A motor compressor unit with a rating of 32A is protected from overloads by a seperate overload relay selected to trip at not more than _____ of the rating.

Answer:

Here are some characteristics that describe customers who are more likely to have low assets and medium-low debt:

* **Age:** Younger customers are more likely to have lower assets and debt than older customers. This is because they have had less time to accumulate assets and may be carrying more student loan debt.

* **Income:** Customers with lower incomes are more likely to have lower assets and debt than customers with higher incomes. This is because they have less money to save and invest, and may be spending more of their income on necessities.

* **Education:** Customers with less education are more likely to have lower assets and debt than customers with more education. This is because they may have lower-paying jobs and may be less likely to save and invest.

* **Marital status:** Single customers are more likely to have lower assets and debt than married customers. This is because they may have less income and may be spending more of their income on housing and other expenses.

* **Employment status:** Unemployed customers are more likely to have lower assets and debt than employed customers. This is because they may have less income and may be spending more of their income on necessities.

* **Credit score:** Customers with lower credit scores are more likely to have lower assets and debt than customers with higher credit scores. This is because they may have difficulty qualifying for loans and may be paying higher interest rates on debt.

It is important to note that these are just general trends, and there are always exceptions. There are many factors that can affect a customer's assets and debt, including their personal circumstances, financial decisions, and economic conditions.

Explanation:

Chemical analysis cannot be used as a non-destructive testing method for steel castings and forgings. Chemical analysis involves taking a sample of the material and analyzing its chemical composition, which is a destructive testing method.

Radiography, magnetic particle testing, ultrasonic testing, and acoustic emission testing are all non-destructive testing methods that can be used for steel castings and forgings. Radiography involves passing high-energy radiation through the material and detecting any changes or defects in the material based on the resulting image. Magnetic particle testing involves applying a magnetic field to the material and detecting any changes or defects based on the magnetic properties of the material. Ultrasonic testing involves using high-frequency sound waves to detect any changes or defects in the material. Acoustic emission testing involves detecting and analyzing the sound waves produced by the material under stress to detect any defects or changes in the material.

To learn more about Chemical click on the link below:

brainly.com/question/13176828

#SPJ11

To calculate the perpetual equivalent annual worth in future dollars for years 1 through infinity, we can use the formula:To convert the CV dollars to future dollars, the CV amounts need to be multiplied by the inflation factor of 1.04.

AE = C*(1+i)/(i-g)

Where AE is the annual equivalent, C is the cash flow, i is the market interest rate, and g is the inflation rate.

For this problem, we have C = $50,000 + $5,000 = $55,000, i = 8%, and g = 4%.

AE = $55,000*(1+0.08)/(0.08-0.04) = $1,375,000

Therefore, the perpetual equivalent annual worth in future dollars for years 1 through infinity is $1,375,000.

(b) If the amounts had been quoted in CV dollars, we need to adjust for inflation to find the annual worth in future dollars. To do this, we can use the formula:

AW = CV*(1+g)

Where AW is the annual worth in future dollars, CV is the constant value, and g is the inflation rate.

For this problem, we have CV = $55,000, and g = 4%.

AW = $55,000*(1+0.04) = $57,200

Therefore, the annual worth in future dollars for CV dollars is $57,200.

Learn more about equivalent about

https://brainly.com/question/14672772

#SPJ11

To calculate the total harmonic distortion (THD) of the given sine wave, we need to find the root mean square (RMS) values of the fundamental and harmonic components of the signal.

THD = sqrt((V2^2 + V3^2 + ... + Vn^2) / V1^2) * 100% Where V1 is the RMS value of the fundamental component, and V2, V3, ..., Vn are the RMS values of the second, third, and higher-order harmonic components.In this case, the given sine wave has a fundamental frequency of 1 kHz and two harmonic components at 2 kHz and 3 kHz. We can calculate the RMS values using the formula:V_rms = V_p / sqrt(2)  Where V_p is the peak voltage of the component.

To learn more about harmonic click the link below:

brainly.com/question/30198365

#SPJ11

The given task is to make three updates to the Horse table in a MySQL database. The Horse table has four columns - ID, RegisteredName, Breed, Height, and BirthDate. The first update requires changing the height of the horse with ID 2 to 15.6.

The second update requires changing the registered name to Lady Luck and birth date to May 1, 2015, for the horse with ID 4. The third update requires changing every horse's breed to NULL for those horses born on or after December 22, 2016. To accomplish these updates, we can use the following SQL queries: UPDATE Horse SET Height = 15.6 WHERE ID = 2; This query updates the Height column of the Horse table for the row where the ID is equal to 2. The new value is set to 15.6. UPDATE Horse SET RegisteredName = 'Lady Luck', BirthDate = '2015-05-01' WHERE ID = 4; This query updates the RegisteredName and BirthDate columns of the Horse table for the row where the ID is equal to 4. The new value for RegisteredName is 'Lady Luck', and the new value for BirthDate is '2015-05-01'. UPDATE Horse SET Breed = NULL WHERE BirthDate >= '2016-12-22'; This query updates the Breed column of the Horse table for every row where the BirthDate is on or after December 22, 2016. The new value for Breed is set to NULL. To test the updates, we can use the following query: SELECT * FROM Horse ORDER BY ID; This query selects all columns from the Horse table and orders the result set by the ID column. This query can be used to verify that the updates have been made successfully.

Learn more about database here-

https://brainly.com/question/29412324

#SPJ11

Parts of equipment are constructed with a space between them so that they may move independently of each other, or they are securely in touch and do not move relative to each other.

The clearance is the distance between the hole and the shaft. The size difference between the pieces determines clearance.

The formula for calculating the clearance is:

Clearance = 0.06 x t x S

Where t is the thickness of the sheet and S is the shear strength of the steel.

Substituting the given values, we get:

Clearance = 0.06 x 2.4 mm x 300 MPa

Clearance = 43.2 micrometers

Therefore, the clearance required for successfully cutting the steel sheet is 43.2 micrometers or approximately 0.0432 mm.

To determine the required clearance for cutting a 2.4 mm thick, 1.25 m wide cold-rolled steel sheet with a yield strength of 175 MPa and shear strength of 300 MPa, you can use the formula:

Clearance = (Sheet Thickness) * (Clearance Percentage)

To know more about clearance visit:

https://brainly.com/question/14931095

#SPJ11

Based on the data provided in Table 4.3, it can be seen that the % transmittance readings of reduced DPIP increased over time for all four samples, indicating that the addition of succinate was not required in order for DPIP to be reduced.

This suggests that the mitochondria were actively respiring and producing NADH, which can then be used to reduce DPIP.To calculate the initial rate of each reaction, we can use the formula: dy/Ar, or (y2-y1)/(x2-x1), where dy is the change in % transmittance readings over a minimum five-minute period, and Ar is the number of minutes elapsed in that period. Using this formula, we can calculate the initial reaction rates for each sample and record them in Table 4.4.In terms of the oxidation/reduction reactions, succinate is being oxidized in this reaction, as it is donating electrons to the electron transport chain to produce NADH. Oxidation refers to the loss of electrons by a molecule, while reduction refers to the gain of electrons by a molecule.If we had isolated mitochondria from mouse skeletal muscle instead of lima beans, we would expect the data to be different due to differences in the metabolic activity and respiratory capacity of the two tissues. Mouse skeletal muscle is a more active tissue than lima beans and would likely have a higher rate of mitochondrial respiration and oxygen consumption. This would result in a faster reduction of DPIP and higher initial reaction rates.

Learn more about transmittance about

https://brainly.com/question/2084370

#SPJ11

For each modeling situation, the correct software type and a brief description are as follows:

1. Ideation - [Answer 2: Direct] - Direct modeling allows for quick, creative exploration of design concepts.
2. History Free - [Answer 5: Direct] - Direct modeling doesn't rely on feature history, making it easier to modify designs.
3. Preserve Design Intent - [Answer 1: Parametric] - Parametric modeling maintains relationships between features, ensuring design intent is preserved.
4. Multiple Configurations - [Answer 3: Parametric] - Parametric modeling supports multiple configurations, simplifying design variations.
5. Working with legacy data - [Answer 5: Direct] - Direct modeling can easily handle imported legacy data from different CAD systems.
6. Late Stage Design Changes - [Answer 6: Direct] - Direct modeling allows for flexible, quick adjustments during late stage design changes.

To know more about CAD systems visit:

brainly.com/question/12605103

#SPJ11

To solve this problem, we can use the formula for isentropic compression in an insulated piston:

p1/p2 = (T2/T1)^(k/(k-1))

where p1 and T1 are the initial pressure and temperature, p2 is the final pressure, k is the ratio of specific heats for steam (k = 1.4), and T2 is the final temperature we want to find.

Plugging in the given values, we get:

1/60 = (T2/120)^(1.4/(1.4-1))

Simplifying this equation, we get:

(T2/120)^0.4 = 0.01666667

Taking both sides to the power of 2.5, we get:

T2 = 120 x (0.01666667)^2.5 = 65.79°C

So the final temperature of the steam is 65.79°C.

To find the work done during the compression, we can use the formula:

W = m * Cv * (T1 - T2)

where m is the mass of the steam per kg, Cv is the specific heat at constant volume for steam (Cv = 0.718 kJ/kgK), and T1 and T2 are the initial and final temperatures in Kelvin.

Converting the given temperatures to Kelvin, we get:

T1 = 120 + 273.15 = 393.15 K
T2 = 65.79 + 273.15 = 338.94 K

Plugging in the values, we get:

W = 1 * 0.718 * (393.15 - 338.94) = 38.68 kJ/kg

So the work done during the compression is 38.68 kJ per kg of steam.

learn more about isentropic compression here:

https://brainly.com/question/14509952

#SPJ11

The rotating bending endurance limit and the 103-cycle fatigue strength of standard r.r. moore test specimens can be estimated based on the Brinell hardness of the steel used. The rotating bending endurance limit is defined as the maximum stress level at which the material can withstand an infinite number of cycles without failure, whereas the 103-cycle fatigue strength is the stress level at which failure occurs after 103 cycles of loading.

For steels with a Brinell hardness of 100, the rotating bending endurance limit can be estimated to be around 300 MPa, while the 103-cycle fatigue strength can be estimated to be around 150 MPa. For steels with a Brinell hardness of 300, the rotating bending endurance limit can be estimated to be around 800 MPa, while the 103-cycle fatigue strength can be estimated to be around 400 MPa. For steels with a Brinell hardness of 500, the rotating bending endurance limit can be estimated to be around 1200 MPa, while the 103-cycle fatigue strength can be estimated to be around 600 MPa. It should be noted that these estimates are based on empirical data and may vary depending on the specific material properties, loading conditions, and other factors. Additionally, it is important to note that fatigue failure can occur due to a variety of factors, including surface finish, stress concentration, and environmental factors. Therefore, it is important to carefully consider the specific application and loading conditions when estimating the fatigue properties of a material.

Learn more about endurance here-

https://brainly.com/question/29648238

#SPJ11

In an induction machine, the rotor resistance varies with the speed of the rotor due to the skin effect and the changing effective length of the rotor bars. To determine the equivalent rotor resistance at a different rotor speed, we can use the formula:

R2' = R2*(s'/s)where R2 is the rotor resistance at the reference speed s, R2' is the equivalent rotor resistance at a different speed s', and s and s' are the reference and new speeds, respectively.In this case, the reference speed is 1716 RPM and the rotor resistance at that speed is 3 Ohm. The new speed is 1750 RPM. Therefore, we can calculate the equivalent rotor resistance as:R2' = 3*(1750/1716) = 3.14 Ohm (rounded to one decimal place)Thus, the equivalent rotor resistance at a rotor speed of 1750 RPM is 3.14 Ohm.

To learn more about resistance  click on the link below:

brainly.com/question/18650040

#SPJ11

The probability of getting exactly 4 fours when a fair six-sided die is tossed five times is 0.0327, or about 3.27%.

Note that from the question,

Putting in these values into the equation will be :

P(X=4) = (5 choose 4) x (1/6)^4 x (5/6)^(5-4)

(5 choose 4) = 5! / (4! x (5-4)!)

= 5

Putting in the binomial coefficient and the values of p and (n-k):

P(X=4) = 5 x (1/6)⁴ x  (5/6)^(5-4)

≈ 0.0327

So, the probability of having exactly 4 fours when a fair six-sided die is tossed five times is approximately 0.0327, or about 3.27%.

Learn more about probability  from

https://brainly.com/question/24756209

#SPJ1

1. To print the first row of a two-dimensional array, we can use a loop to iterate through the columns and print out the value at the first index of each column. Here is a C function that accomplishes this: void printFirstRow(double arr[][3]) { for (int i = 0; i < 3; i++) { printf("%f ", arr[0][i]); } }

2. Similarly, to print the last row of a two-dimensional array, we can use a loop to iterate through the columns and print out the value at the last index of each column. Here is a C function that accomplishes this: void printLastRow(double arr[][3]) { for (int i = 0; i < 3; i++) { printf("%f ", arr[4][i]); } } 3. To print the odd rows of a two-dimensional array, we can use a loop to iterate through the rows and check if the row index is odd. If it is, we print out all the values in that row using another loop. Here is a C function that accomplishes this: void printOddRows(double arr[][3]) { for (int i = 0; i < 5; i++) { if (i % 2 != 0) { for (int j = 0; j < 3; j++) { printf("%f ", arr[i][j]); }  printf("\n"); } } } 4. To switch the order of elements in a selected row, we need to take in the row index and two column indices. We then swap the values at those column indices for the given row index.

Here is a C function that accomplishes this: void switchElementsInRow(double arr[][3], int row, int col1, int col2) { double temp = arr[row][col1];  arr[row][col1] = arr[row][col2]; arr[row][col2] = temp; } 5. To print the elements of a selected column, we can use a loop to iterate through the rows and print out the value at the given column index. Here is a C function that accomplishes this: void printColumn(double arr[][3], int col) { for (int i = 0; i < 5; i++) { printf("%f ", arr[i][col]);  } } 6. Finally, to swap two selected columns, we need to take in the two column indices and iterate through the rows, swapping the values at those column indices for each row. Here is a C function that accomplishes this: void switchColumns(double arr[][3], int col1, int col2) { for (int i = 0; i < 5; i++) { double temp = arr[i][col1]; arr[i][col1] = arr[i][col2]; arr[i][col2] = temp; } }.

Learn more about array here-

https://brainly.com/question/30757831

#SPJ11

Viscosity is the measure of a fluid's resistance to flow or deformity, stemming from the internal friction between its layers.

This phenomenon can be influenced by the molecular composition, temperature and pressure of the fluid. Yield stress, in contrast, describes the minimal force required to cause a material to move, commonly appearing in combination with a solid-fluid mixture, in entities such as pastes, gels, and slurries.

It is fairly frequent for one to find a relationship between viscosity and yield stress, with some materials having high viscosity and low yield stress; enabling them to flow under less pressure yet preventing any alteration when given more substantial forces.

Learn more about viscosity on

https://brainly.com/question/2568610

#SPJ1

In the USER_CONSTRAINTS view of an Oracle database, the CONSTRAINT_TYPE column shows the type of constraint defined on a column or a set of columns.

For a NOT NULL constraint, the value displayed in the CONSTRAINT_TYPE column will be C, which stands for CHECK constraint.

The other values that can appear in the CONSTRAINT_TYPE column are:

P for a PRIMARY KEY constraint

R for a FOREIGN KEY constraint

U for a UNIQUE constraint

V for a CHECK constraint that is defined using a user-defined function or a view

O for an OUT OF BOUND constraint (used for partitioning)

Learn more about constraint about

https://brainly.com/question/30703729

#SPJ11

During the physical design stage, there are three main steps that are typically performed: This includes deciding where each component will be located on the chip or board, how they will be connected, and how much physical space each component will require.

1. Partitioning: This involves breaking down the overall system into smaller, more manageable components. Each component can then be designed and optimized individually, which can improve the overall performance and efficiency of the system.

2. Floorplanning: This step involves determining the physical layout of the components within the system. This includes deciding where each component will be located on the chip or board, how they will be connected, and how much physical space each component will require.

3. Placement and Routing: Once the floorplan has been established, the next step is to place each component onto the chip or board and then determine the most efficient routing of connections between them. This can be a complex process that involves analyzing tradeoffs between factors like signal quality, power consumption, and physical distance. The end goal is to create a layout that meets all of the system's design requirements while minimizing the overall cost and complexity.

Learn more about component about

https://brainly.com/question/30324922

#SPJ11

To determine the maximum bolt preload that can be applied without exceeding the proof strength of the bolts, you need to know the proof strength of the bolts and the number of bolts in the joint.

The maximum bolt preload can be calculated by multiplying the proof strength of a single bolt by the number of bolts in the joint and then dividing by the cross-sectional area of the bolts. This will give you the maximum bolt preload that can be applied without exceeding the proof strength of the bolts.
To determine the minimum bolt preload that can be applied while avoiding joint separation, you need to know the coefficient of friction between the joint surfaces, the axial force on the joint, and the tensile strength of the bolts. The minimum bolt preload can be calculated by multiplying the coefficient of friction by the axial force on the joint and then dividing by the tensile strength of the bolts. This will give you the minimum bolt preload that can be applied while avoiding joint separation.
To determine the value of torque in units of lbf-ft that should be specified for preloading the bolts if it is desired to preload to 75% of the proof load, you need to know the proof load of the bolts and the diameter of the bolts. The torque required can be calculated by multiplying the proof load of the bolts by the diameter of the bolts and then multiplying by the coefficient of friction between the bolt head and the joint surface. This will give you the torque required to preload the bolts to 75% of the proof load.
To determine the yielding factor of safety for part c), you need to know the yield strength of the bolts and the preload applied to the bolts. The yielding factor of safety can be calculated by dividing the yield strength of the bolts by the preload applied to the bolts. This will give you the yielding factor of safety for part c) based on proof strength.

Learn more about bolts here:

https://brainly.com/question/15075481

#SPJ11

we can create a supersource that has edges of infinite capacity to all sources Then we can apply the standard max-flow algorithm to find the maximum flow from the supersource to the supersink.

To reduce (b) to the original max-flow problem, we can split each vertex v into two vertices v1 and v2, where v1 has edges of capacity ci to v2, and all incoming edges to v are redirected to v1, and all outgoing edges from v are redirected from v2. Then we can apply the standard max-flow algorithm to find the maximum flow from s1 to t2, which will give us the maximum flow that satisfies the vertex capacities.To reduce (c) to linear programming, we can introduce a variable xij for the flow on edge (i,j), and minimize the objective function Σxij subject to the following constraints: xij >= lij for all edges (i,j), xij <= cij for all edges (i,j), and for all nodes u, Σxuj - Σxju >= 0. The last constraint ensures that the flow entering node u is greater than or equal to the flow leaving node u.To reduce (d) to linear programming, we can introduce a variable xij for the flow on edge (i,j), and minimize the objective function Σcij(xij/(1-εi)). The constraints are the same as in (c), but the objective function takes into account the loss coefficient εi associated with node i.

Learn more about supersource about

https://brainly.com/question/14190915

#SPJ11

The maximum current that should be measured before the transformer is overloaded when the primary is connected to 480V is 2.4 amps.

To calculate the maximum current that should be measured before the transformer is overloaded when the primary is connected to 480V, we need to use the formula I = VA/V.
First, we need to convert the VA rating from 360VA to watts, which is 360VA x 0.8 (power factor for a transformer) = 288 watts.

Next, we need to determine the secondary voltage, which is 120V.

Using the formula, I = 288/120 = 2.4 amps.

Therefore, the maximum current that should be measured before the transformer is overloaded when the primary is connected to 480V is 2.4 amps.

To know more about current and electricity ,visit:

https://brainly.com/question/14672829

#SPJ11

For a wired LAN, one best design practice is to implement a structured cabling system.

This involves organizing and managing the network cables systematically, using standardized cabling techniques and components such as patch panels, cable organizers, and cable trays. A structured cabling system helps reduce network downtime, ensures easier maintenance, and provides flexibility for future expansions or changes in the network layout. On the other hand, a best design practice for a wireless LAN is to carefully plan the placement of access points (APs) to ensure optimal coverage and signal strength. This can be achieved through conducting a site survey to identify potential sources of interference, such as walls or other electronic devices, and using this information to strategically place APs. Proper placement ensures reliable connections and reduces dead spots, providing a seamless user experience throughout the network.

Regarding your request to comment on two posts, I am unable to interact with other users' posts as a question-answering bot. However, I hope the information I provided on wired and wireless LAN design practices is helpful to you.

Learn more about  LAN here: https://brainly.com/question/13247301

#SPJ11

Given that w is a palindrome, the statement "w minus its first character is a palindrome" is generally false. A palindrome is a string that reads the same forwards and backwards. Removing the first character from a palindrome may result in a non-palindromic string, as the symmetry would be disrupted.

A palindrome is a word, phrase, or sequence of characters that reads the same backward as forward. In other words, it remains the same even if read from the opposite direction. Palindromes are often used as exercises to test programming skills and logic, as they require an algorithm to determine if a given word or string of characters is a palindrome or not. Some examples of palindromic words are "racecar", "level", "deified", and "radar". Palindromes can also be longer phrases or sentences, such as "A man, a plan, a canal, Panama!" and "Madam, in Eden, I'm Adam."

Learn more about palindrome https://brainly.com/question/24304125

#SPJ11

A big-O estimate as possible for each of these functions are -

a) The highest degree of n in the first term is 2 and in the second term is 1. Therefore, the overall degree is 3. Thus, the big-O estimate for the function is O(n^3).
b) The highest degree of n in the first term is 2 and in the second term is 3. Therefore, the overall degree is 5. Thus, the big-O estimate for the function is O(n^5).
c) The highest degree of n in the first term is n! which grows much faster than any polynomial function of n. In the second term, the highest degree of n is 3. Therefore, the overall degree is n! + 3. Thus, the big-O estimate for the function is O(n!+3).

It's important to note that while big-O notation provides a useful upper bound on the growth rate of a function, it does not necessarily give an exact representation of its behavior. In some cases, other asymptotic notations such as big-Theta or big-Omega may be more appropriate.

Learn more about function  here: https://brainly.com/question/29050409

#SPJ11

Mathematically, it is given as:the COP for cooling of the vapor compression cooling machine is 4.

COP for cooling = Cooling output / Energy input

In this case, the cooling output is 4 kW and the energy input is 1 kW. Therefore, the COP for cooling can be calculated as:

COP for cooling = 4 kW / 1 kW = 4  The Coefficient of Performance (COP) for cooling of a vapor compression cooling machine is defined as the ratio of the cooling output to the energy input.

To learn more about machine click the link below:

brainly.com/question/15002511

#SPJ11

The type of insulation commonly used for work on flat roofs, basement walls, perimeter insulation at concrete slab edges, and in cathedral ceilings is rigid foam insulation. This includes materials like expanded polystyrene (EPS), extruded polystyrene (XPS), and polyisocyanurate. These insulations provide excellent thermal resistance and moisture protection, making them suitable for these applications.

For perimeter insulation at concrete slab edges, expanded polystyrene (EPS) foam board is often used. This type of insulation is similar to XPS, but it has a lower R-value and is not as moisture-resistant. However, EPS is less expensive than XPS and is still a good option for perimeter insulation.

Finally, for cathedral ceilings, one common insulation material is fiberglass batts. These are long strips of fiberglass insulation that are placed between the roof rafters or ceiling joists in the cathedral ceiling. Fiberglass batts are inexpensive and easy to install, but they can lose some of their effectiveness over time as they settle and compress.

To know more about polystyrene visit :-

https://brainly.in/question/8885742

#SPJ11

Maximum average power transfer, the load impedance should be equal to the complex conjugate of the source impedance. To determine the load impedance for maximum average power transfer, we can use the maximum power transfer theorem.

S = Vrms * Irms*

where S is complex power, Vrms is the RMS voltage, and Irms* is the complex conjugate of the RMS current.

The average power transferred to the load is the real part of the complex power:

P = Re(S)

I = V / (Zs + ZL)

where V is the voltage of the source.

S = V * I* = (V^2 / (Zs + ZL))*

P = Re(S) = V^2 / (2 * Re(Zs + ZL))

dP / dZL = -V^2 / (2 * (Re(Zs + ZL))^2) + V^2 / (2 * Re(Zs + ZL)^2) = 0

ZL = Zs*

To know more about visit :-

https://brainly.com/question/1532269

#SPJ11

A sleeve can be installed in a cast-iron block to repair a worn or cracked cylinder.

A sleeve, also known as a cylinder liner, is a cylindrical component that is inserted into the cylinder bore of an engine block to repair worn or cracked cylinders. The sleeve is made of materials such as cast iron, aluminum, or steel and is installed by pressing or casting it into the cylinder bore.

Installing a sleeve is an effective way to repair worn or cracked cylinders in a cast-iron block, as it allows the engine to be rebuilt without the need for extensive machining or replacement of the entire block.

To know more about engine visit:

https://brainly.com/question/1232655

#SPJ11

Given sentence: ''To change a logic gate to its alternate representation''  is False. Because to replace the gate with its opposite type (e.g. replace an AND gate with an OR gate, or a NAND gate with a NOR gate).

Logic is the study of correct reasoning. It includes both formal and informal logic. Formal logic is the science of deductively valid inferences

To change a logic gate to its alternate representation, a simple two-step process is followed:

Invert the output of the gate (change 1 to 0 or 0 to 1).

Replace the gate with its opposite type (e.g. replace an AND gate with an OR gate, or a NAND gate with a NOR gate).

There is no need for a third step.

For such more questions on logic family

https://brainly.com/question/29846683

#SPJ11

The power delivered to the primary is approximately 1146.067 kW.

Where P is power, V is voltage, and I is current. Since the transformer is 89% efficient, we know that:
P_out = 0.89 * P_in
V_in = 2200 V
V_out = 130 V
P_out = 1020 kW
V_in/V_out = I_out/I_in
2200/130 = I_out/I_in
I_in = (I_out * V_out)/V_in
I_in = (1020 kW * 1000)/(0.89 * 130 V)
I_in = 8,105 A
P_in = VI
P_in = 2200 V * 8,105 A
P_in = 18,831,000 W
P_in = 18,831,000 W / 1000
P_in = 18,831 kW
Power output (Secondary side) = 1020 kW
Efficiency = 89%
Efficiency = (Power output / Power input) x 100
Power input (Primary side) = Power output / (Efficiency / 100)
Power input (Primary side) = 1020 kW / (89 / 100)
Power input (Primary side) = 1020 kW / 0.89
Power input (Primary side) ≈ 1146.067 kW

To know more about power visit :-

https://brainly.in/question/11806521

#SPJ11

(a) Accurately locate a hole position: Reaming is a machining process that removes a small amount of material from the internal surface of a previously drilled hole.

b) Reaming is not used for creating a stepped hole, providing an internal thread, or improving tolerance on hole diameter.

(c) Enlarge a drilled hole: Reaming can also be used to enlarge a previously drilled hole to achieve a specific diameter.

(d) Improve surface finish on a hole: Reaming can improve the surface finish of a previously drilled hole, making it smoother and more even.

Reaming is used for the following three functions:

(a) Accurately locate a hole position: Reaming is a machining process that removes a small amount of material from the internal surface of a previously drilled hole. The process helps to improve the accuracy of the hole by ensuring that the diameter is consistent and round. This makes it easier to locate the hole position accurately.

b) Reaming is not used for creating a stepped hole, providing an internal thread, or improving tolerance on hole diameter.

(c) Enlarge a drilled hole: Reaming can also be used to enlarge a previously drilled hole to achieve a specific diameter. Reaming can produce a high-quality surface finish and a tight diameter tolerance, which makes it an ideal process for achieving precise hole size.

(d) Improve surface finish on a hole: Reaming can improve the surface finish of a previously drilled hole, making it smoother and more even. This can be important when a hole is used for a sliding or rotating part, as a rough surface can cause friction and wear.

Note that reaming is not used for creating a stepped hole, providing an internal thread, or improving tolerance on hole diameter. These functions are typically performed by other machining processes such as drilling, tapping, and honing.

For such more questions on reaming

https://brainly.com/question/28782231

#SPJ11