A middle school teacher estimates that 170 parents will attend the back to school informational meeting. A total of 147 parents actually attended the meeting. What is the percent error of the teacher's estimate rounded to the nearest tenth of a percent

The circumference of the circle with a radius of 16 is 32π using formula for the circumference of a circle is C = 2πr.

The circumference of a circle is the distance around the perimeter of the circle. The formula for the circumference of a circle is C = 2πr, where C is the circumference, π is the constant pi, and r is the radius of the circle.

In this case, the radius of the circle is 16, so we can substitute this value into the formula and simplify:

C = 2πr

C = 2π(16)

C = 32π

This means that if we were to measure the distance around the perimeter of the circle, we would get a value of 32π units, where π is the irrational number approximately equal to 3.14159.

To learn more about circumference click on,

https://brainly.com/question/29845878

#SPJ4

The hypotheses for a chi-square test of independence on the data that auditors compared opinions about treatment (very good/acceptable/poor) at four VA hospitals (labeled a,b,c,d) among veterans aged 50 and above are:

Null hypothesis, H0: There is no association between the opinions about treatment of the VA hospitals and veterans aged 50 and above.

Alternative hypothesis, Ha: There is an association between the opinions about treatment of the VA hospitals and veterans aged 50 and above.

Hypothesis Testing is a type of statistical analysis in which you put your assumptions about a population parameter to the test. It is used to estimate the relationship between 2 statistical variables.

An analyst performs hypothesis testing on a statistical sample to present evidence of the plausibility of the null hypothesis. Measurements and analyses are conducted on a random sample of the population to test a theory. Analysts use a random population sample to test two hypotheses: the null and alternative hypotheses.

To learn more about null and alternative hypothesis refer :

https://brainly.com/question/27335001

#SPJ11

We can see that the linear approximation appears to be the best for function g since it is closer to g for a larger domain than it is to f and h. The approximation looks worst for function f since f moves away from Lf faster than g and h do. Hence, the linear approximation is the worst for function f.

Given that f(x) = (x - 1)^2, g(x) = e^(-2), and h(x) = ln(1+2x) - 2x.
(a) Find the linearizations of f, g, and h at a = 0.
The linearization of f at a = 0 is given by
Lf(x) = f(0) + f'(0)(x - 0)
     = (0 - 1)^2 + 2(0 - 1)(x - 0)
     = -x + 1
     The linearization of g at a = 0 is given by
Lg(x) = g(0) + g'(0)(x - 0)
     = e^(-2) + 0(x - 0)
     = e^(-2)
     The linearization of h at a = 0 is given by
Lh(x) = h(0) + h'(0)(x - 0)
     = (ln(1 + 2(0)) - 2(0)) + [(1/(1 + 2(0)))2 - 2](x - 0)
     = -2x
Graph f, g, and h and their linear approximations. For which function is the linear approximation best? For which is it worst? Explain.
The graphs of f(x) = (x - 1)^2, g(x) = e^(-2), h(x) = ln(1+2x) - 2x, and their respective linear approximations Lf(x) = -x + 1, Lg(x) = e^(-2), and Lh(x) = -2x.

For more questions on linear approximation

https://brainly.com/question/2254269

#SPJ11

Answer:

20.864

Step-by-step explanation:

8.15 x 4 is 32.6. I used a calculator but what I would do if I were solving on paper would be to double it, and then double it again.

Then, we divide 32.6 by five to get 6.52. I did this with a calculator, but if I were solving on paper, I would divide by 10 (move decimal point), and then double it.

Finally, we muliply 6.52 by 3.2. I did this with a calculator and got 20.864, but if I was doing this on paper, I would just solve using standard form!

Let me know if this helped by hitting brainliest! If you have any questions, comment and I'll get back to you ASAP.

Answer:

Stacy rented a truck for one day there was a base fee of $16.95 and there was an additional charge of 93 cents for each model driven. stacy had to pay $143.43 when he returned the truck. for how many miles did she drive the truck​

Step-by-step explanation:

Let's start by subtracting the base fee from the total cost:

$143.43 - $16.95 = $126.48

Now, we can divide the remaining cost by the cost per mile:

$126.48 ÷ $0.93/mile ≈ 136 miles

Therefore, Stacy drove the truck for approximately 136 miles.

The area of the prism is given by the sum of the areas of all the parts that compose the prism.

The parts that compose the prism are given as follows:

Hence the area of the prism is given as follows:

A = 3 x 5 + 5 x 10 + 2 x 1/2 x 3 x 10

A = 95 m².

The volume is given by the multiplication of the base area by the height, hence:

Thus:

V = 15 x 10 = 150 m³.

More can be learned about the area and the volume of a prism at https://brainly.com/question/463363

#SPJ1

Therefore , the solution of the given problem of unitary method comes out to be V has a value of -13/3.

By using preexisting variables, this common convenience, or all essential components from the initial Bishop malleable study that adhered to a specific methodology, the objective may be accomplished. If the term affirmation result does not occur, both essential components will event miss the statement; however, if it does, it then becomes possible to reach the entity once more.

Here,

TU = 4v and QR = 5v plus 17 allow us to write:

=> QR = TU + UP + PS + SR + RQ

Inputting the numbers provided yields:

=> 5v + 17 =  4v + UP + v + 26 + SR + 5v plus

When we simplify the solution, we obtain:

=> UP + SR + 6v + 26 = 0

Because UP and SR are opposite and equivalent, we can write:

=> UP = -SR

By replacing this in the preceding solution, we obtain:

=> UP - UP + 6v + 26 = 0

When we simplify the solution, we obtain:

=> 6v + 26 = 0

26 is subtracted from both parts to yield:

=> 6v = -26

When we multiply both parts by 6, we get:

=> v = -26/6

If we simplify, we get:

=> v = -13/3

V therefore has a value of -13/3.

To know more about unitary method visit:

https://brainly.com/question/28276953

#SPJ1

Answer:

29.12 square cm

Step-by-step explanation:

     Side = a = 8.2 cm

    [tex]\boxed{\bf Area \ of \ equilateral \ triangle = \dfrac{\sqrt{3}}{4}a^2}[/tex]

                                                       [tex]\sf = \dfrac{\sqrt{3}}{4}*8.2*8.2\\\\= \sqrt{3}*4.1 * 4.1\\\\= 1.732 * 4.1 *4.1\\\\= 29.12 \ cm^2[/tex]

Answer:

x = 36

Step-by-step explanation:

[tex] \frac{12}{14} = \frac{x}{42} [/tex]

[tex]x = 36[/tex]

[tex]42 \div 14 = 3[/tex]

[tex]3 \times 12 = 36[/tex]

[tex]8700[/tex] cubic feet of airflow are required for the entire home. Jackson may utilize this information to determine the best furnace size for the customer's requirements.

Volume is the quantity of space an object occupies, whereas capacity is a measurement of the substance—such as a solid, liquid, or gas—that an object can hold. While capacity may be measured in virtually any other unit, such as liters, gallons, pounds, etc., volume was determined in cubic units.

Volume, which is measured in cubic units, is the three dimensional space inhabited by material or surrounded by a surface. The cubic centimeter (m3), a derived unit, is the SI unit for volume.

Volume of the first section with height [tex]H1=10[/tex] ft:

[tex]V1 = WLH1 = (20 ft)(30 ft)(10 ft) = 6000[/tex] cubic feet

Volume of the second section with height [tex]H2=9[/tex] ft:

[tex]V2 = (1/2)WLH2 = (1/2)(20 ft)(30 ft)(9 ft) = 2700[/tex]cubic feet

Total volume of house,

[tex]V total = V1 + V2 = 6000[/tex] cubic feet + [tex]2700[/tex] cubic feet [tex]= 8700[/tex] cubic feet

Therefore, the volume of airflow needed for the house is [tex]8700[/tex] cubic feet.

To know more about volume visit:

https://brainly.com/question/1578538

#SPJ1

The probability that the second dice lands on an even number given that the first one landed on an odd number is 1/2 or 0.5.

Step-by-Step Explanation:Let A be the event that the first dice rolls an odd number, and let B be the event that the second dice rolls an even number. We want to find P(B|A), which is the probability of B given A. This can be found using the formula:P(B|A) = P(A and B) / P(A) We know that P(A) = 1/2, as half the numbers on a six-sided dice are odd.

To find P(A and B), we need to find the probability that both dice roll the desired numbers simultaneously. Since we know that the first dice rolled an odd number, only half of the numbers are possible for the second dice to be even. Therefore, P(A and B) = 1/2 x 1/2 = 1/4. So:P(B|A) = P(A and B) / P(A) = (1/4) / (1/2) = 1/2 or 0.5. Therefore, the probability that the second dice lands on an even number given that the first one landed on an odd number is 1/2 or 0.5.

See more about probability at: https://brainly.com/question/13604758

#SPJ11

a country exports crayfish to overseas markets. the buyers are prepared to pay high prices when the crayfish arrive still alive. if x is the number of deaths per dozen crayfish, the probability distribution for x is given by: a. Find k. b. Over a long period

A. To find k, you need to calculate the expected value of the random variable x, which is the number of deaths per dozen crayfish. This can be done by summing up the products of all the values of x multiplied by their respective probabilities. Thus,

                    k = ∑(xi * Pi)

                      = (1 * 0.3) + (2 * 0.3) + (3 * 0.2) + (4 * 0.2)

                      = 2.6

B. The mean number of deaths per dozen crayfish is given by the expected value of x, which is 2.6.

C. To find the standard deviation for the probability distribution, we need to calculate the variance of x. This can be done using the formula,

                 σ2 = ∑((xi - k)2 * Pi)

                      = (0 - 2.6)2 * 0.3 + (1 - 2.6)2 * 0.3 + (2 - 2.6)2 * 0.2 + (3 - 2.6)2 * 0.2

                      = 0.84

Therefore, the standard deviation for the probability distribution is σ = √0.84 = 0.92.

#SPJ11

Learn more about standard deviation for the probability distribution at: https://brainly.com/question/18804692

The explicit function defines this arithmetic sequence:

    C.  f(n) = 8n − 359

Explicit Function:

An explicit function is a function expressed with arguments. For example, y = 4x – 7 is self-explanatory, where y is the dependent variable and depends on the independent variable x.

According to the Question:

The first element of the given arithmetic sequence is -351, and the tolerance is (-343 -(-351)) = 8. The tolerance is a multiplier of n in the explicit function.

We can identify the appropriate explicit function by finding the one that correctly describes the sequence. Evaluating each for n=1 is sufficient.

(A) f(1) = 8 -351 = -343

(B) f(1) = -8 -351 = -359

(C) f(1) = 8 -359 = -351

(D) f(1) = -8 +359 = 351

The sequence is defined by the explicit function :

                  f(n) = 8n -359

Learn more about Sequence:

https://brainly.com/question/30262438

#SPJ4

If Maria state that (-4,2) (2,4),(2,-2),(-4,-1) are the coordinate pairs of the vertices of her figure, then the area of her quadrilateral figure is equals to the 9 sq. units.

A quadrilateral is a four-sided and 2D geometrical figure whose sum of all the four internal angles is 360°. Also, it has 4 edges and four vertices (or corners). Let's consider the vertices of a quadrilateral ABCD be A( x₁,y₁), B(x₂,y₂), C(x₃,y₃), D(x₄,y₄). The area of quadrilateral ABCD is written as A = (1/2) |(x₁y₂ + x₂y₃ + x₃y₄ + x₄y₁) – (x₂y₁ + x₃y₂ + x₄y₃ + x₁y₄)|

Now, Maria defines a quadrilateral with the following vertices (-4,2),(2,4),(2,-2),(-4,-1). After comparing these vertices with (x₁,y₁),(x₂,y₂), (x₃,y₃), (x₄,y₄), we see, x₁ = -4 ,y₁ = 2, x₂ = 2, y₂ = -2, x₃ = 2, y₃ = -2, x₄ = -4, y₄ = -1. Substitute all known values into above formula, Area of her quadrilateral figure, A = (1/2)|((-4)(-2) + 2(-2) + 2(-1) + (-4)2) – (2×2 + 2×(-2) + (-4)(-2) + (-4)(-1))|

= (1/2)|( 8 - 4 - 2 - 8) - (4 - 4 + 8 + 4)|

= (1/2)|-6 - 12| = 9 sq. units

Hence, required area of quadrilateral is 9 sq. units.

For more information about area of quadrilateral, visit :

https://brainly.com/question/28417970

#SPJ4

Complete question:

Maria states that (-4,2) (2,4),(2,-2),(-4,-1) are the coordinate pairs of the vertices of her figure. Calculate the area of her figure.

The B) constant variance assumption requires that all variation around the regression line should be equal at all possible values (levels) of the independent variable.

The constant variance assumption, also known as homoscedasticity, requires that the variance of the residuals (i.e., the differences between observed and predicted values) should be approximately the same across all levels of the independent variable.

This assumption is necessary for valid statistical inference in linear regression analysis because violations of constant variance can result in biased estimates of the regression coefficients and incorrect hypothesis tests.

The independent variable is the variable that is used to predict the dependent variable. The constant variance assumption applies to the residuals at all possible values of the independent variable. Therefore, the correct answer is B. constant variance, independent.

For more questions like Variable click the link below:

https://brainly.com/question/17344045

#SPJ11

A vertical bar chart that shows frequency on the y-axis is called a histogram. It is a graph showing the distribution of continuous data.

Histograms are used to give an estimate of the probability distribution of a continuous variable sample. Additionally, a subset or part of a population is called a sample. A population is divided into groups, and some groups are selected, and all observations from each selected group are included in the sample. This is called stratified random sampling.

A collection of all data that is of interest is known as the universe.

A collection of attributes, labels, or nonnumerical entries is known as categorical data. This type of data is descriptive in nature, as it allows us to identify what features the data has or belongs to. For instance, age group, gender, and occupation are examples of categorical data. A sample where the population is divided into groups and several are randomly sampled from each group is called a cluster sample. Cluster sampling is an excellent method for conducting a survey when the population is widespread and heterogeneous.

To know more about the "Histogram": https://brainly.com/question/25983327

#SPJ11

Based on the exponential decay equation, the number of employees for the company that has been decreasing yearly by 5%, will in 10 years be approximately 515.

The exponential decay equation or function gives the value in t years that has a constant ratio of decrease.

Exponential decay equation is one of the two exponential functions.  The other is the exponential growth equation.

The annual decrease in the number of employees = 5%

The current number of employees in the company = 860

The expected time = 10 years.

The exponential decay equation is as follows, y = 860 x 0.95^10.

y = 860 x 0.95^10 = 515

Learn more about exponential functions at https://brainly.com/question/30127596

#SPJ1

Option (c) 1/3 is the correct answer.Let us first understand the given problem,It is given that the fair 6-sided die is rolled and let X indicates the event that an odd number is rolled and Y indicates the event that 3,4, or 5 is rolled.

P(X=0,Y=1)Solution:When an odd number is not rolled, then an even number is rolled. So, the possible even numbers that can be rolled on a die are 2,4 and 6. Therefore,X = 0, when an even number is rolledY = 1, when 3, 4 or 5 is rolledLet's find P(X=0,Y=1).P(X = 0, Y = 1) = P(rolling 4) = 1/6The sample space for a fair die will be {1,2,3,4,5,6}.

The odd numbers are {1,3,5}. Therefore,P(X = 1) = probability of getting an odd number= 3/6 = 1/2 (3 possible odd numbers out of 6)P(X = 0) = probability of getting an even number= 3/6 = 1/2 (3 possible even numbers out of 6)P(Y = 1) = probability of getting 3, 4, or 5= 3/6 = 1/2 (3 possible numbers out of 6)P(Y = 0) = probability of getting 1, 2, or 6= 3/6 = 1/2 (3 possible numbers out of 6)P(X = 0, Y = 1) = P(rolling 4) = 1/6. Therefore, P(X=0, Y=1) = 1/6Therefore, option (c) is correct.

Learn more about odd number:

https://brainly.com/question/31057068

#SPJ11

a)  When x = 6 and y = 8, and dx/dt = 4, the value of dy/dt is -3.

Using implicit differentiation, we have:

2x(dx/dt) + 2y(dy/dt) = 0

Solving for dy/dt, we get:

dy/dt = -(x/y)(dx/dt)

Substituting x = 6, y = 8, and dx/dt = 4, we get:

dy/dt = -(6/8)(4) = -3

Therefore, when x = 6 and y = 8, and dx/dt = 4, the value of dy/dt is -3.

b) Using implicit differentiation again, we have:

2x(dx/dt) + 2y(dy/dt) = 0

Solving for dx/dt, we get:

dx/dt = -(y/x)(dy/dt)

Substituting x = 8, y = 6, and dy/dt = -2, we get:

dx/dt = -(6/8)(-2) = 1.5

Therefore, when x = 8 and y = 6, and dy/dt = -2, the value of dx/dt is 1.5.

To find the values of dy/dt and dx/dt, we used implicit differentiation, which is a technique used to find the derivative of an equation that is not expressed in the form y = f(x).

In this case, we had the equation x^2 + y^2 = 100, and we differentiated both sides of the equation with respect to t. Then, we solved for the required derivative using the given values of x, y, and the other derivative.

For more questions like Function click the link below:

https://brainly.com/question/12431044

#SPJ11

Answer:  Vertical asymptote = 2

                Horizontal asymptote = 1

                y intercept = ( 0, 5/2 )

                x intercept = ( 5,0 )

Other points of graph = ( 3,-2 )

                                      = ( 4,-1/2 )

                                      = ( -1, 2 )

                                      = (-2,7/4 )

                                      = ( -3 , 8/5 )

Step-by-step explanation:  

Answer:

I hope this helps please rate my answer

Step-by-step explanation:

2/5×60

2×12=24

Answer: The cost of painting is Rs.254.4

Step-by-step explanation:

let  l and b be the sides

        b=3m 20 cm=3.20m    

                                          = 5.30×3.20

                                           =16.96m²

We are given that, the measures of sides of blackboard are 5 m 30 cm and 3m 20 cm.

__________________________________________

[tex] \bf \implies5 m + 30 cm \\ [/tex]

[tex] \sf \implies 5 m + \dfrac{30}{100}m \\ [/tex]

[tex] \sf \implies 5 m + \dfrac{3\cancel{0}}{10\cancel{0}}m \\ [/tex]

[tex] \sf \implies 5 m + 0.3 m \\ [/tex]

[tex]\purple{ \bf \implies 5.3~ m } \\ [/tex]

[tex] \bf \implies3 m + 20 cm \\ [/tex]

[tex] \sf \implies 3 m + \dfrac{20}{100}m \\ [/tex]

[tex] \sf \implies 3 m + \dfrac{2\cancel{0}}{10\cancel{0}}m \\ [/tex]

[tex] \sf \implies 3 m + 0.2 m \\ [/tex]

[tex] \purple{\bf \implies 3. 2 ~m} \\ [/tex]

_______________________________________________

[tex] \pink{\frak{\implies Area _{(Blackboard) }= Length \times Breadth ~m^2}} \\ [/tex]

[tex] \sf \implies Area _{(Blackboard) } = 5.3 \times 3.2 ~m^2 \\ [/tex]

[tex] \sf \implies Area _{(Blackboard) } = 16.96 m^2 \\ [/tex]

[tex] \sf \implies 15 \times 16.96 \\ [/tex]

[tex] \pink{\sf \implies Rs ~254.4 } \\ [/tex]

The order from narrowest to widest is: C) z-interval. A) t-interval with 6 degrees of freedom. B) t-interval with 2 degrees of freedom.

In statistics, the likelihood that a population parameter will fall between a set of values for a certain percentage of the time is referred to as a confidence interval. Analysts frequently employ confidence ranges that include 95% or 99% of anticipated observations. So, it may be concluded that there is a 95% likelihood that the real value falls within that range if a point estimate of 10.00 with a 95% confidence interval of 9.50 - 10.50 is derived using a statistical model.

A confidence interval's breadth is influenced by the sample size and degree of confidence. Higher confidence levels often result in broader intervals, whereas bigger sample numbers typically result in narrower intervals.

In this instance, the three intervals have different degrees of freedom but the same 88% confidence level.

Hence, The order from narrowest to widest is: C) z-interval. A) t-interval with 6 degrees of freedom. B) t-interval with 2 degrees of freedom.

Learn more about confidence interval here:

https://brainly.com/question/29680703

#SPJ1

Answer: D - 216 miles

Explanation: The rest stop is the y-intercept in the graph because that is when he begins to travel home at a constant speed. Looking at the graph, the y-intercept falls right before 220 so the closest answer would be 216 miles.

The equation of line B is y = (1/5)x + 0, which can be simplified to y = (1/5)x.

An equation is a statement that shows the equality between two expressions. It typically contains one or more variables and may involve mathematical operations such as addition, subtraction, multiplication, division, exponentiation, or roots. An equation can be solved by finding the value(s) of the variable(s) that make the equation true. Equations are used extensively in mathematics, science, engineering, and other fields to describe relationships between different quantities and to make predictions or solve problems.

Here,

Since line B is perpendicular to line A, the product of their gradients is -1. Therefore, the gradient of line B is 1/5.

a) To find the y-intercept of line B, we need to know a point on the line. Since we don't have one, we can use the fact that the y-intercept is the point where the line intersects the y-axis. To find this point, we can set x = 0 in the equation of line B:

y = (1/5)x + c

0 = (1/5)(0) + c

c = 0

Therefore, the y-intercept of line B is (0,0).

b) The equation of line B is y = (1/5)x + 0, which can be simplified to y = (1/5)x.

To know more about equation,

https://brainly.com/question/2228446

#SPJ1

Answer: 24

Step-by-step explanation:

the length of the steel beam is approximately 31.4 meters to the nearest meter.

The length of the steel beam is equal to the circumference of the semi-circle formed by bending the beam into the shape of an arch.

The formula for the circumference of a circle is:

C = πd

Where C is the circumference, π is the value of pi, and d is the diameter of the circle.

Since the arch is a semi-circle, the diameter is equal to the span of the arch, which is 20m. So we can calculate the circumference of the arch as follows:

C = πd/2

= 3.14 x 20m / 2

= 31.4m

Therefore, The steel beam measures, to the nearest meter, 31.4 meters in length.

To learn more about circumference click here

brainly.com/question/28757341

#SPJ4

Complete Question

An arch of a bridge is made by bending a steel beam into the shape of a semi circle, if the span (diameter) of the arch in 20m, use the value 3.14 for pi to find the length of the steel beam to the nearest meter.

Answer:

45 yo

Step-by-step explanation:

Let's start by defining some variables to represent the ages of Ted and Rosie:

- Let's call Ted's current age "T"

- Let's call Rosie's current age "R"

From the problem statement, we know that:

- Ted is five times as old as Rosie was when Ted was Rosie's age. Written as an equation, this becomes:

T = 5(R - (T - R))

Simplifying this equation, we get:

T = 5(R - T + R)

T = 10R - 5T

- When Rosie reaches Ted's current age, the sum of their ages will be 72. Written as an equation, this becomes:

R + T = 72 - T

We now have two equations with two variables. We can use substitution to solve for T.

Substitute the second equation into the first equation to eliminate R:

T = 10R - 5T

T = 10(72 - T) - 5T

T = 720 - 15T

16T = 720

T = 45

Therefore, Ted's current age is 45.

The correct answer is p=62

Daniel's pay for the week was $504.00, which includes his hourly pay and his commission on direct phone sales.

To calculate Daniel's pay for the week, we need to find his total earnings, which include his hourly wage and his commission on direct phone sales.

First, let's calculate his commission on direct phone sales. We know that he received $72.00 in commissions, and we also know that his commission is six percent of his sales. So, we can use the formula:

Commission = Sales x Commission Rate

To find his sales, we can rearrange the formula to:

Sales = Commission / Commission Rate

Plugging in the given values, we get:

Sales = $72.00 / 0.06 = $1200.00

So, Daniel's direct phone sales for the week were $1200.00.

Now, let's calculate his hourly pay. He worked for 48 hours at a rate of $9.00 per hour, so his hourly earnings were:

Hourly Pay = Hours Worked x Hourly Rate

Hourly Pay = 48 x $9.00 = $432.00

Finally, we can add his commission and his hourly pay to find his total earnings for the week:

Total Pay = Hourly Pay + Commission

Total Pay = $432.00 + $72.00

Total Pay = $504.00

To learn more about pay click on,

https://brainly.com/question/3473007

#SPJ4