Avogadro's law states that 2.2075 moles must be added to the container in order to raise the pressure to 325 kPa.
What is meant by Avogadro's law?The general number of atoms or molecules has a direct relationship to the volume occupied by a gas under constant temperature and pressure, according to Avogadro's law, a gas law.
Given that it links temperature, pressure, volume, and substance amount, it is closely related to the ideal gas equation.
V ∝ n,
The straight line graph of volume versus moles is a straight line passing through the origin which implies that zero moles of gas occupy zero volume.
As 1 atm = 101.325 kPa
325 kPa = 325/101.325 = 3.2075 atm, as at STP 1 atm =22.4 liter.
Applying Avogadro's law,
n₂ = 71.848 × 1/22.4 = 3.2075 moles .
To estimate moles to be added, we get
3.2075 - 1 = 2.2075 moles.
Therefore, to increase the pressure in the container to 325 kPa, 2.2075 moles of gas must be supplied.
To learn more about Avogadro's law refer to:
brainly.com/question/3491421
#SPJ4
Why did the percentage of oxygen increase in the early atmosphere?
The increase in the percentage of oxygen in the early atmosphere was a result of the evolution of photosynthetic organisms, and it played a crucial role in the development of life on Earth.
What is Atmosphere?
The atmosphere is the layer of gases that surrounds a planet and is held in place by the planet's gravity. On Earth, the atmosphere is composed of a mixture of gases that include nitrogen (78%), oxygen (21%), argon (0.9%), and carbon dioxide (0.04%), as well as trace amounts of other gases. The atmosphere plays a vital role in supporting life on Earth, providing the air that we breathe and protecting us from harmful radiation from the sun.
The early atmosphere of the Earth was mostly composed of nitrogen, carbon dioxide, water vapor, and small amounts of methane, ammonia, and other gases. The percentage of oxygen in the early atmosphere was very low, estimated to be less than 0.1%.
The increase in the percentage of oxygen in the Earth's atmosphere is believed to be due to the emergence and evolution of photosynthetic organisms, such as cyanobacteria and algae. These organisms are capable of using sunlight to convert carbon dioxide and water into organic matter and oxygen through the process of photosynthesis. This process began around 3.5 billion years ago and over time, oxygen began to accumulate in the atmosphere, as it was released as a waste product of photosynthesis.
As oxygen levels increased, it became possible for more complex organisms to evolve, including those that use oxygen for respiration. The accumulation of oxygen also had a significant impact on the Earth's climate and environment, leading to the development of the ozone layer and the reduction of carbon dioxide levels in the atmosphere.
Learn more about Atmosphere from given link
https://brainly.com/question/24925283
#SPJ4
the three smaller components that make up atoms are
The three smaller components that make up atoms are neutrons, electrons and protons.
What is an atom?
An atom is the smallest particle of an element that still retains its chemical properties. Atoms consist of a small, dense nucleus surrounded by a cloud of negatively charged electrons. The nucleus is made up of protons and neutrons, and contains nearly all of the mass of the atom. The number of protons in an atom's nucleus determines the element it is.
The three smaller components that make up atoms are protons, neutrons, and electrons. Protons carry a positive charge and are found in the nucleus of an atom. Neutrons carry a neutral charge and are also found in the nucleus. Electrons carry a negative charge and are found in the electron cloud that surrounds the nucleus.
Therefore, neutrons, electrons and protons are the answers.
To learn more about atom from the link
https://brainly.com/question/17545314
#SPJ4
What is the atomic mass of BaSO4 ?
The atomic mass of Barium sulfate (BaSO4) is 233.39 g/mol.
The atomic mass of BaSO4 can be calculated by adding up the atomic masses of its constituent atoms. BaSO4 is composed of one barium atom (Ba), one sulfur atom (S), and four oxygen atoms (O).
The atomic mass of barium (Ba) is 137.33 g/mol, the atomic mass of sulfur (S) is 32.06 g/mol, and the atomic mass of oxygen (O) is 16.00 g/mol.
To calculate the atomic mass of BaSO4, we need to multiply the atomic mass of each element by the number of atoms present in the molecule, then add them up.
Atomic mass of BaSO4 = (1 x atomic mass of Ba) + (1 x atomic mass of S) + (4 x atomic mass of O)
Atomic mass of BaSO4
= (1 x 137.33 g/mol) + (1 x 32.06 g/mol) + (4 x 16.00 g/mol)
Atomic mass of BaSO4 = 137.33 g/mol + 32.06 g/mol + 64.00 g/mol
Atomic mass of BaSO4 = 233.39 g/mol
To learn more about atomic mass :
https://brainly.com/question/30390726
#SPJ4
How many valence electrons does magnesium(Mg) have?
Magnesium have two valence electrons. Because the outer energy level for the magnesium atom is 3 and it has two electron in this energy level.
The Valence electrons are defined as the electrons that located in the outermost electron shell of an atom. These valence electrons being the furthest from the nucleus and thus the least tightly held by the atom are the electrons that participate in bonds and reactions. The number of valence electrons that an element has determines its reactivity, electronegativity and the number of bonds it can form. We can use the periodic table to help to determine how many valence electrons an element specifically a neutral atom of the element has. Looking at the group that the element is in as the group number indicates the number of valence electrons that the element has.
To learn more about Valence electron please visit:
https://brainly.com/question/371590
#SPJ4
how much ventilation do you need for a propane heater
A minimum of 2 square feet (ft2) should be left open near the floor and 2 ft2 should be left open towards the ceiling. RCP- 200V 200,000 Reddy Heater Ample ventilation should be provided. Allow at least 6 feet2 of fresh outside air before using the heater.
What is a propane heater?Your home can be heated using a propane furnace. These furnaces are a reliable source of alternative energy since they burn propane gas to provide energy that can be utilized to heat your home.A propane furnace transforms liquid propane into a gas that transfers heat over a heat exchanger. A blower will then transmit the heat over the heat exchanger whenever this element reaches a preset degree, after which it will be disseminated through the duct system. A balanced chemical reaction is necessary for a catalytic heater to operate. When propane and oxygen react, the main products are water vapor and carbon dioxide. The catalyst is the primary component that powers the reaction.To learn more about propane heater refer to:
https://brainly.com/question/12523080
#SPJ4
How to know if a compound contains both ionic and covalent bonds?
Determining if a compound contains both ionic and covalent bonds can be done by examining the types of atoms involved in the compound and the nature of their bonding.
Ionic bonds involve the transfer of electrons between a metal and a nonmetal. When this occurs, one atom becomes positively charged (cation) and the other becomes negatively charged (anion). These oppositely charged ions then attract each other to form the ionic compound.
Covalent bonds, on the other hand, involve the sharing of electrons between two nonmetals. In this type of bonding, both atoms share their valence electrons to form a bond.
If a compound contains both a metal and a nonmetal, it is likely to have ionic bonds. However, some compounds that contain only nonmetals can also have ionic bonds. For example, ammonium chloride (NH4Cl) contains only nonmetals, but it is an ionic compound because it is formed by the transfer of an electron from the nitrogen atom to the hydrogen atoms.
If a compound contains only nonmetals, it is likely to have covalent bonds. However, if the nonmetals involved have a large difference in electronegativity, they can form polar covalent bonds, which can have some ionic character.
Overall, to determine if a compound contains both ionic and covalent bonds, you should look at the types of atoms involved and the nature of their bonding. If the compound contains both metals and nonmetals, it is likely to have both ionic and covalent bonds. If the compound contains only nonmetals, it could have either purely covalent bonds or polar covalent bonds with some ionic character.
Learn more about covalent bonds here :
brainly.com/question/19382448
#SPJ4
100 g of O2 how many liters of CO2
Answer:
Explanation:
What chemical compound leads to the formation of photochemical smog in the troposphere when it reacts with other compounds in the presence of sunlight?
When a molecule combines with other chemicals in the presence of sunshine, NOx, it creates photochemical smog in the troposphere.
What is photochemical?When light energy is absorbed by the molecules of a substance, a chemical process known as a photochemical reaction occurs. This reaction causes the molecules to briefly enter an excited state, which changes the physical and chemical characteristics of the substance's original molecule.The area of chemistry that deals with how light affects chemical reactions is called photochemistry. In most cases, this phrase refers to a chemical reaction brought on by the absorption of ultraviolet, visible light, or infrared radiation. Energy in the form of light is absorbed, which initiates a chemical process called a photochemical reaction.Transient excited states are produced as a result of molecules absorbing light, and these states have very different chemical and physical characteristics from the initial molecules.To learn more about photochemical refer to:
https://brainly.com/question/28504426
#SPJ4
what name one similarity and one difference between simple diffusion and osmosis?
Answer:
.
Explanation:
Diffusion is the net movement of anything from a region of higher concentration to a region of lower concentration.
Osmosis is the movement of water molecules from a solution with a high concentration of water molecules to a solution with a lower concentration of water molecules,
Similarly : Both diffusion and osmosis occur to stabilize the concentration of molecules.
Difference : Osmosis can only function in a liquid medium, but diffusion can occur in all three mediums (solid, liquid and gas).
Hope it helps..
n moles of an ideal gas at temperature T1 and volume V1 expand isothermally until the volume has doubled.
A) In terms of n, T1, and V1 what is the final temperature?
Express your answer in terms of the variables n, T1, V1, and constant R
B) In terms of n, T1, and V1, what is the work done on the gas?
Good hand writing is prefered.
Express your answer in terms of the variables n, T1, V1, and constant R.
C) In terms of n, T1, and V1, what is the heat energy transferred to the gas?
A) The final temperature (T2) of N moles of an ideal gas, initially at temperature T1 and volume V1, which expands isothermally until its volume doubles.
Can be expressed as T2 = T1
This is because the ideal gas law for an isothermal process is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature. Since the temperature is constant, and the volume doubles, the pressure must decrease by a factor of two, and as a result, the temperature must remain the same.
B) The work done on the gas during the isothermal expansion process can be calculated using the following equation:
[tex]W = -nRT1 ln(2)[/tex]
This equation follows from the formula for the work done in an isothermal process, which is given by:
[tex]W = -∫PdV[/tex]
where P is the pressure and V is the volume. For an ideal gas, PV = nRT, so we can substitute this equation into the above expression to get:
[tex]W = -nRT ln(V2/V1)[/tex]
Since the volume doubles, V2 = 2V1, and we get:
W = -nRT1 ln(2)
C) Since the expansion is isothermal, the heat energy transferred to the gas can be calculated using the following equation:
[tex]Q = W = -nRT1 ln(2)[/tex]
This equation shows that the heat energy transferred to the gas is equal to the work done on the gas, which is equal to -nRT1 ln(2). Since the natural logarithm of 2 is a constant, this means that the amount of heat transferred is proportional to the initial temperature, the number of moles, and the ideal gas constant.
Learn more about ideal gas law
brainly.com/question/28257995
#SPJ4
what is important for recrystallization of benzoic acid?
In comparison to cold water, benzoic acid dissolves much more readily in hot water. Consequently, crystals are created when a saturated solution of benzoic acid is cooled.
The laws of solubility are the foundation of recrystallization; generally, compounds (solutes) are more soluble in hot liquids (solvents) than they are in cold liquids. The solute no longer dissolves in the solvent when a saturated hot solution cools, and crystals of the pure compound form.
Small amounts of hot water are added to dissolve the benzoic acid since it dissolves considerably more readily in hot water than in cold. The hot, saturated, aqueous solution of benzoic acid becomes supersaturated when it is cooled, and benzoic acid crystallizes from the supersaturated solution.
A very regulated temperature reduction and enough time are essential components for a successful recrystallization process.
To know about recrystallization
https://brainly.com/question/29215760
#SPJ4
How many valence electrons are in N2 −?
N2 (nitrogen) has seven valence electrons.
Considering that N2- is the nitride anion, it now has a stable octet configuration after gaining two electrons.
We must first take into account the valence electrons of nitrogen in order to calculate the amount of valence electrons in N2 (N). Since nitrogen belongs to Periodic Table Group 15, it contains 5 valence electrons.
Each nitrogen atom in N2 shares 3 electrons with the other two nitrogen atoms that combine to produce N2, which has a total of 4 electrons shared in a triple bond. N2-, on the other hand, now possesses seven valence electrons overall after gaining two more electrons (5 from nitrogen plus 2 additional electrons).
To learn more about Valence electrons :
https://brainly.com/question/12717954
#SPJ4
Substance P r eacts with dilute hydrochloric acid to produce a gas.This gas reduces substance Q.
WHAT IS P AND Q
Substance X is Sodium Hydrogen Carbonate and Y is Carbon Dioxide.
NaHCO3(s)+HCI(aq)→CO2(g)+NaCI(aq)+H2O(l)
What is sodium?
The Latin name for sodium is natrium, and it has the chemical elemental number 11 and the symbol Na. It is an extremely reactive, delicate, silvery-white metal. The periodic table's group 1 designates sodium as an alkali metal. 23Na is its sole stable isotope. In order to prepare the free metal, which does not exist in nature, compounds must be used.The mineral feldspar, sodalite, and halite are only a few examples of the many minerals that contain sodium, the sixth most prevalent element in the Earth's crust (NaCl). Since sodiumsodium ions have been slowly leached from Earth's minerals by water over aeons, many sodium salts are highly water-soluble.To know more about sodium, click the link given below:
https://brainly.com/question/29327783
#SPJ1
A robot vacuum cleans a dirty floor using multiple passes. During each pass, 22% of the dirt is removed. If the floor initially has 530 ml of dirt, after how many passes will there be 100 ml of dirt left?.
It will take 9 passes for the robot vacuum to remove 430 ml of dirt, leaving 100 ml of dirt on the floor.
Each pass removes 22% of the dirt, so the amount of dirt remaining after each pass is 78% of the previous amount. We can use this information to calculate the amount of dirt remaining after each pass and find out how many passes it takes to reach 100 ml.
Pass 1: 530 ml * 0.78 = 410.4 ml
Pass 2: 410.4 ml * 0.78 = 320.52 ml
Pass 3: 320.52 ml * 0.78 = 249.89 ml
...
Pass 9: 100.11 ml * 0.78 = 78.08 ml
So it will take 9 passes for the robot vacuum to remove 430 ml of dirt, leaving 100 ml of dirt on the floor.
Learn more about Simple Maths:
https://brainly.com/question/13442477
#SPJ4
Which is the strongest interparticle force present in a sample of H3PO4? dipole―dipole forces ionic bonding forces ion―induced dipole forces dispersion forces ion―dipole forces hydrogen bonding forces dipole―induced dipole forces
Ion―dipole forces is the strongest interparticle force present in a sample of H₃PO₄.
Intermolecular forces are defined as electrostatic forces which includes van der Waals forces and hydrogen bonds. Molecules present in liquids are held to other molecules by intermolecular interactions, which are weaker than the intramolecular interactions that hold the atoms together within molecules and polyatomic ions.
An ion-dipole force is defined as an attractive force that results from the electrostatic attraction between an ion and a neutral molecule that has a dipole. These are most commonly found in solutions. Ion dipole forces are especially important for solutions of ionic compounds in polar liquids.
Learn more about ion - dipole forces of attraction from the link given below.
https://brainly.com/question/22524652
#SPJ4
Calculate the molality of the solution. (assume a density of 1. 08 g/ml for the solution. ).
The molality of the solution is 0.162 m. Molality is a measure of the concentration of a solute in a solution and is defined as the number of moles of solute per kilogram of solvent.
To calculate the molality, we first need to find the number of moles of solute in the solution and then divide that by the mass of the solvent. The number of moles of solute in the solution is 0.18 moles.
The volume of the solution is 100.0 mL, or 0.100 L, and its density is 1.08 g/mL, so the mass of the solvent can be calculated as:
0.100 L x 1.08 g/mL = 0.108 kg.So, the molality of the solution is 0.18 moles / 0.108 kg = 0.162 m (moles per kilogram). The unit of molality is moles per kilogram of solvent and is often used when the amount of solvent is large relative to the amount of solute.
Learn more about Molality:
https://brainly.com/question/24065939
#SPJ4
I need to learn how to identify aliphatic hydrocarbons and how to look at a compound and name it.
Aliphatic hydrocarbons are carbon atom-based hydrocarbons. The aliphatic hydrocarbons known as alkanes only have one covalent bond.
What is aliphatic hydrocarbons?
Aliphatic hydrocarbons are carbon atom-based hydrocarbons. Aliphatic hydrocarbons come in three different varieties. The aliphatic hydrocarbons known as alkanes only have one covalent bond.
Alkynes are hydrocarbons with a C-C triple bond, while alkenes are hydrocarbons with at least one C-C double bond.
Therefore, aliphatic hydrocarbons are carbon atom-based hydrocarbons. The aliphatic hydrocarbons known as alkanes only have one covalent bond.
To know more about aliphatic hydrocarbons, here:
https://brainly.com/question/13199501
#SPJ1
Question: Why Would You Expect A 1.5 M CaG12 Solution To Have A Lower Freezing Point Than A 1.5 M NaCl Solution? CaCl, Has More Particles When Dissolved. NaCl Has More Particles When Dissolved. CaCl2 Is Warmer Than Naci. It Won't. They Should Have The Same Freezing Point,
1.5 m [tex]$$CaCl_2[/tex] is anticipated to have a lower freezing point than 1.5 m NaCl due to the greater particle count.
What is meant by freezing point?When a system's temperature drops below the freezing point of a solid, it enters a state of liquid known as freezing. The change from a liquid to a solid state is hence a phase transition.
The expectation is that a 1.5 m [tex]$$CaG_{12[/tex] solution will freeze at a lower temperature than a 1.5 m NaCl solution because [tex]$$CaCl_2[/tex] contains more particles when dissolved. The right response is therefore "A: [tex]$$CaCl_2[/tex] has more particles when dissolved."
A solution's freezing point decreases proportionately to the amount of solute particles present in the solution. The solute particles prevent the solvent molecules from forming the crystal structure required for freezing to take place, which is the reason why this happens. The freezing point is further lowered when there are more solute particles in the solution.
Because sodium chloride (NaCl) is an ionic compound with just one ion (Na+ and Cl-), 1.5 m [tex]$$CaCl_2[/tex] has more particles than 1.5 m NaCl because calcium chloride ([tex]$$CaCl_2[/tex]) is a molecular complex with two ions (Ca2+ and Cl-). As a result, 1.5 m [tex]$$CaCl_2[/tex] is anticipated to have a lower freezing point than 1.5 m NaCl due to the greater particle count.
To learn more about freezing point refer to:
brainly.com/question/17562261
#SPJ4
How do you find the number of neutrons in an element on the periodic table?
When we subtract the atomic number of the atom from its atomic mass, we get the number of neutrons in the atom of the periodic table.
The nucleus of the atom, a huge solid mass that occupies the core of the atom, is what gives it its name. In fixed orbits, the electrons move around the nucleus.
The nucleus of an atom contains protons and neutrons, and the quantity of protons determines how many electrons are present in the atom.
Now investigate the claim that Z+N=A may be used to calculate the number of neutrons in an atom.
Z is the atomic number of the element here.
The quantity N is the number of neutrons.
To know more about periodic table, visit,
https://brainly.com/question/15987580
#SPJ4
Help please <3 Air molecules can also absorb IR radiation. So, when we analyze any sample with IR light that light must travel through both air and our sample for the analysis. How might you expect we could correct for this during our sample collection to obtain the spectrum of just our sample and not the sample + air? (Hint: it will require taking two IR readings).
Answer:
To correct for the interference of air molecules in the IR spectrum, we can take two IR readings - one with the sample in place and the other with no sample but with air in the sample chamber. By taking the difference between the two readings, we can obtain the spectrum of the sample alone, without interference from the air. This technique is known as background subtraction. The first reading with the sample in place will be the test variable, while the second reading with air in the sample chamber will be the control variable. The outcome variable will be the resulting spectrum after subtracting the control from the test variable.
A balanced chemical equation is in accordance with ?
A balanced chemical equation is a chemical equation with the number of atoms of each element must be the same on both sides of the equation.
A balanced chemical equation is in accordance with the Law of Conservation of Mass. This law states that matter cannot be created or destroyed, only rearranged.
Therefore, in This is achieved by balancing the equation, which involves adjusting the coefficients in front of each compound or element until the number of atoms of each element is equal on both sides of the equation.
For example, consider the unbalanced chemical equation: Fe + O₂ → Fe₂O₃
In this equation, there are two atoms of oxygen on the left side and three atoms of oxygen on the right side. To balance the equation, we can add a coefficient of 3 in front of the O₂ on the left side and a coefficient of 2 in front of the Fe on the left side: 2Fe + 3O₂ → Fe₂O₃
Now, the number of atoms of each element is equal on both sides of the equation and the equation is balanced. This balanced chemical equation accurately reflects the Law of Conservation of Mass.
To know more about balanced chemical equation here:
https://brainly.com/question/28294176#
#SPJ11
What is the pH of 0.75 M ( HF) which is weak acid?
The pH of 0.75 M HF is 1.77.
To find the pH of 0.75 M HF (hydrofluoric acid), we first need to calculate the acid dissociation constant (Kₐ) of HF.
The chemical equation for the dissociation of HF is,
HF + H₂O ⇌ H₃O+ F⁻
The Kₐ of HF is 6.8 x 10^-4, which means it is a weak acid.
Now, use the Kₐ expression to find the concentration of H₃O⁺ in the solution,
Kₐ = [H₃O⁺][F⁻]/[HF]
[H₃O⁺] = √(Kₐ x [HF]) = √(6.8 x 10^-4 x 0.75) = 0.017 M
Finally, use the definition of pH to find the pH of the solution,
pH = -log[H₃O⁺] = -log(0.017) = 1.77
To know more about the pH, here
brainly.com/question/491373
#SPJ4
A 353.2mL sample of chlorine gas is collected at 25.2°C and an atmospheric pressure of 100.8kPa What would the volume be at STP?
Answer:
Explanation:
To solve this problem, we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
At STP (standard temperature and pressure), the temperature is 0°C or 273.15 K, and the pressure is 1 atm or 101.325 kPa.
We can use the ideal gas law to find the number of moles of chlorine gas in the sample:
n = PV/RT
where P is the pressure, V is the volume, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the given temperature of 25.2°C to Kelvin:
T = 25.2°C + 273.15 = 298.35 K
Now we can calculate the number of moles of chlorine gas in the sample:
n = (100.8 kPa)(353.2 mL)/(8.314 J/K/mol)(298.35 K)
n = 0.0158 mol
Next, we can use the number of moles and the ideal gas law to find the volume at STP:
V = nRT/P
V = (0.0158 mol)(8.314 J/K/mol)(273.15 K)/(101.325 kPa)
V = 0.364 L or 364 mL
Therefore, the volume of the chlorine gas at STP would be 364 mL.
What happened to the concentration of the solution when some solution was
dispensed?
It increased
It stayed the same
It decreased
Answer:
It stayed the same
Explanation:
No matter how much solution you have left, the concentration of solution does not change. IT REMAINS THE SAME.
I hope this makes sense to you. I am generally good with following up with additional questions. Feel free to leave a comment if you have any questions or you can also message me as well!
For an aqueous solution of hf, determine the van't hoff factor assuming 0% ionization.
The van't Hoff factor, i, is a measure of the degree of dissociation of a solute in a solution.
It is defined as the ratio of the number of particles produced when a solute molecule dissolves in a solvent, to the number of solute molecules in the undissolved state. In the case of an aqueous solution of hydrofluoric acid (HF), if 0% ionization is assumed, then no dissociation of the solute has taken place, and the van't Hoff factor, i, would be equal to 1.
This means that for every molecule of hydrofluoric acid that is dissolved in water, only one particle (the molecule) is produced, and the solution remains a single-component solution.
It is worth noting that hydrofluoric acid is a weak acid and does undergo some degree of ionization in aqueous solution, so in reality, the van't Hoff factor would be greater than 1, but the exact value would depend on the concentration of the acid and the conditions of the solution.
Learn more about aqueous solution of hf:
https://brainly.com/question/27548795
#SPJ4
If 3.5 moles of Zn are used, how many moles of HCl are required?
A mole ratio is used to convert the given number of moles of one substance to the unknown number of moles of a second substance. True or False?
True. A mole ratio is a conversion factor used to relate the number of moles of one substance in a chemical reaction to the number of moles of another substance involved in the same reaction.
The mole ratio is determined by the stoichiometry of the balanced chemical equation and specifies the proportional relationship between the number of moles of reactants and products involved in the reaction. By using mole ratios, it is possible to convert the given number of moles of one substance into the corresponding number of moles of another substance, allowing for stoichiometric calculations to be performed.
Find more about mole ratio
brainly.com/question/28298591
#SPJ4
How much HI is produced from 13.4 g H2 if H2 is the limiting reagent?
The limiting reactant in this reaction is hydrogen gas.2 g of hydrogen gas will produce about 254 of HI. Then, 13.4 g will produce 1702 g of HI.
What is limiting reactant ?A limiting reactant in a reaction is the reactant which is fewer in amount or consume early without complete reaction with other reactants. Hence, as soon as this reactant is consume, the reaction stops.
The given reaction of the formation of HI can be written as follows:
H₂ + I₂ → 2HI
Atomic mass of H= 1 g/mol
molecular mass of H₂ = 2g/mol
As per the balanced chemical equation of the reaction, one mole or 2 g of hydrogen gas produce 2 moles of hydrogen iodide.
molar mass of HI = 127 g/mol
mass of 2 moles = 127 × 2 = 254 g.
2 of hydrogen produces 254 g HI. Then , 13.4 g of H₂ produces :
(254 × 13.4) /2 = 1702 g of HI
Therefore, 13.4 g of H₂ produce 1702 g of HI.
Find more on limiting reactants:
brainly.com/question/14225536
#SPJ9
Which one of the following best defines the notion of the significance level of a hypothesis test?a. The probability of rejectin H2O whether it's true or notb. The probability of observing a sample statistic more extreme than the one actually obtained, assuming the null hypothesis is truec. The probability of the type I errorD. The probability of the type II error
Option B, The probability of observing a sample statistic is more extreme than the one obtained, assuming the null hypothesis is true defines the notion of the significance level of a hypothesis test.
The significance level of a hypothesis test is the probability of observing a sample statistic that is more extreme than the one obtained, assuming the null hypothesis is true.
This value is used to set the threshold for the level of evidence required to reject the null hypothesis in favor of an alternative hypothesis.
The significance level is commonly represented by alpha (α), with typical values being 0.01 or 0.05. If the calculated p-value is less than the significance level, the null hypothesis is rejected and the alternative hypothesis is supported.
Learn more about hypothesis tests at
https://brainly.com/question/30588452
#SPJ4
What is limiting reactant with example?
A limiting reactant is the reactant in a chemical reaction that determines how much of the products can be made. It is the reactant that is used up first and limits the amount of product that can be produced.
For example, consider the reaction between hydrogen gas (H₂) and oxygen gas (O₂) to produce water (H₂O):
2 H₂ + O₂ → 2 H₂O
In this reaction, the ratio of hydrogen to oxygen is 2:1. This means that for every 2 molecules of hydrogen, we need 1 molecule of oxygen to produce 2 molecules of water.
If we have 4 molecules of hydrogen and 2 molecules of oxygen, we have enough of both reactants to produce 4 molecules of water. However, if we have 4 molecules of hydrogen and only 1 molecule of oxygen, we can only produce 2 molecules of water. In this case, oxygen is the limiting reactant because it is used up first and limits the amount of water that can be produced.
To know more about limiting reactant here:
https://brainly.com/question/14225536#
#SPJ11