Answer:
a place where two bones come together is known as a join
Answer:
Hey mate.....
Explanation:
This is ur answer....
JointsJoints – A place in the body where bones come together. Non-Moveable Joints (sometimes called fixed or fibrous) – A place in the body where two or more bones come together but do not move.
Hope it helps!
mark me brainliest plz....
Follow me! :)
What type of weather would a continental Polar air mass bring
Answer:
Continental polar ( cp):
Explanation:
Cold and dry, originating from high latitudes, typically as air flowing out of the polar highs. This air mass often brings the rattleing cold, dry and clear weather on a perfect winter day and also dry and warm weather on a pleasant day in summer.
On the Moon's surface, lunar astronauts placed a corner reflector, off which a laser beam is periodically reflected. The distance to the Moon is calculated from the round-trip time. The Earth's atmosphere slows down light. Assume the distance to the Moon is precisely 3.84×108 m, and Earth's atmosphere (which varies in density with altitude) is equivalent to a layer 30.0 km thick with a constant index of refraction n=1.000293. What is the difference in travel time for light that travels only through space to the moon and back and light that travels through the atmosphere and space?
Answer:
a) space only t = 1.28 s
b) space+ atmosphere t_ {total} = 1.28000003 s
Explanation:
The speed of light in each material medium is constant, which is why we can use the uniform motion relations
v= x / t
a) let's look for time when it only travels through space
t = x / c
t = 3.84 10⁸/3 10⁸
t = 1.28 s
b) we look for time when it travels part in space and part in the atmosphere
space
as it indicates that the atmosphere has a thickness of e = 30 10³ m
t₁ = (D-e) / c
t₁ = (3.84 10⁸ - 30.0 10³) / 3 10⁸
t₁ = 1.2799 s
atmosphere
we use the refractive index
n = c / v
v = c / n
we substitute in the equation of time
t₂ = e n / c
t₂ = 30 10³ 1,000293 /3 10⁸
t₂ = 1.000293 10⁻⁴ s
therefore the total travel time is
t_ {total} = t₁ + t₂
t_ {total} = 1.2799+ 1.000293 10⁻⁴
t_ {total} = 1.28000003 s
we can see that the time increase due to the atmosphere is very small
A cryogenic vacuum pump works by condensing vapors onto some absorbent medium. This is an efficient and clean way to pump a system in a research environment. The term cryo means cold, which indicates that these types of vacuum pumps contain a refrigerant cycle to cool the internal parts. The temperature difference between the inside and outside of a typical cryogenic pump is Δ=303 ∘C . Derive an expression to convert this difference into Fahrenheit and express the answer.
Answer: Temperature in Fahrenheit is 577.4
Explanation:
The conversion factor for converting celcius to Fahrenheit is:
[tex]F=\frac{9}{5}\times C+32[/tex]
where F = temperature in Fahrenheit
C = Temperature in Celcius
Given : Temperature difference in Celcius = [tex]303^0C[/tex]
Putting in the values we get:
[tex]F=\frac{9}{5}\times 303+32[/tex]
[tex]F=577.4[/tex]
Thus the answer in Fahrenheit is 577.4
The required conversion of temperature from Celsius to Fahrenheit is 577.4 Degree Fahrenheit.
Given data:
The temperature difference between the inside and outside of a typical cryogenic pump is, [tex]\Delta T=303^{\circ}\rm C[/tex].
The degree measure of the flow of heat from one point to another is known as the temperature at a specific point. The temperature measurements are done in Celsius, Fahrenheit and Kelvin scales. The expression to convert the Celsius scale to Fahrenheit scale is,
[tex]T=(C \times \dfrac{9}{5} + 32)\;\rm ^{\circ}F[/tex]
Solving as,
[tex]T=(303 \times \dfrac{9}{5}+32 )\;\rm ^{\circ}F\\\\T=(303 \times \dfrac{9}{5}+32 )\;\rm ^{\circ}F\\\\T=577.4\;\rm ^{\circ}F[/tex]
Thus, we can conclude that the required conversion of temperature from Celsius to Fahrenheit is 577.4 Degree Fahrenheit.
Learn more about the Temperature conversion here:
https://brainly.com/question/19705641
What is the only difference between the reactant and product side of a chemical reaction?
Answer:
Products is the result. Reactants produce the result
Explanation:
,,
Steel beams are used for load bearing supports in a building. Each beam is 4.0 m long with a cross-sectional area of 7.5 10-3 m2 and supports a load of 4.5 104 N. Young's modulus for steel is 210 ✕ 109 N/m2.
Which of the following best describes gravitational potential energy,
O The energy stored in an object when you lift it,
O The energy stored in an object due to its chemical structure,
The energy of an object in motion.
The energy stored in an object due to its electric charges.
Select the correct answer.
Which graph shows the correct relationship between kinetic energy and speed?
Answer:
c
Explanation:
It's c the last one u see
Describe how spatial awareness during physical activity impacts student performance
I uploaded the answer to a file hosting. Here's link:
tinyurl.com/wpazsebu
Spatial awareness may impact student performance (even physical performance) because spatial understanding is fundamental for visual processing.
Spatial awareness refers to the understanding of a person (in this case a student) and of the relationships between different objects within a specific space.It has been shown that spatial awareness can affect performance in mathematics, punctuation spelling, etc. An example of spatial awareness includes the visualization of different objects from different perspectives.In conclusion, spatial awareness may impact student performance (even physical performance) because spatial understanding is fundamental for visual processing.
Learn more in:
https://brainly.com/question/15279294
starting from rest, your bicycle can reach a speed of 4.0 m/s in 50 s. Assuming that your bicycle accelerates at a constant rate, what is its acceleration?
Answer:
0.08 ms^-2
Explanation:
by using v= u + at
initial velocity is zero as it is starting from rest
4= 0 + a x 50
4/50 = a = 0.08 ms^-2
A motorcycle traveling due east at a constant speed covers 75 kilometers in
1.5 hours. What is its velocity in km/h?
Answer:
The velocity of the motorcycle is 50km/hr due east.
Adding resistors in series changes the total resistance of a circuit by
(5 points)
O increasing the resistance
O decreasing the resistance
o it does not affect the resistance
o decreasing the resistance if the value of the resistor added is less than the
greatest resistor in the circuit
Answer:
Increasing the resistance
Explanation:
Answer: A
Explanation:
increasing the resistance
A physicist drives through a stop light. When he is pulled over, he tells the police officer that the Doppler shift made the red light of wavelength 635 nm appear green to him, with a wavelength of 550 nm. The police officer writes out a traffic citation for speeding. How fast was the physicist traveling, according to his own testimony
Answer:
Explanation:
[tex]\lambda[/tex] = Observed wavelength = 550 nm
[tex]\lambda'[/tex] = Actual wavelength = 635 nm
c = Speed of light = [tex]3\times 10^8\ \text{m/s}[/tex]
v = Velocity of the physicist
Doppler shift is given by
[tex]f=\sqrt{\dfrac{c+v}{c-v}}f'\\\Rightarrow \dfrac{c}{\lambda}=\sqrt{\dfrac{c+v}{c-v}}\dfrac{c}{\lambda'}\\\Rightarrow \dfrac{\lambda'^2}{\lambda^2}=\dfrac{c+v}{c-v}\\\Rightarrow \dfrac{\lambda'^2}{\lambda^2}=\dfrac{1+\dfrac{v}{c}}{1-\dfrac{v}{c}}\\\Rightarrow \dfrac{\lambda'^2}{\lambda^2}(1-\dfrac{v}{c})=1+\dfrac{v}{c}\\\Rightarrow \dfrac{\lambda'^2}{\lambda^2}(1-\dfrac{v}{c})=1+\dfrac{v}{c}\\\Rightarrow \dfrac{\lambda'^2}{\lambda^2}-1=\dfrac{v}{c}(1+\dfrac{\lambda'^2}{\lambda^2})\\\Rightarrow v=\dfrac{c(\dfrac{\lambda'^2}{\lambda^2}-1)}{1+\dfrac{\lambda'^2}{\lambda^2}}[/tex]
[tex]\Rightarrow v=\dfrac{3\times 10^8\times (\dfrac{635^2}{550^2}-1)}{1+\dfrac{635^2}{550^2}}\\\Rightarrow v=42817669.77\ \text{m/s}[/tex]
The physicist was traveling at a velocity of [tex]42817669.77\ \text{m/s}[/tex].
which causes magnets to stick to metal
Answer:
Steel
Explanation:
Steel is a metal that magnets stick to because iron can be found inside steel
Answer:Magnets stick to any metal that contains iron, cobalt or nickel.
Explanation:Iron is found in steel, so steel attracts a magnet and sticks to it. Stainless steel, however, does not attract a magnet.
A 416 kg merry-go-round in the shape of a horizontal disk with a radius of 1.7 m is set in motion by wrapping a rope about the rim of the disk and pulling on the rope. How large a torque would have to be exerted to bring the merry-go-round from rest to an angular speed of 3.7 rad/s in 2.9 s
Answer:
The torque exerted on the merry-go-round is 766.95 Nm
Explanation:
Given;
mass of the merry-go-round, m = 416 kg
radius of the disk, r = 1.7 m
angular speed of the merry-go-round, ω = 3.7 rad/s
time of motion, t = 2.9 s
The torque exerted on the merry-go-round is calculated as;
[tex]\tau = Fr= I\alpha\\\\\tau = (\frac{1}{2} m r^2)(\frac{\omega }{t} )\\\\\tau = (\frac{1}{2} \times 416 \times 1.7^2)( \frac{3.7}{2.9} )\\\\\tau = 766.95 \ Nm[/tex]
Therefore, the torque exerted on the merry-go-round is 766.95 Nm
A reaction occurs when a compound breaks down. This reaction has one reactant and two or more products. Energy, as from a battery, is usually needed to break the compound apart.
Answer:
decomposition
Explanation:
Investigator Daniels is working on the scene of a suspected arson on a rainy evening. The site of the fire was a mechanic's garage, so there are plenty of accelerants
on the scene. According to the owner of the garage, there had been an argument with a customer the day before about his motorcycle. All the employees left by
6:00 pm. The office was unharmed but there is much damage in the mechanic's bay area and toolboxes. The flames look to have been most concentrated around a
bucket that the owner says was filled with oily rags. She is trying to sift through the evidence and find the relevant facts of the case so far. In order to effectively
Identify the relevant facts, Investigator Daniels creates a word bank. Which word would not fit into her word bank?
Argument
Rainy
Olly rags
Toolboxes
Answer:
Rainy
Explanation:
It is the only one that has nothing to do with the case
Find the momentum of a 15 kg object traveling at 7 m/s
What is the momentum
What is the velocity
What is the mass
What equation did you use to solve?
Find the momentum of a 15 kg object traveling at 7 m/s.
The momentum of an object is found by using the following formula:
[tex]\displaystyle p=mv[/tex]
P is the momentum and is measured in kg · m/sm is the mass and is measured in kgv is the velocity and is measured in m/sIn this question, the object is 15 kg and is travelling at 7 m/s. That means the mass is 15 kg and the velocity is 7 m/s.
Since all the needed variables are found, substitute it into the equation:
[tex]\displaystyle p=mv \rightarrow p=15 \times 7[/tex]
Multiply:
[tex]\displaystyle p=105\ kg \times m/s[/tex]
__________________________________________________________
What is the momentum? 105 kg · m/s
What is the velocity? 7 m/s
What is the mass? 15 kg
What equation did you use to solve? p = mv
__________________________________________________________
How much work is done when 100 N of force is applied to a rock to move it 20 m
Answer: 2000 J
Explanation: work W = F s
ASAP Even though the force exerted on each object in a collision is the same strength, if the objects have different masses, their will be different. * O changes in velocity O amount of force O speed and direction
Answer:
it should be changes in velocity
Explanation:
I hope this helps!
Car B is rounding the curve with a constant speed of 54 km/h, and car A is approaching car B in the intersection with a constant speed of 72 km/h. The x-y axes are attached to car B. The distance separating the two cars at the instant depicted is 40 m. Determine:
This question is incomplete, the complete question is;
Car B is rounding the curve with a constant speed of 54 km/h, and car A is approaching car B in the intersection with a constant speed of 72 km/h. The x-y axes are attached to car B. The distance separating the two cars at the instant depicted is 40 m. Determine: the angular velocity of Bxy rotating frame (ω).
Answer:
the angular velocity of Bxy rotating frame (ω) is 0.15 rad/s
Explanation:
Given the data in the question and image below and as illustrated in the second image;
distance S = 40 m
V[tex]_B[/tex] = 54 km/hr
V[tex]_A[/tex] = 72 km/hr
α = 100 m
now, angular velocity of Bxy will be;
ω[tex]_B[/tex] = V[tex]_B[/tex] / α
so, we substitute
ω[tex]_B[/tex] = ( 54 × 1000/3600) / 100
ω[tex]_B[/tex] = 15 / 100
ω[tex]_B[/tex] = 0.15 rad/s
Therefore, the angular velocity of Bxy rotating frame (ω) is 0.15 rad/s
What are some possible factors that can be the X
and Y axis of a motion graph?
Answer:
x-Speed/velocity
y-time.
Explanation:
because Speed is a rate of change of distance while time how long it takes a a car to move to a specific point
Calculate the kinetic energy of an 80,000 kg airplane that is flying with a velocity of 167 m/s.
Answer:
1115560000 J
Explanation:
1/2 * 80,000 * 167^2 m/s = 1115560000 J
find acceleration for force 2N acting on 2 Kg?
Answer:
1 m/s^2
Explanation:
F=ma
2 Newtons=2 Kg * a
a=1 m/s^2
how can we minimise the use of plastic
Answer:
recyclable toothbrushes, cardboard or metal straws, cardboard gallons instead of plastic, use glass and reusable cups
Explanation:
Why was Mars orbiter sent to mars?
Explanation:
to develop the technologies required for designing, planning, management and operations of an interplanetary mission. The secondary objective is to explore Mars' surface features, morphology, mineralogy and Martian atmosphere using indigenous scientific instruments
Answer: Mars Climate Orbiter was lost on arrival September 23, 1999. Engineers concluded that the spacecraft entered the planet's atmosphere too low and probably burned up.
Explanation: The scientific reasons for going to Mars can be summarised by the search for life, understanding the surface and the planet's evolution, and preparing for future human exploration. Understanding whether life existed elsewhere in the Universe beyond Earth is a fundamental question of humankind.
A fisherman notices that his boat is moving up and down periodically without any horizontal motion, owing to waves on the surface of the water. It takes a time of 2.60 s for the boat to travel from its highest point to its lowest, a total distance of 0.700 m . The fisherman sees that the wave crests are spaced a horizontal distance of 6.00 m apart.
Required:
a. How fast are the waves traveling?
b. What is the amplitude of each wave?
c. If the total vertical distance traveled by the boat were 0.500 , but the other data remained the same, how fast are the waves traveling?
d. If the total vertical distance traveled by the boat were 0.500 , but the other data remained the same, what is the amplitude of each wave?
Answer:
a) 1.2 m/s
b) 0.350 m
c) 1.2 m/s
d) 0.250 m
Explanation:
a)
At any traveling wave, there exists a fixed relationship between the frequency, the speed and the wavelength, as follows:[tex]v = \lambda * f (1)[/tex]
We know that the frequency is equal to the number of cycles that the wave does in a second, so it's the inverse of the time needed to complete one cycle, that we call the period.In our case, since the wave completes one half cycle (from the highest point to the lowest one) in 2.60 s, this means that the time needed to complete a cycle, is just the double of it, i.e., 5.20 s .The frequency of the wave is just the inverse of this value:⇒ f = 1/T = 1/5.20 s = 0.2 1/s = 0.2 Hz (2)If the wave crests are spaced a horizontal distance of 6.0 m apart, this means that the wavelength λ is just 6.0 m.Replacing in (1) by (2) and the given λ, we can find the speed v, as follows:[tex]v = \lambda * f = 6.0 m * 0.2 1/s = 1.2 m/s (3)[/tex]
b)
By definition, the amplitude of the wave, is the absolute value of its highest value over its the zero reference level (in this case the surface of the water), so it is the half of the total vertical distance traveled by the boat:⇒ A = Δd/2 = 0.700m/2 = 0.350 m (4)
c)
Since the amplitude of the wave is independent of the frequency and the wavelength (that define the speed of the wave) the wave speed remains the same, i.e., 1.2 m/s.d)
If the total distance traveled by the boat were 0.500 m , the amplitude would be just half this value, as follows:⇒ A = Δd/2 = 0.500m/2 = 0.250 m (5)Please help me!!!!!!
Answer:
Gamma ray will get to the Earth first due to his frequency of transmission
a boy standing by a lake sees a fish in the pond and tries to thrust a spear into it he will success or not explain with reason
He will not probably success to thrust a spear into the fish in the pond because when light travels from water to air , it bends due to refractive property of light.
What is refraction of light?Refraction is the bending of a wave as it travels through different media. The two materials' different densities are what lead to the bending.
Refraction is defined as "the change in a wave's direction as it passes through a medium."
Although light refraction is one of the most frequently seen phenomena, refraction can also occur with sound and water waves. We can use optical tools like lenses, prisms, and magnifying glasses thanks to refraction. We can focus light on our retina because of the refraction of light, which is another benefit.
When light travels from water to air , it bends due to refractive property of light. So, he e will not probably success to thrust a spear into the fish.
Learn more about refraction here:
https://brainly.com/question/14760207
#SPJ2
A 430 kg motorcycle starts from rest and accelerates to a speed of 12 m/s.
Calculate the net work done on the motorcycle.
a. 42 kJ
b. 31 kJ
c. 38 kJ
d. 35 kJ
e. none of these
Answer:
Vi = 0
Vf = 12 m/s
ΔV = Vf - Vi
ΔV = 12 m/s
Change in kinetic energy
ΔKE = Kf - Ki
ΔKE = 1/2 mv^2 - 0
ΔKE = 1/2 * 430 kg * (12 m/s)^2
ΔKE = 30,960
ΔKE = 30,960 joules
Work = ΔK
Work = 30,960 J
A 41.0-kg crate, starting from rest, is pulled across level floor with a constant horizontal force of 135 N. For the first 15.0 m the floor is essentially frictionless, whereas for the next 12.0 m the coefficient of kinetic friction is 0.320. (a) Calculate the work done by all the forces acting on the crate, during the entire 27.0 m path. (b) Calculate the total work done by all the forces. (c) Calculate the final speed of the crate after being pulled these 27.0 m.
Answer:
Explanation:
From the information given;
mass of the crate m = 41 kg
constant horizontal force = 135 N
where;
[tex]s_1 = 15.0 \ m \\ \\ s_2 = 12.0 \ m[/tex]
coefficient of kinetic friction [tex]u_k[/tex] = 0.28
a)
To start with the work done by the applied force [tex](W_f)[/tex]
[tex]W_F = F\times (s_1 +s_2) \times cos(0) \ J[/tex]
[tex]W_F = 135 \times (12 +15) \times cos(0) \ J \\ \\ W_F = (135 \times 37 )J \\ \\ W_F =4995 \ J[/tex]
Work done by friction:
[tex]W_{ff} = -\mu\_k\times m \times g \times s_2 \\ \\ W_{ff} = -0.320 \times 41 \times 9.81 \times 12 \ J \\ \\ W_{ff} = -1544.49 \ J[/tex]
Work done by gravity:
[tex]W_g = mg \times (s_1+s_2) \times cos (90)} \ J \\ \\ W_g = 0 \ j[/tex]
Work done by normal force;
[tex]W_n = N \times (s_1 + s_2) \times cos (90) \ J[/tex]
[tex]W_n = 0 \ J[/tex]
b)
total work by all forces:
[tex]W = F \times (s_1 + s_2) + \mu_k \times m \times g \times s_2 \times 180 \\ \\ W = 135 \times (15+12) \ J - 0.320 \times 41 \times 9.81 \times 12[/tex]
W = 2100.5 J
c) By applying the work-energy theorem;
total work done = ΔK.E
[tex]W = \dfrac{1}{2}\times m \times (v^2 - u^2)[/tex]
[tex]2100.5 = 0.5 \times 41 \times v^2[/tex]
[tex]v^2 = \dfrac{2100.5}{ 0.5 \times 41 }[/tex]
[tex]v^2 = 102.46 \\ \\ v = \sqrt{102.46} \\ \\ \mathbf{v = 10.1 \ m/s}[/tex]