molecules. This property makes carbon the backbone of many biological molecules, including carbohydrates, lipids, proteins, and nucleic acids.

b. The high bond energy of carbon-carbon bonds makes them stable and resistant to breaking under normal physiological conditions, contributing to the stability of biological molecules. This property allows for the formation of complex macromolecules, such as enzymes and DNA, which are essential to life.

c. Carbon's relatively low atomic weight allows it to form strong covalent bonds without adding significant mass to the molecule. This property is essential for the formation of large and complex biological molecules, which require many carbon atoms to function properly.

d. The ability of carbon to form single, double, and triple bonds allows for the formation of diverse molecular structures, including cyclic structures and branching chains. This property contributes to the diversity of organic molecules found in living organisms, allowing for the creation of molecules with specific functions.

e. The tetrahedral structure of the carbon atom enables it to form strong and stable bonds with other atoms while maintaining a relatively stable geometry. This property is essential for the formation of complex three-dimensional structures in proteins and other biological molecules, allowing them to perform specific functions within cells.

Learn more about carbon bond here: https://brainly.com/question/12156863

#SPJ1

Other Questions
The profit (in thousands of dollars) from the expenditure of x thousand dollars on advertising is given by P(x)=1000+32x-2x2. Find the marginal profit at the following expenditures. the city cafe is known for their vegetable plate lunch special that comes with four vegetables, cornbread, and sweet tea. if the four vegetables can be selected from a list of ten vegetables, what formula should be used to determine how many different vegetable plates are there? assume no vegetable is selected more than once running water dissolves soluble minerals. this material is most likely to be transported by a stream as My friend wants to go on his own 5 day vacation without his parents knowing. What lie or excuse would be excellentl to make? Wong took a test assessing his editing skills as part of the interview process for an executive assistant position. Depending on Wongs score, the recruiter can assume how successful be will be in the job, based on ________ validity. A. content B. predictive C. concurrent D. subjective E. logical Anita borrowed 6000 from a bank at 15% interest rate per annum. Find the interest andamount to be paid at the end of 3 years. put these in order english colonies settle in jamestown, europeans explore the americas, the french and indian war ends, the colonies become a free country, the revolutionary war begins, only indians lived in North Americans As a Caregiver, how will you prevent the spread of infection to your patient, client and the community enzymes with their highest activity at an alkaline (basic) ph are represented by which of the following graphs? Division is repeated _________ of the same numbers there is very little hydrogen or helium in the inner part of the solar system today. astronomers believe the reason for this is that An object is 15 cm in front of a diverging lens with a focal length of 10 cm.Part AUse ray tracing to determine the location of the image.Express your answer using two significant figures.q =Part BIs the image upright or inverted?Part CIs the image real or virtual? you are tasked with setting up a server for your company. explain how you would arrange the storage so that you meet the specifications set by your boss that no data can be lost, due to failed hard drive, etc. PLEASE HELP ME!!! Type the correct answer in each box. Use T for true and F for false.Complete the truth table for the contrapositive of a conditional statement.TTLLLLqTFTLLPqTFTT~9~p 25 POINTS1. Explain the process of verifying a trigonometric identity. 2. What is a similarity and difference between verifying a trigonometric identity and solving an equation? 3. How do you find the value of cos120 using the sum or difference formula? 4. How do you decide whether to use a positive or negative sign in the half- angle formula for sine and cosine? 5. When solving a trigonometric equation, what is the difference between finding all solutions and finding all solutions within a specific interval? Can someone check my answers? If Im incorrect can you correct me? Thank you. Image below. OBFW PublishersJoy Milne of Perth, UK, smelled a "subtle musky odor" on her husband Les that she had never smelled before. At first, Joythought maybe the smell was from Les's sweat after long hours of work. But when Les was diagnosed with Parkinson's 6 yearslater, Joy suspected the odor might be a result of the disease. Scientists were intrigued by Joy's claim and designed anexperiment to test her ability to "smell Parkinson's." Joy was presented with 12 shirts, each worn by a different person, some ofwhom had Parkinson's and some of whom did not. The shirts were given to Joy in random order, and she had to decide whethereach shirt was worn by a Parkinson's patient or not. Joy identified 11 of the 12 shirts correctly. If we assume that Joy was justguessing, she would have probability 1/2 of correctly identifying each shirt.(a) Find the probability that Joy would identify at least 11 shirts correctly by random guessing.Round your answer to 4 decimal places.Leave your answer in decimal form.about uscareers Refer to your Baseball Saved Us book for a complete version of this text. What is a theme of Baseball Saved Us? O A balanced life includes equal parts of work and play. One can turn negative emotions into positive actions. One can learn a lot from the experiences of others. Strong emotions most often result in dreadful behavior. Use the slope and y-intercept to identify the equation of this line. What are 2 reasons plastic straws should be banned