A quanta of electromagnetic energy is called *

A chemical equation shows the reactants (left side) and products (right side) in a chemical reaction.

To learn more   about compounds refer to:

https://brainly.com/question/26487468

#SPJ1

To find partial pressure from mole fraction, we have to multiply mole fraction with total pressure in the event.

The formula for partial pressure is expressed as Pfraction = molefraction x Ptotal. Partial pressure is the result of multiplying the mole fraction by the total pressure. Let's look at the example below to make it simpler for you to understand:

Consider a chamber with 2.611 atm of pressure, 24.2 g of He, and 4.32 g of O₂. In this instance, we must first get the mole fraction before calculating the partial pressure.

24.2 g Neon x 1 mol Neon / 20.18 g Neon = 1.199 mol Neon

4.32 g Oxygen x 1 mol Oxygen / 31.998 g O₂ = 0.135 mol Oxygen.

Total moles =  1.199 x 0.135 = 1.334 mol gas

Mole fraction Ne = 1.199 mol/1.334 mol = 0.899

Mole fraction O₂ = Oxygen: 0.135/1.334 = .101

Then find the partial pressure

PNe = mole fraction Ne x Ptot = 0.899 x 2.611 atm = 2.35 atm

PO2 = mole fraction O ₂ x Ptot = 0.101 x 2.611 atm = 0.264 atm

Learnn more about partial pressure here

brainly.com/question/14119417

#SPJ4

Yes, it is the right response. Although the elements are imaginary, they resemble actual elements .Nomenclature is an organism name system used in biological classification.

The Latin words nomen (name) and calare (to call) are the source of the word nomenclature. Both the Latin word nomenclatura and the English word nomenclator, which also denotes a source or broadcaster of names, relate to a list of names.

Nomenclature is an organism name system used in biological classification. Genus & species names, two Latinized nouns drawn from numerous sources, serve as indicators of the species whereby the creature belongs.

To know more about nomenclature visit:

https://brainly.com/question/15324006

#SPJ1

The structure of 1,5-dichloro-3-hexyme consists a six-carbon atom long chain with a triple bond at the third carbon and two chlorine (Cl) atoms attached at the first and fifth carbon positions.

Alkynes are classified into two types. The first has a triple bond at the ends of the carbon chain and is known as a terminal alkyne, while the second has a triple bond somewhere inside the longest carbon chain and is known as internal alkyne.

In the structure of 1,5-dichloro-3-hexyme, the term "3-hexyme" refers to an alkyne with a triple bond between the third and fourth carbon atoms in the longest chain, and "1,5-dichloro" refers to the presence of two chlorine atoms at the first and fifth carbons.

The skeletal structure of 1,5-dichloro-3-hexyne is shown below.

Learn more about alkynes here:

https://brainly.com/question/23508203

#SPJ4

A model that shows how electrons orbit atom nuclei is known as an electronic configuration diagram.

The number of protons in an atom's nucleus or the number of electrons in an electrically neutral atom is the atomic number of that element. The capital letter Z is used to represent it. Atomzahl, a more contemporary word for atomic number in German, is where the letter Z gets its name.

Electrons are arranged around the central nucleus in energy levels, or shells, and are shown as dots or crosses. It  known as electrodot diagrams display the distribution of an atom's valence electrons as dots around the element's symbol.

Learn more about electronic configuration here:

brainly.com/question/29757010

#SPJ1

The difference between those two is there is  a mol or mass ratios of the element in the composition and moll or mass ratio of compounds in the reaction at balanced equations.

Stoichiometry is an event of chemistry that happen using relationships between products and/or reactants in a certain chemical reaction to find out desired quantitative data. The word of stoichiometry based on Greek language, in Greek, "stoikhein" has a meaning "element" and "μέτρον" read as "metron" means "measure", so, based on its word definition, stoichiometry is a quantify of element.

Learn more about stoichiometry here

https://brainly.com/question/16060223

#SPJ4

The number of mole of Al₂O₃ formed when 4.0 moles of O₂ reacts, given the reaction is 2.67 moles

From the given stoichiometry of the reaction (i.e 6.0 moles of Al reacts with 4.0 moles of O₂ to form Al₂O₃), we can see that O₂ is the limiting reactant.

Knowing that O₂ is the limiting reactant we can easily determine the number of moles of Al₂O₃ formed when 4.0 moles of O₂ reacts as follow:

4Al + 3O₂ -> 2Al₂O₃

From the balanced equation above,

3 moles of O₂ reacted to produce 2 moles of Al₂O₃

Therefore,

4 moles of O₂ will react to produce = (4 moles × 2 moles) / 3 moles = 2.67 moles of Al₂O₃

Thus, we can conclude from the above calculation that the number of moles of Al₂O₃ formed is 2.67 moles

Learn more about number of mole:

https://brainly.com/question/23350512

#SPJ1

Answer: 2.67

Explanation:

Semiconservative replication is a type when DNA replication is complete the end result is two identical molecules that are each half old and half original strand

Having one strand makes it feasible to replicate the other strand since the two strands complement one another. According to this concept of replication, the double helix's two strands separate during the replication process and each one acts as a template from which the next complimentary strand is copied.

Each of the two strands that make up the double helix acts as a template from which new strands are copied during DNA replication. The parental or "old" strand and the new strand will complement one another. One new daughter strand and one new parental strand make up each new double strand. Semiconservative replication is what is meant by this. When two DNA copies are created, they are equally divided into two daughter cells and have an identical nucleotide base sequence.

To look more about Replication click here

brainly.com/question/13685752

#SPJ4

The abundance diagram is as attached in the image.

The approximate pH of a solution of 1.00 M CH3COOH is less than 4.74.

In chemistry, pH, which originally stood for "potential of hydrogen," is a scale used to determine the acidity or basicity of an aqueous solution. Acidic solutions (solutions with greater H+ ion concentrations) have lower pH values than basic or alkaline solutions.

The pH scale may be traced back to a collection of standard solutions whose pH has been determined by worldwide agreement.

The potential difference between a hydrogen electrode and a standard electrode, such as the silver chloride electrode, is measured in a concentration cell with transference to derive primary pH standard values.

A glass electrode with a pH metre, or a color-changing indicator, can be used to test the pH of aqueous solutions. pH measurements are critical in chemistry, agronomy, medicine, water treatment, and a variety of other fields.

To learn more about pH of solution, here

https://brainly.com/question/9361207

#SPJ4

Acetone, (CH3)2CO, has 3 sp3 hybridized carbon atoms and 1 sp2 hybridized oxygen atom, according to VSEPR theory. The carbon atoms are tetrahedral and oxygen atom is trigonal planar in shape.

i) Using VSEPR theory, we can predict the arrangement of electron pairs around the atoms in a molecule. The Lewis structure of acetone shows that the carbon atoms have four electron pairs around them (two from the single bonds and two from the double bond) and the oxygen atom has two electron pairs around it.

The carbon atoms are all sp3 hybridized, and the oxygen atom is sp2 hybridized.

ii) The three carbon atoms in acetone each have four electron pairs around them, which means they are tetrahedral in shape. Therefore, they are all sp3 hybridized. The oxygen atom has two single bonds and one double bond around it, which means it is trigonal planar in shape. Therefore, it is sp2 hybridized.

To know more about VSEPR theory click below:

https://brainly.com/question/28775578#

#SPJ4

An ozone molecule which contains one single bond and one double bond. This statement best describes an  [tex]O_{3}[/tex] molecule.

Ozone molecule is a special oxygen molecule with having three oxygen atoms. It is referred as [tex]O_{3}[/tex]. The shape of the molecule is bent or linear. The electron non-bonding domain takes up a space, making the molecule bent. Ozone molecules are less stable than  molecules. Ozone has a resonance structure and the average bond is 1.5. Bond order will provides the number of bonds which is present in a given molecule. The steric hindrance inhibits it from forming a triangular structure, with each  atom forming a predictable bonds.

To know more about molecule here

https://brainly.com/question/19922822

#SPJ4

The formula in Excel to verify the lowest value of your data range, is with the MIN function.

Its syntax is as follows: MIN (number1, [number2], ...) number1, [number2], ... is the series of values from which you want to obtain a minimum.

The MIN function can be used to find the smallest value in a column or in a group of cells. This function is especially useful for finding the minimum value in a data set that contains numeric values. Additionally, it can also be used to find the minimum of other types of values such as dates, times, and text.

The MIN function can be used to find the minimum value in a column as well as in a row. This means that it can be used to find the minimum value in an entire data table. It is also possible to find the minimum value in a specific subquery.

Learn more about The MIN function Excel:

https://brainly.com/question/11385568

#SPJ4

The elements highlighted in red have the same number of electron shells

in common. The correct answert is D.

A row of chemical elements makes up a period in the periodic table. The number of electron shells is the same for every atom in a row. Periods are the horizontal divisions or rows in the periodic table, and groups are the vertical divisions or columns.

Periods are shown in the table from top to bottom, numbered 1 through 7. Because they have the same number of orbitals, elements with the same period have identical masses but different characteristics. In other words, the electrons on the same outermost level, which is precisely the number that distinguishes each period, are a characteristic of the elements of a certain period. For instance, the third period elements have electrons up to level three.The number of the energy level increases as the periodic table's period numbers do.

The items with a red highlight share the trait of being from the same period, which is period two. As a result, electrons can now reach level 2.

Learn more about periods at https://brainly.com/question/2396573

#SPJ4

Based on the equation of the reaction;

a) The oxidation states of each of the atoms in the compounds are given below:

(b) The atom that gets oxidized is Pb and the atom that gets reduced is Pb in PbO₂

(c) The reactant that is the oxidizing agent is PbO₂ and the reactant that is the reducing agent is Pb.

An oxidizing agent is a substance that causes oxidation by accepting electrons from another substance in a redox reaction whereas, a reducing agent is a substance that causes reduction by losing electrons to another substance in a redox reaction,

In redox reactions, oxidizing agents are reduced while the reducing agents are oxidized.

A gain or loss of electrons results in a change in the oxidation states of elements.

Learn more about oxidizing and reducing agents at: https://brainly.com/question/18370994

#SPJ1

The mass in grams of 0.700 moles of water (H₂O) = 12.6g/mol (option C)

The mass of a chemical in a mole is known as its molar mass.

It is the total atomic mass of every element that is present in that molecule. The molar mass unit is g/mol.

Determine the molar mass of the water(H₂O):

Molar masses of 1 g/mol of hydrogen and 16 g/mol of oxygen make up a mole.

The chemical formula for water is H₂O.

The water's molar mass is thus:

H₂O = (2 x 1) + 16

= 18 g/mol

Moles of water = 0.700

The molar water (H₂O) mass = 18 g/mol

Object's mass is determined by:

m = (moles of the sample) x (molar mass of the compound)

So, mass of the water (H₂O):

= (0.700) x (18)

= 12.6 g/mol

Learn more about mass of the water here: https://brainly.com/question/26173436

#SPJ4

Balance equation is  2NaOH + H2SO4 → Na2SO4+2H2O.

1) N2O5 -> N2O4 + O2  Balance equation

N2O5 = N2O4 + 1/2O2 eq. as written

N two on left and two on right

O five on left and six on right. Easiest fix make 1/2O2. Now O five on left and five on right.

Or multiply each side by two to get.

2N2O5 = 2N2O4 + O2

N is 4=4 and O is 10=10

2) KNO3 -> KNO2 + O2 Balance equation

On heating potassium nitrate decomposes to produce potassium nitrite along with oxygen gas.

The balanced chemical equation of the reaction is as follows-

2KNO3 ->2 KNO2 + O2

3) NH4NO2 -> N2 + H2O  Balance equation

 NH4NO2=2H2O+N2

N-2,2 balanced

 H-4,4balanced

  O-2,2balanced

4)O3 -> O2 Balance equation

  is   2O3 = 3O2

5) Zn + AgCl -> ZnCl2 + Ag Balance equation

is Zn+2AgCl→ZnCl2+2Ag

6) NaOH + H2SO4 -> NA2SO4 + H2O  Balance equation

is 2NaOH + H2SO4 → Na2SO4+2H2O.

To learn more about Balance equations refer to:

https://brainly.com/question/2399130

#SPJ1

The mass of manganese dioxide produced from one mole or 18 g of water is 174 g. Then, MnO₂ produced from 445 gram of H₂O is 4300 g.

Permanganate MnO₄ is an ion from potassium permanganate. It is an oxidizing agent.  MnO₄  easily reduces to MnO₂. As per the given reaction, 18 g is required by one mole or 174 g of MnO₂.

Molar mass of MnO₂ = 87 g/mol

molar mass of water = 18 g/mol

mass of 2 moles of MnO₂ = 174 g

Thus, 18 g of water gives 174 g of MnO₂.

Mass of MnO₂ produced from 445 g of  water = (445 × 174)/18 = 4300 g

Therefore, the mass of MnO₂ produced is 4300 g.

Find more on MnO₂:

https://brainly.com/question/28302133

#SPJ1

If a 10.0 g sample of cobalt -60 is left alone 0.63 g will be left after 21.2 years the half-life of cobaltt-60 is 5.3 years.

The term half life period is defined as the time required by a radioactive substance to transform into a different substance.

Given :

T = half life of cobalt-60

= 5.3 years

λ = decay constant for cobalt-60 = ?

decay constant is given as follows

λ = 0.693 / T

Substituting the given values

λ = 0.693/5.3

= 0.131

N₀ = initial amount of cobalt-60

= 10 g

t = time of decay

= 21.2 years

N = final amount of cobalt-60 after time "t"

final amount of cobalt-60 after time "t" is given as

N = N₀

Substituting given values

N = 10

N = 10 x 0.0622 g

N = 0.63 g

Thus, if a 10.0 g sample of cobalt -60 is left alone 0.63 g will be left after 21.2 years the half-life of cobaltt-60 is 5.3 years.

To learn more about the half life period, follow the link;

https://brainly.com/question/9654500

#SPJ1

When benzene has both a strong and weak activator group, only the strong activator guides the electrophile towards ortho or para to the that activator group.

Because they lack an electron, electrophiles can receive a pair of electrons from organisms that have an abundance of them. Examples include carbonyl compounds and carbocations. A nucleophile is a species that has an abundance of electrons and gives electron pairs to species that lack electrons. Carbanions, water, ammonia, cyanide ions, and others are examples.

A chemical species known as an electrophile in chemistry accepts an electron pair from nucleophiles to form bonds with them. Electrophiles are Lewis acids because they are electron-accepting molecules.

To know more about electrophile visit:

https://brainly.com/question/30026567

#SPJ4

The abiotic factors that influence dissolved oxygen include temperature, salinity, and sunlight.

What is an abiotic factor?

To learn more about an abiotic factor refer to:

https://brainly.com/question/1291145

#SPJ4

The sum of two or more other vectors is called the resultant.

The magnitude of the resulting vector is defined as the sum of two or more vectors (length).

A single vector that has the same effect as multiple additional vectors added together is referred to as a resultant vector.

The resultant vector formula can be used to get the resultant value of two or more vectors. This is done by computing the vectors according to how they are oriented in relation to one another. The resulting vector formula has numerous applications in science and engineering. This is demonstrated by showing how various force vectors interact with a body and then using this formula to determine the final vector.

Learn more about the resultant vector here: https://brainly.com/question/13310387

#SPJ4

26.7 moles of sodium bromide will produce 26.7 moles of silver bromide.

Sodium bromide is an inorganic compound with the chemical formula NaBr. It is a white, crystalline solid that is highly soluble in water. It is used in a variety of applications, including as a source of bromide ions in chemical synthesis, as a fire reta rdant, and as a disin fectant. It is also used in photography, medicine, and in the production of bromine compounds. In medicine, it is used as a sedative and anticonvulsant.

This is because the reaction between sodium bromide and silver nitrate is a 1:1 mole ratio reaction.
This means that for every mole of sodium bromide, one mole of silver bromide will be produced.
Therefore, 26.7 moles of sodium bromide will produce 26.7 moles of silver bromide.

To learn more about sodium bromide
https://brainly.com/question/15409724
#SPJ1

elements If Actions A and B exist independent, then P(A or Bi) = P(A) Plus P(B) - P(A or B) = 7/9 is the chance that either Incident A or Event B will occur.

It is crucial to remember that two mutually incompatible events cannot coexist unless one of them has a probability of occurring, as P (A B) = P (A) P (B) for independent events, and the sole way a product may equal zero is if either of the elements is also zero.

dependent occurrences When the result of the first event affects the result of the second event, two events are dependent. The likelihood of two connected events is the.

To know more about elements visit :

https://brainly.com/question/14347616

#SPJ1

Answer:

807 g = 4.9987 (Rounded Answer)

Explanation:

807 grams = 4.998680645628887 mol

Sandy soil would likely drain water the fastest.

Soil is composed of minerals, organic matter, water and gas. It is divided into three classes viz. sand, silt and clay.

The ability of a soil to absorb or drain water depends upon the pore size of the soil particles.

In case of clayey soil, the pore size is comparatively large than sandy soil so clayey soil will absorb the water molecules in its pores .On the other hand, the pore size of sandy soil is relatively small, so it cannot retain the water in its pores, hence it can drain water easily.

Due to this reason, sandy soil is usually used in filtration process.

To know more about sandy soil here

https://brainly.in/question/24372330

#SPJ4

The main distinction between composition and reaction stoichiometry is that while reaction stoichiometry relates to the number of compounds consumed or created during a chemical reaction, composition stoichiometry refers to the atomic makeup of a chemical compound.

The formulation is frequently referred to as a composition. Formulas are merely combinations of molecules that will combine to make plastics like polyesters, polyurethanes, and epoxies, among others.

The ratio of the reactive groups in the base resin to those in the hardeners is known as reaction stoichiometry. Each component resin and hardener reactive]'s equivalent weight is used to express this.

Know more about reaction stoichiometry

https://brainly.com/question/16060223

#SPJ4

The values of each type of energy the object has the child has both KE and GPE.

Energy is the capacity to do work or cause change. It is the ability to cause motion, create light and heat, and cause chemical reactions. Energy exists in many forms, such as mechanical, electrical, thermal, chemical, kinetic, and potential, and can be converted from one form to another. It is a fundamental part of physical and chemical processes, as well as biological processes.

Kinetic Energy (KE):
KE = 0.5•m•v2
KE = 0.5•15kg•(3m/s)2
KE = 22.5 J
Gravitational Potential Energy (GPE):
GPE = m•g•h
GPE = 15kg•9.8m/s2•2.5m
GPE = 367.5 J
Therefore, the child has both KE and GPE.

To learn more about energy
https://brainly.com/question/26724488
#SPJ1