A particle undergoes three consecutive displacements, given by the following vectors: D1 = (3.8 mm)i + (-3.4 mm)j + (-2.2 mm)k, D2 = (2.9 mm)i + (-7.7 mm)j + (2.8 mm)k, and D3 = (-7.7 mm)i + (2.8 mm)j + (2.9 mm)k. A. What is the magnitude of the net displacement, in mm? B. What would have been the magnitude of the net displacement, in mm, if the three displacements (having the same magnitudes as D1, D2, and D3) were in the same direction?

Answer:

51.2 m/

Explanation:

The headwind will slow down the airplane and make it move slower relative to the ground     98.7 - 47.5 = 51.2 m/ relative to ground

The average shear stress developed in the shear plane where the collar A and shaft are connected is 50.265 kPa.

The average shear stress can be calculated using the formula:

τ_avg = F / A

where F is the applied axial force of 5 kN and A is the shear area.

The shear area can be calculated using the formula:

A = π * d * t

where d is the diameter of the shaft (60 mm) and t is the thickness of the collar (15 mm).

Substituting the values, we get:

A = π * 60 * 15 * 10^-6 m^2

Calculating the average shear stress:

τ_avg = 5 kN / (π * 60 * 15 * 10^-6 m^2) = 50.265 kPa

Therefore, the average shear stress developed in the shear plane where the collar A and shaft are connected is 50.265 kPa.

Learn more about shear stress here: brainly.com/question/30328948

#SPJ4

Two equations represent double replacement reactions are:

C. 2C2H6+7O2=4CO2 +6H2o

D. Ca+MgS=CaS+Mg

A metathesis reaction, sometimes referred to as a double exchange reaction, double replacement reaction, or multiple decomposition reaction, is a chemical reaction involving the exchange of bonds between two non-reacting chemical species resulting in the formation of products with the same type of bond. This reaction is illustrated by the following scheme:

A-B + C-D → A-D + C-B

A metathesis reaction involves the exchange of two groups or ions between the reactants.

The bond between reacting species can be either ionic or covalent. Usually, this reaction produces an insoluble product from the soluble reactant. This product is referred to as precipitate.

Learn more about double replacement reaction at https://brainly.com/question/11678166.

#SPJ4

The point between the two charges where the electric field equal to zero is calculated to be 0.32 m.

The charge q₁ is given as 2 μc = 2 × 10⁻⁶ c

It is located at x₁ = 0.

The charge q₂ is given as 5 μc = 5 × 10⁻⁶ c

It is located at x₂ = 1 m.

Let us suppose that, electric field is zero at the point x, it is in between 0 and 1 m.

We know the formula for electric field as,

E = k q /r²

Let us equate the electric field at both the charges.

k q₁/x² = k q₂/(x₂ - x)²

q₁ (x₂ - x)² = q₂ x²

2 × 10⁻⁶× (1 - x)² = 5 × 10⁻⁶× x²

2 × ( 1 + x² - 2x) = 5 × x²

2 + 2x² - 4x = 5x²

7 x² + 4x - 2 = 0

The two values of x are,

x = 0.32, -0.892

The distance cannot be negative. So, the electric field at x = 0.32 m is said to be zero.

Thus, the required value of x is 0.32 m.

To know more about electric field:

https://brainly.com/question/4273177

#SPJ4

A bond involves the sharing of electron pairs between atoms, also known as a molecular bond.

The given statement is True.

A covalent bond is a chemical relationship that requires the sharing of electrons between atoms to generate electron pairs. These electron couples are known as bonding pairs or sharing pairs. Covalent bonding is the steady equilibrium of attractive and repulsive forces between atoms when they share electrons.

The number of atoms that can be bound together to create molecules is fixed; for example, every water molecule has two hydrogen atoms and one oxygen atom. Chemical compounds are distinguished from solutions and other mechanical mixes by this property.

For more questions on molecular bond

https://brainly.com/question/819068

#SPJ4

This is repeated three times in 60 spaces, with a 1.5 m/s average speed.

The player runs a total distance of 30 m * 3 = 90 m in 60 s,

so the player's average speed is 90 m / 60 s = 1.5 m/s.

The size or extent of the displacement between two points is referred to as distance. Keep in mind that the distance between two points and the distance travelled between them are not the same. The length of the entire journey taken to go from one point to another is the distance travelled.

Calculating the ratio of the body's total distance traveled to the time needed to complete that distance yields the average speed formula. The formula describing the average speed of an item traveling at a variable speed is called an equation.

For such more question on average speed

https://brainly.com/question/6504879

#SPJ4

Note: The correct question would be as bellow,

In a drill during basketball practice, a player runs the length of the 30 meter court and back. The player does this three times in 60 seconds. The magnitude of the player's average velocity during the drill is...

The force of gravitational attraction between the man and woman is 1.0672 × 10⁻⁶ N, if the mass of the man & woman is 80 kg & 50 kg respectively.

Let the Mass of the man, m₁ = 80 kg

Mass of the woman, m₂ = 50 kg

Distance between them, d = 0.5 m

We know the universal gravitational constant, G = 6.67 × 10⁻¹¹ Nm²/kg²

According to Newton's law of gravitation, Gravitational force between two objects having mass m₁ & m₂ at a distance apart d meter, is mathematically formulated as, F = Gm₁m₂/d²

F = (6.67 × 10⁻¹¹ × 80 × 50)/0.5²

F = (2.668 × 10⁻⁷) /0.25

F = 1.0672 × 10⁻⁶ N

To know more about gravitational constant, here

https://brainly.com/question/858421

#SPJ4

The final speed of the wreckage after the collision is 17.5 km/h north.

The final speed of the wreckage after the collision is calculated by applying the principle of conservation of linear momentum.

m₁u₁ + m₂u₂ = v ( m₁ + m₂ )

where;

let north be positive and let south be negative direction

The final speed is calculated as follows;

(2 x 70) - (1.2 x 70) = v ( 2 + 1.2 )

56 = 3.2v

v = 56/3.2

v = 17.5 km/h north

Learn more about linear momentum here: https://brainly.com/question/7538238

#SPJ1

The lines in the emission spectrum of hydrogen are measured to become more widely spaced and longer in wavelength when the observer is moving away from the source of light.

This effect is known as redshift and is a result of the Doppler effect, which occurs when a light source is in motion relative to an observer.

As the observer moves away from the source of light, the wavelength of the emitted light is stretched, making the spectral lines appear longer and more widely spaced.

This is because the speed of light is reduced relative to the observer, causing the wavelength of the light to be longer than it would be in the rest frame of the observer.

Question should be like this

The lines in the emission spectrum of hydrogen are measured when observer moving away from the source of light ?

Know more about emission spectrum

https://brainly.com/question/27268130#

#SPJ11

when the velocity and acceleration of an object have opposite signs, the speed of the object increases, is true statement.

Velocity is a vector quantity that represents the rate of change of an object's position with respect to time, including both the speed and direction of motion. It is defined as the derivative of position with respect to time. Acceleration and velocity are closely related quantities in mechanics. Acceleration is defined as the rate of change of velocity over time. In other words, acceleration is the derivative of velocity with respect to time. When an object's velocity is increasing, its acceleration is positive, and when its velocity is decreasing, its acceleration is negative. If an object is moving at a constant velocity, its acceleration is zero.

To know more about Acceleration, visit:

https://brainly.com/question/12550364

#SPJ4

a. Kinetic Energy = 49j

b.  Potential Energy= 147 j

c. Mechanical Energy = 196 j

Kinetic energy of an object is the energy that it possesses due to its motion which is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity.

a. Kinetic Energy = 1/2 * m * v^2,

KE = 1/2 * 3kg * (7m/s)^2 = 49 J.

b. Potential Energy  = m * g * h,

PE = 3kg * 9.8 m/s^2 * 5m = 147 J.

c. Mechanical Energy  = KE + PE,

ME = 49 J + 147 J = 196 J.

Learn more about kinetic energy at: https://brainly.com/question/25959744

#SPJ1

Taking into account the definition of kinetic, potencial and mechanical energy, if a 3kg ball 5m in the air is moving at 7m/s, the kinetic energy is 73.5 J, the potential energy is 147.15 J and the mechanical energy is 220.65 J.

Kinetic energy is the energy possessed by a body or system due to its movement.

Kinetic energy is defined as the amount of work necessary to accelerate a body of a certain mass and in a position of rest, until it reaches a certain speed. Once the final speed is reached, the amount of kinetic energy accumulated will remain constant, that is, it will not vary, unless another force acts on the body again.

Kinetic energy is represented by the following expression:

Ec = 1/2×m×v²

Where:

Gravitational Potential Energy is the energy that an object possesses due to its position in a gravitational field and represents the potential that an object has to do work as a result of being located in a particular position within that gravitational field.

For an object with mass m, at height h, the expression applied to the gravitational energy of the object is:

Ep= m×g×h

Where:

Mechanical energy is that which a body or a system obtains as a result of the speed of its movement or its specific position, and which is capable of producing mechanical work. This is:

Potential energy + kinetic energy = total mechanical energy

The principle of conservation of mechanical energy indicates that the mechanical energy of a body remains constant when all the forces acting on it are conservative (a force is conservative when the work it does on a body depends only on the initial and final points and not the path taken to get from one to the other.)

In this case, you know:

Replacing the definition of kinetic energy:

Ec = 1/2×3 kg× (7 m/s)²

Solving:

Ec= 73.5 J

The kinetic energy is 73.5 J.

You know:

Replacing in the definition of potential energy:

Ep= 3 kg× 9.81 m/s²× 5 m

Solving:

Ep= 147.15 J

The potential energy is 147.15 J.

Being:

the mechanical energy can be calculated as:

Potential energy + kinetic energy = total mechanical energy

147.15 J + 73.5 J = total mechanical energy

Solving:

220.65 J = total mechanical energy

The mechanical energy is 220.65 J.

Learn more about kinetic energy, potential energy and mechanical energy:

brainly.com/question/17809741

#SPJ1

False. The terminator of a gene is located downstream of the coding region.The terminator of a gene is a DNA sequence that signals the end of transcription, or the process by which genetic information is converted from DNA to RNA.

It is located downstream of the coding region, which is the part of the gene that contains the instructions for making a particular protein. The terminator helps to regulate the amount of mRNA that is produced, as well as to prevent the production of unwanted transcripts. The precise location and sequence of the terminator vary among different genes, but its role in regulating transcription is an important aspect of gene expression.

Find out more about transcription

brainly.com/question/14136689

#SPJ4

The speed of a proton that is accelerated from rest through an electric potential difference of 144 V is 160 km/s.

Proton Electric field system as an isolated system for energy. Applying energy conservation: ΔK+ΔU=0

(1/2​ mp× vf² − 1/2mp​× vi² )−qp×​ ΔV=0. Where vi=0 since the proton is accelerated from rest, so, (1/2​ mp× vf²)−qp×​ ΔV=0. The electric potential difference,∆V= 144 volts. Now solving for vf=[(2×qp×∆V)/mp]^½ =[(2×1.602×10⁻¹⁹×144)/1.674×10⁻²⁷]^½  =16×10⁴ m/s = 160 km/s.

A proton has about 2000 times the mass of an electron, so it would have to travel at about ¹/₂₀₀₀ the speed of an electron to have the same momentum — 3.90×10⁶m/s2000 ≈ 2000 m/s and the same wavelength.

For further learning about the speed of accelerated proton, refer to the link:

https://brainly.com/question/18568230

#SPJ4

Given the power PP of an electric circuit is related to the circuit's resistance RR and current II by the equation P = RI^2

we want to find dP/dt, dR/dt and dI/dt if none of P, R and I are constant:

P = RI^2 = dP/dt = R. 2I dI/dt+I^2dR/dt = dP/dt = 2RIdI/dt= I^2dR/dt.

At the point when an electric current courses through a bulb or any conveyor, the channel offers a check to the current and this obstacle is known as electrical resistance and is indicated by R. Each material has an electrical resistance and this is the motivation behind why conveyors give out heat when current goes through it

As per Ohm's law, there is a connection between the current moving through a guide and the likely distinction across it. It is given by,

V ∝ I V = IR

Where,

V is the potential contrast estimated across the guide (in volts)

I is the current through the guide (in amperes)

R is the consistent of proportionality called resistance (in ohms)

to know more about ohm's law click here:

https://brainly.com/question/14296509

#SPJ4

The  tension in the string of a conical pendulum is 18.6 N.

The  tension in the string of a conical pendulum can be determined using the following formula:

T = mg(L / L + lcos(θ))

where:

The  tension in the string of a conical pendulum is calculated as

T = 2.5 x 9.8 x (0.68 / (0.68 + (2.5 x 9.8 x cos(35°)))

T = 18.6 N.

Learn more about tension in string here: https://brainly.com/question/24994188

#SPJ1

"What goes up must come down." is not newton's law. Option C is the correct option.

What is laws?

Laws of Physics are by definition stated facts that have been derived and inferred from empirical observations. Simply put, physical laws are a way to categorize how the world behaves and interacts with us.

Newton's laws are:

First law:

Unless a force acts upon a body that is at rest or moving in a straight line at a constant speed, it will continue to be at rest or move in that direction.

Second law:

A numerical description of the modifications to a body's motion that a force can cause. According to this, a body's momentum changes at a rate that is equal to the force acting on it over time in both magnitude and direction.

Third law:

When two bodies come into contact, they exert forces on one another that are both equal in strength and directed in opposing directions.

To learn more about Newton's laws, click on the below link:

https://brainly.com/question/29266206

#SPJ4

Answer:d

Explanation:magnet is to weak

Answer: that means to shut your trap you little turd

Explanation:

Answer:

Explanation:

Most corrosive materials are non-flammable, except for acetic acid and formic acid. However, nitric acid and perchloric acid are oxidizers and should be segregated from combustible and flammable materials. Corrosive materials can have other hazards, however, the corrosivity is usually the primary hazard.Flammable liquids burn at normal working temperatures while combustible liquids need heat before they will ignite All this info should help…. ✨

A.

The handle of the hammer could possibly have sweat or skin on it.

The maximum height reached by the ball which a student throws upwards is calculated to be 25 m.

The ball is going upward with a kinetic energy of 40 J and a potential energy of 60 J at a height of 15 m.

Let us find out the maximum height reached by the ball.

As potential energy is given as 60 J,

m g h = 60

m g (15) = 60

m g = 4 ----(1)

The total energy of the system at 15 meters is given as PE + KE = 100 Joules. From the conservation of energy the total energy in the system still remains the same at the maximum height, this is because energy cannot be generated or destroyed; it can be transformed from one type to other.

At the maximum height the velocity (v) of the system is 0, which means all its kinetic energy (KE) is converted to potential energy. Therefore the system consist only of potential energy.

KE + PE = 100

1/2 m v² + m g h = 100

Velocity v = 0 at the maximum height.

So, m g h = 100 ----(2)

From equation (1), m g = 4

Let us substitute in (2),

m g h = 100

4 h = 100

h = 25 m

Thus, the maximum height achieved by the ball is 25 m.

To know more about maximum height:

https://brainly.com/question/14280515

#SPJ4

The time cannot be calculated without those values but if we take R= 1 and C= 1, the switch opens at almost 4 milliseconds according to the question.

The time constant, τ, of the RC circuit would be τ = R × C = 1 × 1 = 1 (Where R denotes the resistance and C the capacitance).

The time it takes for the energy stored in the capacitor to fall to 79% of its final value after the switch opens is approximately equal to

4 × τ = 4 × 1 = 4 milliseconds.

After the switch opens, it takes around 4 times for the energy stored in the capacitor to decrease to 79% of its final amount.

Therefore, knowing the values of R and C is necessary in order to calculate the time in milliseconds. The time cannot be calculated without those values.

Learn more about time:

https://brainly.com/question/28050940

#SPJ4

As a result, the point charge q₄ experiences a net electrostatic force of 4.80 x 10⁻² N.

The sum of the forces exerted on the point charge q₄ by the three other point charges is the magnitude of the net electrostatic force on that charge:

We can use Coulomb's law to determine the magnitude of [tex]F_{net}[/tex] :

                                     [tex]F_{net}[/tex] = F₁₂ + F₁₃ + F₂

                             F is equal to k × |q₁×q₂ / r₂,

where k is the Coulomb's constant, q₁ and q₂ are the charges of the two points, and r is the distance between the points.

The side of the square is the distance r for F₁₂,

                                     so r = 30.0 cm.

                     F₁₂ = k × |(31.0 pC)× (-23.0 C) / (30.0 cm)²

F₁₃ and F₂₃ have the same equation, but the charges are different, so we can calculate them in the same way.

We can then add the three forces to get the net force on q₄:

F₁₃ = k × |(31.0 pC)× |(-45.0 °C)| / (30.0 cm)²

F₂₃ = k × |(-23.0 °C)× |(-45.0 °C)| / (30.0 cm)²

                              Fnet = F₁₂ + F₁₃ + F₂₃

Fnet = (k × |(31.0 pC) × (-23.0 C)| / (30.0 cm)2) + (k × |(31.0 pC) × (-45.0 C)| / (30.0 cm)²) + (k × |(-23.0 C) × (-45.0 C)| / (30.0 cm)²)

When the charges and the distance are substituted

The magnitude of the net electrostatic force exerted on the point

                                charge q₄ is 4.80 x 10⁻² N

Fnet = (8.99 x 10⁹ Nm²/C² × |(31.0 pC)×(-23.0 °C)| / (30.0 cm)²) + (8.99 x 10⁹ Nm²/C² × |(31.0 pC) × (-45.0 °C)| / (30.0 cm)²)

                                             [tex]F_{net}[/tex] = 4.80 × 10 ⁻²

When electrons are added to or taken away from an object, an electrical charge is created. When electrons are added to an object, it takes on a negative charge due to their negative charge. Positive charge is created when an object loses its electrons.

Learn more about Electric charge :

brainly.com/question/26100412

#SPJ4

It was Shiloh's initial archaeological dig. At the location, he found the most well-known relic.

From from 500 B.C. to roughly 1650 A.D., the Adena, Hopewell, and Fort Ancient Native American societies constructed mounds and enclosures in the Ohio River Valley for burial, religious, and occasionally defence purposes. In 1899, "Mound C" was penetrated by a trench that was built by Shiloh Park Commission chairman Cornelius Cadle. The first archaeological dig at Shiloh took place in 1350 CE, after which the site was abandoned. Around 1000 CE, indigenous people of the Late Woodland civilization first inhabited the area, followed by those of the Early Mississippian culture. The largest stone pipe carved into the form of a kneeling man was the most well-known relic he found at the location. Therefore, choice A is right.

Learn more about Mound C here:

https://brainly.com/question/30071912

#SPJ4

The electric field within the sphere is given by E = (4p/3) * (R^3 - r^3) / (R^2 - r^2). The electric field inside the slab is given by E = pd/2. The electric field at the center of the spherical cavity is given by E = pd/2 * (R/d)2.

Electric flux is the measure of the electric field through a particular surface in electromagnetism, despite the fact that an electric field cannot flow. At any location in space, the electric field E can impose a force on an electric charge. The gradient of the potential is represented by the electric field.

Here,

(a) According to Gauss's Law, the electric flux through any closed surface is proportional to the charge contained inside the surface. The electric field at a location inside a solid sphere may be computed by splitting the sphere into concentric shells and calculating the electric field owing to each shell. Inside the sphere, the electric field is given by:

E = (4πp/3) * (R^3 - r^3) / (R^2 - r^2)

(b) The electric field inside a charged slab may be calculated by splitting the slab into thin charge layers and adding the electric field owing to each layer. Inside the slab, the electric field is given by:

E = pd/2

(c) Subtracting the electric field owing to the slab from the electric field due to the entire space yields the electric field at the center of a spherical cavity in an indefinitely large charged slab. The electric field at the spherical cavity's center is given by:

E = pd/2 * (R/d)^2

The electric field inside the sphere is given by: E = (4πp/3) * (R^3 - r^3) / (R^2 - r^2). The electric field inside the slab is given by: E = pd/2. The electric field at the center of the spherical cavity is given by: E = pd/2 * (R/d)^2.

To know more about electric flux,

https://brainly.com/question/14544020

#SPJ4

The temperature of a 150-watt bulb having a surface area of 15 cm², a radius of 0.05 m, and an emissivity of 0.85 is 1200K.

According to the Stefan-Boltzmann law, P=eσAT⁴. The power of the bulb is 150 watts. The value of emissivity, e=0.85, and the radius, r=0.05m. The surface area, A= 15 cm²= 0.0015 cm². The value of the Boltzmann constant,σ =5.67×10⁻⁸ Wm² K⁴. So, the temperature,T⁴= P/eσA = 150/(0.85×5.67×10⁻⁸×0.0015) =(150×10⁸)/ (0.85×5.67×0.0015) = 20750×10⁸. Therefore Temperature,T= (20750×10⁸)^¼ = 1200 K.

So the temperature of the 150-watt bulb is 1200 K. Stefan-Boltzmann describes about the power that is radiated by a black body in terms of temperature. It states that the amount of radiation emitted by a black body per unit area is directly proportional to the fourth power of the temperature. While the typical situation is envisioned here is the radiation of a hot object to its cooler surroundings, this law is not limited here.

For further learning about Stefan Boltzmann's law, refer to the link:

https://brainly.com/question/14919749

#SPJ4

Proton is subject to a dipole-induced force of F = 32.40 10-15 N. [(proh-ton)] A positively charged elementary particle that can be found in the atom's nucleus.

A proton, a subatomic particle, is found in the nucleus of every atom. The particle has a positive electrical charge, similar to the electron but moving in the other direction. The H+ ion or the hydrogen atom's nucleus are examples of protons. Each hydrogen atom, regardless of isotope, has one proton, each helium atom, two, each lithium atom, three, and so on. The electron, which is negatively charged, is a very light particle. These electrons go around the nucleus in different orbits. Protons are positively charged particles that have a mass of about 1 amu. These positively charged particles are found in the center of the atom, the nucleus.

Learn more about proton from here:

https://brainly.com/question/1252435

#SPJ4

One way to write Coulomb's law is F = where F is the p2 magnitude of the electric force, k is a constant, Q and q are the two electrical charges and r is the distance between.

What is Coulomb's law?

Coulomb identified the following characteristics of the electric force for charges at rest: Contrary charges attract each other whereas like charges repel one another. Accordingly, two negative charges repel one another, but a positive charge pulls a negative charge toward it. In between the two charges, there is an area of attraction or repulsion.

What is electric charge?

Protons and electrons, which function as charge carriers, frequently carry both positive and negative electric charges. By moving charges, energy is produced. Charge—also referred to as electric charge, electrical charge, or electrostatic charge—is a property of a unit of matter in physics and is denoted by the letter q.

Therefore, One way to write Coulomb's law is F = where F is the p2 magnitude of the electric force, k is a constant, Q and q are the two electrical charges and r is the distance between.

Learn more about Coulomb's law from the given link.

https://brainly.com/question/506926

#SPJ4

Sonar (SOund Navigation And Ranging) uses sound waves to estimate water depth. It operates by producing a sound wave and monitoring how long it takes for the wave to bounce back after striking the ocean floor. The depth of the water may be determined based on this time measurement.

Sonar is a technology for navigating, measuring distances, communicating with, or detecting things on or beneath the water's surface, such as other vessels. Sonar (from "sound navigation range") is an acoustic technology for detecting and estimating the distance and direction of underwater objects. Sonar equipment detects and analyzes sound waves generated or reflected by the item for the information they convey. sonar.

Here,

Sonar (SOund Navigation And Ranging) does utilize sound waves to estimate water depth. It operates by sending out a sound wave and monitoring how long it takes for the wave to bounce back after reaching the ocean floor. The depth of the water may be determined using this time measurement.

To know more about SONAR,

https://brainly.com/question/20510435

#SPJ4

Option a. 8 is the correct answer because Four or fewer luminaire conductors, smaller than AWG size, and small EGCs.

It's essential to guarantee that crates or nooks that contain electrical associations have sufficient space to oblige the transmitters and hardware establishing conveyors (EGCs) without surpassing the case fill limits determined by the Public Electrical Code (NEC).

As per the NEC, four or less luminaire channels, less than American Wire Check (AWG) size, and additionally little EGCs that start in the luminaire and end in the container need not be counted while computing box fill.

This standard is intended to give a specific level of adaptability and diminish the intricacy of box fill estimations, particularly in lighting establishments where luminaire guides and little EGCs are usually utilized. Notwithstanding, it's vital to take note of that this avoidance just applies to the guides and EGCs referenced, and different guides and fittings that consume space inside the container actually should be thought about while computing box fill.

To learn more about electricity and magnetism, refer:

https://brainly.com/question/24309468

#SPJ4

Placing a conductor increases the force between two charges because in the case of glass or other dielectrics, the effective distance between two charges rises as opposed to decreasing.

Each charge repels the other. When a positive charge and a negative charge interact, their forces move from the positive to the negative charge in the same manner. Because of this, opposing charges are drawn to one another: the ensuing forces and electric field created by two electrical charges with different polarities.

Coulomb listed the following characteristics of the electric force for charges in a resting state: Unlike charges attract each other whereas like charges repel one another. the two positive charges attract a negative charge, while negative charges repel one another.

To know more about dielectrics visit:-

https://brainly.com/question/30523009

#SPJ1