A pot of water is heated on a gas-flame stove and begins to boil. Which two
transfers of thermal energy involved in this system are examples of radiation?
A. From the burner to a nearby spoon
B. In the surrounding air as air currents develop
I C. From the burner to air that is not touching it
D. From the water to the air
Answers
Answer:
a.) & d.)
Explanation:
It should ideally go from Mechanical, Electrical, thermal, light then chemical. I attached a similar example to better explain it.
The two transfers of thermal energy involved in this system are examples of radiation are From the burner to a nearby spoon and From the water to the air Hence, option a & d are correct
What is Heat Transfer ?
Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy between physical systems.
Heat transfer is classified into various mechanisms, such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes.
According to given question, Energy should ideally go from Mechanical, Electrical, thermal, light then chemical.
Therefore, The two transfers of thermal energy involved in this system are examples of radiation are From the burner to a nearby spoon and From the water to the air Hence, option a & d are correct
Learn more about Heat here ;
https://brainly.com/question/12947964
#SPJ2
Related Questions
C3H8 +5O2→ 3 CO2 + 4 H2O
In the reaction above, what is the total number of moles of reactants consumed when 1.00 mole of CO2 is produced?
a
0.33 mol
b
2.00 mol
c
1.33 mol
d
1.50 mol
Answers
Answer:
1.33
Explanation:
sorry if im wrong :(
How many grams are there in 1.18 X 1026 atoms of iridium?
Answers
Setting up a dimension analysis type of thing helps tremendously. See what you have to cancel in order to get what you want. We canceled the atoms, then we canceled the moles, and then we got grams.
What is a "control" in an experiment? *
Answers
Answer:
The factor that the person experimenting has control over
Explanation:
PLEZ HELP ANSWER. IM STUCK!
Answers
d. 3
Explanation:
because the valence electrons on O is 3
Which two factors can affect a solid solute's solubility
A. Whether the particles of the solute and solvent are charged
B. Pressure acting and solute
C. Length of time spent stirring
D. Temperatures of the solvent and solute
Answers
Answer:
A and D
Explanation:
It might seem like B and D but I took the test and it's A and D.
Answer:
Whether the particles of the solute and solvent are charged
Temperatures of the solvent and solute
Explanation:
A. Whether the particles of the solute and solvent are charged
B. Pressure acting and solute
C. Length of time spent stirring
D. Temperatures of the solvent and solute
Help me please !!!
Which of the following can be inferred from the diagram above that shows the dependence of potential Energy on the Internuclear distance between two atoms?
A)The atoms form a bond with a bond length of 25 pm
B)The atoms form a bond with a bond length of 75 pm
с)The net force between the atoms is attractive at 25 pm
D)The net force between the atoms is attractive at 75 pm
Answers
Answer:
B)The atoms form a bond with a bond length of 75 pm
what element can scratch a diomand?
Answers
Answer:
another diamond ....theres nothing else that can that I know of.
How much sunlight is there in the transition zone. For science.
Answers
Answer:
Transition zone of the sun
Explanation:
Transition Region - The transition region is a very narrow (60 miles / 100 km) layer between the chromosphere and the corona where the temperature rises abruptly from about 8000 to about 500,000 K (14,000 to 900,000 degrees F, 7700 to 500,000 degrees C).
Viruses and bacteria
Answers
Answer:
Whats the question lolzzzz
Explanation:
help please
1. Covalent Bonds are formed when atoms
A. Give Electrons
B. Share Electrons
C. Take Electrons
Answers
Answer:
b. share electrons
Explanation:
where were atoms formed ?
Answers
Answer:
They were formed right after the "Big Bang" when our known universe originated from pure energy some billions of years ago. The energy was converted to the elementary particles (quarks, gluons, leptons etc...) from which protons and neutrons were formed. From these, atoms of different elements were produced
Nitrogen (N) is element number 7 in the periodic table. It has a mass number of 14. Nitrogen
has gained 3 electrons. Nitrogen is a/an___.
a. Anion
bcation
c. Isotope
d. All of the above
Answers
The isotope Np-238 has a half life of 2.0 days if 96 grams of it were present on Monday how much will remain six days later
Answers
Answer:
12 grams
Explanation:
For any radioactive substance
the amount of substance left after n half life is given by = [tex]x/2^n[/tex]
where x the original amount of substance.
____________________________________________
Half life of isotope Np-238 = 2 days
total no of days = 6
no of half life =total no of days/Half life of isotope Np-238 = 6/2 = 3
thus,
for our problem n = 3
initial amount of Np-238 = 96 grams
thus,
the amount of substance left after 3 half life = 96/2^3 = 96/8 = 12 grams.
Thus, 12 grams will be left after six days.
A teacher puts two tablets in a glass of water. The teacher
stirs the water with a spoon until the tablets start to bubble.
Which of the following is LESS dense than water?
Answers
This question is incomplete because the options are missing; here are the options:
Which of the following is LESS dense than water?
The spoon
The glass
The tablets
The bubbles
The correct answer to this question is The bubbles
Explanation:
In general, the density of materials and substances affects their buoyancy. This implies in water less dense materials will float and those with higher density will sink. In the situation presented, the only element that is less dense than water are bubbles; this is shown by the movement of the bubbles as these originate in the bottom of the glass of water but they rise to the surface, which shows they are less dense than water.
Answer:
the bubbles
Explanation:
1 pts
Define valence electrons.
o Valence electrons are the electrons on the outermost energy level of an
atom.
o Valence electrons are the electrons on the innermost energy level of an
atom.
Valence electrons are the electrons in the middle energy level of an
atom.
Valence electrons are the electrons on the inside of the nucleus of the
atom.
Answers
Answer:
Valence electrons are the electrons on the outermost energy level of an
atom.
The correct answer will be Valence electrons are the electrons on the outermost energy level of an atom.
The man who was first to see living microorganisms in his pond water was who?
Answers
Which best describes a chemical reaction that follows the law of conservation of matter?
Group of answer choices
A. The reactants have the same mass as the products.
B. The reactants have the same density as the products.
C. The products conserve all chemical properties of the reactants.
D. The products conserve all physical properties of the reactants.
Answers
Water and chemical elements move through cycles called biogeochemical cycles. Select the best way to explain biogeochemical cycles. a. When chemicals move from the atmosphere to a living organism. b. When a chemical moves from an organism to the atmosphere then back to an organism. c. When organisms move from an organism to the atmosphere then back to an organism.
Answers
Answer:
When a chemical moves from an organism to the atmosphere then back to an organism.
Explanation:
If we look at it closely, geology and chemistry play major roles in the process of movement and recycling of inorganic matter between living organisms and their environment. This has been called the biogeochemical cycle.
Biogeochemical cycles involve movement of chemical elements among the biotic and abiotic components of the environment; from atmosphere to land to sea, and from soils to plants.
State the Periodic Law. Why is it so important in the study of chemistry?
Answers
Answer:
Summary. To summarize, the periodic table is important because it is organized to provide a great deal of information about elements and how they relate to one another in one easy-to-use reference. The table can be used to predict the properties of elements, even those that have not yet been discovered.
What element has the noble gas configuration [Ar]4s23d8
Answers
Answer:
argon
Explanation:
Answer:
Argon
Explanation:
which element has a grater atomic radius ?phosphorus or bismuth ?
Answers
Answer:
hello
Explanation:
bismuth has the greatest atomic radius.
To which family on the Periodic Table does this Bohr Model belong?
Answers
Answer:
As the valance shell have 7 valance electrons .
It belongs to halogen family (group 17).
How many molecules are in 2,10 mol CO2?
0 3.79 X 1024 molecules
O 2.53 x 1024 molecules
O 1.26 X 1024 molecules
O 3.49 * 10-24 molecules
Answers
Answer:
the answer is the 3rd option
Explanation:
which is 1.26 x 1024 calculating with avogardos law
Answer:
1.26 X 1024 molecules
Explanation:
PLEASE HELPP THIS IS DUEE!!!
Answers
Answer:
that's so easy but if you still need the answer i am willing to help
Explanation:
Osmosis is the movement of molecules across a cell membrane. Why does this help
maintain homeostasis?
Answers
Explanation:
Osmosis helps maintain homeostasis by maintaining concentration of solvents and solutes constant inside cells.
Alveolar air (a mixture of nitrogen, oxygen, and carbon dioxide) has a total pressure of 0.998 atm. If the partial pressure of oxygen gas is 0.198 atm and the partial pressure of nitrogen gas is 0.770 atm, what is the partial pressure of carbon dioxide in millimeters of mercury?
Answers
Answer:
22.8 mmHg
Explanation:
According to Dalton's law of partial pressures, the total pressure of a mixture of gases is obtained as the sum of the partial pressures if all the individual gases present in the mixture.
Since the total pressure of gases in the mixture is 0.998 atm, the partial pressure of carbon dioxide is;
PCO2 = [Ptotal - (PO2+ PN2)]
Hence;
PCO2 = [0.998 - (0.198 + 0.770)]
PCO2 = 0.03
Since
1 atm = 760 mmHg
0.03 atm = 0.03 × 760 /1
=22.8 mmHg
In a water molecule, oxygen attracts electrons more strongly
than the hydrogens do because an oxygen atom contains
more
in its nucleus.
Enter the answer
Answers
What amount of heat is required to raise the temperature of 250 grams of water by 20°C? The specific heat of water is 4180 J/Kg
Answers
Answer:
The statement means that in every interaction, there is a pair of forces acting on the two interacting objects. The size of the forces on the first object equals the size of the force on the second object. The direction of the force on the first object is opposite to the direction of the force on the second object. Forces always come in pairs - equal and opposite action-reaction force pairs.
Explanation:
The statement means that in every interaction, there is a pair of forces acting on the two interacting objects. The size of the forces on the first object equals the size of the force on the second object. The direction of the force on the first object is opposite to the direction of the force on the second object. Forces always come in pairs - equal and opposite action-reaction force pairs.
How would you calculate the gravitational potential energy of a 2 kg bottle of soda falling off of a kitchen table that is 0.76 m tall ?
Answers
Answer:
14.9 Joules .
Explanation:
P. E. = m g h
= 2 * 9.8 * 0.76
= 14.9 Joules to the nearest tenth.
Answer:
2*0.76*97
Explanation:
Convert 645 Newtons per quart to tons per liter. (The picture is a conversion table for help)
Answers
Answer:
0.067 ton/Litre.
Explanation:
645 Newtons per quart to tons per liter.
We'll begin by converting 645 Newton/quart to gram/quart (g/q). This can be obtained as:
1 N/q = 100 g/q
Therefore,
645 N/q = 645 N/q × 100 g/q / 1 N/q
645 N/q = 64500 g/q
Therefore, 645 Newton/quart is equivalent to 64500 grams per quart.
Next, we shall convert 64500 grams per quart to pounds per quart. This can be obtained as follow:
454 g/q = 1 pound/q
Therefore,
64500 g/q = 64500 g/q × 1 p/q / 454 g/p
64500 gram/quart = 142.07 pound/quart
Therefore, 64500 gram/quart is equivalent to 142.07 pound/quart.
Next, we shall convert 142.07 pound/quart to ton/quart. This can be obtained as follow:
2000 p/q = 1 ton/q
Therefore,
142.07 p/q = 142.07 pq × 1 ton/q / 2000 p/q
142.07 pound/quart = 0.071 ton/quart
Therefore, 142.07 pound/quart is equivalent to 0.071 ton/quart.
Finally, we shall convert 0.071 ton/quart to ton/litre. This can be obtained as follow:
1 ton/q = 1/1.06 ton/L
Therefore,
0.071 ton/q = 0.071 ton/q × 1/1.06 ton/L / 1 ton/q
0.071 ton/quart = 0.067 ton/Litre
Therefore, 0.071 ton/quart is 0.067 ton/Litre.
From the above illustration, 645 Newton/quart is equivalent to 0.067 ton/Litre.