A positive charge and a negative charge held near each other are released. As they move, the force on each particle a. increases. b, decreases. c. stays the same. 

The resulting charge on the objects are +3.2 X 10⁻¹³ C on object A and -3.2 X 10⁻¹³ on object B.

An atom has the same number of protons (which have a positive charge) and electrons (which have a negative charge). As a result, there is no net charge on the atom because the opposite charges are balanced. Additionally, the atom's neutrons lack a charge. As a result, an atom has no electrical charge.

Because the number of protons and electrons in an atom is the same, it is electrically neutral. As a result, the negative and positive charges cancel each other out. A type of subatomic particle known as a neutron has no charge—they are neutral. The powerful nuclear force binds neutrons, like protons, to the atom's nucleus.

Learn more about electrically neutral:

brainly.com/question/14441938

#SPJ4

Although a superimposable binuclear cluster domain can be seen in the crystal structure of a Gal4(1-65)/DNA complex, the rest of the protein sequence is ordered, with residues 41–50 and 50–65 creating an ordered extended loop region and a coiled–coil dimerization motif, respectively.

What is the GAL4 binding sequence?

The sequence 5′-CGG-N11-CCG-3′ makes up the 17mer of the consensus Gal4-binding site. Gal4 interacts as a dimer, as shown by the crystal structure of the minimum DNA-binding domain (amino acids 1-65) in association with a consensus UAS,

Learn more about dimerization :

brainly.com/question/14595419

#SPJ4

in the 1860s, maxwell derived a set of mathematical equations that described electromagnetic waves that could have different wavelengths. these waves, which include visible light, have since been shown to have no wavelength limit, either short or long.

What is visible light?

Visible light waves are the only wavelengths of the electromagnetic spectrum that humans can see. The different wavelengths of visible light are seen as the colors of the rainbow: red, orange, yellow, green, blue, indigo, and violet.

What is the range of visible light?

The visible wavelengths cover a range from approximately 0.4 to 0.7 µm. The longest visible wavelength is red and the shortest is violet. Common wavelengths of what we perceive as particular colors from the visible portion of the spectrum are listed below.

What are the frequency and wavelength ranges of visible light?

Visible light has around 400 nm to 700 nm and a frequency range of around 400 THz to 800 THz. This part of the electromagnetic spectrum can be “seen” and distinguished optically by the human eye.

To know more about visible light:

https://brainly.com/question/12732705

#SPJ4

O(n0) = O is the temporal complexity when k = 0. (1). This indicates that the recurrence relation's runtime is constant and independent of the input's size.

A recurrence tree approach may be used to determine the runtime of the following recurrence relation.

Assume that t(n) = c*nk, where k is the temporal complexity and c is a constant. O(n) = c * (n/5) = t(n) = t(n/5) + t(7n/10) + ^k + c * (7n/10) ^k + O(n) = c * n ^k * (1/5) ^k + c * n ^k * (7/10) ^k + O(n) (n)

So, (1/5)

^k + (7/10)

^k = 1

Using a logarithmic transformation and the definition of logarithms, the following results are obtained:

0 is equal to k * log(1/5) + k * log(7/10).

We may calculate the following by applying the logarithmic condition log(ab) = log(a) + log(b): k * log(1/5 * 7/10) = 0.

We obtain k = 0 by dividing both sides of the equation by log(7/50).

The temporal complexity is O(n0) = O since k = 0. (1).

This indicates that the recurrence relation's runtime is constant and independent of the input's size.

learn more about recurrence relation here:

https://brainly.com/question/9521757

#SPJ4

Force the atmosphere exert on the flat end of each cylinder is 2.9 x 10⁴ N

F = PA

Number of which need to pull the two cylinders

n=F : (m.g)

Force exerted on the flat end, F= PA

=P(πr²)

= (1.013 x 10⁵ Pa) x π(30 x 10⁻²m)²

=28.62 x 10³N

= 2.9 x 10⁴ N

Force is the push and pull that occurs on an object. In physics, force is any interaction that can cause an object with mass to experience a change in motion, either in terms of direction or geometric construction.

In simple terms, the notion of force is a push or pull on an object with mass that causes the object to change its speed. Whenever there is an interaction between two objects, there is a force on each of them. When the interaction stops, the two objects are no longer experiencing a force.

Force is symbolized by the letter F (Force). In International Units , the unit used to measure force is the Newton, which is denoted by N. The instrument for measuring force is a dynamometer, or spring balance.

Learn more about force at https://brainly.com/question/13191643

#SPJ4

Stereo vision works because our eyes see slightly different images with distant objects shifting more between the two images.

Stereo vision works because our eyes see slightly different images with distant objects shifting more between the two images.

This is due to the fact that our eyes are positioned a few centimeters apart from each other, which gives us slightly different perspectives on the world around us. The difference in perspective between the two images allows the brain to calculate the distance to objects in the scene, creating the perception of depth and three-dimensionality. This process is known as stereopsis and is based on the idea that the closer an object is, the greater the shift between the two images of that object will be. By analyzing these shifts, the brain is able to calculate the relative distances to objects in the scene and construct a three-dimensional representation of the world.

To learn more about perception of depth:

https://brainly.com/question/2372629

#SPJ4

This statements stands for true, i.e. Compared to dry heat methods, wet heat techniques function at higher temperatures and with longer exposure times.

Moist heat methods, such as boiling, steaming, and autoclaving, operate at higher temperatures and longer exposure times than dry heat methods, such as roasting, baking, and grilling. Moist heat is more effective at killing microorganisms and inactivating enzymes than dry heat because it conducts heat more efficiently than air and penetrates food more effectively. For example, steam sterilization typically occurs at 121-134°C for 15-60 minutes, while dry heat sterilization occurs at 160-180°C for 2-4 hours. The longer exposure times for moist heat methods are necessary to ensure that all parts of the food reach the required temperature to destroy microorganisms and enzymes.

To know more about dry heat please refer: https://brainly.com/question/13623760

#SPJ4

Therefore, only if the subject responds has the reinforcer been presented.

Operant conditioning gives the word "reinforcer" a specific definition. When it is presented after a response and is dependent upon it, a stimulus known as a reinforcer increases the likelihood that the response will be made in a specific circumstance.

A behavior will be encouraged and strengthened by reinforcement that immediately follows it. Compared to reinforcement, punishment is the opposite. An action is discouraged and made weaker when punishment follows it.

Real-world reinforcement for behavior does not occur all the time. The frequency of reinforcement, according to Skinner, can affect how quickly and effectively someone learns a new behavior.

In a variety of real-world situations, such as the classroom and therapeutic settings, operant conditioning is still frequently used.

To know more about reinforcer visit:

brainly.com/question/14593691

#SPJ4

The sound intensity that is equivalent to 43.0 dB is equal to [tex]I = 1.0 * 10^{-4} W/m^2[/tex]

Sound intensity is the energy of a sound wave per unit area, measured in watts per square meter (W/m2). It is related to the strength or amplitude of the wave and is a measure of the sound pressure level. Sound intensity can be used to measure the loudness of a sound, as well as its direction and distance from the source.This is because the decibel scale is a logarithmic scale, so a difference of 10 dB represents a 10-fold increase in sound intensity. Therefore, a sound intensity of  43.0 dB is 10^4 (or 10,000) times larger than a sound intensity of 0 dB, which is equal to [tex]I = 1.0 * 10^{-4} W/m^2[/tex]

The equation used to calculate this is:

[tex]I = 10^{\frac{dB}{10}} * 10^{-12} W/m^2[/tex]

or

[tex]I = 10^{\frac{43.0}{10}} * 10^{-12} W/m^2[/tex]

or

[tex]I = 1.0 * 10^{-4} W/m^2[/tex]

therefore ,The sound intensity that is equivalent to 43.0 dB is equal to [tex]I = 1.0 * 10^{-4} W/m^2[/tex]

learn more about Sound intensity Refer:brainly.com/question/19863423

#SPJ4

When the capacitor is charged, 15 μC charge is on each plate.

The charge on each plate of a capacitor can be calculated as Q = C * V, where Q is the charge, C is the capacitance, and V is the voltage across the capacitor. In this case, C = 10 μF and V = 3.0 V,

so:

Q = 10 μF * 3.0

V = 30 μC

Therefore, each plate of the capacitor will have a charge of 30 μC / 2 = 15 μC.

A capacitor is an electrical thing that stores electric power in an electric powered area. It consists of two metal plates separated by a non-conductive material called a dielectric. When a voltage source is connected across the plates, an electric charge accumulates on each plate, creating an electric field between them. The amount of charge that can be stored on the plates, and the electric field strength, is proportional to the capacitance of the capacitor.

Capacitors are widely used in electrical circuits for various purposes such as filtering, coupling, and storing energy. They can be found in many different types of electronic devices, such as radios, televisions, computers, and power supplies.

Capacitors can also be used in power factor correction to regulate the flow of AC power in an electrical system. They can also be used in DC-DC converters to regulate the output voltage of a power supply.

To learn more about Capacitor  visit here:

brainly.com/question/24212501

#SPJ4

The diameter of the discs is 2 × 0.003 m = 0.006 m.

The electric field between two parallel charged discs can be calculated as E = V/d, where V is the potential difference between the discs and d is the separation distance between them. The charge Q on one of the discs can be calculated as Q = ne, where n is the number of electrons transferred from one disk to the other and e is the charge of an electron.

Using the equations for electric field and charge, we can find the separation distance d between the discs as follows:

[tex]E = \frac{V}{d} = \frac{Q}{A\epsilon_0}[/tex]

d = Q/(AEε 0 ) = ne/(Aε 0 E)

[tex]d= 9.4 * 10^{9} * 1.60 * 10^{-19} / (\pi (d/2)^{2} * 8.85 * 10^{-12} * 1.0 * 10^{5})[/tex]

Rearranging and solving for d, we find:

[tex]d = \sqrt{9.4 * 10^9 * 1.60 * 10^-19 / (\pi * 8.85 * 10^{-12} * 1.0 * 10^5)} \\\\ = \sqrt{1.0 * 10^{-7}}m = 0.003 m[/tex]

To know more about electric field strength

brainly.com/question/15288658

#SPJ4

Approx. 243 km/hr is the significant figure when 0.550 In/Ms is converted to Km/Hr.

Significant figures are the meaningful digits in a number that express the precision of a measurement. They include all digits that are known with certainty, as well as the first digit that is uncertain. For example, in the number 0.0056, there are three significant figures: 5, 6, and the zero immediately to the left of the decimal point. Rules for determining the number of significant figures in a measurement include counting all non-zero digits, counting zeros that are between non-zero digits, and counting trailing zeros after the decimal point only if the number has a decimal point.

To know more about precision, visit:

https://brainly.com/question/15926220

#SPJ4

Yes, it would affect the mediums sensitivity or specificity and may lead to the incorrect or undesired results, due to the error in starting MSA pH.

A change in the starting pH of MSA (methylene blue active) medium from the recommended range of 7.2-7.6 to 7.8 could affect the medium's sensitivity and specificity. Methylene blue is a pH indicator in MSA medium, which is used to identify the presence of gram-negative bacteria. The color of methylene blue changes from blue to colorless in the presence of acid produced by gram-negative bacteria. The change in pH to 7.8 would result in a less acidic environment, which could affect the ability of the medium to detect the presence of acid-producing gram-negative bacteria, leading to reduced sensitivity. Furthermore, a change in the starting pH to 7.8 could also result in false positive results, as the color change of methylene blue can also be influenced by factors other than acid production. This could lead to a decrease in specificity, as the test could be giving false positive results for the presence of gram-negative bacteria.

In conclusion, a deviation from the recommended starting pH of MSA medium can affect the medium's sensitivity and specificity and may lead to incorrect results.

To know more about specificity please refer: https://brainly.com/question/15362331

#SPJ4

The required additional volume of water displaced is calculated to be 0.14 m³.

The weightiness of the added water displaced is equivalent to the joined weight of the two extra people who come to be into the boat,

m water g = 2 × 690 N = 1,380 N

The mass of the water which is displaced is

m water g = 1,380 N = 1,380 N / 9.8 m/s² = 141 kg

Computing the calculation for density for the volume of water displaced and practice this outcome for the mass of the water displace to get the answer:

ρ water = mass of water / volume of water

volume of water = mass of water / ρ water = 141 kg / 1000 kg /m³ (to eliminate kilogram)

⇒ 0.14 m³ the additional volume of water that is displaced

To know more about volume:  

https://brainly.com/question/4522936

#SPJ4

Ptolemy's and Aristotle's solar systems were geocentric, and Copernicus' and Galileos' were heliocentric.

What is the geocentric system?

Geocentric system (or model) means that Earth is the centre of the system and the Sun together with other planets circle around it. This point of view was common during Ancient times (Greek and Roman). The main protagonists were Aristotle and Ptolemy. Later in the Middle Ages, the Christian church adopted this system as the only one possible.

What is the heliocentric system?

The heliocentric system explains that Sun is the centre of the system and Earth and other plates rotate around it. Modern science today accepts this as the only model giving a list of proofs for it. Copernicus and Galileo were the main protagonists of the Solar system (between the XVI and XVII century).

Who proposed the heliocentric and geocentric model?

The most highly developed geocentric model was that of Ptolemy of Alexandria (2nd century). It was generally accepted until the 16th century, after which it was superseded by heliocentric models such as that of Nicolaus Copernicus.

To know more about geocentric and heliocentric systems:

https://brainly.com/question/15319844

#SPJ4

Complete question:

What were the solar system models of Ptolemy and Aristotle, and Copernicus' and Galileos'?

Answer:

The acceleration due to gravity felt by an object in orbit around the Earth can be calculated using the formula:

a = G * M / r^2

where G is the gravitational constant (6.67 × 10^-11 m^3 kg^-1 s^-2), M is the mass of the Earth (6.0 x 10^24 kg), and r is the distance between the object and the center of the Earth.

For an object in an orbit of about 110 km, we have:

r = 6,400 km + 110 km = 6,510 km = 6.51 x 10^6 m

Substituting into the formula:

a = 6.67 × 10^-11 * 6.0 x 10^24 / (6.51 x 10^6)^2

a = 9.80 m/s^2

So the rocket in an orbit of about 110 km would experience an acceleration due to gravity of approximately 9.8 m/s^2.

The highest heat transfer occurs when one gram of steam is converted to one gram of water at 100 degrees Celsius.

Heat is the result of the movement of kinetic energy within a material or an item, or from another fuel source to a material or an object. Irradiation, conduction, and convection are the three mechanisms through which such energy can be transferred. Energy sources for heating include electricity, combined heat and power, ground source combined heat and power, propane (LP), fossil fuels, oil, coals, and wood.

The energy that results from the motion of molecules and atoms in a medium is known as thermal energy, often known as heat. These electrons get hotter as they move more quickly. The heat energy of the ground is known as geothermal resources. Energy that is stored in rotational motion motion energy.

To know more about heat visit:

https://brainly.com/question/29139902

#SPJ4

The force exerted by man on cable is 1863.9 N and the reaction at support is 735.75 N.

In this instance (See Picture), the man is pulling on the cable while standing at the end of the beam. The man's push on the cable and the support's response result in two forces operating on the system. In order to preserve balance, these two forces must be equal in strength and directed in the opposite direction.

Consider the weight of the beam to be concentrated at its centre of gravity G (Point B)

Weight of beam = Wb = 40 x 9.81 = 392.4 N.

Consider the weight of man to be point load acting at the end of the beam

weight of man = Wm = 75 x 9.81 = 735.75 N

The pull applied by man is transferred by the cable over the pulley and is applied at point B

Let, the pull applied by man = P

Now, Consider the summation of moments of forces about the support C.

∑M_C = 0 (equilibrium stage)

∵ {(Wm × 3) + (Wb × 1.5)} - (P × 1.5) = 0

⇒ {(735.75 × 3) + (392.4 × 1.5)} - (P × 1.5) = 0

⇒ P = 1863.9 N

Hence, force exerted by man on cable is 1863.9 N

Now, consider the summation of vertical forces on the beam

Let, R be the reaction at the point c

∑F_Y = 0

- Wm - Wb + P + R = 0 (Positive forces come from moving upward, whereas negative forces come from moving below.)

⇒ - 735.75 - 392.4 + 1863.9 + R = 0

⇒ R = 735.75 N

hence, reaction at point C is equal to 735.75 N.

To know more about equilibrium

brainly.com/question/13461681

#SPJ4

CP is the centi-poise, a unit of viscosity, it is equal to one-hundredth of a poise.

The viscosity is defined as the resistance of the fluid offered to the change in shape or orientation of the layers. When one layer moves over other layer of the liquid, then both layer resist motion of each other. This friction force of liquid is known as viscosity. its SI unit is N-s/m², and poise is the unit of viscosity in CGS system. 1 poise = 1 dyne-s/cm². 1 centi-poise = 0.01 P.

1 centi-poise is equal to 1 milipascal-sec(m-Pa.s) in the SI unit.

To know more about viscosity, here

https://brainly.com/question/13385698

#SPJ4

The percent error in this situation is 2%. This is calculated by taking the difference between the target length of 30 centimeters and the actual length of 29.4 centimeters, and then dividing it by the target length (30 centimeters).

The result is 0.06, which can be expressed as a percentage by multiplying it by 100, giving a result of 2%.

The percent error is an important measure of accuracy, and it can be used to assess the reliability of a measurement. In this case, a 2% error indicates that the measurement is relatively accurate, although it is still slightly off from the expected result.

In general, the smaller the percent error, the more accurate the measurement is. However, a higher percent error does not necessarily indicate that the measurement is completely unreliable, and it can still be used for certain purposes.

Learn more about The percent error:

https://brainly.com/question/28771966

#SPJ4

If an atom has 7 protons and 8 electrons, then it has an electric charge of -1.

An electric charge is equal to the difference between the number of protons and electrons in an atom. If an atom has 7 protons and 8 electrons, then it has a net electric charge of:

Charge = # of protons - # of electrons = 7 - 8 = -1

So, the atom has an electric charge of -1, indicating that it is a negatively charged ion or an anion.

An atom is neutral when it has an equal number of positively charged protons and negatively charged electrons. The number of protons in an atom determines its atomic number and its identity as an element. The number of electrons in an atom determines its electric charge.

If an atom has more electrons than protons, it will have a net negative charge, meaning that it is an anion. If an atom has fewer electrons than protons, it will have a net positive charge, meaning that it is a cation.

To know more about anion please refer:

https://brainly.com/question/20781422

#SPJ4

The required value of velocity 50 mi/h when converted to m/s is calculated to be 22.3 m/s.

mi/h is known as miles/hour. It is the unit of speed expressing number of miles travelled in one hour.

It is known that, 1 mi = 1609 m

And 1 hour = 60 min = 60 × 60 sec = 3600 sec

Now, let us convert 50 mi/h to m/s.

1 mi/h = 1609 m/3600 s = 0.446 m/s

Here, we are asked to convert 50 mi/h to m/s.

So, 50 mi/h = 50 × 0.446 m/s = 22.3 m/s

Thus, the required value of 50 mi/h when converted to m/s is 22.3 m/s.

To know more about conversions:

https://brainly.com/question/14664935

#SPJ4

The answer is 3600 or c.

First, do 800 x 4 = 3200 since 60 minutes = 1 hour.

Next, do 800 ÷ 2 = 400 since 30 minutes is half of 800.

Finally, do 3200 + 400 = 3600.

Answer is 3600.

Mark me Brainliest. :D

The correct order is ethanol, methanol, propanol, butanol.

This is because the boiling points of these alcohols increase in the order listed, with ethanol having the lowest boiling point and butanol having the highest.

During distillation, the mixture of alcohols is heated until the first component, in this case ethanol, reaches its boiling point and evaporates.

The vapor is then condensed back into a liquid and collected, and the process continues until all of the components have been separated based on their boiling points.

Read more about boiling points here:

https://brainly.com/question/40140

#SPJ1

Cognitive interview or the way of interviewing eye witnesses is the possible solution for the problems of bias which are associated with blind administration.

Blind administration includes the use of an officer, who is other than the officer, the individual who is constructing the photographic lineup and also the one who does not know the identity of the true suspect, to present the lineup to the eyewitness for the incidence.

Implementing the blind administration, where the officer who is constructing photographic lineup is unaware of who the actual suspect is, can prevent these unconscious actions and also can significantly reduce the likelihood of misidentification.

Learn more about Blind administration here:

https://brainly.com/question/28088973

#SPJ1

Object b is subject to a total gravitational force of zeroThe gravitational attraction between each pair of items in a system of three objects is equal in strength but goes in the opposite direction. This indicates that

A key idea in physics, especially in the study of gravity, is the idea of equal and opposing forces. When two things come into contact with one another, they apply equal and opposing forces. This indicates that the forces experienced by the two objects are equal in strength but directed in opposing directions. When three items are evenly spaced apart, their gravitational pull on the centre object (object b) is equal in strength but opposite in direction, creating a net force of zero. In addition to gravitational forces, this concept also holds true for frictional and electromagnetic forces. It's crucial to comprehend equal and opposing forces while attempting to describe

Learn more about equal here:

https://brainly.com/question/12323068

#SPJ4

The information provided makes it impossible to estimate the mass of the second rail car.

The overall momentum of a closed system must stay constant according to the rule of conservation of momentum, hence the momentum before and after a collision must be equal.

The formula for momentum is p = mv, where m stands for mass and v for speed. As a result, the first train car's beginning momentum and the combined final momentum of the two cars may be expressed by the following equation:

m1 * v1 = (m1 + m2) * v2

where m1 is the mass of the first train car (42,000 kg),

v1 is its initial velocity (10 m/s),

m2 is the mass of the second train car,

And v2 is the velocity of the two cars after the collision (6 m/s).

So, m2 can be determined if m1 and v1 are known, but it cannot be determined from the information given.

For such more question on mass.

https://brainly.com/question/19385703

#SPJ4

Kitchen lighting is permitted to be supplied by the two 20-ampere small-appliance circuits required for the kitchen and dining room area according to the National Electric Code (NEC) 210.11.

These circuits are designed to provide power for small appliance, such as toasters, blenders, and coffee makers, and can also be used to supply power to the kitchen lighting. However, it's important to note that the total load on these circuits should not exceed the maximum amperage rating of 20 amps. This means that the combined load of all the appliances and lighting fixtures connected to these circuits should not exceed 20 amps. In addition to using the small-appliance circuits, it's also common to use separate dedicated circuits for specific electrical loads, such as for the refrigerator or for a kitchen island lighting. It's important to consult a licensed electrician for proper installation and to ensure that the electrical system is safe and meets all relevant codes and regulations.

To know more about appliance please refer: https://brainly.com/question/15579382

#SPJ4

Solution: The value of 1.6x10-19 coulombs is the elementary charge that is the charge of an electron or a proton is the smallest amount of free charge that has been discovered.

Elementary charge is the smallest amount of free charge that can be measured or quantized. It is a fundamental physical constant. Elementary charge is equal to the positive electric charge present on a proton and negative electric charge present on an electron. Electric charge was first measured by Robert A. Millikan and Harvey Fetcher’s famous Oil drop experiment in 1909. In general the value of 1.6x10-19 c is considered as unit charge which can be positive or negative. Charge of electron is presented as -1 and charge of proton is presented as +1. Depending upon the type of charge presented on chemical species they are designated as positive, negative and neutral.

Learn more about elementary charge here:

https://brainly.com/question/3985120

#SPJ4