Answer:
a = 0.0505 [m/s^2]
Explanation:
In order to solve this formula we must use the following formula of kinematics.
[tex]x=(v_{o} *t)+(\frac{1}{2} )*a*t^{2}[/tex]
where:
x = distance = 50000 [m]
Vo = initial velocity = 0
a = acceleration [m/s^2]
t = time = 23 [min] = 1380 [s]
Note: the positive sign in the above equation shows that the car accelerates.
50000 = (0*1380) + (0.5*a*1380^2)
a = 0.0525 [m/s^2]
But we can calculate the acceleration using the following formula:
[tex]v_{f} =v_{o} +a*t[/tex]
where:
Vf = final velocity = 67 [m/s]
67 = 0 + (a*1380)
a = 0.0485 [m/s^2]
We can see that by means of kinematics and with the given values we can find two values of accelerations, however, we can determine the average acceleration, by means of the mathematical average.
a = (0.0485 + 0.0525) / 2
a = 0.0505 [m/s^2]
An astronaut is floating in space. There is no rope connecting him to the ship. They have some tools and a
fire extinguisher.
Which action could propel the astronaut back to the ship? (Select two answers)
He could spray the fire extinguisher in the opposite direction of the ship
He could throw a tool in the opposite direction of the ship
He could throw a tool toward the ship
He could point the extinguisher towards the ship and spray it.
Answer:
It's A it is correct trust me and no I didn't copy the other person I just read the answers.
Hope this helps:)
Explanation:
Which chemical equation represents a synthesis reaction
Answer:
C
Explanation:
i think its C, not too sure
a cue ball strikes an 8 ball of equal mass, which is initailly at rest. the cue ball stops and the 8 ball moves forward with a velocity equal to the intial velocity of cue ball. is the collsiion elastic
The collision is elastic:
In all elastic collisions of that type (unidirectional) the velocity of approach equals the velocity of separation - the collision is elastic even for different masses
e = relative velocity after / relative velocity before
e = 1 for elastic collisions
Freebie/Answered: As part of an experiment, a student wraps a wire in an electric circuit around an iron core, producing a magnetic field. Which phrase best describes the resulting apparatus?
Answer:
An electromagnet
Explanation:
The rest of the answers
adding more cells
As currents increases, the magnetic fuel strengths increases.
They both have north and south magnetic poles.
A current will be induced in the coil of wire.
Answer:
Number three is The current increases as the magnet's movement remains the same
Explanation:
8. When wind dies down or stops blowing
happens.
Answer:
Deposition
Explanation:
Deposition occurs when water slows or ceases moving, the wind dies or stops blowing, or glaciers melt. The deposited material can also be used to construct new landforms. Waves, for example, can dump sediment in places offshore, where it might accumulate to form sand dunes.When the wind calms down or vegetation stops or slows the breeze, the sediment particles begin to fall. Water is another factor that may erode, move, or deposit sediment. Flowing water is a key erosive agent. Water transports dirt and rock fragments as it moves. Warm, wet air will not travel if wind systems are not present. Water will still evaporate, but it will not move, therefore everywhere else than a major body of water will dry up. Lakes may be fine since evaporating water will flow back into them, and the sea will be fine, but everywhere else will become extremely dry very rapidly. Wind is constantly blowing somewhere on the world at any given time. Winds are usually quiet near the middle of a high pressure system. Wind is the passage of air from a high pressure location to a low pressure area.... So essentially air is always moving. Weathering and erosion are caused by wind. Weathering is caused by wind blowing debris against cliffs and huge rocks. This wears down the rock, reducing it to sand and dust. Sand and dust are also eroded by wind. 2. Rocks are tough and durable, but they don't last forever. Weathering and erosion are processes that occur as a result of forces such as wind and water breaking down rocks. Weathering is the process through which rocks deteriorate. Weathering is caused by a variety of factors, including climate change.
Deposition occurs when wind dies down or stops blowing happens.
What is deposition?Deposition refers to the depositing of sediment carried by wind, flowing water, the sea, or ice. Sediment can be carried in the form of pebbles, sand, and mud, or as salts dissolved in water. Organic activity may later deposit salts.
The fractured rock fragments or soil particles are accumulated in an environment where the energy of the flowing river is reduced. It settles the particles, which compact and form sedimentary rocks over time.
Deposition can occur when a river enters a shallow area of water or when the volume of water decreases, such as after a flood or during a drought. Deposition is common at the mouth of a river near the end of its journey.
Thus, the answer is deposition.
For more details regarding deposition, visit:
https://brainly.com/question/13475951
#SPJ2
According to Newton’s first law of motion, what will an object in motion do when no external force acts on it?
come to a stop
move at the same velocity
speed up
change direction
Answer:
move at the same velocity
Explanation:
Newton's first law states that if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force.
Answer:
move at the same velocity
Explanation:
A satellite orbiting Earth at a velocity of 3700 m/s collides with a piece of
space debris traveling at 6000 m/s. If the objects have the same mass and
the space debris has a velocity after collision of 3700 m/s, what is the
velocity of the satellite after the collision?
A. 3000 m/s
B. 6000 m/s
c. 5000 m/s
D. 4000 m/s
Answer: B
Explanation:
You can use the conservation of momentum, under the assumption that no mass was lost when the collision occurred. The initial momentum of the system must equal the final momentum of the system. Our system is the region including, and only including, the satellite and the space debris. Classical momentum is defined as the product of mass and velocity:
[tex]p_i=p_f[/tex]
[tex]m_1v_1_i+m_2v_2_i=m_1v_1_f+m_2v_2_f[/tex]
Due to mass 1 equaling mass 2, we can factor these quantities out:
[tex]m(v_1_i+v_2_i)=m(v_1_f+v_2_f)[/tex]
Cancel the mass term on both sides to get:
[tex]v_1_i+v_2_i=v_1_f+v_2_f[/tex]
We have the initial and final velocities for everything besides the final velocity of the satellite. Plug everything in:
[tex]3700m/s+6000m/s=v_1_f+3700m/s[/tex]
[tex]v_1_f=6000m/s[/tex]
[tex]hello \: [/tex]
[tex]good \: evening[/tex]
[tex]what \: is \: acceleration[/tex]
Have a great day.
Answer:
acceleration, rate at which velocity changes with time, in terms of both speed and direction. A point or an object moving in a straight line is accelerated if it speeds up or slows down. Motion on a circle is accelerated even if the speed is constant, because the direction is continually changing. For all other kinds of motion, both effects contribute to the acceleration.
Because acceleration has both a magnitude and a direction, it is a vector quantity. Velocity is also a vector quantity. Acceleration is defined as the change in the velocity vector in a time interval, divided by the time interval. Instantaneous acceleration (at a precise moment and location) is given by the limit of the ratio of the change in velocity during a given time interval to the time interval as the time interval goes to zero (see analysis: Instantaneous rates of change). For example, if velocity is expressed in metres per second, acceleration will be expressed in metres per second per second.
Explanation:
A supply capsule w/ crew approaches a spy satellite at a relative speed of 0.250 m/s so as to dock. The astronauts will then repair said spy satellite. The supply capsule has a mass of 4000 kg, and the spy satellite has a mass of 7500kg. a. Calculate the final velocity (after docking) by using the frame of reference in which the Spy satellite appears to be originally at rest. b. What is the loss of kinetic energy in this inelastic collision
The final velocity and the loss of kinetic energy is mathematically given as
vf = 0.087 m/sL-K.E= 81.5 JWhat are the final velocity and the loss of kinetic energy?
Question Parameters:
Generally, the equation for the conservation of momentum is mathematically given as
m1v1 = m2v2
(7500 + 4000) * vf = 4000 * 0.250
vf = 0.087 m/s
b)
Generally, the equation for the loss of kinetic energy is mathematically given as
loss in kinetic energy = initial kinetic energy - final kinetic energy
Therefore
L-K.E= 0.50 * 4000 * 0.25^2 - 0.50 * (4000 + 7500) * 0.087^2
L-K.E= 81.5 J
In conclusion, the final velocity and the loss of kinetic energy
vf = 0.087 m/s
L-K.E= 81.5 J
Read more about Motion
https://brainly.com/question/605631
A force of 10 n acts on a mass of 5 kg producing an acceleration of 1.5 m/s2 what is the magnitude of the force of friction acting on the mass
Given the force applied, the magnitude of the force of friction acting on the mass is 2.5 Newton
Given the data in the question;
Force acting on the object; [tex]F = 10N[/tex]Mass of the object; [tex]m = 5kg[/tex]Acceleration of the object; [tex]a = 1.5 m/s^2[/tex]Force of friction acting on the mass; [tex]F_k = \ ?[/tex]To determine the magnitude of the force of friction acting on the mass,
From Newton's laws of motion
[tex]F = m\ *\ a[/tex]
Where F is the force applied, m is the mass of the object and a is the acceleration of the object.
Now, we know that Kinetic Friction is always opposite of the direction of motion.
So, in the question, the force applied overcomes the friction to produce an acceleration of [tex]1.5 m/s^2[/tex]
Hence
[tex]F = F_k + ma[/tex]
Where [tex]F_k[/tex] is the kinetic friction
Now, we substitute our given values into the equation
[tex]10N = F_k +\ ( 5kg\ *\ 1.5m/s^2)\\\\10N = F_k +\ 7.5kg.m/s^2[/tex]
We know that, A newton is defined as [tex]1 kg.m/s^2[/tex]
Hence;
[tex]10N = F_k\ *\ 7.5N\\\\F_k = 10N \ -\ 7.5N\\\\F_k = 2.5N[/tex]
Therefore, given the force applied, the magnitude of the force of friction acting on the mass is 2.5 Newton.
Learn more; https://brainly.com/question/22009186
what is the acceleration of a 10 kg mass pushed by a 5 newton force?
Answer:
0.5 m/s²
Explanation:
F=ma
F is force
m is mass
a is acceleration
F=ma
5 = 10 x a
a = 5/10
a = 0.5 m/s²
6). How does adding thermal energy affect a gas?
Answer:
When heat is added to a substance, the molecules and atoms vibrate faster. As atoms vibrate faster, the space between atoms increases. The motion and spacing of the particles determines the state of matter of the substance. ... Solids, liquids and gases all expand when heat is added.
An 9.20 kg ball, hanging from the ceiling by a light wire 130 cm long, is struck in an elastic collision by a 2.80 kg ball moving horizontally at 3.50 m/s just before the collision. Find the tension in the wire just after collision.
The tension in the wire is caused by the elastic collision between the balls and the magnitude of this tension is determined as 18.81 N.
Speed of the balls after the collisionThe speed of the balls after the collision is determined by applying the principle of conservation of linear momentum as shown below.
m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
9.2(0) + 2.8(3.5) = 9.2v₁ + 2.8(v₂)
9.8 = 9.2v₁ + 2.8v₂ -----(1)
One - directional linear velocityu₁ + v₁ = u₂ + v₂
0 + v₁ = 3.5 + v₂
v₂ = v₁ - 3.5 ---(2)
Substitute (2) into (1)
9.8 = 9.2v₁ + 2.8(v₁ - 3.5)
9.8 = 9.2v₁ + 2.8v₁ - 9.8
19.6 = 12v₁
v₁ = 19.6/12
v₁ = 1.63 m/s
Tension on the wirev = √T/μ
v² = T/μ
T = v²μ
where;
μ is mass per unit length of the wire = 9.2/1.3 = 7.08 kg/m
T = (1.63²) x 7.08
T = 18.81 N
Thus, the tension in the wire just after collision is 18.81 N.
Learn more about tension in wires here: https://brainly.com/question/14336853
The most massive piece of equipment ever carried by a plane was a 1.24 × 105 kg generator built in Germany in 1993. How far above the ground was the generator when the potential energy associated with it was 9.17 × 108 J?
The generator was 754.6 meter far above the ground when the potential energy associated with it was 9.17 × 10⁸ J.
What is potential energy?Potential energy in physics is the energy that an item retains as a result of its position in relation to other objects, internal tensions, electric charge, or other elements.
The gravitational potential energy of an item, the elastic potential energy of a stretched spring, and the electric potential energy of an electric charge in an electric field are examples of common types of potential energy.
Mass of the equipment : M = 1.24 × 10⁵ kg.
The potential energy associated with it was: E = 9.17 × 10⁸ J.
Acceleration due to gravity: g = 9.8 m/s².
Hence, The height of the equipment = 9.17 × 10⁸ J ÷ ( 1.24 × 10⁵ kg×9.8 m/s²)
= 754.6 meter.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ2
HELP QUICK
What is the correct definition of the word clan?
a.
a cluster of multistory structures made out of adobe
b.
a large family, or group of families, related through common ancestory
c.
a portable dome or arch shaped home made out of wooden sticks and covered in animal skin, mud, or grass
d.
religious leader who was believed to have the power to heal as well as predict and control future events
Answer:
The answer is B.
Explanation:
A Clan is usually just one family, but can be multiple families that are related. They were usually very close knit. Sometimes a clan is also a group of people with a common interest.
A body initially at rest is accelerated at the rate of 0.2m/s for 5 seconds under contant force of 50 N. Calculate the workdone on the body
Answer:
the correct answer is 125 joule
what are differences between an entrepreneur and an employee
5. A car travels at a constant speed of 20 m/s around a horizontal circular track of radius 80 m. The tires roll without slipping. We can conclude that the coefficient of static friction between the tires and track:
Answer:
.5
Explanation:
First we define the variables
v=20
r=80
Next we construct our formula, since our tires do not slip, our centripetal force is equal to our friction
ma=mg*u
We calculate our centripetal force through finding our acceleration (v^2/r) and assuming our mass is a variable m (we cancel it out later).
mv^2/r = mg*u
All we have left is substitution and simplification
400m/80=mg*u
5=g*u
G is our gravitational acceleration (I will use 10, use 9.8 instead if you prefer)
5=10*u
u=.5
a
Gold-198 has a half-life of approximately 3 days. If a 100g sample of gold-198 decays for
9 days, approximately how much gold-198 remains in the sample?
o 13 g
o 25 g
o 33 g
o 50g
Answer:
13 g
Explanation:
Gold-198 has a half-life of approximately 3 days. If a 100 g sample of gold-198 decays for 9 days, approximately how much gold-198 remains in the sample?
13 g
A dragster crosses the finish line with a velocity of 140m/s . Assuming the vehicle maintained a constant acceleration from start to finish, what was its average velocity for the race?
Answer:
Answer is attached
The average velocity for the race is 70 m/s if the dragster crosses the finish line with a velocity of 140 m/s.
What is linear acceleration?It is defined as the rate of change in linear velocity with respect to time. It is also known as linear acceleration.
It is given that:
A dragster crosses the finish line with a velocity of 140m/s.
The vehicle maintained a constant acceleration from start to finish.
As we know,
The average velocity can be given as:
V(avrg) = (v1 + v2)/2
v1 = 140 m/s
v2 = 0 m/s
v(avrg) is the average of the velocity.
V(avrg) = (140 + 0)/2
V(avrg) = 140/2
V(avrg) = 70 m/s
Thus, the average velocity for the race is 70 m/s if the dragster crosses the finish line with a velocity of 140 m/s.
Learn more about linear acceleration here:
brainly.com/question/408236
#SPJ2
An archerfish, peering from just below the water surface, sees a grasshopper standing on a tree branch that's just above the water. The archerfish spits a drop of water at the grasshopper and knocks it into the water. The grasshopper's initial position is 0.45 m above the water surface and 0.25 m horizontally away from the fish's mouth. The launch angle of the drop is 630 with respect to the water surface.
A. Find an expression for how fast the drop is moving when it leaves the fish's mouth. (Your expression should only contain symbols of physical quantities. No numbers are needed here. )
B. Find the numerical value for how fast the drop is moving when it leaves the fish's mouth. (Plug the values of physical quantities into your expression from part A (do not forget units!) Evaluate your answer that you found in part B by using it to find the value of a physical quantity given in the problem statement. (This is called evaluating for consistency.) For instance, suppose you knew the initial speed of the water (i.e., your answer in part B), the launch angle ( 63º) and the grasshopper's initial horizontal position (0.25 m). Using this information, find the initial vertical position of the grasshopper. Is this value consistent with the value given in the problem statement?
Answer:
Explanation:
Let the required velocity be V at angle θ with the horizontal . Let time taken in the whole process be t
horizontal component = v cosθ
It will cover .25 m at this velocity
vertical component = v sinθ
It will cover .45 m with this initial velocity and with deceleration g .
v cosθ t = .25
.45 =v sinθ t - 1/2 g t²
putting the values of t from above
.45 = .25 tanθ - g .25² / 2 v² cos²θ
B ) putting the values of θ
.45 = .25 tan63 - 9.8 x .25² / 2 v² cos² 63
.45 = .49 - 1.53 / v²
1.53 / v² = .04
v² = 38.25
v = 6.18 m /s
time taken to cover distance of .25 m
t = .25 / 6.18 cos63 = .089 s
during this period , vertical displacement
= 6.18 sin 63 x .089 - 1/2 x 9.8 x .089²
= .4895 - .04 = .45 m which is consistence with given height .
How is the gravitational force related to the distance between two objects?
S
It is directly proportional to the square of the distance.
It is inversely proportional to the square of the distance.
it is directly proportional to the distance.
it is inversely proportional to the distance.
gravitational force is inversely proportional to the square of the separation distance between the two interacting objects
Gravitational force is inversly proportional to the square of the distance. Option B is correct.
What is gravitational force?Newton's law of gravity states that each particle having mass in the universe attracts each other particle with a force known as the gravitational force.
Gravitational force is proportional to the product of the masses of the two bodies and inversely proportional to the square of their distance.
[tex]\rm F=G\frac{mM}{R^2}[/tex]
Gravitational force is inversly proportional to the square of the distance.
Hence option B is correct.
To learn more about the gravitational force refer to the link;
https://brainly.com/question/24783651
which equation can be used to solve for acceleration?
Answer:
the answer is the first one.
Explanation:
one way to find out is if you look at the other equations they are mixed matched. For an example a=d/t should be s= d/t.
Answer:
a
Explanation:
i did it
Question 10 of 13
The majority of your documentation is done in Process Interventions
True
False
This answer is true but in other contexts it can be false
If 10 waves come in every 8 seconds with a wavelength of 2 meters, what is the frequency?
Answer:
Explanation:
frequency = 10/8 = 1.125 Hz
when jogging outside you accidentally bump into a curb. Your feet stop but your body continues to move forward and you end up on the ground. Which law of motion is being described in the scenario?
a) law of universal gravitation
b) Newton’s first law of motion
c) Law of conservation of energy
d) newton’s second law of motion
Which bWhich piece of furniture will have the most inertia and give the furniture movers the most difficulty in moving?
a 50kg couch
a 5kg dining chair
a 75kg dining table
an 10kg end tableest describes friction?
Answer:
The answer is C: a 75kg dining table
Explanation:
Took it on the Unit Test: 2020
A 1,120 kg car is traveling with a speed of 40 m’s .find it.s energy
Answer:
896000 Joule.
Explanation:
Solution,
Given,
Mass (m) = 1,120 kg.
Velocity (v) = 40 m/s.
Now,
Kinetic Energy = 1/2mv²
= 1/2 × 1,120 × 40²
= 896000 Joule.
If you apply a force of 200N to an object with a mass of 50kg, what will the acceleration be?
Answer:
Acceleration = 4 m/s
Explanation:
Acceleration = force divided by mass
So;
a = 200 ÷ 50 = 4
A train that travels 100.0 kilometers in 4.0 hours is traveling at what speed?
Answer:
25 kilometers an hour.
Explanation: Since there is 100 kilometers, you dived it by four hours and you get the kilometers per hour.
Answer:
25 kmph
Explanation:
100 divided by 4 is 25
hope it helps