Answer:
sp3 hybrid orbitals
Explanation:
The formula of a molecule gives us an idea of its structure and the nature of hybrid orbitals that are involved in the formation of the molecule.
AX4 corresponds to tetrahedral geometry. If a molecule is in tetrahedral geometry, it is most likely sp3 hybridized as usual.
Hence, a molecule with the formula AX 4 uses sp3 hybrid orbitals to form its bonds
In some sheep, the presence of horns is produced by an autosomal allele that is dominant in males and recessive in females.A horned female is crossed with a hornless male. One of the resulting F1 females is crossed with a hornless male. What proportion of the male and female progeny from this cross will have horns?(5 marks)
Answer:
1/2 f1 will cross
Explanation:
answer it
In what kind of orbital do the lone-pair electrons on the nitrogen of dimethylacetamide reside, and is it in the same plane as the ch3 groups
Answer:
The lone pairs on nitrogen in dimethylacetamide reside in sp3 orbitals which are coplanar with the methyl groups
Explanation:
The compound dimethylacetamide consists of oxygen bearing two lone pairs of electrons and a nitrogen atom bearing a lone pair of electrons and has two methyl groups attached to the nitrogen atom.
The lone pair on the nitrogen atom is accommodated in an sp3 orbital of nitrogen as shown in the question. This sp3 orbital is coplanar with the two methyl groups.
Nickel + oxygen = nickel oxide. What is the balanced redox reaction?
Answer:
This is an oxidation-reduction (redox) reaction:
2 Ni0 - 4 e- → 2 NiII
(oxidation)
2 O0 + 4 e- → 2 O-II
(reduction)
Ni is a reducing agent, O2 is an oxidizing agent.
A buffer is prepared containing 0.75 M NH3 and 0.20 M NH4 . Calculate the pH of the buffer using the Kb for NH3. g
Answer:
pH=8.676
Explanation:
Given:
0.75 M [tex]NH_{3}[/tex]
0.20 M [tex]NH_{4}[/tex]
The objective is to calculate the pH of the buffer using the kb for [tex]NH_3[/tex]
Formula used:
[tex]pOH=pka+log\frac{[salt]}{[base]}\\[/tex]
pH=14-pOH
Solution:
On substituting salt=0.75 and base=0.20 in the formula
[tex]pOH=-log(1.77*10^{-5})+log\frac{0.75}{0.20}\\ =4.75+0.5740\\ =5.324[/tex]
pH=14-pOH
On substituting the pOH value in the above expression,
pH=14-5.324
Therefore,
pH=8.676
What is the phase of water at 0.25 atm and 0°C?
Water
(liquid)
Pressure (atm)
0.5-
0.25
Ice
(solid)
Water vapor
(gas)
0
000
Temperature (°C)
O A. Gas
O B. Solid and gas
O C. Solid and liquid
D. Solid
Water is in the solid phase at 0.25 atm and 0°C.
In what phase is water at 25?A pressure of 50 kPa and a temperature of 50 °C correspond to the “water” region—here, water exists only as a liquid. At 25 kPa and 200 °C, water exists only in the gaseous state.
What phase is water in at 0 C?Under standard atmospheric conditions, water exists as a liquid. But if we lower the temperature below 0 degrees Celsius, or 32 degrees Fahrenheit, water changes its phase into a solid called ice.
Learn more about the solid phase here https://brainly.com/question/13396621
#SPJ2
the question is in the attachment
Answer:
About redox reaction which of the given statements are true?
Explanation:
Redox reaction is the one in which both oxidation and reduction reactions take place simultaneously.
For example:
[tex]C(s)+O_2(g)->CO_2(g)[/tex]
In this reaction, carbon undergoes oxidation and oxygen undergoes reduction simultaneously.
During this reaction, mutual exchange of electrosn take place between the oxidant and the reductant.
Among the given options,
Option B. electrons are transferred
and
option C.They include both oxidation and reduction takes place are the correct answers.
Please help me, I don't bite. 3.
Answer:
jjjjjjjjj
Explanation:
hhhhhhhhhhh
Essentially all of the mass of an atom is due to the?
nucleons
electrons.
protons
Neutrons
Answer:
nucleons
Explanation:
The answer to the question is nucleons. Because there are both protons and neutrons in the nucleon, it will be heavier. Also, protons and neutrons are much heavier than the weight of an electron, because electrons float around the atom so it is not the answer. So, our final answer is actually option A.
Determine whether each phrase describes carboxylic acids or esters.
a. Usually have a sour odor _____________
b. Notable for their pleasant fragrances ___________
c. Do not form hydrogen bonds amongst themselves and have higher vapor pressure _____________
d. Their reactions with base are known as neutralizations ____________
e. Their reactions with base are known as saponifications _____________
PLEASE HELP FAST!!
Which of the following ions is formed when an acid is dissolved in a solution?
H+
O−
OH−
SO42+
Answer:
H+
Explanation:
acid produce H+ when it is dissolved in a solution
If the volume of the gas is increased to 9.6 L , what will the pressure be?
Methyl orange can change color by transitioning from one chromophore to another. When added to a clear solution and the solution turns red, it is determined to be a(n) __________ in its __________ stable form.
Answer:
acidic titration in its stable form
Explanation:
Methyl orange can change its color in titration solution. The yellow color is towards alkaline solution and red color is towards acidic solution. The Ph value of solution will change during this chemical process.
Acetic acid and water react to form hydronium cation and acetate anion, like this:
HCH3CO2(aq) + H2O → H3O+(l)(aq) + CH3CO2^-(aq)
Imagine 226 mmol of CH3CO2- are added to a flask containing a mixture of HCH3CO2, H2O, H3O + and CH3CO2- at equilibrium.
Required:
What is the rate of the reverse reaction before any CH3CO2^- has t:een added to the flask?
Answer:
The rate of the reverse reaction before any addition of CH3CO2- is zero
Explanation:
When the reaction is in equilibrium:
HCH3CO2(aq) + H2O ⇄ H3O+(l)(aq) + CH3CO2^-(aq)
The reaction quotient, Q = Ka and no more products or reactants are produced because their concentrations are in the right proportion.
Now, as no reaction occurs,
The rate of the reverse reaction before any addition of CH3CO2- is zeroA gas mixture is made by combining 8.7 g each of Ar, Ne, and an unknown diatomic gas. At STP, the mixture occupies a volume of 17.28 L. What is the molar mass of the unknown gas
Answer: Molar mass of the unknown gas is 73.153 g/mol.
Explanation:
Given: Mass of each gas = 8.7 g
Volume = 17.28 L
Let us assume that the molar mass of gas is m g/mol.
Molar mass of Ar is 40 g/mol and Ne is 20 g/mol.
Hence, total moles of each gas are as follows.
[tex](\frac{8.7}{40} + \frac{8.7}{20} + \frac{8.7}{m}) mol[/tex]
At STP, the total volume of these gases is as follows.
[tex](\frac{8.7}{40} + \frac{8.7}{20} + \frac{8.7}{m}) mol \times 22.4 L = 17.28 L\\(\frac{8.7}{40} + \frac{8.7}{20})22.4 L + \frac{8.7}{m} \times 22.4 L = 17.28 L\\14.616 + \frac{8.7}{m} \times 22.4 L = 17.28 L\\\frac{8.7}{m} \times 22.4 L = (17.28 L - 14.616)\\\frac{8.7}{m} \times 22.4 L = 2.664 \\m = 73.153 g/mol[/tex]
Thus, we can conclude that molar mass of the unknown gas is 73.153 g/mol.
b) What is the change in entropy of the reaction if ΔH° = -3.2 kJ mol-1?
I need help with the practice question at the bottom. Thank you.
Explanation:
For this question, we apply the equation: Q = mCp AT Where m is the mass of the substance, Cp
is its specific heat capacity and AT is the
temperature change. Q = 896 x 0.45 x (5-94)
Q = -35884.8 Joules
So about -36 kilojoules of heat is released.
mark as brainliest
determine the number of atoms of H in 35.0 grams of C2H4O2
Answer:
1.40x10^24 atoms of H
Explanation:
Name the following aldehyde PLEASE PLEASE HELP
Answer:
Explanation:
Answer is D 2,5-dimethylheptanal
You should accern the lowest possible number close to the parent name
Please help me ASAP I’ll mark Brainly
Answer:
cell
chloroplast and cell wall
nucleus
life processes
cell membrane
shape and size
vacuole
Hope it helps
What are the uses of Sulphuric acid?
Answer:
The major use of sulfuric acid is in the production of fertilizers, e.g., superphosphate of lime and ammonium sulfate. It is widely used in the manufacture of chemicals, e.g., in making hydrochloric acid, nitric acid, sulfate salts, synthetic detergents, dyes and pigments, explosives, and drugs.
The major use of sulfuric acid is in the production of fertilizers, e.g., superphosphate of lime and ammonium sulfate. It is widely used in the manufacture of chemicals, e.g., in making hydrochloric acid, nitric acid, sulfate salts, synthetic detergents, dyes and pigments, explosives, and drugs.
Which statement is true about how scientists draw conclusions from data?
A. Scientists do not allow others to make conclusions about their data.
B. Teams of scientists never share their data to help other teams draw conclusions.
C. Any two scientists will always come to the same conclusion about a data set.
D. Two scientists may have different underlying assumptions that lead them to different conclusions about the same data.
Answer:
D. Two scientists may have different underlying assumptions that lead them to different conclusions about the same thing.
Explanation:
It's all about how a person analyzes data. Some do it mathmatically while others do it logically. By doing it different ways, you may still come to the same conclusion, despite working at the problem in a different way.
20. What intermolecular forces would affect the interactions of water molecules? Explain why.
Answer:
Water has strong hydrogen bond dipole-dipole intermolecular forces that give water a high surface tension and a high heat of vaporization and that make it a strong solvent
1. A 225-L barrel of white wine has an initial free SO2 concentration of 22 ppm and a pH of 3.70. How much SO2 (in grams) should be added to the barrel to result in the required SO2 level
Answer:
The appropriate answer is "9.225 g".
Explanation:
Given:
Required level,
= 63 ppm
Initial concentration,
= 22 ppm
Now,
The amount of free SO₂ will be:
= [tex]Required \ level -Initial \ concentration[/tex]
= [tex]63-22[/tex]
= [tex]41 \ ppm[/tex]
The amount of free SO₂ to be added will be:
= [tex]41\times 225[/tex]
= [tex]9225 \ mg[/tex]
∵ 1000 mg = 1 g
So,
= [tex]9225\times \frac{1}{1000}[/tex]
= [tex]9.225[/tex]
Thus,
"9.225 g" should be added.
Write the number of sig. fig. in four numbers given in the sentence below. An (one) octopus has 8 legs. 13 octopi have 104 legs.
Give four answers.
A. Infinity, Infinity, Infinity, Infinity
B. 1, 1, 2, 3
C. Infinity, Infinity, 2, 3
D. No answer text provided.
Answer:
1, 1, 2, 3
Explanation:
The numbers 1 and 8 both have 1 sig. fig.
The number 13 has 2 sig. figs.
The number 104 has 3 sig. figs.
I mix together 50.0 mL of 0.100 M NaIO3, 50.00 mL of 0.100 M NaOH, and 10.0 mL of 0.100 M HIO3. What is the pH of the mixture
Answer:
pH = 12.66
Explanation:
The HIO3 reacts with NaOH as follows:
HIO3 + NaOH → H2O + NaIO3
The moles of HIO3 and NaOH added are:
Moles HIO3:
0.0100L * (0.100mol / L) = 0.00100 moles HIO3
Moles NaOH:
0.05000L * (0.100mol / L) = 0.00500 moles NaOH
As moles NaOH > Moles HIO3, the moles of NaOH that remain are:
0.00500mol - 0.00100mol = 0.00400 moles NaOH.
After the reaction you will have only NaOH and NaIO3. As NaIO3 is a salt, the pH of the solution is determined by only NaOH. Its concentration is:
Moles NaOH: 0.00500 moles NaOH
Volume: 50.0mL + 50.0mL + 10.0mL = 110.0mL = 0.110L
Molarity: 0.0455M NaOH = [OH-]
pOH = -log [OH-] = 1.34
pH = 14 - pOH
pH = 12.66pH is the measure of the hydrogen or the hydronium ion in an aqueous solution. The pH of the mixture containing sodium hydroxide is 12.66.
What is pH?pH is the potential of the hydrogen and is given as a negative log of the hydrogen concentration in the aqueous solution.
The balanced chemical reaction can be shown as:
[tex]\rm HIO_{3} + NaOH \rightarrow H_{2}O + NaIO_{3}[/tex]
Moles of iodic acid are calculated as:
[tex]\begin{aligned} \rm moles &= \rm molarity \times volume\\\\&= 0.100 \;\rm M \times 0.0100 \;\rm L \\\\&= 0.00100\;\rm moles\end{aligned}[/tex]
Moles of sodium hydroxide are calculated as:
[tex]\begin{aligned} \rm moles &= \rm molarity \times volume\\\\&= 0.100 \;\rm M \times 0.05000 \;\rm L \\\\&= 0.00500\;\rm moles\end{aligned}[/tex]
The remaining moles of sodium hydroxide are 0.00500mol - 0.00100mol = 0.00400 moles.
The pH of the mixture will be determined by sodium hydroxide, as sodium iodate is a salt.
The molar concentration of sodium hydroxide is calculated as:
[tex]\begin{aligned} \rm M &= \rm \dfrac{moles}{volume}\\\\&= \dfrac{0.00500}{0.110}\\\\&= 0.0455 \;\rm M\end{aligned}[/tex]
pH is calculated as:
[tex]\begin{aligned} \rm pOH &= \rm -log[OH^{-}] = 1.34\\\\\rm pH &= \rm 14 - pOH\\\\\rm pH &= 12.66\end{aligned}[/tex]
Therefore, 12.66 is the pH of the mixture.
Learn more about pH here:
https://brainly.com/question/13539106
she goes away change to negative form
She goes away.
Negative
She doesn't go away.
When Michelle's blood was testedthe chloride level was 0.45 g/dL. . What is this value in milliequivalents per liter? b. According to Table 9.6, is this value abovebelow within the normal range ?
Answer:
?what
Explanation:
i am having a hard time reading this
The equilibrium constant (K p) for the interconversion of PCl 5 and PCl 3 is 0.0121:
PCl5 (g) → PCl3 (g) + Cl2 (g)
A vessel is charged with PCl 5 giving an initial pressure of 0.123 atm and yields PCl 3 and Cl 2. At equilibrium, the partial pressure of PCl 3 is ________ atm.
A) 0.0782.
B) 0.0455.
C) 0.0908.
D) 0.0330.
E) 0.123.
Answer: At equilibrium, the partial pressure of [tex]PCl_{3}[/tex] is 0.0330 atm.
Explanation:
The partial pressure of [tex]PCl_{3}[/tex] is equal to the partial pressure of [tex]Cl_{2}[/tex]. Hence, let us assume that x quantity of [tex]PCl_{5}[/tex] is decomposed and gives x quantity of [tex]PCl_{3}[/tex] and x quantity of [tex]Cl_{2}[/tex].
Therefore, at equilibrium the species along with their partial pressures are as follows.
[tex]PCl_{5}(g) \rightarrow PCl_{3}(g) + Cl_{2}(g)\\[/tex]
At equilibrium: 0.123-x x x
Now, expression for [tex]K_{p}[/tex] of this reaction is as follows.
[tex]K_{p} = \frac{[PCl_{3}][Cl_{2}]}{[PCl_{5}]}\\0.0121 = \frac{x \times x}{(0.123 - x)}\\x = 0.0330[/tex]
Thus, we can conclude that at equilibrium, the partial pressure of [tex]PCl_{3}[/tex] is 0.0330 atm.
Calculate the Experimental Molar Volume in L/mol of the Hydrogen gas, H2, if the volume of H2 at STP is 52.8 mL and the mass of Magnesium metal, Mg, used in the experiment is 0.055 g.
Answer:
The Experimental Molar Volume in L/mol of the Hydrogen gas=23.36L/mol
Explanation:
We are given that
Volume of H2 at STP=52.8mL
Mass of magnesium metal ,M(Mg)=0.055g
We have to find the Experimental Molar Volume in L/mol of the Hydrogen gas.
Molar mass of Mg=24.305 g/mol
Number of moles=[tex]\frac{given\;mass}{molar\;mass}[/tex]
Using the formula
Number of moles of Mg=[tex]\frac{0.055}{24.305}[/tex]moles
Number of moles of Mg=0.00226moles
Number of moles of Mg=Number of moles of H2
Number of moles of H2=0.00226moles
Molar volume of Hydrogen gas (H2)=[tex]\frac{volume\;at\;STP}{No\;of\;moles\;H_2}[/tex]
Molar volume of Hydrogen gas (H2)=[tex]\frac{52.8}{0.00226}mL/mol[/tex]
Molar volume of Hydrogen gas (H2)=[tex]\frac{52.8}{0.00226}\times 10^{-3}L/mol[/tex]
[tex]1L=1000mL[/tex]
Molar volume of Hydrogen gas (H2)=23.36L/mol
Hence, the Experimental Molar Volume in L/mol of the Hydrogen gas=23.36L/mol
When we react a weak acid with a strong base of equal amounts and concentration, the component of the reaction that will have the greatest effect on the pH of the solution is: Select the correct answer below:_________
a. the reactant acid
b. the reactant base
c. the conjugate acid of the strong base
d. the conjugate base of the weak acid
Answer:
d. the conjugate base of the weak acid
Explanation:
The strong base (BOH) is completely dissociated in water:
BOH → B⁺ + OH⁻
The resulting conjugate acid (OH⁻) is a weak acid, so it remains in solution as OH⁻ ions.
By other hand, the weak acid (HA) is only slightly dissociated in water:
HA ⇄ H⁺ + A⁻
The resulting conjugate base (A⁻) is a weak base. Thus, it reacts with H⁺ ions from water to form HA, increasing the concentration of OH⁻ ions in the solution.
Therefore, the resulting solution will have a pH > 7 (basic).