A reaction that proceeds by first-order irreversible kinetics is oxidizing chemical A in a wastewater treatment basin with a mean residence time of 1.5 hours. The reaction rate constant is The basin is unbaffled and may be characterized as two completely mixed tanks in series. If the steady-state influent concentration is 30 mg/l, find the effluent concentration. If baffles are placed in the basin so that the basin may be characterized as four completely mixed tanks in series, and the mean residence time remains constant, find the effluent concentration.

Answer:

Dióxido de azufre

Densidad 26 288 kg/m³; 0,0026 g/cm³

Masa molar 64,0638 g/mol

Punto de fusión 198 K (−75 °C)

Punto de ebullición 263 K (−10 °C)

Answer: The one listed below that's NOT an example of potential energy is mechanical energy. Mechanical energy is categorized as a kinetic energy with light, sound, and thermal/heat energy.

HOPE THIS HELPS

The energy that a body possesses as a result of its position with relation to other bodies, internal tensions, electric charge, and other considerations . Mechanical energy is not an example of potential energy.

Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is compressed or stretched, its potential energy increases.

Although a force must be applied to an object in order for it to store potential energy, potential energy is technically stored inside matter.

The potential energy must be released, despite the fact that the energy is held in the object's mass due to gravity or elastic forces.

Thus, Mechanical energy is not an example of potential energy.

To learn more about potential energy refer the link below;

https://brainly.com/question/24284560

#SPJ2

Answer:

If the earth's surface is cold, warm air above it will lose heat energy to the cold surface below and the now cool air will remain close to the surface. If a damp surface is warmer than the air above it, some water will evaporate, and the air above the surface will be heated.

Explanation:

:)

Answer:  The volume needed at STP is 2.016 L

Explanation:

According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.

To calculate the moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given volume}}{\text {Molar volume}}[/tex]

[tex]0.0900mol=\frac{x}{22.4L/mol}[/tex]

[tex]x=0.0900mol\times 22.4L/mol=2.016L[/tex]

Thus the volume needed at STP is 2.016 L

Answer:

[tex] 3530000000 \: pm[/tex]

Explanation:

[tex]0.00353 \: m \\ \\ = 3.53 \times {10}^{ - 3} \: m \\ \\ = 3.53 \times {10}^{ - 3} \times {10}^{12} \\ \\ = 3.53 \times {10}^{ - 3 +12} \\ \\ = 3.53 \times {10}^{9} \: pm\\\\= 3530000000 \:pm[/tex]

Answer:

Solids for sure

particles of solid cant flow.

Answer:

B)Solids

Solids have  tightly packed particles unlike liquids and gases whose particles can move freely but rate of movement is highest in gas while compared to water

Answer:

The substance is a mixture

Explanation:

The question lets us know that when solvent X was used as the mobile phase, we obtained only one spot. This may deceive us into thinking that the substance is pure since a pure substance has only one spot on a chromatogram.

However, the same substance yields three spots with solvent Y. This shows that the unknown sample is a mixture of substances and solvent X was unable to fully separate the mixture.

Answer:

Ra,Ba,In,Sb,As,P hope this helps you out good luck

Answer:

A carbon atom has six protons. This means that a carbon atom also has

a) Six electrons

b) Six neutrons

Explanation:

Answer:

[tex]3.029\ \text{m/s}[/tex]

Explanation:

m = Mass of pendulum = 1 kg

L = Length of pendulum = 2 m

g = Acceleration due to gravity = [tex]9.8\ \text{m/s}^2[/tex]

h = Height of the pendulum = 0.468 m

[tex]\theta[/tex] = Angle of deflection = [tex]-40^{\circ}[/tex]

[tex]\cos\theta=\dfrac{L-h}{L}\\\Rightarrow h=L-L\cos\theta\\\Rightarrow h=L(1-\cos\theta)\\\Rightarrow h=2(1-\cos(-40))=0.468\ \text{m}[/tex]

The energy balance of the pendulum is as follows

[tex]mgh=\dfrac{1}{2}mv^2\\\Rightarrow v=\sqrt{2gh}\\\Rightarrow v=\sqrt{2\times 9.8\times 0.468}\\\Rightarrow v=3.029\ \text{m/s}[/tex]

The maximum velocity of this pendulum is [tex]3.029\ \text{m/s}[/tex].

Answer:

Max velocity = 3.03 m/s

Explanation:

Mgh = ½ mv2

(1 kg)(9.8 m/s2)(0.468 m) = ½ (1 kg) v2

2 x 4.5864 = ½ v2 x 2

√V2 = √9.1728

V = 3.03 m/s

I hope this helps!

Answer:

Explanation:

This happens when water is boiled. Boiling the water causes the precipitation of solid calcium carbonate or solid magnesium carbonate. This removes the calcium ions or magnesium ions from the water, and so removes the hardness.

Answer:

Trucks, airplanes, and trains are used to transport people and supplies from one place to another.

Explanation:

Answer:

C. 2,3,3,4-tetramethylhexane

Explanation:

Answer:

the volume of a object will go down but the density stays the same

Answer: 2.52*10^25

Explanation:

6.02214076*10^23 in 1 mole

According to Avogadro's number, there are  2.52 x 10²⁵ sulfur atoms present in 41.8 moles of sulfur.

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number.Mass/molar mass is nothing but number of moles .

Therefore, number of atoms=41.8×6.023×10²³=2.52×10²⁵ sulfur atoms.

Thus, there are 2.52 x 10²⁵ sulfur atoms present in 41.8 moles of sulfur.

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ6

Answer:

yes

Explanation:

Gas pressure is caused by the force exerted by gas molecules colliding with the surfaces of objects (Figure 5.2. 1). ... In fact, normal air pressure is strong enough to crush a metal container when not balanced by equal pressure from inside the container.

Answer: Yes Gas pressure is caused by the force exerted by gas molecules colliding with the surfaces of objects (Figure 5.2. ... In fact, normal air pressure is strong enough to crush a metal container when not balanced by equal pressure from inside the container

Explanation:

Answer: There are [tex]4.23\times 10^{-6}moles[/tex]  of [tex]CO_2[/tex]

Explanation:

According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.

To calculate the moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given molecules}}{\text {Avogadros number}}[/tex]

[tex]\text{Number of moles}=\frac{2.55\times 10^{18}}{6.023\times 10^{23}}=0.423\times 10^{-5}moles[/tex]

Thus there are [tex]4.23\times 10^{-6}moles[/tex]  of [tex]CO_2[/tex]

Answer: The molar mass of menthol is 156.15 g/mol

Explanation:

Depression in freezing point is given by:

[tex]\Delta T_f=K_f\times m[/tex]

[tex]\Delta T_f=T_f^0-T_f=2.84^0C[/tex] = Depression in freezing point

[tex]K_f[/tex] = freezing point constant = [tex]20.8^0C/m[/tex]

m= molality

[tex]\Delta T_f=K_f\times \frac{\text{mass of solute}}{\text{molar mass of solute}\times \text{weight of solvent in kg}}[/tex]

Weight of solvent (cyclohexane)= 25.0 g = 0.025 kg  

Molar mass of solute (menthol) = ?

Mass of solute (menthol) = 0.533 g

[tex]2.84^0C=20.8\times \frac{0.533}{xg/mol\times 0.025}[/tex]

[tex]x=156.15g/mol[/tex]

The molar mass of menthol is 156.15 g/mol

Answer:

true

Explanation:

true

Answers:

Option B. 4.

Explanation:

The visible spectrum of light emitted by a sample of active or excited hydrogen atoms splits into four wavelengths that are basically four distinct levels of energy in the visible region of the spectrum. There four different wavelengths are 410 nm, 434 nm, 486 nm, and 656 nm. These show for colors according to the spectrum and wavelength violet, blue, green, and red, where 656 nm wavelength is most intense on the spectrum.

The hydrogen atom has four energy levels in the visible region of the spectrum. Therefore, option (B) is correct.

The electromagnetic spectrum can be defined as the range of frequencies of electromagnetic radiation and their respective photon energies and wavelengths.

The electromagnetic spectrum has electromagnetic waves with frequencies ranging from one Hz to above 1025 Hz, corresponding to wavelengths. This frequency range is divided into separate bands: radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays.

Each band has different characteristics, such as interacting with matter, and its practical applications.  When a hydrogen atom emits a different color represents the energy of a different energy level in the visible region of the spectrum.

Therefore, the four colors red, blue-green, blue, and violet light emitted by a hydrogen atom, are of four energy levels in the visible region of the electromagnetic spectrum.

Learn more about electromagnetic spectrum, here:
https://brainly.com/question/18704022

#SPJ2

The molar volume of the gas : V = 447.993 L

Given

n = 1 mol

P = 0.05 atm

T = 273 K

Required

The molar volume

Solution

Ideal gas law :

PV=nRT

V = nRT/P

Input the value :

V = 1 x 0.08205 x 273 / 0.05

V = 447.993 L

Answer:

See explanation

Explanation:

Big Bang: During the big bang, elements were formed by the squeezing together of light nuclei. Hydrogen atoms were fused together to make helium,  lithium  and other light weight elements.

Stellar Nucleosynthesis: Stellar nucleosynthesis is the process by which elements are created within stars by combining the protons and neutrons together from the nuclei of lighter elements(Thoughtco). In the stars, hydrogen may be fused to give helium, lithium and other elements lighter than iron.

Supernova Nucleosynthesis: A supernova is a process in which a star releases a large amount of energy together with neutrons, hence elements that are heavier than iron, like uranium and gold, can be produced in the process.

Answer:

1.83 × 10³ cm²

Explanation:

Step 1: Given data

Surface area of a NBA basketball (A): 283 in²

Step 2: Convert "A" from square inches to square centimeters

In order to convert "A" from in² to cm², we need a conversion factor. In this case, we will use the conversion factor 1 in = 2.54 cm. Since "in" is raised to the power of 2, we will have to raise the conversion factor to the power of 2 as well.

283 in² × (2.54cm/1 in)² = 1.83 × 10³ cm²

Answer:

Due to drought in Florida, people were informed to minimize the use of water and certain rules were made regarding water usage.

Explanation:

A drought is a shortage in the water supply. The drought in Florida led to water restriction as it was a way to prevent the shortage of water in the long run. Florida experienced a drought and water restriction was used as a way to curtail further shortage of water.

New rules were made to prevent wastage of water such as limiting lawn watering to one day in a week, limiting of car washing, and homeowners were not allowed to do things that  can lead to an increase in water usage.

Answer:

Vapor pressure of solution → 151.1 Torr

Option 2.

Explanation:

Raoult's Law is relationed to colligative property about vapor pressure. A determined solute, can make, the vapor pressure of solution decreases.

ΔP = P° . Xm

where Xm is the mole fraction of solute, P° (vapor pressure of pure solvent)

and ΔP = Vapor pressure of pure solvent - Vapor pressure of solution.

In order to determine the vapor pressure of solution, we need to determine, the vapor pressure of B and A in the solution

B's pressure = P° B . Xm

When we add A to B, A works as the solute and B, as the solvent.

Vapor pressure of pure B is 135 torr. (P° B)

In order to determine, the Xm, we use the moles of A and B

Xm = 5.3 mol of B / (1.28 + 5.3) → 0.806

B's pressure = 135 Torr . 0.806 → 108.81 Torr

If mole fraction of B is 0.806, mole fraction for A (solute) will be (1 - 0.806)

A's pressure = 218 Torr . 0.194 → 42.3 Torr

Vapor pressure of solution is sum of vapor pressures of solute + solvent.

Vapor pressure of solution = 42.3 Torr + 108.81 Torr → 151.1 Torr

Answer:

Potential energy. Kinetic energy can be stored. ... If we drop the object from the shelf or release the spring, that potential energy is converted back into kinetic energy. Kinetic energy can also be transferred from one body to another in a collision, which can be elastic or inelastic.

Answer:

The metallic oxide is Li₂O

Explanation:

Let the metallic oxide be M₂O

Thus;

M₂O + H₂ = 2M + H₂O

Molar mass of M₂O = (2x + 16)

We assumed Molar mass of M to be x.

We are told that 5.00 g of the metallic oxide produces 2.32 g of the metal.

By proportion, we can write the following;

5g of M₂O × (1 mole of M₂O/(2x + 16)) × (2 moles of M/1 mole of M₂O) = 2.32 g of M × 1 mole of M/x g of M

This cancels out to give us;

10/(2x + 16) = 2.32/x

Cross multiply to get;

10x = 2.32(2x + 16)

10x = 4.64x + 37.12

10x - 4.64x = 37.12

5.36x = 37.12

x = 37.12/5.36

x = 6.925 g/mol

The metal with a molar mass closest to this value of x is Lithium which has a molar mass of 6.94 g/mol

Thus the metal is Lithium and as such the metallic oxide is Li₂O