Neglecting air resistance the direction of acceleration of a rock thrown straight upward is upward.
The acceleration of the rock as it is rising is upward. This is due to the force of gravity acting on the rock, which is constantly pulling it down toward the ground. As the rock moves upward, the force of gravity is still pulling it down, so the acceleration of the rock is also in the downward direction. However, since the rock is moving upwards, the acceleration is in the opposite direction of the force of gravity, so the acceleration of the rock is actually upward.
To know more about acceleration please refer:
https://brainly.com/question/2303856
#SPJ4
Which of the following do you see moving with constant velocity? (There may be more than one correct answer.) A. A person riding on a Ferris wheel that is turning at a constant rate B. A can of soda sitting on a table C. A tennis ball traveling across the court after having been hit by a tennis racket D. A ship sailing northeast at a speed of 5 meters per second
E. The Moon orbiting the Earth
The options 1 and 4 are correct given that the concept of constant velocity applies to their situation where, and object moves in a constant speed and direction.
What is velocity?
Velocity is the directional speed of an object in motion as an indication of its rate of change of position, as observed from a specific frame of reference and as measured by a specific time standard (e.g. 60 km/h heading north). Velocity is a fundamental concept in kinematics, the branch of classical mechanics that describes the motion of bodies.To know more about velocity, click the link given below:
https://brainly.com/question/18084516
#SPJ4
A stone is tossed vertically upward with an initial velocity of 25 ft/s from the top of a 30-ft building.(a)What is the height of the stone after 0.25 s
Answer:
H = V0 t - 1/2 g t^2 height (from top of building) after t sec
H = 25 * .25 - 9.8 / 2 * .25^2 = 5.94 m
H = 6 m after .25 sec and the total height is 36 m
h =36 m above ground
The elevation of the stone following 0.25 seconds is 36 meters above the ground, as shown by the question.
We estimate beginning velocity because...To separate the enzyme's impact from the uncatalyzed action. Since enzymes are permanently destroyed throughout catalysis, it is necessary to determine the reaction's rate with a known [E]T. to calculate the reaction's speed using a given [S] before it starts to alter noticeably over time.
H = V0 t - 1/2 g t^2 height (from top of building) after t sec
H = 25 * .25 - 9.8 / 2 * .25^2 = 5.94 m
H = 6 m after .25 sec and the total height is 36 m
h =36 m above ground
To know more about initial velocity visit:
https://brainly.com/question/28395671
#SPJ4
if the vector sum and the magnitudes of the vectors when added is given by a b = c, then the vectors and must have their orientation
The direction of the electric field at point "A" is from left to right and the direction of the electric field at point "B" is from right to left. The direction of the electric field at point "C" is downward.
The electric field is a field that describes the force experienced by a charged particle due to the presence of other charged particles or electric charges. The electric field is a fundamental concept in electromagnetism and is used to understand and predict the behavior of charged particles in various situations.
Electric field lines are used to represent the direction of the electric field. They are lines that start from positive charges and end at negative charges. The direction of the electric field at any given point is the direction in which a positive test charge would be pushed if placed in the field. The closer the electric field lines are together, the stronger the electric field is in that region.
The electric field can be caused by a variety of sources, including point charges, distributed charges, and electric dipoles. The electric field can also be influenced by other factors such as conductors, insulators, and dielectrics.
To learn more about electric field please click on below link.
https://brainly.com/question/26446532
#SPJ4
You hit a ball with a bat that delivers 100 N of force. Which of the following scenerios will give the ball the greatest speed.
Time doesnt matteronly the force does.
Try to apply the 100 N force for 0.01 s.
Try to apply the 100 N force for 0.1 s
Try to apply the 100 N force for 0.2 s.
None of these
Answer:
Try to apply the 100 N for 0.2 s.
A Heater Is Rated At 1200 W. How Much Current I Does It Draw When It Is Connected To A 120-V Voltage Source?
Current it draws when it is connected to a 120-V Voltage Source is calculated as 10A.
What is meant by power?Electric power (P) of any appliance is defined as the product of the voltage applied on it (V) and the current that flows in it (I).
The rate at which work is done or energy is transferred in an electrical circuit is called electric power or we can also say that it is a measure of how much energy is used in a span of time.
Therefore, P=I*V.
We need to calculate the current and we have the power and the voltage.
Given a heater rated at 1200 W and connected to 120 V voltage source will draw a current of 1200 W / 120 V = 10 A.
To know more about electric power, refer
https://brainly.com/question/29199566
#SPJ4
A uniform beam xy is 100 cm long and weighs 4. 0 n. The beam rests on a pivot 60 cm from end x. A load of 8. 0 n hangs from the beam 10 cm from end x. The beam is kept balanced by a force f acting on the beam 80 cm from end x. What is the magnitude of force f?.
To keep the balance the beam's required magnitude of force f will be 22 N.
Given,
Length of the beam, xy = 100cm
Pivoted at 60 cm from end x
Weight force at 50 cm from x, W = 4 N
force due to hanging mass, F = 8 N 10 cm from x
and f at 80 cm at x.
Now, let the direction of force f is downward
so we have to balance the moment due to all the forces about the pivot,
So the total clockwise moment
= fx(80-60) = 20f Ncm
And anti-clockwise moment
= Wx(60-50) + F(60-10) = 4x10+8x50 = 440 Ncm
Now anticlockwise moment = Clockwise moment
or 20f = 440
or f = 22 N
Therefore, To keep the balance the beam's required magnitude of force f will be 22 N.
To learn more about the moment:
https://brainly.com/question/14327819
#SPJ4
which of the following statements is not one of newton's laws of motion? group of answer choices in the absence of a net force, an object moves with constant velocity. for any force, there always is an equal and opposite reaction force. what goes up must come down. all of the above are newton's laws of motion. the rate of change of momentum of an object is equal to the net force applied to the object.
"What goes up must come down." is not newton's law. Option C is the correct option.
What is laws?
Laws of Physics are by definition stated facts that have been derived and inferred from empirical observations. Simply put, physical laws are a way to categorize how the world behaves and interacts with us.
Newton's laws are:
First law:
Unless a force acts upon a body that is at rest or moving in a straight line at a constant speed, it will continue to be at rest or move in that direction.
Second law:
A numerical description of the modifications to a body's motion that a force can cause. According to this, a body's momentum changes at a rate that is equal to the force acting on it over time in both magnitude and direction.
Third law:
When two bodies come into contact, they exert forces on one another that are both equal in strength and directed in opposing directions.
To learn more about Newton's laws, click on the below link:
https://brainly.com/question/29266206
#SPJ4
What is the electric field at the center of square when three sides of square have a charge of 4 columb?
The electric field at the center of the square when three sides of square have a charge of 4 coulomb will be zero.
This is because the electric fields from each side of the square will cancel each other out. The electric field of a single side of the square is given by the equation E = q/4πεr, where q is the charge, ε is the permittivity of free space, and r is the distance from the center of the square. Since the distances from the center of the square to the sides are all equal, the electric fields from the sides will be equal in magnitude and opposite in direction, meaning that the net electric field at the center of the square will be zero.
To know more about electric fields please refer:
https://brainly.com/question/8971780
#SPJ4
What is the equilibrant force for 53 newtons, W: 28 newtons, S:12
newtons, N; 24 newtons, E?
The equilibrant force is 45 N, acting in the direction opposite to the net force.
What is meant by equilibrant force?The equilibrant force is the force that is required to balance all other forces acting on an object in a specific situation. To find the equilibrant force for the given forces, you need to determine the net force acting on the object.
The net force can be found by adding the individual forces acting on the object:
Net force = 53 N + 28 N - 12 N - 24 N = 45 N
Equilibrant force = - 45 N = 45 N, acting in the opposite direction of the net force.
In this case, the equilibrant force is 45 N, acting in the direction opposite to the net force.
To know more about equilibrant force, refer
https://brainly.com/question/8045102
#SPJ1
Please answer this by 8!! Thank you so much!!
Answer:
A
Explanation:
because i just knowg a hdduehdudhdreheiei
A speed versus time graph is shown:
Which statement accurately describes the motion of the object in the graph above?
Group of answer choices
From 2s to 6s, the object is at rest.
From 0s to 4s, the object is moving at 1.5 cm/s.
From 6s to 7s, the object speeds up.
From 2s to 6s, the object is moving at 1.5 cm/s.
The statement accurately describes the motion of the object in the graph above is from 2s to 6s, the object is moving at 1.5 cm/s.
option D is the correct answer
What is speed time graph?
A speed time graph is a graph that shows the motion of an object against time. They can also be referred to as velocity-time graphs.
The motion of the object in the graph above can be described as follows;
between 0 to 2 seconds, the speed of the object = 0 cm/s
between 2 to 6 seconds, the speed of the object = 1.5 cm/s
between 6 to 8 seconds, the speed of the object = 0 cm/s
Learn more about speed - time graph here: https://brainly.com/question/30015054
#SPJ1
What is the correct way to report the length of the rectangle in centimeters? Select one: 15.60 cm 15.6 cm 15.600 cm 16 cM
The correct way to report the length of the rectangle in centimeters is 15.60 cm.
What do you mean by significant figures ?The number that is given as digits is established using significant figures. A meaningful representation of numbers is carried by these digits. Frequently, significant digits are employed in place of figures.
By counting all of the values beginning with the first non-zero digit on the left, we may determine the number of significant digits. 12.45, for instance, has four significant digits.
The act of determining an object's length in some standard or non-standard units is known as length measurement. In our daily lives, the ability to measure length is crucial.
Therefore, The correct way to report the length of the rectangle in centimeters is 15.60 cm.
To know more about significant figures refer to:
https://brainly.com/question/24491627
#SPJ4
A low-carbon steel tensile specimen with starting gage length = 2. 0 in and cross sectional area = 0. 5 in2 reaches a maximum load of 20,000 lb. Its elongation at this point is 25%. Determine (a) tensile strength, (b) engineering strain, (c) true stress, and (d) true strain at this maximum load
(a) Tensile strength can be calculated using the formula:
Tensile strength = Maximum load / Cross-sectional area
Tensile strength = 20,000 lb / 0.5 in2 = 40,000 psi
(b) Engineering strain can be calculated using the formula:
Engineering strain = (Change in length) / (Initial length)
Engineering strain = (0.25 * 2.0 in) / 2.0 in = 0.25
(c) True stress can be calculated using the formula:
True stress = Maximum load / Original cross-sectional area
True stress = 20,000 lb / (0.5 in2 * (1 + 0.25)) = 26,666 psi
(d) True strain can be calculated using the formula:
True strain = ln (1 + Engineering strain)
True strain = ln (1 + 0.25) = 0.2586
Find more about Tensile
brainly.com/question/14313776
#SPJ4
a mobile robot is facing y direction. where b =20cm is the distance along the axle between the centers of the t wo wheels. r1 and r2 are the diameters of the two wheels. w l and wr are
w1 and wr are the angular velocities will be the correct answer .
What is Distance ?
Distance is a scalar quantity that describes the amount of space between two points. It is usually measured in units of length, such as meters, kilometers, or miles. Distance can be calculated as the magnitude of the displacement vector, which is the difference between the initial and final positions of an object.
In physics, distance can be used to describe the length of a physical object, the distance between two points in space, or the length of a path taken by an object. In mathematics, the concept of distance is often used in geometry and can refer to the length of a line segment, the shortest distance between two points, or the distance between two shapes.
To know more about Distance , click the given link below ;
https://brainly.com/question/26046491
#SPJ1
if a star of mass 2 solar masses has a planet with a period of 2 years, then what is the planet's separation (distance) from the star?
If a star of mass 2 solar masses has a planet with a period of 2 years, then 2AU is the planet's separation (distance) from the star.
What is the harmonic third law of Kepler?The orbital period of a planet—the amount of time it takes for one orbit to complete—relates to its mean distance from the Sun according to Kepler's third law, often known as the Harmonic Law. The closest planets have the fastest speeds and the shortest orbital periods, according to this law. History. In 1609, Kepler published his first two planetary motion laws, which he had discovered by examining Tycho Brahe's astronomical data. In 1619, Kepler's third law was made public.
we have Keplers third law of planetry motions as
[tex]p^{2}=a^{3}/(M_{s}+M_{p})[/tex]
where
p= period
a= distance in AU
Ms= mass of star
Mp=mass of planet
we will assume
Ms + Mp = Ms
(As mas of planet is very small compare to star)
Now,
2² x 2 = a³
a = 2 AU
Learn more about the Keplers third law here: https://brainly.com/question/1832388
#SPJ4
four or fewer luminaire conductors, smaller than awg, and/or small equipment grounding conductors that originate in the luminaire and terminate in the box, need not be counted when calculating box fill. a. 8 b. 10 c. 12 d. 14
Option a. 8 is the correct answer because Four or fewer luminaire conductors, smaller than AWG size, and small EGCs.
It's essential to guarantee that crates or nooks that contain electrical associations have sufficient space to oblige the transmitters and hardware establishing conveyors (EGCs) without surpassing the case fill limits determined by the Public Electrical Code (NEC).
As per the NEC, four or less luminaire channels, less than American Wire Check (AWG) size, and additionally little EGCs that start in the luminaire and end in the container need not be counted while computing box fill.
This standard is intended to give a specific level of adaptability and diminish the intricacy of box fill estimations, particularly in lighting establishments where luminaire guides and little EGCs are usually utilized. Notwithstanding, it's vital to take note of that this avoidance just applies to the guides and EGCs referenced, and different guides and fittings that consume space inside the container actually should be thought about while computing box fill.
To learn more about electricity and magnetism, refer:
https://brainly.com/question/24309468
#SPJ4
An electron is ejected horizontally, with a speed of 1. 5 x 10^6 m/s, from the electron gun of a tv set. If the viewing screen is 35 cm away from the end of the gun, how far will the electron fall or travel in the vertical direction before hitting the screen?.
The electron's motion can be described as a combination of constant-speed horizontal motion and gravity-influenced vertical motion. The vertical motion can be described using the following equation:
y = v₀t + (1/2)gt²
where y represents vertical displacement, v0 represents initial vertical velocity (0 m/s), t represents the time elapsed, g represents gravity's acceleration (9.8 m/s²), and t represents the time elapsed.
Because the electron moves horizontally at a constant speed, its horizontal distance can be expressed as:
x = vt
where v denotes horizontal velocity (1.5 x 10(6) m/s).
We can use the relationship between horizontal and vertical distances to calculate the time elapsed:
35 cm = 0.35 m x = vt
t = x / v
Plugging in the values:
t = 0.35 m / (1.5 x 10⁶ m/s)
Substituting the time elapsed into the equation for the vertical displacement:
y = v₀t + (1/2)gt²
y = 0 m/s + (1/2)(9.8 m/s²)(t²)
So the electron will fall a distance of y in the vertical direction before hitting the screen.
To Learn More About Distance Click
https://brainly.com/question/15172156
#SPJ4
The accelerations possible for a ball on an incline plane
A. Range from g to infinity
B. Have no limit
C. Range for 0 to g
A ball on an inclined plane (C) can accelerate at speeds between 0 and g.
An inclined plane, also referred to as a ramp, is a flat supporting surface that is tilted at an angle and has one end that is higher than the other.
One of the six simple machines, the inclined plane helps raise or lower a load. The unbalanced force causes objects placed on an inclined plane to accelerate.
In an inclined plane, the normal force does not act in the way that we are used to. Up until this point, normal force has always been seen to be directed upward, counter to the pull of gravity.
The truth is that normal forces are not always upward.
To know more about acceleration visit:
brainly.com/question/20798516
#SPJ4
a centripetal force of 155 n acts on a 1,500-kg satellite moving with a speed of 5,300 m/s in a circular orbit around a planet. what is the radius of its orbit?
A centripetal force of 155 n acts on a 1,500-kg satellite moving with a speed of 5,300 m/s in a circular orbit around a planet. The radius of its orbit is 1.35 x [tex]10^{7}[/tex] meters.
The radius of a satellite's orbit can be calculated using the equation for centripetal force:
F = m * [tex]v^{2}[/tex]/ r
Where,
m = the mass of the satellite
v = its speed
r = the radius of its orbit.
Rearranging the equation and plugging in the given values:
r = m * [tex]v^{2}[/tex] / F = (1500 kg) * [tex](5300 m/s)^{2}[/tex] / (155 N)
r = approximately 1.35 x [tex]10^{7}[/tex] meters.
So the radius of the satellite's orbit is approximately 1.35 x [tex]10^{7}[/tex] meters.
Here you can learn more about centripetal force
brainly.com/question/14249440
#SPJ4
charge q1 = 3.00 nc is at x1 = 0 and charge q2 = 7.50 nc is at x2 = 4.00 m. at what point between the two charges is the electric field equal to zero
The point between the two charges where the electric field equal to zero is calculated to be 1.55 m.
The charge q₁ is given as 3 nc = 3 × 10⁻⁹ c
It is located at x₁ = 0.
The charge q₂ is given as 7.5 nc = 7.5 × 10⁻⁹ c
It is located at x₂ = 4 m.
Let us suppose that, electric field is zero at the point x, it is in between 0 and 4 m.
We know the formula for electric field as,
E = k q /r²
Let us equate the electric field at both the charges.
k q₁/x² = k q₂/(x₂ - x)²
q₁ (x₂ - x)² = q₂ x²
3 × 10⁻⁹× (4 - x)² = 7.5 × 10⁻⁹ × x²
3 × ( 16 + x² - 8x) = 7.5 ×x²
48 + 3x² - 24x = 7.5x²
4.5 x² + 24x - 48 = 0
The two values of x are,
x = 1.55, -6.883
The distance cannot be negative. So, the electric field at x = 1.55 m is said to be zero.
Thus, the required value of x is 1.55 m.
To know more about electric field:
https://brainly.com/question/4273177
#SPJ4
a load of 60 j 80 has a current of 9.60 a with a phase angle of 30o, the real power absorbed by the load is:
A load of 60 j 80 has a current of 9.60 a with a phase angle of 30o, the real power absorbed by the load is P=5529.61W
Z₁ = 60+j80
I=96/30 A
VL= 2. ZL= (9.6(30) 60+j80)
V₁ =(19.6/30") (100|53.136)
Vl=960 (83.130) V
power absorbed by Land
= (960) (9.6) cos(83.136 - 30°)
P=5529.61W
Real power is the amount of energy that is actually consumed by the resistive load, whereas perceived power is the amount of energy that the grid must be able to handle. Real power is measured in watts, but apparent power is measured in VA (Volt Ampere),
Learn more about power:
brainly.com/question/1634438
#SPJ4
The statements below represent each step of the Scientific Method based upon a research study conducted about the effects of fast food reported by ABC news, which you can view HERE. Match each statement to the appropriate step of the Scientific Method. Example: Will people who eat fast food, daily, develop symptoms of poor health related to obesity? Observation/Question Answer:
A. Hypothesis (What do you believe will happen?) B. Experiment (Procedures that lead to a discovery or test a hypothesis.) C. Results (The outcome of the experiment.) ___. The hypothesis was supported by the data; the increased intake of calories in the experimental group increased the likelihood of developing hypertension. ___. An experimental group of 20 subjects will consume an extra 1000 calories per day from fast food, in addition to their normal daily caloric intake. A control group of 20 subjects will not consume an extra 1000 calories from fast food and will continue with their normal diet. The blood pressure of each subject in both groups will be recorded once per week for eight weeks. ___. People who increased their caloric intake by 1000 calories per day are more likely to develop hypertension (high blood pressure). ___. After eight weeks, 70% of subjects in the experimental group had developed hypertension. In the control group, only 5% of subjects developed hypertension.
A. Hypothesis (What do you believe will happen?) People who increased their caloric intake by 1000 calories per day are more likely to develop hypertension (high blood pressure).
What is Hypothesis ?Hypothesis is a process of generating testable predictions about a certain phenomenon. It is an educated guess or explanation of a certain phenomenon, based on available facts and evidence. It is the starting point for further investigation and helps to determine the outcome of a scientific experiment. Hypothesis helps to develop a framework of understanding and can be used to create further predictions. It is an essential step in the scientific method, as it helps to structure an experiment and provide a basis for further evaluation.
B. Experiment (Procedures that lead to a discovery or test a hypothesis.) An experimental group of 20 subjects will consume an extra 1000 calories per day from fast food, in addition to their normal daily caloric intake. A control group of 20 subjects will not consume an extra 1000 calories from fast food and will continue with their normal diet. The blood pressure of each subject in both groups will be recorded once per week for eight weeks.
C. Results (The outcome of the experiment.) After eight weeks, 70% of subjects in the experimental group had developed hypertension. In the control group, only 5% of subjects developed hypertension. The hypothesis was supported by the data; the increased intake of calories in the experimental group increased the likelihood of developing hypertension.
To learn more about Hypothesis
https://brainly.com/question/11555274
#SPJ4
two charges are on the x-axis (see below). charge 1 is is 50.0 nc and is located 20.0 cm to the left of the origin. charge 2 is located 35.0 cm to the right of the origin. 1) what is the magnitude and direction of the electric field at the origin due to charge 1?
The electric field due to charge 1 at the origin is 2.24 x 10^5 N/C in the direction to the left.
What is Coulomb's Law?Coulomb's Law states that the force between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. It is represented as F = (k * q1 * q2) / r2, where F is the force, k is a constant, q1 and q2 are the charges, and r is the distance between the two particles.
Charge 1: 50.0 nC, located 20.0 cm to the left of origin
Charge 2: 35.0 cm to the right of origin
Using Coulomb's Law, the electric field at the origin due to charge 1 is:
E1 = kQ1/r^2
Where:
k = 8.99 x 10^9 Nm^2/C^2
Q1 = 50.0 nC = 5.00 x 10^-7 C
r = 20.0 cm = 0.20 m
Therefore,
E1 = (8.99 x 10^9 Nm^2/C^2)(5.00 x 10^-7 C)/(0.20m)^2
E1 = 2.24 x 10^5 N/C
Hence, the electric field due to charge 1 at the origin is 2.24 x 10^5 N/C in the direction to the left.
To learn more about Coulomb's Law
Here: https://brainly.com/question/26892767
#SPJ4
when the velocity and acceleration of an object have opposite signs, the speed of the object increases. T/F
when the velocity and acceleration of an object have opposite signs, the speed of the object increases, is true statement.
What is velocity and how is it related to acceleration?Velocity is a vector quantity that represents the rate of change of an object's position with respect to time, including both the speed and direction of motion. It is defined as the derivative of position with respect to time. Acceleration and velocity are closely related quantities in mechanics. Acceleration is defined as the rate of change of velocity over time. In other words, acceleration is the derivative of velocity with respect to time. When an object's velocity is increasing, its acceleration is positive, and when its velocity is decreasing, its acceleration is negative. If an object is moving at a constant velocity, its acceleration is zero.
To know more about Acceleration, visit:
https://brainly.com/question/12550364
#SPJ4
Sorry, just for clarification is this d? Thank you!
B
Explanation:
I suggest option B for you but you could research more on it
If F = 5 kN and theta = 30 degree, determine the magnitude of the resultant force and its direction (measured counterclockwise from the positive x axis).
Given a force F = 5 kN operating at an angle of = 30°, the size of the resulting force may be calculated as follows:[tex]\begin{equation}(F 2+F 2-2 F x F \cos ())=R\end{equation}[/tex] is the resulting force's size.
F is the magnitude of each force, and is the angle between the forces. When we plug in the values, we get: [tex]R = √(5^2 + 5^2 - 2 * 5 * 5 * cos(30°)) R = √(25 + 25 - 50 * √(3)/2) R = √(50 - 25 * √(3)) R = √(50 * (1 - √(3))) R = √(50 * (√(3) - 1)) R ≈ 7.07 N[/tex] The inverse tangent (arctan) function may be used to calculate the direction of the resulting force, as shown below: arctan(Fsin() / (Fcos() + F)) where is the resulting force angle measured counterclockwise from the positive x-axis. When we plug in the values, we get: [tex]arctan(5 * sin(30°) / (5 * cos(30°) + 5) arctan(0.5 / 2.5) = Φ ≈ 14.04°[/tex] As a result, the resulting force has a value of roughly 7.07 N and a direction of approximately 14.04° counterclockwise from the positive x-axis.
learn more about force here:
https://brainly.com/question/13191643
#SPJ4
State laws of conservation and energy and prove it in case of a freely falling body
According to the law of conservation of energy, energy cannot be created or destroyed. Energy changes into different forms, and potential energy plus kinetic energy equals a constant.
The physical energy of the system is conserved in the scenario of a freely falling body. The kinetic energy (K) and potential energy (U) of the freely falling body are added to form mechanical energy (E).
Thus, E = K + U = constant.
Potential energy is the opposite of the work performed by a force that affects the body. In the case of earth's gravity, the potential energy of a body with mass m and height h is given by the equation:
PE = mgh.
Learn more about law of kinetic energy here: https://brainly.com/question/29571427
#SPJ4
sketch at least two cycles of the voltage vs time graph for an ideal periodic digital waveform with a 1.0 volt amplitude, a 12 us period and a 25% duty cycle. label your axes clearly. what is the frequency of this waveform?
The sketch for the voltage vs time graph for an ideal periodic digital waveform with a 1.0 volt amplitude, a 12 us period and a 25% duty cycle would look like this:
The x-axis represents time and the y-axis represents voltage.The frequency of this waveform is 83.3 kHz (1/12 us).The voltage vs time graph for an ideal periodic digital waveform with a 1.0 volt amplitude, a 12 us period and a 25% duty cycle is a type of waveform that is commonly used in digital electronics. This type of waveform is important because it is used to represent the logical states of digital circuits, such as 0's and 1's.
Learn more about periodic digital waveform
https://brainly.com/question/22858440
#SPJ4
the force that charge q1 exerts on q2 is opposite and ________ the force that charge q2 exerts on q1.
The force that charge q1 exerts on q2 is opposite and equal in magnitude to the force that charge q2 exerts on q1.
What is charge?
Charge is a physical property of matter that can be either negative or positive. It is related to the electromagnetic force, and is measured in coulombs. Charge is the cause of electric fields and electric potential, which are important in many areas of physics and chemistry. Charge can be transferred from one object to another, and is conserved in any physical process. Charge can also be created from the motion of matter through a medium, such as when electrons are pushed from one material to another. Charge is always conserved, meaning that the net charge of a system will always be the same.
Therefore, The force that charge q1 exerts on q2 is opposite and equal in magnitude to the force that charge q2 exerts on q1.
To learn more about charge
Here: https://brainly.com/question/2373424
#SPJ4
do experimental measurements give the true value of a physical quantity? explain.
Experimental measurements don't necessarily reflect a physical quantity's genuine value. The ideal or theoretical value of a physical quantity, which is never perfectly measurable in reality, is that quantity's true value.
When a physical quantity is measured, it is always subject to a variety of causes of error, including the constraints of the measuring device, the environment, operator error, and random fluctuations.
The most that can be done is an estimation of the true value, which is expressed as a measured value with a corresponding uncertainty. The range of values that can be logically regarded as the actual value of the quantity being measured is reflected in the uncertainty. The accuracy of the measuring device, the operator's expertise, and the repeatability of the measurement process are all elements that influence the measurement's uncertainty. In conclusion, experimental measurements provide an estimate of a physical quantity's real value rather than the actual value.
learn more about physical quantity here:
https://brainly.com/question/26171158
#SPJ4